European network of stockholding machinery dealers

Bitte einen Suchbegriff eingeben - Please enter a search term
Category:
    Manufacturer:
      Machines:
        Trader:

          Sheet metal working - shaeres - bending

          Machinelist: Sheet metal working / shaeres / bending


          Plate Bending Machine - 3 Rolls

          used Sheet metal working / shaeres / bending Plate Bending Machine - 3 Rolls MG AK 206 P


          • A + B Werkzeuge Maschinen Handels GmbH
          • Rottweg 17
          • 48683 Ahaus
          • Deutschland

          • (0049)-2561-9384-71
            (0049)-2561-9384-36
          • info@ab-maschinen.de
            www.ab-maschinen.de
          #1008-9401219 · Plate Bending Machine - 3 Rolls

          MG - AK 206 P - - 2008 -

          Technical details
          sheet width 2050 mm︱plate thickness 6,0 mm︱pre-bending 4,0 mm︱diameter of upper rolls 160 mm︱diameter of lower rolls 140 mm︱total power requirement 2,2 kW︱weight of the machine ca. 3000 kg︱dimensions of the machine ca. 3500 x 1500 x 1300 mm︱
          ** New price ~ 45.000 euros ** from a maintenance workshop ** rarely used (!!) Furnishing: - hydraulic 3-roller bending machine - with conical bending device * Inclination of the bottom roller and the side rollers * Alignment in parallelism in each side roller position * Hardened stop roller * Workpiece limitation for a cone with a 45° pitch: * Working length max: 60% * Bending capacity max: 50% - pivoting operation - Digital displays (2 pieces) for the side roller position - Adjustable contact pressure of the bottom roller with manometer - hardened rollers SAE 1050 CK 45 - Conical bending device - Hydraulic folding store for removing closed pipes - Direct drive of the upper and lower roller (planetary gear) - Parallelism of the side rollers via torsion shafts - Permanent lubrication of all bearings - Security device - Bed. Instructions
            sheet width 2050 mm
            plate thickness 6,0 mm
            pre-bending 4,0 mm
            diameter of upper rolls 160 mm
            diameter of lower rolls 140 mm
            total power requirement 2,2 kW
            weight of the machine ca. 3000 kg
            dimensions of the machine ca. 3500 x 1500 x 1300 mm
            Description :
            ** New price ~ 45.000 euros
            ** from a maintenance workshop
            ** rarely used (!!)

            Furnishing:
            - hydraulic 3-roller bending machine
            - with conical bending device
            * Inclination of the bottom roller and the side rollers
            * Alignment in parallelism in each side roller position
            * Hardened stop roller
            * Workpiece limitation for a cone with a 45° pitch:
            * Working length max: 60%
            * Bending capacity max: 50%
            - pivoting operation
            - Digital displays (2 pieces) for the side roller position
            - Adjustable contact pressure of the bottom roller with manometer
            - hardened rollers SAE 1050 CK 45
            - Conical bending device
            - Hydraulic folding store for removing closed pipes
            - Direct drive of the upper and lower roller (planetary gear)
            - Parallelism of the side rollers via torsion shafts
            - Permanent lubrication of all bearings
            - Security device
            - Bed. Instructions


        • A + B Werkzeuge Maschinen Handels GmbH
        • Rottweg 17
        • 48683 Ahaus
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Plate Bending Machine - 3 Rolls MG AK 206 P


          • A + B Werkzeuge Maschinen Handels GmbH
          • Rottweg 17
          • 48683 Ahaus
          • Deutschland

          • (0049)-2561-9384-71
            (0049)-2561-9384-36
          • info@ab-maschinen.de
            www.ab-maschinen.de
          #1008-9401218 · Plate Bending Machine - 3 Rolls

          MG - AK 206 P - - 2007 -

          Technical details
          sheet width 2050 mm︱plate thickness 6,0 mm︱pre-bending 4,0 mm︱diameter of upper rolls 160 mm︱diameter of lower rolls 140 mm︱total power requirement 2,2 kW︱weight of the machine ca. 3.000 kg︱dimensions of the machine ca. 3500 x 1500 x 1300 mm︱
          ** New price ~ 48.000 euros ** from a repair workshop - good condition (!) Furnishing: - hydraulic 3-roller bending machine - with conical bending device * Inclination of the bottom roller and the side rollers * Alignment in parallelism in each side roller position * Hardened stop roller * Workpiece limitation for a cone with a 45° pitch: * Working length max: 60% * Bending capacity max: 50% - pivoting operation - Digital displays (2 pieces) for the side roller position - Adjustable contact pressure of the bottom roller with manometer - hardened rollers SAE 1050 CK 45 - Conical bending device - Hydraulic folding store for removing closed pipes - Direct drive of the upper and lower roller (planetary gear) - Parallelism of the side rollers via torsion shafts - Permanent lubrication of all bearings - Security device - Bed. Instructions
            sheet width 2050 mm
            plate thickness 6,0 mm
            pre-bending 4,0 mm
            diameter of upper rolls 160 mm
            diameter of lower rolls 140 mm
            total power requirement 2,2 kW
            weight of the machine ca. 3.000 kg
            dimensions of the machine ca. 3500 x 1500 x 1300 mm
            Description :
            ** New price ~ 48.000 euros
            ** from a repair workshop - good condition (!)

            Furnishing:
            - hydraulic 3-roller bending machine
            - with conical bending device
            * Inclination of the bottom roller and the side rollers
            * Alignment in parallelism in each side roller position
            * Hardened stop roller
            * Workpiece limitation for a cone with a 45° pitch:
            * Working length max: 60%
            * Bending capacity max: 50%
            - pivoting operation
            - Digital displays (2 pieces) for the side roller position
            - Adjustable contact pressure of the bottom roller with manometer
            - hardened rollers SAE 1050 CK 45
            - Conical bending device
            - Hydraulic folding store for removing closed pipes
            - Direct drive of the upper and lower roller (planetary gear)
            - Parallelism of the side rollers via torsion shafts
            - Permanent lubrication of all bearings
            - Security device
            - Bed. Instructions


        • A + B Werkzeuge Maschinen Handels GmbH
        • Rottweg 17
        • 48683 Ahaus
        • Deutschland

        • Datasheet
          Request / Contact

          Plate Bending Machine - 4 Rolls

          used Sheet metal working / shaeres / bending Plate Bending Machine - 4 Rolls MG AK 206 P


          • Frech GmbH
          • Werderstr. 82
          • 74889 Sinsheim
          • Deutschland

          • 0049-7261-1011
            0049-7261-63966
          • info@frech-maschinen.de
            www.frech-maschinen.de
          #1073-55667 · Plate Bending Machine - 4 Rolls

          MG - AK 206 P - - 2007 -

          Technical details
          sheet width 2050 mm︱plate thickness 6,00 mm︱pre-bending 4,00 mm︱diameter of upper rolls 160 mm︱diameter of lower rolls 140 mm︱total power requirement 2,2 kW︱weight of the machine ca. 3.000 kg︱dimensions of the machine ca. 3500 x 1500 x 1300 mm︱
          ** New price ~ 48.000 euros ** from a repair workshop - good condition (!) Furnishing: - hydraulic 4-roller bending machine - with conical bending device * Inclination of the bottom roller and the side rollers * Alignment in parallelism in each side roller position * Hardened stop roller * Workpiece limitation for a cone with a 45° pitch: * Working length max: 60% * Bending capacity max: 50% - pivoting operation - Digital displays (2 pieces) for the side roller position - Adjustable contact pressure of the bottom roller with manometer - hardened rollers SAE 1050 CK 45 - Conical bending device - Hydraulic folding store for removing closed pipes - Direct drive of the upper and lower roller (planetary gear) - Parallelism of the side rollers via torsion shafts - Permanent lubrication of all bearings - Security device - Bed. Instructions
            sheet width 2050 mm
            plate thickness 6,00 mm
            pre-bending 4,00 mm
            diameter of upper rolls 160 mm
            diameter of lower rolls 140 mm
            total power requirement 2,2 kW
            weight of the machine ca. 3.000 kg
            dimensions of the machine ca. 3500 x 1500 x 1300 mm
            Description :
            ** New price ~ 48.000 euros
            ** from a repair workshop - good condition (!)

            Furnishing:
            - hydraulic 4-roller bending machine
            - with conical bending device
            * Inclination of the bottom roller and the side rollers
            * Alignment in parallelism in each side roller position
            * Hardened stop roller
            * Workpiece limitation for a cone with a 45° pitch:
            * Working length max: 60%
            * Bending capacity max: 50%
            - pivoting operation
            - Digital displays (2 pieces) for the side roller position
            - Adjustable contact pressure of the bottom roller with manometer
            - hardened rollers SAE 1050 CK 45
            - Conical bending device
            - Hydraulic folding store for removing closed pipes
            - Direct drive of the upper and lower roller (planetary gear)
            - Parallelism of the side rollers via torsion shafts
            - Permanent lubrication of all bearings
            - Security device
            - Bed. Instructions


        • Frech GmbH
        • Werderstr. 82
        • 74889 Sinsheim
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Plate Bending Machine - 4 Rolls MG EH 123 P


          • Frech GmbH
          • Werderstr. 82
          • 74889 Sinsheim
          • Deutschland

          • 0049-7261-1011
            0049-7261-63966
          • info@frech-maschinen.de
            www.frech-maschinen.de
          #1073-55703 · Plate Bending Machine - 4 Rolls

          MG - EH 123 P - - 2001 - MG CNC

          Technical details
          sheet width 1230 mm︱plate thickness 3,00 mm︱pre-bending 1,50 mm︱upper roll diameter 80,0 mm︱lower roll diameter 120 mm︱side roll diameter 110 mm︱Control MG CNC ︱total power requirement 2,2 kW︱weight of the machine ca. 1160 kg.︱
          ** very good condition ** used very little (!!) Furnishing: - hydraulic four-roller round bending machine - mobile operation (CNC) - digital position displays of the rollers - Conical bending device - robust welded steel construction - hydraulic direct drive of the central rollers - hydraulic folding storage for removing pipes - Pressure gauge for hydraulic pressure display - Safety device - Machine documentation
            sheet width 1230 mm
            plate thickness 3,00 mm
            pre-bending 1,50 mm
            upper roll diameter 80,0 mm
            lower roll diameter 120 mm
            side roll diameter 110 mm
            Control MG CNC
            total power requirement 2,2 kW
            weight of the machine ca. 1160 kg.
            Description :
            ** very good condition
            ** used very little (!!)

            Furnishing:
            - hydraulic four-roller round bending machine
            - mobile operation (CNC)
            - digital position displays of the rollers
            - Conical bending device
            - robust welded steel construction
            - hydraulic direct drive of the central rollers
            - hydraulic folding storage for removing pipes
            - Pressure gauge for hydraulic pressure display
            - Safety device
            - Machine documentation



        • Frech GmbH
        • Werderstr. 82
        • 74889 Sinsheim
        • Deutschland

        • Datasheet
          Request / Contact

          Rolls bending machine - 3 Rolls

          used Sheet metal working / shaeres / bending Rolls bending machine - 3 Rolls MG AK 206 P


          • Frech GmbH
          • Werderstr. 82
          • 74889 Sinsheim
          • Deutschland

          • 0049-7261-1011
            0049-7261-63966
          • info@frech-maschinen.de
            www.frech-maschinen.de
          #1073-55670 · Rolls bending machine - 3 Rolls

          MG - AK 206 P - - 2008 -

          Technical details
          sheet width 2050 mm︱plate thickness 6,00 mm︱pre-bending 4,00 mm︱diameter of upper rolls 160 mm︱diameter of lower rolls 140 mm︱total power requirement 2,2 kW︱weight of the machine ca. 3,0 t︱dimensions of the machine ca. 3,5 x 1,5 x 1,3 m︱
          ** New price ~ 45.000 euros ** from a maintenance workshop ** rarely used (!!) Furnishing: - hydraulic 4-roller bending machine - with conical bending device * Inclination of the bottom roller and the side rollers * Alignment in parallelism in each side roller position * Hardened stop roller * Workpiece limitation for a cone with a 45° pitch: * Working length max: 60% * Bending capacity max: 50% - pivoting operation - Digital displays (2 pieces) for the side roller position - Adjustable contact pressure of the bottom roller with manometer - hardened rollers SAE 1050 CK 45 - Conical bending device - Hydraulic folding store for removing closed pipes - Direct drive of the upper and lower roller (planetary gear) - Parallelism of the side rollers via torsion shafts - Permanent lubrication of all bearings - Security device - Bed. Instructions
            sheet width 2050 mm
            plate thickness 6,00 mm
            pre-bending 4,00 mm
            diameter of upper rolls 160 mm
            diameter of lower rolls 140 mm
            total power requirement 2,2 kW
            weight of the machine ca. 3,0 t
            dimensions of the machine ca. 3,5 x 1,5 x 1,3 m
            Description :
            ** New price ~ 45.000 euros
            ** from a maintenance workshop
            ** rarely used (!!)

            Furnishing:
            - hydraulic 4-roller bending machine
            - with conical bending device
            * Inclination of the bottom roller and the side rollers
            * Alignment in parallelism in each side roller position
            * Hardened stop roller
            * Workpiece limitation for a cone with a 45° pitch:
            * Working length max: 60%
            * Bending capacity max: 50%
            - pivoting operation
            - Digital displays (2 pieces) for the side roller position
            - Adjustable contact pressure of the bottom roller with manometer
            - hardened rollers SAE 1050 CK 45
            - Conical bending device
            - Hydraulic folding store for removing closed pipes
            - Direct drive of the upper and lower roller (planetary gear)
            - Parallelism of the side rollers via torsion shafts
            - Permanent lubrication of all bearings
            - Security device
            - Bed. Instructions


        • Frech GmbH
        • Werderstr. 82
        • 74889 Sinsheim
        • Deutschland

        • Datasheet
          Request / Contact
          •   
          •   
          • 1  
          •   
          •