European network of stockholding machinery dealers

Category:
    Manufacturer:
      Machines:
        Trader:

          Metal Processing - Ram-Type Floor Boring and Milling M-C

          Machinelist: Ram-Type Floor Boring and Milling M/C


          Ram-Type Floor Boring and Milling M/C

          used Boring mills / Machining Centers / Drilling machines Ram-Type Floor Boring and Milling M/C TITAN (PAMA) AFP 200


          • Leyendecker & Hollmann GmbH
          • Konrad-Zuse-Str. 5
          • 40789 Monheim
          • Deutschland

          • +49 (2173) 22 55 0
            +49 (2173) 25627
          • info@LHmachine.com
            www.LHmachine.com
          #1083-02796 · Ram-Type Floor Boring and Milling M/C

          TITAN (PAMA) - AFP 200 - - retrofit 2010 - Sinumerik 840 D

          Technical details
          spindle diameter 203,2 mm︱x-travel 9.000 mm︱y-travel 4.000 mm︱Control Sinumerik 840 D ︱grinding spindel dia. 335 mm︱spindle taper ISO 60 ︱spindle turning speed range 1-350 / 5-1.200 U/min︱w-axis 800 mm︱z-axis 1.200 mm︱rapid traverse X-axis 8.000 m/min︱rapid travel Y-axis 6.000 m/min︱RAM dimensions 530 x 600 mm︱Main drive 75 kW︱total power requirement 165 kW︱weight of the machine ca. ca. 130 t︱dimensions of the machine ca. 16 x 5,5 x 8,1 m︱
          The machine had not turning table. We can offer to you a separate turning table WOTAN Rapid 30dv, stock no. 02983. Equipment / Accessories: - with ram and travelling column - hydrostatic guideways in x,- y,- and w-axis - telescopic cover for bed x-axis - cumulated z- and w-axis - levelling shoes - platform y-axis
            spindle diameter 203,2 mm
            x-travel 9.000 mm
            y-travel 4.000 mm
            Control Sinumerik 840 D
            grinding spindel dia. 335 mm
            spindle taper ISO 60
            spindle turning speed range 1-350 / 5-1.200 U/min
            w-axis 800 mm
            z-axis 1.200 mm
            rapid traverse X-axis 8.000 m/min
            rapid travel Y-axis 6.000 m/min
            RAM dimensions 530 x 600 mm
            Main drive 75 kW
            total power requirement 165 kW
            weight of the machine ca. ca. 130 t
            dimensions of the machine ca. 16 x 5,5 x 8,1 m
            Description :
            The machine had not turning table.
            We can offer to you a separate turning table WOTAN Rapid 30dv, stock no. 02983.

            Equipment / Accessories:
            - with ram and travelling column
            - hydrostatic guideways in x,- y,- and w-axis
            - telescopic cover for bed x-axis
            - cumulated z- and w-axis
            - levelling shoes
            - platform y-axis
          285.000 €
          Datasheet
          Request / Contact
          used Boring mills / Machining Centers / Drilling machines Ram-Type Floor Boring and Milling M/C INNOCENTI CWB 200


          • Knops Werkzeugmaschinen
          • Ronsdorfer Str. 143
          • 40233 Düsseldorf
          • Deutschland

          • 0211 8793140
            0211 8793134
          • maschinen@knops.de
            www.knops.de
          #1022-H07206 · Ram-Type Floor Boring and Milling M/C

          INNOCENTI - CWB 200 - - rebuilt 1996 - Siemens 840 C

          Technical details
          spindle diameter 200 mm︱x-travel 12400 mm︱y-travel 4800 mm︱z-travel 890 (ram travel) mm︱W-axis (spindle longitudinal) 2000 mm︱control Siemens 840 C ︱spindle taper 60 ISO︱spindle turning speed range 1,8 - 445 U/min︱ram head dimension 1230 x 830 mm︱number of controlled axis 4 (X-Y-Z-W) ︱rotary table: ︱table surface area 2280 x 2280 mm︱table load 20 t︱total power requirement kW︱weight of the machine ca. 250 t︱dimensions of the machine ca. m︱floor plates 15500 x 6400 mm︱several milling heads
          The machine is already dismantled. Approx. 12 trucks are necassary for the transport. Heaviest machine part weight 39000 kgs. Attention: We offer the machine now for a special price of € 120,000 free loaded truck. The offer is only valid until the end of week 6/2020. The machine has been rebuilt with CNC 1996. Condition excellent Accessories: CNC control Siemens 840C X-Y-Z-W axis Boring bar slide movment 3000 mm Max boring bar length 1800 mm Max bar dia. 125 mm Floor Plates 15500-6400 mm Rotary Table Arbor support Boring bars 3 pc(s) Angles Plane 4 pc. 4m - 4 small Vertical Heads - supports and many more…
            spindle diameter 200 mm
            x-travel 12400 mm
            y-travel 4800 mm
            z-travel 890 (ram travel) mm
            W-axis (spindle longitudinal) 2000 mm
            control Siemens 840 C
            spindle taper 60 ISO
            spindle turning speed range 1,8 - 445 U/min
            ram head dimension 1230 x 830 mm
            number of controlled axis 4 (X-Y-Z-W)
            table surface area 2280 x 2280 mm
            table load 20 t
            weight of the machine ca. 250 t
            floor plates 15500 x 6400 mm
            Description :
            The machine is already dismantled.
            Approx. 12 trucks are necassary for the transport.
            Heaviest machine part weight 39000 kgs.

            Attention:
            We offer the machine now for a special price of € 120,000
            free loaded truck.
            The offer is only valid until the end of week 6/2020.

            The machine has been rebuilt with CNC 1996.
            Condition excellent
            Accessories:
            CNC control Siemens 840C X-Y-Z-W axis
            Boring bar slide movment 3000 mm
            Max boring bar length 1800 mm
            Max bar dia. 125 mm
            Floor Plates 15500-6400 mm
            Rotary Table
            Arbor support
            Boring bars 3 pc(s)
            Angles Plane 4 pc. 4m - 4 small
            Vertical Heads - supports and many more…
          Datasheet
          Request / Contact
          used Boring mills / Machining Centers / Drilling machines Ram-Type Floor Boring and Milling M/C SKODA FCW 150


          • Knops Werkzeugmaschinen
          • Ronsdorfer Str. 143
          • 40233 Düsseldorf
          • Deutschland

          • 0211 8793140
            0211 8793134
          • maschinen@knops.de
            www.knops.de
          #1022-E05720 · Ram-Type Floor Boring and Milling M/C

          SKODA - FCW 150 - - 2016 - SIEMENS 840 D SL

          Technical details
          spindle diameter 150 mm︱x-travel 21000 mm︱y-travel 5000 mm︱control SIEMENS 840 D SL ︱ram stroke (Z) 1200 mm︱dimension of the ram 360 x 400 mm︱tool taper ISO 50 ︱spindle turning speed range 10 - 3000 U/min︱transmission ratio 2 ︱feeds X-axis 1 - 15000 mm/min︱feeds Y-axis 1 - 15000 mm/min︱feeds Z-axis 1 - 10000 mm/min︱main drive motor 40 kW︱max. torque on the spindle 2200 Nm︱total power requirement kW︱weight of the machine ca. 39,5 t︱dimensions of the machine ca. m︱
          Double (tandem) machines. Each machine can also be operated seperately with own control. * SIEMENS 840 D SL CNC control * 4 off fork milling heads, type UFK 600 NC - Power 25 kW, max. speed 3000 rpm, max. torque 600 Nm - C-axis 360 deg, A-axis +/- 100 deg. * NO Boring spindle * ONLY air coolant The machines have already been professionally dismantled end of 2019. Setup and installation can be offered at an additional cost.
            spindle diameter 150 mm
            x-travel 21000 mm
            y-travel 5000 mm
            control SIEMENS 840 D SL
            ram stroke (Z) 1200 mm
            dimension of the ram 360 x 400 mm
            tool taper ISO 50
            spindle turning speed range 10 - 3000 U/min
            transmission ratio 2
            feeds X-axis 1 - 15000 mm/min
            feeds Y-axis 1 - 15000 mm/min
            feeds Z-axis 1 - 10000 mm/min
            main drive motor 40 kW
            max. torque on the spindle 2200 Nm
            weight of the machine ca. 39,5 t
            Description :
            Double (tandem) machines.

            Each machine can also be operated seperately with own control.

            * SIEMENS 840 D SL CNC control
            * 4 off fork milling heads, type UFK 600 NC
            - Power 25 kW, max. speed 3000 rpm, max. torque 600 Nm
            - C-axis 360 deg, A-axis +/- 100 deg.
            * NO Boring spindle
            * ONLY air coolant

            The machines have already been professionally dismantled end of 2019.
            Setup and installation can be offered at an additional cost.

          Datasheet
          Request / Contact
          used Boring mills / Machining Centers / Drilling machines Ram-Type Floor Boring and Milling M/C TOS-FERMAT WF 13 R


          • Kemmerich Werkzeugmaschinen GmbH
          • Im Rottfeld 1a
          • 40789 Monheim am Rhein
          • Deutschland

          • +49 2173 207474
            +49 2173 207473
          • info@kemmerich.biz
            www.kemmerich.biz
          #1020-17991 · Ram-Type Floor Boring and Milling M/C

          TOS-FERMAT - WF 13 R - - 2013 - Heidenhain iTNC 530

          Technical details
          spindle diameter 130 mm︱x-travel 10000 mm︱y-travel 3000 mm︱ram: diameter 400 x 400 mm︱w-axis 730 mm︱spindle turning speed range 10 - 3000 U/min︱rapid traverse 12000 mm/min︱feeds 1 - 8000 mm/min︱inner taper of milling spindel ISO 50 ︱spindle 37/56 kW︱z-axis 600 mm︱rotary table: ︱surface area 2400 x 2000 mm︱workpiece weight 20 t︱V-axis 2000 mm︱Control Heidenhain iTNC 530 ︱total power requirement 80 kVA︱dimensions of the machine ca. 12 x 7,65 x 5,6 m︱Total weight, approx. 73 t︱
          equipped with: - CNC control Heidenhain iTNC 530 - NC rotary table 2400x2000mm, 20t - IKZ 20bar - Workpiece probe TS 640 (3D) - 2 clamping base plates (5600x1885x400mm) - X/Y/Z/V axis linear scales Heidenhain - Chip conveyor - universal milling head UHAmi 30 - 0,001° indexing - Cabin for operators - CE symbol
            spindle diameter 130 mm
            x-travel 10000 mm
            y-travel 3000 mm
            ram: diameter 400 x 400 mm
            w-axis 730 mm
            spindle turning speed range 10 - 3000 U/min
            rapid traverse 12000 mm/min
            feeds 1 - 8000 mm/min
            inner taper of milling spindel ISO 50
            spindle 37/56 kW
            z-axis 600 mm
            surface area 2400 x 2000 mm
            workpiece weight 20 t
            V-axis 2000 mm
            Control Heidenhain iTNC 530
            total power requirement 80 kVA
            dimensions of the machine ca. 12 x 7,65 x 5,6 m
            Total weight, approx. 73 t
            Description :
            equipped with:
            - CNC control Heidenhain iTNC 530
            - NC rotary table 2400x2000mm, 20t
            - IKZ 20bar
            - Workpiece probe TS 640 (3D)
            - 2 clamping base plates (5600x1885x400mm)
            - X/Y/Z/V axis linear scales Heidenhain
            - Chip conveyor
            - universal milling head UHAmi 30 - 0,001° indexing
            - Cabin for operators
            - CE symbol

          Datasheet
          Request / Contact
          used Boring mills / Machining Centers / Drilling machines Ram-Type Floor Boring and Milling M/C SKODA FCW 150


          • Knops Werkzeugmaschinen
          • Ronsdorfer Str. 143
          • 40233 Düsseldorf
          • Deutschland

          • 0211 8793140
            0211 8793134
          • maschinen@knops.de
            www.knops.de
          #1022-E05719 · Ram-Type Floor Boring and Milling M/C

          SKODA - FCW 150 - - 2012 - SIEMENS 840 D SL

          Technical details
          spindle diameter 150 mm︱x-travel 5500 mm︱y-travel 5000 mm︱control SIEMENS 840 D SL ︱ram stroke (Z) 900 mm︱dimension of the ram 360 x 400 mm︱tool taper ISO 50 ︱spindle turning speed range 10 - 3000 U/min︱transmission ratio 2 ︱feeds X-axis 1 - 10000 mm/min︱feeds Y-axis 1 - 15000 mm/min︱feeds Z-axis 1 - 15000 mm/min︱main drive motor 40 kW︱max. torque on the spindle 2200 Nm︱total power requirement kW︱weight of the machine ca. 39,5 t︱dimensions of the machine ca. m︱
          * SIEMENS 840 D SL CNC control * 2 off fork milling heads, type UFK 600 NC - Power 25 kW, max. speed 3000 rpm, max. torque 600 Nm - C-axis 360 deg, A-axis +/- 100 deg. * NO Boring spindle * ONLY air coolant The machine has already been professionally dismantled end of 2019. Setup and installation can be offered at an additional cost.
            spindle diameter 150 mm
            x-travel 5500 mm
            y-travel 5000 mm
            control SIEMENS 840 D SL
            ram stroke (Z) 900 mm
            dimension of the ram 360 x 400 mm
            tool taper ISO 50
            spindle turning speed range 10 - 3000 U/min
            transmission ratio 2
            feeds X-axis 1 - 10000 mm/min
            feeds Y-axis 1 - 15000 mm/min
            feeds Z-axis 1 - 15000 mm/min
            main drive motor 40 kW
            max. torque on the spindle 2200 Nm
            weight of the machine ca. 39,5 t
            Description :
            * SIEMENS 840 D SL CNC control
            * 2 off fork milling heads, type UFK 600 NC
            - Power 25 kW, max. speed 3000 rpm, max. torque 600 Nm
            - C-axis 360 deg, A-axis +/- 100 deg.
            * NO Boring spindle
            * ONLY air coolant

            The machine has already been professionally dismantled end of 2019.
            Setup and installation can be offered at an additional cost.

          Datasheet
          Request / Contact
          used Boring mills / Machining Centers / Drilling machines Ram-Type Floor Boring and Milling M/C Titan AFP 160-5 CNC


          • Jansen Machinehandel BV
          • Bredaseweg 210
          • 4873 LA Etten-leur
          • Niederlande

          • +31 (0) 76 5015750
            +31 (0) 76 5015750
          • info@jansenmachinehandel.nl
            www.jansenmachinehandel.nl
          #2049-KOT176 · Ram-Type Floor Boring and Milling M/C

          Titan - AFP 160-5 CNC - - 2010 -

          Technical details
          CNC brand Heidenhain ︱X 15000 mm︱Y 5000 mm︱Z 800 mm︱Spindle diameter 160 mm ø︱Z/W 1800 mm︱Spindle taper ISO 50 ︱Number of pallets 3 ︱Machine dimensions (lxwxh) 13000 x 4000 x 7500 ︱Machine weight 72000
          Spindle / reach capacity: 160 mm ø Spindle speed: 2-2500 RPM Number of mechanical steps: 2 Diam. of outcoming RAM: 450 x 450 mm Spindle motor: 60 kW Feed X-Y / Z-W as: 2 - 10000/6000 mm / min. Rapid traverse X-Y as: 10000 mm / min Rapid traverse B-W axis: 6000 mm / min Table DRT 30-30: longitudinal displacement: 2500 mm Table length: 3.000 mm Table width: 3.000 mm Table load: 60 T V-axis feed: 1-6000 mm / min Table rotation speed: 0.001 - 1.15 RPM Chip removal conveyor Toolchanger Probe present 2x Milling head 2x Slotting table
            CNC brand Heidenhain
            X 15000 mm
            Y 5000 mm
            Z 800 mm
            Spindle diameter 160 mm ø
            Z/W 1800 mm
            Spindle taper ISO 50
            Number of pallets 3
            Machine dimensions (lxwxh) 13000 x 4000 x 7500
            Machine weight 72000
            Description :
            Spindle / reach capacity: 160 mm ø
            Spindle speed: 2-2500 RPM
            Number of mechanical steps: 2
            Diam. of outcoming RAM: 450 x 450 mm
            Spindle motor: 60 kW
            Feed X-Y / Z-W as: 2 - 10000/6000 mm / min.
            Rapid traverse X-Y as: 10000 mm / min
            Rapid traverse B-W axis: 6000 mm / min
            Table DRT 30-30: longitudinal displacement: 2500 mm
            Table length: 3.000 mm
            Table width: 3.000 mm
            Table load: 60 T
            V-axis feed: 1-6000 mm / min
            Table rotation speed: 0.001 - 1.15 RPM
            Chip removal conveyor
            Toolchanger
            Probe present
            2x Milling head
            2x Slotting table
          Datasheet
          Request / Contact
          used Boring mills / Machining Centers / Drilling machines Ram-Type Floor Boring and Milling M/C TITAN-PAMA AFP 200


          • SUMA GmbH
          • Aktienstr. 23 - 53
          • 45473 Mülheim
          • Deutschland

          • +49 (0)2085940719
            +49 (0)2085940758
          • suma@suma.ws
            www.suma.ws
          #1104-1001 · Ram-Type Floor Boring and Milling M/C

          TITAN-PAMA - AFP 200 - - 2008 - Siemens 840 D

          Technical details
          spindle diameter 200 mm︱x-travel 9000 mm︱y-travel 4000 mm︱Control Siemens 840 D ︱total power requirement 240 kW︱weight of the machine ca. 180 t︱dimensions of the machine ca. 18x6x11 m︱
            spindle diameter 200 mm
            x-travel 9000 mm
            y-travel 4000 mm
            Control Siemens 840 D
            total power requirement 240 kW
            weight of the machine ca. 180 t
            dimensions of the machine ca. 18x6x11 m
          Datasheet
          Request / Contact
          used Boring mills / Machining Centers / Drilling machines Ram-Type Floor Boring and Milling M/C Wotan Rapid C


          • Jansen Machinehandel BV
          • Bredaseweg 210
          • 4873 LA Etten-leur
          • Niederlande

          • +31 (0) 76 5015750
            +31 (0) 76 5015750
          • info@jansenmachinehandel.nl
            www.jansenmachinehandel.nl
          #2049-KOT142 · Ram-Type Floor Boring and Milling M/C

          Wotan - Rapid C - - 2004 -

          Technical details
          CNC brand Heidenhain ︱CNC model iTNC 530 ︱Spindle diameter 160 mm ø︱X 10000 mm︱Y 3800 mm︱Z/W 700/700 mm︱Power 120 kW︱Spindle taper ISO 50 ︱Speed 1,25 - 1250 RPM︱Rapid traverse 5000 mm/min︱Feeding 1 - 5000 mm/min︱Machine dimensions (lxwxh) 14500 x 3850 x 7360 ︱Machine weight 62300
          This machine is in 2004 retrofitted by Dories Scharmann In top condition.
            CNC brand Heidenhain
            CNC model iTNC 530
            Spindle diameter 160 mm ø
            X 10000 mm
            Y 3800 mm
            Z/W 700/700 mm
            Power 120 kW
            Spindle taper ISO 50
            Speed 1,25 - 1250 RPM
            Rapid traverse 5000 mm/min
            Feeding 1 - 5000 mm/min
            Machine dimensions (lxwxh) 14500 x 3850 x 7360
            Machine weight 62300
            Description :
            This machine is in 2004 retrofitted by Dories Scharmann
            In top condition.
          Datasheet
          Request / Contact
          used Boring mills / Machining Centers / Drilling machines Ram-Type Floor Boring and Milling M/C SCHARMANN Heavyspeed 2


          • Markus Hirsch GmbH
          • Niersweg 84
          • 47877 Willich
          • Deutschland

          • +49 2156 49894 12
            +49 2156 49894 10
          • hirsch@hirsch-maschinen.de
            www.hirsch-maschinen.de
          #1077-03287 · Ram-Type Floor Boring and Milling M/C

          SCHARMANN - Heavyspeed 2 - - 1999 - Siemens

          Technical details
          spindle diameter 160 mm︱x-travel 9000 mm︱y-travel 3000 mm︱z-axis 1000 mm︱V-axis 1500 mm︱w-axis 1000 mm︱B-axis (table) 360 °︱Control Siemens ︱type 840 D PL ︱turning speeds 3200 U/min︱Spindle capacity 63 KW︱spindle taper ISO 502000x3000 mm︱Table load 40000 kg︱Tool changer 80 ︱workpiece length 500 mm︱coolant ︱chip conveyor ︱total power requirement 80 kW︱weight of the machine ca. t︱
          Retrofit Scharmann Preparation for face slide Foundation-clamping tables 2500x2500 Foundation-clamping tables 1500x2500 foundation tables 25000 kg heads: 1x WFK 630 1x WFK 1000 with autm. six-pivot (144x2.5) 1x WFK 1000 probe torque monitoring
            spindle diameter 160 mm
            x-travel 9000 mm
            y-travel 3000 mm
            z-axis 1000 mm
            V-axis 1500 mm
            w-axis 1000 mm
            B-axis (table) 360 °
            Control Siemens
            type 840 D PL
            turning speeds 3200 U/min
            Spindle capacity 63 KW
            spindle taper ISO 50
            2000x3000 mm
            Table load 40000 kg
            Tool changer 80
            workpiece length 500 mm
            total power requirement 80 kW
            Description :
            Retrofit Scharmann
            Preparation for face slide
            Foundation-clamping tables 2500x2500
            Foundation-clamping tables 1500x2500
            foundation tables 25000 kg
            heads:
            1x WFK 630
            1x WFK 1000 with autm. six-pivot (144x2.5)
            1x WFK 1000
            probe
            torque monitoring
          Datasheet
          Request / Contact
          used Boring mills / Machining Centers / Drilling machines Ram-Type Floor Boring and Milling M/C TOS WRD 130


          • Knops Werkzeugmaschinen
          • Ronsdorfer Str. 143
          • 40233 Düsseldorf
          • Deutschland

          • 0211 8793140
            0211 8793134
          • maschinen@knops.de
            www.knops.de
          #1022-H06868 · Ram-Type Floor Boring and Milling M/C

          TOS - WRD 130 - - 1999 - Heidenhain TNC 430i

          Technical details
          spindle diameter 130 mm︱x-travel 8000 mm︱y-travel 2500 mm︱z-travel 800 mm︱W-axis (spindle longitudinal) 550 mm︱control Heidenhain TNC 430i ︱spindle speed: max. 1800 1/min.︱spindle drive 37 kW︱rotary table: CNC ︱table surface area 2500 x 2000 mm︱table load 16 t︱table travel 1450 mm︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱
          Machine in excellent condition.
            spindle diameter 130 mm
            x-travel 8000 mm
            y-travel 2500 mm
            z-travel 800 mm
            W-axis (spindle longitudinal) 550 mm
            control Heidenhain TNC 430i
            spindle speed: max. 1800 1/min.
            spindle drive 37 kW
            rotary table: CNC
            table surface area 2500 x 2000 mm
            table load 16 t
            table travel 1450 mm
            Description :
            Machine in excellent condition.
          Datasheet
          Request / Contact
          used Boring mills / Machining Centers / Drilling machines Ram-Type Floor Boring and Milling M/C WOTAN Rapid 4 P


          • Walter Kames GmbH
          • Dillenburger Weg 34
          • 40229 Düsseldorf
          • Deutschland

          • +49 211 215066 0
            +49 211 215067
          • info@kames.de
            www.kames.de
          #1004-09717 · Ram-Type Floor Boring and Milling M/C

          WOTAN - Rapid 4 P - - 1992 -

          Technical details
          spindle diameter 140 mm︱x-travel 5000 mm︱y-travel 3000 mm︱spindle stroke 700 mm︱ram: horizontal adjustment 500 mm︱dimension of the ram 310 x 310 mm︱spindle taper ISO 50 ︱spindle turning speed range 2 - 2000 U/min︱feed 5000 mm/min︱rapid traverse 10 m/min︱spindle motor 40 kW︱semi-automatic operated SIEMENS 850 ︱total power requirement 100 kW︱weight of the machine ca. 42 t︱dimensions of the machine ca. 9,5 x 3,8 x 5,95 m︱
          - control SIEMENS 850 CNC - floor plate approx. 5 x 2 m - aero-static guideways - hydrostatic spindlebearings - device for coolant through spindle - HEIDENHAIN scales - leveling elements, hand-held pendant, misc. arbors and spare parts
            spindle diameter 140 mm
            x-travel 5000 mm
            y-travel 3000 mm
            spindle stroke 700 mm
            ram: horizontal adjustment 500 mm
            dimension of the ram 310 x 310 mm
            spindle taper ISO 50
            spindle turning speed range 2 - 2000 U/min
            feed 5000 mm/min
            rapid traverse 10 m/min
            spindle motor 40 kW
            semi-automatic operated SIEMENS 850
            total power requirement 100 kW
            weight of the machine ca. 42 t
            dimensions of the machine ca. 9,5 x 3,8 x 5,95 m
            Description :
            - control SIEMENS 850 CNC
            - floor plate approx. 5 x 2 m
            - aero-static guideways
            - hydrostatic spindlebearings
            - device for coolant through spindle
            - HEIDENHAIN scales
            - leveling elements, hand-held pendant, misc. arbors and spare parts

          Datasheet
          Request / Contact
          used Boring mills / Machining Centers / Drilling machines Ram-Type Floor Boring and Milling M/C SKODA W 200 HC


          • SK Maschinen-Service GmbH
          • Tackweg 4
          • 47918 Tönisvorst
          • Deutschland

          • 02151 79350
            02151 793535
          • info@sk-maschinen.de
            www.sk-maschinen.de
          #1038-80404 · Ram-Type Floor Boring and Milling M/C

          SKODA - W 200 HC - - 1991 -

          Technical details
          spindle diameter 200 mm︱x-travel 10000 mm︱y-travel 3000 mm︱ram stroke 1600 mm︱dimension of the ram 520 x 520 mm︱tool adaptor ISO 60 ︱bore spindle stroke 2000 mm︱bore spindle turning speed range 1,6 - 630 U/min︱spindle motor 83 kW︱bore feed range 0,63 - 2500 mm/U︱milling feed range 0,63 - 5000 mm/min︱electrics - voltage/frequency 380/50 V/Hz︱Control ︱total power requirement 85 kW︱weight of the machine ca. 86 t︱dimensions of the machine ca. 13,8 x 6 x 8,3 m︱
          photos show machine first at location, then as is in our warehouse.
            spindle diameter 200 mm
            x-travel 10000 mm
            y-travel 3000 mm
            ram stroke 1600 mm
            dimension of the ram 520 x 520 mm
            tool adaptor ISO 60
            bore spindle stroke 2000 mm
            bore spindle turning speed range 1,6 - 630 U/min
            spindle motor 83 kW
            bore feed range 0,63 - 2500 mm/U
            milling feed range 0,63 - 5000 mm/min
            electrics - voltage/frequency 380/50 V/Hz
            total power requirement 85 kW
            weight of the machine ca. 86 t
            dimensions of the machine ca. 13,8 x 6 x 8,3 m
            Description :
            photos show machine first at location, then as is in our warehouse.
          Datasheet
          Request / Contact
          used Boring mills / Machining Centers / Drilling machines Ram-Type Floor Boring and Milling M/C DOERRIES-SCHARMANN HEAVYCUT 2.2 TDV 5


          • EKW Werkzeugmaschinen e.K.
          • Zeppelinstrasse 1
          • 74219 Möckmühl-Züttlingen
          • Deutschland

          • ++49(0)6298-92120
            ++49(0)6298-921212
          • info@ekw-machines.de
            www.ekw-machines.de
          #1012-7023 · Ram-Type Floor Boring and Milling M/C

          DOERRIES-SCHARMANN - HEAVYCUT 2.2 TDV 5 - - 1991 - SIEMENS 850

          Technical details
          spindle diameter 150 mm︱x-travel 11000 mm︱y-travel 3000 mm︱Control SIEMENS 850 ︱z-travel 800 mm︱w-axis 700 mm︱V-axis 2500 mm︱B-axis (table) 360 °︱tool taper SK 50 ︱spindle drive 65 kW︱spindle turning speed range 2 - 2000 U/min︱no. of tools in magazin 60 ︱no. of tools in pickup magazin 30+310 m/min.︱Total weight, approx. 180000 kg︱total power requirement kW︱weight of the machine ca. 153,1 t︱dimensions of the machine ca. 19,9 x 13,7 x 7,1 m︱
          * CNC path control SIEMENS SINUMERIK 850 * electronic handwheel * automatic tool changer 60 seats SK 50 * Pickup tool magazine 30 seats SK 50 plus 3 units * 2 NC tables SCHARMANN TDV 5 (360000 x 0,001° parting), load capacity 40 t each, clamping area 2500 x 2000 mm each, table replacing 2500 mm each (V-axis) * 3 clamping angles (2550x1200/2900x2200/2900x2300 mm) * angle milling head WFK 240/550, 25 kW drive * planer P 650 (U-axis) Ø 50-1500 mm * chip conveyor * measuring probe SK 50 RENISHAW * cooling system 4 nozzles and cooling through spindle * square support sleeve 325 x 325 mm (Z-axis 800 mm) * appr. 60 pcs. various tools and tools tapers
            spindle diameter 150 mm
            x-travel 11000 mm
            y-travel 3000 mm
            Control SIEMENS 850
            z-travel 800 mm
            w-axis 700 mm
            V-axis 2500 mm
            B-axis (table) 360 °
            tool taper SK 50
            spindle drive 65 kW
            spindle turning speed range 2 - 2000 U/min
            no. of tools in magazin 60
            no. of tools in pickup magazin 30+3
            10 m/min.
            Total weight, approx. 180000 kg
            weight of the machine ca. 153,1 t
            dimensions of the machine ca. 19,9 x 13,7 x 7,1 m
            Description :
            * CNC path control SIEMENS SINUMERIK 850
            * electronic handwheel
            * automatic tool changer 60 seats SK 50
            * Pickup tool magazine 30 seats SK 50 plus 3 units
            * 2 NC tables SCHARMANN TDV 5 (360000 x 0,001° parting),
            load capacity 40 t each, clamping area 2500 x 2000 mm each,
            table replacing 2500 mm each (V-axis)
            * 3 clamping angles (2550x1200/2900x2200/2900x2300 mm)
            * angle milling head WFK 240/550, 25 kW drive
            * planer P 650 (U-axis) Ø 50-1500 mm
            * chip conveyor
            * measuring probe SK 50 RENISHAW
            * cooling system 4 nozzles and cooling through spindle
            * square support sleeve 325 x 325 mm (Z-axis 800 mm)
            * appr. 60 pcs. various tools and tools tapers
          Datasheet
          Request / Contact
          used Boring mills / Machining Centers / Drilling machines Ram-Type Floor Boring and Milling M/C Skoda W160HC


          • Jansen Machinehandel BV
          • Bredaseweg 210
          • 4873 LA Etten-leur
          • Niederlande

          • +31 (0) 76 5015750
            +31 (0) 76 5015750
          • info@jansenmachinehandel.nl
            www.jansenmachinehandel.nl
          #2049-KOT150 · Ram-Type Floor Boring and Milling M/C

          Skoda - W160HC - - 1990 -

          Technical details
          CNC brand Fagor ︱CNC model D.R.O. 3+3 axis ︱Spindle diameter 160 mm ø︱X 15000 mm︱Y 4000 mm︱Z 1600 mm︱W 1250 mm︱Spindle taper ISO 50 ︱Facing support 1000 mm ø︱Crooked milling head 3 pcs︱
          Equipped with ball screw spindles
            CNC brand Fagor
            CNC model D.R.O. 3+3 axis
            Spindle diameter 160 mm ø
            X 15000 mm
            Y 4000 mm
            Z 1600 mm
            W 1250 mm
            Spindle taper ISO 50
            Facing support 1000 mm ø
            Crooked milling head 3 pcs
            Description :
            Equipped with ball screw spindles


          Datasheet
          Request / Contact
          used Boring mills / Machining Centers / Drilling machines Ram-Type Floor Boring and Milling M/C SKODA W 160 HC


          • Intermach BV
          • Lange Voor 71
          • 8316BC Marknesse
          • Niederlande

          • +31 (0)527 201323
            +31 (0)527 203038
          • info@intermach.nl
            www.intermach.nl
          #2050-1210060 · Ram-Type Floor Boring and Milling M/C

          SKODA - W 160 HC - - 1990 -

          Technical details
          spindle diameter 160 mm︱x-travel 15000 mm︱y-travel 4000 mm︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱
          Stocknumber 1210060 Type of machine Floortype Boring machine Make SKODA Type W160HC Build in 1990 Spindle diameter 160 mm X-stroke (mm) 15.000 Y-stroke (mm) 4.000 Z-stroke (mm) 1.600 W-stroke 1.250 Tool Taper Iso 50 Additional information With 3 floorplates 1880x5615 mm en 3x 1880x6400 mm 3 millingheads and 1 support 1 rotarytable Skoda S-35 C, 35 ton 2800 x 3150 mm
            spindle diameter 160 mm
            x-travel 15000 mm
            y-travel 4000 mm
            Description :
            Stocknumber 1210060
            Type of machine Floortype Boring machine
            Make SKODA
            Type W160HC
            Build in 1990
            Spindle diameter 160 mm
            X-stroke (mm) 15.000
            Y-stroke (mm) 4.000
            Z-stroke (mm) 1.600
            W-stroke 1.250
            Tool Taper Iso 50


            Additional information
            With 3 floorplates 1880x5615 mm en 3x 1880x6400 mm
            3 millingheads and 1 support
            1 rotarytable Skoda S-35 C, 35 ton 2800 x 3150 mm

          Datasheet
          Request / Contact
          used Boring mills / Machining Centers / Drilling machines Ram-Type Floor Boring and Milling M/C COLGAR FRAL 50


          • Markus Hirsch GmbH
          • Niersweg 84
          • 47877 Willich
          • Deutschland

          • +49 2156 49894 12
            +49 2156 49894 10
          • hirsch@hirsch-maschinen.de
            www.hirsch-maschinen.de
          #1077-02746 · Ram-Type Floor Boring and Milling M/C

          COLGAR - FRAL 50 - - 1988 - Heidenhain

          Technical details
          spindle diameter 130 mm︱x-travel 10000 mm︱y-travel 3500 mm︱z-travel 1000 mm︱Control Heidenhain ︱type TNC 155 ︱workpiece weight 300 t︱turning speeds 1620 U/min︱spindle taper ISO 50 ︱One direction thrust bearing 2 ︱Angle head 2 ︱power capacity 76 kW︱Plate area 12000x9600 mm︱Thickness 450 mm︱rotary table: Colgar ︱type TRT1500 mm︱table surface area 2000x2500 mm︱Table load 20000 kg︱Travel 2000 mm︱total power requirement kW︱
          Panel is optional and we charged extra
            spindle diameter 130 mm
            x-travel 10000 mm
            y-travel 3500 mm
            z-travel 1000 mm
            Control Heidenhain
            type TNC 155
            workpiece weight 300 t
            turning speeds 1620 U/min
            spindle taper ISO 50
            One direction thrust bearing 2
            Angle head 2
            power capacity 76 kW
            Plate area 12000x9600 mm
            Thickness 450 mm
            rotary table: Colgar
            type TRT1500 mm
            table surface area 2000x2500 mm
            Table load 20000 kg
            Travel 2000 mm
            Description :
            Panel is optional and we charged extra
          Datasheet
          Request / Contact
          used Boring mills / Machining Centers / Drilling machines Ram-Type Floor Boring and Milling M/C COLGAR FRAL 50


          • Harry Vraets Machinery B.V.
          • Gezellenstraat 2
          • 3861RD Nijkerk
          • Niederlande

          • +31 (0)332452145
          • info@vraetsmachinery.com
            www.vraetsmachinery.com
          #2039-12538B · Ram-Type Floor Boring and Milling M/C

          COLGAR - FRAL 50 - - 1988 - Heidenhain

          Technical details
          spindle diameter 130 mm︱x-travel 10000 mm︱y-travel 3500 mm︱z-travel 1000 mm︱Control Heidenhain ︱type TNC 155 ︱workpiece weight 300 t︱turning speeds 1620 U/min︱spindle taper ISO 50 ︱One direction thrust bearing 2 ︱Angle head 2 ︱power capacity 76 kW︱Plate area 12000x9000 mm︱rotary table: Colgar ︱type TRT1500 mm︱table surface area 2000x2500 mm︱Table load 20000 kg︱Travel 2000 mm︱total power requirement kW︱weight of the machine ca. t︱
          Panel is optional and we charged extra
            spindle diameter 130 mm
            x-travel 10000 mm
            y-travel 3500 mm
            z-travel 1000 mm
            Control Heidenhain
            type TNC 155
            workpiece weight 300 t
            turning speeds 1620 U/min
            spindle taper ISO 50
            One direction thrust bearing 2
            Angle head 2
            power capacity 76 kW
            Plate area 12000x9000 mm
            rotary table: Colgar
            type TRT1500 mm
            table surface area 2000x2500 mm
            Table load 20000 kg
            Travel 2000 mm
            Description :
            Panel is optional and we charged extra
          Datasheet
          Request / Contact
          used Boring mills / Machining Centers / Drilling machines Ram-Type Floor Boring and Milling M/C SKODA W 160 HB-NC


          • Knops Werkzeugmaschinen
          • Ronsdorfer Str. 143
          • 40233 Düsseldorf
          • Deutschland

          • 0211 8793140
            0211 8793134
          • maschinen@knops.de
            www.knops.de
          #1022-E05735 · Ram-Type Floor Boring and Milling M/C

          SKODA - W 160 HB-NC - - 1987 - Siemens 850 M

          Technical details
          spindle diameter 160 mm︱x-travel 8000 mm︱y-travel 3000 mm︱Control Siemens 850 M ︱tool taper ISO 50 ︱dimension of the ram 450 x 450 mm︱ram stroke 1250 mm︱spindle stroke 1600 mm︱spindle turning speed range 1000 U/min︱max. torque on the spindle 8000 Nm︱main drive 52 kW︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. 15,5 x 11,5 x 5,0 m︱
          Equipment: NC-controlled rotary table Clamping surface 3150 x 3150 mm Table load max. 35 tons 2 pieces of panel fields each of 6400 x 1850 mm Additional accessories according to the attached photos.
            spindle diameter 160 mm
            x-travel 8000 mm
            y-travel 3000 mm
            Control Siemens 850 M
            tool taper ISO 50
            dimension of the ram 450 x 450 mm
            ram stroke 1250 mm
            spindle stroke 1600 mm
            spindle turning speed range 1000 U/min
            max. torque on the spindle 8000 Nm
            main drive 52 kW
            dimensions of the machine ca. 15,5 x 11,5 x 5,0 m
            Description :
            Equipment:
            NC-controlled rotary table
            Clamping surface 3150 x 3150 mm
            Table load max. 35 tons
            2 pieces of panel fields each of 6400 x 1850 mm
            Additional accessories according to the attached photos.
          Datasheet
          Request / Contact
          used Boring mills / Machining Centers / Drilling machines Ram-Type Floor Boring and Milling M/C TITAN-PAMA AFP 200


          • Kemmerich Werkzeugmaschinen GmbH
          • Im Rottfeld 1a
          • 40789 Monheim am Rhein
          • Deutschland

          • +49 2173 207474
            +49 2173 207473
          • info@kemmerich.biz
            www.kemmerich.biz
          #1020-14168 · Ram-Type Floor Boring and Milling M/C

          TITAN-PAMA - AFP 200 - - 1986/2004 - Siemens 840D

          Technical details
          spindle diameter 203,2 mm︱x-travel 9000 mm︱y-travel 3500 mm︱milling spindle diameter 335 mm︱spindle taper ISO 60 ︱spindle turning speed - stepless 1 - 450 / 5 - 1200 U/min︱w-axis 800 mm︱z-axis 1500 mm︱ 2300 mm︱rapid traverse X-axis 8000 m/min︱rapid motion - y-axis 6000 mm/min︱Rapid motion z/w 4000 mm/Min.︱Feed column (X-axis) 1 - 8000 mm/min.︱Infeed z/w 1 - 4000 mm/Min.︱Feed head stock (Y-axis) 1 - 6000 mm/min.︱dimension of the ram 530 x 600 mm︱Control Siemens 840D
          The horizontal boring and milling machine is equipped with ram and travelling column. It is geometrically rebuilt, and equipped with latest Siemens Electric & Sinumerik 840 D control - up to 8 axes - The AFP 200 is a robust boring mill of high stability. It offers a wide range of applications. The machine is preferably designed for milling, drilling and turning operations of large work pieces made from cast iron, steel, or other materials, both in roughing and finishing. The operations could be extended by different accessories. Hydrostatic guides of X- and Y-axes guarantee highest accuracies and long life time. Attachments: - CNC Control Siemens Sinumerik 840 D and Siemens Drives - renishaw Head - Hydrostatic guideways in X- and Y-axes - Telescopic cover for bed (X-axis) - Cumulated Z- and W-axes - Floor Plates (15 x 2,7m) - Angle Plates (upon request/extra payment) - NO rotary Table!!
            spindle diameter 203,2 mm
            x-travel 9000 mm
            y-travel 3500 mm
            milling spindle diameter 335 mm
            spindle taper ISO 60
            spindle turning speed - stepless 1 - 450 / 5 - 1200 U/min
            w-axis 800 mm
            z-axis 1500 mm
            2300 mm
            rapid traverse X-axis 8000 m/min
            rapid motion - y-axis 6000 mm/min
            Rapid motion z/w 4000 mm/Min.
            Feed column (X-axis) 1 - 8000 mm/min.
            Infeed z/w 1 - 4000 mm/Min.
            Feed head stock (Y-axis) 1 - 6000 mm/min.
            dimension of the ram 530 x 600 mm
            Control Siemens 840D
            Description :
            The horizontal boring and milling machine is equipped with ram and travelling
            column. It is geometrically rebuilt, and equipped with latest Siemens Electric
            & Sinumerik 840 D control - up to 8 axes -
            The AFP 200 is a robust boring mill of high stability. It offers a wide range
            of applications. The machine is preferably designed for milling, drilling and
            turning operations of large work pieces made from cast iron, steel, or other
            materials, both in roughing and finishing. The operations could be extended by
            different accessories. Hydrostatic guides of X- and Y-axes guarantee highest
            accuracies and long life time.

            Attachments:
            - CNC Control Siemens Sinumerik 840 D and Siemens Drives
            - renishaw Head
            - Hydrostatic guideways in X- and Y-axes
            - Telescopic cover for bed (X-axis)
            - Cumulated Z- and W-axes
            - Floor Plates (15 x 2,7m)
            - Angle Plates (upon request/extra payment)
            - NO rotary Table!!

          Datasheet
          Request / Contact
          used Boring mills / Machining Centers / Drilling machines Ram-Type Floor Boring and Milling M/C SKODA W160HA


          • Markus Hirsch GmbH
          • Niersweg 84
          • 47877 Willich
          • Deutschland

          • +49 2156 49894 12
            +49 2156 49894 10
          • hirsch@hirsch-maschinen.de
            www.hirsch-maschinen.de
          #1077-03255 · Ram-Type Floor Boring and Milling M/C

          SKODA - W160HA - - 1986 -

          Technical details
          spindle diameter 160 mm︱x-travel 6000 mm︱y-travel 2470 mm︱spindle travel 1600 mm︱dimension of the ram 450x450 mm︱ram: horizontal adjustment 1250 mm︱spindle taper ISO 50 ︱angular milling head 2470TOS ︱type ISO 16 ︱Table load 16000 kg︱surface area 2200x2200 mm︱longitudinal adjustment 1500 mm︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱
            spindle diameter 160 mm
            x-travel 6000 mm
            y-travel 2470 mm
            spindle travel 1600 mm
            dimension of the ram 450x450 mm
            ram: horizontal adjustment 1250 mm
            spindle taper ISO 50
            angular milling head 2470
            TOS
            type ISO 16
            Table load 16000 kg
            surface area 2200x2200 mm
            longitudinal adjustment 1500 mm
          Datasheet
          Request / Contact
          used Boring mills / Machining Centers / Drilling machines Ram-Type Floor Boring and Milling M/C HEYLIGENSTAEDT


          • Knops Werkzeugmaschinen
          • Ronsdorfer Str. 143
          • 40233 Düsseldorf
          • Deutschland

          • 0211 8793140
            0211 8793134
          • maschinen@knops.de
            www.knops.de
          #1022-H08378 · Ram-Type Floor Boring and Milling M/C

          HEYLIGENSTAEDT - - - 1986 - FAGOR 8055

          Technical details
          spindle diameter 250 mm︱x-travel 5000 mm︱y-travel 3000 mm︱Control FAGOR 8055 ︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱
          The machine is in excellent condition CNC control FAGOR 8055 (installed about 2 years ago) X-axis travel 5,000 mm Y-axis travel 3,000 mm Ram Ram 1,000 mm ram Stroke spindle 500 mm Diameter 250 mm sleeve Tool holder ISO 50 Power KW 35/40 Spindle speed max. 1600 rpm. Equipment: Clamping table 5000 x 1500 mm + 3 clamping tables 1200 x 1600 mm 3 clamping angles 700x3000 mm with T-slots, Moving operator platform Angular Vertical milling No.03 Cubic Front 970 x 1200 mm No.03 teams 700 x 3000 mm Many tool holders with milling cutters Dimensions: length x width x height 6.000 x 11.500 x 6.000 mm
            spindle diameter 250 mm
            x-travel 5000 mm
            y-travel 3000 mm
            Control FAGOR 8055
            Description :
            The machine is in excellent condition

            CNC control FAGOR 8055 (installed about 2 years ago)
            X-axis travel 5,000 mm
            Y-axis travel 3,000 mm
            Ram Ram 1,000 mm ram
            Stroke spindle 500 mm
            Diameter 250 mm sleeve
            Tool holder ISO 50
            Power KW 35/40
            Spindle speed max. 1600 rpm.

            Equipment:
            Clamping table 5000 x 1500 mm + 3 clamping tables 1200 x 1600 mm
            3 clamping angles 700x3000 mm with T-slots,
            Moving operator platform
            Angular
            Vertical milling
            No.03 Cubic Front 970 x 1200 mm
            No.03 teams 700 x 3000 mm
            Many tool holders with milling cutters


            Dimensions: length x width x height 6.000 x 11.500 x 6.000 mm
          Datasheet
          Request / Contact
          used Boring mills / Machining Centers / Drilling machines Ram-Type Floor Boring and Milling M/C SKODA W 200 HC


          • SK Maschinen-Service GmbH
          • Tackweg 4
          • 47918 Tönisvorst
          • Deutschland

          • 02151 79350
            02151 793535
          • info@sk-maschinen.de
            www.sk-maschinen.de
          #1038-80405 · Ram-Type Floor Boring and Milling M/C

          SKODA - W 200 HC - - 1983/1992 - Siemens 850

          Technical details
          spindle diameter 200 mm︱x-travel 6000 mm︱y-travel 3000 mm︱Control Siemens 850 ︱bore slide stroke 2000 mm︱ram stroke 1600 ︱dimension of the ram 520x520 mm︱taper ISO 60 ︱bore spindle turning speed range 1,6-630 U/min︱spindle motor 83 kW︱bore feed range 0,63-2500 mm/U︱milling feed range 0,63-5000 mm/min︱electrics - voltage/frequency 380/50 V/Hz︱total power requirement 100 kW︱weight of the machine ca. 80 t︱dimensions of the machine ca. 12x6x8,3 m︱
            spindle diameter 200 mm
            x-travel 6000 mm
            y-travel 3000 mm
            Control Siemens 850
            bore slide stroke 2000 mm
            ram stroke 1600
            dimension of the ram 520x520 mm
            taper ISO 60
            bore spindle turning speed range 1,6-630 U/min
            spindle motor 83 kW
            bore feed range 0,63-2500 mm/U
            milling feed range 0,63-5000 mm/min
            electrics - voltage/frequency 380/50 V/Hz
            total power requirement 100 kW
            weight of the machine ca. 80 t
            dimensions of the machine ca. 12x6x8,3 m
          Datasheet
          Request / Contact
          used Boring mills / Machining Centers / Drilling machines Ram-Type Floor Boring and Milling M/C JuaristiZ/W MDR 105 CNC


          • Jansen Machinehandel BV
          • Bredaseweg 210
          • 4873 LA Etten-leur
          • Niederlande

          • +31 (0) 76 5015750
            +31 (0) 76 5015750
          • info@jansenmachinehandel.nl
            www.jansenmachinehandel.nl
          #2049-KOT162 · Ram-Type Floor Boring and Milling M/C

          JuaristiZ/W - MDR 105 CNC - - 1983 -

          Technical details
          CNC brand Heidenhain ︱CNC model TNC 145 ︱Table length 1000 mm︱Table width 1000 mm︱Spindle diameter 105 mm ø︱X 1000 mm︱Y 1000 mm︱Z/W 1000 mm︱
            CNC brand Heidenhain
            CNC model TNC 145
            Table length 1000 mm
            Table width 1000 mm
            Spindle diameter 105 mm ø
            X 1000 mm
            Y 1000 mm
            Z/W 1000 mm
            Description :

          Datasheet
          Request / Contact
          used Boring mills / Machining Centers / Drilling machines Ram-Type Floor Boring and Milling M/C SKODA WD 160 CNC


          • Kemmerich Werkzeugmaschinen GmbH
          • Im Rottfeld 1a
          • 40789 Monheim am Rhein
          • Deutschland

          • +49 2173 207474
            +49 2173 207473
          • info@kemmerich.biz
            www.kemmerich.biz
          #1020-17677 · Ram-Type Floor Boring and Milling M/C

          SKODA - WD 160 CNC - - 1982/2006 - MEFI 859

          Technical details
          spindle diameter 160 mm︱x-travel 3150 mm︱y-travel 2000 mm︱ram-type - ram dia. 450 x 450 mm︱Werkzeugaufnahme metr. ︱drilling depth in one stroke 1600 mm︱ram stroke 1250 mm︱bore spindle turning speed range 2 - 2800 U/min︱bore feed range 0,5 - 1600 mm/min︱milling feed range 1 - 3200 mm/min︱rapid traverse: longitudinal and cross 3200 mm/min︱rapid traverse of boring spindle 1600 m/min︱Control MEFI 859 ︱total power requirement 80 kW︱weight of the machine ca. 37 t︱dimensions of the machine ca. - m︱
          machine was rebuilt in 2006 to the CNC control including a complete new wiring equipped with: - CNC Control MEFI 859 (CZ) - Rotary Table TOS ISO 16 (2200 x 2200mm - 16t)- coventional - No Floor Plates
            spindle diameter 160 mm
            x-travel 3150 mm
            y-travel 2000 mm
            ram-type - ram dia. 450 x 450 mm
            drilling depth in one stroke 1600 mm
            ram stroke 1250 mm
            bore spindle turning speed range 2 - 2800 U/min
            bore feed range 0,5 - 1600 mm/min
            milling feed range 1 - 3200 mm/min
            rapid traverse: longitudinal and. 3200 mm/min
            rapid traverse of boring spindle 1600 m/min
            Control MEFI 859
            total power requirement 80 kW
            weight of the machine ca. 37 t
            dimensions of the machine ca. - m
            Description :
            machine was rebuilt in 2006 to the CNC control including a complete new wiring
            equipped with:
            - CNC Control MEFI 859 (CZ)
            - Rotary Table TOS ISO 16 (2200 x 2200mm - 16t)- coventional
            - No Floor Plates
          Datasheet
          Request / Contact

          TOP Manufacturer:

          WOTAN - SCHIESS -