European network of stockholding machinery dealers

Category:
    Manufacturer:
      Machines:
        Trader:

          CNC Turning- and Milling Center

          Machinelist: CNC Turning- and Milling Center


          CNC Turning- and Milling Center

          used Lathes CNC Turning- and Milling Center OPTIMUM OPTIturn S 600 CNC


          • Stiens Werkzeugmaschinen GmbH
          • Mittelweg 92
          • 59302 Oelde
          • Deutschland

          • +49 252283490
            (0049) - 2522 - 8349-20
          • info@stiens.de
            www.stiens.de
          #1039-8702 · CNC Turning- and Milling Center

          OPTIMUM - OPTIturn S 600 CNC - - 2020 - Sinumerik 828D Siemens

          Technical details
          turning diameter max. 500 mm︱turning length 460 mm︱control Sinumerik 828D Siemens︱greates pass round over bed 500 mm︱Swing dia. over traverse guideway 220 mm︱standard turning dia. 215 mm︱Main spindle: ︱turning speed range - main spindle 10 - 4.000 min/-1︱power capacity - main spindel 30 / 12 kW︱max. Torque 250 / 115 Nm︱C-Axis 360 °︱spindle taper DIN 55026 / A2-6 ︱spindle bore 75 mm︱max. usable bar diameter 65 mm︱chucking diameter 215 mm︱turret: ︱number of toolpositions 12 pos.︱Number of driven toolspositions 12 pos.︱tool taper VDI 30 ︱Shank diameter 25 x 25 mm︱
          CNC-Turning- and MillingCenter OPTIMUM - OPTIturn S 600 CNC - NEW MACHINE / SHOW-ROOM-MACHINE - C-Axis - Tool-Drive - alternative configuration available, optional and on request !
            turning diameter max. 500 mm
            turning length 460 mm
            control Sinumerik 828D Siemens
            greates pass round over bed 500 mm
            Swing dia. over traverse guidewa. 220 mm
            standard turning dia. 215 mm
            turning speed range - main spind. 10 - 4.000 min/-1
            power capacity - main spindel 30 / 12 kW
            max. Torque 250 / 115 Nm
            C-Axis 360 °
            spindle taper DIN 55026 / A2-6
            spindle bore 75 mm
            max. usable bar diameter 65 mm
            chucking diameter 215 mm
            number of toolpositions 12 pos.
            Number of driven toolspositions 12 pos.
            tool taper VDI 30
            Shank diameter 25 x 25 mm
            Description :
            CNC-Turning- and MillingCenter
            OPTIMUM - OPTIturn S 600 CNC

            - NEW MACHINE / SHOW-ROOM-MACHINE
            - C-Axis
            - Tool-Drive

            - alternative configuration available, optional and on request !
          Datasheet
          Request / Contact
          used Lathes CNC Turning- and Milling Center DMG MORI NLX 2500 / 500


          • Kemmerich Werkzeugmaschinen GmbH
          • Im Rottfeld 1a
          • 40789 Monheim am Rhein
          • Deutschland

          • +49 2173 207474
            +49 2173 207473
          • info@kemmerich.biz
            www.kemmerich.biz
          #1020-18501 · CNC Turning- and Milling Center

          DMG MORI - NLX 2500 / 500 - - 2018 - M 730 UM CELOS

          Technical details
          turning diameter 268/460 mm︱turning length 450 mm︱control M 730 UM CELOS︱greates pass round over bed 590 mm︱Swing dia. over traverse guideway 360 mm︱standard turning dia. 268 mm︱distance between spindles 500 mm︱Main spindle: ︱turning speed range - main spindle 4000 min/-1︱power capacity - main spindel 18,5 kW︱spindle nose JISA2-B ︱spindle bearing diameter 140 mm︱spindle bore 91 mm︱max. bar capacity 80 mm︱C-Axis 0,001 °︱chucking diameter 254 mm︱axis stroke: ︱x-travel 260 mm︱z-travel 500 mm︱feeds:
          Equipped with: - Tailstock - Coolant - Ol Mist Exhauster 3 machines available
            turning diameter 268/460 mm
            turning length 450 mm
            control M 730 UM CELOS
            greates pass round over bed 590 mm
            Swing dia. over traverse guidewa. 360 mm
            standard turning dia. 268 mm
            distance between spindles 500 mm
            turning speed range - main spind. 4000 min/-1
            power capacity - main spindel 18,5 kW
            spindle nose JISA2-B
            spindle bearing diameter 140 mm
            spindle bore 91 mm
            max. bar capacity 80 mm
            C-Axis 0,001 °
            chucking diameter 254 mm
            x-travel 260 mm
            z-travel 500 mm
            Description :
            Equipped with:
            - Tailstock
            - Coolant
            - Ol Mist Exhauster
            3 machines available
          Datasheet
          Request / Contact
          used Lathes CNC Turning- and Milling Center DMG MORI NLX 2000 SY / 500


          • Stiens Werkzeugmaschinen GmbH
          • Mittelweg 92
          • 59302 Oelde
          • Deutschland

          • +49 252283490
            (0049) - 2522 - 8349-20
          • info@stiens.de
            www.stiens.de
          #1039-8488 · CNC Turning- and Milling Center

          DMG MORI - NLX 2000 SY / 500 - - 2018 - M 730 UM CELOS

          Technical details
          turning diameter max. 366 mm︱turning length 510 mm︱control M 730 UM CELOS︱greates pass round over bed 923,8 mm︱Swing dia. over traverse guideway 755 mm︱standard turning dia. 275 mm︱distance between spindles 500 mm︱Main spindle: ︱turning speed range - main spindle 5.000 min/-1︱power capacity - main spindel 15 / 11 kW︱spindle nose JIS A-6 ︱spindle bearing diameter 120 mm︱spindle bore 73 mm︱max. bar capacity 65 mm︱usable bar diameter ( - ) mm︱C-Axis 0,001 °︱chucking diameter 200 mm︱Subspindel: ︱Spindle speed range subspindle 6.000 min/-1︱power capacity - Sub spindle 11 / 7,5 kW︱
          CNC - Turning- and MillingCenter DMG MORI - NLX 2000 SY / 500 - Subspindle - C-Axis - Y-Axis - Tool-Drive - Only 600h Operating-Hours
            turning diameter max. 366 mm
            turning length 510 mm
            control M 730 UM CELOS
            greates pass round over bed 923,8 mm
            Swing dia. over traverse guidewa. 755 mm
            standard turning dia. 275 mm
            distance between spindles 500 mm
            turning speed range - main spind. 5.000 min/-1
            power capacity - main spindel 15 / 11 kW
            spindle nose JIS A-6
            spindle bearing diameter 120 mm
            spindle bore 73 mm
            max. bar capacity 65 mm
            usable bar diameter ( - ) mm
            C-Axis 0,001 °
            chucking diameter 200 mm
            Spindle speed range subspindle 6.000 min/-1
            power capacity - Sub spindle 11 / 7,5 kW
            Description :
            CNC - Turning- and MillingCenter
            DMG MORI - NLX 2000 SY / 500

            - Subspindle
            - C-Axis
            - Y-Axis
            - Tool-Drive

            - Only 600h Operating-Hours


          Datasheet
          Request / Contact
          used Lathes CNC Turning- and Milling Center EMAG VL4 MY


          • Marcels Maschinen AG
          • Anthoptstrasse 11
          • 8222 Beringen (Schaffhausen)
          • Schweiz

          • (0041) 44 872 3400
            (0041) 44 872 3403
          • info@marcels-maschinen.ch
            http://www.marcels-maschinen.ch
          #1065-J573 · CNC Turning- and Milling Center

          EMAG - VL4 MY - - 2018 - FANUC 31i / 31iB

          Technical details
          turning diameter 200 mm︱turning length 200 mm︱control FANUC 31i / 31iB ︱swing diameter 280 mm︱turret head 12 pos ︱weight of the machine ca. 10 t︱
          As new with approx 400 working hours Turret head with 12 driven stations Y-Axis Workpiece charging and discharging station Coolant through spindle Tool measuring device Misc accessories Mehr Informationen auf www.marcels-maschinen.ch
            turning diameter 200 mm
            turning length 200 mm
            control FANUC 31i / 31iB
            swing diameter 280 mm
            turret head 12 pos
            weight of the machine ca. 10 t
            Description :
            As new with approx 400 working hours

            Turret head with 12 driven stations
            Y-Axis
            Workpiece charging and discharging station
            Coolant through spindle
            Tool measuring device
            Misc accessories

            Mehr Informationen auf www.marcels-maschinen.ch
          Datasheet
          Request / Contact
          used Lathes CNC Turning- and Milling Center CMZ TL 25 Y


          • FIMOTEC
          • 20 RUE AMPERE
          • 67500 HAGUENAU
          • Frankreich

          • +33 (0)388720247
            +33 (0)388936066
          • FIMOTEC@WANADOO.FR
            WWW.FIMOTEC.FR
          #1105-03155 · CNC Turning- and Milling Center

          CMZ - TL 25 Y - - 2017 - FANUC 32 I

          Technical details
          turning diameter 510 mm︱turning length 676 mm︱control FANUC 32 I ︱turning speeds 670 U/min︱rapid traverse 24 m/min︱workpiece weight 600 kg︱thread pitch max. 400 mm︱total power requirement 30 kW︱weight of the machine ca. 5.8 t︱dimensions of the machine ca. m︱
          4 AXIS CNC LATHE WHIT Y AXIS LIVE TOOLS 1 disc turret with 12 position, , cylinder shaft, 1 tailstock, , hydr. clamping CONTROL FANUC 32 I A TAISLTOCK TOOLS BAR LOADER IEMCA KID 80
            turning diameter 510 mm
            turning length 676 mm
            control FANUC 32 I
            turning speeds 670 U/min
            rapid traverse 24 m/min
            workpiece weight 600 kg
            thread pitch max. 400 mm
            total power requirement 30 kW
            weight of the machine ca. 5.8 t
            Description :
            4 AXIS CNC LATHE WHIT Y AXIS LIVE TOOLS

            1 disc turret with 12 position, , cylinder shaft, 1 tailstock, , hydr. clamping
            CONTROL FANUC 32 I A
            TAISLTOCK
            TOOLS
            BAR LOADER IEMCA KID 80
          Datasheet
          Request / Contact
          used Lathes CNC Turning- and Milling Center DMG  MORI GILDEMEISTER CTX  ECOTURN 510


          • FIMOTEC
          • 20 RUE AMPERE
          • 67500 HAGUENAU
          • Frankreich

          • +33 (0)388720247
            +33 (0)388936066
          • FIMOTEC@WANADOO.FR
            WWW.FIMOTEC.FR
          #1105-02726 · CNC Turning- and Milling Center

          DMG MORI GILDEMEISTER - CTX ECOTURN 510 - - 2016 - SIEMENS 840 SL SHOP TURN

          Technical details
          turning diameter 680 mm︱turning length 1050 mm︱control SIEMENS 840 SL SHOP TURN ︱turning dia. over face-slide 455 mm︱cross movement 300 mm︱turning speeds 3250 1/min︱spindle hollow 102 mm︱spindle 33/22 kW︱turret head 12 pos.︱turret head drive 4.2 kW︱rapid travel x/y/z 30 / 10/ 30 m/min︱rotational speed range of tools 4000 1/min︱speed range C-axis 100 1/min︱spindle bore 102 mm︱tailstock quill taper MT 5 ︱tailstock movement 6 m/min︱total power requirement 50 kVA︱weight of the machine ca. 8 t︱
          CTX ECOTURN 510 NEW DESIGN WITH MOWING TOOLS C AXIS + Y AXIS 1000 WORKING HOURS CNC CONTROL SIEMENS 840 SL SHOP TURN
            turning diameter 680 mm
            turning length 1050 mm
            control SIEMENS 840 SL SHOP TURN
            turning dia. over face-slide 455 mm
            cross movement 300 mm
            turning speeds 3250 1/min
            spindle hollow 102 mm
            spindle 33/22 kW
            turret head 12 pos.
            turret head drive 4.2 kW
            rapid travel x/y/z 30 / 10/ 30 m/min
            rotational speed range of tools 4000 1/min
            speed range C-axis 100 1/min
            spindle bore 102 mm
            tailstock quill taper MT 5
            tailstock movement 6 m/min
            total power requirement 50 kVA
            weight of the machine ca. 8 t
            Description :
            CTX ECOTURN 510 NEW DESIGN
            WITH MOWING TOOLS C AXIS + Y AXIS
            1000 WORKING HOURS
            CNC CONTROL SIEMENS 840 SL SHOP TURN

          Datasheet
          Request / Contact
          used Lathes CNC Turning- and Milling Center GEORG Ultraturn 4000 MC


          • SK Maschinen-Service GmbH
          • Tackweg 4
          • 47918 Tönisvorst
          • Deutschland

          • 02151 79350
            02151 793535
          • info@sk-maschinen.de
            www.sk-maschinen.de
          #1038-80413 · CNC Turning- and Milling Center

          GEORG - Ultraturn 4000 MC - - 2016 -

          Technical details
          turning diameter over bed 4000 mm︱turning diameter over slide rest 3500 mm︱turning length 10950 mm︱turning speed range: 1-300 U/min︱power capacity 171 kW︱workpiece weight with 2 steadies 180000 kg︱max. workpiece weight between centres 75000 kg︱Total weight, approx. 350.000 kg︱dimensions of the machine ca. 28,6 x 10,8 x 4,1 m︱workpiece weight with one steady 140000 kg︱max. workpiece weight -without tailstock 10000 kg︱faceplate diameter 2200 mm︱turning speed range - C-axis 0-5 U/min︱max. torque on the working spindle ca. 7200 Nm︱tailstock - quill dia 530 mm︱quill adjustment - autom. and manual 100 mm︱tailstock adjustment 11134 mm︱tailstock travel rapid travel 0-4000 mm/min︱z-axis 15000 mm︱x-axis 1600 mm︱
          Turning- milling- grinding center for complete machining of turbine rotors, rolls and shafts. machine is in excellent condition with following configuration: - SIEMENS Sinumerik 840 D SL Operate - sviwel axi in ram (A-Axis) - turning attachment C6 - width 84 mm - turning attachment C8 - width 100 mm - milling extension - 81 kW - angle milling head, Standard - 81 kW - angle milling head, narrow - 10 kW - universal milling head - 30 kW - milling head for milling discs (Slotter) - 81 kW - grinding attachment for external grinding - 30 kW - 3 steady bases - 2 hydrodynamic steady tops - 2 workpiece clamings for hydrodynamic steady tops - 10 exchangable bearing shells for steady tops - 1 roller steady in C-execution - 1 hydraulic workpiece release - cooling system - dust exhaust system - plastic chips exhaust - video-control - Pick-up station for 8 heads - storage place for 3 milling discs - pillar sviweling crane - 250 kg - automatic tool changing system - 102 Plätze - tool cleaning system - tool breakage monitoring - workpiece measuring system Renishaw - 2-point measuring system - complete housing - Georg Maintenance System (GMS) Basis plus vibration monitoring
            turning diameter over bed 4000 mm
            turning diameter over slide rest 3500 mm
            turning length 10950 mm
            turning speed range: 1-300 U/min
            power capacity 171 kW
            workpiece weight with 2 steadies 180000 kg
            max. workpiece weight between ce. 75000 kg
            Total weight, approx. 350.000 kg
            dimensions of the machine ca. 28,6 x 10,8 x 4,1 m
            workpiece weight with one steady 140000 kg
            max. workpiece weight -without t. 10000 kg
            faceplate diameter 2200 mm
            turning speed range - C-axis 0-5 U/min
            max. torque on the working spind. ca. 7200 Nm
            tailstock - quill dia 530 mm
            quill adjustment - autom. and ma. 100 mm
            tailstock adjustment 11134 mm
            tailstock travel r. 0-4000 mm/min
            z-axis 15000 mm
            x-axis 1600 mm
            Description :
            Turning- milling- grinding center for complete machining of turbine rotors,
            rolls and shafts.
            machine is in excellent condition with following configuration:
            - SIEMENS Sinumerik 840 D SL Operate
            - sviwel axi in ram (A-Axis)
            - turning attachment C6 - width 84 mm
            - turning attachment C8 - width 100 mm
            - milling extension - 81 kW
            - angle milling head, Standard - 81 kW
            - angle milling head, narrow - 10 kW
            - universal milling head - 30 kW
            - milling head for milling discs (Slotter) - 81 kW
            - grinding attachment for external grinding - 30 kW
            - 3 steady bases
            - 2 hydrodynamic steady tops
            - 2 workpiece clamings for hydrodynamic steady tops
            - 10 exchangable bearing shells for steady tops
            - 1 roller steady in C-execution
            - 1 hydraulic workpiece release
            - cooling system
            - dust exhaust system
            - plastic chips exhaust
            - video-control
            - Pick-up station for 8 heads
            - storage place for 3 milling discs
            - pillar sviweling crane - 250 kg
            - automatic tool changing system - 102 Plätze
            - tool cleaning system
            - tool breakage monitoring
            - workpiece measuring system Renishaw
            - 2-point measuring system
            - complete housing
            - Georg Maintenance System (GMS) Basis plus vibration monitoring

          Datasheet
          Request / Contact
          used Lathes CNC Turning- and Milling Center MAIER MLK 36D


          • ProdEq Trading
          • Reckholder 1
          • 9527 Niederhelfenschwil
          • Schweiz

          • (0041)71 - 948 7060
            (0041)71 - 948 7069
          • info@prodeq.ch
            www.prodeq.ch
          #1045-39768 · CNC Turning- and Milling Center

          MAIER - MLK 36D - - 2016 - SIEMENS 840 D

          Technical details
          turning diameter 36 mm︱turning length mm︱control ︱-------------------------------------------------- ︱BASIC FUNCTIONS ︱- number of spindles 3 ︱WORKING RANGE TURNING ︱- turning diameter (max) 36 mm︱MAIN SPINDLE ︱- spindle revolutions (max) 6000 /min︱- spindle positioning 5 °︱- c-axis: yes ︱COUNTER SPINDLE ︱- spindle revolutions (max) 6000 /min︱- spindle positioning 5 °︱- c-axis: yes ︱ELECTRICAL SPECIFICATIONS ︱- total power consumption 25.7 kW︱- mains voltage 400 V︱- mains frequency 50 Hz︱
            turning diameter 36 mm
            turning length mm
            - number of spindles 3
            - turning diameter (max) 36 mm
            - spindle revolutions (max) 6000 /min
            - spindle positioning 5 °
            - c-axis: yes
            - spindle revolutions (max) 6000 /min
            - spindle positioning 5 °
            - c-axis: yes
            - total power consumption 25.7 kW
            - mains voltage 400 V
            - mains frequency 50 Hz
          Datasheet
          Request / Contact
          used Lathes CNC Turning- and Milling Center OKUMA Multus B750 x 3000


          • Kemmerich Werkzeugmaschinen GmbH
          • Im Rottfeld 1a
          • 40789 Monheim am Rhein
          • Deutschland

          • +49 2173 207474
            +49 2173 207473
          • info@kemmerich.biz
            www.kemmerich.biz
          #1020-18514 · CNC Turning- and Milling Center

          OKUMA - Multus B750 x 3000 - - 2016 - OSP 300 S

          Technical details
          turning diameter 1050 mm︱turning length 3000 mm︱control OSP 300 S ︱distance 3544 mm︱travel -x axis 1080 mm︱travel -z axis 3215 mm︱travel -y axis -330 / +330 mm︱b-axis -30/ +210 --- 0,001 °︱spindle turning speed range 11-2000 U/min︱Spindle drive motor main spindle 37 / 30 kW︱spindle hollow 142/220 mm︱power capacity - milling spindle 37 / 30 kW︱milling head speed 40 - 10000 U/min︱Torque 505/300 Nm︱rapid travel x/y/z 40 / 40 / 40 mm/min︱C-axis turning speed 100 U/min︱max. tool length 600 mm︱max. tool diameter 135 mm︱max. tool weight 30 kg︱workpiece weight 5 t︱
          Equipment: - CNC control Okuma OSP P 300 S with Okuma Anti-Collision System CAS and One-Touch-Advance IGF (dialog programming) - Main- & counter spindle - 40-fold tool changer HSK-A100 / Capto C 8 - B axis 0.001° -30/+210° - C-axis 0.001 mm 360 - Y-axis +/- 330 mm - milling spindle 40 - 10,000 rpm, 37/22/15 kW - Automatic door - Touch Setter - Coolant through the spindle, prepared for 70 bar, without pump - Chip conveyor - Y-axis rotation function
            turning diameter 1050 mm
            turning length 3000 mm
            control OSP 300 S
            distance 3544 mm
            travel -x axis 1080 mm
            travel -z axis 3215 mm
            travel -y axis -330 / +330 mm
            b-axis -30/ +210 --- 0,001 °
            spindle turning speed range 11-2000 U/min
            Spindle drive motor main spindle 37 / 30 kW
            spindle hollow 142/220 mm
            power capacity - milling spindle 37 / 30 kW
            milling head speed 40 - 10000 U/min
            Torque 505/300 Nm
            rapid travel x/y/z 40 / 40 / 40 mm/min
            C-axis turning speed 100 U/min
            max. tool length 600 mm
            max. tool diameter 135 mm
            max. tool weight 30 kg
            workpiece weight 5 t
            Description :
            Equipment:
            - CNC control Okuma OSP P 300 S with Okuma Anti-Collision System CAS
            and One-Touch-Advance IGF (dialog programming)
            - Main- & counter spindle
            - 40-fold tool changer HSK-A100 / Capto C 8
            - B axis 0.001° -30/+210°
            - C-axis 0.001 mm 360
            - Y-axis +/- 330 mm
            - milling spindle 40 - 10,000 rpm, 37/22/15 kW
            - Automatic door
            - Touch Setter
            - Coolant through the spindle, prepared for 70 bar, without pump
            - Chip conveyor
            - Y-axis rotation function


          Datasheet
          Request / Contact
          used Lathes CNC Turning- and Milling Center DOOSAN Puma 2600LSY


          • Hop Machines
          • Wethouder Lindersstraat 145
          • 5455 GK Wilbertoord
          • Niederlande

          • +31 (0)485478107
          • info@hopmachines.nl
            www.hopmachines.nl
          #2018-5394 · CNC Turning- and Milling Center

          DOOSAN - Puma 2600LSY - - 2016 - Siemens 828

          Technical details
          turning diameter 376 mm︱turning length 1280 mm︱control Siemens 828 ︱y-axis 105 mm︱weight of the machine ca. 7,75 t︱
            turning diameter 376 mm
            turning length 1280 mm
            control Siemens 828
            y-axis 105 mm
            weight of the machine ca. 7,75 t
          Datasheet
          Request / Contact
          used Lathes CNC Turning- and Milling Center OKUMA Multus U4000 1SW 1500


          • Stiens Werkzeugmaschinen GmbH
          • Mittelweg 92
          • 59302 Oelde
          • Deutschland

          • +49 252283490
            (0049) - 2522 - 8349-20
          • info@stiens.de
            www.stiens.de
          #1039-8682 · CNC Turning- and Milling Center

          OKUMA - Multus U4000 1SW 1500 - - 2016 - OSP-P300S-H Suite

          Technical details
          turning diameter max. 650 mm︱turning length max. 1.500 mm︱control OSP-P300S-H Suite ︱Main spindle: ︱Max. rpm 3.000 min/-1︱power capacity - main spindel 32 / 22 kW︱spindle bore 112 mm︱max. usable bar diameter 91 mm︱spindle nose A2-11 ︱chucking diameter 300 mm︱Subspindle: ︱Max. rpm 38 - 3.800 min/-1︱power capacity - Sub spindle 22 / 15 kW︱spindle bore 80 mm︱max. usable bar diameter - mm︱spindle nose A2-8 ︱chucking diameter 300 mm︱Traverses Subspindle W: 1.594 mm︱Milling Spindle: ︱Max. rpm 12.000 min/-1︱
          CNC-HighQuality-Turning- and MillingCenter OKUMA - Multus U4000 1SW 1500 - Main-, Sub- and Swivel-Millingspindle - 5 Axis-Simultaneous-Machining
            turning diameter max. 650 mm
            turning length max. 1.500 mm
            control OSP-P300S-H Suite
            Max. rpm 3.000 min/-1
            power capacity - main spindel 32 / 22 kW
            spindle bore 112 mm
            max. usable bar diameter 91 mm
            spindle nose A2-11
            chucking diameter 300 mm
            Max. rpm 38 - 3.800 min/-1
            power capacity - Sub spindle 22 / 15 kW
            spindle bore 80 mm
            max. usable bar diameter - mm
            spindle nose A2-8
            chucking diameter 300 mm
            Traverses Subspindle W: 1.594 mm
            Max. rpm 12.000 min/-1
            Description :
            CNC-HighQuality-Turning- and MillingCenter
            OKUMA - Multus U4000 1SW 1500

            - Main-, Sub- and Swivel-Millingspindle
            - 5 Axis-Simultaneous-Machining
          Datasheet
          Request / Contact
          used Lathes CNC Turning- and Milling Center TAKISAWA TMM-250M1


          • Knops Werkzeugmaschinen
          • Ronsdorfer Str. 143
          • 40233 Düsseldorf
          • Deutschland

          • 0211 8793140
            0211 8793134
          • maschinen@knops.de
            www.knops.de
          #1022-E05603 · CNC Turning- and Milling Center

          TAKISAWA - TMM-250M1 - - 2016 - Fanuc Series 31i-Model B

          Technical details
          turning diameter 350 mm︱turning length 800/200 mm︱control Fanuc Series 31i-Model B ︱total power requirement 8,5 kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱
          First machine installation January 2017 Please note the hours of operation on picture 2! Special feature of the machine: This machine has 2 spindles and 2 revolvers. She is able to work with both revolvers at one Spindle (4 axes) to work. With collet chuck + collets 2 x 3 jaw chucks diameter 200 mm for main and counter spindle Various standard and driven holders The machine is sold without bar loader. Basic equipment of the machine • 32 bit FANUC CNC control with Manual Guide i (Tiwap) and Internet interface • 10.4 inch LCD color screen • AC-digital FANUC spindle and axis motors • Both spindles with C-axis (built-in motors with oil cooler) • both spindles with disc brake, • Drive power left spindle 15/22 KW, • Torque max. 433 Nm, • speed max. 4,000 min / -1, • Spindle nose A2-8 with protective flange on cylindrical 220 mm, Li. Spindle bore 86 mm, • Bar passage 76 mm, • Clamping cylinder type SMW VNK 170/77, • drive power right spindle 11 / 18,5 KW, • Torque max. 326 Nm, • speed max. 4,000 min / -1, • Spindle nose A2- 6 with protection flange on cylindrical 170 mm, • Right spindle bore 63 mm1 • Bar passage 51 mm, • Clamping cylinder type SMW VNK 130/52, • 2 VDI 40 turrets with 15 tool places each (Double holders are possible, therefore up to 60 tool slots in the machine) • Max. 15 driven tool holders per revolver, • Y-axis 100 mm (+/- 50 mm) guided flat in the upper turret, • M-function for opening / closing the chucks, • Drive power of the driven tools 3.7 / 5.5 KW, • Speed ??of the driven tools max. 4,000 min / -1, • Torque max. 35 Nm, • Tapping without length compensation (Rigid Tapping) • distance between the spindle noses 1130 mm, Max. Turning length 760/200 mm, • Chuck blowout of the right spindle via M command • Footswitch for both chucks • coolant device 4 bar, • Radiator to regulate the coolant Standard accessories: • Automatic central lubrication, • cast construction (Meehanite cast), • X and Y axes as hardened sliding guides, opposite side Turcite coated • Z and A axes with roller guide, • machine panel with workspace lighting, • 1 set of machine documentation, • Integrated alignment screws and shims • CE compliant Optional accessories: Main spindle Hainbuch chuck 65mm is on the machine at the moment Counter spindle Hainbuch collet 65mm is currently on the machine 3 - colored signal lamp (continuous light) for displaying the respective operating state of the machine. 2 x high pressure coolant pump 9 bar (unit price € 1,870.00) Workpiece removal device for drop pieces below the right spindle. The workpiece removal is installed in the lower turret on a station. A conveyor belt transports the parts to the right. It can workpieces up to max. 3.0 kg and a length of 280 mm and a Diameter of 70 mm can be removed. Tool monitoring system (Raku Raku) with Sister tool call by monitoring the drive motors or pre-set tool life revolver. Hinge strap - Chip conveyor to the right. The pitch angle is about 60 degrees, the ejection height 850 mm above the corridor. Bar loader interface with Blok-Skip function Contour Input of the machining contour with angle and radius indication possible. Helical interpolation for driven tools (allows thread milling) Digital display for clamping path monitoring. Digital display, which is located on the front control panel and for easy adjustment of the clamping range is used. There are 13 off standard toolholders and 9 off boring toolholders Thre are 2 off radial driven toolholders
            turning diameter 350 mm
            turning length 800/200 mm
            control Fanuc Series 31i-Model B
            total power requirement 8,5 kW
            Description :
            First machine installation January 2017
            Please note the hours of operation on picture 2!

            Special feature of the machine:
            This machine has 2 spindles and 2 revolvers.
            She is able to work with both revolvers at one
            Spindle (4 axes) to work.

            With collet chuck + collets
            2 x 3 jaw chucks diameter 200 mm for main and counter spindle
            Various standard and driven holders

            The machine is sold without bar loader.

            Basic equipment of the machine

            • 32 bit FANUC CNC control with Manual Guide i (Tiwap) and
            Internet interface
            • 10.4 inch LCD color screen
            • AC-digital FANUC spindle and axis motors

            • Both spindles with C-axis (built-in motors with oil cooler)
            • both spindles with disc brake,
            • Drive power left spindle 15/22 KW,
            • Torque max. 433 Nm,
            • speed max. 4,000 min / -1,
            • Spindle nose A2-8 with protective flange on cylindrical 220 mm,
            Li. Spindle bore 86 mm,
            • Bar passage 76 mm,
            • Clamping cylinder type SMW VNK 170/77,
            • drive power right spindle 11 / 18,5 KW,
            • Torque max. 326 Nm,
            • speed max. 4,000 min / -1,
            • Spindle nose A2- 6 with protection flange on
            cylindrical 170 mm,
            • Right spindle bore 63 mm1
            • Bar passage 51 mm,
            • Clamping cylinder type SMW VNK 130/52,


            • 2 VDI 40 turrets with 15 tool places each
            (Double holders are possible, therefore up to 60 tool slots in the machine)
            • Max. 15 driven tool holders per revolver,
            • Y-axis 100 mm (+/- 50 mm) guided flat in the upper turret,

            • M-function for opening / closing the chucks,
            • Drive power of the driven tools 3.7 / 5.5 KW,
            • Speed ??of the driven tools max. 4,000 min / -1,
            • Torque max. 35 Nm,
            • Tapping without length compensation
            (Rigid Tapping)
            • distance between the spindle noses 1130 mm,
            Max. Turning length 760/200 mm,

            • Chuck blowout of the right spindle via M command
            • Footswitch for both chucks
            • coolant device 4 bar,
            • Radiator to regulate the coolant

            Standard accessories:

            • Automatic central lubrication,
            • cast construction (Meehanite cast),
            • X and Y axes as hardened sliding guides, opposite side Turcite
            coated
            • Z and A axes with roller guide,
            • machine panel with workspace lighting,
            • 1 set of machine documentation,
            • Integrated alignment screws and shims
            • CE compliant

            Optional accessories:

            Main spindle Hainbuch chuck 65mm is on the machine at the moment
            Counter spindle Hainbuch collet 65mm is currently on the machine

            3 - colored signal lamp (continuous light)
            for displaying the respective operating state of the machine.
            2 x high pressure coolant pump 9 bar (unit price € 1,870.00)
            Workpiece removal device for drop pieces below the
            right spindle.
            The workpiece removal is installed in the lower turret on a station.
            A conveyor belt transports the parts to the right.
            It can workpieces up to max. 3.0 kg and a length of 280 mm and a
            Diameter of 70 mm can be removed.
            Tool monitoring system (Raku Raku) with
            Sister tool call by monitoring the drive motors or
            pre-set tool life revolver.
            Hinge strap - Chip conveyor to the right.
            The pitch angle is about 60 degrees,
            the ejection height 850 mm above the corridor.
            Bar loader interface with Blok-Skip function
            Contour
            Input of the machining contour with angle and radius indication possible.
            Helical interpolation for driven tools (allows thread milling)
            Digital display for clamping path monitoring.
            Digital display, which is located on the front control panel
            and for easy adjustment of the clamping range is used.

            There are 13 off standard toolholders and 9 off boring toolholders

            Thre are 2 off radial driven toolholders

          Datasheet
          Request / Contact
          used Lathes CNC Turning- and Milling Center DMG-MORI EcoTurn 450 V3


          • Kemmerich Werkzeugmaschinen GmbH
          • Im Rottfeld 1a
          • 40789 Monheim am Rhein
          • Deutschland

          • +49 2173 207474
            +49 2173 207473
          • info@kemmerich.biz
            www.kemmerich.biz
          #1020-18177 · CNC Turning- and Milling Center

          DMG-MORI - EcoTurn 450 V3 - - 2016 - Siemens 840 D SL SHOPTURN

          Technical details
          turning diameter 400 mm︱turning length 600 mm︱control Siemens 840 D SL SHOPTURN ︱turning dia. over face-slide 480 mm︱turning speeds 4000 1/min︱spindle 17,5 / 12,5 kW︱turret head 12 pos.︱turret head drive 4,2 kW︱rotational speed range of tools 4000 1/min︱tailstock quill taper MT 5 ︱quill stroke 500 mm︱rapid travel x/y/z 30 m/min︱bar capacity 65 mm︱workpiece weight max. 800 kg︱total power requirement 27 kVA︱weight of the machine ca. 5,8 t︱
          equipped with: - Siemens 840D SL - 12 driven tools (VDI 40) - Chip conveyor - Tailstock - 3 jaw chuck dia 250mm - Coolant pump 12bar
            turning diameter 400 mm
            turning length 600 mm
            control Siemens 840 D SL SHOPTURN
            turning dia. over face-slide 480 mm
            turning speeds 4000 1/min
            spindle 17,5 / 12,5 kW
            turret head 12 pos.
            turret head drive 4,2 kW
            rotational speed range of tools 4000 1/min
            tailstock quill taper MT 5
            quill stroke 500 mm
            rapid travel x/y/z 30 m/min
            bar capacity 65 mm
            workpiece weight max. 800 kg
            total power requirement 27 kVA
            weight of the machine ca. 5,8 t
            Description :
            equipped with:
            - Siemens 840D SL
            - 12 driven tools (VDI 40)
            - Chip conveyor
            - Tailstock
            - 3 jaw chuck dia 250mm
            - Coolant pump 12bar


          Datasheet
          Request / Contact
          used Lathes CNC Turning- and Milling Center DMG MORI ecoTurn 450 V3


          • Stiens Werkzeugmaschinen GmbH
          • Mittelweg 92
          • 59302 Oelde
          • Deutschland

          • +49 252283490
            (0049) - 2522 - 8349-20
          • info@stiens.de
            www.stiens.de
          #1039-8688 · CNC Turning- and Milling Center

          DMG MORI - ecoTurn 450 V3 - - 2016 - CNC-Pilot 640 Heidenhain

          Technical details
          turning diameter max. 650 mm︱turning length max. 595 mm︱control CNC-Pilot 640 Heidenhain︱greates pass round over bed 650 mm︱Swing dia. over traverse guideway 465 mm︱standard turning dia. 400 mm︱Main spindle: ︱Max. rpm 4.000 min/-1︱power capacity - main spindel 12,5 / 17,5 kW︱max. Torque 370 Nm︱usable bar diameter 65 mm︱chucking diameter 250 mm︱spindle taper 170h5 ︱C-Axis 0,04 °︱axis stroke: ︱x-axis 267,5 mm︱z-axis 600 mm︱c-axis 360 °︱turret: ︱number of toolpositions 12 pos.︱
          CNC-Turning- and MillingCenter DMG MORI - ecoTurn 450 V3 - Tool-Drive - C-Axis - Operating-Hours: ca. 4.750h / 1.200h
            turning diameter max. 650 mm
            turning length max. 595 mm
            control CNC-Pilot 640 Heidenhain
            greates pass round over bed 650 mm
            Swing dia. over traverse guidewa. 465 mm
            standard turning dia. 400 mm
            Max. rpm 4.000 min/-1
            power capacity - main spindel 12,5 / 17,5 kW
            max. Torque 370 Nm
            usable bar diameter 65 mm
            chucking diameter 250 mm
            spindle taper 170h5
            C-Axis 0,04 °
            x-axis 267,5 mm
            z-axis 600 mm
            c-axis 360 °
            number of toolpositions 12 pos.
            Description :
            CNC-Turning- and MillingCenter
            DMG MORI - ecoTurn 450 V3

            - Tool-Drive
            - C-Axis
            - Operating-Hours: ca. 4.750h / 1.200h

          Datasheet
          Request / Contact
          used Lathes CNC Turning- and Milling Center DMG-MORI SEIKI NT 4250 / 1500 S


          • Kemmerich Werkzeugmaschinen GmbH
          • Im Rottfeld 1a
          • 40789 Monheim am Rhein
          • Deutschland

          • +49 2173 207474
            +49 2173 207473
          • info@kemmerich.biz
            www.kemmerich.biz
          #1020-17609 · CNC Turning- and Milling Center

          DMG-MORI SEIKI - NT 4250 / 1500 S - - 2015 - F31i A5

          Technical details
          turning diameter 660 / 350 mm︱turning length 1542 mm︱control F31i A5 ︱swing diameter max. 730 mm︱Main spindle: ︱Max. rpm 4000 min/-1︱transmission ratio 2 ︱power capacity - main spindel 26 / 22 kW︱Bar feed 80 mm︱usable bar diameter 80 mm︱spindle nose JIS A2-8 ︱C-Axis 0,001 °︱chucking diameter 300 mm︱Subspindel: ︱Max. rpm 4000 min/-1︱transmission ratio 2 ︱power capacity - Sub spindle 26 / 22 kW︱Bar feed max. 80 mm︱usable bar diameter 80 mm︱spindle nose JIS A2-8
          equipped with: - CNC Control F31i A5 - (Spindle 1) KITAGAWA 12" Hollow Chuck - (Spindle 2) KITAGAWA 12" Hollow Chuck - Tool spindle full indexing specifications - Spindle 2 tailstock specifications - Tool storage capacity 40 tools(Capto C6) - Coolant gun - Super-high pressure coolant system(7.0MPa) - Coolant cooling system (separate type) - Mist collector I/F(duct only, dia.200mm) - Chip conveyor (right discharge, hinge type)(/1500) - In-machine workpiece tool presetter for tool spindle(in-out type) - Direct scal feedback for X-axis(tool spindle) - Direct scal feedback for Y-axis(tool spindle) - Direct scal feedback for Z-axis(tool spindle)(/1500) - Chuck foot switch(double) for Main and Counter spindle - Signal lower 3 layers(Red, yellow, green) LED type - Total counter - Manual pulse generator(separate type) - Cooling unit for electrical cabinet - Programming resolution mutipiled by 1/10 - Memory card for Data server(CF card 1 GB) - Playback - Spindle 1 hobbing function - Automatic corner override - Coordinate system rotation - Addition of optional block skip (soft key type 2-9) - Direct drawing dimension programming - Interruption type custom macro - Tool offsets 480 sets in total - KCs mark 65kVA E30373 EMC(including cable) - Invo-Milling package Capto C6 CE-Sign and only 5h (!!) Working Hours
            turning diameter 660 / 350 mm
            turning length 1542 mm
            control F31i A5
            swing diameter max. 730 mm
            Max. rpm 4000 min/-1
            transmission ratio 2
            power capacity - main spindel 26 / 22 kW
            Bar feed 80 mm
            usable bar diameter 80 mm
            spindle nose JIS A2-8
            C-Axis 0,001 °
            chucking diameter 300 mm
            Max. rpm 4000 min/-1
            transmission ratio 2
            power capacity - Sub spindle 26 / 22 kW
            Bar feed max. 80 mm
            usable bar diameter 80 mm
            spindle nose JIS A2-8
            Description :
            equipped with:
            - CNC Control F31i A5

            - (Spindle 1) KITAGAWA 12" Hollow Chuck
            - (Spindle 2) KITAGAWA 12" Hollow Chuck
            - Tool spindle full indexing specifications
            - Spindle 2 tailstock specifications
            - Tool storage capacity 40 tools(Capto C6)
            - Coolant gun
            - Super-high pressure coolant system(7.0MPa)
            - Coolant cooling system (separate type)
            - Mist collector I/F(duct only, dia.200mm)
            - Chip conveyor (right discharge, hinge type)(/1500)
            - In-machine workpiece tool presetter for tool spindle(in-out type)
            - Direct scal feedback for X-axis(tool spindle)
            - Direct scal feedback for Y-axis(tool spindle)
            - Direct scal feedback for Z-axis(tool spindle)(/1500)
            - Chuck foot switch(double) for Main and Counter spindle
            - Signal lower 3 layers(Red, yellow, green) LED type
            - Total counter
            - Manual pulse generator(separate type)
            - Cooling unit for electrical cabinet
            - Programming resolution mutipiled by 1/10
            - Memory card for Data server(CF card 1 GB)
            - Playback
            - Spindle 1 hobbing function
            - Automatic corner override
            - Coordinate system rotation
            - Addition of optional block skip (soft key type 2-9)
            - Direct drawing dimension programming
            - Interruption type custom macro
            - Tool offsets 480 sets in total
            - KCs mark 65kVA E30373 EMC(including cable)
            - Invo-Milling package Capto C6

            CE-Sign and only 5h (!!) Working Hours

          Datasheet
          Request / Contact
          used Lathes CNC Turning- and Milling Center TAKISAWA TCY 200Y L5


          • Kemmerich Werkzeugmaschinen GmbH
          • Im Rottfeld 1a
          • 40789 Monheim am Rhein
          • Deutschland

          • +49 2173 207474
            +49 2173 207473
          • info@kemmerich.biz
            www.kemmerich.biz
          #1020-18498 · CNC Turning- and Milling Center

          TAKISAWA - TCY 200Y L5 - - 2015 - Fanuc 32i-B

          Technical details
          turning diameter 220 mm︱turning length 454 mm︱control Fanuc 32i-B ︱swing dia. mm︱turning speed range - spindle 3200 U/min︱spindle motor 7.5/5.5 kW︱spindle bore 51 mm︱Turret 1 ︱Spindle speed driven tools 0-6000 min -1︱drive capacity - spindle motor 3.7/2.2 kW︱Traverse X-Axis 1 mm︱Traverse Z-Axis 1 mm︱rapid traverse X-axis 20 m/min︱rapid traverse Z-axis 24 m/min︱travel -y axis +50 / -50 mm︱rapid motion - y-axis 10 m/min︱tool change unit 12-fach (VDI 40) ︱total power requirement kVA︱weight of the machine ca. 4,5 t︱dimensions of the machine ca. 2,9 ×1,8 x 1,7 m︱
          equipped with: - CNC control FANUC 32i-B - 3-jaw Chuck SMW AutoBlok (210mm) - C-Axe / Y-Axe - Drive tool Holder: 2 pcs radial, 2 pcs Achsial - Toolholder - Chip Conveyor - Tailstock approx only 300 Work Hours
            turning diameter 220 mm
            turning length 454 mm
            control Fanuc 32i-B
            turning speed range - spindle 3200 U/min
            spindle motor 7.5/5.5 kW
            spindle bore 51 mm
            Spindle speed driven tools 0-6000 min -1
            drive capacity - spindle motor 3.7/2.2 kW
            rapid traverse X-axis 20 m/min
            rapid traverse Z-axis 24 m/min
            travel -y axis +50 / -50 mm
            rapid motion - y-axis 10 m/min
            tool change unit 12-fach (VDI 40)
            weight of the machine ca. 4,5 t
            dimensions of the machine ca. 2,9 ×1,8 x 1,7 m
            Description :
            equipped with:
            - CNC control FANUC 32i-B
            - 3-jaw Chuck SMW AutoBlok (210mm)
            - C-Axe / Y-Axe
            - Drive tool Holder: 2 pcs radial, 2 pcs Achsial
            - Toolholder
            - Chip Conveyor
            - Tailstock

            approx only 300 Work Hours
          Datasheet
          Request / Contact
          used Lathes CNC Turning- and Milling Center MEKITURN TNC890 X3000


          • Christoph Busch GmbH
          • Dieselstr. 22
          • 41352 Korschenbroich
          • Deutschland

          • +49 (0) 2182 570 5930
            +49 (0) 2182 5785202
          • mail@busch-gruppe.de
            www.busch-gruppe.de
          #2052-05076 · CNC Turning- and Milling Center

          MEKITURN - TNC890 X3000 - - 2015 - Heidenhain manual plus620

          Technical details
          serial number B5155730E ︱control Heidenhain manual plus620 ︱centre height 345 mm︱ 890 mm︱bed width 480 mm︱turning length 3.000 mm︱spindle turning speed range 1.500 U/min︱spindle bore diameter 104 mm︱spindle drive 24 kW︱chucking diameter 300 mm︱ 400 ︱rapid traverse X-axis 5 m/min︱rapid traverse Z-axis 10 m/min︱coolant ja ︱chip conveyor ja
            serial number B5155730E
            control Heidenhain manual plus620
            centre height 345 mm
            890 mm
            bed width 480 mm
            turning length 3.000 mm
            spindle turning speed range 1.500 U/min
            spindle bore diameter 104 mm
            spindle drive 24 kW
            chucking diameter 300 mm
            400
            rapid traverse X-axis 5 m/min
            rapid traverse Z-axis 10 m/min
            coolant ja
            chip conveyor ja
          Datasheet
          Request / Contact
          used Lathes CNC Turning- and Milling Center MAS Multicut 500i


          • MS Maschinenhandel GmbH
          • Unterdorf 34
          • 6532 Ladis
          • Österreich

          • +43 (0) 5472 219 07
            +43 (0) 5472 219 07 22
          • info@ms-maschinen.at
            www.ms-maschinen.at
          #2034-23 · CNC Turning- and Milling Center

          MAS - Multicut 500i - - 2015 - Siemens 840 D

          Technical details
          turning diameter 1030 mm︱turning length 1600 mm︱control Siemens 840 D ︱spindle bore 106 mm︱b-axis -120° /+105° °︱turning speed range - power take off spindle 3500 U/min︱speeds of universal milling head 12000 U/min︱milling spindle drive 22 kW︱y-travel 370 mm︱b-axis 0,001 °︱c-axis 360´ ︱c-axis 0,001´ ︱total power requirement 59/74 kW︱weight of the machine ca. 23 t︱dimensions of the machine ca. 5,4 x 3,9 x 3,8 m︱
            turning diameter 1030 mm
            turning length 1600 mm
            control Siemens 840 D
            spindle bore 106 mm
            b-axis -120° /+105° °
            turning speed range - power take. 3500 U/min
            speeds of universal milling head 12000 U/min
            milling spindle drive 22 kW
            y-travel 370 mm
            b-axis 0,001 °
            c-axis 360´
            c-axis 0,001´
            total power requirement 59/74 kW
            weight of the machine ca. 23 t
            dimensions of the machine ca. 5,4 x 3,9 x 3,8 m
          Datasheet
          Request / Contact
          used Lathes CNC Turning- and Milling Center DOOSAN PUMA  3100 LY


          • Kemmerich Werkzeugmaschinen GmbH
          • Im Rottfeld 1a
          • 40789 Monheim am Rhein
          • Deutschland

          • +49 2173 207474
            +49 2173 207473
          • info@kemmerich.biz
            www.kemmerich.biz
          #1020-18510 · CNC Turning- and Milling Center

          DOOSAN - PUMA 3100 LY - - 2014 - FANUC Series

          Technical details
          turning diameter 481 mm︱turning length 1315 mm︱control FANUC Series ︱turning diameter over bed 481 mm︱x-travel 310 mm︱z - travel 1245 mm︱y-travel 130 mm︱b-axis mm︱rapid travel x/y/z 12 m/min︱main spindle speeds: 2800 ︱spindle motor 22 kW︱max. torque on the spindle Nm︱Chip coveyor Inkl. ︱total power requirement Kva︱weight of the machine ca. 7 t︱dimensions of the machine ca. 4,6 x 2,11 x 2,3 m︱
          equipped with: - CNC control Fanuc-Series - 3-jaw chuck dia 400mm - C-axis 0.01 ° - 12-station tool turret - tailstock - chip conveyor - Thread cutting up to M 22 - Bezel 20-165mm - Coolant system with IKZ - measuring arm
            turning diameter 481 mm
            turning length 1315 mm
            control FANUC Series
            turning diameter over bed 481 mm
            x-travel 310 mm
            z - travel 1245 mm
            y-travel 130 mm
            rapid travel x/y/z 12 m/min
            main spindle speeds: 2800
            spindle motor 22 kW
            Chip coveyor Inkl.
            weight of the machine ca. 7 t
            dimensions of the machine ca. 4,6 x 2,11 x 2,3 m
            Description :
            equipped with:
            - CNC control Fanuc-Series
            - 3-jaw chuck dia 400mm
            - C-axis 0.01 °
            - 12-station tool turret
            - tailstock
            - chip conveyor
            - Thread cutting up to M 22
            - Bezel 20-165mm
            - Coolant system with IKZ
            - measuring arm

          Datasheet
          Request / Contact
          used Lathes CNC Turning- and Milling Center INDEX ABC 65


          • MS Maschinenhandel GmbH
          • Unterdorf 34
          • 6532 Ladis
          • Österreich

          • +43 (0) 5472 219 07
            +43 (0) 5472 219 07 22
          • info@ms-maschinen.at
            www.ms-maschinen.at
          #2034-40948 · CNC Turning- and Milling Center

          INDEX - ABC 65 - - 2014 - /

          Technical details
          turning diameter 65 mm︱turning length / mm︱control / ︱- number of spindles 2 ︱- - counter spindle: yes ︱- number of turrets 2 ︱- live positions: yes ︱WORKING RANGE TURNING ︱- turning diameter (max) 65 mm︱- bar diameter (max) 65 mm︱MAIN SPINDLE ︱- spindle revolutions (min) 6000 /min︱- drive power 4.2 kW︱- spindle torque 10 Nm︱COUNTER SPINDLE ︱- spindle revolutions (max) 6000 /min︱- drive power S6 40% 20 kW︱- drive power S6 40% 27 kW︱- spindle torque S6 40% 105 Nm︱- spindle torque S1 100% 145 Nm︱
            turning diameter 65 mm
            turning length / mm
            control /
            - number of spindles 2
            - number of turrets 2
            - turning diameter (max) 65 mm
            - bar diameter (max) 65 mm
            - spindle revolutions (min) 6000 /min
            - drive power 4.2 kW
            - spindle torque 10 Nm
            - spindle revolutions (max) 6000 /min
            - drive power S6 40% 20 kW
            - drive power S6 40% 27 kW
            - spindle torque S6 40% 105 Nm
            - spindle torque S1 100% 145 Nm
          Datasheet
          Request / Contact
          used Lathes CNC Turning- and Milling Center DOOSAN DNM400ii


          • Christoph Busch GmbH
          • Dieselstr. 22
          • 41352 Korschenbroich
          • Deutschland

          • +49 (0) 2182 570 5930
            +49 (0) 2182 5785202
          • mail@busch-gruppe.de
            www.busch-gruppe.de
          #2052-05165 · CNC Turning- and Milling Center

          DOOSAN - DNM400ii - - 2014 -

          Technical details
          travel -x axis 762 mm︱travel -y axis 435 mm︱travel -z axis 510 mm︱tool change unit ︱workpiece HSK63 ︱chip conveyor ︱weight of the machine ca. 5,3 t︱
            travel -x axis 762 mm
            travel -y axis 435 mm
            travel -z axis 510 mm
            workpiece HSK63
            weight of the machine ca. 5,3 t
          Datasheet
          Request / Contact
          used Lathes CNC Turning- and Milling Center DMG-GILDEMEISTER CTX 450 ecoline


          • Kemmerich Werkzeugmaschinen GmbH
          • Im Rottfeld 1a
          • 40789 Monheim am Rhein
          • Deutschland

          • +49 2173 207474
            +49 2173 207473
          • info@kemmerich.biz
            www.kemmerich.biz
          #1020-18539 · CNC Turning- and Milling Center

          DMG-GILDEMEISTER - CTX 450 ecoline - - 2014 - Siemens 840D

          Technical details
          turning diameter 400 mm︱turning length 600 mm︱control Siemens 840D ︱standard turning dia. 400 mm︱greates pass round over bed 650 mm︱swing diameter max. over bed cover 465 mm︱Main spindle: ︱turning speed range - main spindle 4000 min/-1︱power capacity - main spindel kW︱max. Torque Nm︱spindle bearing diameter mm︱chuck diameter mm︱max. usable bar diameter mm︱spindle nose 170h5 ︱C-Axis 0,001 °︱turret: ︱number of toolpositions 12 pos.︱tool taper VDI 40 ︱Number of driven toolspositions 12 pos.︱Spindle speed - driven tool stations 4000 min -1︱
          - CNC control Siemens Sinumerik 840D sl - C-Axe - 12- fold Revolver, driven Tools (VDI 40) - Chip Conveyor - 3-jaw Chuck 16700h Running- & 2700h Spindle Hours
            turning diameter 400 mm
            turning length 600 mm
            control Siemens 840D
            standard turning dia. 400 mm
            greates pass round over bed 650 mm
            swing diameter max. over bed cov. 465 mm
            turning speed range - main spind. 4000 min/-1
            spindle nose 170h5
            C-Axis 0,001 °
            number of toolpositions 12 pos.
            tool taper VDI 40
            Number of driven toolspositions 12 pos.
            Spindle speed - driven tool stat. 4000 min -1
            Description :
            - CNC control Siemens Sinumerik 840D sl
            - C-Axe
            - 12- fold Revolver, driven Tools (VDI 40)
            - Chip Conveyor
            - 3-jaw Chuck

            16700h Running- & 2700h Spindle Hours
          Datasheet
          Request / Contact
          used Lathes CNC Turning- and Milling Center MAZAK INTEGREX i400


          • Kemmerich Werkzeugmaschinen GmbH
          • Im Rottfeld 1a
          • 40789 Monheim am Rhein
          • Deutschland

          • +49 2173 207474
            +49 2173 207473
          • info@kemmerich.biz
            www.kemmerich.biz
          #1020-18320 · CNC Turning- and Milling Center

          MAZAK - INTEGREX i400 - - 2014 - Mazatrol Matrix 2

          Technical details
          turning diameter 760 mm︱workpiece length - max. 1524 mm︱control Mazatrol Matrix 2 ︱swing diameter 760 mm︱clamping range for bar work 102 mm︱workpiece weight 1000 kg︱------------ MAIN SPINDLE ------------ ︱turning speeds 35 - 3300 U/min︱passage of spindle 112 mm︱c-axis 1 ︱spindle motor 30 kW︱travel -x axis 630 mm︱travel -y axis 230 mm︱travel -z axis 1585 mm︱rapid travel x/y/z 38000 x 26000x 38000 mm/min︱milling spindle ︱spindle motor 18,5 kW︱milling head speed 12000 U/min︱weight of the machine ca. 12,7 t︱dimensions of the machine ca. 4,9 x 2,4 x 2,8 m︱
          - CNC Control Mazatrol Matrix 2 - ATC 20-fold
            turning diameter 760 mm
            workpiece length - max. 1524 mm
            control Mazatrol Matrix 2
            swing diameter 760 mm
            clamping range for bar work 102 mm
            workpiece weight 1000 kg
            turning speeds 35 - 3300 U/min
            passage of spindle 112 mm
            c-axis 1
            spindle motor 30 kW
            travel -x axis 630 mm
            travel -y axis 230 mm
            travel -z axis 1585 mm
            rapid travel x/y/z 38000 x 26000x 38000 mm/min
            spindle motor 18,5 kW
            milling head speed 12000 U/min
            weight of the machine ca. 12,7 t
            dimensions of the machine ca. 4,9 x 2,4 x 2,8 m
            Description :

            - CNC Control Mazatrol Matrix 2
            - ATC 20-fold
          Datasheet
          Request / Contact
          used Lathes CNC Turning- and Milling Center MAZAK Hyper Quadrex 150MSY


          • Marcels Maschinen AG
          • Anthoptstrasse 11
          • 8222 Beringen (Schaffhausen)
          • Schweiz

          • (0041) 44 872 3400
            (0041) 44 872 3403
          • info@marcels-maschinen.ch
            http://www.marcels-maschinen.ch
          #1065-J567 · CNC Turning- and Milling Center

          MAZAK - Hyper Quadrex 150MSY - - 2013 - Mazatrol Matrix II

          Technical details
          turning diameter 300 mm︱turning length 520 mm︱control Mazatrol Matrix II ︱swing diameter 320 mm︱spindle turning speed range 5000 + 6000 U/min︱weight of the machine ca. 9.6 t︱
          Sub-Spindle, 2x turrets, Y-axis, Bar loader LNS 2x Turret slides with 12 driven tools Bar loader LNS Diameter -52mm / Length -1000mm 2x Tool Eye 2x Measuring probes Renishaw 2x HAINBUCH collet chucks Several accessories More details on www.marcels-maschinen.ch
            turning diameter 300 mm
            turning length 520 mm
            control Mazatrol Matrix II
            swing diameter 320 mm
            spindle turning speed range 5000 + 6000 U/min
            weight of the machine ca. 9.6 t
            Description :
            Sub-Spindle, 2x turrets, Y-axis, Bar loader LNS

            2x Turret slides with 12 driven tools

            Bar loader LNS Diameter -52mm / Length -1000mm
            2x Tool Eye
            2x Measuring probes Renishaw

            2x HAINBUCH collet chucks
            Several accessories

            More details on www.marcels-maschinen.ch


          Datasheet
          Request / Contact
          •   
          •   
          • 1  
          • 2  
          • 3  
          • 4  
          • 5  
          • 6  
          •   
          •   


          A CNC Turning and Milling Center from LagerMaschinen
          A CNC turning and milling center from LagerMaschinen - good for business

          A CNC turning and milling center from LagerMaschinen will certainly be a great advantage to your small or medium-sized business. Choose from a CNC turning and milling center that fits your needs exactly. A CNC turning and milling center uses either one of multiple axes to calibrate and work wood metal or other hard materials. When purchasing a CNC turning and milling center from LagerMaschinen you'll be able to ensure quality control as well as to speak directly with sellers. Let LagerMaschinen's qualified experts assist you in your search for your next business machine.

          CNC turning and milling center from LagerMaschinen

          A CNC turning and milling center (also known as a lathe) can be used for many different purposes. No matter what your end product a CNC turning and milling center from LagerMaschinen is just what you need. Used machines are more economically viable as well as kinder to the environment. A CNC turning and milling center from LagerMaschinen could be the logical solution for your production concerns. By purchasing your CNC turning and milling center through LagerMaschinen and its team of experts and professionals you'll not only find precisely what you're looking for but will also ensure that it lasts for a lifetime.

          CNC turning and milling center - the most logical choice

          No matter what type of CNC turning and milling center you're looking for LagerMaschinen has what you need. Log on create and account and start shopping at LagerMaschinen today.