MEB Maschinenhandel GmbH - Stockist for used machines

Haul-off force -- N︱Press length 115 mm︱Belt width 40 mm︱

---

Haul-off force -- N︱Press length 260 mm︱Belt width 85 mm︱

---

machine measurements 6.850 x 3.600 x 1.900 mm︱machine weight 5.000 kg︱power capacity 9 kW︱

---

Condition: used - as good as new unit is still completely packed Specification: Medical surgical mask system complete Consisting of: - See sketches in the attachment Summary of the equipment: This machine is mainly used for automatic forming of plane mask: the whole roll of cloth is driven by roller after being unrolled, and the cloth is folded and wrapped automatically. The nose bridge strip is rolled up for traction and unrolled. After cutting with a fixed length, it is imported into the edge cloth. The two sides are welded to the seal by ultrasonic welding. The mask was transported to two mask ear belt welding stations by the assembly line, and the mask was finally formed by ultrasonic welding. After the mask is made, it is transported to the flat belt line through the assembly line for collection. - CE certified is available - Space requirement L/W/H approx.: 6,850 x 3,600 x 1,900 mm - Weight approx.: 5,000 kg - Paint finish: RAL 9003 - Voltage: 220V AC, 50 Hz - Total power approx.: 9 kW

machine measurements 9.657 x 1.472 x 1.985 mm︱machine weight -- kg︱power capacity -- kW︱

---

Condition: used - as good as new Specification: FFP 2 N95 mask system complete Consisting of: - see sketches in the plant - cycle time approx.: 35 - 50 pieces/min - not CE certified - Space requirement approx.: 9,657 x 1,472 x 1,985 mm - Completely assembled

machine measurements 3.000 mm︱machine weight -- kg︱power capacity 90 kW︱

---

machine measurements 8.000 mm︱machine weight 9.800 kg︱power capacity 17,5 kW︱

---

Condition: used Specification: Batch-off plant – used - max. width rubber sheet: 600 mm - thickness rubber sheet: 4 – 10 mm - distance between banging bars: effective 140 mm - max. pendant length hanging sheet: 3600 mm - take-off linear speed: 4 – 35 m/min. frequency control of motor speed linear speed: - swinging: 0 – 40 m/min. - hinging: 0 – 1,55 m/min. - no. of cooling fans: 10 set - power cooling fans: 0,75 kW/set - total length of line: 8.000 mm - total power: 17,5 kW - final temperature sheet: room temperature +5°C - compressed air pressure: 0,4 – 0,6 Mpa - cross and longitudinal cutter, wig-wag packer for pallets - total weight: ca. 9800 kg STUCTURAL FEATURES: 1. take-off device is off the ring type conveyor belt with guide strip and without any union or joint, and equips with printer. Take-off conveyor belt, lifting and dip-in wire mesh belt all share one same frequency conversion AC speed regulating motor, which the conveying speed could be adjustable. 2. lifting bar is driven by one set cycloid pin wheel speed reducer through AC frequency conversion and the bar speed is synchronous as the speed of lifting device. 3. the sheet is uniformly coated with the lubricator by dipping without polluting the environment. Its cooling effect is better than the spraying. 4. the hanging up area is fully closed, which adopts the blower to blow the sheet at a slant. So it improves the air flowing direction and cooling effect.

machine measurements 12.200x1.800x800 mm︱machine weight 1.040 kg︱power capacity 27 kW︱

---

machine measurements 2.200 x 1.200 x 2.260 mm︱machine weight 1.000 kg︱power capacity -- kW︱

---

Condition: used Specification: automatic control machine for O-rings - second-hand rotary transfer machine with 16 pick-up stations - year of construction approx.: 2011 - pick-up stations: 16 - measuring range: ID from 55 - 90 mm cord from 2,5 - 3,5 mm (ID 55 - 70 mm) cord from 2.5 - 4.5 mm (ID 70 - 90 mm) - Part throughput: approx. 3 - 4 seconds per part approx. 900 - 1,200 parts per hour approx. 21,600 - 28,800 parts per day - Technical application: surface defect and crack detection on O-rings - Sorting function: Good, Bad, Undefined - Dimensions LxWxH approx.: 2,200 x 1,200 x 2,260 mm - Weight approx.: 1,000 kg

machine measurements -- mm︱machine weight -- kg︱power capacity -- kW︱

---

Condition: used - in production until approx. middle of February 2022 Specification: microwave vulcanizing line hot air channel with microwave Conversion to S7 control, 2015 - microwave vulcanizing line: MW24/HL 12x2/KK09/RA - Type: MW 24.1-200.075 - Channel length microwave approx.: 17.170 mm - Microwave feed: Number of HF generators: 4 Power per HF generator: max. 6 kW power setting: 0 / 10 - 100% Frequency of the HF generators: 2450 - 2470 MHz - channel length hot air approx.: 26.170 mm - Air heating: Number of heating zones: 3 Power per heating zone: 9,9 kW Heating zones gas heated channel air temperature max.: 250°C at the injection point - Cooling basin length approx.: 15,000 mm - belt width: 105 to 200 mm, per station - Transpot belt height approx.: 1,100 mm - number of belts: 1 - transport speed: 1 - 30 m/min - Voltage: 3 x 400 V, 50 Hz - Control voltage: 230 V, 50 Hz/ 24 V DC - Material running direction: from right to left - Conversion to Siemens S7 control was made in 2015 Documentation in German language available. plant will be available from approx. kW 7/2022. A second identical system will be available from kW 11/2022, but with the material material flow direction from left to right. In this second the control panel is defective. However, it can be repaired at Siemens.

machine measurements -- mm︱machine weight -- kg︱power capacity 37,5 kW︱

---

Condition: used - was in production until approx. middle of November 2021 Specification: Hot air duct 1-tier, electric - duct type: HLK 150-1K, electrically heated - duct length: 9.000 mm - Belt width: 150 mm - Belt height approx.: 1,250 mm - Max. profile height: 60 mm - Number of belts: 1 - Belt control: automatic, 3-point control - Transport speed: 4 - 40 m/min - Speed display: digital - Drive motor: power gear motor 0,5 kW - Voltage: 220/380V, 50Hz, N - Number of heating zones: 3x electrically heated - Electric air heater: 3x 12.5 kW - Air temperature max.: 320°C - All channels with fire extinguishing nozzles Documentation in German available. The gas burners were regularly serviced and if necessary replaced if necessary - Heat exchanger: - Space requirement heat exchanger approx.: 3,100 x 1,500 x 4,000 mm (with platform when installed above the duct) - Total weight of heat exchanger approx.: 1,000 kg with platform

machine measurements 20.000 x 2.580 x 2.350 mm︱machine weight 6.000 kg︱power capacity 120 kW︱

---

Condition: used - was in production until approx. mid November 2021 Specification: Hot air duct with cooling duct underneath - duct type: HLK 114 gas, gas heated - duct length: 18.000 mm - belt width: 150 mm - Belt lengths: - Upper belt: 39,430 mm - Middle belt: 38,110 mm - Lower belt: 37,360 mm - Max. profile height: 60 mm - Transport speed: 4 - 40 m/min - Drive motors: permanent-magnet gear motor 3x 0.37 kW, 170 V - Belt control motors: Three-phase motor 3x 0.045 kW, 220/380V/50Hz - Blow-in fan: RD7, 220/380V50Hz, 2.2 kW - Main exhaust fan: HRD 65/7, 380V/50Hz, 7.5 kW - Number of heating zones: 6x gas-heated - Gas burner: Nominal power: 20 kW/burner - Air temperature max.: 320°C - All ducts with fire extinguishing nozzles Cooling duct: - Drive motors: Permanent power geared motor 2x 0.37 kW, 170 V - Side channel compressor: SD 740, 380V/50Hz, 6 kW - Channel length: 18,000 mm - Belt lengths: Upper belt: 37,550 mm Lower belt: 38,890 mm - Belt width: 180 mm - Profile height max.: 60 mm - Transport speed: 4 - 40 m/min Documentation available in German. The gas burners were regularly serviced and replaced as required. - Heat exchanger: WT 160 G - Space requirement heat exchanger approx.: 3,100 x 1,500 x 4,000 mm (with platform for installation above of the duct) - Total weight of heat exchanger approx.: 1,000 kg with platform

machine measurements BxT 4.067 x 3.186 mm︱machine weight -- kg︱power capacity -- kW︱

---

Condition: used Specification: PAAL cartoning machine, type Elematic 2 for folding boxes: sales carton packaging machine - year of construction: 1989 - for the following inner dimensions of folding boxes: width: 80 - 200 mm depth: 90 - 220 mm height: 16 - 100 mm - Folding carton and blank see attachment - Max. number of cycles: 160 pieces/min. or 10 folding boxes/min. - with gluing unit make Nordson PROblue 4 - Space requirement, installation area W/D approx.: 4,067 x 3,186 mm

machine measurements ca. 12.000 mm︱machine weight -- kg︱power capacity -- kW︱ 550 mm︱

---

chamber volume 28 liter︱useable volume -- liter︱friction ca. 1:1,17 ︱motor drive power 125 PS︱

---

chamber volume - liter︱useable volume 1,5 liter︱friction - ︱motor drive power 22 kW︱

---

Condition: used - refurbished Specification: Laboratory Internal Mixer - used - Capacity: about 1,5 lts - Closing system: frontal door with pneumatic pistons - Pneumatic ram for loading of materials - Rotors model: tangential type - New rotary joints for water cooling - Painting: (Color RAL in according to your specifications) - DC engine: 22 kW; - New electric cabinet with driving system for variable speed of rotors - N.1 new electric panel - New on board electric system on the machine - Safety devices in according to standard rules - Manual of use and maintenance in English language and CE marking - Reconditioned and guaranteed machine in according to standard rules Warranty: 1 year

chamber volume 80 liter︱useable volume -- liter︱friction -- ︱motor drive power 390 kW︱

---

Condition: used - overhauled - with warranty Specification: Internal mixer used - Capacity: about 80 lts - Rotors model: tangential type with 3 wings - Command gearbox: semi-unidrive type - Max speed rotors: about 60 rpm - Closing system: drop-door type - Hydraulic unit for drop-door system - Pneumatic hopper for loading material - DC engine: 390 kW - 1500 rpm - 440 V - New electric cabinet with driving system for variable speed of rotors - N.1 new electric panel - New on board electric system on the machine - Safety devices in according to standard rules - Manual of use and maintenance in English language and CE marking - Reconditioned and guaranteed machine in according to standard rules - Warranty: 1 year

chamber volume - liter︱useable volume 450 liter︱friction - ︱motor drive power 30 kW︱

---

barrel diameter 254 mm︱max. barrel capacity 40 dm³︱ram stroke 800 mm︱working pressure 250 bar︱throughput kg/h︱

---

barrel diameter 254 mm︱max. barrel capacity 60 liter︱ram stroke -- mm︱

---

Condition: used, Specification: blank vending machine - second-hand incl. tilting cooling unit Collectacool drive: - Hydraulic pump motor: 11 kW - Cutting motor: 1.1 kW - Vacuum pump motor: 2.2 kW - Heating power: 9 kW - Chamber volume: 60 kg - Cylinder diameter: 254 mm - Largest nozzle diameter: 190 mm - Operating voltage: 3x380 V / 50 Hz (Europe) - Total weight: 3,080 kg - incl. tilting cooling unit: Collectacool

roll diameter 250 mm︱roll length 500 mm︱rolls drilled Kernbohrung ︱nip adjustment mechanisch ︱drive power: kW︱

---

screw ø: 180 mm︱screw length: 30D ︱screw speedl: -- U/min︱drive power: 90 kW︱

---

Condition: used - Specification: plastic granulating line extruder HKS 180-120 with side dosing make Sikoplast Overhauled 2015 - Usage: wetting of carbon fibre - Drive power: 90 kW - L/D ratio: 30 - Screw type: 3-zone screw - Throughput capacity: 80 - 250 kg - Atmospheric degassing: Yes - Vacuum degassing: No - with side dosing: make Sikoplast - Application: Dosing of raw materials into the extruder - Drive power: 11 kW - Speed: 1 - 36 rpm

screw ø: -- mm︱screw length: -- ︱screw speedl: -- U/min︱

---

Condition: used - as good as new Specification: 3x wide slot tools with one heating turbine for mounting on plastic extruders Tools for the production of MeltBlown fleece consisting of: - Three wide slot tools for the following MB fleece widths: - 600 mm, - 500 mm, - 400 mm - Heating control for the MB process - Heating turbine for the air - Various spare parts such as: - Heating cartridges, heating rods, seals, sieves, temperature sensor

screw ø: 60 mm︱screw length: 33D ︱screw speedl: -- U/min︱drive power: 55 kW︱

---

condition: used - Specification: Plastic extruder type EXTREX 45GP K60E-33D with melt pump make MAAG for compounding plastics - with Maag melt pump type EX 45-5 GP E - Screw extension: to the rear - Screw diameter: 60 mm - Screw length: 33D - Degassing opening: 13D from the front - Screw design: Type f, for PP, EMFS 6 - Processing of PP and PA products without sensing elements - Heating capacity: 8,4 kW - Flange heating: 1,6 kW - Heating zones: 5 pieces - Cooling zones: 5 pieces - Motor power: 55 kW - Extruder capacity approx.: min. 150 Kg, - Material: PP-MVI70 MAAG melting pump: - Type: EX 45-5 GP E - Specific delivery volume: 46.3 cm³/rev. Wide slot nozzle: - Slot width: 600 mm Visualisation: KEC-PC - in connection with Siemens control S7-300 and multi-temperature controllers - Simatic operations panel with 19" display

screw ø: 70 mm︱screw length: 24D ︱screw speedl: -- U/min︱drive power: 70 kW︱

---

condition: used - Specification: Plastic extruder type K70-24D with melting pump and suction conveyor - with Maag melting pump and suction conveyor - Screw diameter: 70 mm - Screw length approx.: 1,680 mm - Length of the snail: 24D - Motor power: 70 kW - Snail geometry: classic polyphine screw, which is designed as a barrier screw. This means with shear and mixing section. - Output approx.: 120 Kg, PP standard - Dimensions W/D/H approx.: 4,000 x 1,200 x 2250 mm Package two approx.: 1,200 x 800 x 1,100 mm