European network of stockholding machinery dealers

Category:
    Manufacturer:
      Machines:
        Trader:

          Pillar Drilling Machine

          Machinelist: Pillar Drilling Machine


          Pillar Drilling Machine

          used Boring mills / Machining Centers / Drilling machines Pillar Drilling Machine IXION BS 15 ST


          • Plum & Partner Werkzeugmaschinen GmbH
          • Winkelstraße 32
          • 32257 Bünde
          • Deutschland

          • +49 05223 574444
            +49 5223188330
          • info@plum-maschinen.de
            www.plum-maschinen.de
          #1082-12169 · Pillar Drilling Machine

          IXION - BS 15 ST - - unbekannt -

          Technical details
          bore capacity in steel (diameter) 18 / 15 mm︱throat 215 mm︱bore stroke 90 mm︱spindle cone MT 2 ︱distance spindle /table max. 820 mm︱table-size 220 x 310 mm︱column diameter 75 mm︱speeds infinitely variable 400 - 3600 U/min.︱total power requirement 0,72 kW︱weight of the machine ca. 120 kg︱dimensions of the machine ca. 0,32 x 0,7 x 1,8 m︱Electric 380 Volt ︱Boring chuck Röhm Spiro 1-13 ︱Base plate bearbeitet
          Machine dealer with own stock of 2500 m².
            bore capacity in steel (diameter. 18 / 15 mm
            throat 215 mm
            bore stroke 90 mm
            spindle cone MT 2
            distance spindle /table max. 820 mm
            table-size 220 x 310 mm
            column diameter 75 mm
            speeds infinitely variable 400 - 3600 U/min.
            total power requirement 0,72 kW
            weight of the machine ca. 120 kg
            dimensions of the machine ca. 0,32 x 0,7 x 1,8 m
            Boring chuck Röhm Spiro 1-13
            Base plate bearbeitet
            Description :
            Machine dealer with own stock of 2500 m².
          Datasheet
          Request / Contact
          used Boring mills / Machining Centers / Drilling machines Pillar Drilling Machine SOLID BV35


          • WeMa Antonius Pigge GmbH
          • Barnstorfer Str. 3
          • 49424 Goldenstedt
          • Deutschland

          • +49 (0)444496700
            +49 (0)4444967010
          • info@wema-pigge.de
            www.wema-pigge.de
          #2031-3174 · Pillar Drilling Machine

          SOLID - BV35 - - unbekannt -

          Technical details
          bore capacity in steel (diameter) 35 mm︱throat 340 mm︱bore stroke 180 mm︱tool taper MK 4 ︱turning speed range - stepless 45 - 1400 U/min︱feed stepless 0,04 - 0,35 mm/U︱motor speeds: 3 ︱table-size 500 x 500 mm︱weight of the machine ca. 900 kg︱dimensions of the machine ca. 1000 x 500 x 1950 mm︱
          inkl. working light function not tested
            bore capacity in steel (diameter. 35 mm
            throat 340 mm
            bore stroke 180 mm
            tool taper MK 4
            turning speed range - stepless 45 - 1400 U/min
            feed stepless 0,04 - 0,35 mm/U
            motor speeds: 3
            table-size 500 x 500 mm
            weight of the machine ca. 900 kg
            dimensions of the machine ca. 1000 x 500 x 1950 mm
            Description :
            inkl. working light

            function not tested
          Datasheet
          Request / Contact
          used Boring mills / Machining Centers / Drilling machines Pillar Drilling Machine GILLARDON GB20


          • ATMH Werkzeugmaschinenhandel GmbH
          • Scharpenbergerstr.96-98
          • 58256 Ennepetal
          • Deutschland

          • +49 (0) 2333 / 403 43 70
            +49 (0) 2333 / 403 43 75
          • info@atmh.de
            www.atmh.de
          #2065-A36566 · Pillar Drilling Machine

          GILLARDON - GB20 - - unbekannt -

          Technical details
          bore capacity in steel (diameter) / mm︱throat 150 mm︱bore stroke max. 110 mm︱total power requirement 0,5/0,9 kW︱weight of the machine ca. / t︱
            bore capacity in steel (diameter. / mm
            throat 150 mm
            bore stroke max. 110 mm
            total power requirement 0,5/0,9 kW
            weight of the machine ca. / t
          Datasheet
          Request / Contact
          used Boring mills / Machining Centers / Drilling machines Pillar Drilling Machine OPTIMUM Opti drill B28 H vario


          • WeMa Antonius Pigge GmbH
          • Barnstorfer Str. 3
          • 49424 Goldenstedt
          • Deutschland

          • +49 (0)444496700
            +49 (0)4444967010
          • info@wema-pigge.de
            www.wema-pigge.de
          #2031-3521 · Pillar Drilling Machine

          OPTIMUM - Opti drill B28 H vario - - unbekannt -

          Technical details
          bore capacity in steel (diameter) 28 mm︱throat 200 mm︱bore stroke 105 mm︱spindle taper MK 3 ︱number of spindle speeds 12 ︱spindle speed: 35 - 5600 Upm︱column diameter 92 mm︱table-size 340 x 360 mm︱table rotating 360 °︱total power requirement 1,5 kW︱weight of the machine ca. ca. 170 kg︱dimensions of the machine ca. ca. 750 x 500 x 1800 mm︱
            bore capacity in steel (diameter. 28 mm
            throat 200 mm
            bore stroke 105 mm
            spindle taper MK 3
            number of spindle speeds 12
            spindle speed: 35 - 5600 Upm
            column diameter 92 mm
            table-size 340 x 360 mm
            table rotating 360 °
            total power requirement 1,5 kW
            weight of the machine ca. ca. 170 kg
            dimensions of the machine ca. ca. 750 x 500 x 1800 mm
          Datasheet
          Request / Contact
          used Boring mills / Machining Centers / Drilling machines Pillar Drilling Machine IXION BS 23 FST


          • WeMa Antonius Pigge GmbH
          • Barnstorfer Str. 3
          • 49424 Goldenstedt
          • Deutschland

          • +49 (0)444496700
            +49 (0)4444967010
          • info@wema-pigge.de
            www.wema-pigge.de
          #2031-3469 · Pillar Drilling Machine

          IXION - BS 23 FST - - unbekannt -

          Technical details
          bore capacity in steel (diameter) 23 / 28 mm︱throat 260 mm︱bore stroke 120 mm︱tool taper MK 3 ︱table-size 500 x 350 mm︱column diameter 100 mm︱total power requirement 1,3 kW︱weight of the machine ca. 400 kg︱dimensions of the machine ca. 800 x 600 x 1750 mm︱
            bore capacity in steel (diameter. 23 / 28 mm
            throat 260 mm
            bore stroke 120 mm
            tool taper MK 3
            table-size 500 x 350 mm
            column diameter 100 mm
            total power requirement 1,3 kW
            weight of the machine ca. 400 kg
            dimensions of the machine ca. 800 x 600 x 1750 mm
          Datasheet
          Request / Contact
          used Boring mills / Machining Centers / Drilling machines Pillar Drilling Machine FLOTT SB 23


          • WeMa Antonius Pigge GmbH
          • Barnstorfer Str. 3
          • 49424 Goldenstedt
          • Deutschland

          • +49 (0)444496700
            +49 (0)4444967010
          • info@wema-pigge.de
            www.wema-pigge.de
          #2031-3522 · Pillar Drilling Machine

          FLOTT - SB 23 - - unbekannt -

          Technical details
          bore capacity in steel (diameter) 23 mm︱throat 300 mm︱bore stroke 150 mm︱table-size 300 x 410 mm︱spindle taper MK 2 ︱total power requirement 1,4 kW︱weight of the machine ca. ca. 315 kg︱dimensions of the machine ca. ca. 700 x 900 x 1900 mm︱
            bore capacity in steel (diameter. 23 mm
            throat 300 mm
            bore stroke 150 mm
            table-size 300 x 410 mm
            spindle taper MK 2
            total power requirement 1,4 kW
            weight of the machine ca. ca. 315 kg
            dimensions of the machine ca. ca. 700 x 900 x 1900 mm
          Datasheet
          Request / Contact
          used Boring mills / Machining Centers / Drilling machines Pillar Drilling Machine ALZMETALL Alzstar 40/SV


          • WMT GmbH & Co.KG
          • Siemensstraße 1
          • 46342 Velen-Ramsdorf
          • Deutschland

          • +49 2863 92477-47
            +49 2863 92477-50
          • info@w-m-t.de
            www.w-m-t.de
          #1108-76270 · Pillar Drilling Machine

          ALZMETALL - Alzstar 40/SV - - Neu -

          Technical details
          Drilling capacity in St 60 40 mm︱threading in St 60 M 24 mm︱threading in GG 20 M 30 ︱bore stroke 120 mm︱Short spindle MK 3 ︱throat 293 mm︱column diameter 115 mm︱Machine table - usable table surface 514 x 360 mm︱T-Slots Amount - Width - Distance 2 x 14 x 224 mm︱Distance spindle - machine table min./max. 117 / 701 mm︱feed 0,10 + 0,20 mm/U︱spindle turning speed range 160 - 2250 UpM︱total power requirement 1,45 / 1,9 kW︱height of the machine 1840 mm︱weight of the machine ca. 285 kg︱
          Standard equipment: - Mushroom pushbutton (latching) for EMERGENCY STOP - Reversing switch for right-left rotation - Motor protection switch - Speed adjustment stepless - Speed display digital - Feed overload protection - Protection IP 54 - Connector (fully assembled, cable length 2 m) - Spindle protection with electrical protection Pos. 25 Coolant device B, consisting of: separate container (33l), Pump with motor protection switch, complete fitting
            Drilling capacity in St 60 40 mm
            threading in St 60 M 24 mm
            threading in GG 20 M 30
            bore stroke 120 mm
            Short spindle MK 3
            throat 293 mm
            column diameter 115 mm
            Machine table - usable table sur. 514 x 360 mm
            T-Slots Amount - Width - Distanc. 2 x 14 x 224 mm
            Distance spindle - machine table. 117 / 701 mm
            feed 0,10 + 0,20 mm/U
            spindle turning speed range 160 - 2250 UpM
            total power requirement 1,45 / 1,9 kW
            height of the machine 1840 mm
            weight of the machine ca. 285 kg
            Description :
            Standard equipment:
            - Mushroom pushbutton (latching) for EMERGENCY STOP
            - Reversing switch for right-left rotation
            - Motor protection switch
            - Speed adjustment stepless
            - Speed display digital
            - Feed overload protection
            - Protection IP 54
            - Connector (fully assembled, cable length 2 m)
            - Spindle protection with electrical protection

            Pos. 25
            Coolant device B, consisting of: separate container (33l),
            Pump with motor protection switch, complete fitting
          Datasheet
          Request / Contact
          used Boring mills / Machining Centers / Drilling machines Pillar Drilling Machine HUVEMA HU 45-4 Industry


          • Heinz Sanders GmbH
          • Fresenburger Weg 4
          • 49779 Niederlangen
          • Deutschland

          • +49 (0) 5939 9406 40
            +49 (0) 5939 9406 50
          • maschinen@heinz-sanders.de
            www.heinz-sanders.de
          #1125-9359110 · Pillar Drilling Machine

          HUVEMA - HU 45-4 Industry - - NEU -

          Technical details
          40 mm︱ 220 mm︱ 100 mm︱ 8 Stufen / Steps105 - 1257 U/min︱ 95 mm︱ 1,8 kW︱ 0,3 t︱ 2,05 x 1,03 x 0,6 m︱
            40 mm
            220 mm
            100 mm
            8 Stufen / Steps
            105 - 1257 U/min
            95 mm
            1,8 kW
            0,3 t
            2,05 x 1,03 x 0,6 m
          Datasheet
          Request / Contact
          used Boring mills / Machining Centers / Drilling machines Pillar Drilling Machine ALZMETALL AB 40 / SV


          • Heinz Sanders GmbH
          • Fresenburger Weg 4
          • 49779 Niederlangen
          • Deutschland

          • +49 (0) 5939 9406 40
            +49 (0) 5939 9406 50
          • maschinen@heinz-sanders.de
            www.heinz-sanders.de
          #1125-4815 · Pillar Drilling Machine

          ALZMETALL - AB 40 / SV - - NEU -

          Technical details
          bore capacity in steel (diameter) 40 mm︱throat 300 mm︱bore stroke 160 mm︱threading cutting capacity: M30 ︱spindle taper MT 4 ︱table surface area 615 x 430 mm︱column diameter 145 mm︱total power requirement 1,8 / 2,9 kW︱weight of the machine ca. 0,5 t︱
            bore capacity in steel (diameter. 40 mm
            throat 300 mm
            bore stroke 160 mm
            threading cutting capacity: M30
            spindle taper MT 4
            table surface area 615 x 430 mm
            column diameter 145 mm
            total power requirement 1,8 / 2,9 kW
            weight of the machine ca. 0,5 t
          Datasheet
          Request / Contact
          used Boring mills / Machining Centers / Drilling machines Pillar Drilling Machine ALZMETALL AX 3 iTRONIC-V


          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland

          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-2010501 · Pillar Drilling Machine

          ALZMETALL - AX 3 iTRONIC-V - - Neu -

          Technical details
          40 mm︱ M 24M 30MK 3 ︱spindle turning speed - stepless 160-2250 U/min︱spindle stroke 120 mm︱throat 293 mm︱column diameter 115 mm︱ 514x360 mm︱distance spindle /table min./max. 117/701 mm︱ 2 x 14 x 224 mm︱feed 0,1 + 0,2 mm/U︱drive motor 1,45/1,9 kW︱Machine height 1840 mm︱weight 270 kg︱
          Standard equipment: 7 "TFT - LCD display with touch function: manual input of spindle speed Setpoint, actual speed display, integrated drilling depth display with touch Zero point transfer, virtual drilling depth scale in the display, machine Status displays and warnings in the display, service information, selectable User language: DE / EN / FR / ES / IT / NL / RU - Thread cutting device, for thread cutting with stop, max. 6 threads / min (thread cutting performance dependent on the spindle speed), thread depth adjustable via depth stop and in the TFT - LCD display (4 tools) - Infinitely variable speed setting by means of an adjusting lever - Spindle protection with electrical protection - Three separate buttons for clockwise - counterclockwise - stop - Mushroom pushbutton (latching) for EMERGENCY STOP - Main switch, lockable - Right and left rotation by contactor control - Control voltage 24 volts - Protection class IP 54 - Painting: DD structured paint signal white RAL 9003, PANTONE 7545c, black - Feed overload protection with AX 3 iTRONIC-V - Machine oil first filling: oil bottle, loose delivery; only for AX 3 iTRONIC-V Item 12 LED machine lamp, with radially adjustable light beam, protection class IP 65, additional switching functions in the display, connection voltage 24 V Item 25 Coolant system B, consisting of: separate container (33 l), pump with motor protection switch, complete fitting, non-return valve, switching functions for coolant supply Item 37.5 Technology computer in the display. The technology computer guides you through the machining task. Determination of the cutting data via the following parameters: manufacturing process, tool diameter, cutting speed, material table, transfer function of the spindle speed as Setpoint Item 37.6 Maximum drilling depth display as a measuring function for the current drilling depth Item 50.6 Drilling depth fine adjustment and fixed stop setting value 0.1 mm
            40 mm
            M 24
            M 30
            MK 3
            spindle turning speed - stepless 160-2250 U/min
            spindle stroke 120 mm
            throat 293 mm
            column diameter 115 mm
            514x360 mm
            distance spindle /table min./max. 117/701 mm
            2 x 14 x 224 mm
            feed 0,1 + 0,2 mm/U
            drive motor 1,45/1,9 kW
            Machine height 1840 mm
            weight 270 kg
            Description :
            Standard equipment:
            7 "TFT - LCD display with touch function: manual input of spindle speed
            Setpoint, actual speed display, integrated drilling depth display with touch
            Zero point transfer, virtual drilling depth scale in the display, machine
            Status displays and warnings in the display, service information, selectable
            User language: DE / EN / FR / ES / IT / NL / RU

            - Thread cutting device, for thread cutting with stop, max. 6 threads / min (thread cutting performance dependent on the spindle speed), thread depth adjustable via depth stop
            and in the TFT - LCD display (4 tools)
            - Infinitely variable speed setting by means of an adjusting lever
            - Spindle protection with electrical protection
            - Three separate buttons for clockwise - counterclockwise - stop
            - Mushroom pushbutton (latching) for EMERGENCY STOP
            - Main switch, lockable
            - Right and left rotation by contactor control
            - Control voltage 24 volts
            - Protection class IP 54
            - Painting: DD structured paint signal white RAL 9003, PANTONE 7545c, black
            - Feed overload protection with AX 3 iTRONIC-V
            - Machine oil first filling: oil bottle, loose delivery; only for AX 3 iTRONIC-V

            Item 12
            LED machine lamp, with radially adjustable light beam, protection class IP 65,
            additional switching functions in the display, connection voltage 24 V

            Item 25
            Coolant system B, consisting of: separate container (33 l), pump with motor protection switch, complete fitting, non-return valve, switching functions for coolant supply

            Item 37.5
            Technology computer in the display. The technology computer guides you through the machining task.
            Determination of the cutting data via the following parameters: manufacturing process, tool diameter, cutting speed, material table, transfer function of the spindle speed as
            Setpoint

            Item 37.6
            Maximum drilling depth display as a measuring function for the current drilling depth

            Item 50.6
            Drilling depth fine adjustment and fixed stop setting value 0.1 mm
          Datasheet
          Request / Contact
          used Boring mills / Machining Centers / Drilling machines Pillar Drilling Machine ALZMETALL AB 26 iTRONIC


          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland

          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-2010523 · Pillar Drilling Machine

          ALZMETALL - AB 26 iTRONIC - - Neu -

          Technical details
          26 mm︱ 30 mm︱ 30 mm︱threading in St 60 M 20 ︱threading in GG 20 M 24MK 3120-2.200 U/min.︱throat 293 mm︱ 514x360 mm︱ 2 x 14 x 224 mm︱ 90/675 mm︱column diameter 115 mm︱spindle stroke 160 mm︱feeds 0,1-0,2-0,3-0,4 mm/U︱total power requirement 1,0/1,6 kW︱Machine height 1865 mm︱weight 380 kg︱
          Standard equipment: 7 "" TFT LCD display with touch function: manual input of spindle speed Setpoint, actual speed display, integrated drilling depth display with touch Zero point transfer, virtual drilling depth scale in the display, machine Status displays and warnings in the display, service information, selectable User language: DE / EN / FR / ES / IT / NL / RU - Thread cutting device, for thread cutting with stop, max. 6th Thread / min (thread cutting performance dependent on spindle speed), thread depth adjustable via depth stop and in the TFT - LCD display (4 tools) - Infinitely variable speed setting by means of an adjusting lever - Spindle protection with electrical protection - Three separate buttons for clockwise - counterclockwise - stop - Mushroom pushbutton (latching) for EMERGENCY STOP - Main switch, lockable - Right and left rotation by contactor control - Control voltage 24 volts - Protection class IP 54 - Painting: DD structured paint signal white RAL 9003, PANTONE 7545c, black - Electromagnetic feed clutch with overload protection and electrical comfort cross-handle switch - Machine oil first filling: oil bottle, loose delivery Pos. 20.5 Foot switch, in addition to the thread cutting device for switching the Spindle direction of rotation in the process Pos. 37.5 Technology computer in the display. The technology computer guides you through the Machining task. Determination of the cutting data using the following parameters: Manufacturing process, tool diameter, cutting speed, Material table, transfer function of the spindle speed as setpoint
            26 mm
            30 mm
            30 mm
            threading in St 60 M 20
            threading in GG 20 M 24
            MK 3
            120-2.200 U/min.
            throat 293 mm
            514x360 mm
            2 x 14 x 224 mm
            90/675 mm
            column diameter 115 mm
            spindle stroke 160 mm
            feeds 0,1-0,2-0,3-0,4 mm/U
            total power requirement 1,0/1,6 kW
            Machine height 1865 mm
            weight 380 kg
            Description :
            Standard equipment:
            7 "" TFT LCD display with touch function: manual input of spindle speed
            Setpoint, actual speed display, integrated drilling depth display with touch
            Zero point transfer, virtual drilling depth scale in the display, machine
            Status displays and warnings in the display, service information, selectable
            User language: DE / EN / FR / ES / IT / NL / RU

            - Thread cutting device, for thread cutting with stop, max. 6th
            Thread / min (thread cutting performance dependent on spindle speed), thread depth
            adjustable via depth stop and in the TFT - LCD display (4 tools)
            - Infinitely variable speed setting by means of an adjusting lever
            - Spindle protection with electrical protection
            - Three separate buttons for clockwise - counterclockwise - stop
            - Mushroom pushbutton (latching) for EMERGENCY STOP
            - Main switch, lockable
            - Right and left rotation by contactor control
            - Control voltage 24 volts
            - Protection class IP 54
            - Painting: DD structured paint signal white RAL 9003, PANTONE 7545c, black
            - Electromagnetic feed clutch with overload protection and electrical comfort cross-handle switch
            - Machine oil first filling: oil bottle, loose delivery

            Pos. 20.5
            Foot switch, in addition to the thread cutting device for switching the
            Spindle direction of rotation in the process

            Pos. 37.5
            Technology computer in the display. The technology computer guides you through the
            Machining task. Determination of the cutting data using the following parameters:
            Manufacturing process, tool diameter, cutting speed, Material table, transfer function of the spindle speed as setpoint
          Datasheet
          Request / Contact
          used Boring mills / Machining Centers / Drilling machines Pillar Drilling Machine ALZMETALL Alzstar 40 iTRONIC-V


          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland

          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-2010502 · Pillar Drilling Machine

          ALZMETALL - Alzstar 40 iTRONIC-V - - Neu -

          Technical details
          Drilling capacity in St 60 40 mm︱threading in St 60 M 24 ︱threading in GG 20 M 30 ︱Short spindle MK 3 ︱bore stroke 120 mm︱throat 293 mm︱column diameter 115 mm︱Machine table - usable table surface 514x360 mm︱T-Slots Amount - Width - Distance 2 x 14 x 224 mm︱Distance spindle - machine table min./max. 117/701 mm︱feed 0,10 + 0,20 mm/U︱spindle turning speed range 160-2.250 UpM︱total power requirement 1,45/1,9 kW︱weight of the machine ca. 285 kg︱height of the machine 1840 mm︱
          Standard equipment: 7 "TFT - LCD display with touch function: manual input of spindle speed Setpoint, speed display actual value, integrated drilling depth display with touch Zero point transfer, virtual drilling depth scale in the display, machine Status displays and warnings in the display, service information, selectable User language: DE / EN / FR / ES / IT / NL / RU Pos. 37.5 Technology computer in the display. The technology computer guides you through the machining task. Determination of the cutting data using the following parameters: manufacturing process, tool diameter, cutting speed, material table, transfer function of the spindle speed as setpoint
            Drilling capacity in St 60 40 mm
            threading in St 60 M 24
            threading in GG 20 M 30
            Short spindle MK 3
            bore stroke 120 mm
            throat 293 mm
            column diameter 115 mm
            Machine table - usable table sur. 514x360 mm
            T-Slots Amount - Width - Distanc. 2 x 14 x 224 mm
            Distance spindle - machine table. 117/701 mm
            feed 0,10 + 0,20 mm/U
            spindle turning speed range 160-2.250 UpM
            total power requirement 1,45/1,9 kW
            weight of the machine ca. 285 kg
            height of the machine 1840 mm
            Description :
            Standard equipment:
            7 "TFT - LCD display with touch function: manual input of spindle speed
            Setpoint, speed display actual value, integrated drilling depth display with touch
            Zero point transfer, virtual drilling depth scale in the display, machine
            Status displays and warnings in the display, service information, selectable
            User language: DE / EN / FR / ES / IT / NL / RU

            Pos. 37.5
            Technology computer in the display. The technology computer guides you through the machining task. Determination of the cutting data using the following parameters: manufacturing process, tool diameter, cutting speed, material table, transfer function of the spindle speed as setpoint
          Datasheet
          Request / Contact
          used Boring mills / Machining Centers / Drilling machines Pillar Drilling Machine ALZMETALL Alzstar 30/S


          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland

          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-2010227 · Pillar Drilling Machine

          ALZMETALL - Alzstar 30/S - - Neu -

          Technical details
          Drilling capacity in St 60 30 mm︱threading in St 60 M 16 ︱threading in GG 20 M 20 ︱Short spindle MK 3 ︱bore stroke 140 mm︱throat 293 mm︱column diameter 115 mm︱Machine table - usable table surface 514x360 mm︱T-Slots Amount - Width - Distance 2 x 14 x 224 mm︱Distance spindle - machine table min./max. 132/724 mm︱feed Hand ︱spindle turning speed range 225-4300 UpM︱height of the machine 1790 mm︱total power requirement 1,0/1,6 kW︱weight of the machine ca. 260 kg︱
          Standard equipment: - Mushroom pushbutton (latching) for EMERGENCY STOP - Reversing switch for right-left rotation - Motor protection switch - Speed adjustment stepless - Speed display digital - Protection IP 54 - Connector (fully assembled, cable length 2 m) - Spindle protection with electrical protection
            Drilling capacity in St 60 30 mm
            threading in St 60 M 16
            threading in GG 20 M 20
            Short spindle MK 3
            bore stroke 140 mm
            throat 293 mm
            column diameter 115 mm
            Machine table - usable table sur. 514x360 mm
            T-Slots Amount - Width - Distanc. 2 x 14 x 224 mm
            Distance spindle - machine table. 132/724 mm
            feed Hand
            spindle turning speed range 225-4300 UpM
            height of the machine 1790 mm
            total power requirement 1,0/1,6 kW
            weight of the machine ca. 260 kg
            Description :
            Standard equipment:
            - Mushroom pushbutton (latching) for EMERGENCY STOP
            - Reversing switch for right-left rotation
            - Motor protection switch
            - Speed adjustment stepless
            - Speed display digital
            - Protection IP 54
            - Connector (fully assembled, cable length 2 m)
            - Spindle protection with electrical protection
          Datasheet
          Request / Contact
          used Boring mills / Machining Centers / Drilling machines Pillar Drilling Machine ALZMETALL Alzstar 40/SV


          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland

          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-2010516 · Pillar Drilling Machine

          ALZMETALL - Alzstar 40/SV - - Neu -

          Technical details
          Drilling capacity in St 60 40 mm︱threading in St 60 M 24 mm︱threading in GG 20 M 30 ︱bore stroke 120 mm︱Short spindle MK 3 ︱throat 293 mm︱column diameter 115 mm︱Machine table - usable table surface 514x360 mm︱T-Slots Amount - Width - Distance 2 x 14 x 224 mm︱Distance spindle - machine table min./max. 117/701 mm︱feed 0,10 + 0,20 mm/U︱spindle turning speed range 160-2.250 UpM︱total power requirement 1,45/1,9 kW︱weight of the machine ca. 285 kg︱height of the machine 1840 mm︱
          Standard equipment: - Mushroom pushbutton (latching) for EMERGENCY STOP - Reversing switch for right-left rotation - Motor protection switch - Speed adjustment stepless - Speed display digital - Feed overload protection - Protection IP 54 - Connector (fully assembled, cable length 2 m) - Spindle protection with electrical protection Pos. 25 Coolant device B, consisting of: separate container (33l), Pump with motor protection switch, complete fitting
            Drilling capacity in St 60 40 mm
            threading in St 60 M 24 mm
            threading in GG 20 M 30
            bore stroke 120 mm
            Short spindle MK 3
            throat 293 mm
            column diameter 115 mm
            Machine table - usable table sur. 514x360 mm
            T-Slots Amount - Width - Distanc. 2 x 14 x 224 mm
            Distance spindle - machine table. 117/701 mm
            feed 0,10 + 0,20 mm/U
            spindle turning speed range 160-2.250 UpM
            total power requirement 1,45/1,9 kW
            weight of the machine ca. 285 kg
            height of the machine 1840 mm
            Description :
            Standard equipment:
            - Mushroom pushbutton (latching) for EMERGENCY STOP
            - Reversing switch for right-left rotation
            - Motor protection switch
            - Speed adjustment stepless
            - Speed display digital
            - Feed overload protection
            - Protection IP 54
            - Connector (fully assembled, cable length 2 m)
            - Spindle protection with electrical protection

            Pos. 25
            Coolant device B, consisting of: separate container (33l),
            Pump with motor protection switch, complete fitting
          Datasheet
          Request / Contact
          used Boring mills / Machining Centers / Drilling machines Pillar Drilling Machine ALZMETALL AB 40 iTRONIC


          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland

          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-2010510 · Pillar Drilling Machine

          ALZMETALL - AB 40 iTRONIC - - Neu -

          Technical details
          40 mm︱bore capacity in cast iron 46 mm︱ 50 mm︱ M 30M36MK 4 ︱throat 300 mm︱ 615x430 mm︱ 100-1600 U/min.︱ 2x14x224 mm︱Distance spindle/table max. 147/688 mm︱column diameter 145 mm︱spindle stroke 160 mm︱feeds 0,1-0,2-0,3-0,4 mm/U︱height of the machine 1885 mm︱drive motor 1,8/2,9 kW︱weight of the machine ca. 450 kg︱
            40 mm
            bore capacity in cast iron 46 mm
            50 mm
            M 30
            M36
            MK 4
            throat 300 mm
            615x430 mm
            100-1600 U/min.
            2x14x224 mm
            Distance spindle/table max. 147/688 mm
            column diameter 145 mm
            spindle stroke 160 mm
            feeds 0,1-0,2-0,3-0,4 mm/U
            height of the machine 1885 mm
            drive motor 1,8/2,9 kW
            weight of the machine ca. 450 kg
            Description :

          Datasheet
          Request / Contact
          used Boring mills / Machining Centers / Drilling machines Pillar Drilling Machine IBERDRILL Falken AZ 34


          • Heinz Sanders GmbH
          • Fresenburger Weg 4
          • 49779 Niederlangen
          • Deutschland

          • +49 (0) 5939 9406 40
            +49 (0) 5939 9406 50
          • maschinen@heinz-sanders.de
            www.heinz-sanders.de
          #1125-1915 · Pillar Drilling Machine

          IBERDRILL - Falken AZ 34 - - NEU -

          Technical details
          bore capacity in steel (diameter) 34 mm︱throat 300 mm︱bore stroke 150 mm︱bore capacity in cast iron (diameter) 40 mm︱thread capacity M 27 ︱spindle taper MT 4 ︱spindle speeds: Stufenlos 100 - 2000 U/min︱column diameter 125 mm︱automatic feeds 3 / 0,1 - 0,2 - 1,3 ︱table: 400 x 420 mm︱Drive Keilriemen ︱total power requirement 3 kW︱weight of the machine ca. 360 kg︱dimensions of the machine ca. 2,3 x 0,6x 1,1 m︱
            bore capacity in steel (diameter. 34 mm
            throat 300 mm
            bore stroke 150 mm
            bore capacity in cast iron (diam. 40 mm
            thread capacity M 27
            spindle taper MT 4
            spindle speeds: Stufenlos 100 - 2000 U/min
            column diameter 125 mm
            automatic feeds 3 / 0,1 - 0,2 - 1,3
            table: 400 x 420 mm
            Drive Keilriemen
            total power requirement 3 kW
            weight of the machine ca. 360 kg
            dimensions of the machine ca. 2,3 x 0,6x 1,1 m
          Datasheet
          Request / Contact
          used Boring mills / Machining Centers / Drilling machines Pillar Drilling Machine ALZMETALL ALZSTAR 40 iTRONIC - V


          • Heinz Sanders GmbH
          • Fresenburger Weg 4
          • 49779 Niederlangen
          • Deutschland

          • +49 (0) 5939 9406 40
            +49 (0) 5939 9406 50
          • maschinen@heinz-sanders.de
            www.heinz-sanders.de
          #1125-7192 · Pillar Drilling Machine

          ALZMETALL - ALZSTAR 40 iTRONIC - V - - NEU -

          Technical details
          bore capacity in steel (diameter) 40 mm︱throat 293 mm︱bore stroke 120 mm︱spindle taper MT 3 ︱column diameter 115 mm︱table surface area 514 x 360 mm︱spindle turning speed - stepless 160 - 2250 U/min︱total power requirement 1,45 / 1,90 kW︱weight of the machine ca. 285 kg︱dimensions of the machine ca. H: 1840 mm︱
            bore capacity in steel (diameter. 40 mm
            throat 293 mm
            bore stroke 120 mm
            spindle taper MT 3
            column diameter 115 mm
            table surface area 514 x 360 mm
            spindle turning speed - stepless 160 - 2250 U/min
            total power requirement 1,45 / 1,90 kW
            weight of the machine ca. 285 kg
            dimensions of the machine ca. H: 1840 mm
          Datasheet
          Request / Contact
          used Boring mills / Machining Centers / Drilling machines Pillar Drilling Machine ALZMETALL AB 34 iTRONIC


          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland

          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-2010503 · Pillar Drilling Machine

          ALZMETALL - AB 34 iTRONIC - - Neu -

          Technical details
          34 mm︱ 40 mm︱ 40 mm︱threading in St 60 M 24 ︱threading in GG 20 M 30MK 4100-1.800 U/min.︱throat 300 mm︱ 615x430 mm︱ 2 x 14 x 224 mm︱ 138/688 mm︱column diameter 145 mm︱spindle stroke 160 mm︱feeds 0,1-0,2-0,3-0,4 mm/U︱total power requirement 1,4/2,2 kW︱Machine height 1865 mm︱weight 470 kg︱
          Standard equipment: 7 "" TFT LCD display with touch function: manual input of spindle speed Setpoint, actual speed display, integrated drilling depth display with touch Zero point transfer, virtual drilling depth scale in the display, machine Status displays and warnings in the display, service information, selectable User language: DE / EN / FR / ES / IT / NL / RU - Thread cutting device, for thread cutting with stop, max. 6th Thread / min (thread cutting performance dependent on spindle speed), thread depth adjustable via depth stop and in the TFT - LCD display (4 tools) - Infinitely variable speed setting by means of an adjusting lever - Spindle protection with electrical protection - Three separate buttons for clockwise - counterclockwise - stop - Mushroom pushbutton (latching) for EMERGENCY STOP - Main switch, lockable - Right and left rotation by contactor control - Control voltage 24 volts - Protection class IP 54 - Painting: DD structured paint signal white RAL 9003, PANTONE 7545c, black - Electromagnetic feed clutch with overload protection and electrical comfort cross-handle switch - Machine oil first filling: oil bottle, loose delivery Pos. 20.5 Foot switch, in addition to the thread cutting device for switching the Spindle direction of rotation in the process Pos. 37.5 Technology computer in the display. The technology computer guides you through the Machining task. Determination of the cutting data using the following parameters: Manufacturing process, tool diameter, cutting speed, Material table, transfer function of the spindle speed as setpoint
            34 mm
            40 mm
            40 mm
            threading in St 60 M 24
            threading in GG 20 M 30
            MK 4
            100-1.800 U/min.
            throat 300 mm
            615x430 mm
            2 x 14 x 224 mm
            138/688 mm
            column diameter 145 mm
            spindle stroke 160 mm
            feeds 0,1-0,2-0,3-0,4 mm/U
            total power requirement 1,4/2,2 kW
            Machine height 1865 mm
            weight 470 kg
            Description :
            Standard equipment:
            7 "" TFT LCD display with touch function: manual input of spindle speed
            Setpoint, actual speed display, integrated drilling depth display with touch
            Zero point transfer, virtual drilling depth scale in the display, machine
            Status displays and warnings in the display, service information, selectable
            User language: DE / EN / FR / ES / IT / NL / RU

            - Thread cutting device, for thread cutting with stop, max. 6th
            Thread / min (thread cutting performance dependent on spindle speed), thread depth
            adjustable via depth stop and in the TFT - LCD display (4 tools)
            - Infinitely variable speed setting by means of an adjusting lever
            - Spindle protection with electrical protection
            - Three separate buttons for clockwise - counterclockwise - stop
            - Mushroom pushbutton (latching) for EMERGENCY STOP
            - Main switch, lockable
            - Right and left rotation by contactor control
            - Control voltage 24 volts
            - Protection class IP 54
            - Painting: DD structured paint signal white RAL 9003, PANTONE 7545c, black
            - Electromagnetic feed clutch with overload protection and electrical comfort cross-handle switch
            - Machine oil first filling: oil bottle, loose delivery

            Pos. 20.5
            Foot switch, in addition to the thread cutting device for switching the
            Spindle direction of rotation in the process

            Pos. 37.5
            Technology computer in the display. The technology computer guides you through the
            Machining task. Determination of the cutting data using the following parameters:
            Manufacturing process, tool diameter, cutting speed, Material table, transfer function of the spindle speed as setpoint
          Datasheet
          Request / Contact
          used Boring mills / Machining Centers / Drilling machines Pillar Drilling Machine IBERDRILL Falken AZ 32


          • Heinz Sanders GmbH
          • Fresenburger Weg 4
          • 49779 Niederlangen
          • Deutschland

          • +49 (0) 5939 9406 40
            +49 (0) 5939 9406 50
          • maschinen@heinz-sanders.de
            www.heinz-sanders.de
          #1125-1030 · Pillar Drilling Machine

          IBERDRILL - Falken AZ 32 - - NEU -

          Technical details
          bore capacity in steel (diameter) 32 mm︱throat 300 mm︱bore stroke 150 mm︱ MK 4480 x 480 mm︱ 0,1 - 0,2 mm/U︱ M 22 (St 60)35 mm︱ 80-1170 U/min︱ 1,45 kW︱ 0,34 t︱ 0,8 x 1,0 x 2,0 m︱
            bore capacity in steel (diameter. 32 mm
            throat 300 mm
            bore stroke 150 mm
            MK 4
            480 x 480 mm
            0,1 - 0,2 mm/U
            M 22 (St 60)
            35 mm
            80-1170 U/min
            1,45 kW
            0,34 t
            0,8 x 1,0 x 2,0 m
          Datasheet
          Request / Contact
          used Boring mills / Machining Centers / Drilling machines Pillar Drilling Machine ALZMETALL ALZSTAR 40 SV


          • Heinz Sanders GmbH
          • Fresenburger Weg 4
          • 49779 Niederlangen
          • Deutschland

          • +49 (0) 5939 9406 40
            +49 (0) 5939 9406 50
          • maschinen@heinz-sanders.de
            www.heinz-sanders.de
          #1125-8236400 · Pillar Drilling Machine

          ALZMETALL - ALZSTAR 40 SV - - NEU -

          Technical details
          bore capacity in steel (diameter) 40 mm︱throat 293 mm︱bore stroke 120 mm︱spindle taper MT 3 ︱column diameter 115 mm︱table surface area 514 x 360 mm︱feed: 0,10 + 0,20 mm/U︱spindle turning speed - stepless 160 - 2250 U/min︱total power requirement 1,45 / 1,9 kW︱weight of the machine ca. 285 kg︱dimensions of the machine ca. 0,5 x 0,8 x 1,84 m︱
            bore capacity in steel (diameter. 40 mm
            throat 293 mm
            bore stroke 120 mm
            spindle taper MT 3
            column diameter 115 mm
            table surface area 514 x 360 mm
            feed: 0,10 + 0,20 mm/U
            spindle turning speed - stepless 160 - 2250 U/min
            total power requirement 1,45 / 1,9 kW
            weight of the machine ca. 285 kg
            dimensions of the machine ca. 0,5 x 0,8 x 1,84 m
          Datasheet
          Request / Contact
          used Boring mills / Machining Centers / Drilling machines Pillar Drilling Machine ALZMETALL AX 4 / SV


          • Heinz Sanders GmbH
          • Fresenburger Weg 4
          • 49779 Niederlangen
          • Deutschland

          • +49 (0) 5939 9406 40
            +49 (0) 5939 9406 50
          • maschinen@heinz-sanders.de
            www.heinz-sanders.de
          #1125-4305 · Pillar Drilling Machine

          ALZMETALL - AX 4 / SV - - NEU -

          Technical details
          bore capacity in steel (diameter) 55 mm︱throat 300 mm︱bore stroke 140 mm︱threading M 30 (STAHL) ︱spindle taper MT 4 ︱column diameter 145 mm︱table surface area 615 x 430 mm︱feed: 0,1 + 0,3 mm/U︱spindle turning speed - stepless 70 - 2400 U/min︱distance spindle /table 150 / 735 mm︱table surface - upper 440 x 440 mm︱table face - lower 320 x 320 mm︱total power requirement 3,0 kW︱weight of the machine ca. 0,41 t︱dimensions of the machine ca. 1,2 x 0,8 x 2,1 m︱
            bore capacity in steel (diameter. 55 mm
            throat 300 mm
            bore stroke 140 mm
            threading M 30 (STAHL)
            spindle taper MT 4
            column diameter 145 mm
            table surface area 615 x 430 mm
            feed: 0,1 + 0,3 mm/U
            spindle turning speed - stepless 70 - 2400 U/min
            distance spindle /table 150 / 735 mm
            table surface - upper 440 x 440 mm
            table face - lower 320 x 320 mm
            total power requirement 3,0 kW
            weight of the machine ca. 0,41 t
            dimensions of the machine ca. 1,2 x 0,8 x 2,1 m
          Datasheet
          Request / Contact
          used Boring mills / Machining Centers / Drilling machines Pillar Drilling Machine ALZMETALL AX 4/SV


          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland

          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-2010528 · Pillar Drilling Machine

          ALZMETALL - AX 4/SV - - Neu -

          Technical details
          55 mm︱ M42M56MK 4 ︱spindle turning speed - stepless 70-2400 U/min︱spindle stroke 140 mm︱throat 300 mm︱column diameter 145 mm︱ 615x430 mm︱distance spindle /table min./max. 150/735 mm︱ 2 x 14 x 224 mm︱feed 0,1 + 0,3 mm/U︱Machine height 1850 mm︱weight 380 kg︱engine output 3 kW︱
          Standard equipment: - Main switch with motor protection switch lockable - Mushroom pushbutton (latching) for EMERGENCY STOP - Speed adjustment stepless - Speed display digital - Feed overload protection - Protection IP 54 - Spindle protection with electrical protection Pos. 20.1 Tapping device with foot switch, for thread cutting with Stop, max. 6 threads / min., (Tapping power dependent on spindle speed)
            55 mm
            M42
            M56
            MK 4
            spindle turning speed - stepless 70-2400 U/min
            spindle stroke 140 mm
            throat 300 mm
            column diameter 145 mm
            615x430 mm
            distance spindle /table min./max. 150/735 mm
            2 x 14 x 224 mm
            feed 0,1 + 0,3 mm/U
            Machine height 1850 mm
            weight 380 kg
            engine output 3 kW
            Description :
            Standard equipment:
            - Main switch with motor protection switch lockable
            - Mushroom pushbutton (latching) for EMERGENCY STOP
            - Speed adjustment stepless
            - Speed display digital
            - Feed overload protection
            - Protection IP 54
            - Spindle protection with electrical protection

            Pos. 20.1
            Tapping device with foot switch, for thread cutting with
            Stop, max. 6 threads / min., (Tapping power dependent on spindle speed)
          Datasheet
          Request / Contact
          used Boring mills / Machining Centers / Drilling machines Pillar Drilling Machine ALZMETALL Alzstar 40/SV


          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland

          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-10097 · Pillar Drilling Machine

          ALZMETALL - Alzstar 40/SV - - Neu -

          Technical details
          40 mm︱ M 24M 30MK 3 ︱bore stroke 120 mm︱throat 293 mm︱column diameter 115 mm︱ 514x360 mm︱ 2 x 14 x 224 mm︱ 117/701 mm︱feed 0,10 + 0,20 mm/U︱spindle turning speed range 160-2.250 UpM︱height of the machine 1840 mm︱total power requirement 1,45/1,9 kW︱weight of the machine ca. 285 kg︱
          Standard equipment: - Mushroom pushbutton (latching) for EMERGENCY STOP - Reversing switch for right-left rotation - Motor protection switch - Speed adjustment stepless - Speed display digital - Feed overload protection - Protection IP 54 - Connector (fully assembled, cable length 2 m) - Spindle protection with electrical protection
            40 mm
            M 24
            M 30
            MK 3
            bore stroke 120 mm
            throat 293 mm
            column diameter 115 mm
            514x360 mm
            2 x 14 x 224 mm
            117/701 mm
            feed 0,10 + 0,20 mm/U
            spindle turning speed range 160-2.250 UpM
            height of the machine 1840 mm
            total power requirement 1,45/1,9 kW
            weight of the machine ca. 285 kg
            Description :
            Standard equipment:
            - Mushroom pushbutton (latching) for EMERGENCY STOP
            - Reversing switch for right-left rotation
            - Motor protection switch
            - Speed adjustment stepless
            - Speed display digital
            - Feed overload protection
            - Protection IP 54
            - Connector (fully assembled, cable length 2 m)
            - Spindle protection with electrical protection
          5.699 €
          Datasheet
          Request / Contact
          used Boring mills / Machining Centers / Drilling machines Pillar Drilling Machine IBERDRILL B 50


          • Heinz Sanders GmbH
          • Fresenburger Weg 4
          • 49779 Niederlangen
          • Deutschland

          • +49 (0) 5939 9406 40
            +49 (0) 5939 9406 50
          • maschinen@heinz-sanders.de
            www.heinz-sanders.de
          #1125-9363500 · Pillar Drilling Machine

          IBERDRILL - B 50 - - NEU -

          Technical details
          50 mm︱ 400 mm︱ 230 mm︱ 454 - 1032 U/min︱ 0,1-0,2-0,3-0,4-0,5-0,6 mm/U︱ 200 mm︱ 4 kW︱ 0,72 t︱ 600 x 1600 x 2450 mm︱
            50 mm
            400 mm
            230 mm
            4
            54 - 1032 U/min
            0,1-0,2-0,3-0,4-0,5-0,6 mm/U
            200 mm
            4 kW
            0,72 t
            600 x 1600 x 2450 mm
          Datasheet
          Request / Contact
          •   
          •   
          • 1  
          • 2  
          • 3  
          • 4  
          • 5  
          • 6  
          •   
          •   


          Pillar Drilling Machine: versatile and efficient!
          Find the best pillar drilling machine for your personal needs

          The term 'pillar drilling machine' encompasses a wide variety of different equipment suitable for different situations and materials. Pillar drilling machines also known as drill presses come in varying sizes from small machines for home use to larger models designed for industrial settings. Suited not only to wood but a large number of other materials pillar drilling machines are extremely versatile. LagerMaschinen is an ideal place to look for the best pillar drilling machine to fit both your needs and budget.

          Pillar drilling machines offer versatility and convenience

          A pillar drilling machine is extremely versatile. Whether you enjoy woodworking from home or require larger equipment for your business a pillar drilling machine serves a wide variety of functions. In contrast to a hand-held drill pillar drilling machines offer increased precision more powerful motors and the ability to perform additional functions like sanding or shaping. No matter what your needs are you can find an affordable pillar drilling machine quickly and easily at LagerMaschinen.

          Shopping at LagerMaschinen saves you both time and money

          One of the advantages of shopping for used machinery online is the convenience. Comparing prices and features can be time-consuming but LagerMaschinen takes all the hassle out of the shopping process. The user-friendly interface allows you to browse used machines by location price or design. If you're in the market for a pillar drilling machine or any other piece of industrial equipment check out LagerMaschinen and maximize both your time and your budget.