European network of stockholding machinery dealers

Bitte einen Suchbegriff eingeben - Please enter a search term
Category:
    Manufacturer:
      Machines:
        Trader:

          Jig Grinding Machine

          Machinelist: Jig Grinding Machine


          Jig Grinding Machine

          used Grinding machines Jig Grinding Machine WMW-MIKROMAT MIKROMAT 6 S


          • INTER-PLAST
          • 42-209 Czestochowa

          • +48 343 627 904
            +48 785 198 061
          • iweta@inter-plast.com.pl
            www.inter-plast.com.pl
          #1129-623 · Jig Grinding Machine

          WMW-MIKROMAT - MIKROMAT 6 S - - unbekannt -

          Technical details
          x-travel 710 mm︱y-travel 400 mm︱workpiece height mm︱total power requirement kW︱weight of the machine ca. 4,5 t︱dimensions of the machine ca. m︱
            x-travel 710 mm
            y-travel 400 mm
            weight of the machine ca. 4,5 t


        • INTER-PLAST
        • 42-209 Czestochowa

        • Datasheet
          Request / Contact
          used Grinding machines Jig Grinding Machine HAUSER 3 SMO


          • Feyen Maschinen GmbH
          • Gelleperstr. 10
          • 47809 Krefeld
          • Deutschland

          • 0049 (0)2151/5267-0
            0049 (0)2151/5267-39
          • info@feyen.de
            www.feyen.de
          #1053-001788 · Jig Grinding Machine

          HAUSER - 3 SMO - - Serien-No. 907/82 -

          Technical details
          x-travel 400 mm︱y-travel 250 mm︱workpiece height 500 mm︱grinding diameter max. 220 mm︱table surface area 600 x 320 mm︱throat 310 mm︱range of angles 12 grad︱grinding spindle slide - vertical movement 110 mm︱stroke speeds 0 - 6 m/min.︱grinding spindle speed bis 50.000 U/min.︱peripheral speed max. 35 m/sec︱capacity ca. 7 kVA︱power capacity 6 kW︱weight of the machine ca. 2 t︱dimensions of the machine ca. 3 x 3 x 3 m︱
          Frequence converter make LANDERT, type SGU 160 - range : 150 - 1330 Hz, feed motion in the table
            x-travel 400 mm
            y-travel 250 mm
            workpiece height 500 mm
            grinding diameter max. 220 mm
            table surface area 600 x 320 mm
            throat 310 mm
            range of angles 12 grad
            grinding spindle slide - vertica. 110 mm
            stroke speeds 0 - 6 m/min.
            grinding spindle speed bis 50.000 U/min.
            peripheral speed max. 35 m/sec
            capacity ca. 7 kVA
            power capacity 6 kW
            weight of the machine ca. 2 t
            dimensions of the machine ca. 3 x 3 x 3 m
            Description :
            Frequence converter make LANDERT, type SGU 160 - range : 150 - 1330 Hz,
            feed motion in the table


        • Feyen Maschinen GmbH
        • Gelleperstr. 10
        • 47809 Krefeld
        • Deutschland

        • Datasheet
          Request / Contact
          used Grinding machines Jig Grinding Machine PERRIN RV 30


          • GWM GmbH
          • Gewerbestr. 2
          • 79639 Grenzach-Wyhlen
          • Deutschland

          • (0049) 7624 9082 0
            07624 9082-206
          • info@gromag.ch
            www.gromag.ch
          #1044-2797 · Jig Grinding Machine

          PERRIN - RV 30 - - 1990 -

          Technical details
          x-travel 400 mm︱y-travel 280 mm︱w-axis 350 mm︱Feed X / Y- axis 6000 mm / min.︱feed rate w-axis 4000 mm/min.︱table surface area 620x315 mm︱table load 0,3 t︱T-slot - width 12 mm︱T-slots 5 Stk.︱spindle speeds (infinitely variable) 10-80.000 U/min︱planetary speed 300 U/min︱spindle stroke 100 mm︱total power requirement 15 KVA︱weight of the machine ca. 3,5 t︱dimensions of the machine ca. 2,45x2,03x2,6 m︱
          cnc control Fanuc 15 M - 8 axis 10 milling heads 3 measuring feeler 1 cabinet with accessories
            x-travel 400 mm
            y-travel 280 mm
            w-axis 350 mm
            Feed X / Y- axis 6000 mm / min.
            feed rate w-axis 4000 mm/min.
            table surface area 620x315 mm
            table load 0,3 t
            T-slot - width 12 mm
            T-slots 5 Stk.
            spindle speeds (infinitely varia. 10-80.000 U/min
            planetary speed 300 U/min
            spindle stroke 100 mm
            total power requirement 15 KVA
            weight of the machine ca. 3,5 t
            dimensions of the machine ca. 2,45x2,03x2,6 m
            Description :
            cnc control Fanuc 15 M - 8 axis
            10 milling heads
            3 measuring feeler
            1 cabinet with accessories


        • GWM GmbH
        • Gewerbestr. 2
        • 79639 Grenzach-Wyhlen
        • Deutschland

        • Datasheet
          Request / Contact
          used Grinding machines Jig Grinding Machine HAUSER S 40 - CNC 314


          • HANS - JÜRGEN GEIGER
          • James-Watt-Str. 12
          • 72555 Metzingen
          • Deutschland

          • (0049)-7123-18040
            (0049)-7123-18384
          • geiger@geiger-germany.com
            www.geiger-germany.com
          #1049-763294 · Jig Grinding Machine

          HAUSER - S 40 - CNC 314 - - 1990 - CNC 314 ELESTA

          Technical details
          x-travel 650 mm︱y-travel 450 mm︱workpiece height mm︱Control CNC 314 ELESTA ︱total power requirement 10 kW︱weight of the machine ca. 4500/7500 kg︱dimensions of the machine ca. m︱
          H A U S E R (Switzerland) CNC Controlled Hi Precision Double Column Jig Grinder Model S 40 – CNC 314 Year approx. 1990 / S/N S402071 ____________________________________________________________ Table size approx. 630 x 770 mm Table load capacity approx. 500 kg Table travel longitudinal max. (X) 650 mm Grinding head slide cross max. (Y) 450 mm Vertical adjustment of cross rail max. (W) 500 mm Grinding spindle stroke max. (Z) 140 mm Stroke number of grinding head (4cycles) 0,5-12 m/min. Vertical distance between Table/grinding spindle 0-585 mm Distance between columns 750 mm Conical grinding max. 16 ° Grinding-Ø bore approx. 230/360 mm 18 spindle speeds depending on spindle motor infinitely variable 4.500-80.000 rpm Fine feeds in X and Y-axis and W-axis 0,5-1.500/3.000/800 mm/min. Planetary speed (C) 5-250 rpm U-axis, radial feed 6 mm Total electrical load approx. 15 kW - 400 V – 50 cycles Weight/Total weight approx. 4.500/7.500 kg Accessories/ Special Features: • CNC Pathcontrol ORIGINAL HAUSER CNC 314 including large monitor and relevant software, for 2 ½ Axis, (=XY +Z-Axis) with teach-in Programming, sub routines, electronic handwheel, for following axis: X=Table length, Y= spindlehead carriage cross, Z= Quill vertical/stroke, C=Planetary Rotation, U=Circular Infeed, w=Vertical adjustment of cross rail. • Z-axis as rapid stroke for shorter processing times, plunge-cut grinding, face grinding,Pre-selection of reversing stops (start movement + teach-in) and of stroke speed (infinitely variable), • U-axis as manual and controlled feed-axis radial, mounted on grinding head, with digital display of feeding size • C-Axis for fast grinding of radii with contour grinding interpolation axes in relation to X,Y • Actually one/maybe two grinding motor available with arbors and collets. 50.000 rpm • Acoustic Grinding Contact Indicater to avoid idle times and also crashes. • Separate Coolant device with bandfilter, switch cabinet, connections and cables, sep. Hydraulic unit with chiller-unit, sep. AIRTEC Oilmistseparator, central lubrication, • Original HAUSER Work Area Protection with sliding doors, Fire distingusher Device, etc. Condition : very good / can be inspected under power Delivery : ex stock – as inspected Payment : net – after completion of contract
            x-travel 650 mm
            y-travel 450 mm
            Control CNC 314 ELESTA
            total power requirement 10 kW
            weight of the machine ca. 4500/7500 kg
            Description :
            H A U S E R (Switzerland)
            CNC Controlled Hi Precision Double Column Jig Grinder
            Model S 40 – CNC 314
            Year approx. 1990 / S/N S402071
            ____________________________________________________________

            Table size approx. 630 x 770 mm
            Table load capacity approx. 500 kg

            Table travel longitudinal max. (X) 650 mm
            Grinding head slide cross max. (Y) 450 mm

            Vertical adjustment of cross rail max. (W) 500 mm
            Grinding spindle stroke max. (Z) 140 mm
            Stroke number of grinding head (4cycles) 0,5-12 m/min.

            Vertical distance between Table/grinding spindle 0-585 mm
            Distance between columns 750 mm
            Conical grinding max. 16 °
            Grinding-Ø bore approx. 230/360 mm

            18 spindle speeds depending on spindle motor
            infinitely variable 4.500-80.000 rpm

            Fine feeds in X and Y-axis and W-axis 0,5-1.500/3.000/800 mm/min.
            Planetary speed (C) 5-250 rpm
            U-axis, radial feed 6 mm
            Total electrical load approx. 15 kW - 400 V – 50 cycles
            Weight/Total weight approx. 4.500/7.500 kg

            Accessories/ Special Features:
            • CNC Pathcontrol ORIGINAL HAUSER CNC 314 including large monitor and
            relevant software, for 2 ½ Axis, (=XY +Z-Axis) with teach-in Programming,
            sub routines, electronic handwheel, for following axis: X=Table length,
            Y= spindlehead carriage cross, Z= Quill vertical/stroke, C=Planetary
            Rotation, U=Circular Infeed, w=Vertical adjustment of cross rail.
            • Z-axis as rapid stroke for shorter processing times, plunge-cut grinding,
            face grinding,Pre-selection of reversing stops (start movement +
            teach-in) and of stroke speed (infinitely variable),
            • U-axis as manual and controlled feed-axis radial, mounted on grinding
            head, with digital display of feeding size
            • C-Axis for fast grinding of radii with contour grinding interpolation
            axes in relation to X,Y
            • Actually one/maybe two grinding motor available with arbors and collets.
            50.000 rpm
            • Acoustic Grinding Contact Indicater to avoid idle times and also crashes.
            • Separate Coolant device with bandfilter, switch cabinet, connections and
            cables, sep.
            Hydraulic unit with chiller-unit, sep. AIRTEC Oilmistseparator, central
            lubrication,
            • Original HAUSER Work Area Protection with sliding doors, Fire
            distingusher Device, etc.

            Condition : very good / can be inspected under power
            Delivery : ex stock – as inspected
            Payment : net – after completion of contract



        • HANS - JÜRGEN GEIGER
        • James-Watt-Str. 12
        • 72555 Metzingen
        • Deutschland

        • Datasheet
          Request / Contact
          used Grinding machines Jig Grinding Machine HAUSER S 3 - CNC 314


          • HANS - JÜRGEN GEIGER
          • James-Watt-Str. 12
          • 72555 Metzingen
          • Deutschland

          • (0049)-7123-18040
            (0049)-7123-18384
          • geiger@geiger-germany.com
            www.geiger-germany.com
          #1049-764539 · Jig Grinding Machine

          HAUSER - S 3 - CNC 314 - - 1990 - CNC 314 ELESTA

          Technical details
          x-travel 400 mm︱y-travel 250 mm︱workpiece height mm︱Control CNC 314 ELESTA ︱total power requirement 15 kW︱weight of the machine ca. 5500 kg︱dimensions of the machine ca. m︱
          H A U S E R (Switzerland) CNC - Controlled High Precision Jig Grinding Machine Model S 3 – CNC 314 Year approx.. 1990 S/N 32086 ____________________________________________________________ Table size, approx. 600 x 380 mm Max. load on table, approx. 300 kg Table travel, longitudinal, max. (X Axis) 400 mm Table travel, cross, max. (Y Axis) 250 mm Vertical adjustment of grinding head max. (W Axis) 450 mm Stroke of grinding spindle, max. (Z Axis) 120 mm Table Longitudinal and cross feeds (X/Y-Axis) 0 – 1.500 mm/min Speed of grinding head stroke 15 – 12.000 mm/min Vertical distance between table and grinding spindle, max. 0 – 485 mm Distance between grinding spindle and column 350 mm Conical grinding, up to max. 16 ° Grinding Ø bore approx. 230 mm Planetary speeds (C-Axis) 5 – 250 rpm U Axis, radial infeed 6 mm Total electrical load, approx. 15 kW - 400 V - 50 Hz Weight/Total weight approx. 4.000/5.500 kg Accessories / Special Features: • CNC Continuous Path Control, Model CNC 314, (ELESTA-POLESTA II) with new monitor,for 4 axes (XYC+U) in 2 1/2 dimension (XY+C) Interpolation with a free and easy programming for Linear and circle interpolation. Direct Input of data on keyboard, also loading data on RS 232 connection. There is also a handwheel control device for setting – up purposes. Manual feed correction during the working cycle possible. • Digital Read-out for the Z-Axis, Z-Axis as high speed stroke, also good for blind holes. • W Axis for vertical positioning of grinding head slide, • U Axis for the infeed cycles during bore grinding, grinds different bore-Ø automatically. • C Axis Feed for the of the Planetary Head, grinds radii and contours • 2 grinding motors HAUSER approx.. 22.500 to 60.000 rpm, with some collets and arbors • Built-on Acoustic Grinding Contact Display Device Model KSV 5. • Separate coolant unit with band filter. * Built-on fire extinguishing system. • Separate switch cabinet and control unit, Separate hydraulic unit with oilchiller, • Central lubrication, service tools, collets and grinding arbors/tools. Condition : Very good - Machine can be inspected under power commissioned by a Specialist. Delivery : Ex stock - as inspected under power. Payment : Net, after conclusion of contract
            x-travel 400 mm
            y-travel 250 mm
            Control CNC 314 ELESTA
            total power requirement 15 kW
            weight of the machine ca. 5500 kg
            Description :
            H A U S E R (Switzerland)
            CNC - Controlled High Precision Jig Grinding Machine
            Model S 3 – CNC 314
            Year approx.. 1990 S/N 32086
            ____________________________________________________________

            Table size, approx. 600 x 380 mm
            Max. load on table, approx. 300 kg

            Table travel, longitudinal, max. (X Axis) 400 mm
            Table travel, cross, max. (Y Axis) 250 mm
            Vertical adjustment of grinding head max. (W Axis) 450 mm
            Stroke of grinding spindle, max. (Z Axis) 120 mm
            Table Longitudinal and cross feeds (X/Y-Axis) 0 – 1.500 mm/min

            Speed of grinding head stroke 15 – 12.000 mm/min

            Vertical distance between table and grinding spindle, max. 0 – 485 mm
            Distance between grinding spindle and column 350 mm
            Conical grinding, up to max. 16 °
            Grinding Ø bore approx. 230 mm

            Planetary speeds (C-Axis) 5 – 250 rpm
            U Axis, radial infeed 6 mm
            Total electrical load, approx. 15 kW - 400 V - 50 Hz
            Weight/Total weight approx. 4.000/5.500 kg

            Accessories / Special Features:
            • CNC Continuous Path Control, Model CNC 314, (ELESTA-POLESTA II) with
            new monitor,for 4 axes (XYC+U) in 2 1/2 dimension (XY+C) Interpolation
            with a free and easy programming for Linear and circle interpolation.
            Direct Input of data on keyboard, also loading data on RS 232 connection.
            There is also a handwheel control device for setting – up purposes.
            Manual feed correction during the working cycle possible.
            • Digital Read-out for the Z-Axis, Z-Axis as high speed stroke, also good
            for blind holes.
            • W Axis for vertical positioning of grinding head slide,
            • U Axis for the infeed cycles during bore grinding, grinds different
            bore-Ø automatically.
            • C Axis Feed for the of the Planetary Head, grinds radii and contours
            • 2 grinding motors HAUSER approx.. 22.500 to 60.000 rpm, with some
            collets and arbors
            • Built-on Acoustic Grinding Contact Display Device Model KSV 5.
            • Separate coolant unit with band filter. * Built-on fire extinguishing
            system.
            • Separate switch cabinet and control unit, Separate hydraulic unit with
            oilchiller,
            • Central lubrication, service tools, collets and grinding arbors/tools.

            Condition : Very good - Machine can be inspected under power
            commissioned by a Specialist.
            Delivery : Ex stock - as inspected under power.
            Payment : Net, after conclusion of contract



        • HANS - JÜRGEN GEIGER
        • James-Watt-Str. 12
        • 72555 Metzingen
        • Deutschland

        • Datasheet
          Request / Contact
          used Grinding machines Jig Grinding Machine HAUSER S 3 - CNC 314


          • HANS - JÜRGEN GEIGER
          • James-Watt-Str. 12
          • 72555 Metzingen
          • Deutschland

          • (0049)-7123-18040
            (0049)-7123-18384
          • geiger@geiger-germany.com
            www.geiger-germany.com
          #1049-744584 · Jig Grinding Machine

          HAUSER - S 3 - CNC 314 - - 1987 - ELESTA CNC 314

          Technical details
          x-travel 400 mm︱y-travel 250 mm︱workpiece height 485 mm︱Control ELESTA CNC 314 ︱total power requirement 10 kW︱weight of the machine ca. 4000 kg︱dimensions of the machine ca. m︱
          H A U S E R CNC - Controlled Vertical Precision Coordinate Grinding Machine Model S 3 – CNC 314 Year 1987 / 1998 partially reconditioned by Swiss-HTT # 0463 ____________________________________________________________ Table size, approx. 600 x 380 mm Max. load on table, approx. 300 kg Table travel, longitudinal, max. (X Axis) 400 mm Table travel, cross, max. (Y Axis) 250 mm Vertical adjustment of grinding head max. (W Axis) 450 mm Stroke of grinding spindle, max. (Z Axis) 120 mm Table Longitudinal and cross feeds (X/Y-Axis) 0 – 1.500 mm/min Speed of grinding head stroke 15 – 7.500 mm/min Vertical distance between table and grinding spindle, max. 0 – 485 mm Distance between grinding spindle and column 350 mm Conical grinding, up to max. 16 ° Grinding Ø bore approx. 230 mm 18 Spindle speeds, depending on spindle motor 4,500 – 80,000 rpm Planetary speeds (C-Axis) 5 – 250 rpm U Axis, radial infeed 6 mm Total electrical load, approx. 10 kW - 380 V - 50 Hz Weight, approx. 4.000 kg Accessories / Special Features: * CNC Continuous Path Control, Model CNC 314, (ELESTA-POLESTA II) with monitor,for 4 axes (XYC+U) in 2 1/2 dimension (XYC) Interpolation with a free programming,the U-Axis is not interpolating it is just an infeed axis. There is also a handwheel controldevice for setting – up purposes. Digital Read-out for the Z-Axis W Axis for vertical positioning of grinding head, Z Axis as high speed stroke axis, also for blind-hole grinding and surface grinding. U Axis for the infeed cycles during bore grinding. C Axis Feed for the of the Planetary Head. * Alltogether 2 grinding turbines 22.500 to 80.000 rpm, with some collets * Built-on Acoustic Grinding Contact Display Device Model KSV 5. * Separate coolant unit with band filter. * Built-on fire extinguishing system. Separate switch and control cabinet. Covered working area. Separate hydraulic unit * Central lubrication, service tools. Condition : Very good - Machine can be inspected under power. Delivery : Ex stock - as inspected under power. Payment : Net, after conclusion of contract
            x-travel 400 mm
            y-travel 250 mm
            workpiece height 485 mm
            Control ELESTA CNC 314
            total power requirement 10 kW
            weight of the machine ca. 4000 kg
            Description :
            H A U S E R
            CNC - Controlled Vertical Precision Coordinate Grinding Machine
            Model S 3 – CNC 314
            Year 1987 / 1998 partially reconditioned by Swiss-HTT # 0463
            ____________________________________________________________

            Table size, approx. 600 x 380 mm
            Max. load on table, approx. 300 kg

            Table travel, longitudinal, max. (X Axis) 400 mm
            Table travel, cross, max. (Y Axis) 250 mm
            Vertical adjustment of grinding head max. (W Axis) 450 mm
            Stroke of grinding spindle, max. (Z Axis) 120 mm
            Table Longitudinal and cross feeds (X/Y-Axis) 0 – 1.500 mm/min

            Speed of grinding head stroke 15 – 7.500 mm/min

            Vertical distance between table and grinding spindle, max. 0 – 485 mm
            Distance between grinding spindle and column 350 mm
            Conical grinding, up to max. 16 °
            Grinding Ø bore approx. 230 mm

            18 Spindle speeds, depending on spindle motor 4,500 – 80,000 rpm

            Planetary speeds (C-Axis) 5 – 250 rpm
            U Axis, radial infeed 6 mm

            Total electrical load, approx. 10 kW - 380 V - 50 Hz
            Weight, approx. 4.000 kg

            Accessories / Special Features:
            * CNC Continuous Path Control, Model CNC 314, (ELESTA-POLESTA II) with
            monitor,for 4 axes (XYC+U) in 2 1/2 dimension (XYC) Interpolation with
            a free programming,the U-Axis is not interpolating it is just an infeed
            axis. There is also a handwheel controldevice for setting – up purposes. Digital Read-out for the Z-Axis
            W Axis for vertical positioning of grinding head,
            Z Axis as high speed stroke axis, also for blind-hole grinding and
            surface grinding.
            U Axis for the infeed cycles during bore grinding.
            C Axis Feed for the of the Planetary Head.
            * Alltogether 2 grinding turbines 22.500 to 80.000 rpm, with some collets
            * Built-on Acoustic Grinding Contact Display Device Model KSV 5.
            * Separate coolant unit with band filter. * Built-on fire extinguishing
            system.
            Separate switch and control cabinet. Covered working area.
            Separate hydraulic unit
            * Central lubrication, service tools.

            Condition : Very good - Machine can be inspected under power.
            Delivery : Ex stock - as inspected under power.
            Payment : Net, after conclusion of contract




        • HANS - JÜRGEN GEIGER
        • James-Watt-Str. 12
        • 72555 Metzingen
        • Deutschland

        • Datasheet
          Request / Contact
          used Grinding machines Jig Grinding Machine HAUSER S3-CNC 314


          • INTER-PLAST
          • 42-209 Czestochowa

          • +48 343 627 904
            +48 785 198 061
          • iweta@inter-plast.com.pl
            www.inter-plast.com.pl
          #1129-206 · Jig Grinding Machine

          HAUSER - S3-CNC 314 - - 1985 -

          Technical details
          x-travel 400 mm︱y-travel 250 mm︱workpiece height mm︱total power requirement kW︱weight of the machine ca. 3 t︱dimensions of the machine ca. m︱
            x-travel 400 mm
            y-travel 250 mm
            weight of the machine ca. 3 t


        • INTER-PLAST
        • 42-209 Czestochowa

        • Datasheet
          Request / Contact
          used Grinding machines Jig Grinding Machine HAUSER S 40 - CNC 311


          • HANS - JÜRGEN GEIGER
          • James-Watt-Str. 12
          • 72555 Metzingen
          • Deutschland

          • (0049)-7123-18040
            (0049)-7123-18384
          • geiger@geiger-germany.com
            www.geiger-germany.com
          #1049-753396 · Jig Grinding Machine

          HAUSER - S 40 - CNC 311 - - 1981 - ADCOS CNC 400

          Technical details
          x-travel 650 mm︱y-travel 450 mm︱workpiece height 585 mm︱Control ADCOS CNC 400 ︱total power requirement 15 kW︱weight of the machine ca. 5000 kg︱dimensions of the machine ca. m︱
          H A U S E R (Switzerland) CNC Controlled Hi Precision Double Column Jig Grinder Model S 40 – CNC 311 / ADCOS 400 CNC Year 1981 / CNC modernized in 2008 # 0126 _____________________________________________________________________ Table size approx. 630 x 770 mm Table load capacity approx. 500 kg Table travel longitudinal max. (X) 650 mm Grinding head slide cross max. (Y) 450 mm Vertical adjustment of cross rail max. (W) 500 mm Grinding spindle stroke max. (Z) 140 mm Stroke number of grinding head (4cycles) 0,5-12 m/min. Vertical distance between Table/grinding spindle 0-585 mm Distance between columns 750 mm Conical grinding max. 16 ° Grinding-Ø bore approx. 230/360 mm 18 spindle speeds depending on spindle motor infinitely variable 4.500-80.000 rpm Fine feeds in X and Y-axis and W-axis 0,5-1.500/3.000/800 mm/min. Planetary speed (C) 5-250 rpm U-axis, radial feed 6 mm Total electrical load approx. 15 kW - 400 V – 50 cycles Weight approx. 4.500 kg Accessories/ Special Features: • CNC Pathcontrol replaced and modernized into a ADCOS Control Model CNC 400, (German Manufacturer) including large monitor and relevant software, electronic handwheel, for following axis: X=Table length, Y= spindlehead carriage cross, Z= Quill vertical/stroke, C=Quill-Rotation,U=Circular Infeed, w=Vertical adjustment of cross rail. • Z-axis as rapid stroke for shorter processing times, plunge-cut grinding, face grinding, Pre-selection of reversing stops (start movement + teach-in) and of stroke speed (infinitely variable), • U-axis as manual and controlled feed-axis radial, mounted on grinding head, with electr.display of feeding size 1 Grinding motor mounted on spindle, maybe up to a spindle speed of 30.000 rpm, • Mounted accustic grinding contact-display device KSV 5 • Separate standing coolant facility, switching- and control cabinet, separate hydraulic system, central lubrication system, dust suction, etc Condition : very good / can be inspected under power Delivery : ex stock – as inspected Payment : net – after completion of contract
            x-travel 650 mm
            y-travel 450 mm
            workpiece height 585 mm
            Control ADCOS CNC 400
            total power requirement 15 kW
            weight of the machine ca. 5000 kg
            Description :
            H A U S E R (Switzerland)
            CNC Controlled Hi Precision Double Column Jig Grinder
            Model S 40 – CNC 311 / ADCOS 400 CNC
            Year 1981 / CNC modernized in 2008 # 0126
            _____________________________________________________________________

            Table size approx. 630 x 770 mm
            Table load capacity approx. 500 kg

            Table travel longitudinal max. (X) 650 mm
            Grinding head slide cross max. (Y) 450 mm

            Vertical adjustment of cross rail max. (W) 500 mm
            Grinding spindle stroke max. (Z) 140 mm
            Stroke number of grinding head (4cycles) 0,5-12 m/min.

            Vertical distance between
            Table/grinding spindle 0-585 mm
            Distance between columns 750 mm
            Conical grinding max. 16 °
            Grinding-Ø bore approx. 230/360 mm

            18 spindle speeds depending on spindle motor
            infinitely variable 4.500-80.000 rpm

            Fine feeds in X and Y-axis and W-axis 0,5-1.500/3.000/800 mm/min.
            Planetary speed (C) 5-250 rpm
            U-axis, radial feed 6 mm

            Total electrical load approx. 15 kW - 400 V – 50 cycles
            Weight approx. 4.500 kg

            Accessories/ Special Features:
            • CNC Pathcontrol replaced and modernized into a ADCOS Control
            Model CNC 400, (German Manufacturer) including large monitor and
            relevant software, electronic handwheel, for following axis:
            X=Table length, Y= spindlehead carriage cross, Z= Quill vertical/stroke,
            C=Quill-Rotation,U=Circular Infeed, w=Vertical adjustment of cross rail.
            • Z-axis as rapid stroke for shorter processing times, plunge-cut grinding, face grinding,
            Pre-selection of reversing stops (start movement + teach-in) and of
            stroke speed (infinitely variable),
            • U-axis as manual and controlled feed-axis radial, mounted on grinding
            head, with electr.display of feeding size
            1 Grinding motor mounted on spindle, maybe up to a spindle speed of
            30.000 rpm,
            • Mounted accustic grinding contact-display device KSV 5
            • Separate standing coolant facility, switching- and control cabinet,
            separate hydraulic system, central lubrication system, dust suction, etc

            Condition : very good / can be inspected under power
            Delivery : ex stock – as inspected
            Payment : net – after completion of contract



        • HANS - JÜRGEN GEIGER
        • James-Watt-Str. 12
        • 72555 Metzingen
        • Deutschland

        • Datasheet
          Request / Contact
          used Grinding machines Jig Grinding Machine HAUSER  3SM  DR


          • INDUBA GmbH
          • Tuttlinger Straße 51
          • 78628 Rottweil
          • Deutschland

          • 0741 21787
            0741 13562
          • info@induba.de
            www.induba.de
          #2002-10022 · Jig Grinding Machine

          HAUSER - 3SM DR - - 1977 -

          Technical details
          x-travel mm︱y-travel mm︱


        • INDUBA GmbH
        • Tuttlinger Straße 51
        • 78628 Rottweil
        • Deutschland

        • Datasheet
          Request / Contact
          used Grinding machines Jig Grinding Machine Moore No. 2c


          • Plum & Partner Werkzeugmaschinen GmbH
          • Winkelstraße 32
          • 32257 Bünde
          • Deutschland

          • +49 05223 574444
            +49 5223188330
          • info@plum-maschinen.de
            www.plum-maschinen.de
          #1082-12165 · Jig Grinding Machine

          Moore - No. 2c - - 1975 -

          Technical details
          x-travel 420 mm︱y-travel 270 mm︱workpiece height - mm︱table-size 254 x 482 mm︱throat 254 / 318 mm︱grinding spindle speeds 12. - 60.000 U/min.︱spindle stroke 92 mm︱spindle turning speed range 90, 136, 184, 280 U/min︱number of strokes adjustable 2 - 120 Hübe bei 51 mm︱0 1,25 µm bei 30 mm︱Required air-pressure 7 bar︱weight of the machine ca. 1430 kg︱dimensions of the machine ca. 1,45 x 1,2 x 2,4 m︱Electric 380 Volt ︱Tool cupboard 2 ︱Rotary table Moore 254 mm︱Grinding head with air turbine 4 x
          The Moore gauge grinding machine is equipped with grinding heads that are driven by an air turbine. There are 4 grinding heads available. Pneumohydraulically controlled up and down stroke movement, infinitely adjustable by valve 2-120 strokes at 51 mm travel, direct reading of the measuring spindles with vernier 0.001 mm, contour grinding, cone grinding, groove grinding, eccentric adjustment of the grinding spindle. Machine body made of Meehanit cast, strong internal ribbing, cross slide fully supported - no overhang of the table, heating in the main spindle housing. Machine dealer with own stock of 2500 m².
            x-travel 420 mm
            y-travel 270 mm
            workpiece height - mm
            table-size 254 x 482 mm
            throat 254 / 318 mm
            grinding spindle speeds 12. - 60.000 U/min.
            spindle stroke 92 mm
            spindle turning speed range 90, 136, 184, 280 U/min
            number of strokes adjustable 2 - 120 Hübe bei 51 mm
            0 1,25 µm bei 30 mm
            Required air-pressure 7 bar
            weight of the machine ca. 1430 kg
            dimensions of the machine ca. 1,45 x 1,2 x 2,4 m
            Tool cupboard 2
            Rotary table Moore 254 mm
            Grinding head with air turbine 4 x
            Description :
            The Moore gauge grinding machine is equipped with grinding heads that are
            driven by an air turbine. There are 4 grinding heads available.
            Pneumohydraulically controlled up and down stroke movement, infinitely
            adjustable by valve 2-120 strokes at 51 mm travel, direct reading of the
            measuring spindles with vernier 0.001 mm, contour grinding, cone grinding,
            groove grinding, eccentric adjustment of the grinding spindle. Machine body
            made of Meehanit cast, strong internal ribbing, cross slide fully supported -
            no overhang of the table, heating in the main spindle housing.
            Machine dealer with own stock of 2500 m².


        • Plum & Partner Werkzeugmaschinen GmbH
        • Winkelstraße 32
        • 32257 Bünde
        • Deutschland

        • Datasheet
          Request / Contact
          used Grinding machines Jig Grinding Machine HAUSER 5 SM


          • GWM GmbH
          • Gewerbestr. 2
          • 79639 Grenzach-Wyhlen
          • Deutschland

          • (0049) 7624 9082 0
            07624 9082-206
          • info@gromag.ch
            www.gromag.ch
          #1044-2945 · Jig Grinding Machine

          HAUSER - 5 SM - - 1971 - Digitalanzeige

          Technical details
          x-travel 700 mm︱y-travel 500 mm︱workpiece height 675 mm︱table surface area 900 x 770 mm︱column daylight 840 mm︱turning speed range - grinding spindle 9 - 45.000 U/min︱total power requirement 6,5 kW︱weight of the machine ca. 5 t︱dimensions of the machine ca. 3,6 x 5 m︱control Digitalanzeige
            x-travel 700 mm
            y-travel 500 mm
            workpiece height 675 mm
            table surface area 900 x 770 mm
            column daylight 840 mm
            turning speed range - grinding s. 9 - 45.000 U/min
            total power requirement 6,5 kW
            weight of the machine ca. 5 t
            dimensions of the machine ca. 3,6 x 5 m
            control Digitalanzeige


        • GWM GmbH
        • Gewerbestr. 2
        • 79639 Grenzach-Wyhlen
        • Deutschland

        • Datasheet
          Request / Contact
          used Grinding machines Jig Grinding Machine MOORE Nr. 3


          • IMZ Maschinen Vertriebs GmbH
          • Marie-Curie-Straße 19
          • 73529 Schwäbisch Gmünd
          • Deutschland

          • 0049 (0) 7171 987130
            0049 (0) 7171 9871329
          • info@imz.de
            www.imz.de
          #1075-6633 · Jig Grinding Machine

          MOORE - Nr. 3 - - 1969 -

          Technical details
          x-travel 280 mm︱y-travel 460 mm︱table-size 280x610 mm︱table movement 280x460 mm︱spindle turning speed range 40-2500 U/min︱grinding range 5,0-125 mm︱spindle diameter mm︱grinding depth 0,4-5 mm︱stroke length max. 92 mm︱total power requirement kW︱weight of the machine ca. 1,8 t︱dimensions of the machine ca. 2x1,5x2,8 m︱
          Single Column Jig Grinder, conventional, DRO, accessories
            x-travel 280 mm
            y-travel 460 mm
            table-size 280x610 mm
            table movement 280x460 mm
            spindle turning speed range 40-2500 U/min
            grinding range 5,0-125 mm
            grinding depth 0,4-5 mm
            stroke length max. 92 mm
            weight of the machine ca. 1,8 t
            dimensions of the machine ca. 2x1,5x2,8 m
            Description :
            Single Column Jig Grinder, conventional, DRO, accessories


        • IMZ Maschinen Vertriebs GmbH
        • Marie-Curie-Straße 19
        • 73529 Schwäbisch Gmünd
        • Deutschland

        • Datasheet
          Request / Contact
          used Grinding machines Jig Grinding Machine HAUSER 3 SMO


          • Schiess Moweg GmbH
          • Egerstraße 73-75
          • 41236 Mönchengladbach
          • Deutschland

          • +49 (0) 2166 61530
            +49 (0)2166 615315
          • info@schiess-moweg.de
            www.schiess-moweg.de
          #1034-02468 · Jig Grinding Machine

          HAUSER - 3 SMO - - 1968 -

          Technical details
          x-travel 400 mm︱y-travel 250 mm︱workpiece height 500 mm︱grinding diameter 220 mm︱table surface area 600 x 320 mm︱throat 310 mm︱range of angles 12 °︱grinding wheel stroke - vertical 110 mm︱stroke speeds 0 - 6 m/min︱grinding spindle speed bis 50000 U/min︱peripheral speed max. 35 m/sec︱capacity ca. 7 kVA︱power capacity 6 kW︱weight of the machine ca. 2 t︱dimensions of the machine ca. 3 x 3 x 3 m︱
          rotary table d = 300 mm frequency changer
            x-travel 400 mm
            y-travel 250 mm
            workpiece height 500 mm
            grinding diameter 220 mm
            table surface area 600 x 320 mm
            throat 310 mm
            range of angles 12 °
            grinding wheel stroke - vertical 110 mm
            stroke speeds 0 - 6 m/min
            grinding spindle speed bis 50000 U/min
            peripheral speed max. 35 m/sec
            capacity ca. 7 kVA
            power capacity 6 kW
            weight of the machine ca. 2 t
            dimensions of the machine ca. 3 x 3 x 3 m
            Description :
            rotary table d = 300 mm
            frequency changer


        • Schiess Moweg GmbH
        • Egerstraße 73-75
        • 41236 Mönchengladbach
        • Deutschland

        • Datasheet
          Request / Contact
          used Grinding machines Jig Grinding Machine HAUSER HAUSER 3 S M


          • Aleman Machines e.K.
          • Am Mühlweg 1
          • 73466 Lauchheim
          • Deutschland

          • +49 (0)7363-6098 20
            +49 (0)7363-6098 19
          • info@aleman-machines.com
            www.aleman-machines.com
          #1120-1000135 · Jig Grinding Machine

          HAUSER - HAUSER 3 S M - - -

          Technical details
          x-travel 400 mm︱y-travel 250 mm︱workpiece height 500 mm︱table surface area 600 x 320 mm︱total power requirement 7 kVA︱weight of the machine ca. 2 t︱
            x-travel 400 mm
            y-travel 250 mm
            workpiece height 500 mm
            table surface area 600 x 320 mm
            total power requirement 7 kVA
            weight of the machine ca. 2 t


        • Aleman Machines e.K.
        • Am Mühlweg 1
        • 73466 Lauchheim
        • Deutschland

        • Datasheet
          Request / Contact
          used Grinding machines Jig Grinding Machine HAUSER S 3 - 111


          • Emuk Maschinenhandel GmbH
          • Siemensstrasse 24
          • 76316 Malsch
          • Deutschland

          • +49 (0) 7246 943161
          • info@emuk.info
            www.emuk.info
          #2070-E22046 · Jig Grinding Machine

          HAUSER - S 3 - 111 - - - Hauser

          Technical details
          x-travel 400 mm︱y-travel 250 mm︱workpiece height 480 mm︱spindle diameter mm︱Control Hauser ︱clamping table 600 x 380 mm︱table surface area 595 x 320 mm︱stroke 500 mm︱spindle turning speed - stepless 9000 - 80000 U/min︱total power requirement 8,5 kW︱weight of the machine ca. 3,2 t︱dimensions of the machine ca. 3,0 x 3,0 x 3,3 m︱
          Elesta Visulesta II digital readout, many accessories!
            x-travel 400 mm
            y-travel 250 mm
            workpiece height 480 mm
            Control Hauser
            clamping table 600 x 380 mm
            table surface area 595 x 320 mm
            stroke 500 mm
            spindle turning speed - stepless 9000 - 80000 U/min
            total power requirement 8,5 kW
            weight of the machine ca. 3,2 t
            dimensions of the machine ca. 3,0 x 3,0 x 3,3 m
            Description :
            Elesta Visulesta II digital readout, many accessories!


        • Emuk Maschinenhandel GmbH
        • Siemensstrasse 24
        • 76316 Malsch
        • Deutschland

        • Datasheet
          Request / Contact
          •   
          •   
          • 1  
          •   
          •   


          Find your next jig grinding machine at LagerMaschinen
          Accuracy at its finest: your new jig grinding machine

          Jig grinding is the most accurate type of cutting employed when intricacy and detail are the priorities. A jig grinding machine is often used in die cutting and tool making where small accurate cuts are required. The adjustable speed of the spindles used for cutting make a jig grinder a very versatile machine with a large level of control maintained by the operator. If you're looking for a used jig grinding machine check out the selection at LagerMaschinen.

          A jig grinding machine ensures precision and quality

          The wide variety of machinery available on the market today makes it easy to find the best equipment to suit your individual business needs. For those involved in precision cutting a jig grinding machine is one of the most crucial pieces of machinery. You can find jig grinders in a wide variety of sizes with variable cutting speeds both manual and CNC (computer numerically controlled). Buying a used jig grinding machine is a practical solution for your budget and your peace of mind.

          Find a budget-friendly used machine by visiting LagerMaschinen!

          You don't have to sacrifice quality in favour of affordability when shopping for used machines. LagerMaschinen is your one-stop shopping destination for the largest selection of used industrial machinery. Find equipment like a jig grinding machine and much more on the user-friendly interface. Shop by location price or specific needs to ensure you find the best fit you and your business. No matter what you're in the market for you'll enjoy a hassle-free experience using LagerMaschinen.

          TOP Manufacturer:

          HAUSER - MOORE - PERRIN - WMW-MIKROMAT -