Metal Processing - Lathes

Machinelist: Lathes

Bar Automatic Lathe - Multi Spindle

ProdEq Trading
Reckholder 1
9527 Niederhelfenschwil
Schweiz

(0041)71 - 948 7060
(0041)71 - 948 7069
info@prodeq.ch
www.prodeq.ch

#1045-40534 · Bar Automatic Lathe - Multi Spindle

MIKRON - MULTISTAR CX-24 - - 2016 - SIEMENS S7

Technical details

number of spindles 24 ︱spindle passage mm︱turning length mm︱-------------------------------------------------- ︱BASIC FUNCTIONS ︱- number of spindles 24 ︱ELECTRICAL SPECIFICATIONS ︱- mains voltage 400 V︱- mains frequency 50 Hz︱DIMENSIONS / WEIGHTS ︱- space requirements -left/right- 8000 mm︱- space requirements -front/back- 5300 mm︱- total height 3200 mm︱ATTACHMENTS (TURNING) ︱- European CE standards: yes ︱

Accessories: - Wire roll stand f. wire rolls - Wire straightener Ø4.5 mm - Fire protection system CO2, Kraft + Bauer - Knoll oil filter system - 4 high pressure purging units - some spare parts

number of spindles 24

spindle passage mm

turning length mm

- number of spindles 24

- mains voltage 400 V

- mains frequency 50 Hz

- space requirements -left/right. 8000 mm

- space requirements -front/back. 5300 mm

- total height 3200 mm

- European CE standards: yes

Description :

Accessories:
- Wire roll stand f. wire rolls
- Wire straightener Ø4.5 mm
- Fire protection system CO2, Kraft + Bauer
- Knoll oil filter system
- 4 high pressure purging units
- some spare parts

Datasheet

used Lathes Bar Automatic Lathe - Multi Spindle INDEX MS 22-6 C

Knops Werkzeugmaschinen
Ronsdorfer Str. 143
40233 Düsseldorf
Deutschland

0211 8793140
0211 8793134
maschinen@knops.de
www.knops.de

#1022-E05657 · Bar Automatic Lathe - Multi Spindle

INDEX - MS 22-6 C - - 2012 - Siemens / Index C 200-4D

Technical details

number of spindles 6 ︱spindle passage 22 mm︱turning length mm︱Control Siemens / Index C 200-4D ︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱

The machine itself is from 2012, the Iemca bar feeder from 2008. The purchase price was around € 600,000 when it was new! Operating hours: 36500 Index control C200-4D (identical in construction to Siemens Sinumerik 840D) Speed max. 10000 rpm. Nominal speed 8300 rpm. Power at 25% ED 15 kW Torque at 25% ED 18 Nm Parcel machine with swiveling synchronous Electrical and mechanical preparation for the installation of a Fire extinguishing system Workpiece conveyor belt in spindle position 6 IEMCA SIR MS 22/43 / P area loader, bar length 4300 mm Hainbuch tension top Axfix D 22 Polygonal and thread milling device Behind processing device Chip conveyor Coolant system

number of spindles 6

spindle passage 22 mm

Control Siemens / Index C 200-4D

Description :

The machine itself is from 2012, the Iemca bar feeder from 2008.

The purchase price was around € 600,000 when it was new!

Operating hours: 36500

Index control C200-4D (identical in construction to Siemens Sinumerik 840D)
Speed max. 10000 rpm.
Nominal speed 8300 rpm.
Power at 25% ED 15 kW
Torque at 25% ED 18 Nm
Parcel machine with swiveling synchronous
Electrical and mechanical preparation for the installation of a
Fire extinguishing system
Workpiece conveyor belt in spindle position 6
IEMCA SIR MS 22/43 / P area loader, bar length 4300 mm
Hainbuch tension top Axfix D 22
Polygonal and thread milling device
Behind processing device
Chip conveyor
Coolant system

Datasheet

used Lathes Bar Automatic Lathe - Multi Spindle INDEX MS22C

Maturus TradeInvest GmbH
Brodschrangen 3-5
20457 Hamburg
Deutschland

+49 (0)40 3003936255
+49 (0)40 3003936249
info@maturus.com
www.maturus.com

#2055-SIHN1 · Bar Automatic Lathe - Multi Spindle

INDEX - MS22C - - 2008 -

Technical details

number of spindles 0 ︱spindle passage 0 mm︱turning length 0 mm︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱

S/N 270061 Power 44 kW 1 control panel Control Siemens C200-4D stated Operating hours 42,961 CO2 extinguishing system 1 separate control cabinet Chip conveyor 1 tuber S-1 FY 2008, Chip conveyor 2 Knoll VRF500 FY 2008 S/N 364900 Bar feeder IEMCA SIR-MS22P FY 2008 S/N 020816MA01 Weight 1.900 kg Tool kit Additional drives for cross machining, collets for counter spindle, drilling quill

Description :

S/N 270061
Power 44 kW
1 control panel
Control Siemens C200-4D
stated Operating hours 42,961
CO2 extinguishing system
1 separate control cabinet

Chip conveyor
1 tuber S-1
FY 2008,

Chip conveyor 2
Knoll VRF500
FY 2008
S/N 364900

Bar feeder
IEMCA SIR-MS22P
FY 2008
S/N 020816MA01
Weight 1.900 kg
Tool kit
Additional drives for cross machining, collets for counter spindle,
drilling quill

Datasheet

used Lathes Bar Automatic Lathe - Multi Spindle TORNOS Multideco 20-8

GWM GmbH
Gewerbestr. 2
79639 Grenzach-Wyhlen
Deutschland

(0049) 7624 9082 0
07624 9082-206
info@gromag.ch
www.gromag.ch

#1044-3066 · Bar Automatic Lathe - Multi Spindle

TORNOS - Multideco 20-8 - - 2002 - PNC-Deco Fanuc

Technical details

number of spindles 8 ︱spindle passage 20 mm︱turning length 80-100 mm︱control PNC-Deco Fanuc︱turning speeds 5000 U/min︱Sub-spindle 20 mm︱load magazine IEMCA PRA 52/33P︱Number of working hours h︱total power requirement 15 kW︱weight of the machine ca. 8 t︱

equipped with: - 23 axes, 8 spindle - Chip shut Switch-on Hours: 57133 h (with coolant device AE1058 Knoll Chip Conveyor) Serial-No: 1638 with complete documentation tool tapers

number of spindles 8

spindle passage 20 mm

turning length 80-100 mm

control PNC-Deco Fanuc

turning speeds 5000 U/min

Sub-spindle 20 mm

load magazine IEMCA PRA 52/33P

total power requirement 15 kW

weight of the machine ca. 8 t

Description :

equipped with:
- 23 axes, 8 spindle
- Chip shut
Switch-on Hours: 57133 h
(with coolant device AE1058 Knoll Chip Conveyor)
Serial-No: 1638
with complete documentation
tool tapers

Datasheet

used Lathes Bar Automatic Lathe - Multi Spindle INDEX MS 32C

STEINHAND GmbH
Wiehagen 10
45472 Mülheim a.d. Ruhr
Deutschland

+49 (0) 208 / 78 239 760
+49 (0) 208 / 78 239 685
info@steinhand.de
www.steinhand.de

#2026-1129 · Bar Automatic Lathe - Multi Spindle

INDEX - MS 32C - - 2002 - Siemens Sinumerik 840D

Technical details

number of spindles 6 ︱bar capacity 32 mm︱Spindle spped 6.300 UpM︱Control Siemens Sinumerik 840D ︱

Multi-spindle lathe INDEX MS 32 C The machine has worked machine in 1 to 2 shifts. Bar loader: IEMCA SIR MS32 / 43 / F (4 meter magazine) - Siemens SINUMERIK 840D with 16 free input / output - Single NCU - Artis tool monitoring The machine has one C axis / transmit function each on the 6 main spindles (Cylindrical path milling on lateral surface) 3 electrical preparations for auxiliary drives with electronic shaft. Counterspindle in position 6.1 with chuck RÖHM KPD-HS 92/3 Baking Oil central: 800 [L] - Pump 300 [l / min] with 4 bar - Pump 22 [l / min] with 40 bar Chip conveyor KNOLL Recently renewed / overhauled: - Cross slide 3.1 exchanged in June 2019 - Magazine overhaul in January 2019 HS 1-6 channel conversion series 1 to 3 complete, spring steel, Channel, opening group, toothed belt, slider carriage, screw set. Opening group set, stops set, Renewed hydraulic lines. - Clamping cylinder HS2 exchanged in June 2018 The machine is in a well-maintained condition and can be inspected under power at any time. All documentation, operating instructions, programming instructions, Maintenance plans, repair invoices are available. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: MS32C | MS32 C | 32 C

number of spindles 6

bar capacity 32 mm

Spindle spped 6.300 UpM

Control Siemens Sinumerik 840D

Description :

Multi-spindle lathe INDEX MS 32 C

The machine has worked machine in 1 to 2 shifts.
Bar loader: IEMCA SIR MS32 / 43 / F (4 meter magazine)

- Siemens SINUMERIK 840D with 16 free input / output
- Single NCU
- Artis tool monitoring

The machine has one C axis / transmit function each on the 6 main spindles
(Cylindrical path milling on lateral surface)
3 electrical preparations for auxiliary drives with electronic shaft.

Counterspindle in position 6.1 with chuck RÖHM KPD-HS 92/3 Baking

Oil central: 800 [L]
- Pump 300 [l / min] with 4 bar
- Pump 22 [l / min] with 40 bar
Chip conveyor KNOLL

Recently renewed / overhauled:

- Cross slide 3.1 exchanged in June 2019

- Magazine overhaul in January 2019
HS 1-6 channel conversion series 1 to 3 complete, spring steel,
Channel, opening group, toothed belt, slider carriage, screw set.
Opening group set, stops set,
Renewed hydraulic lines.

- Clamping cylinder HS2 exchanged in June 2018

The machine is in a well-maintained condition and
can be inspected under power at any time.

All documentation, operating instructions, programming instructions,
Maintenance plans, repair invoices are available.

- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
#Tags: MS32C | MS32 C | 32 C

Datasheet

used Lathes Bar Automatic Lathe - Multi Spindle INDEX MS32G

Maturus TradeInvest GmbH
Brodschrangen 3-5
20457 Hamburg
Deutschland

+49 (0)40 3003936255
+49 (0)40 3003936249
info@maturus.com
www.maturus.com

#2055-SIHN10 · Bar Automatic Lathe - Multi Spindle

INDEX - MS32G - - 2002 -

Technical details

number of spindles 0 ︱spindle passage 0 mm︱turning length 0 mm︱total power requirement 49 kW︱weight of the machine ca. 10,8 t︱dimensions of the machine ca. m︱

S/N 150134 1 control panel Control Siemens C200-4D CO2 extinguishing system Chip conveyor 1: Knoll VRF500 FY 2001 Chip conveyor 2: Knoll 400S-1 FY 2001 S/N 131404 separate switch cabinet Bar feeder: IEMCA SIR MS 32 FY 2002 P/N 0200243M01 Weight 900 kg Tool kit Additional drives for transverse machining Collets for counter spindle

total power requirement 49 kW

weight of the machine ca. 10,8 t

Description :

S/N 150134
1 control panel
Control Siemens C200-4D
CO2 extinguishing system
Chip conveyor 1:
Knoll VRF500
FY 2001

Chip conveyor 2:
Knoll 400S-1
FY 2001
S/N 131404
separate switch cabinet
Bar feeder:
IEMCA SIR MS 32
FY 2002
P/N 0200243M01
Weight 900 kg

Tool kit
Additional drives for transverse machining
Collets for counter spindle

Datasheet

used Lathes Bar Automatic Lathe - Multi Spindle INDEX MS42 C

Maturus TradeInvest GmbH
Brodschrangen 3-5
20457 Hamburg
Deutschland

+49 (0)40 3003936255
+49 (0)40 3003936249
info@maturus.com
www.maturus.com

#2055-V1 · Bar Automatic Lathe - Multi Spindle

INDEX - MS42 C - - 1992 -

Technical details

number of spindles 6 ︱spindle passage 42 mm︱turning length mm︱

number of spindles 6

spindle passage 42 mm

Datasheet

used Lathes Bar Automatic Lathe - Multi Spindle SCHÜTTE SF 20 DNT

HANS - JÜRGEN GEIGER
James-Watt-Str. 12
72555 Metzingen
Deutschland

(0049)-7123-18040
(0049)-7123-18384
geiger@geiger-germany.com
www.geiger-germany.com

#1049-274199 · Bar Automatic Lathe - Multi Spindle

SCHÜTTE - SF 20 DNT - - 1988 -

Technical details

number of spindles 6 ︱spindle passage 20 mm︱turning length 80 mm︱total power requirement 25 kW︱weight of the machine ca. 6,5 t︱

Max. bar Ø, normal 20 mm Max. bar Ø, square, hexagonal, octagonal 14 / 17 / 18 mm Max. bar feed 80 mm Stroke of longitudinal slide 63 / 39.5 mm Boring depth, max. 39.6 mm Stroke of cross slide, max. 32 / 25 mm Stroke of lower cross slide 40 / 26 mm 49 Spindle speeds 355 - 5,000 rpm No. of workpiece revolutions per work cycle 60 - 1.32 35 cutting times per part 0.36 - 53 sec Spindle drive 20.5 kW Total electrical load 25 kW - 380 V - 50 Hz Weight, approx. 6,500 kg Accessories / Special Features * Built-on bar loading magazine for bar length up to 4,000 mm. * Swing-in bar stop. * Dnt = direct selection of spindle speed and cycle time. The machine has a separate infinitely variable feed drive for optimal adaptation (via potentiometer) of cutting speed and feed rate, which can be varied during the working process. Direct display of speeds and cycles, as well as WOERLE Display for working status and error display. Setting up the machine for a new workpiece is quick and easy. * Pick-up device with hydraulic clamping for for back work, which allows burr-free cut-off, with electric supervision. * Longitudinal slide is equipped with 5 tool holders. Side slide is not equipped with tool holders. * Workpiece counter. * Coolant equipment. * Large separate hydraulic aggregate with hydraulic pressure on spindle drum, and the possibility for connection to a copying device. Pendant control. * Workpiece chute for finished parts with very long conveyor belt for removal of finished parts * Complete machine is noise damped.

number of spindles 6

spindle passage 20 mm

turning length 80 mm

total power requirement 25 kW

weight of the machine ca. 6,5 t

Description :

Max. bar Ø, normal 20 mm
Max. bar Ø, square, hexagonal, octagonal 14 / 17 / 18 mm
Max. bar feed 80 mm

Stroke of longitudinal slide 63 / 39.5 mm
Boring depth, max. 39.6 mm
Stroke of cross slide, max. 32 / 25 mm
Stroke of lower cross slide 40 / 26 mm

49 Spindle speeds 355 - 5,000 rpm
No. of workpiece revolutions per work cycle 60 - 1.32
35 cutting times per part 0.36 - 53 sec

Spindle drive 20.5 kW
Total electrical load 25 kW - 380 V - 50 Hz
Weight, approx. 6,500 kg

Accessories / Special Features
* Built-on bar loading magazine for bar length up to 4,000 mm.
* Swing-in bar stop.
* Dnt = direct selection of spindle speed and cycle time. The machine has a separate infinitely variable feed drive for optimal adaptation (via potentiometer) of cutting speed and feed rate, which can be varied during the working process. Direct display of speeds and cycles, as well as WOERLE Display for working status and error display. Setting up the machine for a new workpiece is quick and easy.
* Pick-up device with hydraulic clamping for for back work, which allows burr-free cut-off, with electric supervision.
* Longitudinal slide is equipped with 5 tool holders. Side slide is not equipped with tool holders.
* Workpiece counter. * Coolant equipment.
* Large separate hydraulic aggregate with hydraulic pressure on spindle drum, and the possibility for connection to a copying device. Pendant control.
* Workpiece chute for finished parts with very long conveyor belt for removal of finished parts
* Complete machine is noise damped.

Datasheet

used Lathes Bar Automatic Lathe - Multi Spindle INDEX MS 25

ProdEq Trading
Reckholder 1
9527 Niederhelfenschwil
Schweiz

(0041)71 - 948 7060
(0041)71 - 948 7069
info@prodeq.ch
www.prodeq.ch

#1045-39672 · Bar Automatic Lathe - Multi Spindle

INDEX - MS 25 - - 1987 -

Technical details

number of spindles 6 ︱spindle passage mm︱turning length mm︱-------------------------------------------------- ︱BASIC FUNCTIONS ︱- number of spindles 6 ︱WORKING RANGE TURNING ︱- turning diameter (max) 26 mm︱ELECTRICAL SPECIFICATIONS ︱- total power consumption 22 kW︱- mains voltage 400 V︱- mains frequency 50 Hz︱DIMENSIONS / WEIGHTS ︱- space requirements -left/right- 4500 mm︱- space requirements -front/back- 1100 mm︱- total height 1800 mm︱- total weight approx. 5000 kg︱ATTACHMENTS (TURNING) ︱- - bar length (max) 3000 mm︱

2013 Generalüberholung durch Hersteller Index Maschine in einem absolut gutem Zustand Anlage wurde in Oel betrieben inkl. Stangenlader Auf Anfrage Funktionsvideo verfügbar:

number of spindles 6

spindle passage mm

turning length mm

- number of spindles 6

- turning diameter (max) 26 mm

- total power consumption 22 kW

- mains voltage 400 V

- mains frequency 50 Hz

- space requirements -left/right. 4500 mm

- space requirements -front/back. 1100 mm

- total height 1800 mm

- total weight approx. 5000 kg

- - bar length (max) 3000 mm

Description :

2013 Generalüberholung durch Hersteller Index

Maschine in einem absolut gutem Zustand
Anlage wurde in Oel betrieben

inkl. Stangenlader

Auf Anfrage Funktionsvideo verfügbar:

Datasheet

ProdEq Trading
Reckholder 1
9527 Niederhelfenschwil
Schweiz

(0041)71 - 948 7060
(0041)71 - 948 7069
info@prodeq.ch
www.prodeq.ch

#1045-39109 · Bar Automatic Lathe - Multi Spindle

INDEX - MS 25 - - 1987 -

Technical details

number of spindles 6 ︱spindle passage 26 mm︱turning length mm︱-------------------------------------------------- ︱BASIC FUNCTIONS ︱- number of spindles 6 ︱- - counter spindle: yes ︱WORKING RANGE TURNING ︱- bar diameter (max) 26 mm︱ELECTRICAL SPECIFICATIONS ︱- mains voltage 400 V︱- mains frequency 50 Hz︱DIMENSIONS / WEIGHTS ︱- space requirements -left/right- 4500 mm︱- space requirements -front/back- 1100 mm︱- total height 1800 mm︱- total weight approx. 5000 kg︱ATTACHMENTS (TURNING) ︱- - bar length (max) 3000 mm︱

number of spindles 6

spindle passage 26 mm

turning length mm

- number of spindles 6

- - counter spindle: yes

- bar diameter (max) 26 mm

- mains voltage 400 V

- mains frequency 50 Hz

- space requirements -left/right. 4500 mm

- space requirements -front/back. 1100 mm

- total height 1800 mm

- total weight approx. 5000 kg

- - bar length (max) 3000 mm

Datasheet

used Lathes Bar Automatic Lathe - Multi Spindle PITTLER-ACME PRB 32/6

GWM GmbH
Gewerbestr. 2
79639 Grenzach-Wyhlen
Deutschland

(0049) 7624 9082 0
07624 9082-206
info@gromag.ch
www.gromag.ch

#1044-0737 · Bar Automatic Lathe - Multi Spindle

PITTLER-ACME - PRB 32/6 - - 1965 -

Technical details

number of spindles 6 ︱spindle passage 32 mm︱turning length 152 mm︱Speed 200-2800 U/min.︱turning diameter 32 mm︱feed Werkstoff: 254 mm︱

Accessories: multi edge turning, univ. thread cutting attachment, Strehleinrichtung, chip conveyor, 1 set collets, set of change wheels

number of spindles 6

spindle passage 32 mm

turning length 152 mm

Speed 200-2800 U/min.

turning diameter 32 mm

feed Werkstoff: 254 mm

Description :

Accessories:
multi edge turning, univ. thread cutting attachment,
Strehleinrichtung, chip conveyor, 1 set collets, set of change wheels

Datasheet

Bar Automatic Lathe - Single Spindle

Stiens Werkzeugmaschinen GmbH
Mittelweg 92
59302 Oelde
Deutschland

+49 252283490
(0049) - 2522 - 8349-20
info@stiens.de
www.stiens.de

#1039-8472 · Bar Automatic Lathe - Single Spindle

MAS KOVOSVIT - Optimat A22 (45) - - 2000 -

Technical details

spindle passage 22 mm︱bar feed max. 64 mm︱max. bar length 3.000 mm︱Main spindle: ︱turning speed range 23 - 4.457 min/-1︱power capacity - main spindel 4,0 kW︱supports: ︱number of cross-slides 3 ︱0 35 mm︱turret head: ︱number of toolpositions 6 pos.︱0 60 mm︱threading cutting device: ︱thread dia. M14 / M18 mm︱total power requirement 8,0 kW︱weight of the machine ca. 1,5 t︱dimensions of the machine ca. 6,0 x 2,0 x 2,0 m︱bar feeder interface ︱bar feeder Iemca Boss ︱

Single-Spindle-Bar Automatic Lathe MAS KOVOSVIT - Optimat A22 - incl. IEMCA Boss 332 Bar-Feeder

spindle passage 22 mm

bar feed max. 64 mm

max. bar length 3.000 mm

turning speed range 23 - 4.457 min/-1

power capacity - main spindel 4,0 kW

number of cross-slides 3

0 35 mm

number of toolpositions 6 pos.

0 60 mm

thread dia. M14 / M18 mm

total power requirement 8,0 kW

weight of the machine ca. 1,5 t

dimensions of the machine ca. 6,0 x 2,0 x 2,0 m

bar feeder Iemca Boss

Description :

Single-Spindle-Bar Automatic Lathe
MAS KOVOSVIT - Optimat A22

- incl. IEMCA Boss 332 Bar-Feeder

Datasheet

used Lathes Bar Automatic Lathe - Single Spindle MAS KOVOSVIT Optimat A22 (44)

Stiens Werkzeugmaschinen GmbH
Mittelweg 92
59302 Oelde
Deutschland

+49 252283490
(0049) - 2522 - 8349-20
info@stiens.de
www.stiens.de

#1039-8471 · Bar Automatic Lathe - Single Spindle

MAS KOVOSVIT - Optimat A22 (44) - - 2000 -

Technical details

Single-Spindle-Bar Automatic Lathe MAS KOVOSVIT - Optimat A22 - incl. IEMCA Boss 432 Bar-Feeder

spindle passage 22 mm

bar feed max. 64 mm

max. bar length 3.000 mm

turning speed range 23 - 4.457 min/-1

power capacity - main spindel 4,0 kW

number of cross-slides 3

0 35 mm

number of toolpositions 6 pos.

0 60 mm

thread dia. M14 / M18 mm

total power requirement 8,0 kW

weight of the machine ca. 1,5 t

dimensions of the machine ca. 6,0 x 2,0 x 2,0 m

bar feeder Iemca Boss

Description :

Single-Spindle-Bar Automatic Lathe
MAS KOVOSVIT - Optimat A22

- incl. IEMCA Boss 432 Bar-Feeder

Datasheet

used Lathes Bar Automatic Lathe - Single Spindle INDEX GE 65 C

Markus Hirsch GmbH
Niersweg 84
47877 Willich
Deutschland

+49 2156 49894 12
+49 2156 49894 10
hirsch@hirsch-maschinen.de
www.hirsch-maschinen.de

#1077-03277 · Bar Automatic Lathe - Single Spindle

INDEX - GE 65 C - - 1992 - C200T

Technical details

spindle passage 65 mm︱turning length 360 mm︱bore depth mm︱Control C200T ︱turning diameter 175 mm︱transmission ratio 2 ︱chuck diameter 200 mm︱power capacity 6,3 kW︱chip conveyor ︱tool taper VDI 40 ︱bar loader ︱live tooling ︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱

spindle passage 65 mm

turning length 360 mm

Control C200T

turning diameter 175 mm

transmission ratio 2

chuck diameter 200 mm

power capacity 6,3 kW

tool taper VDI 40

Datasheet

used Lathes Bar Automatic Lathe - Single Spindle INDEX GE 25

Markus Hirsch GmbH
Niersweg 84
47877 Willich
Deutschland

+49 2156 49894 12
+49 2156 49894 10
hirsch@hirsch-maschinen.de
www.hirsch-maschinen.de

#1077-03405 · Bar Automatic Lathe - Single Spindle

INDEX - GE 25 - - -

Technical details

spindle passage 25 mm︱turning speeds 5750 U/min︱Rest 4 ︱turret head 8 ︱thread cutting attachment ︱bar loader LNZ Hydrobar︱type 6.26HS-4.4 ︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱

spindle passage 25 mm

turning speeds 5750 U/min

Rest 4

turret head 8

bar loader LNZ Hydrobar

type 6.26HS-4.4

Datasheet

Markus Hirsch GmbH
Niersweg 84
47877 Willich
Deutschland

+49 2156 49894 12
+49 2156 49894 10
hirsch@hirsch-maschinen.de
www.hirsch-maschinen.de

#1077-03408 · Bar Automatic Lathe - Single Spindle

INDEX - GE 25 - - -

Technical details

spindle passage 25 mm︱turning speeds 5750 U/min︱Rest 4 ︱turret head 8 ︱thread cutting attachment ︱bar loader LNZ Hydrobar︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱

spindle passage 25 mm

turning speeds 5750 U/min

Rest 4

turret head 8

bar loader LNZ Hydrobar

Datasheet

Markus Hirsch GmbH
Niersweg 84
47877 Willich
Deutschland

+49 2156 49894 12
+49 2156 49894 10
hirsch@hirsch-maschinen.de
www.hirsch-maschinen.de

#1077-03404 · Bar Automatic Lathe - Single Spindle

INDEX - GE 25 - - -

Technical details

spindle passage 25 mm︱turning speeds 5750 U/min︱Rest 4 ︱straight turning atchm. - working travel . mm︱turret head 8 ︱thread cutting attachment ︱bar loader LNZ Hydrobar︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱

spindle passage 25 mm

turning speeds 5750 U/min

Rest 4

straight turning atchm. - workin. . mm

turret head 8

bar loader LNZ Hydrobar

Datasheet

used Lathes Bar Automatic Lathe - Single Spindle INDEX B 60

Markus Hirsch GmbH
Niersweg 84
47877 Willich
Deutschland

+49 2156 49894 12
+49 2156 49894 10
hirsch@hirsch-maschinen.de
www.hirsch-maschinen.de

#1077-03412 · Bar Automatic Lathe - Single Spindle

INDEX - B 60 - - -

Technical details

spindle passage 60 mm︱cross-slide 4 ︱turret head 6 Pos.︱thread cutting attachment ︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱

spindle passage 60 mm

cross-slide 4

turret head 6 Pos.

Datasheet

Markus Hirsch GmbH
Niersweg 84
47877 Willich
Deutschland

+49 2156 49894 12
+49 2156 49894 10
hirsch@hirsch-maschinen.de
www.hirsch-maschinen.de

#1077-03403 · Bar Automatic Lathe - Single Spindle

INDEX - GE 25 - - -

Technical details

spindle passage 25 mm︱turning speeds 5750 U/min︱Rest 4 ︱straight turning atchm. - working travel . mm︱turret head 8 ︱thread cutting attachment ︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱

spindle passage 25 mm

turning speeds 5750 U/min

Rest 4

straight turning atchm. - workin. . mm

turret head 8

Datasheet

Markus Hirsch GmbH
Niersweg 84
47877 Willich
Deutschland

+49 2156 49894 12
+49 2156 49894 10
hirsch@hirsch-maschinen.de
www.hirsch-maschinen.de

#1077-03406 · Bar Automatic Lathe - Single Spindle

INDEX - GE 25 - - -

Technical details

spindle passage 25 mm︱turning speeds 5750 U/min︱Rest 4 ︱turret head 8 ︱thread cutting attachment ︱bar loader LNZ Hydrobar︱type 6.30HS-4.4 ︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱

spindle passage 25 mm

turning speeds 5750 U/min

Rest 4

turret head 8

bar loader LNZ Hydrobar

type 6.30HS-4.4

Datasheet

Markus Hirsch GmbH
Niersweg 84
47877 Willich
Deutschland

+49 2156 49894 12
+49 2156 49894 10
hirsch@hirsch-maschinen.de
www.hirsch-maschinen.de

#1077-03402 · Bar Automatic Lathe - Single Spindle

INDEX - GE 25 - - -

Technical details

spindle passage 25 mm︱turning speeds 5750 U/min︱Rest 4 ︱straight turning atchm. - working travel . mm︱turret head 8 ︱thread cutting attachment ︱bar loader LNZ Hydrobar︱type 6.32HS-4.4 ︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱

spindle passage 25 mm

turning speeds 5750 U/min

Rest 4

straight turning atchm. - workin. . mm

turret head 8

bar loader LNZ Hydrobar

type 6.32HS-4.4

Datasheet

used Lathes Bar Automatic Lathe - Single Spindle INDEX GS30

Markus Hirsch GmbH
Niersweg 84
47877 Willich
Deutschland

+49 2156 49894 12
+49 2156 49894 10
hirsch@hirsch-maschinen.de
www.hirsch-maschinen.de

#1077-03410 · Bar Automatic Lathe - Single Spindle

INDEX - GS30 - - - Index

Technical details

spindle passage 34 mm︱turning length . mm︱bore depth . mm︱Control Index ︱type S 3 ︱live tooling ︱bar loader Sameca ︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱

spindle passage 34 mm

turning length . mm

bore depth . mm

Control Index

type S 3

bar loader Sameca

Datasheet

Markus Hirsch GmbH
Niersweg 84
47877 Willich
Deutschland

+49 2156 49894 12
+49 2156 49894 10
hirsch@hirsch-maschinen.de
www.hirsch-maschinen.de

#1077-03411 · Bar Automatic Lathe - Single Spindle

INDEX - B 60 - - -

Technical details

spindle passage 60 mm︱cross-slide 4 ︱turret head 6 Pos.︱thread cutting attachment ︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱

spindle passage 60 mm

cross-slide 4

turret head 6 Pos.

Datasheet

Markus Hirsch GmbH
Niersweg 84
47877 Willich
Deutschland

+49 2156 49894 12
+49 2156 49894 10
hirsch@hirsch-maschinen.de
www.hirsch-maschinen.de

#1077-03407 · Bar Automatic Lathe - Single Spindle

INDEX - GE 25 - - -

Technical details

spindle passage 25 mm

turning speeds 5750 U/min

Rest 4

straight turning atchm. - workin. . mm

turret head 8

bar loader LNZ Hydrobar

Datasheet

Find the best used lathes and more at LagerMaschinen

Lathes offer versatility and efficiency to your workshop

Lathes have stood the test of time as some of the most efficient and multi-functional tools. They can be used on a wide variety of material surfaces and can serve a huge number of functions. Whether you need a small lathe for home use or an industrial size lathe for large-scale production, you can find the perfect piece of used equipment to suit your needs at LagerMaschinen. Visit this easy-to-use forum to find the best used machinery for your needs.

LagerMaschinen - your home for used machines

Lathes are critical pieces of equipment in a wide variety of sectors. A lathe is capable of grinding, cutting and finishing tiny parts for watch- and jewellery-making, as well as large-scale pieces for automobiles and airplanes. Whether you prefer the control offered by a manually operated lathe or the precision and efficiency of a computer numerical controlled (CNC) lathe, you can find a huge selection at LagerMaschinen, your best source for used machinery.

Buying used machines is a smart investment

Smart shoppers know that you dont have to sacrifice quality for affordability when buying machinery for your home or business. Buying used machines is a great way to get the quality you need without straining your budget. If youre in the market for lathes, saws, grinders or any other equipment, you can find a great selection of used machines at LagerMaschinen. Sort results by price, location or brand and find the best used machines around.

TOP Manufacturer:

GILDEMEISTER - INDEX - POREBA - ZMM - MORI SEIKI - MAZAK - WEILER - TOS - HUVEMA - SCHAUBLIN -