European network of stockholding machinery dealers

Category:
    Manufacturer:
      Machines:
        Trader:

          Metal Processing - Surface Grinding Machine

          Machinelist: Surface Grinding Machine


          Surface Grinding Machine

          used Grinding machines Surface Grinding Machine ELB-SCHLIFF SWD20 VAI


          • SKM Industriemaschinen
          • Röntgenstr. 3
          • 89264 Weißenhorn
          • Deutschland

          • +49 (0) 7309 954 986 0
            +49 (0) 7309 954 986 1
          • info@skm-maschinen.de
            www.skm-maschinen.de
          #2032-1565 · Surface Grinding Machine

          ELB-SCHLIFF - SWD20 VAI - - unbekannt -

          Technical details
          grinding length 2000 mm︱grinding width 700 mm︱workpiece height mm︱Control ︱total power requirement kW︱weight of the machine ca. 11,0 t︱dimensions of the machine ca. 6,2 x 2,9 x 2,9 m︱
          - Guides in good condition - Electric cabinet was overhauled in 2009 for the equivalent of € 16,000
            grinding length 2000 mm
            grinding width 700 mm
            weight of the machine ca. 11,0 t
            dimensions of the machine ca. 6,2 x 2,9 x 2,9 m
            Description :
            - Guides in good condition
            - Electric cabinet was overhauled in 2009 for the equivalent of € 16,000
          Datasheet
          Request / Contact
          used Grinding machines Surface Grinding Machine CHEVALIER FSG-1224ADIII


          • HESSE+CO Maschinenfabrik GesmbH
          • Straße 4 Objekt 8
          • 2351 Wiener Neudorf
          • Österreich

          • +43/2236/638 70-0
            +43/2236/636 62
          • office@hesse-maschinen.com
            https://www.hesse-maschinen.com
          #1069-2283 · Surface Grinding Machine

          CHEVALIER - FSG-1224ADIII - - 2018 -

          Technical details
          610 mm︱ 600 x 300 mm︱ 610 x 305 x 610 mm︱ 300 x 600 mm︱ 650 mm︱ 700 mm︱ 3 - 32 mm︱ 320 mm︱ 3,7 kW︱ 1 kW︱ 1 kW︱ 355 x 50 x 127 mm︱ 5,6 kW︱ 2.950 mm︱ 1.490 mm︱ 2.080 mm︱ 2.200 kg︱
          8" grafic NC-control on swiveling arm with touch screen for: - seletion of working mode, program creation, graphic condition control, alarm list aut. vertical feed servo drive for grinding wheel feed and table cross feed hardened slide ways in all 3 axes with needle rollers grinding wheel spindle on 4 high precision angular contact bearings electro-magnetic chuck coolant equiptment with aut. paper filter and magnetic separator man. extractor with diamond grinding wheel grinding wheel flange grinding wheel balancing scale balance arbor LED machine lamp machine and equipment according to the CE-regulations user manual in GERMAN and ENGLISH distance spindle-table: 610 mm table: 600 x 300 mm grinding area: 610 x 305 x 610 mm magnetic chuck: 300 x 600 mm table movement hydraulic: 650 mm table movement manual: 700 mm table speed: 5 - 25 m/min cross feed rapid travel: 0 - 2,250 m/min aut. cross feed incremental: 3 - 32 mm max. cross feed: 320 mm cross fine feed: 0,001 mm aut. feed: 0,001 - 0,04 mm rapid feed approx.: 675 mm/min fine feed: 0,001 mm spindle speed: 1.450 U/min spindle drive: 3,7 kW hydraulic drive: 0,74 kW cross feed drive: 1 kW elevating drive: 1 kW grinding wheel dimensions: 355 x 50 x 127 mm motor: 5,6 kW length: 2.950 mm width: 1.490 mm height: 2.080 mm weight: 2.200 kg
            610 mm
            600 x 300 mm
            610 x 305 x 610 mm
            300 x 600 mm
            650 mm
            700 mm
            3 - 32 mm
            320 mm
            3,7 kW
            1 kW
            1 kW
            355 x 50 x 127 mm
            5,6 kW
            2.950 mm
            1.490 mm
            2.080 mm
            2.200 kg
            Description :
            8" grafic NC-control on swiveling arm with touch screen for:
            - seletion of working mode, program creation, graphic condition control, alarm list
            aut. vertical feed
            servo drive for grinding wheel feed and table cross feed
            hardened slide ways in all 3 axes with needle rollers
            grinding wheel spindle on 4 high precision angular contact bearings
            electro-magnetic chuck
            coolant equiptment with aut. paper filter and magnetic separator
            man. extractor with diamond
            grinding wheel
            grinding wheel flange
            grinding wheel balancing scale
            balance arbor
            LED machine lamp
            machine and equipment according to the CE-regulations
            user manual in GERMAN and ENGLISH



            distance spindle-table: 610 mm
            table: 600 x 300 mm
            grinding area: 610 x 305 x 610 mm
            magnetic chuck: 300 x 600 mm
            table movement hydraulic: 650 mm
            table movement manual: 700 mm
            table speed: 5 - 25 m/min
            cross feed rapid travel: 0 - 2,250 m/min
            aut. cross feed incremental: 3 - 32 mm
            max. cross feed: 320 mm
            cross fine feed: 0,001 mm
            aut. feed: 0,001 - 0,04 mm
            rapid feed approx.: 675 mm/min
            fine feed: 0,001 mm
            spindle speed: 1.450 U/min
            spindle drive: 3,7 kW
            hydraulic drive: 0,74 kW
            cross feed drive: 1 kW
            elevating drive: 1 kW
            grinding wheel dimensions: 355 x 50 x 127 mm
            motor: 5,6 kW
            length: 2.950 mm
            width: 1.490 mm
            height: 2.080 mm
            weight: 2.200 kg
          Datasheet
          Request / Contact
          used Grinding machines Surface Grinding Machine SCHLEIFPOWER FSM 3060 AHD


          • HESSE+CO Maschinenfabrik GesmbH
          • Straße 4 Objekt 8
          • 2351 Wiener Neudorf
          • Österreich

          • +43/2236/638 70-0
            +43/2236/636 62
          • office@hesse-maschinen.com
            https://www.hesse-maschinen.com
          #1069-1798 · Surface Grinding Machine

          SCHLEIFPOWER - FSM 3060 AHD - - 2017 -

          Technical details
          495 mm︱ 635 x 305 mm︱ 765 mm︱ 600 x 300 mm︱ 350 x 40 x 127 mm︱ 270 kg︱ 5,5 kW︱ 2.100 mm︱ 2.000 mm︱ 1.950 mm︱ 1.900 kg︱
          2-axes digital read-out aut. vertical feed by SIEMENS TD400C control (freely selectable feed order, rough grinding/fine grinding) grinding wheel with flange wheel balance arbour electro-magnetic chuck hydraulic longitudinal feed automatic cross feed  automatic demagnetiser man. parallel wheel dressing device coolant device separate hydraulic unit aut. central lubrication dressing diamond operator tools machine and equipment according to the CE-regulations user manual in GERMAN and ENGLISH distance spindle-table: 495 mm table: 635 x 305 mm longitudinal travel: 765 mm magnetic clamping plate: 600 x 300 mm spindle speed: 1.450 r.p.m. grinding wheel dimensions: 350 x 40 x 127 mm max. work piece weight: 270 kg spindle motor power: 5,5 kW length: 2.100 mm width: 2.000 mm height: 1.950 mm weight: 1.900 kg
            495 mm
            635 x 305 mm
            765 mm
            600 x 300 mm
            350 x 40 x 127 mm
            270 kg
            5,5 kW
            2.100 mm
            2.000 mm
            1.950 mm
            1.900 kg
            Description :
            2-axes digital read-out
            aut. vertical feed by SIEMENS TD400C control (freely selectable feed order, rough grinding/fine grinding)
            grinding wheel with flange
            wheel balance arbour
            electro-magnetic chuck
            hydraulic longitudinal feed
            automatic cross feed 
            automatic demagnetiser
            man. parallel wheel dressing device
            coolant device
            separate hydraulic unit
            aut. central lubrication
            dressing diamond
            operator tools
            machine and equipment according to the CE-regulations
            user manual in GERMAN and ENGLISH

            distance spindle-table: 495 mm
            table: 635 x 305 mm
            longitudinal travel: 765 mm
            magnetic clamping plate: 600 x 300 mm
            spindle speed: 1.450 r.p.m.
            grinding wheel dimensions: 350 x 40 x 127 mm
            max. work piece weight: 270 kg
            spindle motor power: 5,5 kW
            length: 2.100 mm
            width: 2.000 mm
            height: 1.950 mm
            weight: 1.900 kg
          14.560 €
          Datasheet
          Request / Contact
          used Grinding machines Surface Grinding Machine SCHLEIFPOWER FSM 4080AHD


          • HESSE+CO Maschinenfabrik GesmbH
          • Straße 4 Objekt 8
          • 2351 Wiener Neudorf
          • Österreich

          • +43/2236/638 70-0
            +43/2236/636 62
          • office@hesse-maschinen.com
            https://www.hesse-maschinen.com
          #1069-1854 · Surface Grinding Machine

          SCHLEIFPOWER - FSM 4080AHD - - 2016 -

          Technical details
          580 mm︱ 810 x 400 mm︱ 910 mm︱ 800 x 400 mm︱ 350 x 40 x 127 mm︱ 500 kg︱ 5,5 kW︱ 2.620 mm︱ 2.400 mm︱ 1.930 mm︱ 3.800 kg︱
          2-axes digital read-out grinding wheel with flange wheel balance arbour electro-magnetic chuck hydraulic longitudinal feed automatic cross feed automatic vertical feed automatic demagnetiser man. parallel wheel dressing device coolant device separate hydraulic unit aut. central lubrication dressing diamond operator tools machine and equipment according to the CE-regulations user manual in GERMAN and ENGLISH distance spindle-table: 580 mm table: 810 x 400 mm longitudinal travel: 910 mm magnetic clamping plate: 800 x 400 mm spindle speed: 1.450 r.p.m. grinding wheel dimensions: 350 x 40 x 127 mm max. work piece weight: 500 kg spindle motor power: 5,5 kW length: 2.620 mm width: 2.400 mm height: 1.930 mm weight: 3.800 kg
            580 mm
            810 x 400 mm
            910 mm
            800 x 400 mm
            350 x 40 x 127 mm
            500 kg
            5,5 kW
            2.620 mm
            2.400 mm
            1.930 mm
            3.800 kg
            Description :
            2-axes digital read-out
            grinding wheel with flange
            wheel balance arbour
            electro-magnetic chuck
            hydraulic longitudinal feed
            automatic cross feed
            automatic vertical feed
            automatic demagnetiser
            man. parallel wheel dressing device
            coolant device
            separate hydraulic unit
            aut. central lubrication
            dressing diamond
            operator tools
            machine and equipment according to the CE-regulations
            user manual in GERMAN and ENGLISH

            distance spindle-table: 580 mm
            table: 810 x 400 mm
            longitudinal travel: 910 mm
            magnetic clamping plate: 800 x 400 mm
            spindle speed: 1.450 r.p.m.
            grinding wheel dimensions: 350 x 40 x 127 mm
            max. work piece weight: 500 kg
            spindle motor power: 5,5 kW
            length: 2.620 mm
            width: 2.400 mm
            height: 1.930 mm
            weight: 3.800 kg
          17.680 €
          Datasheet
          Request / Contact
          used Grinding machines Surface Grinding Machine SCHLEIFPOWER FSM 2550 AHD


          • HESSE+CO Maschinenfabrik GesmbH
          • Straße 4 Objekt 8
          • 2351 Wiener Neudorf
          • Österreich

          • +43/2236/638 70-0
            +43/2236/636 62
          • office@hesse-maschinen.com
            https://www.hesse-maschinen.com
          #1069-471 · Surface Grinding Machine

          SCHLEIFPOWER - FSM 2550 AHD - - 2015 -

          Technical details
          450 mm︱ 600 x 254 mm︱ 600 mm︱ 508 x 254 mm︱ 200 x 20 x 312 mm︱ 180 kg︱ 2,2 kW︱ 2.200 mm︱ 1.800 mm︱ 1.850 mm︱ 1.800 kg︱
          2-axes digital read-out grinding wheel with flange wheel balance arbour electro-magnetic chuck hydraulic longitudinal feed automatic cross feed automatic vertical feed automatic demagnetiser man. parallel wheel dressing device coolant device separate hydraulic unit aut. central lubrication dressing diamond operator tools machine and equipment according to the CE-regulations user manual in GERMAN and ENGLISH distance spindle-table: 450 mm table: 600 x 254 mm longitudinal travel: 600 mm magnetic clamping plate: 508 x 254 mm spindle speed: 2.850 r.p.m. grinding wheel dim.: 200 x 20 x 312 mm max. work piece weight: 180 kg spindle motor power: 2,2 kW length: 2.200 mm width: 1.800 mm height: 1.850 mm weight: 1.800 kg
            450 mm
            600 x 254 mm
            600 mm
            508 x 254 mm
            200 x 20 x 312 mm
            180 kg
            2,2 kW
            2.200 mm
            1.800 mm
            1.850 mm
            1.800 kg
            Description :
            2-axes digital read-out
            grinding wheel with flange
            wheel balance arbour
            electro-magnetic chuck
            hydraulic longitudinal feed
            automatic cross feed
            automatic vertical feed
            automatic demagnetiser
            man. parallel wheel dressing device
            coolant device
            separate hydraulic unit
            aut. central lubrication
            dressing diamond
            operator tools
            machine and equipment according to the CE-regulations
            user manual in GERMAN and ENGLISH





            distance spindle-table: 450 mm
            table: 600 x 254 mm
            longitudinal travel: 600 mm
            magnetic clamping plate: 508 x 254 mm
            spindle speed: 2.850 r.p.m.
            grinding wheel dim.: 200 x 20 x 312 mm
            max. work piece weight: 180 kg
            spindle motor power: 2,2 kW
            length: 2.200 mm
            width: 1.800 mm
            height: 1.850 mm
            weight: 1.800 kg
          11.520 €
          Datasheet
          Request / Contact
          used Grinding machines Surface Grinding Machine MININI PL 8.32 CNC


          • Aleman Machines e.K.
          • Am Mühlweg 1
          • 73466 Lauchheim
          • Deutschland

          • +49 (0)7363-6098 20
            +49 (0)7363-6098 19
          • info@aleman-machines.com
            www.aleman-machines.com
          #1120-100028 · Surface Grinding Machine

          MININI - PL 8.32 CNC - - 2007 - SIEMENS 840D

          Technical details
          grinding length 3150 mm︱grinding width 800 mm︱workpiece height 650 mm︱Control SIEMENS 840D ︱table surface area 3.150 x 600 mm︱magnetic plate size 3.000 x 600 mm︱grinding wheel size 450 x 100 x 127 mm︱total power requirement 22 kW︱dimensions of the machine ca. 11 x 3 x 2,4 m m︱
            grinding length 3150 mm
            grinding width 800 mm
            workpiece height 650 mm
            Control SIEMENS 840D
            table surface area 3.150 x 600 mm
            magnetic plate size 3.000 x 600 mm
            grinding wheel size 450 x 100 x 127 mm
            total power requirement 22 kW
            dimensions of the machine ca. 11 x 3 x 2,4 m m
          Datasheet
          Request / Contact
          used Grinding machines Surface Grinding Machine CHEVALIER Super 612


          • Christoph Busch GmbH
          • Dieselstr. 22
          • 41352 Korschenbroich
          • Deutschland

          • +49 (0) 2182 570 5930
            +49 (0) 2182 5785202
          • mail@busch-gruppe.de
            www.busch-gruppe.de
          #2052-04771 · Surface Grinding Machine

          CHEVALIER - Super 612 - - 2007 -

          Technical details
          travel -x axis 600 mm︱ 600 - 120 mm︱weight of the machine ca. 1,1 t︱
            travel -x axis 600 mm
            600 - 120 mm
            weight of the machine ca. 1,1 t
          Datasheet
          Request / Contact
          used Grinding machines Surface Grinding Machine JUNG JE 525


          • Gustav Schönberger GmbH
          • Hünderstr. 14
          • 74080 Heilbronn
          • Deutschland

          • (0049)7131 46060
            (0049)7131 460620
          • schoenberger@gsh-maschinen.de
            www.gsh-maschinen.de
          #1036-061653 · Surface Grinding Machine

          JUNG - JE 525 - - 2003 -

          Technical details
          grinding length 500 mm︱grinding width 200 mm︱
          1 gebr. CNC Flach-/Profilschleifmaschine Fabr. Jung JE 525, Bj.2003 1 used CNC Surface/Profile Grinding Machine Jung JE 525, built 200 Elektromagnetspannplatte electro magnet plate Technische Daten / technical details: gr. Schleiflänge / max. grinding length 600 mm gr. Schleifbreite / max. grinding width 200 mm Vertikalweg (Y-Achse) / vertical travel (Y-axis) 400 mm max. Querbewegung / max. travel cross 225 mm Magnetspannplatte / magnet clamping plate 500x180 mm Drehzahlbereich / speed of grinding wheel 800-4200 UpM Vorschub Y-Achse / infeed Y-axis 0,1-2000 mm/min Vorschub Z-Achse / infeed Z-axis 0,1-2000 mm/min Schleifscheibe (DxBxd) / grinding wheel 250x25x51 mm Gewicht der Maschine / weight 3000 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding.
            grinding length 500 mm
            grinding width 200 mm
            Description :
            1 gebr. CNC Flach-/Profilschleifmaschine Fabr. Jung JE 525, Bj.2003
            1 used CNC Surface/Profile Grinding Machine Jung JE 525, built 200

            Elektromagnetspannplatte
            electro magnet plate

            Technische Daten / technical details:
            gr. Schleiflänge / max. grinding length 600 mm
            gr. Schleifbreite / max. grinding width 200 mm
            Vertikalweg (Y-Achse) / vertical travel (Y-axis) 400 mm
            max. Querbewegung / max. travel cross 225 mm
            Magnetspannplatte / magnet clamping plate 500x180 mm
            Drehzahlbereich / speed of grinding wheel 800-4200 UpM
            Vorschub Y-Achse / infeed Y-axis 0,1-2000 mm/min
            Vorschub Z-Achse / infeed Z-axis 0,1-2000 mm/min
            Schleifscheibe (DxBxd) / grinding wheel 250x25x51 mm
            Gewicht der Maschine / weight 3000 kg
            Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich -
            Technical data, accessories and description of the machine are not binding.

          Datasheet
          Request / Contact
          used Grinding machines Surface Grinding Machine BLOHM PLANOMAT 608


          • FLECKENSTEIN Werkzeugmaschinen GmbH
          • Sommerweg 15
          • 63831 Wiesen
          • Deutschland

          • +49 (0) 6096 9706 0
            +49 (0) 6096 9706 20
          • fleckenstein@fleckenstein-machine.com
            www.fleckenstein-machine.com
          #1118-1541 · Surface Grinding Machine

          BLOHM - PLANOMAT 608 - - 2001 - ERGOMATIC

          Technical details
          grinding length 800 mm︱grinding width 600 mm︱workpiece height mm︱control ERGOMATIC ︱headstock: dist. table - spindle center 700 mm︱max. table load 800 kg︱Length movement of the table mm︱table clamping with additional space 1.200 x 600 mm︱table longitudinal travel 900 mm︱table speed 30-3.000/300-30.000 ︱adjustment of X-movement by soft key on control pa ︱guidance system pretensioned roller guide ︱table drive Servo-Motor with ball scr kW︱manual table adjustment via joystick on the contr ︱measuring system 0,001 mm rotatorisch ︱Y-axis - vertical adjustment of the grinding wheel ︱max. distance table to spindle centre 700 mm︱rapid traverse 3.750 m/min︱guidance system pretensioned roller guide ︱axis drive servo motor with ball scr
          BLOHM Grinding control ERGOMATIC Movable setup console in the middle of the machine: Electronic handwheels for conventional operation of the machine for axes Y and Z. Joy stick for the axes X and Z. Feed control per axis via potentiometer, also active during program run. Control panel on support arm on the right side of the machine: LC display, visible area 121 x 103 mm, with backlight Membrane keyboard with short-stroke keys for acknowledging recommended default values or for entry of freely selectable parameters with the following functions: - Loading position X and Z axis - Set or change reversing points during the program - Set zero points for Y and Z axis - Set safety position - Set grinding wheel data - Select dressing function Softkey for preselection measuring system metric / inch Info button for help texts and service instructions Display for operating hours and maintenance intervals Fixed programs for workshop-related, operator-friendly handling: - Reciprocating loops with automatic Y-feed - Longitudinal, circumferential and surface grinding with intermittent or continuous crossfeed and automatic Y positioning - Grinding wheel adjustment with handwheel or automatic - ECO loops with automatic Y positioning: 1st layer: plunge grinding "roughing" 2nd layer: Surface grinding "finishing" 3rd layer: surface grinding "fine finishing" Automatic Y positioning: 3 layers with dressing, 10 parameter sets for 10 delivery programs storable, allowance or finished dimension grinding preselectable. Dressing programs: - Straight dressing from the table with compensation by single diamond, foldable dressing unit. - face dressing with single diamond or foldable dressing unit. - Dressing with compensation by automatic straightening device. - Deep dressing with compensation by PEA-T100. Coolant cleaning equipment Coolant system with belt filter (tank capacity 1,400 l) consisting of: - Belt filter with a cleaning surface of 2.25 m² for a flow rate of 250 l / min - Supply pump 200 l / min, 4 bar - Additional pump for water trough flushing and rinsing gun - Cooling unit for coolant emulsion with max. 5% grinding concentrate - Power 4.9 kW (4,200 kcal / h), refrigerant CFC-free Equipment/Accessories - Basic machine with work enclosure closed at the top - Spindle drive 15 kW, frequency controlled - Manual balancing device MPM incl. Vibration sensor and speed sensor - Belt filter coolant cleaning system Tank capacity 1,400 liters - Pneumatically folding dressing unit - Electro-permanent magnetic clamping plate 800 x 600 mm, transverse pole pitch 4 mm, with 8-fold adhesion control - 2 pieces of grinding wheel flanges - 1 pc. balancing mandrel - Machine documentation incl. CE conformity declaration - Finish: RAL 5009 azure / RAL 9002 gray white Grinding spindle insert renewed 02-2016
            grinding length 800 mm
            grinding width 600 mm
            control ERGOMATIC
            headstock: dist. table - spindle. 700 mm
            max. table load 800 kg
            table clamping with additional s. 1.200 x 600 mm
            table longitudinal travel 900 mm
            table speed 30-3.000/300-30.000
            adjustment of X-movement by soft key on control pa
            guidance system pretensioned roller guide
            table drive Servo-Motor with ball scr kW
            manual table adjustment via joystick on the contr
            measuring system 0,001 mm rotatorisch
            max. distance table to spindle c. 700 mm
            rapid traverse 3.750 m/min
            guidance system pretensioned roller guide
            axis drive servo motor with ball scr
            Description :
            BLOHM Grinding control ERGOMATIC
            Movable setup console in the middle of the machine:
            Electronic handwheels for conventional operation of the machine for axes Y and
            Z.
            Joy stick for the axes X and Z.
            Feed control per axis via potentiometer, also active during program run.

            Control panel on support arm on the right side of the machine:
            LC display, visible area 121 x 103 mm, with backlight
            Membrane keyboard with short-stroke keys for acknowledging recommended default
            values or for entry of freely selectable parameters with the following
            functions:
            - Loading position X and Z axis
            - Set or change reversing points during the program
            - Set zero points for Y and Z axis
            - Set safety position
            - Set grinding wheel data
            - Select dressing function
            Softkey for preselection measuring system metric / inch
            Info button for help texts and service instructions
            Display for operating hours and maintenance intervals

            Fixed programs for workshop-related, operator-friendly handling:
            - Reciprocating loops with automatic Y-feed
            - Longitudinal, circumferential and surface grinding with intermittent or
            continuous crossfeed
            and automatic Y positioning
            - Grinding wheel adjustment with handwheel or automatic
            - ECO loops with automatic Y positioning:
            1st layer: plunge grinding "roughing"
            2nd layer: Surface grinding "finishing"
            3rd layer: surface grinding "fine finishing"
            Automatic Y positioning: 3 layers with dressing, 10 parameter sets for 10
            delivery programs storable, allowance or finished dimension grinding
            preselectable.

            Dressing programs:
            - Straight dressing from the table with compensation by single diamond,
            foldable dressing unit.
            - face dressing with single diamond or foldable dressing unit.
            - Dressing with compensation by automatic straightening device.
            - Deep dressing with compensation by PEA-T100.

            Coolant cleaning equipment

            Coolant system with belt filter (tank capacity 1,400 l) consisting of: - Belt
            filter with a cleaning surface of 2.25 m² for a flow rate of 250 l / min -
            Supply pump 200 l / min, 4 bar - Additional pump for water trough flushing and
            rinsing gun - Cooling unit for coolant emulsion with max. 5% grinding
            concentrate - Power 4.9 kW (4,200 kcal / h), refrigerant CFC-free

            Equipment/Accessories
            - Basic machine with work enclosure closed at the top
            - Spindle drive 15 kW, frequency controlled
            - Manual balancing device MPM incl. Vibration sensor and speed sensor
            - Belt filter coolant cleaning system Tank capacity 1,400 liters
            - Pneumatically folding dressing unit
            - Electro-permanent magnetic clamping plate 800 x 600 mm, transverse pole
            pitch 4 mm, with 8-fold adhesion control
            - 2 pieces of grinding wheel flanges
            - 1 pc. balancing mandrel
            - Machine documentation incl. CE conformity declaration
            - Finish: RAL 5009 azure / RAL 9002 gray white
            Grinding spindle insert renewed 02-2016
          Datasheet
          Request / Contact
          used Grinding machines Surface Grinding Machine GEIBEL & HOTZ FS 60 AC


          • Kemmerich Werkzeugmaschinen GmbH
          • Im Rottfeld 1a
          • 40789 Monheim am Rhein
          • Deutschland

          • +49 2173 207474
            +49 2173 207473
          • info@kemmerich.biz
            www.kemmerich.biz
          #1020-18149 · Surface Grinding Machine

          GEIBEL & HOTZ - FS 60 AC - - 1999 - conv.

          Technical details
          grinding length 600 mm︱grinding width 350 mm︱distance spindle center to table 525 mm︱magnetic clamping plate 600 x 350 mm︱max. table load 400 kg︱table adjustment - longitudinal 660 mm︱table speeds 2 - 28 m/min︱cross travel 360 mm︱grinding wheel size 300 x 50 x 76,2 mm︱Clamping width 30 mm︱driving power - grinding spindle 3,7 kW︱Control conv. ︱total power requirement 8 kW︱weight of the machine ca. 2,1 t︱dimensions of the machine ca. 4,5 x 3,0 x 2,4 m︱
          - Coolant with Paperbandfilter - Documentation
            grinding length 600 mm
            grinding width 350 mm
            distance spindle center to table 525 mm
            magnetic clamping plate 600 x 350 mm
            max. table load 400 kg
            table adjustment - longitudinal 660 mm
            table speeds 2 - 28 m/min
            cross travel 360 mm
            grinding wheel size 300 x 50 x 76,2 mm
            Clamping width 30 mm
            driving power - grinding spindle 3,7 kW
            Control conv.
            total power requirement 8 kW
            weight of the machine ca. 2,1 t
            dimensions of the machine ca. 4,5 x 3,0 x 2,4 m
            Description :
            - Coolant with Paperbandfilter
            - Documentation
          Datasheet
          Request / Contact
          used Grinding machines Surface Grinding Machine GEIBEL & HOTZ FS 60 AC


          • Stiens Werkzeugmaschinen GmbH
          • Mittelweg 92
          • 59302 Oelde
          • Deutschland

          • +49 252283490
            (0049) - 2522 - 8349-20
          • info@stiens.de
            www.stiens.de
          #1039-8393 · Surface Grinding Machine

          GEIBEL & HOTZ - FS 60 AC - - 1998 - conv.

          Technical details
          grinding length max. 600 mm︱grinding width max. 350 mm︱Control conv. ︱distance spindle center to table max. 525 mm︱magnetic clamping plate 600 x 350 mm︱max. table load 400 kg︱table adjustment - longitudinal 660 mm︱table speeds 2 - 28 m/min︱cross travel 360 mm︱grinding wheel size max. 300 x 50 x 76,2 mm︱Clamping width max. 30 mm︱driving power - grinding spindle 3,7 kW︱total power requirement 8 kW︱weight of the machine ca. 2,1 t︱dimensions of the machine ca. 4,5 x 3,0 x 2,4 m︱Documents
          Surface-Grindingmachine GEIBEL & HOTZ - FS 60 AC
            grinding length max. 600 mm
            grinding width max. 350 mm
            Control conv.
            distance spindle center to table max. 525 mm
            magnetic clamping plate 600 x 350 mm
            max. table load 400 kg
            table adjustment - longitudinal 660 mm
            table speeds 2 - 28 m/min
            cross travel 360 mm
            grinding wheel size max. 300 x 50 x 76,2 mm
            Clamping width max. 30 mm
            driving power - grinding spindle 3,7 kW
            total power requirement 8 kW
            weight of the machine ca. 2,1 t
            dimensions of the machine ca. 4,5 x 3,0 x 2,4 m
            Description :
            Surface-Grindingmachine
            GEIBEL & HOTZ - FS 60 AC
          Datasheet
          Request / Contact
          used Grinding machines Surface Grinding Machine ROSA ERMANDO ROSA linea  IRON 12.6


          • FIMOTEC
          • 20 RUE AMPERE
          • 67500 HAGUENAU
          • Frankreich

          • +33 (0)388720247
            +33 (0)388936066
          • FIMOTEC@WANADOO.FR
            WWW.FIMOTEC.FR
          #1105-02883 · Surface Grinding Machine

          ROSA ERMANDO - ROSA linea IRON 12.6 - - 1996 - conventionnal rosa

          Technical details
          grinding length 1350 mm︱grinding width 610 mm︱workpiece height 480 mm︱control conventionnal rosa︱magnetic clamping plate 1.200 x 450 mm︱max. table load 1.300 kg︱x-axis 50 ︱x-travel 1350 mm︱Feed speed 1 - 40 m/min︱y-axis ︱y-travel 550 mm︱Feed speed 0 - 8 m/min︱z-axis ︱Distance between table surface and spindle center 680 mm︱Feed speed 0 - 8 m/min︱Grinding spindle 400 60 x 127 ︱drive capacity - spindle motor 15 / 11 kW︱grinding wheel speeds 1.500 U/min︱grinding wheel size 400 x 30 - 80 x 127 mm︱Noise level 76 dB(A)︱
          NC - Surface Grinding Machine ROSA ERMANDO - LINEA STERLL 11.6 - Power-On: approx. 4.600h - Spindle-Runtime: approx. 1.000h - extensive Equipment (Clamping devices, Magnetic-Plate, Vices, Compensating System, Grinding Wheels)
            grinding length 1350 mm
            grinding width 610 mm
            workpiece height 480 mm
            control conventionnal rosa
            magnetic clamping plate 1.200 x 450 mm
            max. table load 1.300 kg
            x-axis 50
            x-travel 1350 mm
            Feed speed 1 - 40 m/min
            y-travel 550 mm
            Feed speed 0 - 8 m/min
            Distance between table surface a. 680 mm
            Feed speed 0 - 8 m/min
            Grinding spindle 400 60 x 127
            drive capacity - spindle motor 15 / 11 kW
            grinding wheel speeds 1.500 U/min
            grinding wheel size 400 x 30 - 80 x 127 mm
            Noise level 76 dB(A)
            Description :
            NC - Surface Grinding Machine
            ROSA ERMANDO - LINEA STERLL 11.6

            - Power-On: approx. 4.600h
            - Spindle-Runtime: approx. 1.000h
            - extensive Equipment (Clamping devices, Magnetic-Plate, Vices, Compensating System, Grinding Wheels)
          Datasheet
          Request / Contact
          used Grinding machines Surface Grinding Machine ZIERSCH & BALTRUSCH STARLINE 1000 NC


          • FLECKENSTEIN Werkzeugmaschinen GmbH
          • Sommerweg 15
          • 63831 Wiesen
          • Deutschland

          • +49 (0) 6096 9706 0
            +49 (0) 6096 9706 20
          • fleckenstein@fleckenstein-machine.com
            www.fleckenstein-machine.com
          #1118-1536 · Surface Grinding Machine

          ZIERSCH & BALTRUSCH - STARLINE 1000 NC - - 1996 - SINUMERIK 805

          Technical details
          grinding length 1.000 mm︱grinding width 500 mm︱workpiece height 300 mm︱magnetic table ︱table length 800 mm︱table width 500 mm︱max. table load 1.200 kg︱pole pitch 20 mm︱table feed 40 m/min︱Y-axis vertical adjustment grinding spindle ︱guiding system linear guideway ︱cross feed 10.000 mm/min︱measuring system linear scale, incremental ︱resolution 0,001 mm︱Z-axis cross adjustment ︱guiding system ︱cross feed 10.000 ︱measuring system linear scale, incremental ︱resolution 0,0001 mm︱grinding spindle head
          Further Accessories: Rotational speed control wet grinding unit with universal – paper filter unit – volume 300 l Grinding wheel management via CNC control Oil/Air cooling unit Hydraulic unit Work room guard, open on top Electro-permanent-magnetic table 800 x 500 mm, incl. magnetic force adjustment (50 – 100%) Fixed dressing unit with two diamonds fixed right of the table Ca. 5 pieces wheel flange taper 50 mm Documentation
            grinding length 1.000 mm
            grinding width 500 mm
            workpiece height 300 mm
            table length 800 mm
            table width 500 mm
            max. table load 1.200 kg
            pole pitch 20 mm
            table feed 40 m/min
            guiding system linear guideway
            cross feed 10.000 mm/min
            measuring system linear scale, incremental
            resolution 0,001 mm
            cross feed 10.000
            measuring system linear scale, incremental
            resolution 0,0001 mm
            Description :
            Further Accessories:
            Rotational speed control
            wet grinding unit with universal – paper filter unit – volume 300 l
            Grinding wheel management via CNC control
            Oil/Air cooling unit
            Hydraulic unit
            Work room guard, open on top
            Electro-permanent-magnetic table 800 x 500 mm, incl. magnetic force adjustment
            (50 – 100%)
            Fixed dressing unit with two diamonds fixed right of the table
            Ca. 5 pieces wheel flange taper 50 mm
            Documentation
          Datasheet
          Request / Contact
          used Grinding machines Surface Grinding Machine JUNG C 740 CNC-C


          • Christoph Busch GmbH
          • Dieselstr. 22
          • 41352 Korschenbroich
          • Deutschland

          • +49 (0) 2182 570 5930
            +49 (0) 2182 5785202
          • mail@busch-gruppe.de
            www.busch-gruppe.de
          #2052-04781 · Surface Grinding Machine

          JUNG - C 740 CNC-C - - 1996 - Siemens Sinumeric 840C

          Technical details
          serial number 8022 ︱control Siemens Sinumeric 840C ︱weight of the machine ca. 3,8 t︱magnetic clamping plate, electical 700 x 400 mm︱turning speeds 4.400 U/min︱max. dia. of grinding wheel 400 mm︱
            serial number 8022
            control Siemens Sinumeric 840C
            weight of the machine ca. 3,8 t
            magnetic clamping plate, electic. 700 x 400 mm
            turning speeds 4.400 U/min
            max. dia. of grinding wheel 400 mm
          Datasheet
          Request / Contact
          used Grinding machines Surface Grinding Machine jakobsen 824 auto


          • FIMOTEC
          • 20 RUE AMPERE
          • 67500 HAGUENAU
          • Frankreich

          • +33 (0)388720247
            +33 (0)388936066
          • FIMOTEC@WANADOO.FR
            WWW.FIMOTEC.FR
          #1105-02633 · Surface Grinding Machine

          jakobsen - 824 auto - - 1995 -

          Technical details
          grinding length 600 mm︱grinding width 250 mm︱grinding height 325 mm︱table load 200 kg︱weight of the machine ca. 1.5 t︱
          jakobsen grinding maschine plan type 824 very nice
            grinding length 600 mm
            grinding width 250 mm
            grinding height 325 mm
            table load 200 kg
            weight of the machine ca. 1.5 t
            Description :
            jakobsen grinding maschine plan
            type 824 very nice
          Datasheet
          Request / Contact
          used Grinding machines Surface Grinding Machine APN RVC-250


          • Christoph Busch GmbH
          • Dieselstr. 22
          • 41352 Korschenbroich
          • Deutschland

          • +49 (0) 2182 570 5930
            +49 (0) 2182 5785202
          • mail@busch-gruppe.de
            www.busch-gruppe.de
          #2052-04597 · Surface Grinding Machine

          APN - RVC-250 - - 1995 -

          Technical details
          250 mm︱total wight 550 kg︱discus grinding machine
            250 mm
            total wight 550 kg
          Datasheet
          Request / Contact
          used Grinding machines Surface Grinding Machine ZIERSCH & BALTRUSCH Starline 800


          • STEINHAND GmbH
          • Wiehagen 10
          • 45472 Mülheim a.d. Ruhr
          • Deutschland

          • +49 (0) 208 / 78 239 760
            +49 (0) 208 / 78 239 685
          • info@steinhand.de
            www.steinhand.de
          #2026-1139 · Surface Grinding Machine

          ZIERSCH & BALTRUSCH - Starline 800 - - 1995 - Siemens 805

          Technical details
          grinding wheel diameter 300 mm︱grinding wheel width max. 50 mm︱grinding wheel hole 76,2 mm︱control Siemens 805 ︱capacity X-axis 800 mm︱capacity Y-axis 600 mm︱capacity Z-axis 300 mm︱ 600 x 300 mm︱
          Further information: - Maintenance was carried out by Deyle Maschinenservice. - swivel dresser for dressing all kind of forms - Documentation is available Equipment: - grinding wheel holders - grinding wheels The machine has worked in a Swiss factory and is in good condition. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: Starline800
            grinding wheel diameter 300 mm
            grinding wheel width max. 50 mm
            grinding wheel hole 76,2 mm
            control Siemens 805
            capacity X-axis 800 mm
            capacity Y-axis 600 mm
            capacity Z-axis 300 mm
            600 x 300 mm
            Description :
            Further information:

            - Maintenance was carried out by Deyle Maschinenservice.
            - swivel dresser for dressing all kind of forms
            - Documentation is available

            Equipment:

            - grinding wheel holders
            - grinding wheels

            The machine has worked in a Swiss factory
            and is in good condition.

            - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
            #Tags: Starline800
          Datasheet
          Request / Contact
          used Grinding machines Surface Grinding Machine ELB OPTIMAL 4250 NC-K


          • FIMOTEC
          • 20 RUE AMPERE
          • 67500 HAGUENAU
          • Frankreich

          • +33 (0)388720247
            +33 (0)388936066
          • FIMOTEC@WANADOO.FR
            WWW.FIMOTEC.FR
          #1105-02617 · Surface Grinding Machine

          ELB - OPTIMAL 4250 NC-K - - 1993 -

          Technical details
          grinding length 450 mm︱grinding width 250 mm︱workpiece height 375 mm︱table length 800 mm︱table width 250 mm︱max. workpiece weight 400 kg︱automatic cross feed adjustable 3-50 mm/Hub︱vertical adjustment, 1 graduation 0.001 - 0.06 mm︱grinding wheel diameter 300 mm︱grinding wheel width 50 mm︱ 36 mm︱connected load frequency 380 V︱grinding wheel motor 3.7 / 4.7 kW︱total power requirement 9 kW︱weight of the machine ca. 2.6 t︱dimensions of the machine ca. 2800 X 2500 2300 mm︱
            grinding length 450 mm
            grinding width 250 mm
            workpiece height 375 mm
            table length 800 mm
            table width 250 mm
            max. workpiece weight 400 kg
            automatic cross feed adjustable 3-50 mm/Hub
            vertical adjustment, 1 graduatio. 0.001 - 0.06 mm
            grinding wheel diameter 300 mm
            grinding wheel width 50 mm
            36 mm
            connected load frequency 380 V
            grinding wheel motor 3.7 / 4.7 kW
            total power requirement 9 kW
            weight of the machine ca. 2.6 t
            dimensions of the machine ca. 2800 X 2500 2300 mm
          Datasheet
          Request / Contact
          used Grinding machines Surface Grinding Machine GEIBEL + HOTZ FS 60 Compact


          • HESSE+CO Maschinenfabrik GesmbH
          • Straße 4 Objekt 8
          • 2351 Wiener Neudorf
          • Österreich

          • +43/2236/638 70-0
            +43/2236/636 62
          • office@hesse-maschinen.com
            https://www.hesse-maschinen.com
          #1069-3328 · Surface Grinding Machine

          GEIBEL + HOTZ - FS 60 Compact - - 1993 -

          Technical details
          525 mm︱ 660 x 360 mm︱ 600 x 350 mm︱ 300 x 50 x 76,2 mm︱ 400 kg︱ 3,7 kW︱ 8 kW︱ x. 30 ma mm︱ 4.500 mm︱ 3.000 mm︱ 2.400 mm︱ 2.100 kg︱
          control conv. puller new pulling diamond user manual in GERMAN Comply with the present industrial safety regulations (AMVO & UVV) distance spindle-table: 525 mm table: 660 x 360 mm magnetic clamping plate: 600 x 350 mm table speed: 2-28 m/min grinding wheel dim.: 300 x 50 x 76,2 mm max. work piece weight: 400 kg spindle motor power: 3,7 kW machine motor power ca.: 8 kW length: 4.500 mm width: 3.000 mm height: 2.400 mm weight: 2.100 kg
            525 mm
            660 x 360 mm
            600 x 350 mm
            300 x 50 x 76,2 mm
            400 kg
            3,7 kW
            8 kW
            x. 30 ma mm
            4.500 mm
            3.000 mm
            2.400 mm
            2.100 kg
            Description :
            control conv.
            puller
            new pulling diamond
            user manual in GERMAN
            Comply with the present industrial safety regulations (AMVO & UVV)

            distance spindle-table: 525 mm
            table: 660 x 360 mm
            magnetic clamping plate: 600 x 350 mm
            table speed: 2-28 m/min
            grinding wheel dim.: 300 x 50 x 76,2 mm
            max. work piece weight: 400 kg
            spindle motor power: 3,7 kW
            machine motor power ca.: 8 kW
            length: 4.500 mm
            width: 3.000 mm
            height: 2.400 mm
            weight: 2.100 kg
          Datasheet
          Request / Contact
          used Grinding machines Surface Grinding Machine JAKOBSEN SJ 824


          • HANS - JÜRGEN GEIGER
          • James-Watt-Str. 12
          • 72555 Metzingen
          • Deutschland

          • (0049)-7123-18040
            (0049)-7123-18384
          • geiger@geiger-germany.com
            www.geiger-germany.com
          #1049-724861 · Surface Grinding Machine

          JAKOBSEN - SJ 824 - - 1992 -

          Technical details
          grinding length 600 mm︱grinding width 250 mm︱workpiece height 350 mm︱total power requirement 4,5 kW︱weight of the machine ca. 2100 kg︱dimensions of the machine ca. m︱
            grinding length 600 mm
            grinding width 250 mm
            workpiece height 350 mm
            total power requirement 4,5 kW
            weight of the machine ca. 2100 kg
          Datasheet
          Request / Contact
          used Grinding machines Surface Grinding Machine ELB STAR II / VA II


          • A + B Werkzeuge Maschinen Handels GmbH
          • Rottweg 17
          • 48683 Ahaus
          • Deutschland

          • (0049)-2561-9384-71
            (0049)-2561-9384-36
          • info@ab-maschinen.de
            www.ab-maschinen.de
          #1008-9238905 · Surface Grinding Machine

          ELB - STAR II / VA II - - 1990 -

          Technical details
          grinding length 630 mm︱grinding width 200 mm︱workpiece height 345 mm︱magnetic plate size 500 x 200 mm︱table load 200 kg︱grinding wheel size 76 x 160/250 mm︱speed Tisch 2,0 - 30 m/min︱total power requirement 7,0 kW︱weight 2.000 kg︱range L-W-H 2680 x 1770 x 1920 mm︱
          magnet table 1000 x 400 mm
            grinding length 630 mm
            grinding width 200 mm
            workpiece height 345 mm
            magnetic plate size 500 x 200 mm
            table load 200 kg
            grinding wheel size 76 x 160/250 mm
            speed Tisch 2,0 - 30 m/min
            total power requirement 7,0 kW
            weight 2.000 kg
            range L-W-H 2680 x 1770 x 1920 mm
            Description :
            magnet table 1000 x 400 mm
          Datasheet
          Request / Contact
          used Grinding machines Surface Grinding Machine G-H FS 40 Primus


          • Christoph Busch GmbH
          • Dieselstr. 22
          • 41352 Korschenbroich
          • Deutschland

          • +49 (0) 2182 570 5930
            +49 (0) 2182 5785202
          • mail@busch-gruppe.de
            www.busch-gruppe.de
          #2052-04562 · Surface Grinding Machine

          G-H - FS 40 Primus - - 1988 -

          Technical details
          x-travel 450 mm︱ 400 x 200 mm︱automatic feed of abrasive wheel ︱weight of the machine ca. 1,6 t︱sn 1730188
            x-travel 450 mm
            400 x 200 mm
            weight of the machine ca. 1,6 t
          Datasheet
          Request / Contact
          used Grinding machines Surface Grinding Machine MARTA A80-20


          • Christoph Busch GmbH
          • Dieselstr. 22
          • 41352 Korschenbroich
          • Deutschland

          • +49 (0) 2182 570 5930
            +49 (0) 2182 5785202
          • mail@busch-gruppe.de
            www.busch-gruppe.de
          #2052-04948 · Surface Grinding Machine

          MARTA - A80-20 - - 1988 -

          Technical details
          grinding length 800 mm︱grinding width 200 mm︱weight of the machine ca. 3,3 t︱
            grinding length 800 mm
            grinding width 200 mm
            weight of the machine ca. 3,3 t
          Datasheet
          Request / Contact
          used Grinding machines Surface Grinding Machine MARTA MF 60-30


          • Christoph Busch GmbH
          • Dieselstr. 22
          • 41352 Korschenbroich
          • Deutschland

          • +49 (0) 2182 570 5930
            +49 (0) 2182 5785202
          • mail@busch-gruppe.de
            www.busch-gruppe.de
          #2052-04916 · Surface Grinding Machine

          MARTA - MF 60-30 - - 1988 -

          Technical details
          grinding length 600 mm︱grinding width 300 mm︱filter unit ︱weight of the machine ca. 2,4 t︱
            grinding length 600 mm
            grinding width 300 mm
            weight of the machine ca. 2,4 t
          Datasheet
          Request / Contact


          Surface grinding machines with LagerMaschinen
          LagerMaschinen's used surface grinding machines

          Finding the right machine for your business can be difficult. Whether you're just starting up a small company or hoping to expand production purchasing new machinery for your factory floor can be a daunting - and expensive - task. LagerMaschinen's online platform international selection and delivery and installation services can help make this transition seamless as well as practically priced. This unique solution bypasses the complicated and sometimes overwhelming process of buying a new machine directly on the market. Much like purchasing a new vehicle purchasing a new machine can be overwhelming. Used machines are not only more financially sound but also come with the knowledge the seller will impart to you. When searching for surface grinding machines there are many specifications to be met.

          Find which of our surface grinding machines is right for you.

          Surface grinding machines are used in many different types of industry. These large-scale machines level out a surface until it is smooth and flat. In the case of woodworking the wood is then ready for varnishing. Both horizontal and vertical surface grinding machines are available through LagerMaschinen as well as various disc grinders. You can also search for equipment and accessories for your surface grinding machines on LagerMaschinen: replacement grinding wheels water-based and petroleum-based cutting fluids. These items are best found on a platform of professionals who can offer help and advice and possibly sell you your next machine. Find the next addition to your factory floor on LagerMaschinen today and make not only a wise financial choice but network with others in your field simultaneously.