European network of stockholding machinery dealers

Category:
    Manufacturer:
      Machines:
        Trader:

          Karl Günter Wirths GmbH - Stockist for used machines

          Machinelist:


          Center Lathe

          used  Center Lathe PBR T-600 LC


          • Karl Günter Wirths GmbH
          • Scharpenberger Strasse 96-98
          • 58256 Ennepetal
          • Deutschland

          • 02333-79050
            02333-790555
          • sales@wirths.net
            www.wirths.net
          #1041-2000127 · Center Lathe

          PBR - T-600 LC - - 1994 -

          Technical details
          turning diameter over bed 1230 mm︱turning diameter over slide 890 mm︱turning length 3000 mm︱spindle passage 150 mm︱turning speeds 4-800 U/min︱main drive motor 30 HP/PS︱feed - longitudinal/cross 0,05- 22,4 mm/rev (U)︱rapid travel - longitudinal/face 2,5 m/min︱rapid return speed 5 m/min︱max. workpiece weight between centres 5000 kg︱bed width 670 mm︱face slide travel 640 mm︱weight of the machine ca. 9,2 t︱dimensions of the machine ca. 5,5 x 1,75 x 1,6 m︱
          Machine has a moving steady and a fixed steady. It has some accessories, Multifix holder, 3 jaw chuck and DRO.
            turning diameter over bed 1230 mm
            turning diameter over slide 890 mm
            turning length 3000 mm
            spindle passage 150 mm
            turning speeds 4-800 U/min
            main drive motor 30 HP/PS
            feed - longitudinal/cross 0,05- 22,4 mm/rev (U)
            rapid travel - longitudinal/face 2,5 m/min
            rapid return speed 5 m/min
            max. workpiece weight between ce. 5000 kg
            bed width 670 mm
            face slide travel 640 mm
            weight of the machine ca. 9,2 t
            dimensions of the machine ca. 5,5 x 1,75 x 1,6 m
            Description :
            Machine has a moving steady and a fixed steady. It has some accessories,
            Multifix holder, 3 jaw chuck and DRO.
          Datasheet
          Request / Contact
          used  Center Lathe NARDINI MS 175 E


          • Karl Günter Wirths GmbH
          • Scharpenberger Strasse 96-98
          • 58256 Ennepetal
          • Deutschland

          • 02333-79050
            02333-790555
          • sales@wirths.net
            www.wirths.net
          #1041-2000129 · Center Lathe

          NARDINI - MS 175 E - - 1990 -

          Technical details
          turning diameter over bed 0350 mm︱turning diameter over slide rest 205 mm︱turning length 800 mm︱spindle turning speed range 50 - 2000 U/min︱spindle bore 40 mm︱feeds: bed slide/longitudinal 0,042 - 0,929 mm/U︱feeds - cross 0,015 - 0,338 mm/U︱total power requirement 4,1 kW︱weight of the machine ca. 1,2 t︱dimensions of the machine ca. 2,5 x 1,2 x 1,5 m︱
            turning diameter over bed 0350 mm
            turning diameter over slide rest 205 mm
            turning length 800 mm
            spindle turning speed range 50 - 2000 U/min
            spindle bore 40 mm
            feeds: bed slide/longitudinal 0,042 - 0,929 mm/U
            feeds - cross 0,015 - 0,338 mm/U
            total power requirement 4,1 kW
            weight of the machine ca. 1,2 t
            dimensions of the machine ca. 2,5 x 1,2 x 1,5 m
          Datasheet
          Request / Contact
          used  Center Lathe ERDMANN SH500x2500


          • Karl Günter Wirths GmbH
          • Scharpenberger Strasse 96-98
          • 58256 Ennepetal
          • Deutschland

          • 02333-79050
            02333-790555
          • sales@wirths.net
            www.wirths.net
          #1041-2000130 · Center Lathe

          ERDMANN - SH500x2500 - - 1990 -

          Technical details
          turning diameter over bed 1000 mm︱turning diameter over slide rest 680 mm︱turning length 2500 mm︱spindle turning speed range 10- 1000 U/min︱voltage 400 V︱feed per revolution mm︱rapid travel - longitudinal/face m/min︱spindle bore 80 mm︱total power requirement 10 kW︱weight of the machine ca. 7 kg︱dimensions of the machine ca. 6 x 1,8 x 1,6 m︱
            turning diameter over bed 1000 mm
            turning diameter over slide rest 680 mm
            turning length 2500 mm
            spindle turning speed range 10- 1000 U/min
            voltage 400 V
            spindle bore 80 mm
            total power requirement 10 kW
            weight of the machine ca. 7 kg
            dimensions of the machine ca. 6 x 1,8 x 1,6 m
            Description :

          Datasheet
          Request / Contact
          used  Center Lathe MONDIALE Celtic 14


          • Karl Günter Wirths GmbH
          • Scharpenberger Strasse 96-98
          • 58256 Ennepetal
          • Deutschland

          • 02333-79050
            02333-790555
          • sales@wirths.net
            www.wirths.net
          #1041-2000120 · Center Lathe

          MONDIALE - Celtic 14 - - 1981 -

          Technical details
          turning diameter over bed 0370 mm︱turning diameter over slide rest 240 mm︱turning length 1500 mm︱spindle turning speed range 36- 1600 U/min︱voltage 400 V︱feed per revolution mm︱rapid travel - longitudinal/face m/min︱spindle bore 35 mm︱total power requirement 3 kW︱weight of the machine ca. 1500 kg︱dimensions of the machine ca. 3 x 1,1 x 1,5 m︱
            turning diameter over bed 0370 mm
            turning diameter over slide rest 240 mm
            turning length 1500 mm
            spindle turning speed range 36- 1600 U/min
            voltage 400 V
            spindle bore 35 mm
            total power requirement 3 kW
            weight of the machine ca. 1500 kg
            dimensions of the machine ca. 3 x 1,1 x 1,5 m
            Description :

          Datasheet
          Request / Contact
          used  Center Lathe VDF- HEIDENREICH & HARBECK V 3


          • Karl Günter Wirths GmbH
          • Scharpenberger Strasse 96-98
          • 58256 Ennepetal
          • Deutschland

          • 02333-79050
            02333-790555
          • sales@wirths.net
            www.wirths.net
          #1041-2000128 · Center Lathe

          VDF- HEIDENREICH & HARBECK - V 3 - - 1965 -

          Technical details
          turning diameter over bed 0560 mm︱turning diameter over slide rest 300 mm︱turning length 2000 mm︱centre height 280 mm︱spindle bore 65 mm︱spindle turning speed range 12-1150 U/min︱feeds longitudinal slide 0,056 - 2 mm/r︱feeds of cross-slide 0,025 - 0,9 mm/r︱total power requirement 5 kW︱weight of the machine ca. 5 t︱dimensions of the machine ca. 4,5 x 1,8 x 1,6 m︱
          Machine will be supplied with quick tool change devise, three jaw chuck, steady rest and DRO.
            turning diameter over bed 0560 mm
            turning diameter over slide rest 300 mm
            turning length 2000 mm
            centre height 280 mm
            spindle bore 65 mm
            spindle turning speed range 12-1150 U/min
            feeds longitudinal slide 0,056 - 2 mm/r
            feeds of cross-slide 0,025 - 0,9 mm/r
            total power requirement 5 kW
            weight of the machine ca. 5 t
            dimensions of the machine ca. 4,5 x 1,8 x 1,6 m
            Description :
            Machine will be supplied with quick tool change devise, three jaw chuck, steady
            rest and DRO.
          Datasheet
          Request / Contact

          CNC Turning- and Milling Center

          used  CNC Turning- and Milling Center MORI SEIKI NL 2500 SY / 700


          • Karl Günter Wirths GmbH
          • Scharpenberger Strasse 96-98
          • 58256 Ennepetal
          • Deutschland

          • 02333-79050
            02333-790555
          • sales@wirths.net
            www.wirths.net
          #1041-203419 · CNC Turning- and Milling Center

          MORI SEIKI - NL 2500 SY / 700 - - 2010 - MSX-850IV

          Technical details
          turning diameter 366 mm︱turning length 705 mm︱spindle bore diameter 80 mm︱Spindle Speed 4.000 1/min︱spindle motor 18,5/15 kW︱X-Axis movement 260 mm︱Y-Axis movement 50 mm︱Z-Axis movement 795 mm︱Minimum indexing C-Axis main Spindle 0,001 °︱Number of tools on turret 12 ︱Spindle speed driven tools 6.000 1/min︱Spindle motor driven tools 5,5/3,7 kW︱Tool type BMT ︱control MSX-850IV ︱Required floor space 3795 x 1925 mm︱Weight 6100 kg︱Bar feeder ︱Chip conveyor ︱Signal-Light/Machine operation light ︱Chuck
          Control MSX-850IV. Machine has main spindle and sub spindle, bar loader with 3 m, chip conveyor, part collection and high preasur pump with 30 bar. Machine will be supplied with chuck at main spindle and at sub spindle. We will supply some tool holders along with the machine.
            turning diameter 366 mm
            turning length 705 mm
            spindle bore diameter 80 mm
            Spindle Speed 4.000 1/min
            spindle motor 18,5/15 kW
            X-Axis movement 260 mm
            Y-Axis movement 50 mm
            Z-Axis movement 795 mm
            Minimum indexing C-Axis main Spi. 0,001 °
            Number of tools on turret 12
            Spindle speed driven tools 6.000 1/min
            Spindle motor driven tools 5,5/3,7 kW
            Tool type BMT
            control MSX-850IV
            Required floor space 3795 x 1925 mm
            Weight 6100 kg
            Description :
            Control MSX-850IV. Machine has main spindle and sub spindle, bar loader with 3
            m, chip conveyor, part collection and high preasur pump with 30 bar. Machine
            will be supplied with chuck at main spindle and at sub spindle. We will supply
            some tool holders along with the machine.
          Datasheet
          Request / Contact
          used  CNC Turning- and Milling Center MORI SEIKI NL 2500 SY / 700


          • Karl Günter Wirths GmbH
          • Scharpenberger Strasse 96-98
          • 58256 Ennepetal
          • Deutschland

          • 02333-79050
            02333-790555
          • sales@wirths.net
            www.wirths.net
          #1041-203420 · CNC Turning- and Milling Center

          MORI SEIKI - NL 2500 SY / 700 - - 2008 - MSX-850III

          Technical details
          turning diameter 366 mm︱turning length 705 mm︱spindle bore diameter 80 mm︱Spindle Speed 4.000 1/min︱spindle motor 18,5/15 kW︱X-Axis movement 260 mm︱Y-Axis movement 50 mm︱Z-Axis movement 795 mm︱Minimum indexing C-Axis main Spindle 0,001 °︱Number of tools on turret 12 ︱Spindle speed driven tools 6.000 1/min︱Spindle motor driven tools 5,5/3,7 kW︱Tool type BMT ︱control MSX-850III ︱Required floor space 3795 x 1925 mm︱Weight 6100 kg︱Bar feeder ︱Chip conveyor ︱Signal-Light/Machine operation light ︱Chuck
          Control MSX-850III. Machine has main spindle and sub spindle, bar loader with 3 m, chip conveyor, part collection and high preasur pump with 30 bar. Machine will be supplied with chuck at main spindle and at sub spindle. We will supply some tool holders along with the machine.
            turning diameter 366 mm
            turning length 705 mm
            spindle bore diameter 80 mm
            Spindle Speed 4.000 1/min
            spindle motor 18,5/15 kW
            X-Axis movement 260 mm
            Y-Axis movement 50 mm
            Z-Axis movement 795 mm
            Minimum indexing C-Axis main Spi. 0,001 °
            Number of tools on turret 12
            Spindle speed driven tools 6.000 1/min
            Spindle motor driven tools 5,5/3,7 kW
            Tool type BMT
            control MSX-850III
            Required floor space 3795 x 1925 mm
            Weight 6100 kg
            Description :
            Control MSX-850III. Machine has main spindle and sub spindle, bar loader with 3
            m, chip conveyor, part collection and high preasur pump with 30 bar. Machine
            will be supplied with chuck at main spindle and at sub spindle. We will supply
            some tool holders along with the machine.
          Datasheet
          Request / Contact

          Facing and Centering Lathe

          used  Facing and Centering Lathe ZERBST WMW DP1S3


          • Karl Günter Wirths GmbH
          • Scharpenberger Strasse 96-98
          • 58256 Ennepetal
          • Deutschland

          • 02333-79050
            02333-790555
          • sales@wirths.net
            www.wirths.net
          #1041-2020 · Facing and Centering Lathe

          ZERBST WMW - DP1S3 - - 1990 -

          Technical details
          turning diameter over bed 1600 mm︱turning diameter over slide rest 1000 mm︱turning length 4000 mm︱faceplate diameter 1250 mm︱turning diameter over bed 1600 mm︱spindle bore 100 mm︱spindle turning speed range 3,55 - 450 U/min︱max. workpiece weight between centers 10000 kg︱rapid traverse 6 m/min︱total power requirement 30 kW︱weight of the machine ca. 20 t︱dimensions of the machine ca. 7 x 2,5 x 2,3 m︱
          Machines was reconditioned and modernized with new electrica in 2010. We will supply a fixed and a movable steady along with the machine. Furthermore we will supply some centers along with the machine.
            turning diameter over bed 1600 mm
            turning diameter over slide rest 1000 mm
            turning length 4000 mm
            faceplate diameter 1250 mm
            turning diameter over bed 1600 mm
            spindle bore 100 mm
            spindle turning speed range 3,55 - 450 U/min
            max. workpiece weight between ce. 10000 kg
            rapid traverse 6 m/min
            total power requirement 30 kW
            weight of the machine ca. 20 t
            dimensions of the machine ca. 7 x 2,5 x 2,3 m
            Description :
            Machines was reconditioned and modernized with new electrica in 2010. We will
            supply a fixed and a movable steady along with the machine. Furthermore we will
            supply some centers along with the machine.
          Datasheet
          Request / Contact

          Lathe - cycle-controlled

          used  Lathe -  cycle-controlled SAILO Contur Dialog H 66


          • Karl Günter Wirths GmbH
          • Scharpenberger Strasse 96-98
          • 58256 Ennepetal
          • Deutschland

          • 02333-79050
            02333-790555
          • sales@wirths.net
            www.wirths.net
          #1041-203409 · Lathe - cycle-controlled

          SAILO - Contur Dialog H 66 - - 2003 - Siemens 810 D

          Technical details
          turning diameter 0660 mm︱turning length 2000 mm︱control Siemens 810 D ︱turning dia. over face-slide 400 mm︱turret head 8 Pos. ︱bed width 433 mm︱max. workpiece weight between centers 2000 kg︱spindle turning speed range 2- 2500 U/min︱spindle bore 105 mm︱cross movement 340 mm︱longitudinal travel 1980 mm︱rapid traverse X-axis 8 m/min︱rapid traverse Z-axis 8 m/min︱total power requirement 22 kW︱weight of the machine ca. 4,7 t︱dimensions of the machine ca. 4 x 2,3 x 2 m︱
          Accessories: 3 jaw chuck hand operated and 3 toolholder for turret VDI 40.
            turning diameter 0660 mm
            turning length 2000 mm
            control Siemens 810 D
            turning dia. over face-slide 400 mm
            turret head 8 Pos.
            bed width 433 mm
            max. workpiece weight between ce. 2000 kg
            spindle turning speed range 2- 2500 U/min
            spindle bore 105 mm
            cross movement 340 mm
            longitudinal travel 1980 mm
            rapid traverse X-axis 8 m/min
            rapid traverse Z-axis 8 m/min
            total power requirement 22 kW
            weight of the machine ca. 4,7 t
            dimensions of the machine ca. 4 x 2,3 x 2 m
            Description :
            Accessories: 3 jaw chuck hand operated and 3 toolholder for turret VDI 40.
          Datasheet
          Request / Contact
          used  Lathe -  cycle-controlled GORNATI CMG 750 NSXP


          • Karl Günter Wirths GmbH
          • Scharpenberger Strasse 96-98
          • 58256 Ennepetal
          • Deutschland

          • 02333-79050
            02333-790555
          • sales@wirths.net
            www.wirths.net
          #1041-203402 · Lathe - cycle-controlled

          GORNATI - CMG 750 NSXP - - 1999 - Fagor 8055 T

          Technical details
          turning diameter 1500 mm︱turning length 1500 mm︱control Fagor 8055 T ︱turning diameter over bed slide 1250 mm︱total power requirement 45 kW︱weight of the machine ca. 12 t︱dimensions of the machine ca. 4 x 2,4 x 2,4 m︱
          Zubehör: Vierbackenfutter mit Backen, manuell betätigt, 7 Multifix Halter und ein Halter auf Capto.
            turning diameter 1500 mm
            turning length 1500 mm
            control Fagor 8055 T
            turning diameter over bed slide 1250 mm
            total power requirement 45 kW
            weight of the machine ca. 12 t
            dimensions of the machine ca. 4 x 2,4 x 2,4 m
            Description :
            Zubehör: Vierbackenfutter mit Backen, manuell betätigt, 7 Multifix Halter und
            ein Halter auf Capto.
          Datasheet
          Request / Contact

          Vertical Turret Lathe - Single Column

          used  Vertical Turret Lathe - Single Column DOERRIES VCE 125/160


          • Karl Günter Wirths GmbH
          • Scharpenberger Strasse 96-98
          • 58256 Ennepetal
          • Deutschland

          • 02333-79050
            02333-790555
          • sales@wirths.net
            www.wirths.net
          #1041-40094 · Vertical Turret Lathe - Single Column

          DOERRIES - VCE 125/160 - - 1983 - S 840 D

          Technical details
          faceplate diameter 1250 mm︱swing diameter 1600 mm︱turning height 1400 mm︱Control S 840 D ︱faceplate turning speed range 0- 280 U/min︱workpiece weight max. 12000 kg︱tool change unit 10 Pos.︱total power requirement 95 kW︱weight of the machine ca. 25 t︱dimensions of the machine ca. 3,5 x 3,2 x 5,1 m︱
          Machine was originally built in 1983 but retrofitted in 2007. Control: Siemens 840 D. Machine does have a three jaw faceplate. The faceplate on the photos is not with the machine.
            faceplate diameter 1250 mm
            swing diameter 1600 mm
            turning height 1400 mm
            Control S 840 D
            faceplate turning speed range 0- 280 U/min
            workpiece weight max. 12000 kg
            tool change unit 10 Pos.
            total power requirement 95 kW
            weight of the machine ca. 25 t
            dimensions of the machine ca. 3,5 x 3,2 x 5,1 m
            Description :
            Machine was originally built in 1983 but retrofitted in 2007. Control: Siemens
            840 D. Machine does have a three jaw faceplate. The faceplate on the photos
            is not with the machine.
          Datasheet
          Request / Contact

          Machining Center - Universal

          used  Machining Center - Universal DECKEL-MAHO DMU 60 T


          • Karl Günter Wirths GmbH
          • Scharpenberger Strasse 96-98
          • 58256 Ennepetal
          • Deutschland

          • 02333-79050
            02333-790555
          • sales@wirths.net
            www.wirths.net
          #1041-10163 · Machining Center - Universal

          DECKEL-MAHO - DMU 60 T - - 2000 -

          Technical details
          x-travel 0630 mm︱y-travel 560 mm︱z-travel 560 mm︱turning speeds 12.000 U/min︱feed speeds 20-10.000 mm/min︱ 26/26/20 m/min︱ 24-fach ︱spindle taper SK 40 ︱table surface area 1000x600 mm︱total power requirement 26 kW︱weight of the machine ca. 6.500 t︱dimensions of the machine ca. m︱
          Accessories: B-axe (Rotation of head), 24 Pos. ATC with 2 discs, electronic hand wheel, chip conveying worm and cooling arrangement. Machine has cooling through spindle. Control: Heidenhain 430
            x-travel 0630 mm
            y-travel 560 mm
            z-travel 560 mm
            turning speeds 12.000 U/min
            feed speeds 20-10.000 mm/min
            26/26/20 m/min
            24-fach
            spindle taper SK 40
            table surface area 1000x600 mm
            total power requirement 26 kW
            weight of the machine ca. 6.500 t
            Description :
            Accessories: B-axe (Rotation of head), 24 Pos. ATC with 2 discs, electronic
            hand wheel, chip conveying worm and cooling arrangement. Machine has cooling
            through spindle. Control: Heidenhain 430
          Datasheet
          Request / Contact

          Machining Center - Vertical

          used  Machining Center - Vertical CHIRON FZ 12 S Magnum Highspeed


          • Karl Günter Wirths GmbH
          • Scharpenberger Strasse 96-98
          • 58256 Ennepetal
          • Deutschland

          • 02333-79050
            02333-790555
          • sales@wirths.net
            www.wirths.net
          #1041-10176 · Machining Center - Vertical

          CHIRON - FZ 12 S Magnum Highspeed - - 2000 -

          Technical details
          x-travel 0550 mm︱y-travel 300 mm︱z-travel 425 mm︱table-size 950 x 660 mm︱spindle diameter 65 mm︱tool taper SK 40 ︱spindle turning speed - stepless 20 - 10500 U/min︱feeds 1- 30000 mm/min︱rapid traverse 30000 mm/min︱electrics - voltage/frequency 380 / 50 V/Hz︱spindle drive 12 kW︱connected load 23 kVA︱dimensions of the machine ca. 3,8 x2,2 x 2,2 m︱weight of the machine ca. 4 t︱
          Control: Siemens 810 C.
            x-travel 0550 mm
            y-travel 300 mm
            z-travel 425 mm
            table-size 950 x 660 mm
            spindle diameter 65 mm
            tool taper SK 40
            spindle turning speed - stepless 20 - 10500 U/min
            feeds 1- 30000 mm/min
            rapid traverse 30000 mm/min
            electrics - voltage/frequency 380 / 50 V/Hz
            spindle drive 12 kW
            connected load 23 kVA
            dimensions of the machine ca. 3,8 x2,2 x 2,2 m
            weight of the machine ca. 4 t
            Description :
            Control: Siemens 810 C.
          Datasheet
          Request / Contact
          used  Machining Center - Vertical MAZAK VTC 20 B


          • Karl Günter Wirths GmbH
          • Scharpenberger Strasse 96-98
          • 58256 Ennepetal
          • Deutschland

          • 02333-79050
            02333-790555
          • sales@wirths.net
            www.wirths.net
          #1041-10172 · Machining Center - Vertical

          MAZAK - VTC 20 B - - 1999 - Mazatrol M 32 B

          Technical details
          x-travel 1120 mm︱y-travel 510 mm︱z-travel 510 mm︱Control Mazatrol M 32 B ︱table-size 1460 x 510 mm︱feeds 1- 20000 mm/min︱rapid traverse 24/24/20 m/min︱spindle turning speed - stepless 40- 7000 U/min︱spindle taper ISO 40 ︱tool change unit 24 Pos.︱total power requirement 20 KVA︱weight of the machine ca. 5,85 t︱dimensions of the machine ca. 4,7 x 2,9 x 2,7 m︱
          Machine will be supplied with some tool holders and is ready for work. Machine comes with a chip conveyor.
            x-travel 1120 mm
            y-travel 510 mm
            z-travel 510 mm
            Control Mazatrol M 32 B
            table-size 1460 x 510 mm
            feeds 1- 20000 mm/min
            rapid traverse 24/24/20 m/min
            spindle turning speed - stepless 40- 7000 U/min
            spindle taper ISO 40
            tool change unit 24 Pos.
            total power requirement 20 KVA
            weight of the machine ca. 5,85 t
            dimensions of the machine ca. 4,7 x 2,9 x 2,7 m
            Description :
            Machine will be supplied with some tool holders and is ready for work. Machine
            comes with a chip conveyor.
          Datasheet
          Request / Contact

          Milling Machining Centers 5 Axis

          used  Milling Machining Centers 5 Axis HUBER + GRIMME HG3000T


          • Karl Günter Wirths GmbH
          • Scharpenberger Strasse 96-98
          • 58256 Ennepetal
          • Deutschland

          • 02333-79050
            02333-790555
          • sales@wirths.net
            www.wirths.net
          #1041-26744 · Milling Machining Centers 5 Axis

          HUBER + GRIMME - HG3000T - - 1996 - NUM

          Technical details
          x-travel 3000 mm︱y-travel 2500 mm︱z-travel 400 mm︱Control NUM ︱c-axis 0-360 °︱b-axis 0-360 °︱spindle turning speed range 0- 30000 U/min︱rapid traverse 50 m/min︱total power requirement 12 kW︱weight of the machine ca. 4 t︱dimensions of the machine ca. 4 x 3 x 2 m︱
          5 axes machining center to work on wood or plastic. Machine has two tables and 6 position tool changer (ATC) at each table.
            x-travel 3000 mm
            y-travel 2500 mm
            z-travel 400 mm
            Control NUM
            c-axis 0-360 °
            b-axis 0-360 °
            spindle turning speed range 0- 30000 U/min
            rapid traverse 50 m/min
            total power requirement 12 kW
            weight of the machine ca. 4 t
            dimensions of the machine ca. 4 x 3 x 2 m
            Description :
            5 axes machining center to work on wood or plastic. Machine has two tables and
            6 position tool changer (ATC) at each table.
          Datasheet
          Request / Contact

          Pillar Drilling Machine

          used  Pillar Drilling Machine ALZMETALL AB 4 SV


          • Karl Günter Wirths GmbH
          • Scharpenberger Strasse 96-98
          • 58256 Ennepetal
          • Deutschland

          • 02333-79050
            02333-790555
          • sales@wirths.net
            www.wirths.net
          #1041-50068 · Pillar Drilling Machine

          ALZMETALL - AB 4 SV - - 1975 -

          Technical details
          bore capacity in steel (diameter) 40 mm︱throat 300 mm︱bore stroke 180 mm︱table surface area 615 x 420 mm︱0 50- 640 U/min︱feed 0,1 - 0,2 - 0,3 mm/U︱total power requirement 2,2 kW︱weight of the machine ca. 0,6 t︱dimensions of the machine ca. 0,8 x 0,7 x 2,0 m︱
          Pillar drill with - Thread cutting device - Feed
            bore capacity in steel (diameter. 40 mm
            throat 300 mm
            bore stroke 180 mm
            table surface area 615 x 420 mm
            0 50- 640 U/min
            feed 0,1 - 0,2 - 0,3 mm/U
            total power requirement 2,2 kW
            weight of the machine ca. 0,6 t
            dimensions of the machine ca. 0,8 x 0,7 x 2,0 m
            Description :
            Pillar drill with
            - Thread cutting device
            - Feed

          Datasheet
          Request / Contact

          Rapid Radial Drilling Machine

          used  Rapid Radial Drilling Machine DONAU DR 23


          • Karl Günter Wirths GmbH
          • Scharpenberger Strasse 96-98
          • 58256 Ennepetal
          • Deutschland

          • 02333-79050
            02333-790555
          • sales@wirths.net
            www.wirths.net
          #1041-60098 · Rapid Radial Drilling Machine

          DONAU - DR 23 - - 1974 -

          Technical details
          bore capacity in steel (diameter) 23 mm︱arm length 650 mm︱table surface area 1200x800 mm︱swivable table: 700x240 mm︱feed - independent 0,075-0,3 mm︱turning speeds 70-1550 U/min︱total power requirement kW︱weight of the machine ca. 2 t︱dimensions of the machine ca. 2 x 1,6 x 1,9 m︱
            bore capacity in steel (diameter. 23 mm
            arm length 650 mm
            table surface area 1200x800 mm
            swivable table: 700x240 mm
            feed - independent 0,075-0,3 mm
            turning speeds 70-1550 U/min
            weight of the machine ca. 2 t
            dimensions of the machine ca. 2 x 1,6 x 1,9 m
          Datasheet
          Request / Contact

          Table Type Boring and Milling Machine

          used  Table Type Boring and Milling Machine TOS WHQ13


          • Karl Günter Wirths GmbH
          • Scharpenberger Strasse 96-98
          • 58256 Ennepetal
          • Deutschland

          • 02333-79050
            02333-790555
          • sales@wirths.net
            www.wirths.net
          #1041-70100 · Table Type Boring and Milling Machine

          TOS - WHQ13 - - 2012 - S 840 D

          Technical details
          spindle diameter 130 mm︱x-travel 4000 mm︱y-travel 2500 mm︱Control S 840 D ︱z-travel 1600 mm︱W-axis (spindle longitudinal) 800 mm︱table-size 2500 x 1800 mm︱max. workpiece weight 12000 kg︱tool taper ISO 50 ︱spindle turning speed range 10- 3000 U/min︱total power requirement 55 kW︱weight of the machine ca. 50 t︱dimensions of the machine ca. 6 x 6 x 4 m︱
            spindle diameter 130 mm
            x-travel 4000 mm
            y-travel 2500 mm
            Control S 840 D
            z-travel 1600 mm
            W-axis (spindle longitudinal) 800 mm
            table-size 2500 x 1800 mm
            max. workpiece weight 12000 kg
            tool taper ISO 50
            spindle turning speed range 10- 3000 U/min
            total power requirement 55 kW
            weight of the machine ca. 50 t
            dimensions of the machine ca. 6 x 6 x 4 m
          Datasheet
          Request / Contact
          used  Table Type Boring and Milling Machine UNION BFT 130/5


          • Karl Günter Wirths GmbH
          • Scharpenberger Strasse 96-98
          • 58256 Ennepetal
          • Deutschland

          • 02333-79050
            02333-790555
          • sales@wirths.net
            www.wirths.net
          #1041-70101 · Table Type Boring and Milling Machine

          UNION - BFT 130/5 - - 1980 -

          Technical details
          spindle diameter 130 mm︱cross travel of table 2240 mm︱vertical adjustment of drilling slide 1600 mm︱drilling depth in one stroke 1000 mm︱spindle taper ISO 50 ︱spindle turning speed range 7 - 900 U/min︱table surface area 2000 x 1800 mm︱table travel longitudinal 2500 mm︱table rotating 360 °︱voltage 400 V︱spindle drive 18,5 kW︱feeds longditudinal/cross/vertical 0,63 - 2000 mm/min︱rapid motion -longitudinal/cross/vertical 2 m/min︱weight of the machine ca. 32 t︱table load 8 t︱faceplate turning speed range 4,5 - 180 U/min︱radial slide travel 320 mm︱total connected load 35 kW︱max.drill diameter 800 mm︱ 1400 mm︱
          Machine has digital readout, many accessories and face plate.
            spindle diameter 130 mm
            cross travel of table 2240 mm
            vertical adjustment of drilling . 1600 mm
            drilling depth in one stroke 1000 mm
            spindle taper ISO 50
            spindle turning speed range 7 - 900 U/min
            table surface area 2000 x 1800 mm
            table travel longitudinal 2500 mm
            table rotating 360 °
            voltage 400 V
            spindle drive 18,5 kW
            feeds longditudinal/cross/vertic. 0,63 - 2000 mm/min
            rapid motion -longitudinal/cross. 2 m/min
            weight of the machine ca. 32 t
            table load 8 t
            faceplate turning speed range 4,5 - 180 U/min
            radial slide travel 320 mm
            total connected load 35 kW
            max.drill diameter 800 mm
            1400 mm
            Description :
            Machine has digital readout, many accessories and face plate.
          Datasheet
          Request / Contact

          Bed Type Milling Machine - Universal

          used  Bed Type Milling Machine - Universal FIL FS 130 (CNC)


          • Karl Günter Wirths GmbH
          • Scharpenberger Strasse 96-98
          • 58256 Ennepetal
          • Deutschland

          • 02333-79050
            02333-790555
          • sales@wirths.net
            www.wirths.net
          #1041-11370 · Bed Type Milling Machine - Universal

          FIL - FS 130 (CNC) - - 1995 -

          Technical details
          longitudinal travel 1300 mm︱vertical movement 1000 mm︱cross travel 1000 mm︱table-size 1600 x 570 mm︱max. table load 2 t︱spindle taper ISO 50 ︱spindle drive 12 kW︱speeds 50 - 2000 U/min︱feeds 5- 10000 mm/min︱rapid traverse 10 m/min︱voltage 400 V︱total power requirement 15 kW︱weight of the machine ca. 9 t︱dimensions of the machine ca. 3,1 x 3,4 x 2,9 m︱
          Bed type milling machine with universal milling head. Machine has a Heidenhain TNC 426 control.
            longitudinal travel 1300 mm
            vertical movement 1000 mm
            cross travel 1000 mm
            table-size 1600 x 570 mm
            max. table load 2 t
            spindle taper ISO 50
            spindle drive 12 kW
            speeds 50 - 2000 U/min
            feeds 5- 10000 mm/min
            rapid traverse 10 m/min
            voltage 400 V
            total power requirement 15 kW
            weight of the machine ca. 9 t
            dimensions of the machine ca. 3,1 x 3,4 x 2,9 m
            Description :
            Bed type milling machine with universal milling head.
            Machine has a Heidenhain TNC 426 control.
          Datasheet
          Request / Contact

          Universal Milling Machine

          used  Universal Milling Machine OPTIMUM UF100


          • Karl Günter Wirths GmbH
          • Scharpenberger Strasse 96-98
          • 58256 Ennepetal
          • Deutschland

          • 02333-79050
            02333-790555
          • sales@wirths.net
            www.wirths.net
          #1041-1111177 · Universal Milling Machine

          OPTIMUM - UF100 - - 2009 -

          Technical details
          x-travel 0600 mm︱y-travel 270 mm︱z-travel 430 mm︱table-size 1120 x 260 mm︱spindle turning speed range 40 - 1600 U/min︱spindle taper SK 40 ︱feed in x - axis 50 - 1000 mm/min︱feed range Z-direction 24- 402 mm/min︱rapid traverse x + z axis 1 m/min︱rapid motion - y-axis 1 m/min︱drive capacity - spindle motor 2,2 kW︱total power requirement 3,5 kW︱weight of the machine ca. 1,4 t︱dimensions of the machine ca. 1,7 x 1,4 x 1,75 m︱
          Machine comes with accessories and has a universal milling head.
            x-travel 0600 mm
            y-travel 270 mm
            z-travel 430 mm
            table-size 1120 x 260 mm
            spindle turning speed range 40 - 1600 U/min
            spindle taper SK 40
            feed in x - axis 50 - 1000 mm/min
            feed range Z-direction 24- 402 mm/min
            rapid traverse x + z axis 1 m/min
            rapid motion - y-axis 1 m/min
            drive capacity - spindle motor 2,2 kW
            total power requirement 3,5 kW
            weight of the machine ca. 1,4 t
            dimensions of the machine ca. 1,7 x 1,4 x 1,75 m
            Description :
            Machine comes with accessories and has a universal milling head.
          Datasheet
          Request / Contact
          used  Universal Milling Machine KNUTH UWF 1


          • Karl Günter Wirths GmbH
          • Scharpenberger Strasse 96-98
          • 58256 Ennepetal
          • Deutschland

          • 02333-79050
            02333-790555
          • sales@wirths.net
            www.wirths.net
          #1041-1111178 · Universal Milling Machine

          KNUTH - UWF 1 - - 2006 -

          Technical details
          x-travel 0600 mm︱y-travel 270 mm︱z-travel 430 mm︱table-size 1120 x 260 mm︱spindle turning speed range 40 - 1600 U/min︱spindle taper SK 40 ︱feed in x - axis 50 - 1000 mm/min︱feed range Z-direction 24- 402 mm/min︱rapid traverse x + z axis 1 m/min︱rapid motion - y-axis 1 m/min︱drive capacity - spindle motor 2,2 kW︱total power requirement 3,5 kW︱weight of the machine ca. 1,4 t︱dimensions of the machine ca. 1,7 x 1,4 x 1,75 m︱
          Machine comes with accessories and has a universal milling head. Machine has DRO.
            x-travel 0600 mm
            y-travel 270 mm
            z-travel 430 mm
            table-size 1120 x 260 mm
            spindle turning speed range 40 - 1600 U/min
            spindle taper SK 40
            feed in x - axis 50 - 1000 mm/min
            feed range Z-direction 24- 402 mm/min
            rapid traverse x + z axis 1 m/min
            rapid motion - y-axis 1 m/min
            drive capacity - spindle motor 2,2 kW
            total power requirement 3,5 kW
            weight of the machine ca. 1,4 t
            dimensions of the machine ca. 1,7 x 1,4 x 1,75 m
            Description :
            Machine comes with accessories and has a universal milling head. Machine has
            DRO.
          Datasheet
          Request / Contact
          used  Universal Milling Machine UNION-BIELEFELD KF 5.2 WS


          • Karl Günter Wirths GmbH
          • Scharpenberger Strasse 96-98
          • 58256 Ennepetal
          • Deutschland

          • 02333-79050
            02333-790555
          • sales@wirths.net
            www.wirths.net
          #1041-1111176 · Universal Milling Machine

          UNION-BIELEFELD - KF 5.2 WS - - 1995 - Heidenhain TNC 124

          Technical details
          x-travel 1000 mm︱y-travel 330 mm︱z-travel 320 mm︱table-size 1250 x 380 mm︱spindle turning speed range 40 - 2000 U/min︱spindle taper SK 40 ︱feed in x - axis 50 - 1000 mm/min︱feed range Z-direction 28 - 500 mm/min︱rapid traverse x + z axis 2 m/min︱rapid motion - y-axis 1 m/min︱control Heidenhain TNC 124 ︱drive capacity - spindle motor 7,5 kW︱total power requirement 12 kW︱weight of the machine ca. 3 t︱dimensions of the machine ca. 2,2 x 1,8 x 2,4 m︱
          Machine has a Heidenhain TNC 124 point and path control.
            x-travel 1000 mm
            y-travel 330 mm
            z-travel 320 mm
            table-size 1250 x 380 mm
            spindle turning speed range 40 - 2000 U/min
            spindle taper SK 40
            feed in x - axis 50 - 1000 mm/min
            feed range Z-direction 28 - 500 mm/min
            rapid traverse x + z axis 2 m/min
            rapid motion - y-axis 1 m/min
            control Heidenhain TNC 124
            drive capacity - spindle motor 7,5 kW
            total power requirement 12 kW
            weight of the machine ca. 3 t
            dimensions of the machine ca. 2,2 x 1,8 x 2,4 m
            Description :
            Machine has a Heidenhain TNC 124 point and path control.
          Datasheet
          Request / Contact
          used  Universal Milling Machine MAHO MH 600 P (CNC)


          • Karl Günter Wirths GmbH
          • Scharpenberger Strasse 96-98
          • 58256 Ennepetal
          • Deutschland

          • 02333-79050
            02333-790555
          • sales@wirths.net
            www.wirths.net
          #1041-1111175 · Universal Milling Machine

          MAHO - MH 600 P (CNC) - - 1981 - Heidenhain TNC 121

          Technical details
          x-travel 0500 mm︱y-travel 400 mm︱z-travel 400 mm︱table-size 380 x 680 mm︱spindle turning speed range 40 - 2000 U/min︱rotary table dia. 650 mm︱spindle taper SK 40 ︱feed in x - axis 50 - 750 mm/min︱feed range Z-direction 28 - 500 mm/min︱rapid traverse x + z axis 1,2 m/min︱rapid motion - y-axis 0,8 m/min︱quill stroke 80 mm︱control Heidenhain TNC 121 ︱drive capacity - spindle motor 4 kW︱total power requirement 5,3 kW︱weight of the machine ca. 1,8 t︱dimensions of the machine ca. 1,8 x 1,5 x 1,9 m︱
          Machine has a Heidenhain point to point control.
            x-travel 0500 mm
            y-travel 400 mm
            z-travel 400 mm
            table-size 380 x 680 mm
            spindle turning speed range 40 - 2000 U/min
            rotary table dia. 650 mm
            spindle taper SK 40
            feed in x - axis 50 - 750 mm/min
            feed range Z-direction 28 - 500 mm/min
            rapid traverse x + z axis 1,2 m/min
            rapid motion - y-axis 0,8 m/min
            quill stroke 80 mm
            control Heidenhain TNC 121
            drive capacity - spindle motor 4 kW
            total power requirement 5,3 kW
            weight of the machine ca. 1,8 t
            dimensions of the machine ca. 1,8 x 1,5 x 1,9 m
            Description :
            Machine has a Heidenhain point to point control.
          Datasheet
          Request / Contact
          •   
          •   
          • 1  
          • 2  
          • 3  
          • 4  
          • 5  
          •   
          •   

            Trader Profile:   Karl Günter Wirths GmbH

          Contact Trader



            Karl Günter Wirths GmbH
           Scharpenberger Strasse 96-98
            58256 Ennepetal
            Deutschland
            02333-79050">02333-79050
            02333-790555
            sales@wirths.net
            www.wirths.net

          Profile of Trader

          About us - Wirths GmbH in Ennepetal

          wirths gmbh.Karl G. Wirths founded the company in 1956 as a mechanical workshop. 1961 he developed a die shop for pressing and forming dies. In that time 30 employees were working as die makers in the work shop.
           
          Parallel Karl G. Wirths started a shop for refurbishment of machine tools. That was also the start for the machine tool business.

          The die shop was closed 1972 but the machine tool business was developed.

          In 1972 the first stock was erected. Up to now buildings with up to 50 t crane capacity.

          In that stock we always keep approx. 250 machines.

          We are not focused on a one time business but on a long term business relative with our domestic customers and customers from all places around the world.

          Contact us

          Wirths GmbHKarl Günter Wirths GmbH
          Scharpenberger Str. 96-98
          D-58256 Ennepetal / Germany




          Karl Günter Wirths GmbH   58256 Ennepetal Scharpenberger Strasse 96-98 Deutschland
          Karl Günter Wirths GmbH

          Scharpenberger Strasse 96-98



          Contact Trader


            Karl Günter Wirths GmbH
           Scharpenberger Strasse 96-98
            58256 Ennepetal
            Deutschland
            02333-79050
            02333-790555
            sales@wirths.net
            www.wirths.net
            Contact person:

           
          ACHTUNG: NEUE FAX Nr. 02333 790555




          Machine category


          Abkantpresse - hydraulisch · Anreißplatte · Aufspannplatte · Auswuchtmaschine · Bandschleifmaschine · Bandsäge - horizontal · Bandsäge - Vertikal · Bearbeitungszentrum 5 Achs · Bearbeitungszentrum - Universal · Bearbeitungszentrum - Vertikal · Bettfräsmaschine - Universal · Bohrwerkstisch · Bügelsäge · Bügelsäge - Automatisch · CNC Dreh- und Fräszentrum · CNC Drehmaschine · Doppelständerpresse - Hydraulisch · Doppelständerziehpresse - Hydraulisch · Drahterodiermaschine · Drehmaschine - zyklengesteuert · Dreiwalzen - Blechbiegemaschine · Einständerexzenterpresse · Einständerpresse - Hydraulisch · Endenbearbeitungsmaschine · Flachschleifmaschine - Horizontal · Fräsmaschine - Universal · Gabelstapler · Handhebel-Schere · Innenschleifmaschine · Karusselldrehmaschine - Einständer · Kreissäge - Automatisch · Messmaschine · Nuten-Stossmaschine · Plan- und Spitzendrehbank · Plattenfeld · Pneumatische Presse · Querteilanlage · Richtmaschine · Richtplatte · Richtpresse - Einständer · Rohrbiegemaschine · Rundschleifmaschine · Rundtisch-Bohrungs-Schleifmaschine · Schaufelbagger · Schleifbock · Schnellradialbohrmaschine · Senkerodiermaschine · Spitzendrehmaschine · Stangenzuführung · Stanzautomat-Doppelständer · Säulenbohrmaschine · Tafelschere - hydraulisch · Tischbohrwerk · Werkstattpresse - hydraulisch · Zahnrad-Abwälzfräsmaschine - vertikal ·