turning diameter over bed 1000 mm︱turning diameter over slide rest 760 mm︱turning length 3000 mm︱spindle turning speed range 4,5 - 900 U/min︱spindle bore 104 mm︱total power requirement 30 kW︱weight of the machine ca. 10,5 t︱dimensions of the machine ca. m︱

---

- 3-axis D.R.O. - Feed in the upper slide - Multifix quick change tool holder size D with 2 holders - coolant device - steady-rest The lathe chuck (face plate) shown has been replaced by an older one.

turning diameter 240 mm︱turning length 800 mm︱control TX-8F ︱spindle passage 65 mm︱tool taper VDI 50 ︱main drive 30 kW︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱

---

The machine has only run sporadically in recent years, basically max. 1-shift operation. CNC control TX-8F Tapping device 12 turret slots Driven tools Dismantling and loading cost not included!

turning diameter 1300 mm︱turning length 6000 mm︱control Siemens 840D Power Line ︱total power requirement kW︱weight of the machine ca. 82 t︱dimensions of the machine ca. 17,6 x 3,7 x 3,9 m︱

---

5-axis CNC inclined bed turning and milling center The machine is PRACTICAL NEW! - Test run only! Main spindle hours: 1047 Main spindle C axis: 228 Advance items active: 968 Milling spindle active: 460 (New price in 2009 - Euro 1,700,000.00) Siemens 840D CNC Control. Swing diameter over the bed 1300 mm. Swing diameter over the saddle 1250 mm. Turning length 6000 mm. Spindle bore 225 mm. Chuck diameter 630 mm. Spindle drive motor rating 78/87 KW. Spindle speeds 10 - 1244 rpm in 2 gear steps. C-Axis 0.001 deg. Single tool carrier for Turning/Milling. 96 station tool magazine/tool changer. Tool taper HSK-A100. Milling spindle drive motor rating 38/48.3 KW. Milling spindle speeds to 3500 rpm. Y-Axis (off centre milling/drilling) -400/+395 mm. B-Axis tool swivelling axis range -105/+95 deg.. 3 x NC-steady slides with steady rests. NC-Tailstock. Tool monitoring. Coolant pump 80 bar. Process near measuring of the workpiece in the working area. Huge amount ( EUR 176,695.) of toolings unused, included

turning diameter 250 mm︱turning length 1400 mm︱control Siemens C 200-4 D 840 D︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. 4.520 x 2.440 x 2.400 m︱

---

turning diameter 36 mm︱turning length 100 mm︱control TRAUB TX8i ︱bar capacity 36 mm︱spindle turning speed range max. 6300 U/min︱main drive motor 10,7 kW︱Subspindle motor 10,7 kW︱total power requirement 33 kW︱weight of the machine ca. t︱

---

* Main- and subspindle with C-axis 0,001 deg. * Bar loader FMB turbo 5-42 XT * Tool carrier I (X/Y/Z): - 12-station turret, life tools 6000 rpm, 5,5 kW - Travels: X-axis 50 mm, Y-axis +/- 40mm, Z-axis 100 mm * Tool carrier II (X/Z): - 5-station front working attachment, life tools 6000 rpm, 5,5 kW - Travels: X-axis 370 mm, Z-axis 250 mm * Tool carrier III (X/Y): - 5-station back working attachment, life tools 6000 rpm, 5,5 kW - Travels: X-axis 73 mm, Y-axis +/-50 mm Information about the chucks: Main spindle: Chuck clamping top pull-back Gr32 SK6970ZW Counter spindle: Chuck clamping top Axfix Gr32 f SK6970ZW Collets: SK6970ZW or SK6970ZW

turning diameter 540 mm︱turning length ca. 1065 mm︱control MAZATROL 640 MT ︱total power requirement kW︱weight of the machine ca. 8,4 t︱dimensions of the machine ca. m︱

---

MAZATROL 640 MT control max. turning diameter 540 mm Z-axis movements 1.065 mm Main spindle, max. speed 5.000 rpm Main spindle full C-axis Sub spindle, max. speed 6.000 rpm Y-axis +/- 80 mm Milling spindle, max. speed 6.000 rpm Full B-axis, 225° ATC 40 tools KM-63 toolholders Tooleye 1 x 3-Backenfutter, Diameter 210 mm 1 x 3-Backenfutter, Diameter 170 mm Portallader Flex GL-100C High pressure coolant, 20 bar Swarf conveyor

turning diameter 500 mm︱turning length 600 mm︱control Eltro Pilot 2 ︱total power requirement 45 kVA︱weight of the machine ca. t︱dimensions of the machine ca. 4,5 x 2,0 x 1,8 m︱

---

Machine in good condition. Machine under power 40514 hours. Equipmet: CNC control Eltro Pilot 2 Driven tools C-axis, indexable main spindle Power chuck with jaws. A range of standard and driven tool holders. Chip conveyor with coolant device Swing over bed: 500 mm Turning length: 600 mm Spindle speed: 20 - 5000 rpm. Number of tools: 12 Spindle Bore: 72mm Tailstock quill diameter: 80 mm Tailstock quill stroke: 100mm Space requirement approx.: 4.5 x 2.0 x 1.8 m

turning diameter over bed 5000 mm︱turning diameter over slide rest 4000 mm︱turning length 22000 mm︱total power requirement 36 kW︱weight of the machine ca. 53,5 t︱dimensions of the machine ca. m︱

---

Facing and Centering Lathe with plate field - Max. Turning diameter over the bed slide 4000 mm - Max. Turning diameter 5000 mm - Max. Turning length: 22000 mm - Face plate speed range 0.9 - 56 rpm - Faceplate diameter 4420 mm - Max. Workpiece weight between the centers: 20 t - Max. workpiece weight -without tailstock: 12,5 t - Two bed slides with 4500 mm turning length - With plate fields - A roller block - With tailstock Machine was overhauled in Italy in 2014 with stepless speed control. After the overhaul, the lathe was no longer operational. Machine is dismantled and stored near Hamburg.

turning diameter over bed 4100 mm︱turning diameter over slide rest 3505 mm︱turning length 12000 mm︱centre height 2045 mm︱centre distance 12192 mm︱bed width 4270 mm︱max. workpiece weight between centres 70000 kg︱main drive 81 kW︱faceplate turning speed range 0,3- 48,6 (4 Stufen) U/min︱total power requirement kW︱weight of the machine ca. 205 t︱dimensions of the machine ca. m︱

---

4 SLIDES BED LATHE CENTRES HEIGHT 2.045 MM. CENTRES DISTANCE 12.192 MM. MAX. DIAMETER OVER BED 4.100 MM. PACKING LIST FOR CRAVEN 80,5 LATHE n. 4 X 40’ OT for pieces in normal sizes n. 5 SPECIAL PCS: HEAD mm. 4.560 x 4.170 x 3.000 kg. 32.000 FACEPLATE mm. 3.650 x 3.650 x 250 kg. 15.000 BED UNDER THE HEAD mm. 4.900 x 4.280 x 750 kg. 22.000 BED mm. 6.870 x 4.280 x 750 kg. 30.400 BED mm. 6.870 x 4.280 x 750 kg. 30.400 MAX. DIAMETER OVER SADDLE 3.505 MM. BED WIDTH 4.270 MM. MAX. WEIGHT BETWEEN CENTRES 70 TONS. MAX. WEIGHT BETWEEN CENTRES (with n. 1 steady) 80 TONS. SPINDLE MOTOR POWER 81 KW. SPINDLE SPEEDS - n. 4 ranges 0,3 ÷ 48,6 RPM. SPINDLE HOLE 180 MM. TOTAL WEIGHT 205 COMPLETE WITH: - 4 JAWS FACEPLATE 3.660 MM. - N. 2 CLOSED STEADIES, DIAMETER 305 - 1.016 MM. - N. 2 SPECIAL SUPPORTS FOR CRANK SHAFTS - UPPER SADDLE FOR THREADING - CRANK SHAFTS TURNING DEVICE

turning diameter over bed 1250 mm︱turning diameter over slide rest 1000 mm︱turning length 11000 mm︱total power requirement kW︱weight of the machine ca. 49 t︱dimensions of the machine ca. m︱

---

Center height 720 mm Center distance 11000 mm Turning diameter over bed 1250 mm Turning diameter over slide 1000 mm Workpiece weight max 12 to Speed 3-315 rpm - stepless Motor power 55 kW (DC) Equipment 1 position indicator HEIDENHAIN | Type ND 780 for 1 axis 1 four-jaw faceplate Ø 1000 mm 1 fixed steady rest 1 ring steady rest with four-jaw faceplate Ø 920 mm 1 Autom. 4-pos. tool holder 1 Chip conveyor 1 Machine lamp 1 Coolant device Operating key | operating manual

turning diameter 570 mm︱turning length 2000 mm︱control Heidenhain ManualPlus︱turning diameter over bed slide 340 ︱centre height 265 mm︱spindle bore 63 mm︱spindle turning speed range 1 - 2500 U/min︱rapid travel - longitudinal/face 10 / 7 m/min︱main drive motor 16 kW︱weight of the machine ca. 3,6 t︱dimensions of the machine ca. 3,8 x 2 x 2 m︱

---

* CNC-control HEIDENHAIN ManualPlus * Swarf conveyor * 2 off steady-rests

faceplate diameter 1600 mm︱swing diameter 2000 mm︱turning height 1500 mm︱Control Siemens 840 D ︱total power requirement 80 kVA︱weight of the machine ca. 25,5 t︱dimensions of the machine ca. m︱

---

General overhauling and modernized with CNC in the year 2006 Equipmemt: CNC control SIEMENS 840 D 15-pos tool changer Hydraulic 4-jaw faceplate Coolant system Coolant is fed through the ram and the tool holders to the tool cutting edge promoted. Hydraulically operated safety gates Chip conveyor Technical specifications: Faceplate diameter 1600 mm Faceplate speed range 2.5 - 315 rpm. Main engine 60 kW Largest workpiece diameter 2000 mm Size workpiece height 1500 mm Largest slider stroke 1000 mm Crossbar adjustment 800 mm Feeds 1 - 4000 mm/min. Rapid traverse 12000 mm/min. Total power consumption of the machine 80 kVA Required area 6720 x 5800 mm Machine height 5895 mm Machine weight 25.5 t

faceplate diameter 1600 mm︱swing diameter 1800 mm︱turning height 1500 mm︱Control Heidenhain ︱max. ram stroke 1200 mm︱faceplate turning speed range 0 - 200 U/min︱main drive motor 85 kW︱workpiece weight max. 8000 kg︱total power requirement kW︱weight of the machine ca. 25 t︱dimensions of the machine ca. 8,4 x 4,5 x 5,3 m︱

---

In 2007 geometrically overhauled and modernized (retrofit) * CNC-control HEIDENHAIN ManualPlus 4110 for following axes/spindles: - Right ram (axes X1 and Z1), faceplate (S) * D.R.O. make HEIDENHAIN ND 780 for following axes: - Left ram (axes X2 and Z2), crossrail * Two rams: - ram (right hand side) with 16-station ATC - ram (left hand side) with 4-station turret * Swarf conveyor

core drilling diameter max. - mm︱bore depth - mm︱swing diameter - mm︱Control Mitsubishi M 530 ︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱

---

CNC control Mitsubishi M 530 X axis 700mm Y axis 400 (800 option) mm Z axis 1000mm W axis 1100 mm Table surface 1375 x 700 mm Table load 2000 kg Tool holder SK 40 Spindle speed range 100 - 4000 rpm. Main spindle drive 3/5.5 kW Drilling capacity 25 mm Thread cutting M 20 Note: Machine without B-axis and tool changer.

x-travel 2000 mm︱y-travel 1000 mm︱z-travel 510 mm︱Control Heidenhain iTNC 530 ︱total power requirement 54 kW︱weight of the machine ca. 14 t︱dimensions of the machine ca. m︱

---

3-axis vertical machining center / double column Equipment: direct measuring system, electron. handwheel HR 410 internal coolant supply 40bar chip conveyor mode 4 software option2 BLUM laser prepared for 4. axis internalair-blast supply glass windows Operation hours: approx. 28.000 h "machine on" approx. 15.000 h "spindle on" Price of new machine around EUR 290.000,- x-travel 2.000 mm y-travel 1.000 mm z-travel 510 mm Table dimensions 2.060 x 1.000 mm turning speeds 17.000 1/min control HEIDENHAIN iTNC 530 tool taper SK 40 big plus tool change unit 40 Pos. drive capacity - spindle motor 31,5 kW total power requirement 54 kW dimensions of the machine ca. m weight of the machine ca. 14 t

x-travel 650 mm︱y-travel 650 mm︱z-travel 680 mm︱Control Siemens 840 D sl ︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱

---

x-travel 700 mm︱y-travel 700 mm︱z-travel 700 mm︱Control Siemens 840 D ︱total power requirement 75 kVA︱weight of the machine ca. 9,7 t︱dimensions of the machine ca. m︱

---

Control: CNC 3D path control, incl. TFT color screen SIEMENS 840 D solution line On hours: 31091 h Spindle running time: 25667 h TECHNICAL SPECIFICATIONS Travel range x-axis: 700 mm y-axis: 700 mm z-axis: 700 mm rotary pallet changer Number of pallets: 2 Pallet size 500 x 500 mm NC rotary table with pallet carrier Resolution: 0.001° Rotational speed 40 min-1 Drive power: 20 kW Tool holder: KSK-A63 Speed ??range up to18000 rpm automatic tool changer (vertical chain magazine) Number of tools: 60 Tool diameter: 90/160 mm Tool Length: 450mm Tool weight: 3.5 kg Chip-to-chip time: 3.7 s Operating voltage: 400V/50Hz Total connected load: 75 kVA Total installation area approx.: 25m2 Machine height: 3.4m Machine weight: 9,700 kg EQUIPMENT/ACCESSORIES - Integrated motor spindle including active cooling - Horizontal milling head - Tool changing device ATC 60 with - Double gripper - NC rotary table with pallet carrier - Rotary pallet changer - 2 pallets 500 x 500 mm - 2 pallets 630 x 630 mm - Clamping hydraulics 2/4 for work table and Set-up station for connecting hydraulically operated clamping devices - RENISHAW – Infrared – probe PP60 optical (OMP60) - Tool breakage control - mech. execution - 4-color signal lamp - Direct linear measuring systems (all axes) - Dynamic Pack - DMG Netservice - Coolant system with high-pressure pump and filtering, Tank capacity 980 l - IKZ internal coolant supply through the spindle up to 80 bar/20 l 7 pressure levels, selectable via NC program - Roof flushing 300 l/min - Coolant temperature control for IKZ - Flushing gun with pump 1 bar/40 l/m,in - Rotating lens - chip conveyor - Spare parts package - Installation elements - Documentation

x-travel 2600 mm︱y-travel 1600 mm︱z-travel 1700 mm︱Control Fanuc 16 MB ︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. 42 x 18 m︱

---

The system requires a space of approx. 42 x 18 m It is designed for "fully automatic operation" in 3 shifts. Components with tolerances of <0.01 mm were produced on the system. Equipment: CNC control Fanuc 16 MB 20-pos pallet changer Pallet size 1250 x 1000 mm Interference circle diameter up to 2700 mm Vertical tool magazine with 599 places HSK-A100 from 3 modules on 4 levels Rotary table (B-axis) with 3,600,000 angular positions Table load 4000 kg Spindle speeds 8,000 rpm. Motor power 26/37 kW Torque 605/707 Nm Chip disposal through two jet pipes in the existing central Chip disposal system Connection to an in-house central coolant system. IKZ spindle with supply of coolant through the center of the tool Cooling unit for working spindle use Electrical control cabinet with air conditioning Protective cover for the work area Protective fence cladding, sheet metal below and safety glass above, for the entire working area of ??the machine. Buffer shelf with 5 tool spaces for quick tool provision Tool cone cleaning High pressure coolant supply 65 bar Laser control of tool availability Inductive button for temperature compensation on the electrospindle Tool Monitor Renishaw button type RMP 60 Rotoclear AR aspirator Machine preparation for hydraulic clamping (on the turntable) Automation of the plant

x-travel 1050 mm︱y-travel 800 mm︱z-travel 880 mm︱Control Mazatrol 640M ︱tool taper 50 SK︱no. of tools in magazin 80 ︱pallet size: 630 x 630 mm︱numbers of pallets 2 ︱table - indexing 360 x 1° deg︱total power requirement 60,4 kVA︱weight of the machine ca. 19,7 t︱dimensions of the machine ca. m︱pallet-changer ︱

---

Transport dimensions: Width: 2,60 m Hight: 3,20 m Length: 6,40 m

x-travel 1300 mm︱y-travel 1100 mm︱z-travel 1000 mm︱Control Mazatrol ︱tool taper 50 SK︱no. of tools in magazin 80 ︱pallet size: 800 x 800 mm︱numbers of pallets 2 ︱rotary table: gesteuert 4. Achse 4-axis ︱total power requirement kVA︱weight of the machine ca. 24 t︱dimensions of the machine ca. m︱pallet-changer ︱

---

x-travel 800 mm︱y-travel 700 mm︱z-travel 610 mm︱Control Siemens 828 D ︱total power requirement kW︱weight of the machine ca. 8,7 t︱dimensions of the machine ca. m︱

---

ONLY 2800 HOURS SPINDLE WORKS Description The QUASER MF vertical machining centres are highly versatile, offering high speed, high powered machining with 4+1 and full 5-axis machining capability along with large X-axis machines with a compact footprint. Superb build quality and stability for high volume production, toolroom and subcontract machining environments. Specification Table size 500mm diameter Travels – X/Y/Z axes 800 x 700 x 610 mm A Axis + 30 deg ~ -120 deg C Axis 360 deg continous Maximum swing 630 mm Table surface to spindle nose -25mm ~ 585mm Spindle nose to tilting centre at 90 deg -25mm ~ 585mm Maximum work piece of size 630mm dia x 300mm Table load capacity 300kg Spindle taper BT40 Spindle options 10,000 / 12,000 / 15,000rpm ATC – Standard 30 Station ATC – Option 48 / 60 Station Machine weight 8750kg Features: Multi-face machining centre Siemens 828 D CNC Control 630mm maximum swing dia x 300mm high 40 Taper spindle Spindle oil chiller or ECO Chiller 30 station ATC (Options available) Coolant wash gun Coolant wash down Chip augers Cutter air blast Worklight Machine status light

x-travel 410 mm︱y-travel 610 mm︱z-travel 500 mm︱Control Siemens 828 D ︱total power requirement kW︱weight of the machine ca. 7,3 t︱dimensions of the machine ca. m︱

---

5 axis (3+2) vertical machining center Furnishing: Siemens 828 D control with Shopmill for 5 side processing (3+2), including software option network drives Portable electronic hand wheel Double-arm tool changer with 30 storage locations Large dimensioned linear guides in all axes, roller guides in the Z axis Highly dynamic digital feed drives with 6283N/6283N/12566N (X/Y/Z) axis force Computer-optimized, heavy machine body made of heavily ribbed cast iron - rapid traverse 36 m/min (Z 24 m/min), Acceleration (X/Y/Z) 4/3/2 m/sec² Cooling system for main spindle with separate 100 l oil cooling circuit and air supply for main engine 2 screw conveyors in the working area Coolant tank with a capacity of 300 l - tapping without length compensation Flood cooling, with 10 adjustable rings located on the spindle nose Outlet nozzles, flow rate 60l/min at 3.5 bar - coolant spray gun Work area full protection with large viewing door and 2 work area lights, as well as machinery Status light - air blast, external, for dry machining Two-tone paintwork in light grey/grey Automatic central lubrication for the ball screw spindles - Quaser machining centers comply with CE Standard Equipment according to CE for Quaser MF 400C Documentation for Quaser MF 400C 40 l spindle cooling oil Mobil Velocite No. 3 OPTION SPINDLE (included) Main spindle direct drive 12,000 rpm, SK 40, including temperature-controlled cooling system for the main spindle (IKZ 20 bar optional possible) OPTION IKZ (included) Internal coolant supply 20 bar, including preparation with Grundfoss pump, 25 l/min, incl. cartridge filter 25 ì CHIP CONVEYOR OPTION (included) Chip conveyor (scraper belt) for lateral disposal Specifications MF 400C Construction [h/v] vertical X-axis travel [mm] 410 Travel Y-axis [mm] 610 Z-axis travel [mm] 500 Main spindle speed max. [rpm] 10,000 Main spindle power max. [kW] 13.5/17 Number of tool magazine places [pcs] 30 Pan axis [°] +30 ~ -120 Axis of rotation [°] 360 Table/oscillation diameter [mm] 400 The table has a 300 mm clamping surface

x-travel 885 mm︱y-travel 600 mm︱z-travel 600 mm︱Control Heidenhain TNC 530 ︱total power requirement 73 kVA︱weight of the machine ca. t︱dimensions of the machine ca. m︱

---

5-axis universal machining center with swivel spindle and rotary table. The spindle was replaced in November 2017. The machine has never seen heavy cutting and runs exclusively for aluminum and ureol production. Equipment: 3D CNC control Heidenhain iTNC 530 with SMART NC Linear drives Temperature compensation in the Z-axis Active cooling unit for the drives, control cabinet and motor spindle Direct measuring system 30-pos tool changer (plate) Bed flush Tool laser measurement BLUM (tool length and diameter measurement) Heidenhain TS 640 infrared probe Signal lamp, four-colored Rotating window on the operator door Second processor card Application Tuning Cycle ATC software for selecting the one for the current editing optimal editing mode Heidenhain HR 410 hand control bar for set-up operations Operating mode 4 (process monitoring in production) Screen text German / English Documentation in German consisting of operator manual and control manual Scraper chip conveyor Travels X-axis 885 mm (increased travel)! Y-axis 600 mm Z-axis 600 mm (increased travel)! Spindle speed max. 28000 rpm. Tool holder HSK A-63 B-axis + 10 deg. to -110 deg. swivel range Max. Speed of rotation 50 rpm. Max. Torque swivel axis 750 Nm Holding torque swivel axis 1200 Nm C-axis / rotary table 360 deg. Table size 950 x 650 mm Max. Speed of rotation 100 rpm. Holding torque turntable 3000 Nm Max. Table load with rotating C-axis 600 kg Rapid traverse 90 m / min. The machine has no internal coolant supply through the work spindle!

x-travel 1016 mm︱y-travel 635 mm︱z-travel 635 mm︱total power requirement kW︱weight of the machine ca. 7077 kg︱dimensions of the machine ca. m︱

---

5 axis universal machining center Equipment: CNC control Haas (Fanuc based) including some extensions 30-fold tool changer Renishaw measuring system Security Camera Internet connection Coolant through spindle with extra filter 5-axis machining is an effective way to reduce setup time reduce and increase the accuracy of multi-sided and complex workpieces raise. The larger travels and larger platter of the Haas Universal machining centers of the UMC-1000 series make them perfect Solutions for 3+2 machining and 5-axis simultaneous machining of large parts. Highlights: 5-axis simultaneous machining Powerful spindle with inline direct drive Large capacity side mounted tool changer With wireless, intuitive measuring probe system Made in the USA traverse paths X axis 1016mm Y axis 635mm Z axis 635 mm Spindle nose to platter (~ max.)737 mm Spindle nose to platter (~ min.)102 mm spindle Max. rated power 22.4 kW Max. speed 8100 rpm. Max. torque 122.0 Nm - 2000 rpm. Cone CT or BT 40 Bearing Lubrication Air / Oil Injection Cooling Liquid Cooled B-Axis - Tilt Angle Pivoting range +110° / -30° Max speed 50°/sec Max. torque 3037 Nm Braking torque 2712 Nm C Axis - rotation Rotation range 360° Max speed 50°/sec Max. torque 2514 Nm Max. workpiece swing diameter 864 mm Braking torque 1220 Nm CNC rotary table Clamping surface diameter 635 mm Max. load capacity on platter 454.0 kg Width of T-slots 15.90 mm to 16.00 mm Center distance of the T-slots 125 mm Number of T-slots in basic configuration 7 Max. feed rate for chipping 16.5 m/min Rapid traverses at X 22.9 m/min Rapid traverse to Y 22.9 m/min Rapid traverse at Z 22.9 m/min axis motors Max. thrust X 14680 N Max. thrust Y 14680 N Max. thrust Z 18015 N tool changer Carrying capacity 30+1 30+1 Max. tool diameter (full) 64 mm Max. tool diameter (adjacent places empty) 127 mm Max. tool length (from cone line)305 mm Max. tool weight 5.4 kg Tool-to-Tool (average) 2.8 s Chip to chip (average) 3.6 s