Bevel Gear Generator - Spiral

max. wheel diameter 600 mm︱gear width 110 mm︱max. module 13 ︱pitch angle +/- 45 °︱number of teeth 8 - ︱control Siemens 840D powerline ︱feed: ︱vertical 0,01 - 10 mm/ot︱horizontal 0,01 - 10 mm/ot︱tangential adjustment 0,01 - 5 mm/ot︱rapid traverse: ︱vertical 1500 mm/min︱radial adjustment 2000 mm/min︱tangential adjustment 1000 mm/min︱milling spindle speeds (infinitely variable) 450 U/min︱distance table / middle of spindle 210 / 700 mm︱total power requirement 33 kW︱weight of the machine ca. 12 t︱dimensions of the machine ca. 4,4 x 2,5 x 2,45 m︱

---

6-axis spiral bevel Gear Generator for machining spiral and hypoid bevel gears equipped with: - CNC control Siemens Sinumerik 840D powerline - Shifting (transverse displacement of the tool) - automatic cycles - Operating cycles: --- 1st gearing prime number, slope, oblique to the run and continuous correction --- 2nd milling mating --- 3rd square cycle and cycle L --- 4. Milling 1 to 6 Machine has only made trial runs in a Show Room and has never been used in production. Approx 200 Power On Hours The machine has been dismantled and stored. Original price about 1.5 million € Machine makes standard quality Din 7

max. wheel diameter 500 mm︱gear width 200 mm︱max. module 5 ︱min. module 0.5 ︱Control Siemens 840 D ︱total power requirement 10 kW︱weight of the machine ca. 8 t︱dimensions of the machine ca. 3 x 4 x 2 m︱

---

max. wheel diameter 275 mm︱gear width 150 mm︱max. module 6 ︱min. module 1,5 ︱total power requirement 62 kW︱weight of the machine ca. 12 t︱dimensions of the machine ca. 4,7x4,4x2,45 m︱

---

max. wheel diameter mm gear width mm max. module 6 min. module 1.5 max. workpiece diameter 275 mm tooth width max. 5.5 mm spiral angle 0 - 60 ° number of teeth 5 - 120 transmission ratio min. 1:1 transmission ratio max. 1:10 milling drive motor 20 kW workpiece drive 14.5 kW total power requirement 62 kVA weight of the machine ca. 12 t dimensions of the machine ca. 4,7 x 4,387 x 2,45 m Tool spindle (D-axis) - workpiece spindle speed (infinitely) 60 to 350 [...] Tool positioning axis (E-axis) - swivel range 0 to 360° - swivel speed max. 19.5°/s Workpiece spindle (B-axis) - mounting diameter outer cone (1: 4) 140 mm - standard internal cone (1:20) 99.218 mm - workpiece spindle speed max. 300 [...] - workpiece spindle passage 90 mm Workpiece positioning axis (Y-axis) - travel 870 mm - speed max. 4.5 m/min Roller rotation axis (A-axis) - swivel range 315° - swivel speed max. 40°/s Axis intersection (Z-axis) - travel range max. +/- 50 mm - speed max. 0.657 m/min Workpiece swivel axis (C-axis) - swivel range -8.5 to 98° - swivel speed max. 21.5 °/s Milling depth axis (X-axis) - travel from -25 to 640 mm - max. speed 6 m/min Machinen distance (V-axis) - travel 150 mm - speed max. 1.6 m/min

max. wheel diameter 275 mm︱gear width 150 mm︱max. module 6 ︱min. module 1.5 ︱max. workpiece diameter 275 mm︱tooth width max. 5.5 mm︱spiral angle 0 - 60 °︱number of teeth 5 - 120 ︱transmission ratio min. 1:1 ︱transmission ratio max. 1:10 ︱milling drive motor 20 kW︱workpiece drive 14.5 kW︱total power requirement 62 kVA︱weight of the machine ca. 12 t︱dimensions of the machine ca. 4,7 x 4,387 x 2,45 m︱

---

Tool spindle (D-axis) - workpiece spindle speed (infinitely) 60 to 350 r.p.m. Tool positioning axis (E-axis) - swivel range 0 to 360° - swivel speed max. 19.5°/s Workpiece spindle (B-axis) - mounting diameter outer cone (1: 4) 140 mm - standard internal cone (1:20) 99.218 mm - workpiece spindle speed max. 300 r.p.m. - workpiece spindle passage 90 mm Workpiece positioning axis (Y-axis) - travel 870 mm - speed max. 4.5 m/min Roller rotation axis (A-axis) - swivel range 315° - swivel speed max. 40°/s Axis intersection (Z-axis) - travel range max. +/- 50 mm - speed max. 0.657 m/min Workpiece swivel axis (C-axis) - swivel range -8.5 to 98° - swivel speed max. 21.5 °/s Milling depth axis (X-axis) - travel from -25 to 640 mm - max. speed 6 m/min Machinen distance (V-axis) - travel 150 mm - speed max. 1.6 m/min - 13 milling cutters included -

workpiece diameter 540 mm︱tooth width 78 mm︱reale modul 12 ︱min. module ︱cone distance 270 mm︱no. of teeth 6 - 100 ︱taper setting angle of the workpiece column -10 / +90 °︱axis adjustment +/- 80 mm︱blade cutter head diameter 6 - 16 "︱radial adjust.(inserted tooth milling cutter) 225 mm︱Zahntiefe 34 mm︱apex to spindle nose 80 - 450 mm︱inclination Frässpindel 0 - 34 °︱milling head speed 56 - 280 U/min︱electrics - voltage/frequency 380 / 50 V/Hz︱dimensions of the machine ca. 3,4 x 2 x 2,3 m︱total power requirement 16 kW︱weight of the machine ca. 12 t︱

---

ARCOID machine - version with universal milling head with tiltable milling spindle equipped with : - Change gears - chip conveyor