European network of stockholding machinery dealers

Bitte einen Suchbegriff eingeben - Please enter a search term
Category:
    Manufacturer:
      Machines:
        Trader:

          HANS - JÜRGEN GEIGER Maschinen-Vertrieb GmbH - Stockist for used machines

          Machinelist:


          Center Lathe

          used  Center Lathe WEILER Praktikant 160B


          • HANS - JÜRGEN GEIGER
          • James-Watt-Str. 12
          • 72555 Metzingen
          • Deutschland

          • (0049)-7123-18040
            (0049)-7123-18384
          • geiger@geiger-germany.com
            www.geiger-germany.com
          #1049-790133 · Center Lathe

          WEILER - Praktikant 160B - - 2001 -

          Technical details
          turning diameter over bed 160 mm︱turning diameter over slide rest 320 mm︱turning length 650 mm︱total power requirement 4,5 kW︱weight of the machine ca. 0,8 t︱dimensions of the machine ca. m︱
            turning diameter over bed 160 mm
            turning diameter over slide rest 320 mm
            turning length 650 mm
            total power requirement 4,5 kW
            weight of the machine ca. 0,8 t
          Datasheet
          Request / Contact
          used  Center Lathe VDF-BOEHRINGER M 670


          • HANS - JÜRGEN GEIGER
          • James-Watt-Str. 12
          • 72555 Metzingen
          • Deutschland

          • (0049)-7123-18040
            (0049)-7123-18384
          • geiger@geiger-germany.com
            www.geiger-germany.com
          #1049-764908 · Center Lathe

          VDF-BOEHRINGER - M 670 - - 1977 -

          Technical details
          turning diameter over bed 680 mm︱turning diameter over slide rest 415 mm︱turning length 2200 mm︱total power requirement 22 kW︱weight of the machine ca. 6,5 t︱dimensions of the machine ca. m︱
            turning diameter over bed 680 mm
            turning diameter over slide rest 415 mm
            turning length 2200 mm
            total power requirement 22 kW
            weight of the machine ca. 6,5 t
          Datasheet
          Request / Contact

          Chucking Automatic Lathe-Single Spindle

          used  Chucking Automatic Lathe-Single Spindle INDEX GS 30


          • HANS - JÜRGEN GEIGER
          • James-Watt-Str. 12
          • 72555 Metzingen
          • Deutschland

          • (0049)-7123-18040
            (0049)-7123-18384
          • geiger@geiger-germany.com
            www.geiger-germany.com
          #1049-453583 · Chucking Automatic Lathe-Single Spindle

          INDEX - GS 30 - - 1990 -

          Technical details
          turning diameter 60 mm︱turning length 200 mm︱number of slides ︱total power requirement 20 kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱
            turning diameter 60 mm
            turning length 200 mm
            total power requirement 20 kW
          Datasheet
          Request / Contact

          CNC Lathe

          used  CNC Lathe EMAG VSC 250 DS


          • HANS - JÜRGEN GEIGER
          • James-Watt-Str. 12
          • 72555 Metzingen
          • Deutschland

          • (0049)-7123-18040
            (0049)-7123-18384
          • geiger@geiger-germany.com
            www.geiger-germany.com
          #1049-706038 · CNC Lathe

          EMAG - VSC 250 DS - - 2004 - SIEMENS 840 D

          Technical details
          turning diameter 250 mm︱turning length 100 mm︱control SIEMENS 840 D ︱total power requirement 35 kW︱weight of the machine ca. 7500 kg︱dimensions of the machine ca. m︱
          E M A G (Germany) Vertical CNC Controlled Hard Turning and Grinding machine with tool turret and workpiece handling System Model VSC 250 DS Year 2004 # M7 28.69324 _______________________________________________________ Turning Ø, max. 250 mm Turning length internal / external 100 mm Workpiece length min./max. 29 – 100 mm 6-positon tool turret Ø / swing-Ø 480/790 mm Workpiece spindle Slide travel, X / Z / stroke 680 / 400 / 200 mm Feed rate / Quick feed X/Z 45/30 m/min. Feed force X/Z 5,5/11 kN Spindle speed 4.300 / 6.000 rpm Spindle drive 28 kW Total electrical load, approx. 35 kW - 400 V - 50 Hz Weight, approx. 7,500 kg Accessories / Special Features: * CNC – Continuous Path Control SIEMENS Model 840 D, with colour monitor, graphics, menu-supervised dialogue programming, and all the usual options, cycles and subprograms, etc. * Hexagon Tool turret head with 6 tool positions (Ø 40 mm) without motorized tools posts, two positions T 3 u. T 6 equipped with grinding spindles with 42.000 rpm and with 18.000 rpm, using CBN discs resp. regular grinding tools * Workpiece handling device with WP transportation frames and circulation system and pick-up and unloading of finished parts directly through the motor spindle which is equipped with a hydraulic 3 jaws chuck make SMW Autobloc with membrane clamping and clamping control system. * MARPOSS MIDA Measuring Probe for measuring blank parts a. the finished parts * NORGREN air measuring system, hydraulic weight compensation of spindle, * Main elements of machine are temperature stabilized by a coolant system made by HYFRA * Recooler for the grinding coolant sitting on a large Coolant device consisting of SEITZ Paper Band filter and a mobile Chipconveyor, Magnetic separator, Centrallubrication, etc. Vertical CNC lathes offer a thermo-resistant construction (chips do not fall onto the machine bed),fast workpiece change times (pick-up system through the main spindle) and a ridged tool arrangement,which also allows unrelated machining work, like hard turning or grinding process on the same machine. Condition : Good. Machine can soon be inspected under power. Delivery : Ex stock, as inspected. Payment : Net, after conclusion of contract.
            turning diameter 250 mm
            turning length 100 mm
            control SIEMENS 840 D
            total power requirement 35 kW
            weight of the machine ca. 7500 kg
            Description :
            E M A G (Germany)
            Vertical CNC Controlled Hard Turning and Grinding machine
            with tool turret and workpiece handling System
            Model VSC 250 DS Year 2004 # M7 28.69324
            _______________________________________________________

            Turning Ø, max. 250 mm
            Turning length internal / external 100 mm
            Workpiece length min./max. 29 – 100 mm

            6-positon tool turret Ø / swing-Ø 480/790 mm

            Workpiece spindle Slide travel, X / Z / stroke 680 / 400 / 200 mm
            Feed rate / Quick feed X/Z 45/30 m/min.
            Feed force X/Z 5,5/11 kN
            Spindle speed 4.300 / 6.000 rpm

            Spindle drive 28 kW
            Total electrical load, approx. 35 kW - 400 V - 50 Hz
            Weight, approx. 7,500 kg

            Accessories / Special Features:

            * CNC – Continuous Path Control SIEMENS Model 840 D, with colour monitor,
            graphics, menu-supervised dialogue programming, and all the usual
            options, cycles and subprograms, etc.
            * Hexagon Tool turret head with 6 tool positions (Ø 40 mm) without
            motorized tools posts, two positions T 3 u. T 6 equipped with grinding
            spindles with 42.000 rpm and with 18.000 rpm, using CBN discs resp.
            regular grinding tools
            * Workpiece handling device with WP transportation frames and circulation
            system and pick-up and unloading of finished parts directly through the
            motor spindle which is equipped with a hydraulic 3 jaws chuck make SMW
            Autobloc with membrane clamping and clamping control system.
            * MARPOSS MIDA Measuring Probe for measuring blank parts a. the
            finished parts
            * NORGREN air measuring system, hydraulic weight compensation of spindle,
            * Main elements of machine are temperature stabilized by a coolant system
            made by HYFRA
            * Recooler for the grinding coolant sitting on a large Coolant device
            consisting of SEITZ Paper Band filter and a mobile Chipconveyor,
            Magnetic separator, Centrallubrication, etc.

            Vertical CNC lathes offer a thermo-resistant construction (chips do not fall
            onto the machine bed),fast workpiece change times (pick-up system through
            the main spindle) and a ridged tool arrangement,which also allows unrelated
            machining work, like hard turning or grinding process on the same machine.

            Condition : Good. Machine can soon be inspected under power.
            Delivery : Ex stock, as inspected.
            Payment : Net, after conclusion of contract.

          Datasheet
          Request / Contact
          used  CNC Lathe INDEX G 200


          • HANS - JÜRGEN GEIGER
          • James-Watt-Str. 12
          • 72555 Metzingen
          • Deutschland

          • (0049)-7123-18040
            (0049)-7123-18384
          • geiger@geiger-germany.com
            www.geiger-germany.com
          #1049-705010 · CNC Lathe

          INDEX - G 200 - - 1998 - SIEMENS SINUMERIC 840 C

          Technical details
          turning diameter 200 mm︱turning length 400 mm︱control SIEMENS SINUMERIC 840 C ︱total power requirement 40 kW︱weight of the machine ca. 6.500 kg︱dimensions of the machine ca. m︱
            turning diameter 200 mm
            turning length 400 mm
            control SIEMENS SINUMERIC 840 C
            total power requirement 40 kW
            weight of the machine ca. 6.500 kg
          Datasheet
          Request / Contact
          used  CNC Lathe INDEX G 300


          • HANS - JÜRGEN GEIGER
          • James-Watt-Str. 12
          • 72555 Metzingen
          • Deutschland

          • (0049)-7123-18040
            (0049)-7123-18384
          • geiger@geiger-germany.com
            www.geiger-germany.com
          #1049-766392 · CNC Lathe

          INDEX - G 300 - - 1995 - SIEMENS SINUMERIC 840

          Technical details
          turning diameter 300 mm︱turning length 710 mm︱control SIEMENS SINUMERIC 840 ︱total power requirement 40 kW︱weight of the machine ca. 6000 kg︱dimensions of the machine ca. m︱
          I N D E X (Germany) CNC Controlled Slant-Bed Chuck Lathe with Turret and Tailstock and INDEX CNC Control C 200 – 4 (SIEMENS) Model G 300 Year 1995 S/N 5000 65 _____________________________________________________________ Turning - Ø, with chuck, max. 300 mm Spindle bore 90 mm Max. Workpiece Swing dia. 400 / 590 mm Turning length / travel of turning slide, (X-Achse) max. 710 mm Turret head slide cross movement (Z-Axis) max. 140 mm Turret with 12 tool holder positions DIN 30 mm Feed range of turret slide / Quickfeed 0,1 - 20 m/Min. Feed Force of X/Z-Axis 8 – 13 kN Steplessly adjustable Spindle speeds up to 5.000 rpm Torque Forceon main spindle approx. 275 Nm Spindle drive 28 kW Total electrical load appr. 40 kW - 400 V - 50 Hz Weight 6,000 kg Accessories / Special Features: * INDEX CNC Control Model C 200-4 resp. SIEMENS 840 C for 3 Axes X/Z Axis and Main spindle as C-Axis (Spindle Orientation) Control Panel mounted swivable on front left side of machine. * Spindle orientation in 2,5° degree steps and Spindle indexing device * Mounted hydraulic 3 Jaws Chuck make FORKHARDT Model HS 250 with many Sets of jaws. Speed up to 5.000 rpm * INDEX- Turret with 12 positions for DIN 30 tool holders, prepared for driven tools and motorized by the indexing motor, Choice of approx. 40 pieces toolholders * Hydraulic Tailstock with stroke of 50 mm and with concentricity correction device * KNOLL – Swarf Conveyor with Coolant Device and High Pressure Pump, Sliding door, Oilskimmer, etc. Condition : Good to very good. Machine can be inspected under power. Delivery : Ex stock, as inspected. Payment : Net, after conclusion of contract.
            turning diameter 300 mm
            turning length 710 mm
            control SIEMENS SINUMERIC 840
            total power requirement 40 kW
            weight of the machine ca. 6000 kg
            Description :
            I N D E X (Germany)
            CNC Controlled Slant-Bed Chuck Lathe with Turret and Tailstock
            and INDEX CNC Control C 200 – 4 (SIEMENS)
            Model G 300 Year 1995 S/N 5000 65
            _____________________________________________________________

            Turning - Ø, with chuck, max. 300 mm
            Spindle bore 90 mm

            Max. Workpiece Swing dia. 400 / 590 mm

            Turning length / travel of turning slide, (X-Achse) max. 710 mm
            Turret head slide cross movement (Z-Axis) max. 140 mm

            Turret with 12 tool holder positions DIN 30 mm
            Feed range of turret slide / Quickfeed 0,1 - 20 m/Min.
            Feed Force of X/Z-Axis 8 – 13 kN

            Steplessly adjustable Spindle speeds up to 5.000 rpm
            Torque Forceon main spindle approx. 275 Nm

            Spindle drive 28 kW
            Total electrical load appr. 40 kW - 400 V - 50 Hz
            Weight 6,000 kg

            Accessories / Special Features:

            * INDEX CNC Control Model C 200-4 resp. SIEMENS 840 C for 3 Axes
            X/Z Axis and Main spindle as C-Axis (Spindle Orientation) Control Panel
            mounted swivable on front left side of machine.
            * Spindle orientation in 2,5° degree steps and Spindle indexing device
            * Mounted hydraulic 3 Jaws Chuck make FORKHARDT Model HS 250 with many
            Sets of jaws. Speed up to 5.000 rpm
            * INDEX- Turret with 12 positions for DIN 30 tool holders, prepared for
            driven tools and motorized by the indexing motor, Choice of approx.
            40 pieces toolholders
            * Hydraulic Tailstock with stroke of 50 mm and with concentricity
            correction device
            * KNOLL – Swarf Conveyor with Coolant Device and High Pressure Pump,
            Sliding door, Oilskimmer, etc.

            Condition : Good to very good. Machine can be inspected under power.
            Delivery : Ex stock, as inspected.
            Payment : Net, after conclusion of contract.

          Datasheet
          Request / Contact
          used  CNC Lathe INDEX GSC 65


          • HANS - JÜRGEN GEIGER
          • James-Watt-Str. 12
          • 72555 Metzingen
          • Deutschland

          • (0049)-7123-18040
            (0049)-7123-18384
          • geiger@geiger-germany.com
            www.geiger-germany.com
          #1049-279545 · CNC Lathe

          INDEX - GSC 65 - - 1991 - C 200 / 8

          Technical details
          turning diameter 250 mm︱turning length 400 mm︱control C 200 / 8 ︱total power requirement 60 kW︱weight of the machine ca. 8,5 t︱
          Swing Ø above bed, max. 300 mm Max. turning Ø for chucking work, approx. 250 mm Travel of Slides: Turret 1, X / Z travel 163 / 550 mm Turret 2, X / Z / Y travel 140 / 250 / 260 mm Spindle bore, approx. 65 mm Tool holder bore 30 mm Spindle speeds 25 - 5,000 rpm Feed range 0 - 15,000 rpm Spindle drive 0.5 - 40 kW Total electrical load 60 kW - 380 V - 50 Hz Weight, approx. 8,500 kg Accessories / Special Features * SIEMENS CNC Continuous Path Control, Model 880 (INDEX C 200-8) for at least 6 axes, with enlarged memory and with subprograms, simulation, etc. * Double column loading device for large workpieces, mounted above the machine. With 3-jaw gripper and storage system for blanks and finished parts, integrated in the CNC control. * Spindle indexing and positioning device, 7.5°. * Hydraulic high-power chuck (hollow clamping cylinder Ø 65 mm). Manufacturer: ROHM, Model HS 200/3-66, and ROHM Power Chuck, Model KFD HS 137 in the opposed spindle. * Driven tools in Turrets 1, 2 and 3, drive approx. 6 kW each. Tool stations: 8 / 12 / 8 + 28 tools in magazine = 55 tools altogether. * Tool measuring device for Turret 1. * Tool disk magazine for Revolver No. 2 with 28 tool positions and automatic tool changer. * Backwork is possible using the control unit for the 3rd turret. * Coolant device with large chip conveyor. * Automatic sliding doors. * Various other accessories. Price, ex stock EUR 49,000.-- Ideal machine for heavy and complex turned parts. Complete processing is possible, including backwork. Condition : Good to very good. Machine can be inspected under power. Delivery : Ex stock as inspected Payment : Net, after conclusion of contract Thank you for your interest. We have a selection of CNC lathes available. Please let us know your requirements
            turning diameter 250 mm
            turning length 400 mm
            control C 200 / 8
            total power requirement 60 kW
            weight of the machine ca. 8,5 t
            Description :
            Swing Ø above bed, max. 300 mm
            Max. turning Ø for chucking work, approx. 250 mm

            Travel of Slides:
            Turret 1, X / Z travel 163 / 550 mm
            Turret 2, X / Z / Y travel 140 / 250 / 260 mm

            Spindle bore, approx. 65 mm
            Tool holder bore 30 mm

            Spindle speeds 25 - 5,000 rpm
            Feed range 0 - 15,000 rpm

            Spindle drive 0.5 - 40 kW
            Total electrical load 60 kW - 380 V - 50 Hz
            Weight, approx. 8,500 kg

            Accessories / Special Features
            * SIEMENS CNC Continuous Path Control, Model 880 (INDEX C 200-8) for at least 6 axes, with enlarged memory and with subprograms, simulation, etc.
            * Double column loading device for large workpieces, mounted above the machine. With 3-jaw gripper and storage system for blanks and finished parts, integrated in the CNC control.
            * Spindle indexing and positioning device, 7.5°.
            * Hydraulic high-power chuck (hollow clamping cylinder Ø 65 mm). Manufacturer: ROHM, Model HS 200/3-66, and ROHM Power Chuck, Model KFD HS 137 in the opposed spindle.
            * Driven tools in Turrets 1, 2 and 3, drive approx. 6 kW each. Tool stations: 8 / 12 / 8 + 28 tools in magazine = 55 tools altogether.
            * Tool measuring device for Turret 1.
            * Tool disk magazine for Revolver No. 2 with 28 tool positions and automatic tool changer.
            * Backwork is possible using the control unit for the 3rd turret.
            * Coolant device with large chip conveyor. * Automatic sliding doors.
            * Various other accessories.

            Price, ex stock EUR 49,000.--

            Ideal machine for heavy and complex turned parts. Complete processing is possible, including backwork.

            Condition : Good to very good. Machine can be inspected under power.
            Delivery : Ex stock as inspected
            Payment : Net, after conclusion of contract

            Thank you for your interest.
            We have a selection of CNC lathes available. Please let us know your requirements
          Datasheet
          Request / Contact
          used  CNC Lathe GILDEMEISTER GAC 42


          • HANS - JÜRGEN GEIGER
          • James-Watt-Str. 12
          • 72555 Metzingen
          • Deutschland

          • (0049)-7123-18040
            (0049)-7123-18384
          • geiger@geiger-germany.com
            www.geiger-germany.com
          #1049-333531 · CNC Lathe

          GILDEMEISTER - GAC 42 - - 1991 -

          Technical details
          turning diameter 42 mm︱turning length 250 mm︱control ︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱
          CNC-lathe with bar feed with Sameca bar feed
            turning diameter 42 mm
            turning length 250 mm
            Description :
            CNC-lathe with bar feed
            with Sameca bar feed
          Datasheet
          Request / Contact
          used  CNC Lathe TRAUB TNS 65/ 80 D


          • HANS - JÜRGEN GEIGER
          • James-Watt-Str. 12
          • 72555 Metzingen
          • Deutschland

          • (0049)-7123-18040
            (0049)-7123-18384
          • geiger@geiger-germany.com
            www.geiger-germany.com
          #1049-346509 · CNC Lathe

          TRAUB - TNS 65/ 80 D - - 1990 - TX8D

          Technical details
          turning diameter 250 mm︱turning length 450 mm︱control TX8D ︱bore 80 mm︱spindle speed: 3150 U/min.︱
          CNC Lathe with Bar Feed and 3 Turrets Very large spindle bore, with bar loading device Please ask for further details.
            turning diameter 250 mm
            turning length 450 mm
            control TX8D
            bore 80 mm
            spindle speed: 3150 U/min.
            Description :
            CNC Lathe with Bar Feed and 3 Turrets
            Very large spindle bore, with bar loading device

            Please ask for further details.
          Datasheet
          Request / Contact

          CNC-Vertical Turret Lathe - Single Col.

          used  CNC-Vertical Turret Lathe - Single Col. PITTLER PV 1250 1-1


          • HANS - JÜRGEN GEIGER
          • James-Watt-Str. 12
          • 72555 Metzingen
          • Deutschland

          • (0049)-7123-18040
            (0049)-7123-18384
          • geiger@geiger-germany.com
            www.geiger-germany.com
          #1049-447347 · CNC-Vertical Turret Lathe - Single Col.

          PITTLER - PV 1250 1-1 - - 1994 -

          Technical details
          turning diameter 1250 mm︱swing diameter 1160 mm︱turning height 800 mm︱faceplate diameter 1000 mm︱total power requirement 97 kW︱weight of the machine ca. 25000 t︱dimensions of the machine ca. m︱
          P I T T L E R (Germany) CNC Controlled Vertical Turning and Milling Centre With Tool Changer and Pallet Changer Model PV 1250 / 1-1 Year 1994 _______________________________________________________ Turning Ø max. 1,000 mm Swing Ø max. 1,160 mm Turning length 800 mm X Axis - horizontal 1,300 mm Y Axis - vertical 800 mm Feed / quick feed 16,000 mm/min Main spindle speeds 10 - 1,000 rpm ! Main spindle speeds via separate C Axis 0.1 - 16 rpm Positioning accuracy of C Axis 360° + / - 5 " Tool holder ISO 50 Tool drive 22 kW Max. torque / spindle speed 315 Nm / 2,500 rpm Pallet size 630 x 630 mm Spindle drive 63 kW Total electrical load 97 kW - 400 V - 50 Hz Weight, approx. 25,000 kg Accessories / Special Features * CNC Contouring Control Model NUM 760 TX in 3 axes, with graphics, menu-guided dialogue programming, and all the usual options, cycles and sub-programs; with tool compensation, thread cutting cycles, constant speed programming, etc. * 2-axis CNC tool slide (1,300 x 800 mm) with driven tool holders, ISA 50 / 22 kW. * Tool changer with 16 tool holders, max. length 450 mm, max. weight 40 kg. * Pallet changing system, pallet size 630 x 630 mm, with setup station with indexing and drive of the pallet, and 2 separate pallet stations. * 3 pallets, 630 x 630 mm. * 3-jaw chuck, Ø 650 mm. * Face plate, Ø 900 mm. * Chip conveyor. * Band filter coolant equipment. * Completely covered working area, including safety fence for the pallet changing area. * Separate switch cabinet. * Operating manual. * Approx. 20 tool holders. * Various other accessories. High performance universal turning and milling centre for full range of machining (turning, boring, drilling, milling, and threading) with high speeds and high turning volume. Condition : Good to very good. Machine can soon be inspected under power. Delivery : Ex stock as inspected Payment : Net, after conclusion of contract Thank you for your interest. We have a selection of modern lathes available. Please let us know your requirements
            turning diameter 1250 mm
            swing diameter 1160 mm
            turning height 800 mm
            faceplate diameter 1000 mm
            total power requirement 97 kW
            weight of the machine ca. 25000 t
            Description :
            P I T T L E R (Germany)
            CNC Controlled Vertical Turning and Milling Centre
            With Tool Changer and Pallet Changer
            Model PV 1250 / 1-1 Year 1994
            _______________________________________________________
            Turning Ø max. 1,000 mm
            Swing Ø max. 1,160 mm
            Turning length 800 mm

            X Axis - horizontal 1,300 mm
            Y Axis - vertical 800 mm
            Feed / quick feed 16,000 mm/min

            Main spindle speeds 10 - 1,000 rpm !
            Main spindle speeds via separate C Axis 0.1 - 16 rpm
            Positioning accuracy of C Axis 360° + / - 5 "

            Tool holder ISO 50
            Tool drive 22 kW
            Max. torque / spindle speed 315 Nm / 2,500 rpm

            Pallet size 630 x 630 mm

            Spindle drive 63 kW
            Total electrical load 97 kW - 400 V - 50 Hz
            Weight, approx. 25,000 kg

            Accessories / Special Features
            * CNC Contouring Control Model NUM 760 TX in 3 axes, with graphics, menu-guided dialogue programming, and all the usual options, cycles and sub-programs; with tool compensation, thread cutting cycles, constant speed programming, etc.
            * 2-axis CNC tool slide (1,300 x 800 mm) with driven tool holders, ISA 50 / 22 kW.
            * Tool changer with 16 tool holders, max. length 450 mm, max. weight 40 kg.
            * Pallet changing system, pallet size 630 x 630 mm, with setup station with indexing and drive of the pallet, and 2 separate pallet stations.
            * 3 pallets, 630 x 630 mm. * 3-jaw chuck, Ø 650 mm. * Face plate, Ø 900 mm.
            * Chip conveyor. * Band filter coolant equipment. * Completely covered working area, including safety fence for the pallet changing area. * Separate switch cabinet. * Operating manual.
            * Approx. 20 tool holders. * Various other accessories.


            High performance universal turning and milling centre for full range of machining (turning, boring, drilling, milling, and threading) with high speeds and high turning volume.

            Condition : Good to very good. Machine can soon be inspected under power.
            Delivery : Ex stock as inspected
            Payment : Net, after conclusion of contract

            Thank you for your interest.
            We have a selection of modern lathes available. Please let us know your requirements

          Datasheet
          Request / Contact

          Facing Lathe

          used  Facing Lathe RAVENSBURG K 900 KH


          • HANS - JÜRGEN GEIGER
          • James-Watt-Str. 12
          • 72555 Metzingen
          • Deutschland

          • (0049)-7123-18040
            (0049)-7123-18384
          • geiger@geiger-germany.com
            www.geiger-germany.com
          #1049-18011 · Facing Lathe

          RAVENSBURG - K 900 KH - - 1966 -

          Technical details
          faceplate diameter 0 mm︱turning diameter over slide rest 900 mm︱turning length 1.000 mm︱total power requirement 25 kW︱weight of the machine ca. 8 t︱dimensions of the machine ca. m︱
          Height of centres 550 mm Max. turning Æ 1200 mm Max. turning Æ over slides, approx. 900 mm Max. turning length, approx. 1000 mm Spindle bore, approx. 90 mm 24 spindle speeds 4.3 - 587 rpm Feeds, infinitely variable 1 - 170 mm/min Total load, approx. 25 kW - 380 V - 50 Hz Weight, approx. 8000 kg Accessories/specialities Two separate slides, each equipped with 2-coordinate copying equipment, program controlled by plugboard, strengthened bearings and spindle, hardened and ground guideways, FORKHARDT 3-jaw chuck/ face plate, separate switch cabinet and cooling equipment. This machine is suitable for complicated, high precision copying of heavy workpieces.
            turning diameter over slide rest 900 mm
            turning length 1.000 mm
            total power requirement 25 kW
            weight of the machine ca. 8 t
            Description :
            Height of centres 550 mm
            Max. turning Æ 1200 mm
            Max. turning Æ over slides, approx. 900 mm
            Max. turning length, approx. 1000 mm
            Spindle bore, approx. 90 mm
            24 spindle speeds 4.3 - 587 rpm
            Feeds, infinitely variable 1 - 170 mm/min
            Total load, approx. 25 kW - 380 V - 50 Hz
            Weight, approx. 8000 kg

            Accessories/specialities
            Two separate slides, each equipped with 2-coordinate copying
            equipment, program controlled by plugboard, strengthened bearings
            and spindle, hardened and ground guideways, FORKHARDT 3-jaw chuck/
            face plate, separate switch cabinet and cooling equipment.
            This machine is suitable for complicated, high precision copying
            of heavy workpieces.
          Datasheet
          Request / Contact

          Lathe - cycle-controlled

          used  Lathe -  cycle-controlled GILDEMEISTER NEF 520


          • HANS - JÜRGEN GEIGER
          • James-Watt-Str. 12
          • 72555 Metzingen
          • Deutschland

          • (0049)-7123-18040
            (0049)-7123-18384
          • geiger@geiger-germany.com
            www.geiger-germany.com
          #1049-791318 · Lathe - cycle-controlled

          GILDEMEISTER - NEF 520 - - 1999 -

          Technical details
          turning diameter over bed 500 mm︱turning diameter over slide rest 1150 mm︱turning length 1040 mm︱Control ︱total power requirement 12 kW︱weight of the machine ca. 3 t︱dimensions of the machine ca. m︱
            turning diameter over bed 500 mm
            turning diameter over slide rest 1150 mm
            turning length 1040 mm
            total power requirement 12 kW
            weight of the machine ca. 3 t
          Datasheet
          Request / Contact
          used  Lathe -  cycle-controlled SOMAB UNIMAB 400


          • HANS - JÜRGEN GEIGER
          • James-Watt-Str. 12
          • 72555 Metzingen
          • Deutschland

          • (0049)-7123-18040
            (0049)-7123-18384
          • geiger@geiger-germany.com
            www.geiger-germany.com
          #1049-695990 · Lathe - cycle-controlled

          SOMAB - UNIMAB 400 - - 1996 - NUM Type 1062 T

          Technical details
          turning diameter 400 mm︱turning length 915 mm︱control NUM Type 1062 T ︱total power requirement 12,5 kW︱weight of the machine ca. 5500 kg︱dimensions of the machine ca. m︱
            turning diameter 400 mm
            turning length 915 mm
            control NUM Type 1062 T
            total power requirement 12,5 kW
            weight of the machine ca. 5500 kg
          Datasheet
          Request / Contact

          Turning Automatic Lathe - swiss lathe

          used  Turning Automatic Lathe - swiss lathe TORNOS SIGMA 8


          • HANS - JÜRGEN GEIGER
          • James-Watt-Str. 12
          • 72555 Metzingen
          • Deutschland

          • (0049)-7123-18040
            (0049)-7123-18384
          • geiger@geiger-germany.com
            www.geiger-germany.com
          #1049-785647 · Turning Automatic Lathe - swiss lathe

          TORNOS - SIGMA 8 - - 2007 -

          Technical details
          turning diameter over bed 20 mm︱spindle passage 20 mm︱turning length 200 mm︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱
            turning diameter over bed 20 mm
            spindle passage 20 mm
            turning length 200 mm
          Datasheet
          Request / Contact
          used  Turning Automatic Lathe - swiss lathe TORNOS ENC 264


          • HANS - JÜRGEN GEIGER
          • James-Watt-Str. 12
          • 72555 Metzingen
          • Deutschland

          • (0049)-7123-18040
            (0049)-7123-18384
          • geiger@geiger-germany.com
            www.geiger-germany.com
          #1049-353545 · Turning Automatic Lathe - swiss lathe

          TORNOS - ENC 264 - - 1995 -

          Technical details
          turning diameter over bed 50 mm︱spindle passage 26 mm︱turning length 275 mm︱total power requirement 12 kW︱weight of the machine ca. 4500 kg︱
          CNC-Sliding Headstock Lathe, Opposite Headstock
            turning diameter over bed 50 mm
            spindle passage 26 mm
            turning length 275 mm
            total power requirement 12 kW
            weight of the machine ca. 4500 kg
            Description :
            CNC-Sliding Headstock Lathe, Opposite Headstock
          Datasheet
          Request / Contact

          Deephole Boring Machine

          used  Deephole Boring Machine TBT BWP 250


          • HANS - JÜRGEN GEIGER
          • James-Watt-Str. 12
          • 72555 Metzingen
          • Deutschland

          • (0049)-7123-18040
            (0049)-7123-18384
          • geiger@geiger-germany.com
            www.geiger-germany.com
          #1049-410847 · Deephole Boring Machine

          TBT - BWP 250 - - 1996 -

          Technical details
          core drilling diameter max. 25 mm︱bore depth 1000 mm︱swing diameter mm︱total power requirement 25 kW︱weight of the machine ca. 12,5 t︱dimensions of the machine ca. m︱
          T B T (Germany) CNC-Controlled Horizontal Deep Hole Drilling " Centre " Model BWP 250 Year 1996, but reconditioned mechanically and electrically in 2006 ___________________________________________________________________________________ Working range: X Axis, machine column cross 2,000 mm Z Axis, drilling slide horizontal 1,200 mm Drilling depth 1.000 mm Y Axis, drilling slide vertical 1,100 mm Table clamping area 1,200 x 2,000 mm Drilling capacity in solid material, approx. 4 - 25 mm Tool holder taper HSK 50 Spindle speeds 1.260 - 15,000 rpm Feed rates / quickfeed, XYZ, infinitely variable 100 - 10,000/15.000 mm/min. Force rate of feed motors 27 Nm / 1.000 daN Spindle drive steplessly adjustable 7 kW Total electrical load, approx. 30 kW - 400 V - 50 Hz Weight, approx. 10,000 kg Accessories / Special Features: " Ideal machine for the complete processing of large workpieces like tool a. dies (cooling holes) mould- and dieplates, hydraulicparts etc. by means of deep hole drilling up to 25 x 1.000 mm, face milling up to Ø 60 mm, spiral twist drilling, counterboring and threading up to M 24 x 3 mm. " SIEMENS Continuous Path Control in 4 axes Model 840 D, with process monitoring for coolant pressure, operation data control function, toollife, feed force,Error diagnostics and easy dialogueprogramming directly on the panel, etc. " High Frequency Spindle Make GAMFIOR with stepless speeds " Hydraulically movable drill bush carrier, swivels 90° for holding gun drills (ELB) or picking up regular tools from the tool changer like twist drills, milling tools, taps, etc. " With automatic tool changer made by MIKSCH, Model CTM 40, using a 12-position tool changer, which is mounted on the r.h.side of machine housing, in fixed position, only moving forward and backward for tool changing operation. " Built-on indexing table as B-Axis made by FIBRO Model RTN 400 = 420 x 420 mm, " Extra Rotary Table made by FIBRO with Ø 1.000mm, for indexing 3-144 positions " Built-in coolant device with chip conveyor and various filters. " 2 steady rests. " Completely covered working area with access at the front and at the side. Condition : Very good condition. This is a rare and valuable machine. Under Power Delivery : immediately ex our Stock Payment : Net, after conclusion of contract.
            core drilling diameter max. 25 mm
            bore depth 1000 mm
            total power requirement 25 kW
            weight of the machine ca. 12,5 t
            Description :
            T B T (Germany)
            CNC-Controlled Horizontal Deep Hole Drilling " Centre "
            Model BWP 250
            Year 1996, but reconditioned mechanically and electrically in 2006
            ___________________________________________________________________________________

            Working range: X Axis, machine column cross 2,000 mm
            Z Axis, drilling slide horizontal 1,200 mm
            Drilling depth 1.000 mm
            Y Axis, drilling slide vertical 1,100 mm

            Table clamping area 1,200 x 2,000 mm

            Drilling capacity in solid material, approx. 4 - 25 mm
            Tool holder taper HSK 50
            Spindle speeds 1.260 - 15,000 rpm

            Feed rates / quickfeed, XYZ,
            infinitely variable 100 - 10,000/15.000 mm/min.
            Force rate of feed motors 27 Nm / 1.000 daN

            Spindle drive steplessly adjustable 7 kW
            Total electrical load, approx. 30 kW - 400 V - 50 Hz
            Weight, approx. 10,000 kg

            Accessories / Special Features:

            " Ideal machine for the complete processing of large workpieces like tool a. dies (cooling holes) mould- and dieplates, hydraulicparts etc. by means of deep hole drilling up to 25 x 1.000 mm, face milling up to Ø 60 mm, spiral twist drilling, counterboring and threading up to M 24 x 3 mm.
            " SIEMENS Continuous Path Control in 4 axes Model 840 D, with process monitoring for coolant pressure, operation data control function, toollife, feed force,Error diagnostics and easy dialogueprogramming directly on the panel, etc.
            " High Frequency Spindle Make GAMFIOR with stepless speeds
            " Hydraulically movable drill bush carrier, swivels 90° for holding gun drills (ELB) or picking up regular tools from the tool changer like twist drills, milling tools, taps, etc.
            " With automatic tool changer made by MIKSCH, Model CTM 40, using a 12-position tool changer, which is mounted on the r.h.side of machine housing, in fixed position, only moving forward and backward for tool changing operation.
            " Built-on indexing table as B-Axis made by FIBRO Model RTN 400 = 420 x 420 mm,
            " Extra Rotary Table made by FIBRO with Ø 1.000mm, for indexing 3-144 positions
            " Built-in coolant device with chip conveyor and various filters.
            " 2 steady rests.
            " Completely covered working area with access at the front and at the side.

            Condition : Very good condition. This is a rare and valuable machine. Under Power
            Delivery : immediately ex our Stock
            Payment : Net, after conclusion of contract.
          Datasheet
          Request / Contact
          used  Deephole Boring Machine TBT M 320-2-1200


          • HANS - JÜRGEN GEIGER
          • James-Watt-Str. 12
          • 72555 Metzingen
          • Deutschland

          • (0049)-7123-18040
            (0049)-7123-18384
          • geiger@geiger-germany.com
            www.geiger-germany.com
          #1049-776778 · Deephole Boring Machine

          TBT - M 320-2-1200 - - 1993 -

          Technical details
          core drilling diameter max. 25 mm︱bore depth 1200 mm︱swing diameter 160 mm︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱
            core drilling diameter max. 25 mm
            bore depth 1200 mm
            swing diameter 160 mm
          Datasheet
          Request / Contact
          used  Deephole Boring Machine TBT HS 1-350


          • HANS - JÜRGEN GEIGER
          • James-Watt-Str. 12
          • 72555 Metzingen
          • Deutschland

          • (0049)-7123-18040
            (0049)-7123-18384
          • geiger@geiger-germany.com
            www.geiger-germany.com
          #1049-469994 · Deephole Boring Machine

          TBT - HS 1-350 - - 1990 -

          Technical details
          core drilling diameter max. 6 mm︱bore depth 350 mm︱swing diameter mm︱total power requirement 15 kW︱weight of the machine ca. 3500 kg︱dimensions of the machine ca. 5000 x 1200 x 2200 mm︱
            core drilling diameter max. 6 mm
            bore depth 350 mm
            total power requirement 15 kW
            weight of the machine ca. 3500 kg
            dimensions of the machine ca. 5000 x 1200 x 2200 mm
          Datasheet
          Request / Contact
          used  Deephole Boring Machine GILDEMEISTER & KNOLL 2 M 01-2-320


          • HANS - JÜRGEN GEIGER
          • James-Watt-Str. 12
          • 72555 Metzingen
          • Deutschland

          • (0049)-7123-18040
            (0049)-7123-18384
          • geiger@geiger-germany.com
            www.geiger-germany.com
          #1049-402623 · Deephole Boring Machine

          GILDEMEISTER & KNOLL - 2 M 01-2-320 - - 1985 -

          Technical details
          core drilling diameter max. 18 mm︱bore depth 320 mm︱swing diameter mm︱total power requirement 33 kW︱weight of the machine ca. 6 t︱dimensions of the machine ca. m︱
            core drilling diameter max. 18 mm
            bore depth 320 mm
            total power requirement 33 kW
            weight of the machine ca. 6 t
          Datasheet
          Request / Contact
          used  Deephole Boring Machine SIG B 30 /16


          • HANS - JÜRGEN GEIGER
          • James-Watt-Str. 12
          • 72555 Metzingen
          • Deutschland

          • (0049)-7123-18040
            (0049)-7123-18384
          • geiger@geiger-germany.com
            www.geiger-germany.com
          #1049-382093 · Deephole Boring Machine

          SIG - B 30 /16 - - 1965 -

          Technical details
          core drilling diameter max. 50 mm︱bore depth 2000 mm︱swing diameter mm︱drilling capacity diameter max. 110 mm︱total power requirement 30 kW︱weight of the machine ca. 10 t︱
          Drilling Ø, approx. 2 - 50 mm Boring Ø, approx. 100 mm Drilling depth, max. (see stroke / mounting length) 1,600 - 2,000 mm Stroke of drilling slide, approx. 4,000 mm Distance between the two spindle heads 5,000 mm Height of centres above guideways 350 / 450 mm Drilling feed of drilling slide, infinitely variable 20 - 200 mm/min Quick feed of drilling slide 2,500 mm/min Spindle speeds via belt disks 260 - 650 / 650 - 1,625 rpm Workspindle drive 24 kW Drive of coolant pumps 1 x 7.5/15 kW and 1 x 15/28 kW Total electrical load, approx. 60 kW - 380 V - 50 Hz Total length of machine / guideways 7,500 / 5,000 mm Weight, approx. 10,000 kg Accessories / Special Features * Machine consists of the following elements: Main spindle on the left-hand side, followed by the coolant oil supply device. Table group, driven by ball screw spindle. Coolant oil supply device with elevated height of centres. At the end is a headstock, Type B 16, with drive motor approx. 7.5 kW, n = 900/2400 and 2400/6000. Large coolant device with filter unit. Large selection of accessories and drilling tools with Ø up to 100 mm. * Machine is suitable for working with a rotating workpiece together with a fixed drilling tool (ELB and BTA Process), as well as for a fixed workpiece and a rotating drilling tool. It can work with internal oil feed (Elb) or with external oil feed (BTA). * Complete oil coolant unit with tank and filter and two SIG high pressure pumps. Number of litres can be set: 17 / 40 / 120 or 220 / 500 litres per minute. Capacity approx. 2,500 l. * Feed of main slide is via ball screw spindle and infinitely variable DC motor. Mounted on the main slide is at present a table, approx. 800 x 800 mm, cross-adjustable approx. 500 mm, and suitable for holding cubic and cylindrical workpieces. Electric control via cam rail, approx. 2,500 mm long. End switch for quick feed, feed and return. * 2 closed 3-point steady rests. * FORKHARDT 3-Jaw Chuck, manually operated, Ø approx. 315 mm. * Modernized control panel with speed display, feed setting and display, display for kW, switch for feed, quick feed, right/left, etc. * 2 separate switch cabinets, separate coolant oil display device, bushes, reducers, clamping helps and lots of other accessories. This is a very valuable machine because of all the accessories!
            core drilling diameter max. 50 mm
            bore depth 2000 mm
            drilling capacity diameter max. 110 mm
            total power requirement 30 kW
            weight of the machine ca. 10 t
            Description :
            Drilling Ø, approx. 2 - 50 mm
            Boring Ø, approx. 100 mm
            Drilling depth, max. (see stroke / mounting length) 1,600 - 2,000 mm
            Stroke of drilling slide, approx. 4,000 mm
            Distance between the two spindle heads 5,000 mm
            Height of centres above guideways 350 / 450 mm

            Drilling feed of drilling slide, infinitely variable 20 - 200 mm/min
            Quick feed of drilling slide 2,500 mm/min
            Spindle speeds via belt disks 260 - 650 / 650 - 1,625 rpm

            Workspindle drive 24 kW
            Drive of coolant pumps 1 x 7.5/15 kW and 1 x 15/28 kW
            Total electrical load, approx. 60 kW - 380 V - 50 Hz
            Total length of machine / guideways 7,500 / 5,000 mm
            Weight, approx. 10,000 kg

            Accessories / Special Features
            * Machine consists of the following elements:
            Main spindle on the left-hand side, followed by the coolant oil supply device. Table group, driven by ball screw
            spindle. Coolant oil supply device with elevated height of centres. At the end is a headstock, Type B 16, with
            drive motor approx. 7.5 kW, n = 900/2400 and 2400/6000. Large coolant device with filter unit. Large selection
            of accessories and drilling tools with Ø up to 100 mm.
            * Machine is suitable for working with a rotating workpiece together with a fixed drilling tool (ELB and BTA Process), as well as for a fixed workpiece and a rotating drilling tool. It can work with internal oil feed (Elb) or with external oil feed (BTA).
            * Complete oil coolant unit with tank and filter and two SIG high pressure pumps. Number of litres can be set: 17 / 40 / 120 or 220 / 500 litres per minute. Capacity approx. 2,500 l.
            * Feed of main slide is via ball screw spindle and infinitely variable DC motor. Mounted on the main slide is at present a table, approx. 800 x 800 mm, cross-adjustable approx. 500 mm, and suitable for holding cubic and cylindrical workpieces. Electric control via cam rail, approx. 2,500 mm long. End switch for quick feed, feed and return.
            * 2 closed 3-point steady rests.
            * FORKHARDT 3-Jaw Chuck, manually operated, Ø approx. 315 mm.
            * Modernized control panel with speed display, feed setting and display, display for kW, switch for feed, quick feed, right/left, etc.
            * 2 separate switch cabinets, separate coolant oil display device, bushes, reducers, clamping helps and lots of other accessories.

            This is a very valuable machine because of all the accessories!
          Datasheet
          Request / Contact

          Drilling and Milling M/C

          used  Drilling and Milling M/C FEHLMANN PICOMAX 100 CNC


          • HANS - JÜRGEN GEIGER
          • James-Watt-Str. 12
          • 72555 Metzingen
          • Deutschland

          • (0049)-7123-18040
            (0049)-7123-18384
          • geiger@geiger-germany.com
            www.geiger-germany.com
          #1049-721324 · Drilling and Milling M/C

          FEHLMANN - PICOMAX 100 CNC - - 1985 - HEIDENHAIN TNC 150

          Technical details
          bore capacity in steel (diameter) 30 mm︱x-travel 850 mm︱y-travel 435 mm︱Control HEIDENHAIN TNC 150 ︱total power requirement 16 kW︱weight of the machine ca. 3500 kg︱dimensions of the machine ca. m︱
          F E H L M A N N (Switzerland) CNC-Controlled High Precision Drilling and Milling Machine with HEIDENHAIN CNC-Control Model TNC 150 Model PICOMAX 100 CNC – 2 + A * Year 1985 Serial No. 16 085 109 _______________________________________________________________ Table travel: Longitudinal ( X-Axis) 850 mm Cross (Y-Axis) 435 mm Milling/Boring head travel vertical ( Z-Axis) 210 mm Table size /Clamping area 500 x 1.570 resp. 390 x 1.280 mm Mounting height below spindle, approx. 140 / 690 mm Height adjustment of Milling head max. 540 mm Distance between spindle and column 450 mm Spindle taper SF 32 Spindle quill travels 210 mm Drilling Capacity approx.. 30 mm Spindle speeds steplessly adjustable 50 – 2,500 rpm Feeds steplessly adjustable 1 – 8.000 mm/Min. Quick feed 8.000 mm/Min. Spindle drive, approx. 6 kW Total electrical load 16 kW - 400 V - 50 Hz Weight, approx. 3,500 kg Accessories / Special Features: * HEIDENHAIN – CNC Path Control System Model TNC 150 with colour Screen Grafik, Subroutines, cycles, Threading cycles, Milling Cycles, etc. Mobile Control unit with electronic handwheel. Ideal for quick set-up and approach to the workpiece. * The quill movement can be actuated manually or also by the CNC-Control, * The Drilling depth can be presetted by a 12 fold turret drum for different quillstops and with a digital display of the values on monitor. * The complete Milling/Drilling head can be positioned in 3 different heights and with automatic clamping. * Hi Precision Coordinate table controlled by the XY – CNC axis with hardened ball screw spindles. * With quick change tool holders, chucks, millers, etc. and with coolant device. Condition : Very Good to excellent - Machine under power, ideal for small batch production Delivery : Ex stock, as inspected. Payment : Net, after conclusion of contract.
            bore capacity in steel (diameter. 30 mm
            x-travel 850 mm
            y-travel 435 mm
            Control HEIDENHAIN TNC 150
            total power requirement 16 kW
            weight of the machine ca. 3500 kg
            Description :
            F E H L M A N N (Switzerland)
            CNC-Controlled High Precision Drilling and Milling Machine with
            HEIDENHAIN CNC-Control Model TNC 150
            Model PICOMAX 100 CNC – 2 + A * Year 1985 Serial No. 16 085 109
            _______________________________________________________________

            Table travel: Longitudinal ( X-Axis) 850 mm
            Cross (Y-Axis) 435 mm
            Milling/Boring head travel vertical ( Z-Axis) 210 mm

            Table size /Clamping area 500 x 1.570 resp. 390 x 1.280 mm

            Mounting height below spindle, approx. 140 / 690 mm
            Height adjustment of Milling head max. 540 mm
            Distance between spindle and column 450 mm

            Spindle taper SF 32
            Spindle quill travels 210 mm
            Drilling Capacity approx.. 30 mm

            Spindle speeds steplessly adjustable 50 – 2,500 rpm
            Feeds steplessly adjustable 1 – 8.000 mm/Min.
            Quick feed 8.000 mm/Min.

            Spindle drive, approx. 6 kW
            Total electrical load 16 kW - 400 V - 50 Hz
            Weight, approx. 3,500 kg

            Accessories / Special Features:

            * HEIDENHAIN – CNC Path Control System Model TNC 150 with colour Screen
            Grafik, Subroutines, cycles, Threading cycles, Milling Cycles, etc.
            Mobile Control unit with electronic handwheel. Ideal for quick set-up and
            approach to the workpiece.
            * The quill movement can be actuated manually or also by the CNC-Control,
            * The Drilling depth can be presetted by a 12 fold turret drum for different
            quillstops and with a digital display of the values on monitor.
            * The complete Milling/Drilling head can be positioned in 3 different heights
            and with automatic clamping.
            * Hi Precision Coordinate table controlled by the XY – CNC axis with hardened
            ball screw spindles.
            * With quick change tool holders, chucks, millers, etc. and with coolant
            device.

            Condition : Very Good to excellent - Machine under power, ideal for
            small batch production
            Delivery : Ex stock, as inspected.
            Payment : Net, after conclusion of contract.


          Datasheet
          Request / Contact
          used  Drilling and Milling M/C ACIERA 23 TR 50


          • HANS - JÜRGEN GEIGER
          • James-Watt-Str. 12
          • 72555 Metzingen
          • Deutschland

          • (0049)-7123-18040
            (0049)-7123-18384
          • geiger@geiger-germany.com
            www.geiger-germany.com
          #1049-717512 · Drilling and Milling M/C

          ACIERA - 23 TR 50 - - 1980 -

          Technical details
          bore capacity in steel (diameter) 23 mm︱x-travel 400 mm︱y-travel 285 mm︱total power requirement 3 kW︱weight of the machine ca. 1.400 kg︱dimensions of the machine ca. m︱
            bore capacity in steel (diameter. 23 mm
            x-travel 400 mm
            y-travel 285 mm
            total power requirement 3 kW
            weight of the machine ca. 1.400 kg
          Datasheet
          Request / Contact

          Drilling Machine

          used  Drilling Machine TECHNICA 4299-203


          • HANS - JÜRGEN GEIGER
          • James-Watt-Str. 12
          • 72555 Metzingen
          • Deutschland

          • (0049)-7123-18040
            (0049)-7123-18384
          • geiger@geiger-germany.com
            www.geiger-germany.com
          #1049-173164 · Drilling Machine

          TECHNICA - 4299-203 - - 1985 -

          Technical details
          bore capacity in steel (diameter) 3 - 5 mm︱throat 150 mm︱bore stroke mm︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱
          Various Special purpose drilling machines
            bore capacity in steel (diameter. 3 - 5 mm
            throat 150 mm
            Description :
            Various Special purpose drilling machines
          Datasheet
          Request / Contact

          Floor Type Boring and Milling M/C - Hor.

          used  Floor Type Boring and Milling M/C - Hor. COLLET & ENGELHARDT BF 130 - 11


          • HANS - JÜRGEN GEIGER
          • James-Watt-Str. 12
          • 72555 Metzingen
          • Deutschland

          • (0049)-7123-18040
            (0049)-7123-18384
          • geiger@geiger-germany.com
            www.geiger-germany.com
          #1049-383659 · Floor Type Boring and Milling M/C - Hor.

          COLLET & ENGELHARDT - BF 130 - 11 - - 1973 -

          Technical details
          spindle diameter 130 mm︱x-travel 3000 mm︱y-travel 2000 mm︱total power requirement 4,5 kW︱weight of the machine ca. 30 t︱
          Spindle Ø 130 mm Spindle taper SK 50 Working range: X = column, longitudinal 3,000 mm Y = headstock, vertical 2,000 mm Z = spindle stroke 1,000 mm Lower table 3,300 x 2.400 mm Max. weight on table 10 tons/m² Min./ max position of work spindle above table 770 / 2,770 mm Feeds 0.9 - 2,000 mm/min Quick feed for headstock and column 5,000 mm/min Quill feed 0.5 - 1,200 mm/min Speed range, partially infinitely variable 4.5 - 1,250 rpm Weight, approx. 30,000 kg Accessories / Special Features * HEIDENHAIN Digital Display for 3 axes. * Hardened guideways. * Ball screw spindles. * Infinitely variable spindle speeds and feeds. Feeds can be individually driven with motor. * Moving operating platform. * Hanging control panel. * Manual operating control. * Platform. * Hydrostatics in the column displacement. * Mounting plate 3,200 x 2,500 mm, planed, with t-slots. * Top table approx. 1,400 x 2,600 x height 900 mm, one face is handled. * Hydraulic clamping of column and slides. * Motor driven tool clamp. * Lots of accessories, including tool holders with and without tools, separate chip extractor, clamping aids, 1 angle plate, and other plates. Lots of other accessories. This is a strong machine which is very suitable for heavy cuts and therefore ideal for the machine tool industry and for tool manufacturers. Condition : Good. Machine can soon be inspected under power. Delivery : Ex stock as inspected Payment : Net, after conclusion of contract Thank you for your interest. We have other horizontal borers on stock. Please let us know what you need.
            spindle diameter 130 mm
            x-travel 3000 mm
            y-travel 2000 mm
            total power requirement 4,5 kW
            weight of the machine ca. 30 t
            Description :
            Spindle Ø 130 mm
            Spindle taper SK 50

            Working range: X = column, longitudinal 3,000 mm
            Y = headstock, vertical 2,000 mm
            Z = spindle stroke 1,000 mm

            Lower table 3,300 x 2.400 mm
            Max. weight on table 10 tons/m²
            Min./ max position of work spindle above table 770 / 2,770 mm

            Feeds 0.9 - 2,000 mm/min
            Quick feed for headstock and column 5,000 mm/min
            Quill feed 0.5 - 1,200 mm/min

            Speed range, partially infinitely variable 4.5 - 1,250 rpm
            Weight, approx. 30,000 kg

            Accessories / Special Features
            * HEIDENHAIN Digital Display for 3 axes.
            * Hardened guideways. * Ball screw spindles.
            * Infinitely variable spindle speeds and feeds. Feeds can be individually driven with motor.
            * Moving operating platform. * Hanging control panel. * Manual operating control.
            * Platform. * Hydrostatics in the column displacement.
            * Mounting plate 3,200 x 2,500 mm, planed, with t-slots.
            * Top table approx. 1,400 x 2,600 x height 900 mm, one face is handled.
            * Hydraulic clamping of column and slides. * Motor driven tool clamp.
            * Lots of accessories, including tool holders with and without tools, separate chip extractor, clamping aids, 1 angle plate, and other plates. Lots of other accessories.


            This is a strong machine which is very suitable for heavy cuts and therefore ideal for the machine tool industry and for tool manufacturers.

            Condition : Good. Machine can soon be inspected under power.
            Delivery : Ex stock as inspected
            Payment : Net, after conclusion of contract

            Thank you for your interest. We have other horizontal borers on stock. Please let us know what you need.
          Datasheet
          Request / Contact
          •   
          •   
          • 1  
          • 2  
          • 3  
          • 4  
          • 5  
          • 6  
          •   
          •   

            Trader Profile:   Hans - Jürgen Geiger
          Maschinen-Vertrieb GmbH

          Contact Trader



            Hans - Jürgen Geiger
          Maschinen-Vertrieb GmbH

           James-Watt-Str. 12
            72555 - Metzingen
            Deutschland
            (0049)-7123-18040">(0049)-7123-18040
            (0049)-7123-18384
            geiger@geiger-germany.com
            www.geiger-germany.com

          Profile of Trader

           MORE THAN 40 YEARS OF PRACTICE...
          Our company was founded by the current managing director, Hans-Jürgen Geiger, in 1968.
          We have expanded over the years and now have a warehouse area of more than 10,000 m² (with a crane capacity of up to 25 tons), making us one of the most important trading companies in Europe. We always have more than approximately 500 secondhand machines on stock. Mainly German and Swiss quality brands are available, and great care is taken to uphold our tradition of superior workmanship. 
          Our personnel is schooled to make every effort to help our clients find a machine which is exactly right for their requirements. 
          We are proud of our friendly and competent service. After more than 40 years of practice in this business, where competition is hard, our success in Germany and on the worldwide market vouches for our seriousness and for the quality of our machines.

             WE BELONG TO THE FOLLOWING ORGANISATIONS:
            EAMTM Brussels (International). We are members since 1980.

             MAIN SPECIALITY
            Our main speciality is gear generating machines. We are one of the worldwide leaders in this area and always have a large selection of all types of gear machines available.

             DISKUS DOUBLE-SIDED SURFACE GRINDERS
            We also deal with DISKUS Double-Sided Surface Grinders, which are relatively seldom available on the market. We always have a choice of between 10 and 20 excellent machines on stock.

          SERVICES

          We buy machines and production plants from all over the world. If you sell us your machines, you can be sure of prompt inspection, payment, transportation, etc.


             AFTER-SALE SERVICE

            Our management takes pains to provide every customer with expert before-sale consultation; and reliable after-sale service, also with regard to procurement of spare parts, etc. Clients are welcome to visit our warehouses at any time. Machines which are of interest can be inspected under power, after prior appointment.


             TRANSPORTATION

            We can arrange for reasonably priced transportation if required. All machines are rust-protected and properly packed before they leave our stock. Machines being sent to overseas destinations are usually sent in containers, and in this important area we have a lot of packing experience, so that machines are certain to arrive in good order.


             ACCESSORIES AND SPARE PARTS

            Our after-sale service includes helping you to procure accessories and spare parts for our machines in the future.


             RECONDITIONING AND MODERNIZATION

            We can also recommend companies who specialize in reconditioning and retrofitting, etc.


             PRICE ESTIMATES

            If you are selling your company, or your production machines, and need a price estimate, our Director, Hans-Jürgen Geiger, is a qualified authority (FDM and EAMTM) and will be happy to help you.


          YOU ARE VERY WELCOME TO VISIT US

          How to find our company if you are driving:
          Coming on the A81/A8 (direction munich), please take the exit to B27 direction Tuebingen/Reutlingen. After about 10 km take the branch of direction Metzingen and after another 10 km please take the 1.exit Metzingen (industrial area Laengenfeld), take a left at the first opportunity and take another left at the junction, after 150 m you find us on the right side in the James-Watt-street 12.
            

             PDF-DOWNLOAD
           
          Anfahrtsskizze im PDF-Format

          With free Adobe Acrobat Reader software, you can view and print PDF files. 


          Our company is located near to Stuttgart International Airport. We would be happy to pick you up from there.

          There is a railway station in Metzingen. A train schedule is available on the internet at www.bahn.de. We can pick you up from the station. 

          Our office and showrooms are open from Monday to Friday, 0800 to 1800 hours. Other times by appointment only. We are closed for two weeks for the Christmas Holiday, from 21st December until 7th January. 

          Metzingen is located in a very pretty area in the south of Germany. It is famous for its good wines and for its various factory outlets (including Hugo Boss and Escada). 

          We can help you find a good hotel if you want to spend some time here.




          Hans - Jürgen Geiger Maschinen-Vertrieb GmbH  72555 - Metzingen James-Watt-Str. 12 Deutschland
          Hans - Jürgen Geiger Maschinen-Vertrieb GmbH

          James-Watt-Str. 12



          Contact Trader


            Hans - Jürgen Geiger Maschinen-Vertrieb GmbH
           James-Watt-Str. 12
            72555 - Metzingen
            Deutschland
            (0049)-7123-18040
            (0049)-7123-18384
            geiger@geiger-germany.com
            www.geiger-germany.com
            Contact person:

           




          Machine category


          Abfallschere · Abkantpresse - hydraulisch · Abwälzfräs- und Stoßmaschine -kombiniert · Auswuchtmaschine · Bandsäge - horizontal · Bandsäge - Vertikal · Bandsägeautomat - Horizontal · Bearbeitungszentrum - Horizontal · Bearbeitungszentrum - Universal · Bearbeitungszentrum - Vertikal · Blechentgratungsmaschine · Bohr- und Fräsmaschine · Bohrerschleifmaschine · Bohrmaschine · Bohrwerkstisch · Bügelsägeautomat · CNC Drehmaschine · CNC-Karusselldrehmaschine - Einständer · Doppelscheibenschleifmaschine · Doppelscheibenschleifmaschine - vertik. · Doppelseitige Schleifmaschine · Drahterodiermaschine · Dreh-,Schwenk-, und Kipptisch · Drehmaschine - zyklengesteuert · Einständer - Ziehpresse - Hydraulisch · Einständerpresse - Hydraulisch · Entgratmaschine · Federprüfmaschine · Feinschleifmaschine · Flachschleifmaschine · Flachschleifmaschine - Horizontal · Formfräser-Schärfmaschine · Fräsmaschine - Universal · Fräswerkzeuge · Futterautomat - Einspindel · Gewinde-Schnecken-Schleifmaschine · Gewindefräsmaschine · Gewinderollmaschine · Gewindeschleifmaschine · Gewindewirbelmaschine · Graviermaschine · Hobel-, Fräs- und Schleifmaschine · Hochfrequenzspindel · Hochgeschwindigkeits Bearbeitungszentrum · Honmaschine - handbetätigt · Honmaschine - Innen - Vertikal · Hydraulische - Doppelständerziehpresse · Hydraulische - Viersäulenpresse · Hydraulische - Zweisäulenpresse · Härteanlage - Induktion · Härteofen · Innenschleifmaschine · Kaltkreissäge · Kaltkreissäge - Vertikal · Kaltwalzmaschine · Kegelrad - Läppmaschine · Kegelrad-Prüfmaschine · Kegelradschleifmaschine · Keilwellenschleifmaschine · Koordinatenmeßmaschine · Koordinatenschleifmaschine · Kreissägenautomat · Kurbelwellenbandfinishmaschine · Langdrehautomat · Lehrenbohrwerk - Vertikal · Leit- und Zugspindeldrehmaschine · Leiterplattenfertigungsmaschine · Läppmaschine · Messmaschine · Nutenziehmaschine · Oberfräsmaschine · Ofen - Elektro · Plandrehbank · Plattenbohrwerk - Horizontal · Plattensägen vertikal · Profilprojektor · Präzisionsbandsäge · Punktschweißmaschine · Radialbohrmaschine · Reihenbohrmaschine · Richtmaschine · Richtpresse - Doppelständer · Rißprüfmaschine · Rundschleifmaschine - Außen · Rundschleifmaschine - Universal · Rundtischflachschleifmaschine - Vertikal · Rundtischflächenschleifmaschine - Horiz. · Schabrad-Schärfmaschine · Schleifscheibenprofiliergerät · Schneidradschärfmaschine · Schweißanlage · Schwenkbarer - Rundtisch · Schwenkbiegemaschine · Senkerodiermaschine · Sonderfeinbohrmaschine · Sondermaschine · Spitzenlose - Rundschleifmaschine · Stanzautomat - Doppelständer · Strangpressen · Säulenbohrmaschine · Tafelschere - hydraulisch · Tafelschere - mechanisch · Teilapparat · Tieflochbohrmaschine · Tischbohrwerk · Trennschleifmaschine · Tuschierpresse · Universal - Rundtisch · Vorschubapparat · Werkzeugfräsmaschine - Universal · Werkzeugschleifmaschine · Werkzeugschleifmaschine - Universal · Wickelmaschine · Wärmeofen · Zahnflankenschleifmaschine · Zahnkantenfräsmaschine · Zahnrad-Abwälzfräsmaschine - horizontal · Zahnrad-Abwälzfräsmaschine - vertikal · Zahnradhonmaschine · Zahnradprüfmaschine · Zahnradschleifmaschine · Zahnradstossmaschine · Zahnstangenfräsmaschine · Zentrumschleifmaschine · Zugprüfmaschine ·