European network of stockholding machinery dealers

Category:
    Manufacturer:
      Machines:
        Trader:

          Isabelle Knops Vermittlung & Handel von WZM - Stockist for used machines

          Machinelist:


          CNC Lathe

          used  CNC Lathe GEMINIS GORATU GT7 G2 1800 x 4000


          • Isabelle Knops
          • Opladener Str. 126
          • 40789 Monheim am Rhein
          • Deutschland

          • +49 (0)2173-4999611
            +49 (0)2173-8546560
          • isabelle.knops@isabelleknops.com
            www.isabelleknops.com
          #2013-E0357 · CNC Lathe

          GEMINIS GORATU - GT7 G2 1800 x 4000 - - 2018 - SIEMENS 840D SL

          Technical details
          turning diameter 1.800 mm︱turning length 4.000 mm︱control SIEMENS 840D SL ︱total power requirement 74 kW︱weight of the machine ca. 24 t︱dimensions of the machine ca. m︱
          CNC Lathe - horizontal / Brand: GEMINIS GORATU / Type: GT7 G2 / Year of construction: 2018 The machine can be inspected by appointment in operation. Very good used, operational condition ! Operating hours (18.11.2021): - Switch-on hours: 8.500 h - Spindle hours: 2.600 h TECHNICAL DATA: - Centre height: 910 mm - Diameter max.: above the cross slide: 1.400 mm above the machine base: 1.800 mm Center distance: 4.000 mm COMPREHENSIVE EQUIPMENT There is no guarantee for correctness and completeness of the technical details and accessories. Detailed technical data sheet and information on equipment available on request.
            turning diameter 1.800 mm
            turning length 4.000 mm
            control SIEMENS 840D SL
            total power requirement 74 kW
            weight of the machine ca. 24 t
            Description :
            CNC Lathe - horizontal / Brand: GEMINIS GORATU / Type: GT7 G2 /
            Year of construction: 2018

            The machine can be inspected by appointment in operation.

            Very good used, operational condition !

            Operating hours (18.11.2021):
            - Switch-on hours: 8.500 h
            - Spindle hours: 2.600 h

            TECHNICAL DATA:
            - Centre height: 910 mm

            - Diameter max.:
            above the cross slide: 1.400 mm
            above the machine base: 1.800 mm
            Center distance: 4.000 mm


            COMPREHENSIVE EQUIPMENT

            There is no guarantee for correctness and completeness of the technical details
            and accessories.

            Detailed technical data sheet and information on equipment available on request.
          Datasheet
          Request / Contact
          used  CNC Lathe GEMINIS GHT9 G


          • Isabelle Knops
          • Opladener Str. 126
          • 40789 Monheim am Rhein
          • Deutschland

          • +49 (0)2173-4999611
            +49 (0)2173-8546560
          • isabelle.knops@isabelleknops.com
            www.isabelleknops.com
          #2013-E0360 · CNC Lathe

          GEMINIS - GHT9 G - - 2011 - Sinumerik 840D

          Technical details
          turning diameter 1.600 mm︱turning length 6.000 mm︱control Sinumerik 840D ︱total power requirement 100 kW︱weight of the machine ca. 25 t︱dimensions of the machine ca. m︱
          CNC Lathe - Horizontal / Brand: GEMINIS / Type: GHT9 G-1600x6000 / Year of construction: 2011 - Start-up: 01.11.2011 The machine can be inspected by appointment under power. Very good used condition, ready for immediate use ! TECHNICAL DATA: - Control: Siemens 810 D - Ø Chuck: 1.400 mm - Ø Turning via slide: 1.100 mm - Ø Turning max.: 1.635 mm - Turning length: 6.000 mm - Total power requirement: 82 kW EQUIPMENT: -1 x Steady rest Ø: 100 – 500 mm - 1 x Steady rest Ø: 500 – 900 mm - Tailstock - Various other accessories - Documentation - CE marking There is no guarantee for correctness and completeness of the technical details and accessories. Detailed technical data sheet and information on equipment available on request.
            turning diameter 1.600 mm
            turning length 6.000 mm
            control Sinumerik 840D
            total power requirement 100 kW
            weight of the machine ca. 25 t
            Description :
            CNC Lathe - Horizontal / Brand: GEMINIS / Type: GHT9 G-1600x6000 /
            Year of construction: 2011 - Start-up: 01.11.2011

            The machine can be inspected by appointment under power.

            Very good used condition, ready for immediate use !

            TECHNICAL DATA:
            - Control: Siemens 810 D

            - Ø Chuck: 1.400 mm
            - Ø Turning via slide: 1.100 mm
            - Ø Turning max.: 1.635 mm
            - Turning length: 6.000 mm

            - Total power requirement: 82 kW

            EQUIPMENT:
            -1 x Steady rest Ø: 100 – 500 mm
            - 1 x Steady rest Ø: 500 – 900 mm
            - Tailstock
            - Various other accessories
            - Documentation
            - CE marking

            There is no guarantee for correctness and completeness of the technical details
            and accessories.

            Detailed technical data sheet and information on equipment available
            on request.
          Datasheet
          Request / Contact

          Lathe - cycle-controlled

          used  Lathe -  cycle-controlled PBR T 35 SNC x 2000


          • Isabelle Knops
          • Opladener Str. 126
          • 40789 Monheim am Rhein
          • Deutschland

          • +49 (0)2173-4999611
            +49 (0)2173-8546560
          • isabelle.knops@isabelleknops.com
            www.isabelleknops.com
          #2013-E0344 · Lathe - cycle-controlled

          PBR - T 35 SNC x 2000 - - 2007 - FAGOR

          Technical details
          turning diameter 720 mm︱turning length 2.000 mm︱control FAGOR ︱total power requirement 55 kW︱weight of the machine ca. 5,8 t︱
          Lathe - cycle controled / Brand: PBR - Perico Baroni Raimondi / Type: T 35 SNC x 2000 / Year of construction: 2007 The machine can be inspected by appointment under working condition. Very well maintained, ready to use condition. 1 x weekly cleaning of the machine, continuous supervision of the machine's condition of the machine by its own maintenance, 1 x annual maintenance by the by the manufacturer's service staff. - Guideways are in very good condition - Less than 1-shift operation. TECHNICAL DATA: - Control: FAGOR Working area: - Swing diameter over bed: 720 mm - Swing diameter over cross slide: 425 mm - Turning length: 2.000 mm - Speed range: 2.000 rpm - Gear steps: 2 - Max. Workpiece weight between centres and steady rests: 4 tons - Max. Workpiece weight between centres: 3 tons - Max. Workpiece weight flying: 1,2 tons - Total power requirement: 55 kW - Machine weight approx.: 5,8 tons EQUIPMENT: - Chip conveyor - Power chuck Ø: 400 mm - Steady rest manual Ø: 20 - 200 mm - 2 pieces of MULTIFIX Quick-change steel holder - Various jaws - Documentation - CE marking Without guarantee for completeness and correctness of the technical information and the equipment.
            turning diameter 720 mm
            turning length 2.000 mm
            control FAGOR
            total power requirement 55 kW
            weight of the machine ca. 5,8 t
            Description :
            Lathe - cycle controled / Brand: PBR - Perico Baroni Raimondi /
            Type: T 35 SNC x 2000 / Year of construction: 2007

            The machine can be inspected by appointment under working condition.

            Very well maintained, ready to use condition.
            1 x weekly cleaning of the machine, continuous supervision of the machine's
            condition of the machine by its own maintenance, 1 x annual maintenance by the
            by the manufacturer's service staff.
            - Guideways are in very good condition -

            Less than 1-shift operation.

            TECHNICAL DATA:
            - Control: FAGOR

            Working area:
            - Swing diameter over bed: 720 mm
            - Swing diameter over cross slide: 425 mm
            - Turning length: 2.000 mm

            - Speed range: 2.000 rpm
            - Gear steps: 2

            - Max. Workpiece weight between centres and steady rests: 4 tons
            - Max. Workpiece weight between centres: 3 tons
            - Max. Workpiece weight flying: 1,2 tons

            - Total power requirement: 55 kW
            - Machine weight approx.: 5,8 tons

            EQUIPMENT:
            - Chip conveyor
            - Power chuck Ø: 400 mm
            - Steady rest manual Ø: 20 - 200 mm
            - 2 pieces of MULTIFIX Quick-change steel holder
            - Various jaws
            - Documentation
            - CE marking

            Without guarantee for completeness and correctness of the technical information
            and the equipment.
          Datasheet
          Request / Contact
          used  Lathe -  cycle-controlled PBR T 450 SNC x 3500


          • Isabelle Knops
          • Opladener Str. 126
          • 40789 Monheim am Rhein
          • Deutschland

          • +49 (0)2173-4999611
            +49 (0)2173-8546560
          • isabelle.knops@isabelleknops.com
            www.isabelleknops.com
          #2013-E0343 · Lathe - cycle-controlled

          PBR - T 450 SNC x 3500 - - 2005 - FAGOR

          Technical details
          turning diameter 920 mm︱turning length 3.500 mm︱control FAGOR ︱total power requirement 60 kW︱weight of the machine ca. 8,1 t︱
          Lathe - cycle controled / Brand: PBR - Perico Baroni Raimondi / Type: T 450 SNC x 3500 / Year of construction: 2005 The machine can be inspected by appointment under working condition. Very well maintained, ready to use condition. 1 x weekly cleaning of the machine, continuous supervision of the machine's condition of the machine by its own maintenance, 1 x annual maintenance by the by the manufacturer's service staff. - Guideways are in very good condition - 2-shift operation, since mid-2020 1-shift operation. TECHNICAL DATA: - Control: FAGOR Working area: - Swing diameter over bed: 920 mm - Swing diameter over cross slide: 550 mm - Turning length: 3.500 mm - Speed range: 1.17 rpm - Gear steps: 2 - Max. Workpiece weight between centres and steady rests: 5 tons - Max. Workpiece weight between centres: 4 tons - Max. Workpiece weight flying: 1,2 tons - Total power requirement: 60 kW EQUIPMENT: - Chip conveyor - Power chuck Ø: 630 mm - 1 piece hydraulic steady rest Ø: 35 - 245 mm - 2 pieces of MULTIFIX Quick-change steel holder - Various jaws - Documentation - CE marking Without guarantee for completeness and correctness of the technical information and the equipment.
            turning diameter 920 mm
            turning length 3.500 mm
            control FAGOR
            total power requirement 60 kW
            weight of the machine ca. 8,1 t
            Description :
            Lathe - cycle controled / Brand: PBR - Perico Baroni Raimondi /
            Type: T 450 SNC x 3500 / Year of construction: 2005

            The machine can be inspected by appointment under working condition.

            Very well maintained, ready to use condition.
            1 x weekly cleaning of the machine, continuous supervision of the machine's
            condition of the machine by its own maintenance, 1 x annual maintenance by the
            by the manufacturer's service staff.
            - Guideways are in very good condition -

            2-shift operation, since mid-2020 1-shift operation.

            TECHNICAL DATA:
            - Control: FAGOR

            Working area:
            - Swing diameter over bed: 920 mm
            - Swing diameter over cross slide: 550 mm
            - Turning length: 3.500 mm

            - Speed range: 1.17 rpm
            - Gear steps: 2

            - Max. Workpiece weight between centres and steady rests: 5 tons
            - Max. Workpiece weight between centres: 4 tons
            - Max. Workpiece weight flying: 1,2 tons

            - Total power requirement: 60 kW

            EQUIPMENT:
            - Chip conveyor
            - Power chuck Ø: 630 mm
            - 1 piece hydraulic steady rest Ø: 35 - 245 mm
            - 2 pieces of MULTIFIX Quick-change steel holder
            - Various jaws
            - Documentation
            - CE marking

            Without guarantee for completeness and correctness of the technical information
            and the equipment.
          Datasheet
          Request / Contact

          lathe-conventional-electronic

          used  lathe-conventional-electronic GEMINIS GE 1800


          • Isabelle Knops
          • Opladener Str. 126
          • 40789 Monheim am Rhein
          • Deutschland

          • +49 (0)2173-4999611
            +49 (0)2173-8546560
          • isabelle.knops@isabelleknops.com
            www.isabelleknops.com
          #2013-E0362 · lathe-conventional-electronic

          GEMINIS - GE 1800 - - -

          Technical details
          turning diameter max. 1.100 mm︱turning length 4.000 mm︱swing diameter over bed slide 800 mm︱workpiece weight 3,5 t︱total power requirement 30 kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱
          Lathe - conventional / Brand: GEMINIS / Type: GE 1800 Year of construction: 1981 The machine can be inspected by appointment in the factory. Condition: Ready for operation. TECHNICAL DATA: - Turning diameter max.: 1.100 mm - Swing diameter over bed slide: 800 mm - Turning length: 4.000 mm - Speed: 0 - 350 rpm - Drive power: 30 kW EQUIPMENT: - 1 piece of steady rest: 100 - 535 mm - 1 piece of steady rest: 500 - 800 mm - Tailstock There is no guarantee for correctness and completeness of the technical details and accessories.
            turning diameter max. 1.100 mm
            turning length 4.000 mm
            swing diameter over bed slide 800 mm
            workpiece weight 3,5 t
            total power requirement 30 kW
            Description :
            Lathe - conventional / Brand: GEMINIS / Type: GE 1800
            Year of construction: 1981

            The machine can be inspected by appointment in the factory.

            Condition: Ready for operation.

            TECHNICAL DATA:
            - Turning diameter max.: 1.100 mm
            - Swing diameter over bed slide: 800 mm
            - Turning length: 4.000 mm

            - Speed: 0 - 350 rpm

            - Drive power: 30 kW

            EQUIPMENT:
            - 1 piece of steady rest: 100 - 535 mm
            - 1 piece of steady rest: 500 - 800 mm
            - Tailstock

            There is no guarantee for correctness and completeness of the technical details
            and accessories.
          Datasheet
          Request / Contact

          Vertical Turret Lathe - Double Column

          used  Vertical Turret Lathe - Double Column NILES DKZ 6300 x 3500


          • Isabelle Knops
          • Opladener Str. 126
          • 40789 Monheim am Rhein
          • Deutschland

          • +49 (0)2173-4999611
            +49 (0)2173-8546560
          • isabelle.knops@isabelleknops.com
            www.isabelleknops.com
          #2013-E0365 · Vertical Turret Lathe - Double Column

          NILES - DKZ 6300 x 3500 - - -

          Technical details
          faceplate diameter 5.000 mm︱swing diameter 6.300 mm︱turning height 3.500 mm︱total power requirement 151 kW︱weight of the machine ca. 183 t︱dimensions of the machine ca. m︱
          Vertical Turret Lathe - Double Column / Brand: WMW-NILES / Type: DKZ 6300 x 3500 / Year of construction approx.: 1986 The machine can be inspected by appointment in the factory. MAIN TECHNICAL DATA: * Control: conventional * Faceplate diameter: 5.000 mm * Swing diameter: 6.300 mm * Turning height: 3.500 mm * Tabled load approx.: 50 tons * 2 Columns, travel: 1.800 mm * Connected load: 151 kW * Frequency: 50 Hz * Operating voltage: 380 V * Control voltage: 220 V * Machine weight approx.: 183 tons EQUIPMENT: * Chip conveyor There is no guarantee for correctness and completeness of the technical details and and accessories.
            faceplate diameter 5.000 mm
            swing diameter 6.300 mm
            turning height 3.500 mm
            total power requirement 151 kW
            weight of the machine ca. 183 t
            Description :
            Vertical Turret Lathe - Double Column / Brand: WMW-NILES /
            Type: DKZ 6300 x 3500 / Year of construction approx.: 1986

            The machine can be inspected by appointment in the factory.

            MAIN TECHNICAL DATA:
            * Control: conventional

            * Faceplate diameter: 5.000 mm
            * Swing diameter: 6.300 mm
            * Turning height: 3.500 mm
            * Tabled load approx.: 50 tons

            * 2 Columns, travel: 1.800 mm

            * Connected load: 151 kW
            * Frequency: 50 Hz
            * Operating voltage: 380 V
            * Control voltage: 220 V

            * Machine weight approx.: 183 tons

            EQUIPMENT:
            * Chip conveyor


            There is no guarantee for correctness and completeness of the technical details
            and and accessories.
          Datasheet
          Request / Contact
          used  Vertical Turret Lathe - Double Column NILES DKZ 6300x3500


          • Isabelle Knops
          • Opladener Str. 126
          • 40789 Monheim am Rhein
          • Deutschland

          • +49 (0)2173-4999611
            +49 (0)2173-8546560
          • isabelle.knops@isabelleknops.com
            www.isabelleknops.com
          #2013-E0226 · Vertical Turret Lathe - Double Column

          NILES - DKZ 6300x3500 - - -

          Technical details
          faceplate diameter 5.000 mm︱swing diameter 6.300 mm︱turning height 3.500 mm︱total power requirement 145 kW︱weight of the machine ca. 183 t︱
          Vertical Turret Lathe - Double Column - Brand: WMW-NILES - Type: DKZ 6300x3500 - Year of construction: 1986 The machine can be inspected by appointment in the factory. MAIN TECHNICAL DATA: * Control: conventionel * Faceplate diameter: 5.000 mm * Swing diameter: 6.300 mm (low workpieces: 6.500 mm) * Turning height: 3.500 mm * Table load max.: 50 t * 2 ram, travel: 1.800 mm * Connected load: 145 kW * Machine weight: approx. 183 t There is no guarantee for correctness and completeness of the technical details and and accessories.
            faceplate diameter 5.000 mm
            swing diameter 6.300 mm
            turning height 3.500 mm
            total power requirement 145 kW
            weight of the machine ca. 183 t
            Description :
            Vertical Turret Lathe - Double Column - Brand: WMW-NILES -
            Type: DKZ 6300x3500 - Year of construction: 1986

            The machine can be inspected by appointment in the factory.

            MAIN TECHNICAL DATA:
            * Control: conventionel

            * Faceplate diameter: 5.000 mm
            * Swing diameter: 6.300 mm (low workpieces: 6.500 mm)
            * Turning height: 3.500 mm
            * Table load max.: 50 t

            * 2 ram, travel: 1.800 mm

            * Connected load: 145 kW
            * Machine weight: approx. 183 t


            There is no guarantee for correctness and completeness of the technical details
            and and accessories.
          Datasheet
          Request / Contact

          Vertical Turret Lathe - Single Column

          used  Vertical Turret Lathe - Single Column CKD-BLANSKO SKJ 50-100


          • Isabelle Knops
          • Opladener Str. 126
          • 40789 Monheim am Rhein
          • Deutschland

          • +49 (0)2173-4999611
            +49 (0)2173-8546560
          • isabelle.knops@isabelleknops.com
            www.isabelleknops.com
          #2013-E0203 · Vertical Turret Lathe - Single Column

          CKD-BLANSKO - SKJ 50-100 - - 1993/2006 - Siemens 840D

          Technical details
          faceplate diameter 4.770 mm︱swing diameter 10.000 mm︱turning height 4300 mm︱Control Siemens 840D ︱workpiece weight max. 100 t︱dimensions 15910 x 10600 x 9280 mm︱total power requirement kW︱weight of the machine ca. 121 t︱
          Vertical Turret Lathe - Single Column (vertical boring- and milling machine) CKD-BLANSKO / SKJ 50-100 Year of construction: 1993 / commissioning: 1994 Retrofit in 2006: - CNC control Siemens 840D - Revision of the geometry - C-axis: Conversion to use with drilling and milling tools. - New dives - Completely new electrical (cabinet) etc. - New central lubrication - CAPTO tool holders / taper The machine can be inspected by appointment in dismantled / stored condition. It was used in2-shift operation. TECNICAL DESCRIPTION: - CNC control: Siemens Sinumerik 840D Machine: - Machining diameter: 10.000 mm - Processing height: 4.240 mm Support/RAM: - Motor power: 22 kW - Level II: max. 750 rpm - Torque: 1.000 Nm - RAM valve diameter: 250 mm - Dive diameter: 380 mm - RAM travel: 2.000 mm Rotary table: - Faceplate diameter: 4.700 mm - Workpiece weight max.: 100 t - Power: 100 kW Rotary operation: Speed: 40 rpm Level I max.: 11 rpm Level II max.: 40 rpm Torque: 273.000 Nm Milling operation: Speed: 10 (positioning axis) Travels: Crossbeam support Side support - X Travel: 3.375 mm 1.600 mm Feed: 4.600 mm/min 4.600 mm/min Feed force: 72.000 N 72.000 N - Z Travel: 2.000 mm 2.600 mm Feed: 4.600 mm/min 4.600 mm/min Feed force: 72.000 N 72.000 N +/- 30° +/- 15° RAM tilt - Crossbeam Travel: 3.350 mm Feed: 500 mm/min Machine dimensions: - Length: 15.910 mm - Width: 10.600 mm - Height over floor: 9.280 mm - Total height: 11.600 mm Machine weight: approx. 121 t - Chips handling: Circular conveyor Vertical unit: - Power: 22 kW - Torque: 1.000 Nm - Speed: 1.000 rpm Horizontal unit: - Power: 11 kW - Torque: 145 Nm - Speed: 2.000 rpm - Jaw boxes: 4 pieces Dokumentation complete available.
            faceplate diameter 4.770 mm
            swing diameter 10.000 mm
            turning height 4300 mm
            Control Siemens 840D
            workpiece weight max. 100 t
            dimensions 15910 x 10600 x 9280 mm
            weight of the machine ca. 121 t
            Description :
            Vertical Turret Lathe - Single Column (vertical boring- and milling machine)
            CKD-BLANSKO / SKJ 50-100

            Year of construction: 1993 / commissioning: 1994

            Retrofit in 2006:
            - CNC control Siemens 840D
            - Revision of the geometry
            - C-axis: Conversion to use with drilling and milling tools.
            - New dives
            - Completely new electrical (cabinet) etc.
            - New central lubrication
            - CAPTO tool holders / taper

            The machine can be inspected by appointment in dismantled / stored condition.

            It was used in2-shift operation.

            TECNICAL DESCRIPTION:
            - CNC control: Siemens Sinumerik 840D

            Machine:
            - Machining diameter: 10.000 mm
            - Processing height: 4.240 mm

            Support/RAM:
            - Motor power: 22 kW
            - Level II: max. 750 rpm
            - Torque: 1.000 Nm

            - RAM valve diameter: 250 mm
            - Dive diameter: 380 mm
            - RAM travel: 2.000 mm

            Rotary table:
            - Faceplate diameter: 4.700 mm
            - Workpiece weight max.: 100 t
            - Power: 100 kW
            Rotary operation:
            Speed: 40 rpm
            Level I max.: 11 rpm
            Level II max.: 40 rpm
            Torque: 273.000 Nm

            Milling operation:
            Speed: 10 (positioning axis)

            Travels:
            Crossbeam support Side support
            - X Travel: 3.375 mm 1.600 mm
            Feed: 4.600 mm/min 4.600 mm/min
            Feed force: 72.000 N 72.000 N

            - Z Travel: 2.000 mm 2.600 mm
            Feed: 4.600 mm/min 4.600 mm/min
            Feed force: 72.000 N 72.000 N
            +/- 30° +/- 15° RAM tilt

            - Crossbeam Travel: 3.350 mm
            Feed: 500 mm/min

            Machine dimensions:
            - Length: 15.910 mm
            - Width: 10.600 mm
            - Height over floor: 9.280 mm
            - Total height: 11.600 mm

            Machine weight: approx. 121 t

            - Chips handling: Circular conveyor

            Vertical unit:
            - Power: 22 kW
            - Torque: 1.000 Nm
            - Speed: 1.000 rpm

            Horizontal unit:
            - Power: 11 kW
            - Torque: 145 Nm
            - Speed: 2.000 rpm

            - Jaw boxes: 4 pieces

            Dokumentation complete available.



          Datasheet
          Request / Contact

          Floor Type Boring and Milling M/C - Hor.

          used  Floor Type Boring and Milling M/C - Hor. UNION KR150


          • Isabelle Knops
          • Opladener Str. 126
          • 40789 Monheim am Rhein
          • Deutschland

          • +49 (0)2173-4999611
            +49 (0)2173-8546560
          • isabelle.knops@isabelleknops.com
            www.isabelleknops.com
          #2013-E0361 · Floor Type Boring and Milling M/C - Hor.

          UNION - KR150 - - 2014 - Heidenhain iTNC 530

          Technical details
          spindle diameter 150 mm︱x-travel 3.200 mm︱y-travel 2.500 mm︱bore capacity in steel (diameter) mm︱control Heidenhain iTNC 530 ︱total power requirement 120 kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱
          Horizontal boring and milling machine in cross bed design Brand: UNION / Type: KR150 / Year of construction: 2014 The machine can be inspected by appointment in the factory under power. Good working used condition, ready for use. Operating hours (12th January 2022): Machine ON: 29.285 h Program run: 9.554 h TECHNICAL DATA: Working area: Travels: - X-axis (Cross slide): 3.200 mm - Y-axis (Headstock): 2.500 mm - Z-axis (Support beam): 1.000 mm - V-axis (Column slide, integrated in the control system): 1.500 mm - W-axis (Spindle): 700 mm - B-axis (Rotary table): 360° The RAM is hydraulically balanced / compensated via the control system. Rotary table dimensions: - Clamping area: 1.800 x 2.000 mm - Max. workpiece weight with centric clamping: 25 tons SPINDLE: - Diameter: 150 mm EQUIPMENT: - Universal milling head UC-U40 Milling spindle: - Speed max.: 3.000 rpm - Tool holder: SK50 ADDITIONAL EQUIPMENT: - Cooling lubricant - Belt filter system - External cooling lubricant supply - Internal cooling lubricant supply - Workpiece measurement probe There is no guarantee for correctness and completeness of the technical details and accessories. Detailed technical data sheet and information on equipment available on request.
            spindle diameter 150 mm
            x-travel 3.200 mm
            y-travel 2.500 mm
            control Heidenhain iTNC 530
            total power requirement 120 kW
            Description :
            Horizontal boring and milling machine in cross bed design
            Brand: UNION / Type: KR150 / Year of construction: 2014

            The machine can be inspected by appointment in the factory under power.

            Good working used condition, ready for use.

            Operating hours (12th January 2022):
            Machine ON: 29.285 h
            Program run: 9.554 h

            TECHNICAL DATA:
            Working area:
            Travels:
            - X-axis (Cross slide): 3.200 mm
            - Y-axis (Headstock): 2.500 mm
            - Z-axis (Support beam): 1.000 mm
            - V-axis (Column slide, integrated in the control system): 1.500 mm
            - W-axis (Spindle): 700 mm
            - B-axis (Rotary table): 360°

            The RAM is hydraulically balanced / compensated via the control system.

            Rotary table dimensions:
            - Clamping area: 1.800 x 2.000 mm
            - Max. workpiece weight with centric clamping: 25 tons

            SPINDLE:
            - Diameter: 150 mm

            EQUIPMENT:
            - Universal milling head UC-U40

            Milling spindle:
            - Speed max.: 3.000 rpm
            - Tool holder: SK50


            ADDITIONAL EQUIPMENT:
            - Cooling lubricant
            - Belt filter system
            - External cooling lubricant supply
            - Internal cooling lubricant supply
            - Workpiece measurement probe


            There is no guarantee for correctness and completeness of the technical details
            and accessories.

            Detailed technical data sheet and information on equipment available on request.
          Datasheet
          Request / Contact

          Jig Boring Machine

          used  Jig Boring Machine MIKROMAT BKoZ 900x1400


          • Isabelle Knops
          • Opladener Str. 126
          • 40789 Monheim am Rhein
          • Deutschland

          • +49 (0)2173-4999611
            +49 (0)2173-8546560
          • isabelle.knops@isabelleknops.com
            www.isabelleknops.com
          #2013-E0320 · Jig Boring Machine

          MIKROMAT - BKoZ 900x1400 - - - Numerik CNC-H 646

          Technical details
          spindle diameter 125 mm︱x-travel 1.120 mm︱y-travel 710 mm︱Control Numerik CNC-H 646 ︱total power requirement ca. 35 kW︱weight of the machine ca. 9,8 t︱dimensions of the machine ca. 4,06 x 3,0 x 2,7 m︱
          Double Column-Jig Boring Machine / Brand: VEB MIKROMAT / Type: BKoZ 900x1400 / Year of construction: 1986 The machine can be inspected by appointment in the factory under power. Condition: Well used / ready for operation. The machine still achieves a high precision / in the µm range. (according to information from the owner). TECHNICAL SPECIFICATIONS: - CNC path control: Numerik CNC-H 646 Working area: - X-axis (Longitudinal adjustment of the table): 1.120 mm - Y-axis (Cross adjustment of the headstock): 710 mm - W-axis (Height adjustment of the cross beam): 630 mm - Z-axis (Stroke of the drilling spindle): 315 mm Clamping table: - Clamping surface: 1.400 x 900 mm - Usable clamping surface: 1,26 m² - Number of T-Slots: 9 pieces - T-Slots width: 18 H7 mm - Distance of the T-Slots: 100 +/- 0,1 mm - Table load max.: 2,4 tons - Table height over floor: 865 mm Drilling spindle: - Spindle diameter: 125 mm - Spindle holder: SK 45 - Speeds: 20 - Speed range, 2 level: Speed range 1 (with constant torque) 0,29 - 4,6 kW: 36 - 180 rpm Speed range 2 (with decreasing torque) 4,6 kW: 180 - 2.240 rpm - Torque of the drilling spindle: Speed range 1 (with constant torque) 250 Nm: 36 - 180 rpm Speed range 2 (with decreasing torque) 250 - 20 Nm: 180 - 2.240 rpm Axial force of the drill spindle: - Speed range 1 (constant force): 10.000 N - Speed range 2 (decreasing force): 10.000 N - 4.500 N Adjustment speeds: - Rapid traverse X,Y: max. 10 m/min - Rapid traverse Z: max. 6 m/min - Feed rate X, Y, Z: 1 - 2.000 mm/min Motors: Drilling spindle drive motor: - Nominal power: 5,5 kW - Rated voltage: 380 V - Rated speed: 2.880 rpm - Weight: approx. 37 kg Drive motor Z-axis: - Rated voltage: 52 V - Rated continuous torque: 7,7 Nm - Rated speed: 1.200 rpm - Maximum speed: 4.500 rpm - Weight: approx. 26 kg Drive motor X-, Y-axis: - Rated voltage: 40 V - Rated continuous torque: 14,3 Nm - Rated speed: 500 rpm - Maximum speed: 2.000 rpm - Weight: approx. 39 kg Drive motor W-axis: - Nominal power: 2,2 kW - Rated voltage: 380 V - Rated speed: 1.420 rpm - Weight: approx. 22 kg Drive motor Hydraulic unit: - Nominal power: 1,1 kW - Rated voltage: 220/380 V - Rated speed: 950 rpm - Type: M 301 Drive motor Lubrication pump: - Nominal power: 0,06 kW - Rated voltage: 220/380 V - Rated speed: 1.400 rpm - Weight: approx. 2,6 kg - Type: M 361 Drive motor Switching assistance: - Nominal power: 0,18 kW - Rated voltage: 380 V - Rated speed: 1.400 rpm - Weight: approx. 5 kg Liquid container: - Filling volume: 63 l - Max. Filling volume: 75 l - Max. Removable fluid volume: 30 l - Weight (empty): 60 kg Pump unit: - Weight: 1,4 kg Machine weight: approx. 9,8 tons Space requirement approx.: 4,06 x 3,0 x 2,7 m EQUIPMENT: - Coolant system, hydraulic unit - Various tools - Documentation There is no guarantee for correctness and completeness of the technical details and accessories.
            spindle diameter 125 mm
            x-travel 1.120 mm
            y-travel 710 mm
            Control Numerik CNC-H 646
            total power requirement ca. 35 kW
            weight of the machine ca. 9,8 t
            dimensions of the machine ca. 4,06 x 3,0 x 2,7 m
            Description :
            Double Column-Jig Boring Machine / Brand: VEB MIKROMAT /
            Type: BKoZ 900x1400 / Year of construction: 1986

            The machine can be inspected by appointment in the factory under power.

            Condition: Well used / ready for operation.
            The machine still achieves a high precision / in the µm range.
            (according to information from the owner).


            TECHNICAL SPECIFICATIONS:
            - CNC path control: Numerik CNC-H 646

            Working area:
            - X-axis (Longitudinal adjustment of the table): 1.120 mm
            - Y-axis (Cross adjustment of the headstock): 710 mm
            - W-axis (Height adjustment of the cross beam): 630 mm
            - Z-axis (Stroke of the drilling spindle): 315 mm

            Clamping table:
            - Clamping surface: 1.400 x 900 mm
            - Usable clamping surface: 1,26 m²
            - Number of T-Slots: 9 pieces
            - T-Slots width: 18 H7 mm
            - Distance of the T-Slots: 100 +/- 0,1 mm
            - Table load max.: 2,4 tons
            - Table height over floor: 865 mm

            Drilling spindle:
            - Spindle diameter: 125 mm
            - Spindle holder: SK 45
            - Speeds: 20
            - Speed range, 2 level:
            Speed range 1 (with constant torque) 0,29 - 4,6 kW: 36 - 180 rpm
            Speed range 2 (with decreasing torque) 4,6 kW: 180 - 2.240 rpm
            - Torque of the drilling spindle:
            Speed range 1 (with constant torque) 250 Nm: 36 - 180 rpm
            Speed range 2 (with decreasing torque) 250 - 20 Nm: 180 - 2.240 rpm

            Axial force of the drill spindle:
            - Speed range 1 (constant force): 10.000 N
            - Speed range 2 (decreasing force): 10.000 N - 4.500 N

            Adjustment speeds:
            - Rapid traverse X,Y: max. 10 m/min
            - Rapid traverse Z: max. 6 m/min
            - Feed rate X, Y, Z: 1 - 2.000 mm/min

            Motors:
            Drilling spindle drive motor:
            - Nominal power: 5,5 kW
            - Rated voltage: 380 V
            - Rated speed: 2.880 rpm
            - Weight: approx. 37 kg
            Drive motor Z-axis:
            - Rated voltage: 52 V
            - Rated continuous torque: 7,7 Nm
            - Rated speed: 1.200 rpm
            - Maximum speed: 4.500 rpm
            - Weight: approx. 26 kg
            Drive motor X-, Y-axis:
            - Rated voltage: 40 V
            - Rated continuous torque: 14,3 Nm
            - Rated speed: 500 rpm
            - Maximum speed: 2.000 rpm
            - Weight: approx. 39 kg
            Drive motor W-axis:
            - Nominal power: 2,2 kW
            - Rated voltage: 380 V
            - Rated speed: 1.420 rpm
            - Weight: approx. 22 kg
            Drive motor Hydraulic unit:
            - Nominal power: 1,1 kW
            - Rated voltage: 220/380 V
            - Rated speed: 950 rpm
            - Type: M 301
            Drive motor Lubrication pump:
            - Nominal power: 0,06 kW
            - Rated voltage: 220/380 V
            - Rated speed: 1.400 rpm
            - Weight: approx. 2,6 kg
            - Type: M 361
            Drive motor Switching assistance:
            - Nominal power: 0,18 kW
            - Rated voltage: 380 V
            - Rated speed: 1.400 rpm
            - Weight: approx. 5 kg

            Liquid container:
            - Filling volume: 63 l
            - Max. Filling volume: 75 l
            - Max. Removable fluid volume: 30 l
            - Weight (empty): 60 kg
            Pump unit:
            - Weight: 1,4 kg

            Machine weight: approx. 9,8 tons
            Space requirement approx.: 4,06 x 3,0 x 2,7 m

            EQUIPMENT:
            - Coolant system, hydraulic unit
            - Various tools
            - Documentation


            There is no guarantee for correctness and completeness of the technical details
            and accessories.
          Datasheet
          Request / Contact

          Jig Boring Machine - Horizontal

          used  Jig Boring Machine - Horizontal DIXI F 310 Y


          • Isabelle Knops
          • Opladener Str. 126
          • 40789 Monheim am Rhein
          • Deutschland

          • +49 (0)2173-4999611
            +49 (0)2173-8546560
          • isabelle.knops@isabelleknops.com
            www.isabelleknops.com
          #2013-E0321 · Jig Boring Machine - Horizontal

          DIXI - F 310 Y - - -

          Technical details
          spindle diameter 120 mm︱x-travel 1.000 mm︱y-travel 980 mm︱total power requirement ca. 40 kW︱weight of the machine ca. 11 t︱dimensions of the machine ca. m︱
          Jig Boring Machine - Horizontal (Precision boring machine) / Brand: DIXI / Type: F 310 Y / Year of construction: 1980 The machine can be inspected by appointment in the factory. Condition: Well used / ready for use. TECHNICAL DATA: - Control: conventionel Travels: - X-axis: 1.000 mm - Y-axis: 980 mm - Z-axis: 760 mm Rotary table: - Table surface: 900 x 1.200 mm - Max. table load: vertical position: 1.500 kg horizontal position: 300 kg - Table swivelling: 360° (degree) - Spindle diameter: 120 mm - Speed range: 0 - 1.600 rpm - Digital display: 0,001 mm Connected loads: - Operating voltage: 3 x 380 V / 50 Hz - Power: 25 kW EQUIPMENT: - Various tool holders - Documentation There is no guarantee for correctness and completeness of the technical details and accessories.
            spindle diameter 120 mm
            x-travel 1.000 mm
            y-travel 980 mm
            total power requirement ca. 40 kW
            weight of the machine ca. 11 t
            Description :
            Jig Boring Machine - Horizontal (Precision boring machine) / Brand: DIXI /
            Type: F 310 Y / Year of construction: 1980

            The machine can be inspected by appointment in the factory.

            Condition: Well used / ready for use.

            TECHNICAL DATA:
            - Control: conventionel

            Travels:
            - X-axis: 1.000 mm
            - Y-axis: 980 mm
            - Z-axis: 760 mm

            Rotary table:
            - Table surface: 900 x 1.200 mm
            - Max. table load:
            vertical position: 1.500 kg
            horizontal position: 300 kg
            - Table swivelling: 360° (degree)

            - Spindle diameter: 120 mm
            - Speed range: 0 - 1.600 rpm

            - Digital display: 0,001 mm

            Connected loads:
            - Operating voltage: 3 x 380 V / 50 Hz
            - Power: 25 kW

            EQUIPMENT:
            - Various tool holders
            - Documentation


            There is no guarantee for correctness and completeness of the technical details
            and accessories.
          Datasheet
          Request / Contact

          Portal - Machining Center

          used  Portal - Machining Center DROOP + REIN TFS 30 50 D40


          • Isabelle Knops
          • Opladener Str. 126
          • 40789 Monheim am Rhein
          • Deutschland

          • +49 (0)2173-4999611
            +49 (0)2173-8546560
          • isabelle.knops@isabelleknops.com
            www.isabelleknops.com
          #2013-E0302 · Portal - Machining Center

          DROOP + REIN - TFS 30 50 D40 - - 2009/2010 - Sinumerik 840D

          Technical details
          x-axis 6.000 mm︱y-axis 4.500 mm︱z-axis 1.500 mm︱c-axis +/- 200° 0︱Control Sinumerik 840D ︱total power requirement 120 kVA︱weight of the machine ca. 80 t︱dimensions of the machine ca. 14.75 x 12 x 6.2 m︱
          Portal machining centre - Droop + Rein - TFS 30 50 D40 (C-axis - integrated milling unit) - Year of construction: 2009/Start-up: 2010 The machine can be inspected by appointment in operation. Very good, operational condition. Technical data: - CNC path control Siemens Sinumerik 840D Main dimensions: - Horizontal gantry passage (between the columns): 4.010 mm - Vertical gantry passage: 2.100 mm - Distance clamping table - spindle nose face milling head: min. 200 mm / max. 1.700 mm - Distance clamping table - spindle centre Angular milling head: min. 200 mm / max. 1.700 mm Travels: - X-axis (Longitudinal clamping table): 6.000 mm - Y-axis (Cross slide transverse): 4.500 mm * from the centre to the right: 2.250 mm * from the centre to the left: 2.250 mm - Z-axis(Vertical milling unit): 1.500 mm - C-axis (Rotate milling head): +/- 200° Clamping table: - Table surface: 3.000 x 5.000 mm - Height over floor: 500 mm - max. Load capacity (centric): 30 tons Equipment (among others): - 3 different milling heads, SK 50 - Milling head changer as pick-up system - Automatic tool changer as tool arena, 140-positions - Tool handling unit executed by 6-axis industrial robot (make: KUKA) with hydraulic double gripper - Documentation - CE marking There is no guarantee for correctness and completeness of the technical details and accessories. Detailed technical data sheet and information on equipment available on request.
            x-axis 6.000 mm
            y-axis 4.500 mm
            z-axis 1.500 mm
            c-axis +/- 200° 0
            Control Sinumerik 840D
            total power requirement 120 kVA
            weight of the machine ca. 80 t
            dimensions of the machine ca. 14.75 x 12 x 6.2 m
            Description :
            Portal machining centre - Droop + Rein - TFS 30 50 D40 (C-axis -
            integrated milling unit) - Year of construction: 2009/Start-up: 2010

            The machine can be inspected by appointment in operation.

            Very good, operational condition.


            Technical data:
            - CNC path control Siemens Sinumerik 840D

            Main dimensions:
            - Horizontal gantry passage (between the columns): 4.010 mm
            - Vertical gantry passage: 2.100 mm
            - Distance clamping table - spindle nose face milling head:
            min. 200 mm / max. 1.700 mm
            - Distance clamping table - spindle centre Angular milling head:
            min. 200 mm / max. 1.700 mm

            Travels:
            - X-axis (Longitudinal clamping table): 6.000 mm
            - Y-axis (Cross slide transverse): 4.500 mm
            * from the centre to the right: 2.250 mm
            * from the centre to the left: 2.250 mm
            - Z-axis(Vertical milling unit): 1.500 mm
            - C-axis (Rotate milling head): +/- 200°

            Clamping table:
            - Table surface: 3.000 x 5.000 mm
            - Height over floor: 500 mm
            - max. Load capacity (centric): 30 tons

            Equipment (among others):
            - 3 different milling heads, SK 50
            - Milling head changer as pick-up system
            - Automatic tool changer as tool arena, 140-positions
            - Tool handling unit executed by 6-axis industrial robot (make: KUKA) with
            hydraulic double gripper

            - Documentation
            - CE marking

            There is no guarantee for correctness and completeness of the technical details
            and accessories.

            Detailed technical data sheet and information on equipment available on request.
          Datasheet
          Request / Contact

          Table Type Boring and Milling Machine

          used  Table Type Boring and Milling Machine TOS-VARNSDORF WH 105 CNC


          • Isabelle Knops
          • Opladener Str. 126
          • 40789 Monheim am Rhein
          • Deutschland

          • +49 (0)2173-4999611
            +49 (0)2173-8546560
          • isabelle.knops@isabelleknops.com
            www.isabelleknops.com
          #2013-E0334 · Table Type Boring and Milling Machine

          TOS-VARNSDORF - WH 105 CNC - - 2000 -

          Technical details
          spindle diameter 105 mm︱x-travel 1.800 mm︱y-travel 1.250 mm︱Control ︱z-axis 1.250 mm︱w-axis 630 mm︱surface area 1.250 x 1.400 mm︱table load max. 3 t︱spindle speed: 2.800 ︱total power requirement kW︱weight of the machine ca. t︱
          Table Type Boring and Milling Machine / Brand: TOS-VARNSDORF / Type: WH 105 CNC Year of construction: 2000 The machine can be inspected by appointment in operation. Condition: Well used / ready for use. Use of the machine exclusively in 1-shift operation ! Operating hours (as of 07 September 2021): - Control on: 73.175 h - Machine on: 36.475 h - Program run: 12.052 h - Spindle operation: 13.907 h TECHNICAL DATA: - CNC control: HEIDENHAIN TNC 426 PB Travels: - X-axis (Cross adjustment of the table): 1.800 mm - Y-axis (Vertical adjustment of the headstock): 1.250 mm - Z-axis (Longitudinal adjustment of the table): 1.250 mm - W-axis (Spindle extension): 630 mm - Table clamping surface: 1.250 x 1.400 mm - Table load max.: 3 tons Spindle: - Spindle diameter: 105 mm - Spindle speed max.: 2.800 rpm - Max. Main engine power: 28 kW EQUIPMENT: - Measuring system: HEIDENHAIN - Drives: SIEMENS - Tool shaft: SK 50 - 1 x Air-/oil cooling unit - 1 x Oil cooling unit - Documentation - CE marking NO chip conveyor ! Without guarantee for completeness and correctness of the technical information and the equipment.
            spindle diameter 105 mm
            x-travel 1.800 mm
            y-travel 1.250 mm
            z-axis 1.250 mm
            w-axis 630 mm
            surface area 1.250 x 1.400 mm
            table load max. 3 t
            spindle speed: 2.800
            Description :
            Table Type Boring and Milling Machine / Brand: TOS-VARNSDORF / Type: WH 105 CNC
            Year of construction: 2000

            The machine can be inspected by appointment in operation.

            Condition: Well used / ready for use.

            Use of the machine exclusively in 1-shift operation !

            Operating hours (as of 07 September 2021):
            - Control on: 73.175 h
            - Machine on: 36.475 h
            - Program run: 12.052 h
            - Spindle operation: 13.907 h

            TECHNICAL DATA:
            - CNC control: HEIDENHAIN TNC 426 PB

            Travels:
            - X-axis (Cross adjustment of the table): 1.800 mm
            - Y-axis (Vertical adjustment of the headstock): 1.250 mm
            - Z-axis (Longitudinal adjustment of the table): 1.250 mm
            - W-axis (Spindle extension): 630 mm
            - Table clamping surface: 1.250 x 1.400 mm
            - Table load max.: 3 tons

            Spindle:
            - Spindle diameter: 105 mm
            - Spindle speed max.: 2.800 rpm
            - Max. Main engine power: 28 kW

            EQUIPMENT:
            - Measuring system: HEIDENHAIN
            - Drives: SIEMENS
            - Tool shaft: SK 50
            - 1 x Air-/oil cooling unit
            - 1 x Oil cooling unit
            - Documentation
            - CE marking

            NO chip conveyor !

            Without guarantee for completeness and correctness of the technical information
            and the equipment.
          Datasheet
          Request / Contact
          used  Table Type Boring and Milling Machine WOTAN CUTMAX 2


          • Isabelle Knops
          • Opladener Str. 126
          • 40789 Monheim am Rhein
          • Deutschland

          • +49 (0)2173-4999611
            +49 (0)2173-8546560
          • isabelle.knops@isabelleknops.com
            www.isabelleknops.com
          #2013-E0355 · Table Type Boring and Milling Machine

          WOTAN - CUTMAX 2 - - 1999 - HEIDENHAIN TNC 426 B

          Technical details
          spindle diameter 120 mm︱x-travel 1.800 mm︱y-travel 2.000 mm︱Control HEIDENHAIN TNC 426 B ︱w-axis 1.370 mm︱spindle stroke 600 mm︱table-size 1.400 x 1.600 mm︱workpiece weight 6 t︱spindle taper ISO 50 ︱spindle turning speed range 20 - 3.000 U/min︱feed speeds 1 - 6.000 mm/min︱rapid traverse 6 m/min︱spindle drive 40 kW︱tool magazin: 60-fach ︱total power requirement 65 kW︱weight of the machine ca. 20 t︱dimensions of the machine ca. 7,2 x 4,9 x 4,5 m︱
          5-axis Table Type Boring and Milling Machine / Brand: WOTAN / Type: CUTMAX 2 / Year of construction: 1999 The machine can be inspected by appointment under working condition. Ready for operation / functional condition. Spindle run time (19.10.2021) approx.: 14.265 h DESCRIPTION: - CNC Control: 5-axis HEIDENHAIN TNC 426 B - Hardened guideways - Tool changer: 60-positions The tool changer is not in use, the electrical control has been disconnected. - Internal spindle cooling - Full B-axis - Chip conveyor - Coolant device - Electronic handwheel TECHNICAL DATA: - Spindle diameter: 120 mm - X-axis: 1.800 mm - Y-axis: 2.000 mm - W-axis: 1.370 mm - Spindle stroke: 600 mm - Table dimensions: 1.400 x 1.600 mm - Table load: 6 tons - Spindle holder: ISO 50 - Spindle speeds: 20 - 3.000 rpm - Feed rate: 1 - 6.000 mm/min - Rapid traverse: 6 m/min - Spindle motor: 40 kW - CE-marking - Documentation - Total power requirement: 65 kW - Machine weight approx.: 20 to - Space requirement approx.: 7,2 x 4,9 x 4,5 m (Installation height of the machine: 4,6 m) Without guarantee for completeness and correctness of the technical data and on the equipment.
            spindle diameter 120 mm
            x-travel 1.800 mm
            y-travel 2.000 mm
            Control HEIDENHAIN TNC 426 B
            w-axis 1.370 mm
            spindle stroke 600 mm
            table-size 1.400 x 1.600 mm
            workpiece weight 6 t
            spindle taper ISO 50
            spindle turning speed range 20 - 3.000 U/min
            feed speeds 1 - 6.000 mm/min
            rapid traverse 6 m/min
            spindle drive 40 kW
            tool magazin: 60-fach
            total power requirement 65 kW
            weight of the machine ca. 20 t
            dimensions of the machine ca. 7,2 x 4,9 x 4,5 m
            Description :
            5-axis Table Type Boring and Milling Machine / Brand: WOTAN / Type: CUTMAX 2 /
            Year of construction: 1999

            The machine can be inspected by appointment under working condition.

            Ready for operation / functional condition.

            Spindle run time (19.10.2021) approx.: 14.265 h

            DESCRIPTION:
            - CNC Control: 5-axis HEIDENHAIN TNC 426 B
            - Hardened guideways
            - Tool changer: 60-positions
            The tool changer is not in use, the electrical control has been disconnected.
            - Internal spindle cooling
            - Full B-axis
            - Chip conveyor
            - Coolant device
            - Electronic handwheel

            TECHNICAL DATA:
            - Spindle diameter: 120 mm

            - X-axis: 1.800 mm
            - Y-axis: 2.000 mm
            - W-axis: 1.370 mm

            - Spindle stroke: 600 mm
            - Table dimensions: 1.400 x 1.600 mm
            - Table load: 6 tons
            - Spindle holder: ISO 50
            - Spindle speeds: 20 - 3.000 rpm
            - Feed rate: 1 - 6.000 mm/min
            - Rapid traverse: 6 m/min
            - Spindle motor: 40 kW
            - CE-marking
            - Documentation

            - Total power requirement: 65 kW

            - Machine weight approx.: 20 to
            - Space requirement approx.: 7,2 x 4,9 x 4,5 m
            (Installation height of the machine: 4,6 m)


            Without guarantee for completeness and correctness of the technical data and on
            the equipment.
          Datasheet
          Request / Contact
          used  Table Type Boring and Milling Machine UNION BFT 110


          • Isabelle Knops
          • Opladener Str. 126
          • 40789 Monheim am Rhein
          • Deutschland

          • +49 (0)2173-4999611
            +49 (0)2173-8546560
          • isabelle.knops@isabelleknops.com
            www.isabelleknops.com
          #2013-E0358 · Table Type Boring and Milling Machine

          UNION - BFT 110 - - 1990/2009 - Heidenhain iTNC 530

          Technical details
          spindle diameter 110 mm︱x-travel 1.985 mm︱y-travel 1.620 mm︱Control Heidenhain iTNC 530 ︱z-axis 1.960 mm︱w-axis 710 mm︱table surface area 1.400 x 1.600 mm︱table rotation 360 °︱spindle taper SK50 ︱spindle turning speed range 6,3 - 1.250 U/min︱spindle drive motor 30 kW︱total power requirement 90 kW︱weight of the machine ca. 28,6 t︱dimensions of the machine ca. 7 x 4,5 x 4,5 m︱
          Table Type Boring and Milling Machine / Brand: WMW UNION / Type: BFT 110 / Year of construction: 1990 / Retrofit: 2009 The retrofit included: - Guideways in X/Y/Z grinded and new sliding layer, Y scraped on - Feed gear completely overhauled - Clamping table scraped open and grinded - Main drive overhauled - Axis clamping completely overhauled - New cable for counterweight - New hydraulic hoses - New working spindle - Hollow spindle bearing seats ground and re-bearing - Telescopic cover overhauled - New electrical cabinet, control, operating pendulum, measuring systems, axis drives, cables - New ball screw The machine can be inspected by appointment under working condition. Very good used condition / ready for use. Operating hours (21.12.2021): - Control on:19.897 h - Machine on: 19.643 h - Program run: 7.244 h - Spindle hours: 6.980 h - Axis: 7.126 h TECHNICAL DATA: CNC control: Heidenhain iTNC 530 - Travels: X-axis: 1.985 mm Y-axis: 1.620 mm Z-axis: 1.960 mm W-axis: 710 mm - Axis drives 1 FT 6: 1 x axis Y, 1 x axis X/Z/B (common drive switchable), 1 x axis W/U (common drive switchable) - Table clamping area: 1.400 x 1.600 mm - Table rotation: 360° - Table load max.: 3,6 tons with even load distribution - Spindle diameter: 110 mm - Spindle holder: SK50 - Spindle speed: 6,3 - 1.250 rpm in 4 speed ranges, hydr. switched - Faceplate: 6,3 - 315 rpm in 2 speed ranges, hydr. switched - Rapid traverse: X/Y: 6.300 mm/min, Y: 4.000 mm/min, W/U: 2.500 mm/min - Main drive: 30 kW, Direct current drive - Connected load: 90 kW - Space requirement Length/Width/Height approx.: 7,0 x 4,5 x 4,5 m - Machine weight approx.: 28,6 tons EQUIPMENT: - Drives: SIEMENS - Measuring systems Heidenhain at X/Y/Z/B/W (new) - Electronic handwheel - Cone receptacles (approx. 30 pieces). The installed millers and the rack shown in the photo are not included in the sale. - Documentation - NO CE marking ! Note: Axis W can only be used as a control axis to a limited extent due to its nature. Axis B is basically a positioning axis. Without guarantee for completeness and correctness of the technical information and the equipment.
            spindle diameter 110 mm
            x-travel 1.985 mm
            y-travel 1.620 mm
            Control Heidenhain iTNC 530
            z-axis 1.960 mm
            w-axis 710 mm
            table surface area 1.400 x 1.600 mm
            table rotation 360 °
            spindle taper SK50
            spindle turning speed range 6,3 - 1.250 U/min
            spindle drive motor 30 kW
            total power requirement 90 kW
            weight of the machine ca. 28,6 t
            dimensions of the machine ca. 7 x 4,5 x 4,5 m
            Description :
            Table Type Boring and Milling Machine / Brand: WMW UNION / Type: BFT 110 /
            Year of construction: 1990 / Retrofit: 2009

            The retrofit included:
            - Guideways in X/Y/Z grinded and new sliding layer, Y scraped on
            - Feed gear completely overhauled
            - Clamping table scraped open and grinded
            - Main drive overhauled
            - Axis clamping completely overhauled
            - New cable for counterweight
            - New hydraulic hoses
            - New working spindle
            - Hollow spindle bearing seats ground and re-bearing
            - Telescopic cover overhauled
            - New electrical cabinet, control, operating pendulum, measuring systems,
            axis drives, cables
            - New ball screw

            The machine can be inspected by appointment under working condition.

            Very good used condition / ready for use.

            Operating hours (21.12.2021):
            - Control on:19.897 h
            - Machine on: 19.643 h
            - Program run: 7.244 h
            - Spindle hours: 6.980 h
            - Axis: 7.126 h

            TECHNICAL DATA:
            CNC control: Heidenhain iTNC 530

            - Travels:
            X-axis: 1.985 mm
            Y-axis: 1.620 mm
            Z-axis: 1.960 mm
            W-axis: 710 mm

            - Axis drives 1 FT 6: 1 x axis Y, 1 x axis X/Z/B (common drive switchable),
            1 x axis W/U (common drive switchable)

            - Table clamping area: 1.400 x 1.600 mm
            - Table rotation: 360°
            - Table load max.: 3,6 tons with even load distribution
            - Spindle diameter: 110 mm
            - Spindle holder: SK50
            - Spindle speed: 6,3 - 1.250 rpm in 4 speed ranges, hydr. switched
            - Faceplate: 6,3 - 315 rpm in 2 speed ranges, hydr. switched
            - Rapid traverse: X/Y: 6.300 mm/min, Y: 4.000 mm/min, W/U: 2.500 mm/min
            - Main drive: 30 kW, Direct current drive
            - Connected load: 90 kW

            - Space requirement Length/Width/Height approx.: 7,0 x 4,5 x 4,5 m
            - Machine weight approx.: 28,6 tons

            EQUIPMENT:
            - Drives: SIEMENS
            - Measuring systems Heidenhain at X/Y/Z/B/W (new)
            - Electronic handwheel
            - Cone receptacles (approx. 30 pieces).
            The installed millers and the rack shown in the photo are not included in the
            sale.
            - Documentation
            - NO CE marking !

            Note: Axis W can only be used as a control axis to a limited extent due to its
            nature. Axis B is basically a positioning axis.

            Without guarantee for completeness and correctness of the technical information
            and the equipment.
          Datasheet
          Request / Contact

          Bed Type Milling Machine - Universal

          used  Bed Type Milling Machine - Universal ANAYAK Performer 2000


          • Isabelle Knops
          • Opladener Str. 126
          • 40789 Monheim am Rhein
          • Deutschland

          • +49 (0)2173-4999611
            +49 (0)2173-8546560
          • isabelle.knops@isabelleknops.com
            www.isabelleknops.com
          #2013-E0345 · Bed Type Milling Machine - Universal

          ANAYAK - Performer 2000 - - 2005 - Heidenhain iTNC 530

          Technical details
          x-travel 2.000 mm︱y-travel 1.000 mm︱z-travel 1.100 mm︱Control Heidenhain iTNC 530 ︱total power requirement 43 kW︱weight of the machine ca. 14 t︱
          Bed Type Milling Machine - Universal / Brand: ANAYAK / Type: Performer 2000 / Year of construction: 2005 Handover of the new machine / commissioning December 2005. The machine can be inspected by appointment under working condition. Operating hours (01.10.2021): - Control on: 26.123 h - Machine on: 24.347 h - Program run: 9.483 h - Spindle runtime: 7.954 h TECHNICAL DATA: - Control: Heidenhain iTNC 530 Travels: - X-axis (Longitudinal): 2.000 mm - Y-axis (Across): 1.000 mm - Z-axis (Vertical): 1.100 mm Table: - Table surface: 2.000 mm - Number and width of T-slots: 5 x 22 - Distance of the T-slots: 150 mm - Table load max.: 5 tons Spindle cone: - Spindle cone: ISO 50 by DIN 69871-B - Tool locking: Mechanical - Tool unblocking: Hydraulic - Tool locking force: 1.500 daN Milling head (horizontal - vertical): - Multi-angle milling head: 45°, 2,5° indexing. - Angular positioning: Automatic A- and B-axis - Rotation lock: Hydraulic - Motor power: 24/38 kW - Constantly changing speed: 60 - 5.000 rpm - Speed ranges: 2 Feeds: - Working feed: 10.000 mm/min - Rapid feed: 20.000 mm/min - Ball screws: Diameter: 63 mm Passage: X: 16 mm, Y-Z: 10 mm Hydraulic unit: - Power: 1,8 kW - Pump capacity: 9 l/min - Working pressure: 110 bar - Container capacity: 100 l Compressed air system: - Input pressure: 6 - 7 bar - Consumption: (6 bar) 175 l/min System Cooling Liquid External Cooling: - Power: 1,36 kW - Pump capacity: 30 l/min - Pressure: 5 bar System Coolant Internal cooling: - Power: 3 kW - Pump capacity: 26 l/min - Pressure: 22 bar Pump automatic lubrication: - Parts to be lubricated: Guides, nuts and brackets of the ball screws - Power: 70 W - Pump capacity: 0,2 l/min - Working pressure: 25 bar - Pressure reduction: 1,6 bar - Safety valve: 25 bar - Container capacity: 6 l - Lubrication system: Single line - oil drain - Dosing system: Direct-acting doser - Lubrication frequency: 30 min - Lubrication duration: 1,5 min - Control systems: pressure gauge, minimum oil level, working pressure, function cycle Automatic lubrication system Milling head: - Parts to be lubricated: Milling head interventions - Power: 70 W - Pump capacity: 0,2 l/min - Working pressure: 25 bar - Pressure reduction: 1,6 bar - Pressure reducing valve: 25 bar - Container capacity: 3 l - Lubrication system: Single line - oil drain - Dosing system: Direct-acting doser - Lubrication frequency: 5 min - Lubrication duration: 1,5 min - Control systems: pressure gauge, minimum oil level, working pressure, functional circuit Accuracy (above 1.000 mm): - Positioning: +/- 0,014 mm - Repeatability: +/- 0,008 mm - Total power requirement: 43 kW - Voltage: 400 V - Frequency: 50 Hz - Total machine weight: 14 tons Machine: 8 tons, Dimensions (Length/Width/Height): 2,7 x 2,1 x 2,94 m Table: 6 tons, Dimensions (Length/Width/Height): 5,7 x 1,3 x 2,1 m EQUIPMENT: - Documention - Data backup available - CE marking There is no guarantee for correctness and completeness of the technical details and accessories.
            x-travel 2.000 mm
            y-travel 1.000 mm
            z-travel 1.100 mm
            Control Heidenhain iTNC 530
            total power requirement 43 kW
            weight of the machine ca. 14 t
            Description :
            Bed Type Milling Machine - Universal / Brand: ANAYAK / Type: Performer 2000 /
            Year of construction: 2005

            Handover of the new machine / commissioning December 2005.

            The machine can be inspected by appointment under working condition.

            Operating hours (01.10.2021):
            - Control on: 26.123 h
            - Machine on: 24.347 h
            - Program run: 9.483 h
            - Spindle runtime: 7.954 h

            TECHNICAL DATA:
            - Control: Heidenhain iTNC 530

            Travels:
            - X-axis (Longitudinal): 2.000 mm
            - Y-axis (Across): 1.000 mm
            - Z-axis (Vertical): 1.100 mm

            Table:
            - Table surface: 2.000 mm
            - Number and width of T-slots: 5 x 22
            - Distance of the T-slots: 150 mm
            - Table load max.: 5 tons

            Spindle cone:
            - Spindle cone: ISO 50 by DIN 69871-B
            - Tool locking: Mechanical
            - Tool unblocking: Hydraulic
            - Tool locking force: 1.500 daN

            Milling head (horizontal - vertical):
            - Multi-angle milling head: 45°, 2,5° indexing.
            - Angular positioning: Automatic A- and B-axis
            - Rotation lock: Hydraulic
            - Motor power: 24/38 kW
            - Constantly changing speed: 60 - 5.000 rpm
            - Speed ranges: 2

            Feeds:
            - Working feed: 10.000 mm/min
            - Rapid feed: 20.000 mm/min
            - Ball screws:
            Diameter: 63 mm
            Passage: X: 16 mm, Y-Z: 10 mm

            Hydraulic unit:
            - Power: 1,8 kW
            - Pump capacity: 9 l/min
            - Working pressure: 110 bar
            - Container capacity: 100 l

            Compressed air system:
            - Input pressure: 6 - 7 bar
            - Consumption: (6 bar) 175 l/min

            System Cooling Liquid External Cooling:
            - Power: 1,36 kW
            - Pump capacity: 30 l/min
            - Pressure: 5 bar

            System Coolant Internal cooling:
            - Power: 3 kW
            - Pump capacity: 26 l/min
            - Pressure: 22 bar

            Pump automatic lubrication:
            - Parts to be lubricated: Guides, nuts and brackets of the ball screws
            - Power: 70 W
            - Pump capacity: 0,2 l/min
            - Working pressure: 25 bar
            - Pressure reduction: 1,6 bar
            - Safety valve: 25 bar
            - Container capacity: 6 l
            - Lubrication system: Single line - oil drain
            - Dosing system: Direct-acting doser
            - Lubrication frequency: 30 min
            - Lubrication duration: 1,5 min
            - Control systems: pressure gauge, minimum oil level, working pressure,
            function cycle

            Automatic lubrication system Milling head:
            - Parts to be lubricated: Milling head interventions
            - Power: 70 W
            - Pump capacity: 0,2 l/min
            - Working pressure: 25 bar
            - Pressure reduction: 1,6 bar
            - Pressure reducing valve: 25 bar
            - Container capacity: 3 l
            - Lubrication system: Single line - oil drain
            - Dosing system: Direct-acting doser
            - Lubrication frequency: 5 min
            - Lubrication duration: 1,5 min
            - Control systems: pressure gauge, minimum oil level, working pressure,
            functional circuit

            Accuracy (above 1.000 mm):
            - Positioning: +/- 0,014 mm
            - Repeatability: +/- 0,008 mm

            - Total power requirement: 43 kW
            - Voltage: 400 V
            - Frequency: 50 Hz

            - Total machine weight: 14 tons
            Machine: 8 tons, Dimensions (Length/Width/Height): 2,7 x 2,1 x 2,94 m
            Table: 6 tons, Dimensions (Length/Width/Height): 5,7 x 1,3 x 2,1 m

            EQUIPMENT:
            - Documention
            - Data backup available
            - CE marking


            There is no guarantee for correctness and completeness of the technical details
            and accessories.
          Datasheet
          Request / Contact

          milling machining centers - universal

          used  milling machining centers - universal DECKEL MAHO DMC 100 U


          • Isabelle Knops
          • Opladener Str. 126
          • 40789 Monheim am Rhein
          • Deutschland

          • +49 (0)2173-4999611
            +49 (0)2173-8546560
          • isabelle.knops@isabelleknops.com
            www.isabelleknops.com
          #2013-E0323 · milling machining centers - universal

          DECKEL MAHO - DMC 100 U - - 2004 - Heidenhain iTNC 530

          Technical details
          x-travel 1.000 mm︱y-travel 1.000 mm︱z-travel 1.000 mm︱Control Heidenhain iTNC 530 ︱total power requirement 56 kVA︱weight of the machine ca. 19 t︱dimensions of the machine ca. 5,4 x 3,2 x 3,4 m︱
          Machining center - Universal Brand: DECKEL MAHO / Type: DMC 100 U / Year of construction: 2004 Operating hours (12. July 2021): - Control on: 137.915 h - Machine on: 112.731 h - Program run: 58.982 h The machine can be inspected by appointment under working condition. Condition: Good used condition / ready for operation. No repair backlog. TECHNICAL SPECIFICATIONS: Travels: - 1.000 mm - 1.000 mm - 1.000 mm - Swivelling milling head - Main drive: Motor spindle 10.000 rpm - Tool holder: ISO SK 50 by DIN 69871 - Tool magazine with 60 magazine positions - Feeds: 20 - 10.000 mm/min - Rapid traverse: 60.000 mm/min - 3D-Path control: Heidenhain iTNC 530 - Rotary pallet changer - Number of pallet positions: 2 - Clamping surface: 1.000 x 800 mm - Workpiece weight max.: 1.000 kg Dimensions / Weights: - Space requirement (Length/Width/Height): 5,4 x 3,2 x 3,4 m - Total weight, incl. accessories approx.: 19 tons Transport weights: Truck 1 Machine: 17,5 tons Truck 2 Accessories: 2,9 tons EQUIPMENT: - Coolant tank, Tank capacity: 980 l, 40 bar - Internal coolant trough the spindle - Workpiece measuring probe - Chip conveyor - Documentation - CE marking There is no guarantee for correctness and completeness of the technical details and accessoires.
            x-travel 1.000 mm
            y-travel 1.000 mm
            z-travel 1.000 mm
            Control Heidenhain iTNC 530
            total power requirement 56 kVA
            weight of the machine ca. 19 t
            dimensions of the machine ca. 5,4 x 3,2 x 3,4 m
            Description :
            Machining center - Universal
            Brand: DECKEL MAHO / Type: DMC 100 U / Year of construction: 2004

            Operating hours (12. July 2021):
            - Control on: 137.915 h
            - Machine on: 112.731 h
            - Program run: 58.982 h

            The machine can be inspected by appointment under working condition.

            Condition: Good used condition / ready for operation.
            No repair backlog.

            TECHNICAL SPECIFICATIONS:
            Travels:
            - 1.000 mm
            - 1.000 mm
            - 1.000 mm

            - Swivelling milling head
            - Main drive: Motor spindle 10.000 rpm
            - Tool holder: ISO SK 50 by DIN 69871
            - Tool magazine with 60 magazine positions

            - Feeds: 20 - 10.000 mm/min
            - Rapid traverse: 60.000 mm/min

            - 3D-Path control: Heidenhain iTNC 530
            - Rotary pallet changer
            - Number of pallet positions: 2
            - Clamping surface: 1.000 x 800 mm
            - Workpiece weight max.: 1.000 kg

            Dimensions / Weights:
            - Space requirement (Length/Width/Height): 5,4 x 3,2 x 3,4 m
            - Total weight, incl. accessories approx.: 19 tons
            Transport weights:
            Truck 1 Machine: 17,5 tons
            Truck 2 Accessories: 2,9 tons


            EQUIPMENT:
            - Coolant tank, Tank capacity: 980 l, 40 bar
            - Internal coolant trough the spindle
            - Workpiece measuring probe
            - Chip conveyor
            - Documentation
            - CE marking


            There is no guarantee for correctness and completeness of the technical details
            and accessoires.


          Datasheet
          Request / Contact
          used  milling machining centers - universal HERMLE U 1000 A


          • Isabelle Knops
          • Opladener Str. 126
          • 40789 Monheim am Rhein
          • Deutschland

          • +49 (0)2173-4999611
            +49 (0)2173-8546560
          • isabelle.knops@isabelleknops.com
            www.isabelleknops.com
          #2013-E0335 · milling machining centers - universal

          HERMLE - U 1000 A - - 2003 - HEIDENHAIN iTNC 530

          Technical details
          x-travel 1.000 (1.245) mm︱y-travel 630 mm︱z-travel 550 mm︱Control HEIDENHAIN iTNC 530 ︱total power requirement 17 kVA︱weight of the machine ca. t︱dimensions of the machine ca. m︱
          Milling Machining Centre - Universal / Brand: HERMLE / Type: U 1000 A / Year of construction: 2003 (4.5-axis machine: 4 axes + swivel head, approach axis) The machine can be inspected by appointment under working condition. Condition: Ready for operation, fully functional. Operating hours (as of 07 September 2021): - Control on: 37.628 h - Machine on: 36.859 h - Program run: 12.019 h - Spindle on: 9.339 h - Axes in motion: 10.303 h TECHNICAL DATA: - Control: HEIDENHAIN iTNC 530 Travels: - X-axis: 1.000 (1.245) mm (depending on the milling head position) - Y-axis: 630 mm - Z-axis: 550 mm - C-axis (NC-Rotary table): 360° - Universal milling head with quill: 90° Milling head position: - Vertical: X-axis = 1.000 mm - 0 - 39°: X-axis = 1.000 mm - 40 - 90°: X-axis = 1.245 mm Spindle: - Speed range: 20 - 7.000 rpm - Tool holder: SK 40 - Drive power approx.: 7,5 kW Feeds and rapid traverse: - Feed range X/Y-axis: 1 - 20.000 mm/min - Rapid traverse X/Y approx.: 20 m/min - Feed range Z-axis: 1 - 15.000 mm/min - Rapid traverse approx.: 10 m/min NC-Rotary table: - Clamping surface Ø: 800 mm - Table load max.: 700 kg - Weight of the table: 880 kg - Rotation range of the NC-Rotary table (C-axis): 360° - Table top: Number / Width of the T-Slots (arranged in a star shape): 8/14 H7 - Centering hole: Ø 32 H6/15 deep - Measuring system accuracy: Resolution: +/- 8" - Partial accuracy: +/- 8" - C-axis speed: max. Rotation speed (at 10%): 11 rpm Connection values: - Operating voltage: 400 V/50 Hz - Control voltage: 24 V - Total nominal current: 24 A - Total power requirement: 17 kVA - Total weight approx.: 6,5 tons EQUIPMENT: - Tool magazine positions: 16 - Full protection cabin - Coolant device - Swiveling control panel - Electronic handwheel - Documentation - CE marking NO chip conveyor ! There is no guarantee for correctness and completeness of the technical details and accessories.
            x-travel 1.000 (1.245) mm
            y-travel 630 mm
            z-travel 550 mm
            Control HEIDENHAIN iTNC 530
            total power requirement 17 kVA
            Description :
            Milling Machining Centre - Universal / Brand: HERMLE / Type: U 1000 A /
            Year of construction: 2003 (4.5-axis machine: 4 axes + swivel head,
            approach axis)

            The machine can be inspected by appointment under working condition.

            Condition: Ready for operation, fully functional.

            Operating hours (as of 07 September 2021):
            - Control on: 37.628 h
            - Machine on: 36.859 h
            - Program run: 12.019 h
            - Spindle on: 9.339 h
            - Axes in motion: 10.303 h

            TECHNICAL DATA:
            - Control: HEIDENHAIN iTNC 530

            Travels:
            - X-axis: 1.000 (1.245) mm (depending on the milling head position)
            - Y-axis: 630 mm
            - Z-axis: 550 mm
            - C-axis (NC-Rotary table): 360°

            - Universal milling head with quill: 90°


            Milling head position:
            - Vertical: X-axis = 1.000 mm
            - 0 - 39°: X-axis = 1.000 mm
            - 40 - 90°: X-axis = 1.245 mm

            Spindle:
            - Speed range: 20 - 7.000 rpm
            - Tool holder: SK 40
            - Drive power approx.: 7,5 kW

            Feeds and rapid traverse:
            - Feed range X/Y-axis: 1 - 20.000 mm/min
            - Rapid traverse X/Y approx.: 20 m/min
            - Feed range Z-axis: 1 - 15.000 mm/min
            - Rapid traverse approx.: 10 m/min

            NC-Rotary table:
            - Clamping surface Ø: 800 mm
            - Table load max.: 700 kg
            - Weight of the table: 880 kg
            - Rotation range of the NC-Rotary table (C-axis): 360°
            - Table top:
            Number / Width of the T-Slots (arranged in a star shape): 8/14 H7
            - Centering hole: Ø 32 H6/15 deep
            - Measuring system accuracy:
            Resolution: +/- 8"
            - Partial accuracy: +/- 8"
            - C-axis speed:
            max. Rotation speed (at 10%): 11 rpm

            Connection values:
            - Operating voltage: 400 V/50 Hz
            - Control voltage: 24 V
            - Total nominal current: 24 A
            - Total power requirement: 17 kVA

            - Total weight approx.: 6,5 tons


            EQUIPMENT:
            - Tool magazine positions: 16
            - Full protection cabin
            - Coolant device
            - Swiveling control panel
            - Electronic handwheel
            - Documentation
            - CE marking

            NO chip conveyor !

            There is no guarantee for correctness and completeness of the technical details
            and accessories.
          Datasheet
          Request / Contact
          used  milling machining centers - universal DECKEL MAHO DMC 160 U


          • Isabelle Knops
          • Opladener Str. 126
          • 40789 Monheim am Rhein
          • Deutschland

          • +49 (0)2173-4999611
            +49 (0)2173-8546560
          • isabelle.knops@isabelleknops.com
            www.isabelleknops.com
          #2013-E0322 · milling machining centers - universal

          DECKEL MAHO - DMC 160 U - - 2002 - Heidenhain iTNC 530

          Technical details
          x-travel 1.600 mm︱y-travel 1.250 mm︱z-travel 1.000 mm︱Control Heidenhain iTNC 530 ︱total power requirement 68,5 kVA︱weight of the machine ca. 39 + 9 t︱dimensions of the machine ca. 9300 x 7320 x 3895 mm︱
          5-axis simultaneous machining center Brand: DECKEL MAHO / Type: DMC 160 U / Year of construction: 2002 Operating hours (12. July 2021): - Control on: 147.860 h - Machine on: 83.128 h - Program run: 39.929 h The machine can be inspected by appointment in operation. Condition: Good used condition / ready for immediate use. No repair backlog. TECHNICAL SPECIFICATIONS / EQUIPMENT: - X: 1.600 mm x Y: 1.250 mm x Z: 1.000 mm - Universal milling head with controlled B-axis - Tool magazine with 60 magazine positions - Rotary pallet changer - 2 paletts 1.250 mm x 1.000 mm - 3D-Path control: Heidenhain iTNC 530 - Tool breakage control - Chip conveyor There is no guarantee for correctness and completeness of the technical details and accessoires. Detailed technical data and information of the equipment available on request.
            x-travel 1.600 mm
            y-travel 1.250 mm
            z-travel 1.000 mm
            Control Heidenhain iTNC 530
            total power requirement 68,5 kVA
            weight of the machine ca. 39 + 9 t
            dimensions of the machine ca. 9300 x 7320 x 3895 mm
            Description :
            5-axis simultaneous machining center
            Brand: DECKEL MAHO / Type: DMC 160 U / Year of construction: 2002


            Operating hours (12. July 2021):
            - Control on: 147.860 h
            - Machine on: 83.128 h
            - Program run: 39.929 h

            The machine can be inspected by appointment in operation.

            Condition: Good used condition / ready for immediate use.
            No repair backlog.


            TECHNICAL SPECIFICATIONS / EQUIPMENT:

            - X: 1.600 mm x Y: 1.250 mm x Z: 1.000 mm
            - Universal milling head with controlled B-axis
            - Tool magazine with 60 magazine positions
            - Rotary pallet changer
            - 2 paletts 1.250 mm x 1.000 mm
            - 3D-Path control: Heidenhain iTNC 530
            - Tool breakage control
            - Chip conveyor


            There is no guarantee for correctness and completeness of the technical details
            and accessoires.


            Detailed technical data and information of the equipment available on request.
          Datasheet
          Request / Contact
          used  milling machining centers - universal DECKEL MAHO DMU 100 T


          • Isabelle Knops
          • Opladener Str. 126
          • 40789 Monheim am Rhein
          • Deutschland

          • +49 (0)2173-4999611
            +49 (0)2173-8546560
          • isabelle.knops@isabelleknops.com
            www.isabelleknops.com
          #2013-E0351 · milling machining centers - universal

          DECKEL MAHO - DMU 100 T - - 2001 - Heidenhain TNC 426/430

          Technical details
          x-travel 1.060 mm︱y-travel 710 mm︱z-travel 710 mm︱Control Heidenhain TNC 426/430 ︱total power requirement 80 kVA︱weight of the machine ca. 11,5 t︱dimensions of the machine ca. 4,5 x 5,0 x 3,5 m︱
          Milling Machining Center - Universal - 5-axis milling Brand: DECKEL MAHO / Type: DMU 100 T / Year of construction: 2001 Operating hours (as of 15.10.2021): - Machine on: 85.625 h - Spindle hours: 20.068 h The machine can be inspected by appointment in the factory under power. Good used condition / ready for use. TECHNICAL SPECIFICATIONS: - CNC Control: Heidenhain TNC 426/430 Travels: - X-axis: 1.060 mm - Y-axis: 710 mm - Z-axis: 710 mm - B-axis: 360° - C-axis: -30/120° - NC swivel milling head - Main drive: Motor spindle 12.000 rpm - Tool holder: SK 40 nach DIN 69871 - Clamping surface table rigid: 1.500 x 795 mm * Workpiece weight max.: 800 kg - Rotary table diameter: 800 mm * Workpiece weight max.: 500 kg Tool magazine: - Magazine places (2 x 16): 32 positions - Max. tool diameter (with all positions occupied): * Magazine 1: 130 mm * Magazine 2: 80 mm - Tool length max. from spindle nose: 315 mm - Max. tool weight with automatic tool change: 8 kg - Total tool weight in magazine max.: 160 kg - Feed drive: AC servo motors in digital technology for X,Y,Z-axis - Feed rate: * X-, Y-, Z-axis infinitely programmable: 20 - 15.000 mm/min - Rapid traverse X-, Y-, Z-axis: 30 m/min - Set-up operation X-, Y-, Z-axis: 20 - 2.000 mm/min Position measuring system: - Resolution X-, Y-, Z-axis: 0,001 mm - Input unit X-, Y-, Z-axis: 0,001 mm - Position tolerance X-, Y-, Z-axis: 0,010 mm - Total power requirement: 80 kVA Dimensions / Weight: - Space requirement (Length/Width/Height) approx.: 6,2 x 5,0 x 2,5 m - Total weight approx.: 10 tons EQUIPMENT: - Cooling lubricant system, tank capacity: 250 l - Touch probe Heidenhain - Electronic handwheel - Chip conveyor - Documentation - CE marking No internal coolant trough the spindle ! There is no guarantee for correctness and completeness of the technical details and accessoires.
            x-travel 1.060 mm
            y-travel 710 mm
            z-travel 710 mm
            Control Heidenhain TNC 426/430
            total power requirement 80 kVA
            weight of the machine ca. 11,5 t
            dimensions of the machine ca. 4,5 x 5,0 x 3,5 m
            Description :
            Milling Machining Center - Universal - 5-axis milling
            Brand: DECKEL MAHO / Type: DMU 100 T / Year of construction: 2001

            Operating hours (as of 15.10.2021):
            - Machine on: 85.625 h
            - Spindle hours: 20.068 h

            The machine can be inspected by appointment in the factory under power.

            Good used condition / ready for use.

            TECHNICAL SPECIFICATIONS:
            - CNC Control: Heidenhain TNC 426/430

            Travels:
            - X-axis: 1.060 mm
            - Y-axis: 710 mm
            - Z-axis: 710 mm
            - B-axis: 360°
            - C-axis: -30/120°

            - NC swivel milling head
            - Main drive: Motor spindle 12.000 rpm
            - Tool holder: SK 40 nach DIN 69871

            - Clamping surface table rigid: 1.500 x 795 mm
            * Workpiece weight max.: 800 kg
            - Rotary table diameter: 800 mm
            * Workpiece weight max.: 500 kg

            Tool magazine:
            - Magazine places (2 x 16): 32 positions
            - Max. tool diameter (with all positions occupied):
            * Magazine 1: 130 mm
            * Magazine 2: 80 mm
            - Tool length max. from spindle nose: 315 mm
            - Max. tool weight with automatic tool change: 8 kg
            - Total tool weight in magazine max.: 160 kg

            - Feed drive: AC servo motors in digital technology for X,Y,Z-axis
            - Feed rate:
            * X-, Y-, Z-axis infinitely programmable: 20 - 15.000 mm/min
            - Rapid traverse X-, Y-, Z-axis: 30 m/min
            - Set-up operation X-, Y-, Z-axis: 20 - 2.000 mm/min

            Position measuring system:
            - Resolution X-, Y-, Z-axis: 0,001 mm
            - Input unit X-, Y-, Z-axis: 0,001 mm
            - Position tolerance X-, Y-, Z-axis: 0,010 mm

            - Total power requirement: 80 kVA

            Dimensions / Weight:
            - Space requirement (Length/Width/Height) approx.: 6,2 x 5,0 x 2,5 m
            - Total weight approx.: 10 tons


            EQUIPMENT:
            - Cooling lubricant system, tank capacity: 250 l
            - Touch probe Heidenhain
            - Electronic handwheel
            - Chip conveyor
            - Documentation
            - CE marking

            No internal coolant trough the spindle !

            There is no guarantee for correctness and completeness of the technical details
            and accessoires.
          Datasheet
          Request / Contact

          milling machining centers - vertical

          used  milling machining centers - vertical MORI SEIKI NMV 5000 DCG


          • Isabelle Knops
          • Opladener Str. 126
          • 40789 Monheim am Rhein
          • Deutschland

          • +49 (0)2173-4999611
            +49 (0)2173-8546560
          • isabelle.knops@isabelleknops.com
            www.isabelleknops.com
          #2013-E0336 · milling machining centers - vertical

          MORI SEIKI - NMV 5000 DCG - - 2008 - Fanuc MSX 711

          Technical details
          x-travel 730 mm︱y-travel 510 mm︱z-travel 510 mm︱Control Fanuc MSX 711 ︱total power requirement 54 kVA︱weight of the machine ca. 12,4 t︱dimensions of the machine ca. 3817 x 2691 x 3264 m︱
          5-Axis-Milling Machining Center - Vertical / Brand: DMG MORI SEIKI / Type: NMV 5000 DCG / Year of construction: 2008 The machine can be inspected by appointment under working condition. Operating hours (as of 13.09.2021): - Total switch-on hours: 50.315 h - Spindle runtime: 1.936 h (spindle overhauled) TECHNICAL SPECIFICATIONS: - CNC control: Fanuc MSX 711 MAPPS-III Travels: - X-axis: 730 mm - Y-axis: 510 mm - Z-axis: 510 mm - B-axis: + 160° - 180° - C-axis: 360° Milling spindle: - Spindle speed max.: 20.000 rpm - Drive power: 22/11 kW (30min/continuous operation) - Torque: 118/98/80 Nm (25% ED/15 min/continuous operation) - Rapid traverse X/Y/Z: 50/50/40 m/min Working table: - Table diameter: 500 mm - Table load max.: 300 kg - Workpiece dimensions max.: Ø 700 x 450 mm Tool magazine: - Tool magazine: 30-positions - Tool diameter max.: 90/125 mm (without/with adjacent tools) - Tool length max.: 300 mm - Tool weight max.: 8 kg - Tool change time: 1,8 sec. - Tool holder: SK40 - Total power requirement: 54 kVA - Machine weight approx.: 12,4 tons - Dimensions Length/Width/Height: 3.817 x 2.691 x 3.264 mm EQUIPMENT/ACCESSORIES: - Internal coolant supply through the spindle - KNOLL Coolant system, up to 50 bar - RENISHAW Touch probe - Chip conveyor - Documentation - CE marking There is no guarantee for correctness and completeness of the technical details and accessories.
            x-travel 730 mm
            y-travel 510 mm
            z-travel 510 mm
            Control Fanuc MSX 711
            total power requirement 54 kVA
            weight of the machine ca. 12,4 t
            dimensions of the machine ca. 3817 x 2691 x 3264 m
            Description :
            5-Axis-Milling Machining Center - Vertical / Brand: DMG MORI SEIKI /
            Type: NMV 5000 DCG / Year of construction: 2008

            The machine can be inspected by appointment under working condition.

            Operating hours (as of 13.09.2021):
            - Total switch-on hours: 50.315 h
            - Spindle runtime: 1.936 h (spindle overhauled)

            TECHNICAL SPECIFICATIONS:
            - CNC control: Fanuc MSX 711 MAPPS-III

            Travels:
            - X-axis: 730 mm
            - Y-axis: 510 mm
            - Z-axis: 510 mm
            - B-axis: + 160° - 180°
            - C-axis: 360°

            Milling spindle:
            - Spindle speed max.: 20.000 rpm
            - Drive power: 22/11 kW (30min/continuous operation)
            - Torque: 118/98/80 Nm (25% ED/15 min/continuous operation)

            - Rapid traverse X/Y/Z: 50/50/40 m/min

            Working table:
            - Table diameter: 500 mm
            - Table load max.: 300 kg
            - Workpiece dimensions max.: Ø 700 x 450 mm

            Tool magazine:
            - Tool magazine: 30-positions
            - Tool diameter max.: 90/125 mm (without/with adjacent tools)
            - Tool length max.: 300 mm
            - Tool weight max.: 8 kg
            - Tool change time: 1,8 sec.
            - Tool holder: SK40

            - Total power requirement: 54 kVA
            - Machine weight approx.: 12,4 tons
            - Dimensions Length/Width/Height: 3.817 x 2.691 x 3.264 mm

            EQUIPMENT/ACCESSORIES:
            - Internal coolant supply through the spindle
            - KNOLL Coolant system, up to 50 bar
            - RENISHAW Touch probe
            - Chip conveyor
            - Documentation
            - CE marking

            There is no guarantee for correctness and completeness of the technical details
            and accessories.
          Datasheet
          Request / Contact
          used  milling machining centers - vertical MIKRON VCP 1350


          • Isabelle Knops
          • Opladener Str. 126
          • 40789 Monheim am Rhein
          • Deutschland

          • +49 (0)2173-4999611
            +49 (0)2173-8546560
          • isabelle.knops@isabelleknops.com
            www.isabelleknops.com
          #2013-E0304 · milling machining centers - vertical

          MIKRON - VCP 1350 - - 2000 - HEIDENHAIN TNC 426 M

          Technical details
          x-travel 1.350 mm︱y-travel 900 mm︱z-travel 750 mm︱Control HEIDENHAIN TNC 426 M ︱total power requirement 46 kW︱weight of the machine ca. 1,1 t︱dimensions of the machine ca. 4,13 x 3,68 x 3,15 m︱
          Milling machining centre - vertical / Brand: MIKRON / Type: VCP 1350 Year of construction: 2000 The machine can be inspected by appointment in the factory under power. Condition: Well maintained, ready for operation. Operating hours: - Control on: 86.539 h - Machine on: 46.503 h - Program run: 49.152 h - Dive on: 45.255 h - Spindle on: 3.110 h Technical specifications: CNC control: Heidenhain TNC 426 M Travels: - X-axis: 1.350 mm - Y-axis: 900 mm - Z-axis: 750 mm Main spindle: - Speed range: 0 - 12.000 rpm stepless - Drive power - Main spindle: 25 kW - Distance spindle nose and table: 145 - 885 mm Working table: - Clamping surface: 1.425 x 860 mm - Max. Table load: 1.800 kg - T-slots: 10 pieces (1 x 18H7, 9 x 18H12) Tool changer (with double arm gripper): - Number of magazine positions: 46 positions (Space-coded or variable storage) - Tool holder: SK40 - Max. Tool diameter: 80 (130) mm - Max. Tool length: 300 mm - Max. Tool weight: 8,0 kg - Max. Magazine load: 200 kg - Changeover time chip - chip: approx. 12,0 sec Feeds: Rapid traverse (X/Y/Z): 30 m/min - Total power requirement: 46 kW - Machine weight: approx. 10 tons - Space requirement: approx. 4.130 x 3.680 x 3.150 mm Equipment: - CE marking - Documentation - Chip conveyor (scraper belt) - Coolant device, tank volume: 650 l - Internal coolant supply through the spindle - Hydraulic unit - Spindle oil cooler - Electronic handwheel, Heidenhain HR 336 There is no guarantee for correctness and completeness of the technical details and accessories.
            x-travel 1.350 mm
            y-travel 900 mm
            z-travel 750 mm
            Control HEIDENHAIN TNC 426 M
            total power requirement 46 kW
            weight of the machine ca. 1,1 t
            dimensions of the machine ca. 4,13 x 3,68 x 3,15 m
            Description :
            Milling machining centre - vertical / Brand: MIKRON / Type: VCP 1350
            Year of construction: 2000

            The machine can be inspected by appointment in the factory under power.

            Condition: Well maintained, ready for operation.

            Operating hours:
            - Control on: 86.539 h
            - Machine on: 46.503 h
            - Program run: 49.152 h
            - Dive on: 45.255 h
            - Spindle on: 3.110 h

            Technical specifications:
            CNC control: Heidenhain TNC 426 M

            Travels:
            - X-axis: 1.350 mm
            - Y-axis: 900 mm
            - Z-axis: 750 mm

            Main spindle:
            - Speed range: 0 - 12.000 rpm stepless
            - Drive power - Main spindle: 25 kW
            - Distance spindle nose and table: 145 - 885 mm

            Working table:
            - Clamping surface: 1.425 x 860 mm
            - Max. Table load: 1.800 kg
            - T-slots: 10 pieces (1 x 18H7, 9 x 18H12)

            Tool changer (with double arm gripper):
            - Number of magazine positions: 46 positions (Space-coded or variable storage)
            - Tool holder: SK40
            - Max. Tool diameter: 80 (130) mm
            - Max. Tool length: 300 mm
            - Max. Tool weight: 8,0 kg
            - Max. Magazine load: 200 kg
            - Changeover time chip - chip: approx. 12,0 sec

            Feeds:
            Rapid traverse (X/Y/Z): 30 m/min

            - Total power requirement: 46 kW
            - Machine weight: approx. 10 tons
            - Space requirement: approx. 4.130 x 3.680 x 3.150 mm

            Equipment:
            - CE marking
            - Documentation
            - Chip conveyor (scraper belt)
            - Coolant device, tank volume: 650 l
            - Internal coolant supply through the spindle
            - Hydraulic unit
            - Spindle oil cooler
            - Electronic handwheel, Heidenhain HR 336


            There is no guarantee for correctness and completeness of the technical details
            and accessories.

          Datasheet
          Request / Contact
          used  milling machining centers - vertical MAZAK MAZATECH V-550


          • Isabelle Knops
          • Opladener Str. 126
          • 40789 Monheim am Rhein
          • Deutschland

          • +49 (0)2173-4999611
            +49 (0)2173-8546560
          • isabelle.knops@isabelleknops.com
            www.isabelleknops.com
          #2013-E0287 · milling machining centers - vertical

          MAZAK - MAZATECH V-550 - - - MAZATROL M32

          Technical details
          x-travel 1.540 mm︱y-travel 560 mm︱z-travel 550 mm︱Control MAZATROL M32 ︱total power requirement kW︱weight of the machine ca. 10,5 t︱
          Milling machining center - vertical Brand: MAZAK / Type: MAZATECH V-550 Type B / Year of construction: 09/1990 The machine can be inspected by appointment under working condition. Condition: Very well maintained, regularly serviced, ready for use. Used in 1-shift operation. TECHNICAL SPECIFICATIONS: - CNC control: MAZATROL M32 Travels: - X-axis: 1.540 mm - Y-axis: 560 mm - Z-axis: 550 mm Working table: - Pallet-/Table size: 1 x 1.740 x 550 mm - Tool magazine: 30-fold - Tool holder: SK50 - Machine weight: 10,5 tons - Dimensions: 3.300 x 3.100 x 2.600 mm EQUIPMENT: - Internal coolant supply, 15 bar - Measuring probe , Renishaw MP3 - Chip tray - Documentation Additional photos available upon request. There is no guarantee for correctness and completeness of the technical details and accessories.
            x-travel 1.540 mm
            y-travel 560 mm
            z-travel 550 mm
            Control MAZATROL M32
            weight of the machine ca. 10,5 t
            Description :
            Milling machining center - vertical
            Brand: MAZAK / Type: MAZATECH V-550 Type B / Year of construction: 09/1990

            The machine can be inspected by appointment under working condition.

            Condition: Very well maintained, regularly serviced, ready for use.

            Used in 1-shift operation.

            TECHNICAL SPECIFICATIONS:
            - CNC control: MAZATROL M32

            Travels:
            - X-axis: 1.540 mm
            - Y-axis: 560 mm
            - Z-axis: 550 mm

            Working table:
            - Pallet-/Table size: 1 x 1.740 x 550 mm

            - Tool magazine: 30-fold
            - Tool holder: SK50

            - Machine weight: 10,5 tons
            - Dimensions: 3.300 x 3.100 x 2.600 mm

            EQUIPMENT:
            - Internal coolant supply, 15 bar
            - Measuring probe , Renishaw MP3
            - Chip tray
            - Documentation


            Additional photos available upon request.

            There is no guarantee for correctness and completeness of the technical details
            and accessories.

          Datasheet
          Request / Contact

          Travelling column milling - fixed table

          used  Travelling column milling - fixed table AsquithButler Power Centre HPB


          • Isabelle Knops
          • Opladener Str. 126
          • 40789 Monheim am Rhein
          • Deutschland

          • +49 (0)2173-4999611
            +49 (0)2173-8546560
          • isabelle.knops@isabelleknops.com
            www.isabelleknops.com
          #2013-E0342 · Travelling column milling - fixed table

          AsquithButler - Power Centre HPB - - 1999 - HEIDENHAIN TNC 426 PB

          Technical details
          travel -x axis 8.200 mm︱travel -y axis 1.500 mm︱travel -z axis 1.250 mm︱Control HEIDENHAIN TNC 426 PB ︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱
          Universal milling and boring machine in rigid bed design with movable column / Brand: AsquithButler / Type: Power Centre HPB Year of construction: 1999 The machine can be inspected by appointment in the factory under power. Condition: Functional / ready for operation. Operating hours approx.: - Control on: 49.532 h - Machine on: 70.151 h - Program run: 24.706 h - Spindle runtime: 18.494 h TECHNICAL DATA: Travels: - X-axis (Longitudinal movement): 8.200 mm - Y-axis (Vertical movement): 1.500 mm - Z-axis (Cross movement): 1.250 mm Machine table: - Table dimensions: 10.000 x 1.000 mm - Number of T-slots: 6 x 22 mm - Table load: 5 t/m2 Working spindle: - Spindle speed: 3.000 rpm - Spindle drive power: 30 kW - Spindle torque: 80 Nm - Spindle holder: HSK 100 - Tool clamping: with disc springs - Release tool: hydraulic - Tool clamping force: 13.000 N Feeds / rapid traverse in all three axes (X,Y,Z): - Work feed: 1 - 20.000 mm/min - Rapid traverse: 20.000 mm/min - Feed force: 20.000 N Milling head automatically swivelling: - 45° version - Swivel range C-axis: 144 x 2,5° - Swivel range A-axis horizontal/vertical Automatic tool changer (chain magazine) ATC 60 horizontal and vertical: - Number of tool positions: 60 - Tool length max.: 440 mm - Tool diameter max.: 120 mm - Tool diameter with free secondary stations max.: 200 mm - Tool weight max.: 25 kg - Tool recognition: Place coding Average tool changing time: - from chip to chip approx.: 28 sec Electrical connections: - complete 400 V, 50 Hz - Number of phases: 3 - Phase current: 100 A - Earth wire: 50 A Air supply: - Air pressure: 6 bar - Capacity: 900 l/min Condition clean and pure EQUIPMENT: - Heidenhain CNC control: TNC 426 PB - All axes with roller guides - High-pressure cooling, Brand: KNOLL, Type: FVR 750 Coolant through the spindle, 10 bar, 30 l/min Coolant via spray ring: 5 bar, 30 l/min complete with coolant tank, tank volume: 750 l, Centrifugal pump and filter system (0.025 mm) - Chip conveyor (slat-band conveyor) Longitudinal travel (X): 8.200 mm Ejection height above floor: 1.600 mm - Automatic hydraulic tool clamping - Ball screws in Y + Z axes, X-axis rack drive - Pendant control panel with CNC control and all operating elements for CNC and manual operation - Measuring systems (Heidenhain) for all axes - Digital-Siemens feed drives all axes - Feed rates and rapid traverse in all axes: 20.000 mm/min - Automatic central lubrication - Telescopic cover for the longitudinal axis - Electronic handwheel HR 410 - Halogen machine light - Machine is equipped for pendulum machining with a partition wall for 2 workstations, which can be removed if required. - Chip protection for operator platform and machine table - Thread cutting without compensating chuck - Spindle orientation - Workpiece measuring probe (Renishaw MP3) - CE-compliant - Documentation complete There is no guarantee for correctness and completeness of the technical details and accessories.
            travel -x axis 8.200 mm
            travel -y axis 1.500 mm
            travel -z axis 1.250 mm
            Control HEIDENHAIN TNC 426 PB
            Description :
            Universal milling and boring machine in rigid bed design with movable
            column / Brand: AsquithButler / Type: Power Centre HPB
            Year of construction: 1999

            The machine can be inspected by appointment in the factory under power.

            Condition: Functional / ready for operation.

            Operating hours approx.:
            - Control on: 49.532 h
            - Machine on: 70.151 h
            - Program run: 24.706 h
            - Spindle runtime: 18.494 h

            TECHNICAL DATA:
            Travels:
            - X-axis (Longitudinal movement): 8.200 mm
            - Y-axis (Vertical movement): 1.500 mm
            - Z-axis (Cross movement): 1.250 mm

            Machine table:
            - Table dimensions: 10.000 x 1.000 mm
            - Number of T-slots: 6 x 22 mm
            - Table load: 5 t/m2

            Working spindle:
            - Spindle speed: 3.000 rpm
            - Spindle drive power: 30 kW
            - Spindle torque: 80 Nm
            - Spindle holder: HSK 100
            - Tool clamping: with disc springs
            - Release tool: hydraulic
            - Tool clamping force: 13.000 N

            Feeds / rapid traverse in all three axes (X,Y,Z):
            - Work feed: 1 - 20.000 mm/min
            - Rapid traverse: 20.000 mm/min
            - Feed force: 20.000 N

            Milling head automatically swivelling:
            - 45° version
            - Swivel range C-axis: 144 x 2,5°
            - Swivel range A-axis horizontal/vertical

            Automatic tool changer (chain magazine) ATC 60 horizontal and vertical:
            - Number of tool positions: 60
            - Tool length max.: 440 mm
            - Tool diameter max.: 120 mm
            - Tool diameter with free secondary stations max.: 200 mm
            - Tool weight max.: 25 kg
            - Tool recognition: Place coding

            Average tool changing time:
            - from chip to chip approx.: 28 sec

            Electrical connections:
            - complete 400 V, 50 Hz
            - Number of phases: 3
            - Phase current: 100 A
            - Earth wire: 50 A

            Air supply:
            - Air pressure: 6 bar
            - Capacity: 900 l/min
            Condition clean and pure

            EQUIPMENT:
            - Heidenhain CNC control: TNC 426 PB
            - All axes with roller guides
            - High-pressure cooling, Brand: KNOLL, Type: FVR 750
            Coolant through the spindle, 10 bar, 30 l/min
            Coolant via spray ring: 5 bar, 30 l/min
            complete with coolant tank, tank volume: 750 l,
            Centrifugal pump and filter system (0.025 mm)
            - Chip conveyor (slat-band conveyor)
            Longitudinal travel (X): 8.200 mm
            Ejection height above floor: 1.600 mm
            - Automatic hydraulic tool clamping
            - Ball screws in Y + Z axes, X-axis rack drive
            - Pendant control panel with CNC control and all operating elements
            for CNC and manual operation
            - Measuring systems (Heidenhain) for all axes
            - Digital-Siemens feed drives all axes
            - Feed rates and rapid traverse in all axes: 20.000 mm/min
            - Automatic central lubrication
            - Telescopic cover for the longitudinal axis
            - Electronic handwheel HR 410
            - Halogen machine light
            - Machine is equipped for pendulum machining with a partition wall for
            2 workstations, which can be removed if required.
            - Chip protection for operator platform and machine table
            - Thread cutting without compensating chuck
            - Spindle orientation
            - Workpiece measuring probe (Renishaw MP3)
            - CE-compliant
            - Documentation complete

            There is no guarantee for correctness and completeness of the technical details
            and accessories.

          Datasheet
          Request / Contact
          •   
          •   
          • 1  
          • 2  
          •   
          •   

            Trader Profile:   Isabelle Knops
          Vermittlung & Handel Von Wzm

          Contact Trader



            Isabelle Knops
          Vermittlung & Handel Von Wzm

           Opladener Str. 126
            40789 - Monheim am Rhein
            Deutschland
            +49 (0)2173-4999611">+49 (0)2173-4999611
            +49 (0)2173-8546560
            isabelle.knops@isabelleknops.com
            www.isabelleknops.com

          Profile of Trader

          Welcome to Isabelle Knops -
          Mediation & trade of machine tools.

          Active in the mediation and trade of machine tools since 2008.

          SELF-EMPLOYED SINCE AUGUST 2015.

          RELIABLE          IMAGINATIVE          CUSTOMER-ORIENTED

          Contact

          Isabelle Knops
          Vermittlung & Handel von Werkzeugmaschinen
          Opladener Str. 126
          40789 Monheim am Rhein
          Germany

          E-Mail: isabelle.knops@isabelleknops.com

          Telephone number: +49 (0)2173-4999611 
          Mobile phone number: +49 (0)173-282 0007 
          Fax: +49 (0)2173-8546560




          Isabelle Knops Vermittlung  &  Handel Von Wzm  40789 - Monheim am Rhein Opladener Str. 126 Deutschland
          Isabelle Knops Vermittlung & Handel Von Wzm

          Opladener Str. 126



          Contact Trader


            Isabelle Knops Vermittlung & Handel Von Wzm
           Opladener Str. 126
            40789 - Monheim am Rhein
            Deutschland
            +49 (0)2173-4999611
            +49 (0)2173-8546560
            isabelle.knops@isabelleknops.com
            www.isabelleknops.com
            Contact person:

           




          Machine category


          Bearbeitungszentrum - Universal · Bearbeitungszentrum - Vertikal · Bettfräsmaschine - Universal · CNC Dreh- und Fräszentrum · CNC Drehmaschine · Drahterodiermaschine · Drehmaschine - zyklengesteuert · Drehmaschine-konventionell-elektronisch · Fahrständerfräsmaschine · Karusselldrehmaschine - Doppelständer · Karusselldrehmaschine - Einständer · Koordinatenbohrmaschine · Krantraverse · Laserschneidmaschine · Lehrenbohrwerk - Horizontal · Plattenbohrwerk - Horizontal · Plattenbohrwerk - Traghülse · Plattenfeld · Portal - Bearbeitungszentrum · Portalfräswerk · Rohrsägeanlage · Schwerdrehmaschine · Spannmittel · Starrbettfräsmaschine · Tischbohrwerk ·