European network of stockholding machinery dealers

Category:
    Manufacturer:
      Machines:
        Trader:

          Table Type Boring and Milling Machine

          Machinelist: Table Type Boring and Milling Machine


          Table Type Boring and Milling Machine

          used Boring mills / Machining Centers / Drilling machines Table Type Boring and Milling Machine PEGARD AF9


          • Harry Vraets Machinery B.V.
          • Gezellenstraat 2
          • 3861RD Nijkerk
          • Niederlande

          • +31 (0)332452145
          • info@vraetsmachinery.com
            www.vraetsmachinery.com
          #2039-12617AM · Table Type Boring and Milling Machine

          PEGARD - AF9 - - unbekannt -

          Technical details
          spindle diameter 90 mm︱x-travel 1600 mm︱y-travel 1400 mm︱z-travel 900 mm︱table surface area 1200 x 900 mm︱taper ISO 40 ︱spindle speed: 25 - 1400 ︱total power requirement 16 kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱
            spindle diameter 90 mm
            x-travel 1600 mm
            y-travel 1400 mm
            z-travel 900 mm
            table surface area 1200 x 900 mm
            taper ISO 40
            spindle speed: 25 - 1400
            total power requirement 16 kW
          Datasheet
          Request / Contact
          used Boring mills / Machining Centers / Drilling machines Table Type Boring and Milling Machine PAMA AL 27


          • Harry Vraets Machinery B.V.
          • Gezellenstraat 2
          • 3861RD Nijkerk
          • Niederlande

          • +31 (0)332452145
          • info@vraetsmachinery.com
            www.vraetsmachinery.com
          #2039-11493A · Table Type Boring and Milling Machine

          PAMA - AL 27 - - unbekannt -

          Technical details
          spindle diameter 127 mm︱x-travel 2500 mm︱y-travel 1500 mm︱W-axis (spindle longitudinal) 900 mm︱z-travel 1500 mm︱Table dimensions 1279x1520 mm︱turning speeds 8-950 U/min︱Tailstock mm︱ ︱total power requirement kW︱weight of the machine ca. . t︱dimensions of the machine ca. . m︱
            spindle diameter 127 mm
            x-travel 2500 mm
            y-travel 1500 mm
            W-axis (spindle longitudinal) 900 mm
            z-travel 1500 mm
            Table dimensions 1279x1520 mm
            turning speeds 8-950 U/min
            weight of the machine ca. . t
            dimensions of the machine ca. . m
          Datasheet
          Request / Contact
          used Boring mills / Machining Centers / Drilling machines Table Type Boring and Milling Machine TOSHIBA BTD-110R16


          • Harry Vraets Machinery B.V.
          • Gezellenstraat 2
          • 3861RD Nijkerk
          • Niederlande

          • +31 (0)332452145
          • info@vraetsmachinery.com
            www.vraetsmachinery.com
          #2039-12669A · Table Type Boring and Milling Machine

          TOSHIBA - BTD-110R16 - - unbekannt - TOSNUC 7-3

          Technical details
          spindle diameter 110 mm︱x-travel 2000 mm︱y-travel 1500 mm︱z-travel 1450 mm︱table surface area 1400 x 1600 mm︱taper ISO 50 ︱spindle speed: 2 - 2500 ︱Control TOSNUC 7-3 ︱total power requirement 22 kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱
            spindle diameter 110 mm
            x-travel 2000 mm
            y-travel 1500 mm
            z-travel 1450 mm
            table surface area 1400 x 1600 mm
            taper ISO 50
            spindle speed: 2 - 2500
            Control TOSNUC 7-3
            total power requirement 22 kW
          Datasheet
          Request / Contact
          used Boring mills / Machining Centers / Drilling machines Table Type Boring and Milling Machine TOS WH 10 NC


          • Markus Hirsch GmbH
          • Niersweg 84
          • 47877 Willich
          • Deutschland

          • +49 2156 49894 12
            +49 2156 49894 10
          • hirsch@hirsch-maschinen.de
            www.hirsch-maschinen.de
          #1077-V00154 · Table Type Boring and Milling Machine

          TOS - WH 10 NC - - unbekannt - Heidenhain TNC 135

          Technical details
          spindle diameter 100 mm︱x-travel 1250 mm︱y-travel 900 mm︱z-travel 1000 mm︱w-axis 630 mm︱table load 3 t︱Table dimensions 1000x1120 mm︱voltage 380 V︱taper ISO 50 P.D.B. ︱control Heidenhain TNC 135 ︱total power requirement 15 kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱
            spindle diameter 100 mm
            x-travel 1250 mm
            y-travel 900 mm
            z-travel 1000 mm
            w-axis 630 mm
            table load 3 t
            Table dimensions 1000x1120 mm
            voltage 380 V
            taper ISO 50 P.D.B.
            control Heidenhain TNC 135
            total power requirement 15 kW
          Datasheet
          Request / Contact
          used Boring mills / Machining Centers / Drilling machines Table Type Boring and Milling Machine WOTAN B 75


          • Heinz Sanders GmbH
          • Fresenburger Weg 4
          • 49779 Niederlangen
          • Deutschland

          • +49 (0) 5939 9406 40
            +49 (0) 5939 9406 50
          • maschinen@heinz-sanders.de
            www.heinz-sanders.de
          #1125-7313 · Table Type Boring and Milling Machine

          WOTAN - B 75 - - unbekannt -

          Technical details
          spindle diameter 75 mm︱x-travel 800 mm︱y-travel 800 mm︱spindle taper ISO 50 ︱faceplate diameter 420 mm︱turning dia. over face-slide max. 560 mm︱table surface area 800 x 1000 mm︱turning speeds 12,5 - 1000 U/min︱swivelling range 360 Grad︱total power requirement 9 kW︱weight of the machine ca. 6 t︱dimensions of the machine ca. 3,8 x 1,8 x 2,5 m︱
            spindle diameter 75 mm
            x-travel 800 mm
            y-travel 800 mm
            spindle taper ISO 50
            faceplate diameter 420 mm
            turning dia. over face-slide max. 560 mm
            table surface area 800 x 1000 mm
            turning speeds 12,5 - 1000 U/min
            swivelling range 360 Grad
            total power requirement 9 kW
            weight of the machine ca. 6 t
            dimensions of the machine ca. 3,8 x 1,8 x 2,5 m
            Description :

          Datasheet
          Request / Contact
          used Boring mills / Machining Centers / Drilling machines Table Type Boring and Milling Machine JUARISTI MDR 90


          • Heinz Sanders GmbH
          • Fresenburger Weg 4
          • 49779 Niederlangen
          • Deutschland

          • +49 (0) 5939 9406 40
            +49 (0) 5939 9406 50
          • maschinen@heinz-sanders.de
            www.heinz-sanders.de
          #1125-5683 · Table Type Boring and Milling Machine

          JUARISTI - MDR 90 - - unbekannt -

          Technical details
          spindle diameter 90 mm︱x-travel 1700 mm︱y-travel 1250 mm︱drilling depth in one stroke 720 mm︱spindle taper MK 5 ︱number of spindle speeds 16 - 1000 U/min︱table surface area 1420 x 1050 mm︱table rotating 360 °︱voltage 380 V︱spindle drive 15 kW︱feed 0,03 - 12 mm/U︱rapid traverse 1,8 m/min︱total power requirement 15 kW︱weight of the machine ca. 8,5 t︱
            spindle diameter 90 mm
            x-travel 1700 mm
            y-travel 1250 mm
            drilling depth in one stroke 720 mm
            spindle taper MK 5
            number of spindle speeds 16 - 1000 U/min
            table surface area 1420 x 1050 mm
            table rotating 360 °
            voltage 380 V
            spindle drive 15 kW
            feed 0,03 - 12 mm/U
            rapid traverse 1,8 m/min
            total power requirement 15 kW
            weight of the machine ca. 8,5 t
          Datasheet
          Request / Contact
          used Boring mills / Machining Centers / Drilling machines Table Type Boring and Milling Machine PBR AF90


          • Intermach BV
          • lange voor 71
          • 8316BC Marknesse
          • Niederlande

          • +31 (0)527 201323
          • info@intermach.nl
            www.intermach.nl
          #2050-1210033 · Table Type Boring and Milling Machine

          PBR - AF90 - - NB -

          Technical details
          spindle diameter 90 mm︱x-travel 1475 mm︱y-travel 1200 mm︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱
          Brand: PBR Type: AF-90 Used machine X: 1.475 mm Y: 1.200 mm Table length: 1.200 mm Table width: 950 mm Intake: ISO 40 Speed: 12,5 - 1.250 RPM Equipped with foldable level rotary support diam. 500 mm Digital readout on the X, Y, Z axis, Type of track With control console on swivel arm With lunette With universal milling head Optical viewer for ruler
            spindle diameter 90 mm
            x-travel 1475 mm
            y-travel 1200 mm
            Description :
            Brand: PBR
            Type: AF-90
            Used machine




            X: 1.475 mm
            Y: 1.200 mm
            Table length: 1.200 mm
            Table width: 950 mm
            Intake: ISO 40
            Speed: 12,5 - 1.250 RPM

            Equipped with foldable level rotary support diam. 500 mm
            Digital readout on the X, Y, Z axis, Type of track
            With control console on swivel arm
            With lunette
            With universal milling head
            Optical viewer for ruler
          Datasheet
          Request / Contact
          used Boring mills / Machining Centers / Drilling machines Table Type Boring and Milling Machine COLLET & ENGELHARDT BFfb 100 NU


          • GWM GmbH
          • Gewerbestr. 2
          • 79639 Grenzach-Wyhlen
          • Deutschland

          • (0049) 7624 9082 0
            07624 9082-206
          • info@gromag.ch
            www.gromag.ch
          #1044-3119 · Table Type Boring and Milling Machine

          COLLET & ENGELHARDT - BFfb 100 NU - - 73 -

          Technical details
          spindle diameter 110 mm︱x-travel 1300 mm︱y-travel 1400 mm︱z-travel 1000 mm︱table surface area 1400x1200 mm︱faceplate dabei mm︱total power requirement kW︱weight of the machine ca. 18 t︱dimensions of the machine ca. m︱
            spindle diameter 110 mm
            x-travel 1300 mm
            y-travel 1400 mm
            z-travel 1000 mm
            table surface area 1400x1200 mm
            faceplate dabei mm
            weight of the machine ca. 18 t
          Datasheet
          Request / Contact
          used Boring mills / Machining Centers / Drilling machines Table Type Boring and Milling Machine FERMAT WFT 13


          • Kemmerich Werkzeugmaschinen GmbH
          • Im Rottfeld 1a
          • 40789 Monheim am Rhein
          • Deutschland

          • +49 2173 207474
            +49 2173 207473
          • info@kemmerich.biz
            www.kemmerich.biz
          #1020-17279 · Table Type Boring and Milling Machine

          FERMAT - WFT 13 - - 2016 - Heidenhain iTNC 530

          Technical details
          spindle diameter 130 mm︱x-travel 3000 mm︱y-travel 2500 mm︱z-axis 1500 mm︱W-axis (spindle longitudinal) 730 mm︱table: 2200 x 1800 mm︱table load capacity - central/maximum 20 Tonnen︱turning speed range - power take off spindle 3000 U/min︱spindle headstock drive 41 / 61,5 kW︱rapid traverse 12 / 10 m/min︱control Heidenhain iTNC 530 ︱total power requirement 120 kVA︱dimensions of the machine ca. 6,35 x 7,2 x 5,3 m︱weight of the machine ca. 44 t︱
          equipped with: - CNC Control Heidenhain iTNC 530 - CNC rotary table on cross roller taper bearing with 2 pinions and 2 servomotors (1800x2200mm, 20t) - Coolant through Spindle 70bar & Paperbandfilter - Chip conveyor - Operator´s fixed safety shield - Heidenhain linear scales for X, Y, Z axes, Rotary scale and encoder Heidenhain for B axis - Air-conditioned electro cabinet - ATC 40-fold (SK 50) - Automatic lubrication system - Hydraulic system - Renishaw RMP 60 only approx 2000 Spindle Hours Accessoreis: UHAmi 30 Universal Milling Head with Pick-Up Station: Price upon request
            spindle diameter 130 mm
            x-travel 3000 mm
            y-travel 2500 mm
            z-axis 1500 mm
            W-axis (spindle longitudinal) 730 mm
            table: 2200 x 1800 mm
            table load capacity - central/ma. 20 Tonnen
            turning speed range - power take. 3000 U/min
            spindle headstock drive 41 / 61,5 kW
            rapid traverse 12 / 10 m/min
            control Heidenhain iTNC 530
            total power requirement 120 kVA
            dimensions of the machine ca. 6,35 x 7,2 x 5,3 m
            weight of the machine ca. 44 t
            Description :
            equipped with:
            - CNC Control Heidenhain iTNC 530
            - CNC rotary table on cross roller taper bearing with 2 pinions and 2
            servomotors (1800x2200mm, 20t)
            - Coolant through Spindle 70bar & Paperbandfilter
            - Chip conveyor
            - Operator´s fixed safety shield
            - Heidenhain linear scales for X, Y, Z axes, Rotary scale and encoder
            Heidenhain for B axis
            - Air-conditioned electro cabinet
            - ATC 40-fold (SK 50)
            - Automatic lubrication system
            - Hydraulic system
            - Renishaw RMP 60

            only approx 2000 Spindle Hours
            Accessoreis: UHAmi 30 Universal Milling Head with Pick-Up Station: Price upon
            request
          Datasheet
          Request / Contact
          used Boring mills / Machining Centers / Drilling machines Table Type Boring and Milling Machine FERMAT WFT 13


          • Kemmerich Werkzeugmaschinen GmbH
          • Im Rottfeld 1a
          • 40789 Monheim am Rhein
          • Deutschland

          • +49 2173 207474
            +49 2173 207473
          • info@kemmerich.biz
            www.kemmerich.biz
          #1020-18745 · Table Type Boring and Milling Machine

          FERMAT - WFT 13 - - 2014 - Heidenhain iTNC530

          Technical details
          spindle diameter 130 mm︱x-travel 4000 mm︱y-travel 2500 mm︱z-axis 1500 mm︱W-axis (spindle longitudinal) 730 mm︱table: 2600 x 1800 mm︱table load capacity - central/maximum 15 t︱turning speed range - power take off spindle 10-3000 U/min︱spindle headstock drive 37 kW︱rapid traverse 12 / 10 m/min︱total power requirement 94 kVA︱control Heidenhain iTNC530 ︱dimensions of the machine ca. 9 x 9,6 x 5,4 mm︱weight of the machine ca. 49 t︱
          equipped with: - CNC Control Heidenhain iTNC 530 - CNC rotary 1800x2600mm - Chip conveyor - coolant & Filtering Unit - ATC 110-fold (ISO 50) - Automatic lubrication system - Hydraulic system
            spindle diameter 130 mm
            x-travel 4000 mm
            y-travel 2500 mm
            z-axis 1500 mm
            W-axis (spindle longitudinal) 730 mm
            table: 2600 x 1800 mm
            table load capacity - central/ma. 15 t
            turning speed range - power take. 10-3000 U/min
            spindle headstock drive 37 kW
            rapid traverse 12 / 10 m/min
            total power requirement 94 kVA
            control Heidenhain iTNC530
            dimensions of the machine ca. 9 x 9,6 x 5,4 mm
            weight of the machine ca. 49 t
            Description :
            equipped with:
            - CNC Control Heidenhain iTNC 530
            - CNC rotary 1800x2600mm
            - Chip conveyor
            - coolant & Filtering Unit
            - ATC 110-fold (ISO 50)
            - Automatic lubrication system
            - Hydraulic system


          Datasheet
          Request / Contact
          used Boring mills / Machining Centers / Drilling machines Table Type Boring and Milling Machine FERMAT WFT 13 CNC


          • STEINHAND GmbH
          • Wiehagen 10
          • 45472 Mülheim a.d. Ruhr
          • Deutschland

          • +49 (0) 208 / 444 865 01
            +49 (0) 208 / 444 865 29
          • info@steinhand.de
            www.steinhand.de
          #2026-1304 · Table Type Boring and Milling Machine

          FERMAT - WFT 13 CNC - - 2014 - Siemens - 840D SL

          Technical details
          travel -x axis 4.000 mm︱travel -y axis 3.000 mm︱travel -z axis 2.000 mm︱travel -w axis 730 mm︱control Siemens - 840D SL ︱work spindle diameter ø 130 mm︱number of spindle speeds 10 - 3.000 U/min︱Size of table plate 2.000 x 2.400 mm︱max. workpiece weight 20.000 kg︱table height 1.2000 mm︱tool changer made by: Kuka ︱numbers of positions in the tool changer 105 ︱taper ISO 50 ︱Dimensions (L x W x H) 9.000 x 7.440 x 5.850 mm︱weight of the machine 57.620 kg︱
          Track-controlled horizontal drilling machine | FERMAT - WFT 13 CNC with automatic vertical head milling head (PHA 37) for processing of the workpieces with the possibility of rotation up to 90°. All accessories are included (see pictures): - automatic vertical head - 2x clamping angle Further information: - W-axis programmable - controlled roundtable 360 ° - documentation is available The machine is in very good condition and has been put into operation in 2016. The machine only has 9300 hours of Power-On. A detailed list of hours can be found in the attached pictures. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: WFT13 | WFT-13 | WFT13-CNC
            travel -x axis 4.000 mm
            travel -y axis 3.000 mm
            travel -z axis 2.000 mm
            travel -w axis 730 mm
            control Siemens - 840D SL
            work spindle diameter ø 130 mm
            number of spindle speeds 10 - 3.000 U/min
            Size of table plate 2.000 x 2.400 mm
            max. workpiece weight 20.000 kg
            table height 1.2000 mm
            tool changer made by: Kuka
            numbers of positions in the tool. 105
            taper ISO 50
            Dimensions (L x W x H) 9.000 x 7.440 x 5.850 mm
            weight of the machine 57.620 kg
            Description :
            Track-controlled horizontal drilling machine | FERMAT - WFT 13 CNC
            with automatic vertical head milling head (PHA 37) for
            processing of the workpieces with the possibility of rotation up to 90°.


            All accessories are included (see pictures):
            - automatic vertical head
            - 2x clamping angle

            Further information:
            - W-axis programmable
            - controlled roundtable 360 °
            - documentation is available


            The machine is in very good condition and has been put into operation in 2016.
            The machine only has 9300 hours of Power-On.
            A detailed list of hours can be found in the attached pictures.

            - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
            #Tags: WFT13 | WFT-13 | WFT13-CNC
          Datasheet
          Request / Contact
          used Boring mills / Machining Centers / Drilling machines Table Type Boring and Milling Machine TOS-VARNSDORF WHN 13 CNC


          • Kemmerich Werkzeugmaschinen GmbH
          • Im Rottfeld 1a
          • 40789 Monheim am Rhein
          • Deutschland

          • +49 2173 207474
            +49 2173 207473
          • info@kemmerich.biz
            www.kemmerich.biz
          #1020-19026 · Table Type Boring and Milling Machine

          TOS-VARNSDORF - WHN 13 CNC - - 2013 - Heidenhain iTNC 530

          Technical details
          spindle diameter 130 mm︱x-travel 6000 mm︱y-travel 2500 mm︱z-travel 2000 mm︱w-axis 800 mm︱b-axis 360 °︱table: 2000 x 2500 ︱spindle turning speed range 3000 U/min︱feed range 4 - 3000 mm/min︱table load 25 t︱spindle taper ISO 50 ︱spindle motor 37 kW︱rapid traverse 9 m/min︱Control Heidenhain iTNC 530 ︱b-axis 360 °︱total power requirement ca 70 kW︱weight 36 t︱range L-W-H 8 x 8 x 3,5 m︱
          equipped with: - CNC control Heidenhein iTNC 530 & handwheel - clamping table 1800 x 2500mm - 25t -- full B-axis with 360,000 positions - coolant - IKZ ca 21.000 Spindle Hours
            spindle diameter 130 mm
            x-travel 6000 mm
            y-travel 2500 mm
            z-travel 2000 mm
            w-axis 800 mm
            b-axis 360 °
            table: 2000 x 2500
            spindle turning speed range 3000 U/min
            feed range 4 - 3000 mm/min
            table load 25 t
            spindle taper ISO 50
            spindle motor 37 kW
            rapid traverse 9 m/min
            Control Heidenhain iTNC 530
            b-axis 360 °
            total power requirement ca 70 kW
            weight 36 t
            range L-W-H 8 x 8 x 3,5 m
            Description :
            equipped with:
            - CNC control Heidenhein iTNC 530 & handwheel
            - clamping table 1800 x 2500mm - 25t
            -- full B-axis with 360,000 positions
            - coolant
            - IKZ

            ca 21.000 Spindle Hours
          Datasheet
          Request / Contact
          used Boring mills / Machining Centers / Drilling machines Table Type Boring and Milling Machine TOS WHQ13


          • Karl Günter Wirths GmbH
          • Scharpenberger Strasse 96-98
          • 58256 Ennepetal
          • Deutschland

          • 02333-79050
            02333-790555
          • sales@wirths.net
            www.wirths.net
          #1041-70100 · Table Type Boring and Milling Machine

          TOS - WHQ13 - - 2012 - S 840 D

          Technical details
          spindle diameter 130 mm︱x-travel 4000 mm︱y-travel 2500 mm︱Control S 840 D ︱z-travel 1600 mm︱W-axis (spindle longitudinal) 800 mm︱table-size 2500 x 1800 mm︱max. workpiece weight 12000 kg︱tool taper ISO 50 ︱spindle turning speed range 10- 3000 U/min︱total power requirement 55 kW︱weight of the machine ca. 50 t︱dimensions of the machine ca. 6 x 6 x 4 m︱
            spindle diameter 130 mm
            x-travel 4000 mm
            y-travel 2500 mm
            Control S 840 D
            z-travel 1600 mm
            W-axis (spindle longitudinal) 800 mm
            table-size 2500 x 1800 mm
            max. workpiece weight 12000 kg
            tool taper ISO 50
            spindle turning speed range 10- 3000 U/min
            total power requirement 55 kW
            weight of the machine ca. 50 t
            dimensions of the machine ca. 6 x 6 x 4 m
          Datasheet
          Request / Contact
          used Boring mills / Machining Centers / Drilling machines Table Type Boring and Milling Machine UNION KC 150


          • MS Maschinenhandel GmbH
          • Unterdorf 34
          • 6532 Ladis
          • Österreich

          • +43 (0) 5472 219 07
            +43 (0) 5472 219 07 22
          • info@ms-maschinen.at
            www.ms-maschinen.at
          #2034-24 · Table Type Boring and Milling Machine

          UNION - KC 150 - - 2009 - Siemens Sinumerik 840D

          Technical details
          spindle diameter 150 mm︱x-travel 4000 mm︱y-travel 3000 mm︱z-travel 1500 mm︱W-axis (spindle longitudinal) 750 mm︱Control Siemens Sinumerik 840D ︱tool taper ISO SK-50 ︱coolant IKZ ︱table surface area 2000 x 2500 mm︱table load 20 t︱no. of tools in magazin 40 ︱spindle turning speed range U/min︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱
            spindle diameter 150 mm
            x-travel 4000 mm
            y-travel 3000 mm
            z-travel 1500 mm
            W-axis (spindle longitudinal) 750 mm
            Control Siemens Sinumerik 840D
            tool taper ISO SK-50
            coolant IKZ
            table surface area 2000 x 2500 mm
            table load 20 t
            no. of tools in magazin 40
          Datasheet
          Request / Contact
          used Boring mills / Machining Centers / Drilling machines Table Type Boring and Milling Machine UNION TC 130


          • MS Maschinenhandel GmbH
          • Unterdorf 34
          • 6532 Ladis
          • Österreich

          • +43 (0) 5472 219 07
            +43 (0) 5472 219 07 22
          • info@ms-maschinen.at
            www.ms-maschinen.at
          #2034-25 · Table Type Boring and Milling Machine

          UNION - TC 130 - - 2006 - Siemens Sinumerik 840D

          Technical details
          spindle diameter 130 mm︱x-travel 2500 mm︱y-travel 2500 mm︱Control Siemens Sinumerik 840D ︱table surface area 2000 x 1600 mm︱table load t︱z-travel 1500 mm︱W-axis (spindle longitudinal) 750 mm︱tool taper ISO SK 50 ︱spindle turning speed range 5 - 3000 U/min︱numbers of tools in magazin 40 ︱coolant IKZ ︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱
            spindle diameter 130 mm
            x-travel 2500 mm
            y-travel 2500 mm
            Control Siemens Sinumerik 840D
            table surface area 2000 x 1600 mm
            z-travel 1500 mm
            W-axis (spindle longitudinal) 750 mm
            tool taper ISO SK 50
            spindle turning speed range 5 - 3000 U/min
            numbers of tools in magazin 40
            coolant IKZ
          Datasheet
          Request / Contact
          used Boring mills / Machining Centers / Drilling machines Table Type Boring and Milling Machine PEGARD Flexivit 2 CNC


          • Harry Vraets Machinery B.V.
          • Gezellenstraat 2
          • 3861RD Nijkerk
          • Niederlande

          • +31 (0)332452145
          • info@vraetsmachinery.com
            www.vraetsmachinery.com
          #2039-11785MM · Table Type Boring and Milling Machine

          PEGARD - Flexivit 2 CNC - - 2000 - Siemens 840D

          Technical details
          spindle diameter 130 mm︱x-travel 3000 mm︱y-travel 1750 mm︱z-travel 1750 mm︱control Siemens 840D ︱taper ISO 50 P.D.B. ︱w-axis 600 mm︱Table dimensions 1250 x 1250 mm︱table load 8 t︱spindle turning speed range 20 - 4000 U/min︱voltage 400 V︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱
            spindle diameter 130 mm
            x-travel 3000 mm
            y-travel 1750 mm
            z-travel 1750 mm
            control Siemens 840D
            taper ISO 50 P.D.B.
            w-axis 600 mm
            Table dimensions 1250 x 1250 mm
            table load 8 t
            spindle turning speed range 20 - 4000 U/min
            voltage 400 V
          Datasheet
          Request / Contact
          used Boring mills / Machining Centers / Drilling machines Table Type Boring and Milling Machine TOS-VARNSDORF WH 105 CNC


          • Isabelle Knops
          • Opladener Str. 126
          • 40789 Monheim am Rhein
          • Deutschland

          • +49 (0)2173-4999611
            +49 (0)2173-8546560
          • isabelle.knops@isabelleknops.com
            www.isabelleknops.com
          #2013-E0334 · Table Type Boring and Milling Machine

          TOS-VARNSDORF - WH 105 CNC - - 2000 -

          Technical details
          spindle diameter 105 mm︱x-travel 1.800 mm︱y-travel 1.250 mm︱Control ︱z-axis 1.250 mm︱w-axis 630 mm︱surface area 1.250 x 1.400 mm︱table load max. 3 t︱spindle speed: 2.800 ︱total power requirement kW︱weight of the machine ca. t︱
          Table Type Boring and Milling Machine / Brand: TOS-VARNSDORF / Type: WH 105 CNC Year of construction: 2000 The machine can be inspected by appointment in operation. Condition: Well used / ready for use. Operating hours (as of 07 September 2021): - Control on: 73.175 h - Machine on: 36.475 h - Program run: 12.052 h - Spindle operation: 13.907 h TECHNICAL DATA: - CNC control: HEIDENHAIN TNC 426 PB Travels: - X-axis (Cross adjustment of the table): 1.800 mm - Y-axis (Vertical adjustment of the headstock): 1.250 mm - Z-axis (Longitudinal adjustment of the table): 1.250 mm - W-axis (Spindle extension): 630 mm - Table clamping surface: 1.250 x 1.400 mm - Table load max.: 3 tons Spindle: - Spindle diameter: 105 mm - Spindle speed max.: 2.800 rpm - Max. Main engine power: 28 kW EQUIPMENT: - Measuring system: HEIDENHAIN - Drives: SIEMENS - Tool shaft: SK 50 - 1 x Air-/oil cooling unit - 1 x Oil cooling unit - Documentation - CE marking NO chip conveyor ! Without guarantee for completeness and correctness of the technical information and the equipment.
            spindle diameter 105 mm
            x-travel 1.800 mm
            y-travel 1.250 mm
            z-axis 1.250 mm
            w-axis 630 mm
            surface area 1.250 x 1.400 mm
            table load max. 3 t
            spindle speed: 2.800
            Description :
            Table Type Boring and Milling Machine / Brand: TOS-VARNSDORF / Type: WH 105 CNC
            Year of construction: 2000

            The machine can be inspected by appointment in operation.

            Condition: Well used / ready for use.

            Operating hours (as of 07 September 2021):
            - Control on: 73.175 h
            - Machine on: 36.475 h
            - Program run: 12.052 h
            - Spindle operation: 13.907 h

            TECHNICAL DATA:
            - CNC control: HEIDENHAIN TNC 426 PB

            Travels:
            - X-axis (Cross adjustment of the table): 1.800 mm
            - Y-axis (Vertical adjustment of the headstock): 1.250 mm
            - Z-axis (Longitudinal adjustment of the table): 1.250 mm
            - W-axis (Spindle extension): 630 mm
            - Table clamping surface: 1.250 x 1.400 mm
            - Table load max.: 3 tons

            Spindle:
            - Spindle diameter: 105 mm
            - Spindle speed max.: 2.800 rpm
            - Max. Main engine power: 28 kW

            EQUIPMENT:
            - Measuring system: HEIDENHAIN
            - Drives: SIEMENS
            - Tool shaft: SK 50
            - 1 x Air-/oil cooling unit
            - 1 x Oil cooling unit
            - Documentation
            - CE marking

            NO chip conveyor !

            Without guarantee for completeness and correctness of the technical information
            and the equipment.
          Datasheet
          Request / Contact
          used Boring mills / Machining Centers / Drilling machines Table Type Boring and Milling Machine TOS WHN 13.8


          • Markus Hirsch GmbH
          • Niersweg 84
          • 47877 Willich
          • Deutschland

          • +49 2156 49894 12
            +49 2156 49894 10
          • hirsch@hirsch-maschinen.de
            www.hirsch-maschinen.de
          #1077-03391 · Table Type Boring and Milling Machine

          TOS - WHN 13.8 - - 2000 - Heidenhain

          Technical details
          spindle diameter 130 mm︱x-travel 3500 mm︱y-travel 2500 mm︱z-travel 1250 mm︱w-axis 800 mm︱b-axis 360 °︱spindle turning speed range 2400 U/min︱Control Heidenhain ︱type 426 ︱table surface area 1800x2200 mm︱Table load 12000 kg︱spindle taper ISO 50 ︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱
            spindle diameter 130 mm
            x-travel 3500 mm
            y-travel 2500 mm
            z-travel 1250 mm
            w-axis 800 mm
            b-axis 360 °
            spindle turning speed range 2400 U/min
            Control Heidenhain
            type 426
            table surface area 1800x2200 mm
            Table load 12000 kg
            spindle taper ISO 50
          Datasheet
          Request / Contact
          used Boring mills / Machining Centers / Drilling machines Table Type Boring and Milling Machine KURAKI Saturn 11TCS II


          • Leyendecker & Hollmann GmbH
          • Konrad-Zuse-Str. 5
          • 40789 Monheim
          • Deutschland

          • +49 (2173) 22 55 0
            +49 (2173) 25627
          • info@LHmachine.com
            www.LHmachine.com
          #1083-03120 · Table Type Boring and Milling Machine

          KURAKI - Saturn 11TCS II - - 1999 - Fanuc 16M

          Technical details
          spindle diameter 110 mm︱x-travel 2500 mm︱y-travel 1800 mm︱z-travel 1450 mm︱w-travel 500 mm︱b-axis 360 °︱Control Fanuc 16M ︱distance spindle nose and table 550-2000 mm︱surface area 1600 x 1400 mm︱workpiece weight max. 6500 kg︱feed speeds x/y/z axis 1-6000 mm/min︱feed speed w-axis 1-6000 mm/min︱rapid traverse x/y/z 12000 mm/min︱rapid traverse (w-axis) 6000 mm/min︱Rapid traverse B axis 2 1/min︱feed capacities Z/W 20000 N︱working spindle: ︱power requirement 18,5 kW︱Torque 2630 Nm︱turning speed range 5-3000 1/min︱
          Equipment / Accessories: - tool changer 60 tools - tool taper SK50 - chip conveyor make Sommermeyer, type SF50 - clamping screws - clamping iron - clamping blocks - tool trolley, equipped with approx. 12 tool holders, tools - angle head - coolant device (extern/intern) - documentation
            spindle diameter 110 mm
            x-travel 2500 mm
            y-travel 1800 mm
            z-travel 1450 mm
            w-travel 500 mm
            b-axis 360 °
            Control Fanuc 16M
            distance spindle nose and table 550-2000 mm
            surface area 1600 x 1400 mm
            workpiece weight max. 6500 kg
            feed speeds x/y/z axis 1-6000 mm/min
            feed speed w-axis 1-6000 mm/min
            rapid traverse x/y/z 12000 mm/min
            rapid traverse (w-axis) 6000 mm/min
            Rapid traverse B axis 2 1/min
            feed capacities Z/W 20000 N
            power requirement 18,5 kW
            Torque 2630 Nm
            turning speed range 5-3000 1/min
            Description :
            Equipment / Accessories:
            - tool changer 60 tools
            - tool taper SK50
            - chip conveyor make Sommermeyer, type SF50
            - clamping screws
            - clamping iron
            - clamping blocks
            - tool trolley, equipped with approx. 12 tool holders, tools
            - angle head
            - coolant device (extern/intern)
            - documentation
          Datasheet
          Request / Contact
          used Boring mills / Machining Centers / Drilling machines Table Type Boring and Milling Machine TOS-VARNSDORF WHQ 130 MC


          • Kemmerich Werkzeugmaschinen GmbH
          • Im Rottfeld 1a
          • 40789 Monheim am Rhein
          • Deutschland

          • +49 2173 207474
            +49 2173 207473
          • info@kemmerich.biz
            www.kemmerich.biz
          #1020-18313 · Table Type Boring and Milling Machine

          TOS-VARNSDORF - WHQ 130 MC - - 1999 - Heidenhain TNC 426

          Technical details
          spindle diameter 140 mm︱x-travel 3000 mm︱y-travel 2000 mm︱z-travel 1250 mm︱w-axis 560 mm︱b-axis 360 °︱table: 1600 x 1800 ︱spindle turning speed range 2500 U/min︱feed range 1 - 5000 mm/min︱table load 8 t︱spindle taper ISO 50 ︱spindle motor 37 kW︱rapid traverse 10 m/min︱Control Heidenhain TNC 426 ︱total power requirement kVA︱weight t︱range L-W-H m︱
          equipped with: - CNC control Heidenhain TNC 426 & handwheel - 2x clamping table 1600 x 1800 - Pallet Changer - Tool Changer 60-folf (ISO 50) - Coolant device with band filter system - coolant through Spindle - Chip conveyor
            spindle diameter 140 mm
            x-travel 3000 mm
            y-travel 2000 mm
            z-travel 1250 mm
            w-axis 560 mm
            b-axis 360 °
            table: 1600 x 1800
            spindle turning speed range 2500 U/min
            feed range 1 - 5000 mm/min
            table load 8 t
            spindle taper ISO 50
            spindle motor 37 kW
            rapid traverse 10 m/min
            Control Heidenhain TNC 426
            Description :
            equipped with:
            - CNC control Heidenhain TNC 426 & handwheel
            - 2x clamping table 1600 x 1800
            - Pallet Changer
            - Tool Changer 60-folf (ISO 50)
            - Coolant device with band filter system
            - coolant through Spindle
            - Chip conveyor


          Datasheet
          Request / Contact
          used Boring mills / Machining Centers / Drilling machines Table Type Boring and Milling Machine TOS WHN 110 Q


          • Markus Hirsch GmbH
          • Niersweg 84
          • 47877 Willich
          • Deutschland

          • +49 2156 49894 12
            +49 2156 49894 10
          • hirsch@hirsch-maschinen.de
            www.hirsch-maschinen.de
          #1077-03585 · Table Type Boring and Milling Machine

          TOS - WHN 110 Q - - 1998 - Heidenhain

          Technical details
          spindle diameter 110 mm︱x-travel 2000 mm︱y-travel 1400 mm︱z-travel 1200 mm︱spindle turning speed range 2800 U/min︱spindle taper ISO 50 ︱Control Heidenhain ︱type 426 ︱table surface area 1400x1400 mm︱Table load 8000 kg︱Cooling through the spindle bar︱Tool changer 60 Pos.︱chip conveyor ︱spindle stroke 710 mm︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱
            spindle diameter 110 mm
            x-travel 2000 mm
            y-travel 1400 mm
            z-travel 1200 mm
            spindle turning speed range 2800 U/min
            spindle taper ISO 50
            Control Heidenhain
            type 426
            table surface area 1400x1400 mm
            Table load 8000 kg
            Tool changer 60 Pos.
            spindle stroke 710 mm
          Datasheet
          Request / Contact
          used Boring mills / Machining Centers / Drilling machines Table Type Boring and Milling Machine TOS W75


          • AS Maschinenhandel
          • Welserstr. 10e
          • 51149 Köln
          • Deutschland

          • +49 (0)22031864856
            +49 (0)22031864857
          • mail@asmaschinenhandel.de
            www.asmaschinenhandel.de
          #2044-10018 · Table Type Boring and Milling Machine

          TOS - W75 - - 1998 -

          Technical details
          spindle diameter 75 mm︱x-travel 1250 mm︱y-travel 900 mm︱z-travel 1000 mm︱w-axis 560 mm︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱
            spindle diameter 75 mm
            x-travel 1250 mm
            y-travel 900 mm
            z-travel 1000 mm
            w-axis 560 mm
          Datasheet
          Request / Contact
          used Boring mills / Machining Centers / Drilling machines Table Type Boring and Milling Machine TOS WHN 13.8


          • AS Maschinenhandel
          • Welserstr. 10e
          • 51149 Köln
          • Deutschland

          • +49 (0)22031864856
            +49 (0)22031864857
          • mail@asmaschinenhandel.de
            www.asmaschinenhandel.de
          #2044-10034 · Table Type Boring and Milling Machine

          TOS - WHN 13.8 - - 1995 - Heidenhain TNC 415

          Technical details
          spindle diameter 130 mm︱x-travel 3500 mm︱y-travel 2000 mm︱z-travel 1250 mm︱w-axis 800 mm︱b-axis 360 °︱table-size 2200x1800 mm︱Control Heidenhain TNC 415 ︱total power requirement kW︱weight of the machine ca. 12 t︱dimensions of the machine ca. m︱
            spindle diameter 130 mm
            x-travel 3500 mm
            y-travel 2000 mm
            z-travel 1250 mm
            w-axis 800 mm
            b-axis 360 °
            table-size 2200x1800 mm
            Control Heidenhain TNC 415
            weight of the machine ca. 12 t
          Datasheet
          Request / Contact
          used Boring mills / Machining Centers / Drilling machines Table Type Boring and Milling Machine FEMCO1200 WBT-100SR2


          • Intermach BV
          • lange voor 71
          • 8316BC Marknesse
          • Niederlande

          • +31 (0)527 201323
          • info@intermach.nl
            www.intermach.nl
          #2050-kot180 · Table Type Boring and Milling Machine

          FEMCO1200 - WBT-100SR2 - - 1995 -

          Technical details
          spindle diameter 100 mm︱x-travel 1200 mm︱y-travel 800 mm︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. 5,6x3,4x3,x7 m︱
          Brand: Femco Type: WBT-100SR2 CNC brand: Mitsubishi CNC model: Meldas C3 Year of make: 1995-05 Facing support Table length: 1.440 mm Table width: 1.600 mm Spindle diameter: 100 mm ø Machine dimensions (lxwxh): 5.680 x 3.400 x 3.700 mm incl. right-angle milling head type Huron
            spindle diameter 100 mm
            x-travel 1200 mm
            y-travel 800 mm
            dimensions of the machine ca. 5,6x3,4x3,x7 m
            Description :
            Brand: Femco
            Type: WBT-100SR2
            CNC brand: Mitsubishi
            CNC model: Meldas C3
            Year of make: 1995-05
            Facing support
            Table length: 1.440 mm
            Table width: 1.600 mm
            Spindle diameter: 100 mm ø
            Machine dimensions (lxwxh): 5.680 x 3.400 x 3.700 mm
            incl. right-angle milling head type Huron
          Datasheet
          Request / Contact
          •   
          •   
          • 1  
          • 2  
          • 3  
          • 4  
          • 5  
          • 6  
          •   
          •   


          Table Type Boring and Milling Machine from LagerMaschinen
          Table type boring and milling machine from LagerMaschinen

          Buying a new machine for your small or medium-sized business is not without its concerns especially when buying new. With a table type boring and milling machine from LagerMaschinen you can rest assured that your machine will be kept to the highest standard and provide reliable service to your company for years to come. The table type boring and milling machine will serve you far into the future: whether horizontal or vertical calibrated to service wood surfaces or metal parts the table type boring and milling machine from LagerMaschinen is definitely the answer for your machine needs.

          Table type boring and milling machine - advances

          With a table type boring and milling machine you can easily maneuver long pieces of metal wood or other materials. As a result the table type boring and milling machine is a fantastic addition to any manufacturing facility. This machine provides invaluable assistance to workers in the field who make choices based on what the company has purchased. The table type boring and milling machine helps you ensure a safe drive no matter where you're going.

          Everything you need at LagerMaschinen

          Qualified machine specialists can help find the perfect machine for you. Whether you're manufacturing plastics or wooden products the table type boring and milling machine is an abslute draw. The table type boring and milling machine with LagerMaschinen is a sure investment. Our experts not only help you choose the right tool for your ultra-specific needs but will also speak with sellers as well as providing a full point of view from the buyer's perspective.