European network of stockholding machinery dealers
+49 (0) 2389 5299080
Inquiry

Category:
    Manufacturer:
      Machines:
        Trader:
             View: 

              Search: 



          Showoffers:
          Build year From:
          1950
          Build year To:
          2022

          Klaus Rosenboom GmbH Werkzeugmaschinen-Handel GmbH - Stockist for used machines

          Machinelist:

          CNC Lathe

          used CNC Lathe HARRISON ALPHA 460 Plus

          • Klaus Rosenboom GmbH
          • Oppenheimer Str. 19
          • 28307 Bremen
          • +49 (0) 4 21 / 33 30 10
            +49 (0) 4 21 / 48 70 45
          • info@rosenboom-wzm.de
            www.rosenboom-wzm.de
          #1021-49410 · CNC Lathe

          HARRISON - ALPHA 460 Plus - - 1998 -

          Technical details
          turning diameter 460 mm︱turning length 1500 mm︱control Fanuc ︱turning diameter over bed slide 270 mm︱greates pass round over bed 460 mm︱max. swing-dia. in gap Ø 730 x 213 mm︱spindle bore diameter 76 mm︱turning speed range 155- 2000 U/min︱rapid speed 3 m/min︱number of tapers in turret head 4 RD 2 PARAT︱tail stock Ja MK︱power requirement 11/7,5 kW︱weight of the machine ca. 2,9 t︱dimensions 3,2 x 1,65 x 1,72 m︱
          Cycle-CNC-Lathe in good condition. Equipment: - Coolantsystem - PARAT toolholder head manual toolchanger - some Parat tool holders - 3- jaw chuck Röhm Ø 315 mm - Alpha link software - 3- point steady Ø 230 mm
            turning diameter 460 mm
            turning length 1500 mm
            control Fanuc
            turning diameter over bed slide 270 mm
            greates pass round over bed 460 mm
            max. swing-dia. in gap Ø 730 x 213 mm
            spindle bore diameter 76 mm
            turning speed range 155- 2000 U/min
            rapid speed 3 m/min
            number of tapers in turret head 4 RD 2 PARAT
            tail stock Ja MK
            power requirement 11/7,5 kW
            weight of the machine ca. 2,9 t
            dimensions 3,2 x 1,65 x 1,72 m
            Description :
            Cycle-CNC-Lathe in good condition.

            Equipment:

            - Coolantsystem
            - PARAT toolholder head manual toolchanger
            - some Parat tool holders
            - 3- jaw chuck Röhm Ø 315 mm
            - Alpha link software
            - 3- point steady Ø 230 mm
          Datasheet
          Request / Contact

          CNC Turning- and Milling Center

          used CNC Turning- and Milling Center MORI SEIKI NL 2000 SY 500

          • Klaus Rosenboom GmbH
          • Oppenheimer Str. 19
          • 28307 Bremen
          • +49 (0) 4 21 / 33 30 10
            +49 (0) 4 21 / 48 70 45
          • info@rosenboom-wzm.de
            www.rosenboom-wzm.de
          #1021-49810 · CNC Turning- and Milling Center

          MORI SEIKI - NL 2000 SY 500 - - 2005 -

          Technical details
          turning diameter 356 mm︱turning length 500 mm︱control MSX 850 Mapps︱max. bar diameter through the spindel 65 mm︱number of controlled axis 6 ︱turning speed range 5000 U/min︱power capacity 15 kW︱Spindle speed sub spindle 6000 U/min︱Motor power sub spindle 11 kW︱number of tapers in turret head 12 direkt︱number of driven tools in turret 12 ︱Spindel speed of driven tools 6000 U/min︱Spindelpower on driven tool 5,5 kW︱y-axis +/- 50 mm︱tail stock Gegenspindel/ sub spindle ︱dimensions 3,5 x 2,05 x 2,23 m︱weight of the machine ca. 5,8 t︱
          CNC- lathe with driven tools,Y- axis and subspindle in good condition Equipment: - 3 jaw chuck Ø 250 mm main spindle - 3 jaw chuck Kitagawa B 206 ( 150 mm) subspindle - tool setter - partscatcher - signal lamp - some fixed toolholders
            turning diameter 356 mm
            turning length 500 mm
            control MSX 850 Mapps
            max. bar diameter through the sp. 65 mm
            number of controlled axis 6
            turning speed range 5000 U/min
            power capacity 15 kW
            Spindle speed sub spindle 6000 U/min
            Motor power sub spindle 11 kW
            number of tapers in turret head 12 direkt
            number of driven tools in turret 12
            Spindel speed of driven tools 6000 U/min
            Spindelpower on driven tool 5,5 kW
            y-axis +/- 50 mm
            tail stock Gegenspindel/ sub spindle
            dimensions 3,5 x 2,05 x 2,23 m
            weight of the machine ca. 5,8 t
            Description :
            CNC- lathe with driven tools,Y- axis and subspindle in good condition

            Equipment:
            - 3 jaw chuck Ø 250 mm main spindle
            - 3 jaw chuck Kitagawa B 206 ( 150 mm) subspindle
            - tool setter
            - partscatcher
            - signal lamp
            - some fixed toolholders
          Datasheet
          Request / Contact
          used CNC Turning- and Milling Center OKUMA Mac Turn 250 W

          • Klaus Rosenboom GmbH
          • Oppenheimer Str. 19
          • 28307 Bremen
          • +49 (0) 4 21 / 33 30 10
            +49 (0) 4 21 / 48 70 45
          • info@rosenboom-wzm.de
            www.rosenboom-wzm.de
          #1021-45310 · CNC Turning- and Milling Center

          OKUMA - Mac Turn 250 W - - 2002 - OSP U 100 L

          Technical details
          turning diameter 530 mm︱turning length 1000 mm︱swing dia. 550 mm︱control OSP U 100 L ︱spindle bore 22/15 kW︱power capacity 38 - 3800 U/min︱spindle hollow 65 mm︱turning speed range 30/40/26 m/min︱number of tapers in turret head 7,5 kW︱power capacity - milling spindle 15 - 6000 U/min︱turning speed range - milling HSK 63 A ︱tool taper 44 Stück︱numbers of tools in magazin +80/-80 mm︱tail stock Gegenspindel/ sub spindle ︱speeds spindle 2 6000 U/min︱b-axis 210 °︱weight of the machine ca. 12,5 t︱dimensions 7,3 x 2,8 x 2,73 m︱
          7- Axis Turning/ Milling Centre with Milling head, sub spindle and barfeed magazin - milling head with b- axis 1° - Big Bore main spindle - sub spindle - b-axis 1° - chip conveyor - Touch Setter - IGF One Touch dialog programming - 3- jaw chuck Ø 250 mm main spindle - 3 jaw chuck Ø 150 mm sub spindel - Oil cooler - RotoClean - short barfeed magazin - parts catcher - hand wheel First Instalation 2004
            turning diameter 530 mm
            turning length 1000 mm
            swing dia. 550 mm
            control OSP U 100 L
            spindle bore 22/15 kW
            power capacity 38 - 3800 U/min
            spindle hollow 65 mm
            turning speed range 30/40/26 m/min
            number of tapers in turret head 7,5 kW
            power capacity - milling spindle 15 - 6000 U/min
            turning speed range - milling HSK 63 A
            tool taper 44 Stück
            numbers of tools in magazin +80/-80 mm
            tail stock Gegenspindel/ sub spindle
            speeds spindle 2 6000 U/min
            b-axis 210 °
            weight of the machine ca. 12,5 t
            dimensions 7,3 x 2,8 x 2,73 m
            Description :
            7- Axis Turning/ Milling Centre with Milling head, sub spindle and barfeed
            magazin

            - milling head with b- axis 1°
            - Big Bore main spindle
            - sub spindle
            - b-axis 1°
            - chip conveyor
            - Touch Setter
            - IGF One Touch dialog programming
            - 3- jaw chuck Ø 250 mm main spindle
            - 3 jaw chuck Ø 150 mm sub spindel
            - Oil cooler
            - RotoClean
            - short barfeed magazin
            - parts catcher
            - hand wheel

            First Instalation 2004
          Datasheet
          Request / Contact
          used CNC Turning- and Milling Center Gildemeister CTV 250 V3

          • Klaus Rosenboom GmbH
          • Oppenheimer Str. 19
          • 28307 Bremen
          • +49 (0) 4 21 / 33 30 10
            +49 (0) 4 21 / 48 70 45
          • info@rosenboom-wzm.de
            www.rosenboom-wzm.de
          #1021-49910 · CNC Turning- and Milling Center

          Gildemeister - CTV 250 V3 - - 2001 - Siemens 840 D

          Technical details
          turning diameter 250 mm︱turning length 300 mm︱control Siemens 840 D ︱number of controlled axis 3 ︱turning speed range 20- 5000 U/min︱power requirement 21 kW︱max. torque on the spindle 200 ︱rapid speed 15/10 m/min︱number of tapers in turret head 12 VDI 40︱number of driven tools in turret 12 ︱Spindel speed of driven tools 6000 U/min︱Spindelpower on driven tool 10,8 kW︱weight of the machine ca. 7,5 t︱Dimensions (HxWxD) 3,9 x 3,7 x 2,85 m︱
          CNC-Pick-Up-Vertical-Lathe with driven tools - chip conveyor - 3 jaw chuck Ø 250 mm - 1 driven tool holder - some fixed toolholder - parts belt 55.000 h power on,43.000 h spindle on
            turning diameter 250 mm
            turning length 300 mm
            control Siemens 840 D
            number of controlled axis 3
            turning speed range 20- 5000 U/min
            power requirement 21 kW
            max. torque on the spindle 200
            rapid speed 15/10 m/min
            number of tapers in turret head 12 VDI 40
            number of driven tools in turret 12
            Spindel speed of driven tools 6000 U/min
            Spindelpower on driven tool 10,8 kW
            weight of the machine ca. 7,5 t
            Dimensions (HxWxD) 3,9 x 3,7 x 2,85 m
            Description :
            CNC-Pick-Up-Vertical-Lathe with driven tools

            - chip conveyor
            - 3 jaw chuck Ø 250 mm
            - 1 driven tool holder
            - some fixed toolholder
            - parts belt

            55.000 h power on,43.000 h spindle on

          Datasheet
          Request / Contact
          used CNC Turning- and Milling Center OKUMA Mac Turn 30- 1 SC 1000

          • Klaus Rosenboom GmbH
          • Oppenheimer Str. 19
          • 28307 Bremen
          • +49 (0) 4 21 / 33 30 10
            +49 (0) 4 21 / 48 70 45
          • info@rosenboom-wzm.de
            www.rosenboom-wzm.de
          #1021-46410 · CNC Turning- and Milling Center

          OKUMA - Mac Turn 30- 1 SC 1000 - - 1999 -

          Technical details
          turning diameter 500 mm︱turning length 1000 mm︱swing dia. 500 mm︱control OSP 7000 ︱spindle bore 22/15 kW︱power capacity 38 - 3800 U/min︱spindle hollow 72 mm︱turning speed range 20/12/25 m/min︱number of tapers in turret head 6,8/5,5 kW︱power capacity - milling spindle 100 - 6000 U/min︱turning speed range - milling BT 40 ︱tool taper 40 Stück︱numbers of tools in magazin 190 mm︱tail stock MK 5 ︱b-axis 1 °︱weight of the machine ca. 11,0 t︱dimensions 5,6 x 2,5 x 2,36 m︱
          5- Axis Turning/ Milling Centre with Milling head. - milling head with b- axis - Big Bore main spindle A2-8 - chip conveyor - Touch Setter - IGF One Touch dialog programming - 3- jaw chuck Ø 250 mm main spindle - hydr. steady SMW SLU 3.1 - programable tailstock - helicall cutting - syncro. tapping
            turning diameter 500 mm
            turning length 1000 mm
            swing dia. 500 mm
            control OSP 7000
            spindle bore 22/15 kW
            power capacity 38 - 3800 U/min
            spindle hollow 72 mm
            turning speed range 20/12/25 m/min
            number of tapers in turret head 6,8/5,5 kW
            power capacity - milling spindle 100 - 6000 U/min
            turning speed range - milling BT 40
            tool taper 40 Stück
            numbers of tools in magazin 190 mm
            tail stock MK 5
            b-axis 1 °
            weight of the machine ca. 11,0 t
            dimensions 5,6 x 2,5 x 2,36 m
            Description :
            5- Axis Turning/ Milling Centre with Milling head.
            - milling head with b- axis
            - Big Bore main spindle A2-8
            - chip conveyor
            - Touch Setter
            - IGF One Touch dialog programming
            - 3- jaw chuck Ø 250 mm main spindle
            - hydr. steady SMW SLU 3.1
            - programable tailstock
            - helicall cutting
            - syncro. tapping

          Datasheet
          Request / Contact

          Machining Center - Universal

          used Machining Center - Universal MATSUURA MAM 72-25 V PC10

          • Klaus Rosenboom GmbH
          • Oppenheimer Str. 19
          • 28307 Bremen
          • +49 (0) 4 21 / 33 30 10
            +49 (0) 4 21 / 48 70 45
          • info@rosenboom-wzm.de
            www.rosenboom-wzm.de
          #1021-40111 · Machining Center - Universal

          MATSUURA - MAM 72-25 V PC10 - - 2006 - Fanuc G-Tech 30i

          Technical details
          x-travel 550 mm︱y-travel 410 mm︱z-travel 450 mm︱b-axis -110/+110 °︱c-axis 360.000 x 0,001 °︱control Fanuc G-Tech 30i ︱table surface area Ø 130 mm︱number of pallets 10 ︱table load 40 kg︱workpiece sizes Ø 250 x 250 mm︱turning speed range 20.000 U/min︱max. torque on the spindle 70 Nm︱power capacity - milling spindle 7,5/11 kW︱internal coolant system feed 70 bar︱rapid traverse 50 m/min︱no. of tools in the magazine 180 Stück︱tool taper BT 40 |︱dimensions 5,0 x 3,02 x 2,71 m︱weight 12,0 t︱
          full 5-axis machining Center with 10x pallet magazin in very good condition. New spindle in 2016 (15.000 h) Equipment: - NC rotating and swiveling table - full covered - spindle cooling - filter Knoll and internal coolant 70 bar - pallet changer with 10 stations - absolut scale - coolant gun - 3D probe IR OMP 60 - Blum Laser for tool lenght and diameter - Big Plus Spindle - Rotoclean - cutting force monitoring - Wiederanfahren an der Kontur - High speed control IZ2/150 NF withFast Data Server (highest level of expansion) - 600 reading out lines - air though the spindle - 3 colour signal lamp - 8 additional free M-codes - twister and band chip conveyor - tool break detection - In-process-measurement
            x-travel 550 mm
            y-travel 410 mm
            z-travel 450 mm
            b-axis -110/+110 °
            c-axis 360.000 x 0,001 °
            control Fanuc G-Tech 30i
            table surface area Ø 130 mm
            number of pallets 10
            table load 40 kg
            workpiece sizes Ø 250 x 250 mm
            turning speed range 20.000 U/min
            max. torque on the spindle 70 Nm
            power capacity - milling spindle 7,5/11 kW
            internal coolant system feed 70 bar
            rapid traverse 50 m/min
            no. of tools in the magazine 180 Stück
            tool taper BT 40 |
            dimensions 5,0 x 3,02 x 2,71 m
            weight 12,0 t
            Description :
            full 5-axis machining Center with 10x pallet magazin in very good condition.
            New spindle in 2016 (15.000 h)

            Equipment:

            - NC rotating and swiveling table
            - full covered
            - spindle cooling
            - filter Knoll and internal coolant 70 bar
            - pallet changer with 10 stations
            - absolut scale
            - coolant gun
            - 3D probe IR OMP 60
            - Blum Laser for tool lenght and diameter
            - Big Plus Spindle
            - Rotoclean
            - cutting force monitoring
            - Wiederanfahren an der Kontur
            - High speed control IZ2/150 NF withFast Data Server (highest level of
            expansion)
            - 600 reading out lines
            - air though the spindle
            - 3 colour signal lamp
            - 8 additional free M-codes
            - twister and band chip conveyor
            - tool break detection
            - In-process-measurement
          Datasheet
          Request / Contact
          used Machining Center - Universal DECKEL DMG DMC 125 U

          • Klaus Rosenboom GmbH
          • Oppenheimer Str. 19
          • 28307 Bremen
          • +49 (0) 4 21 / 33 30 10
            +49 (0) 4 21 / 48 70 45
          • info@rosenboom-wzm.de
            www.rosenboom-wzm.de
          #1021-39611 · Machining Center - Universal

          DECKEL DMG - DMC 125 U - - 1999 -

          Technical details
          x-travel 1250 mm︱y-travel 880 mm︱z-travel 800 mm︱control Heidenhain MillPlus ︱rapid speed 40 m/min︱feed speeds 15.000 | mm/min |︱table surface area 1000 x 800 mm︱table rotating 360.000 x 0,001 °︱table load 1,5 t︱numbers of pallets 2 Stück︱milling-head swivable +/- horizontal/vertikal ︱turning speed range 0 - 8.000 U/min︱tool taper SK 50 | |︱power capacity - milling spindle 28 / 19 kW︱no. of tools in the magazine 120 Stück︱weight of the machine ca. 15 t︱dimensions of the machine ca. m︱
          Universal Milling Center with high accuracy and pallet changer in good condition. Equipment: - swivelling head horizontal / vertical - chipconveyor - electronic pulshandle - high pressure coolant system 900 l through the spindle - 3D-control - Heidenhain TS 631 Probe - one extra pallet
            x-travel 1250 mm
            y-travel 880 mm
            z-travel 800 mm
            control Heidenhain MillPlus
            rapid speed 40 m/min
            feed speeds 15.000 | mm/min |
            table surface area 1000 x 800 mm
            table rotating 360.000 x 0,001 °
            table load 1,5 t
            numbers of pallets 2 Stück
            milling-head swivable +/- horizontal/vertikal
            turning speed range 0 - 8.000 U/min
            tool taper SK 50 | |
            power capacity - milling spindle 28 / 19 kW
            no. of tools in the magazine 120 Stück
            weight of the machine ca. 15 t
            Description :
            Universal Milling Center with high accuracy and pallet changer in good
            condition.
            Equipment:
            - swivelling head horizontal / vertical
            - chipconveyor
            - electronic pulshandle
            - high pressure coolant system 900 l through the spindle
            - 3D-control
            - Heidenhain TS 631 Probe
            - one extra pallet
          Datasheet
          Request / Contact

          Machining Center - Vertical

          used Machining Center - Vertical SMTCL VMC 1100 B

          • Klaus Rosenboom GmbH
          • Oppenheimer Str. 19
          • 28307 Bremen
          • +49 (0) 4 21 / 33 30 10
            +49 (0) 4 21 / 48 70 45
          • info@rosenboom-wzm.de
            www.rosenboom-wzm.de
          #1021-38211 · Machining Center - Vertical

          SMTCL - VMC 1100 B - - 2015 - Siemens 828 D

          Technical details
          x-travel 1100 mm︱y-travel 610 mm︱z-travel 650 mm︱table surface area 1300 x 610 mm︱control Siemens 828 D ︱rapid traverse 32/32/30 m/min︱table load t︱turning speed range 10.000 U/min︱max. torque on the spindle Nm︱power capacity - milling spindle kW︱internal coolant system feed 20 bar︱no. of tools in the magazine 24 Stück︱tool taper SK 40 ︱weight of the machine ca. 6 t︱dimensions 4,2 x 2,2 x 2,7 m︱
          CNC- vertical machining centre. First instalation in 2017. - coolant through the spindel 20 bar with filter - chip conveyor - spindle oil cooler - external hand wheel - Siemens with Shop Mill
            x-travel 1100 mm
            y-travel 610 mm
            z-travel 650 mm
            table surface area 1300 x 610 mm
            control Siemens 828 D
            rapid traverse 32/32/30 m/min
            turning speed range 10.000 U/min
            internal coolant system feed 20 bar
            no. of tools in the magazine 24 Stück
            tool taper SK 40
            weight of the machine ca. 6 t
            dimensions 4,2 x 2,2 x 2,7 m
            Description :
            CNC- vertical machining centre. First instalation in 2017.

            - coolant through the spindel 20 bar with filter
            - chip conveyor
            - spindle oil cooler
            - external hand wheel
            - Siemens with Shop Mill

          Datasheet
          Request / Contact
          used Machining Center - Vertical CHIRON FZ 08 W

          • Klaus Rosenboom GmbH
          • Oppenheimer Str. 19
          • 28307 Bremen
          • +49 (0) 4 21 / 33 30 10
            +49 (0) 4 21 / 48 70 45
          • info@rosenboom-wzm.de
            www.rosenboom-wzm.de
          #1021-40311 · Machining Center - Vertical

          CHIRON - FZ 08 W - - 2001 - Fanuc 21i- M

          Technical details
          x-travel 300 mm︱y-travel 250 mm︱z-travel 250 mm︱control Fanuc 21i- M ︱table surface area 2x 550 x 300 mm︱rapid traverse 40/40/60 m/min︱table load 75 kg︱turning speed range 20- 15000 U/min︱max. torque on the spindle 23 Nm︱power capacity - milling spindle 7,4 kW︱tool taper HSK- A32 |︱no. of tools in the magazine 12 Stück︱weight 2,2 t︱dimensions 2,5 x 1,3 x 2,1 m︱
          Equipment: - chipconveyor - some toolholders HSK- A32 - dual pallet changer (180° movement) - coolant system - steel drilling: Ø 16 mm/ M 12 - hydraulic plugs for automatic clamping
            x-travel 300 mm
            y-travel 250 mm
            z-travel 250 mm
            control Fanuc 21i- M
            table surface area 2x 550 x 300 mm
            rapid traverse 40/40/60 m/min
            table load 75 kg
            turning speed range 20- 15000 U/min
            max. torque on the spindle 23 Nm
            power capacity - milling spindle 7,4 kW
            tool taper HSK- A32 |
            no. of tools in the magazine 12 Stück
            weight 2,2 t
            dimensions 2,5 x 1,3 x 2,1 m
            Description :
            Equipment:

            - chipconveyor
            - some toolholders HSK- A32
            - dual pallet changer (180° movement)
            - coolant system
            - steel drilling: Ø 16 mm/ M 12
            - hydraulic plugs for automatic clamping
          Datasheet
          Request / Contact

          Universal Milling and Boring Machine

          used Universal Milling and Boring Machine DECKEL FP1

          • Klaus Rosenboom GmbH
          • Oppenheimer Str. 19
          • 28307 Bremen
          • +49 (0) 4 21 / 33 30 10
            +49 (0) 4 21 / 48 70 45
          • info@rosenboom-wzm.de
            www.rosenboom-wzm.de
          #1021-7113 · Universal Milling and Boring Machine

          DECKEL - FP1 - - ca. 1965 -

          Technical details
          x-travel 300 mm︱y-travel 150 mm︱z-travel 340 mm︱table-size 600 x 210 mm︱tool adaptor ISO 40 | |︱feed speeds 9,5 - 475 mm/min |︱turning speed range 60- 1900 U/min︱power requirement 1,5 kW︱quill stroke 60 mm︱dimensions 1,0 x 1,2 x 1,73 m︱weight of the machine ca. 0,6 t︱
          used universal milling machine - coolant system - 2 axis digital scale Sony - some tool holders - machine light
            x-travel 300 mm
            y-travel 150 mm
            z-travel 340 mm
            table-size 600 x 210 mm
            tool adaptor ISO 40 | |
            feed speeds 9,5 - 475 mm/min |
            turning speed range 60- 1900 U/min
            power requirement 1,5 kW
            quill stroke 60 mm
            dimensions 1,0 x 1,2 x 1,73 m
            weight of the machine ca. 0,6 t
            Description :
            used universal milling machine

            - coolant system
            - 2 axis digital scale Sony
            - some tool holders
            - machine light
          Datasheet
          Request / Contact
          used Universal Milling and Boring Machine DECKEL FP 4- 60 T

          • Klaus Rosenboom GmbH
          • Oppenheimer Str. 19
          • 28307 Bremen
          • +49 (0) 4 21 / 33 30 10
            +49 (0) 4 21 / 48 70 45
          • info@rosenboom-wzm.de
            www.rosenboom-wzm.de
          #1021-10212 · Universal Milling and Boring Machine

          DECKEL - FP 4- 60 T - - 1994 - Dialog 11

          Technical details
          x-travel 600 mm︱y-travel 500 mm︱z-travel 450 mm︱control Dialog 11 ︱turning speed range - main spindle 31,5-5.000 U/min︱power capacity - main spindel 7,5 kW︱tool taper SK 40 ︱table surface area Ø 500 mm︱Tool-Presetter: 30 Stück︱feeds: ︱rapid travel ( X / Y / Z ) 6 m / min. m/min︱weight of the machine ca. 4,3 t︱dimensions of the machine ca. 3,5 x 2,4 x 2,2 L/B/H m︱
          Universal Milling- and Boring Machine - full covered - coolant system - NC- rotary table - tool changer
            x-travel 600 mm
            y-travel 500 mm
            z-travel 450 mm
            control Dialog 11
            turning speed range - main spind. 31,5-5.000 U/min
            power capacity - main spindel 7,5 kW
            tool taper SK 40
            table surface area Ø 500 mm
            Tool-Presetter: 30 Stück
            rapid travel ( X / Y / Z ) 6 m / min. m/min
            weight of the machine ca. 4,3 t
            dimensions of the machine ca. 3,5 x 2,4 x 2,2 L/B/H m
            Description :
            Universal Milling- and Boring Machine

            - full covered
            - coolant system
            - NC- rotary table
            - tool changer
          9.900 €
          Datasheet
          Request / Contact

          Band Saw - Automatic

          used Band Saw - Automatic Wagner WPB 520 A

          • Klaus Rosenboom GmbH
          • Oppenheimer Str. 19
          • 28307 Bremen
          • +49 (0) 4 21 / 33 30 10
            +49 (0) 4 21 / 48 70 45
          • info@rosenboom-wzm.de
            www.rosenboom-wzm.de
          #1021-7017 · Band Saw - Automatic

          Wagner - WPB 520 A - - 2003 -

          Technical details
          cutting diameter Ø 520/ 520 x 520 mm︱saw band length 7250 x 50 mm︱cutting width 1,6 mm︱cutting speed 16- 90 m/min︱power requirement 11 kW︱dimensions m︱feed in one step 520 mm︱multiple feeding length 2080 mm︱feed speeds infinitely variable 0- 400 mm/min︱weight of the machine ca. 3,5 t︱
          Double column band saw, full automatic - Sutron BT 15 user terminal - some blades - rest pice appr. 70 mm
            cutting diameter Ø 520/ 520 x 520 mm
            saw band length 7250 x 50 mm
            cutting width 1,6 mm
            cutting speed 16- 90 m/min
            power requirement 11 kW
            feed in one step 520 mm
            multiple feeding length 2080 mm
            feed speeds infinitely variable 0- 400 mm/min
            weight of the machine ca. 3,5 t
            Description :
            Double column band saw, full automatic

            - Sutron BT 15 user terminal
            - some blades
            - rest pice appr. 70 mm
          Datasheet
          Request / Contact

          Hydr. pressbrake

          used Hydr. pressbrake AMADA HFE 170-4 L

          • Klaus Rosenboom GmbH
          • Oppenheimer Str. 19
          • 28307 Bremen
          • +49 (0) 4 21 / 33 30 10
            +49 (0) 4 21 / 48 70 45
          • info@rosenboom-wzm.de
            www.rosenboom-wzm.de
          #1021-1719 · Hydr. pressbrake

          AMADA - HFE 170-4 L - - 2000 - Amada

          Technical details
          pressure 170 t︱chamfer lenght 4230 mm︱distance between columns 3760 mm︱column arm 420 mm︱table height 960 mm︱stroke 300 mm︱control Amada ︱total power requirement 16,5 kW︱weight of the machine ca. 14,8 t︱range L-W-H 5,2 x 2,1 x 2,9 m︱
          Used CNC- press brake with 8 axis. - some tooling - 3,5" floppy disk - alignment device for tools - Infrared security device - documentation - ext. hand wheel
            pressure 170 t
            chamfer lenght 4230 mm
            distance between columns 3760 mm
            column arm 420 mm
            table height 960 mm
            stroke 300 mm
            control Amada
            total power requirement 16,5 kW
            weight of the machine ca. 14,8 t
            range L-W-H 5,2 x 2,1 x 2,9 m
            Description :
            Used CNC- press brake with 8 axis.

            - some tooling
            - 3,5" floppy disk
            - alignment device for tools
            - Infrared security device
            - documentation
            - ext. hand wheel
          Datasheet
          Request / Contact

          Clamping Cube

          used Clamping Cube UNBEKANNT

          • Klaus Rosenboom GmbH
          • Oppenheimer Str. 19
          • 28307 Bremen
          • +49 (0) 4 21 / 33 30 10
            +49 (0) 4 21 / 48 70 45
          • info@rosenboom-wzm.de
            www.rosenboom-wzm.de
          #1021-5521 · Clamping Cube

          UNBEKANNT - - - 2000 -

          Technical details
          length 140 mm︱width 140 mm︱height 500 mm︱weight of the machine ca. 0,1 t︱
          clamping cube for machining centre , 4 pcs. available. price per piece There is a socket of 300 x 200 x 120 mm, totaly hight 620 mm
            length 140 mm
            width 140 mm
            height 500 mm
            weight of the machine ca. 0,1 t
            Description :
            clamping cube for machining centre , 4 pcs. available. price per piece

            There is a socket of 300 x 200 x 120 mm, totaly hight 620 mm
          Datasheet
          Request / Contact

          toolholder

          used toolholder OKUMA WTO K 96.2013.1

          • Klaus Rosenboom GmbH
          • Oppenheimer Str. 19
          • 28307 Bremen
          • +49 (0) 4 21 / 33 30 10
            +49 (0) 4 21 / 48 70 45
          • info@rosenboom-wzm.de
            www.rosenboom-wzm.de
          #1021-5531 · toolholder

          OKUMA WTO - K 96.2013.1 - - unbekannt -

          Technical details
          tool taper VDI 40 ︱shaft cross cut 40 mm︱shaft length 92 mm︱ratio 1:1 ︱turning speeds 4000 U/min︱coolant ja / yes ︱
          Used driven tool for Okuma (LT 25 M) 2 pices available! - 2 Spindles for main- and sub spindle - coolets E 25 - ext. coolant - X= 100 mm ( surface- middle of tool) - hight 141 mm
            tool taper VDI 40
            shaft cross cut 40 mm
            shaft length 92 mm
            ratio 1:1
            turning speeds 4000 U/min
            coolant ja / yes
            Description :
            Used driven tool for Okuma (LT 25 M)
            2 pices available!

            - 2 Spindles for main- and sub spindle
            - coolets E 25
            - ext. coolant
            - X= 100 mm ( surface- middle of tool)
            - hight 141 mm
          Datasheet
          Request / Contact

          Toolholder

          used Toolholder ROSENBOOM Werkzeugwagen

          • Klaus Rosenboom GmbH
          • Oppenheimer Str. 19
          • 28307 Bremen
          • +49 (0) 4 21 / 33 30 10
            +49 (0) 4 21 / 48 70 45
          • info@rosenboom-wzm.de
            www.rosenboom-wzm.de
          #1021-155 · Toolholder

          ROSENBOOM - Werkzeugwagen - - 2020 -

          Technical details
          Number of tools 36 St.︱dimensions 0,72 x 0,56x 0,95 m︱weight 27 kg︱
          New movable tool trolley for toolholders with 40' taper or optional for VDI 40 toolholders. Each row is easily removable. The trolley will be packed for transport and be delivered without any toolholders. Variations in color are possible.
            Number of tools 36 St.
            dimensions 0,72 x 0,56x 0,95 m
            weight 27 kg
            Description :
            New movable tool trolley for toolholders with 40' taper or optional for VDI 40 toolholders. Each row is easily removable. The trolley will be packed for transport and be delivered without any toolholders. Variations in color are possible.
          Datasheet
          Request / Contact
          used Toolholder ROSENBOOM Werkzeugwagen

          • Klaus Rosenboom GmbH
          • Oppenheimer Str. 19
          • 28307 Bremen
          • +49 (0) 4 21 / 33 30 10
            +49 (0) 4 21 / 48 70 45
          • info@rosenboom-wzm.de
            www.rosenboom-wzm.de
          #1021-1355 · Toolholder

          ROSENBOOM - Werkzeugwagen - - 2020 -

          Technical details
          Number of tools 30 St.︱dimensions 0,72 x 0,56x 0,95 m︱weight 27 kg︱
          New movable tool trolley for toolholders with 50' taper. Each row is easily removable. The trolley will be packed for transport and be delivered without any toolholders. Variations in color are possible.
            Number of tools 30 St.
            dimensions 0,72 x 0,56x 0,95 m
            weight 27 kg
            Description :
            New movable tool trolley for toolholders with 50' taper. Each row is easily removable. The trolley will be packed for transport and be delivered without any toolholders. Variations in color are possible.

          Datasheet
          Request / Contact

          Vise

          used Vise SCHRAUBSTOCK HYD. Hydraulisch

          • Klaus Rosenboom GmbH
          • Oppenheimer Str. 19
          • 28307 Bremen
          • +49 (0) 4 21 / 33 30 10
            +49 (0) 4 21 / 48 70 45
          • info@rosenboom-wzm.de
            www.rosenboom-wzm.de
          #1021-555 · Vise

          SCHRAUBSTOCK HYD. - Hydraulisch - - 1990 -

          Technical details
          thickness of jaw 200 mm︱weight of the machine ca. 100 kg︱distance of clamping jaw max. 420 mm︱dimensions of the machine ca. 700 x 230 x 170 mm cm︱
            thickness of jaw 200 mm
            weight of the machine ca. 100 kg
            distance of clamping jaw max. 420 mm
            dimensions of the machine ca. 700 x 230 x 170 mm cm
          Datasheet
          Request / Contact
          used Vise OML Nullpunktspannsystem 140 APS- E APS-I

          • Klaus Rosenboom GmbH
          • Oppenheimer Str. 19
          • 28307 Bremen
          • +49 (0) 4 21 / 33 30 10
            +49 (0) 4 21 / 48 70 45
          • info@rosenboom-wzm.de
            www.rosenboom-wzm.de
          #1021-3055 · Vise

          OML Nullpunktspannsystem - 140 APS- E APS-I - - -

          Technical details
          thickness of jaw 130 mm︱base plate 760 x 350 mm︱flute distance 100 mm︱distance between the rotary tables 200 mm︱positions 6 ︱weight of the machine ca. 0,2 t︱dimensions of the machine ca. 760 x 600 mm︱
          used Zero point clamping system - groundplate with 6 stations - 2x hydraulice vice OML VP 130 - pneumatic aktivation - coverplates for two stations
            thickness of jaw 130 mm
            base plate 760 x 350 mm
            flute distance 100 mm
            distance between the rotary tabl. 200 mm
            positions 6
            weight of the machine ca. 0,2 t
            dimensions of the machine ca. 760 x 600 mm
            Description :
            used Zero point clamping system

            - groundplate with 6 stations
            - 2x hydraulice vice OML VP 130
            - pneumatic aktivation
            - coverplates for two stations
          Datasheet
          Request / Contact
          •   
          •   
          • 1  
          •   
          •   
          Klaus Rosenboom GmbH Werkzeugmaschinen-Handel GmbH 28307 - Bremen Oppenheimer Str. 19
          Klaus Rosenboom GmbH Werkzeugmaschinen-Handel GmbH

          Oppenheimer Str. 19



          Contact Trader


            Klaus Rosenboom GmbH Werkzeugmaschinen-Handel GmbH
           Oppenheimer Str. 19
            28307 - Bremen
           
            +49 (0) 4 21 / 33 30 10
            +49 (0) 4 21 / 48 70 45
            info@rosenboom-wzm.de
            www.rosenboom-wzm.de
            Contact person:
           

          Trader Profile



          Machine category


          Abkantpresse - hydraulisch · Aufspannwürfel · Bandsäge - Automatisch · Bearbeitungszentrum - Universal · Bearbeitungszentrum - Vertikal · CNC Dreh- und Fräszentrum · CNC Drehmaschine · Schraubstock · Universal-Fräs- und Bohrmaschine · Werkzeughalter · Werkzeughalter (angetrieben) ·
          Compendium
          Software
          Used machines content
          Privacy
          Follow us
          ©2000 - 2022, Logotech oHG · Software- and Internet Services - All rights reserved