European network of stockholding machinery dealers

Category:
    Manufacturer:
      Machines:
        Trader:

          Frech GmbH - Stockist for used machines

          Machinelist:


          Double Column Drawing Press -Hydr.

          used  Double Column Drawing Press -Hydr. LAUFFER RZU 100


          • Frech GmbH
          • Werderstr. 82
          • 74889 Sinsheim
          • Deutschland

          • 0049-7261-1011
            0049-7261-63966
          • info@frech-maschinen.de
            www.frech-maschinen.de
          #1073-97801 · Double Column Drawing Press -Hydr.

          LAUFFER - RZU 100 - - 2000 -

          Technical details
          pressure 100 t︱distance between columns 1525 mm︱stroke 450 mm︱distance table/ram 850 mm︱table height over floor 950 mm︱die cushion pressure at table 30 to︱die cushion stroke at table 70 mm︱die cushion area mm︱ram surface 1500 x 1150 mm︱feed down 400 mm/sec︱feed up 350 mm/sec︱working feed 63 mm/sec︱oil volume l︱column travel -side 470 mm︱total power requirement 65,0 kW︱weight of the machine ca. 22,0 t︱dimensions of the machine ca. 4,06 x 1,60 x 5,10 m︱
          Equipment: Sick photocell Hydraulic ejector in the slide Mechanical depth stop Hydraulic cutting shock absorption Hydraulic drawing cushion / ejector in the table Control: Siemens S 7 * as stands and lies, WITHOUT putting into operation *
            pressure 100 t
            distance between columns 1525 mm
            stroke 450 mm
            distance table/ram 850 mm
            table height over floor 950 mm
            die cushion pressure at table 30 to
            die cushion stroke at table 70 mm
            ram surface 1500 x 1150 mm
            feed down 400 mm/sec
            feed up 350 mm/sec
            working feed 63 mm/sec
            column travel -side 470 mm
            total power requirement 65,0 kW
            weight of the machine ca. 22,0 t
            dimensions of the machine ca. 4,06 x 1,60 x 5,10 m
            Description :
            Equipment:
            Sick photocell
            Hydraulic ejector in the slide
            Mechanical depth stop
            Hydraulic cutting shock absorption
            Hydraulic drawing cushion / ejector in the table
            Control: Siemens S 7

            * as stands and lies, WITHOUT putting into operation *
          Datasheet
          Request / Contact
          used  Double Column Drawing Press -Hydr. DUNKES HS 4-100 (UVV)


          • Frech GmbH
          • Werderstr. 82
          • 74889 Sinsheim
          • Deutschland

          • 0049-7261-1011
            0049-7261-63966
          • info@frech-maschinen.de
            www.frech-maschinen.de
          #1073-97800 · Double Column Drawing Press -Hydr.

          DUNKES - HS 4-100 (UVV) - - 1991 -

          Technical details
          pressure 100 t︱distance between columns 770 mm︱stroke 400 mm︱distance table/ram 800 mm︱table height over floor 850 mm︱die cushion pressure at table 40 to︱die cushion stroke at table 200 mm︱die cushion area 600 x 600 mm︱ram surface 770 x 900 mm︱feed down 62 mm/sec︱feed up 350 mm/sec︱working feed 17,50 mm/sec︱oil volume 700 l︱column travel -side 600 mm︱total power requirement 42 kW︱weight of the machine ca. 9,0 t︱dimensions of the machine ca. 2,60 x 2,00 x 3,80 m︱
          equipment: UVV: approved for manual inlay work UVV 11.064 - VBG 7n5.2 pressure / time and path-dependent controllable Hydraulic drawing cushion in the table Cutting shock absorption Depth stop Two-hand operation Control: Siemens S 5 * WITH start up the machine at the current location in the given condition *
            pressure 100 t
            distance between columns 770 mm
            stroke 400 mm
            distance table/ram 800 mm
            table height over floor 850 mm
            die cushion pressure at table 40 to
            die cushion stroke at table 200 mm
            die cushion area 600 x 600 mm
            ram surface 770 x 900 mm
            feed down 62 mm/sec
            feed up 350 mm/sec
            working feed 17,50 mm/sec
            oil volume 700 l
            column travel -side 600 mm
            total power requirement 42 kW
            weight of the machine ca. 9,0 t
            dimensions of the machine ca. 2,60 x 2,00 x 3,80 m
            Description :
            equipment:
            UVV: approved for manual inlay work UVV 11.064 - VBG 7n5.2
            pressure / time and path-dependent controllable
            Hydraulic drawing cushion in the table
            Cutting shock absorption
            Depth stop
            Two-hand operation
            Control: Siemens S 5
            * WITH start up the machine at the current location in the given condition *

          Datasheet
          Request / Contact

          Double-Column Presse

          used  Double-Column Presse EXNER EX 40 (UVV)


          • Frech GmbH
          • Werderstr. 82
          • 74889 Sinsheim
          • Deutschland

          • 0049-7261-1011
            0049-7261-63966
          • info@frech-maschinen.de
            www.frech-maschinen.de
          #1073-97797 · Double-Column Presse

          EXNER - EX 40 (UVV) - - 1992 -

          Technical details
          pressure 040 t︱distance between columns 500 mm︱stroke 150 mm︱distance table/ram 300 mm︱table surface area 480 x 400 mm︱hole in the table 50 mm︱table height over floor 950 mm︱column travel -side 150 mm︱ram surface 150 mm︱feed down 480 mm/sec︱feed up 480 mm/sec︱working feed 20 mm/sec︱oil volume 160 l︱total power requirement 7,50 kW︱weight of the machine ca. 2,6 t︱dimensions of the machine ca. 1,10 x 1,40 x 2,40 m︱
          Equipment: UVV: approved for manual inlay work UVV 11.064 - VBG 7n5.2 Sick photocell Cutting shock absorption * WITH start up the machine at the current location in the given condition *
            pressure 040 t
            distance between columns 500 mm
            stroke 150 mm
            distance table/ram 300 mm
            table surface area 480 x 400 mm
            hole in the table 50 mm
            table height over floor 950 mm
            column travel -side 150 mm
            ram surface 150 mm
            feed down 480 mm/sec
            feed up 480 mm/sec
            working feed 20 mm/sec
            oil volume 160 l
            total power requirement 7,50 kW
            weight of the machine ca. 2,6 t
            dimensions of the machine ca. 1,10 x 1,40 x 2,40 m
            Description :
            Equipment:
            UVV: approved for manual inlay work UVV 11.064 - VBG 7n5.2
            Sick photocell
            Cutting shock absorption
            * WITH start up the machine at the current location in the given condition *

          Datasheet
          Request / Contact
          used  Double-Column Presse MÜLLER-WEINGARTEN SKD 160.2.10


          • Frech GmbH
          • Werderstr. 82
          • 74889 Sinsheim
          • Deutschland

          • 0049-7261-1011
            0049-7261-63966
          • info@frech-maschinen.de
            www.frech-maschinen.de
          #1073-97799 · Double-Column Presse

          MÜLLER-WEINGARTEN - SKD 160.2.10 - - 1990/2005 -

          Technical details
          pressure 160 t︱distance between columns 1360 mm︱stroke 300 mm︱distance table/ram 620 mm︱table surface area 1300 x 900 mm︱hole in the table mm︱table height over floor 950 mm︱column travel -side 640 mm︱ram surface 1300 x 900 mm︱feed down mm/sec︱feed up mm/sec︱working feed mm/sec︱oil volume l︱total power requirement 45,0 kW︱weight of the machine ca. 16,0 t︱dimensions of the machine ca. 2,50 x 2,10 x 4,10 m︱
          Equipment: Hydraulic cutting shock absorption Fixed stop Controllable depending on pressure, time and travel Control: Siemens S 7 * as stands and lies, WITHOUT putting into operation *
            pressure 160 t
            distance between columns 1360 mm
            stroke 300 mm
            distance table/ram 620 mm
            table surface area 1300 x 900 mm
            table height over floor 950 mm
            column travel -side 640 mm
            ram surface 1300 x 900 mm
            total power requirement 45,0 kW
            weight of the machine ca. 16,0 t
            dimensions of the machine ca. 2,50 x 2,10 x 4,10 m
            Description :
            Equipment:
            Hydraulic cutting shock absorption
            Fixed stop
            Controllable depending on pressure, time and travel
            Control: Siemens S 7

            * as stands and lies, WITHOUT putting into operation *

          Datasheet
          Request / Contact

          Eccentric Press - Single Column

          used  Eccentric Press - Single Column HENSEL EBU SKE 75 FU (UVV)


          • Frech GmbH
          • Werderstr. 82
          • 74889 Sinsheim
          • Deutschland

          • 0049-7261-1011
            0049-7261-63966
          • info@frech-maschinen.de
            www.frech-maschinen.de
          #1073-97787 · Eccentric Press - Single Column

          HENSEL - EBU SKE 75 FU (UVV) - - RP 2000 -

          Technical details
          pressure 075 t︱throat 295 mm︱stroke 16 - 140 mm︱distance table/ram 450 mm︱table surface area 800 x 595 mm︱table height over floor 745 mm︱ram surface 470 x 180 mm︱ram adjustment 80 mm︱hole in the table 330 x 230 mm︱no.of strokes 75 /min.︱total power requirement 5,50 kW︱weight of the machine ca. 5,00 t︱dimensions of the machine ca. 1,50 x 2,50 x 2,50 m︱
          Equipment: UVV: approved for manual inlay work UVV 11.062 - VBG 7n5.1 Pneumatic coupling Mechanical overload protection in the ram Two-hand operation * WITH start up the machine at the current location in the given condition *
            pressure 075 t
            throat 295 mm
            stroke 16 - 140 mm
            distance table/ram 450 mm
            table surface area 800 x 595 mm
            table height over floor 745 mm
            ram surface 470 x 180 mm
            ram adjustment 80 mm
            hole in the table 330 x 230 mm
            no.of strokes 75 /min.
            total power requirement 5,50 kW
            weight of the machine ca. 5,00 t
            dimensions of the machine ca. 1,50 x 2,50 x 2,50 m
            Description :
            Equipment:
            UVV: approved for manual inlay work UVV 11.062 - VBG 7n5.1
            Pneumatic coupling
            Mechanical overload protection in the ram
            Two-hand operation
            * WITH start up the machine at the current location in the given condition *
          Datasheet
          Request / Contact
          used  Eccentric Press - Single Column HENSEL EBU SKE 100 FU


          • Frech GmbH
          • Werderstr. 82
          • 74889 Sinsheim
          • Deutschland

          • 0049-7261-1011
            0049-7261-63966
          • info@frech-maschinen.de
            www.frech-maschinen.de
          #1073-97785 · Eccentric Press - Single Column

          HENSEL - EBU SKE 100 FU - - RP 2000 -

          Technical details
          pressure 100 t︱throat 325 mm︱stroke 21 - 140 mm︱no.of strokes 60 /min.︱distance table/ram 420 mm︱table surface area 900 x 630 mm︱hole in the table 330 x 230 mm︱table height over floor 720 mm︱passage to the back mm︱ram surface 490 x 310 mm︱ram adjustment 85 mm︱table adjustable mm︱total power requirement 7,5 kW︱weight of the machine ca. 6,5 t︱dimensions of the machine ca. 1,40 x 2,45 x 2,70 m︱
          Equipment: UVV: approved for manual inlay work EN 692, BGR 500 Mechanical overload protection in the ram Two-hand operation * WITH start up the machine at the current location in the given condition *
            pressure 100 t
            throat 325 mm
            stroke 21 - 140 mm
            no.of strokes 60 /min.
            distance table/ram 420 mm
            table surface area 900 x 630 mm
            hole in the table 330 x 230 mm
            table height over floor 720 mm
            ram surface 490 x 310 mm
            ram adjustment 85 mm
            total power requirement 7,5 kW
            weight of the machine ca. 6,5 t
            dimensions of the machine ca. 1,40 x 2,45 x 2,70 m
            Description :
            Equipment:
            UVV: approved for manual inlay work EN 692, BGR 500
            Mechanical overload protection in the ram
            Two-hand operation
            * WITH start up the machine at the current location in the given condition *

          Datasheet
          Request / Contact
          used  Eccentric Press - Single Column WEINGARTEN ARP 160 (UVV)


          • Frech GmbH
          • Werderstr. 82
          • 74889 Sinsheim
          • Deutschland

          • 0049-7261-1011
            0049-7261-63966
          • info@frech-maschinen.de
            www.frech-maschinen.de
          #1073-97783 · Eccentric Press - Single Column

          WEINGARTEN - ARP 160 (UVV) - - 1992 -

          Technical details
          pressure 160 t︱throat 480 mm︱stroke 20 - 160 mm︱no.of strokes 50 /min.︱distance table/ram 615 mm︱table surface area 1070 x 700 mm︱hole in the table 355 mm︱table height over floor 850 mm︱passage to the back 700 mm︱ram surface 800 x 500 mm︱ram adjustment 100 mm︱total power requirement 22,5 kW︱weight of the machine ca. 13,5 t︱dimensions of the machine ca. 1,60 x 2,40 x 3,50 m︱
          Equipment: UVV: approved for manual inlay work UVV 11.062 - VBG 7n5.1 Pneumatic clutch / brake combination Hydraulic overload protection in the slide Motorized slide adjustment Two-hand operation * MIT start up the machine at the current location in the given condition *
            pressure 160 t
            throat 480 mm
            stroke 20 - 160 mm
            no.of strokes 50 /min.
            distance table/ram 615 mm
            table surface area 1070 x 700 mm
            hole in the table 355 mm
            table height over floor 850 mm
            passage to the back 700 mm
            ram surface 800 x 500 mm
            ram adjustment 100 mm
            total power requirement 22,5 kW
            weight of the machine ca. 13,5 t
            dimensions of the machine ca. 1,60 x 2,40 x 3,50 m
            Description :
            Equipment:
            UVV: approved for manual inlay work UVV 11.062 - VBG 7n5.1
            Pneumatic clutch / brake combination
            Hydraulic overload protection in the slide
            Motorized slide adjustment
            Two-hand operation
            * MIT start up the machine at the current location in the given condition *

          Datasheet
          Request / Contact
          used  Eccentric Press - Single Column HEILBRONN REP 80 (UVV)


          • Frech GmbH
          • Werderstr. 82
          • 74889 Sinsheim
          • Deutschland

          • 0049-7261-1011
            0049-7261-63966
          • info@frech-maschinen.de
            www.frech-maschinen.de
          #1073-97786 · Eccentric Press - Single Column

          HEILBRONN - REP 80 (UVV) - - 1992 -

          Technical details
          pressure 080 t︱throat 300 mm︱stroke 8 - 100 mm︱no.of strokes 60 /min.︱distance table/ram 440 mm︱table surface area 720 x 600 mm︱hole in the table 300 x 175 mm︱table height over floor 860 mm︱passage to the back mm︱ram surface 400 x 270 mm︱ram adjustment 60 mm︱table adjustable mm︱total power requirement 7,5 kW︱weight of the machine ca. 6,0 t︱dimensions of the machine ca. 1,30 x 2,20 x 3,05 m︱
          Equipment: UVV: approved for manual inlay work UVV 11.062 - VBG 7n5.1 Hydraulic clutch / brake combination, Ortlinghaus Hydraulic overload protection in the slide Motorized slide adjustment Pneumatic slide weight compensation Two-hand and foot control * WITH start up the machine at the current location in the given condition *
            pressure 080 t
            throat 300 mm
            stroke 8 - 100 mm
            no.of strokes 60 /min.
            distance table/ram 440 mm
            table surface area 720 x 600 mm
            hole in the table 300 x 175 mm
            table height over floor 860 mm
            ram surface 400 x 270 mm
            ram adjustment 60 mm
            total power requirement 7,5 kW
            weight of the machine ca. 6,0 t
            dimensions of the machine ca. 1,30 x 2,20 x 3,05 m
            Description :
            Equipment:
            UVV: approved for manual inlay work UVV 11.062 - VBG 7n5.1
            Hydraulic clutch / brake combination, Ortlinghaus
            Hydraulic overload protection in the slide
            Motorized slide adjustment
            Pneumatic slide weight compensation
            Two-hand and foot control
            * WITH start up the machine at the current location in the given condition *

          Datasheet
          Request / Contact
          used  Eccentric Press - Single Column WEINGARTEN ARP 250 (UVV)


          • Frech GmbH
          • Werderstr. 82
          • 74889 Sinsheim
          • Deutschland

          • 0049-7261-1011
            0049-7261-63966
          • info@frech-maschinen.de
            www.frech-maschinen.de
          #1073-97782 · Eccentric Press - Single Column

          WEINGARTEN - ARP 250 (UVV) - - 1988 -

          Technical details
          pressure 250 t︱throat 480 mm︱stroke 20 - 190 mm︱no.of strokes 20 - 60 /min.︱distance table/ram 690 mm︱table surface area 1400 x 850 mm︱hole in the table 450 / 500 mm︱table height over floor 850 mm︱passage to the back 950 mm︱ram surface 1000 x 700 mm︱ram adjustment 125 mm︱total power requirement 25,0 + 6,0 kW︱weight of the machine ca. 30 t︱dimensions of the machine ca. 2,35 x 3,15 x 3,70 m︱
          Equipment: UVV: approved for manual inlay work UVV 11.062 - VBG 7n5.1 Pneumatic clutch / brake combination, Ortlinghaus Hydraulic overload protection in the slide Motorized slide adjustment Semi-automatic stroke adjustment Pneumatic slide weight compensation Two-hand operation * WITH start up the machine at the current location * WITH new control Siemens S7-1500 F, comfort control via touch panel Execution of the control according to EN 692 or EN 693 WITH mechanical partial overhaul
            pressure 250 t
            throat 480 mm
            stroke 20 - 190 mm
            no.of strokes 20 - 60 /min.
            distance table/ram 690 mm
            table surface area 1400 x 850 mm
            hole in the table 450 / 500 mm
            table height over floor 850 mm
            passage to the back 950 mm
            ram surface 1000 x 700 mm
            ram adjustment 125 mm
            total power requirement 25,0 + 6,0 kW
            weight of the machine ca. 30 t
            dimensions of the machine ca. 2,35 x 3,15 x 3,70 m
            Description :
            Equipment:
            UVV: approved for manual inlay work UVV 11.062 - VBG 7n5.1
            Pneumatic clutch / brake combination, Ortlinghaus
            Hydraulic overload protection in the slide
            Motorized slide adjustment
            Semi-automatic stroke adjustment
            Pneumatic slide weight compensation
            Two-hand operation
            * WITH start up the machine at the current location *
            WITH new control Siemens S7-1500 F, comfort control via touch panel
            Execution of the control according to EN 692 or EN 693
            WITH mechanical partial overhaul
          Datasheet
          Request / Contact
          used  Eccentric Press - Single Column BALCONI 2 MT RS/L


          • Frech GmbH
          • Werderstr. 82
          • 74889 Sinsheim
          • Deutschland

          • 0049-7261-1011
            0049-7261-63966
          • info@frech-maschinen.de
            www.frech-maschinen.de
          #1073-97784 · Eccentric Press - Single Column

          BALCONI - 2 MT RS/L - - 1982 -

          Technical details
          pressure 150 t︱throat 520 mm︱stroke 30 - 200 mm︱no.of strokes 15 - 60 /min.︱distance table/ram 650 mm︱table surface area 1600 x 1000 mm︱hole in the table 1040 x 140 mm︱table height over floor 1000 mm︱passage to the back 1000 mm︱ram surface 1400 x 800 mm︱ram adjustment 120 mm︱table adjustable mm︱total power requirement 20,0 kW︱weight of the machine ca. 27,5 t︱dimensions of the machine ca. 2,30 x 2,75 x 4,50 m︱
          quipment: UVV: only approved for safe tools infinitely variable drive Clutch / brake combination pneumatic; Ortlinghaus Hydraulic overload protection in the slide Pneumatic slide weight compensation Semi-automatic slide adjustment WITH new control Siemens S7-1500 F, comfort control via touch panel Execution of the control according to EN 692 or EN 693 * WITH start up the machine at the current location *
            pressure 150 t
            throat 520 mm
            stroke 30 - 200 mm
            no.of strokes 15 - 60 /min.
            distance table/ram 650 mm
            table surface area 1600 x 1000 mm
            hole in the table 1040 x 140 mm
            table height over floor 1000 mm
            passage to the back 1000 mm
            ram surface 1400 x 800 mm
            ram adjustment 120 mm
            total power requirement 20,0 kW
            weight of the machine ca. 27,5 t
            dimensions of the machine ca. 2,30 x 2,75 x 4,50 m
            Description :
            quipment:
            UVV: only approved for safe tools
            infinitely variable drive
            Clutch / brake combination pneumatic; Ortlinghaus
            Hydraulic overload protection in the slide
            Pneumatic slide weight compensation
            Semi-automatic slide adjustment
            WITH new control Siemens S7-1500 F, comfort control via touch panel
            Execution of the control according to EN 692 or EN 693
            * WITH start up the machine at the current location *

          Datasheet
          Request / Contact

          Single Column Press - Hydraulic

          used  Single Column Press - Hydraulic G+K HPC 25 A (CE)


          • Frech GmbH
          • Werderstr. 82
          • 74889 Sinsheim
          • Deutschland

          • 0049-7261-1011
            0049-7261-63966
          • info@frech-maschinen.de
            www.frech-maschinen.de
          #1073-97791 · Single Column Press - Hydraulic

          G+K - HPC 25 A (CE) - - 2015 -

          Technical details
          pressure 025 t︱throat 290 mm︱stroke 200 mm︱distance table/ram 400 (500) mm︱hole in the table 60 mm︱table height over floor 940 mm︱ram surface mm︱feed down 150 mm/sec︱feed up 150 mm/sec︱working feed 18 mm/sec︱table surface area 650 x 450 mm︱oil volume 350 l︱total power requirement 11,0 kW︱weight of the machine ca. 5,2 t︱dimensions of the machine ca. 0,80 x 1,80 x 3,20 m︱
          Equipment: UVV: approved for manual inlay work CE standard - EN 693, BGR 500 Sick photocell Mechanical depth stop; adjustable by motor Two-hand and foot control Control: Siemens S 7 / Pilz PNOZ * WITH start up the machine at the current location in the given condition *
            pressure 025 t
            throat 290 mm
            stroke 200 mm
            distance table/ram 400 (500) mm
            hole in the table 60 mm
            table height over floor 940 mm
            feed down 150 mm/sec
            feed up 150 mm/sec
            working feed 18 mm/sec
            table surface area 650 x 450 mm
            oil volume 350 l
            total power requirement 11,0 kW
            weight of the machine ca. 5,2 t
            dimensions of the machine ca. 0,80 x 1,80 x 3,20 m
            Description :
            Equipment:
            UVV: approved for manual inlay work CE standard - EN 693, BGR 500
            Sick photocell
            Mechanical depth stop; adjustable by motor
            Two-hand and foot control
            Control: Siemens S 7 / Pilz PNOZ

            * WITH start up the machine at the current location in the given condition *
          Datasheet
          Request / Contact
          used  Single Column Press - Hydraulic MÜLLER CL 100.1.84 (CE)


          • Frech GmbH
          • Werderstr. 82
          • 74889 Sinsheim
          • Deutschland

          • 0049-7261-1011
            0049-7261-63966
          • info@frech-maschinen.de
            www.frech-maschinen.de
          #1073-97794 · Single Column Press - Hydraulic

          MÜLLER - CL 100.1.84 (CE) - - 2003 -

          Technical details
          pressure 100 t︱throat 360 mm︱stroke 600 mm︱distance table/ram 900 mm︱hole in the table 120 mm︱table height over floor 900 mm︱ram surface 800 x 600 mm︱feed down mm/sec︱feed up mm/sec︱working feed mm/sec︱table surface area 1050 x 700 mm︱oil volume 650 l︱total power requirement 30,0 kW︱weight of the machine ca. 14,0 t︱dimensions of the machine ca. 1,80 x 2,80 x 3,60 m︱
          Equipment: UVV: approved for manual inlay work CE standard - EN 693, BGR 500 Sick photocell Two-hand operation * WITH start up the machine at the current location * WITH new control Siemens S7-1500 F, comfort control via touch panel Execution of the control according to EN 692 or EN 693
            pressure 100 t
            throat 360 mm
            stroke 600 mm
            distance table/ram 900 mm
            hole in the table 120 mm
            table height over floor 900 mm
            ram surface 800 x 600 mm
            table surface area 1050 x 700 mm
            oil volume 650 l
            total power requirement 30,0 kW
            weight of the machine ca. 14,0 t
            dimensions of the machine ca. 1,80 x 2,80 x 3,60 m
            Description :
            Equipment:
            UVV: approved for manual inlay work CE standard - EN 693, BGR 500
            Sick photocell
            Two-hand operation
            * WITH start up the machine at the current location *
            WITH new control Siemens S7-1500 F, comfort control via touch panel
            Execution of the control according to EN 692 or EN 693

          Datasheet
          Request / Contact
          used  Single Column Press - Hydraulic MÜLLER CT 40.12.1 (CE)


          • Frech GmbH
          • Werderstr. 82
          • 74889 Sinsheim
          • Deutschland

          • 0049-7261-1011
            0049-7261-63966
          • info@frech-maschinen.de
            www.frech-maschinen.de
          #1073-97792 · Single Column Press - Hydraulic

          MÜLLER - CT 40.12.1 (CE) - - 1995 -

          Technical details
          pressure 040 t︱throat 320 mm︱stroke 300 mm︱distance table/ram 500 mm︱hole in the table 80 mm︱table height over floor 900 mm︱ram surface 450 x 400 mm︱feed down mm/sec︱feed up mm/sec︱working feed mm/sec︱table surface area 640 x 620 mm︱oil volume 300 l︱total power requirement 5,5 kW︱weight of the machine ca. 3,6 t︱dimensions of the machine ca. 1,10 x 1,70 x 2,70 m︱
          Equipment: UVV: approved for manual inlay work CE standard - EN 693, BGR 500 Controllable depending on pressure, time and travel Adjustable working speed Two-hand operation * WITH start up the machine at the current location in the given condition *
            pressure 040 t
            throat 320 mm
            stroke 300 mm
            distance table/ram 500 mm
            hole in the table 80 mm
            table height over floor 900 mm
            ram surface 450 x 400 mm
            table surface area 640 x 620 mm
            oil volume 300 l
            total power requirement 5,5 kW
            weight of the machine ca. 3,6 t
            dimensions of the machine ca. 1,10 x 1,70 x 2,70 m
            Description :
            Equipment:
            UVV: approved for manual inlay work CE standard - EN 693, BGR 500
            Controllable depending on pressure, time and travel
            Adjustable working speed
            Two-hand operation

            * WITH start up the machine at the current location in the given condition *
          Datasheet
          Request / Contact
          used  Single Column Press - Hydraulic SCHÖN U-NH-C 65 (UVV)


          • Frech GmbH
          • Werderstr. 82
          • 74889 Sinsheim
          • Deutschland

          • 0049-7261-1011
            0049-7261-63966
          • info@frech-maschinen.de
            www.frech-maschinen.de
          #1073-97793 · Single Column Press - Hydraulic

          SCHÖN - U-NH-C 65 (UVV) - - 1990 -

          Technical details
          pressure 060 t︱throat 400 mm︱stroke 600 mm︱distance table/ram 700 mm︱hole in the table mm︱table height over floor 850 mm︱ram surface 700 x 700 mm︱feed down mm/sec︱feed up mm/sec︱working feed mm/sec︱table surface area 1120 x 700 mm︱oil volume 275 l︱total power requirement 7,5 kW︱weight of the machine ca. 7,3 t︱dimensions of the machine ca. 1,60 x 2,00 x 3,70 m︱
          Equipment: UVV: approved for manual inlay work UVV 11.064 - VBG 7n5.2 § 20 Control: Siemens S 5 * WITH start up the machine at the current location in the given condition *
            pressure 060 t
            throat 400 mm
            stroke 600 mm
            distance table/ram 700 mm
            table height over floor 850 mm
            ram surface 700 x 700 mm
            table surface area 1120 x 700 mm
            oil volume 275 l
            total power requirement 7,5 kW
            weight of the machine ca. 7,3 t
            dimensions of the machine ca. 1,60 x 2,00 x 3,70 m
            Description :
            Equipment:
            UVV: approved for manual inlay work UVV 11.064 - VBG 7n5.2 § 20
            Control: Siemens S 5

            * WITH start up the machine at the current location in the given condition *

          Datasheet
          Request / Contact

          Automatic Punching Press

          used  Automatic Punching Press HELMERDING KDH 125/1250/2 (CE)


          • Frech GmbH
          • Werderstr. 82
          • 74889 Sinsheim
          • Deutschland

          • 0049-7261-1011
            0049-7261-63966
          • info@frech-maschinen.de
            www.frech-maschinen.de
          #1073-97780 · Automatic Punching Press

          HELMERDING - KDH 125/1250/2 (CE) - - 2000 -

          Technical details
          pressure 0125 t︱no. of strokes 40 - 160 Hub/min︱sheet width mm︱stroke 8 - 130 mm︱distance between columns 1250 mm︱distance table/ram 480 mm︱table surface area 1250 x 900 mm︱hole in the table 1000 x 200 mm︱table height over floor 1000 mm︱column travel -side 520 mm︱ram surface 1100 x 800 mm︱ram adjustment 80 mm︱total power requirement 22,5 kW︱weight of the machine ca. 25 t︱dimensions of the machine ca. 2,30 x 1,90 x 3,60 m︱
          Equipment: infinitely variable drive Hydraulic clutch / brake combination Hydraulic overload protection in the slide Pneumatic slide weight compensation Motorized slide adjustment * as stands and lies, WITHOUT putting into operation *
            pressure 0125 t
            no. of strokes 40 - 160 Hub/min
            stroke 8 - 130 mm
            distance between columns 1250 mm
            distance table/ram 480 mm
            table surface area 1250 x 900 mm
            hole in the table 1000 x 200 mm
            table height over floor 1000 mm
            column travel -side 520 mm
            ram surface 1100 x 800 mm
            ram adjustment 80 mm
            total power requirement 22,5 kW
            weight of the machine ca. 25 t
            dimensions of the machine ca. 2,30 x 1,90 x 3,60 m
            Description :
            Equipment:
            infinitely variable drive
            Hydraulic clutch / brake combination
            Hydraulic overload protection in the slide
            Pneumatic slide weight compensation
            Motorized slide adjustment

            * as stands and lies, WITHOUT putting into operation *
          Datasheet
          Request / Contact
          used  Automatic Punching Press KAISER V 40 WHS


          • Frech GmbH
          • Werderstr. 82
          • 74889 Sinsheim
          • Deutschland

          • 0049-7261-1011
            0049-7261-63966
          • info@frech-maschinen.de
            www.frech-maschinen.de
          #1073-9838 · Automatic Punching Press

          KAISER - V 40 WHS - - 1985/2003 überholt -

          Technical details
          pressure 0040 t︱no. of strokes 100 - 1000 Hub/min︱sheet width mm︱ram stroke - adjustable min/max 8 - 50 mm︱Installation height (bottom stroke, top adjustment 310 mm︱distance between columns 820 mm︱table surface area 810 x 450 mm︱dimension of ram 720 x 350 mm︱hole in the table 600 x 110 mm︱table height over floor 1030 mm︱ram adjustment 50 mm︱total power requirement 19,5 kW︱weight of the machine ca. 6,80 t︱dimensions of the machine ca. m︱
          The machine was mechanically and electrically completely overhauled in 2003. ZEHNDER & SUMMER roller feeder - built in 2003
            pressure 0040 t
            no. of strokes 100 - 1000 Hub/min
            ram stroke - adjustable min/max 8 - 50 mm
            Installation height (bottom stro. 310 mm
            distance between columns 820 mm
            table surface area 810 x 450 mm
            dimension of ram 720 x 350 mm
            hole in the table 600 x 110 mm
            table height over floor 1030 mm
            ram adjustment 50 mm
            total power requirement 19,5 kW
            weight of the machine ca. 6,80 t
            Description :
            The machine was mechanically and electrically completely overhauled in 2003.

            ZEHNDER & SUMMER roller feeder - built in 2003
          Datasheet
          Request / Contact
          used  Automatic Punching Press SCHULER OR-100-0,80-120


          • Frech GmbH
          • Werderstr. 82
          • 74889 Sinsheim
          • Deutschland

          • 0049-7261-1011
            0049-7261-63966
          • info@frech-maschinen.de
            www.frech-maschinen.de
          #1073-97781 · Automatic Punching Press

          SCHULER - OR-100-0,80-120 - - 1982 -

          Technical details
          pressure 0100 t︱no. of strokes 30 - 80 Hub/min︱sheet width mm︱stroke 8 - 120 mm︱distance between columns 835 mm︱distance table/ram 500 mm︱table surface area 800 x 880 mm︱hole in the table 850 mm︱table height over floor mm︱column travel -side 480 mm︱ram surface 710 x 470 mm︱ram adjustment 80 mm︱total power requirement 15,0 kW︱weight of the machine ca. 10 t︱dimensions of the machine ca. 2,30 x 1,70 x 3,80 m︱
          Equipment: infinitely variable drive Hydraulic clutch / brake combination Hydraulic overload protection in the slide Pneumatic slide weight compensation Motorized slide adjustment * as stands and lies, WITHOUT putting into operation *
            pressure 0100 t
            no. of strokes 30 - 80 Hub/min
            stroke 8 - 120 mm
            distance between columns 835 mm
            distance table/ram 500 mm
            table surface area 800 x 880 mm
            hole in the table 850 mm
            column travel -side 480 mm
            ram surface 710 x 470 mm
            ram adjustment 80 mm
            total power requirement 15,0 kW
            weight of the machine ca. 10 t
            dimensions of the machine ca. 2,30 x 1,70 x 3,80 m
            Description :
            Equipment:
            infinitely variable drive
            Hydraulic clutch / brake combination
            Hydraulic overload protection in the slide
            Pneumatic slide weight compensation
            Motorized slide adjustment

            * as stands and lies, WITHOUT putting into operation *
          Datasheet
          Request / Contact

          Coil Line

          used  Coil Line DREHER 2372B-FPS/1675/7B-FQ/1082B


          • Frech GmbH
          • Werderstr. 82
          • 74889 Sinsheim
          • Deutschland

          • 0049-7261-1011
            0049-7261-63966
          • info@frech-maschinen.de
            www.frech-maschinen.de
          #1073-60073 · Coil Line

          DREHER - 2372B-FPS/1675/7B-FQ/1082B - - 1999 -

          Technical details
          sheet width 0300 mm︱coil outside dia. 1600 mm︱weight max. in kg 2 x 2500 kg︱thickness of sheet ca. 0,60 - 3,00 mm︱feed rolls 2 ︱exit pinch rolls 2 ︱nomb. of straightening rolls 7 ︱diam. of the rolls ca. 60 mm︱speed ca. 5 - 30 m/min.︱range of expansion ca. 445 - 530 mm︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱
          Complete conveyor system DREHER Straightening machine DREHER type 1675/7 B-FQ Execution: Rolls hardened and ground pneumatically liftable feed rollers Straightening rolls manually adjustable manual central lubrication lateral tape guide at the infeed Roller basket at the outlet Hand control unit for belt transfer Ultrasonic transmitter for loop control Double reel DREHER type: 2372 B-FPS Execution: Manual spreading using a hand crank pneumatic disc brake pneumatic pressure roller from above Roller feed DREHER type 1082 B Execution: Rolls hardened and ground pneumatically liftable top roller lateral tape guide with digital display Infeed roller basket Control: SIEMENS S7
            sheet width 0300 mm
            coil outside dia. 1600 mm
            weight max. in kg 2 x 2500 kg
            thickness of sheet ca. 0,60 - 3,00 mm
            feed rolls 2
            exit pinch rolls 2
            nomb. of straightening rolls 7
            diam. of the rolls ca. 60 mm
            speed ca. 5 - 30 m/min.
            range of expansion ca. 445 - 530 mm
            Description :
            Complete conveyor system DREHER

            Straightening machine DREHER type 1675/7 B-FQ
            Execution:
            Rolls hardened and ground
            pneumatically liftable feed rollers
            Straightening rolls manually adjustable
            manual central lubrication
            lateral tape guide at the infeed
            Roller basket at the outlet
            Hand control unit for belt transfer
            Ultrasonic transmitter for loop control

            Double reel DREHER type: 2372 B-FPS
            Execution:
            Manual spreading using a hand crank
            pneumatic disc brake
            pneumatic pressure roller from above

            Roller feed DREHER type 1082 B
            Execution:
            Rolls hardened and ground
            pneumatically liftable top roller
            lateral tape guide with digital display
            Infeed roller basket

            Control: SIEMENS S7
          Datasheet
          Request / Contact

          Decoiler - Double

          used  Decoiler - Double AMT HDR 2,0/1500


          • Frech GmbH
          • Werderstr. 82
          • 74889 Sinsheim
          • Deutschland

          • 0049-7261-1011
            0049-7261-63966
          • info@frech-maschinen.de
            www.frech-maschinen.de
          #1073-7746 · Decoiler - Double

          AMT - HDR 2,0/1500 - - 2011 -

          Technical details
          sheet width 0300 - 500 mm︱coil weight 2 x 2,00 t︱coil internal dia. 470 - 530 mm︱coil outside - diam. ca. 1500 mm︱0 2 - 30 U/min︱total power requirement 2 x 1,5 kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱
          - Manual spreading via handwheel - 12 bundle arms - Drive with three-phase gear motor (brake motor) LENZE - Loop control via proximity switch with time relay for on / off - Switch cabinet - Speed is set via potentiometer, with LENZE frequency converter
            sheet width 0300 - 500 mm
            coil weight 2 x 2,00 t
            coil internal dia. 470 - 530 mm
            coil outside - diam. ca. 1500 mm
            0 2 - 30 U/min
            total power requirement 2 x 1,5 kW
            Description :
            - Manual spreading via handwheel
            - 12 bundle arms
            - Drive with three-phase gear motor (brake motor) LENZE
            - Loop control via proximity switch with time relay for on / off
            - Switch cabinet
            - Speed is set via potentiometer, with LENZE frequency converter
          Datasheet
          Request / Contact

          Decoilers for Coils

          used  Decoilers for Coils WANZKE PM 1400


          • Frech GmbH
          • Werderstr. 82
          • 74889 Sinsheim
          • Deutschland

          • 0049-7261-1011
            0049-7261-63966
          • info@frech-maschinen.de
            www.frech-maschinen.de
          #1073-7747 · Decoilers for Coils

          WANZKE - PM 1400 - - 1997/CHECK 2021 -

          Technical details
          sheet width - max. 0570-700 mm︱coil weight 1,40 t︱coil internal dia. 420 - 520 mm︱coil outside - diam. ca. 1300 mm︱expansion mechanisch ︱0 14 U/min︱total power requirement 2,6 kW︱weight of the machine ca. 0,85 t︱dimensions of the machine ca. 1,50 x 1,20 x 2,50 m︱
          - with flange feed arms sheet width 570 mm - without front flange support arms sheet width 600 mm - jaw length 700 mm - Hydraulic pressure roller - Direction of tape travel from left to right - Mechanical expansion - Belt scanning via proximity switch in start / stop mode - incl. hydraulic unit and control panel - Operating instructions available The decoiler is functional and ready for immediate use.
            sheet width - max. 0570-700 mm
            coil weight 1,40 t
            coil internal dia. 420 - 520 mm
            coil outside - diam. ca. 1300 mm
            expansion mechanisch
            0 14 U/min
            total power requirement 2,6 kW
            weight of the machine ca. 0,85 t
            dimensions of the machine ca. 1,50 x 1,20 x 2,50 m
            Description :
            - with flange feed arms sheet width 570 mm
            - without front flange support arms sheet width 600 mm
            - jaw length 700 mm
            - Hydraulic pressure roller
            - Direction of tape travel from left to right
            - Mechanical expansion
            - Belt scanning via proximity switch in start / stop mode
            - incl. hydraulic unit and control panel
            - Operating instructions available

            The decoiler is functional and ready for immediate use.
          Datasheet
          Request / Contact
          used  Decoilers for Coils UNGERER


          • Frech GmbH
          • Werderstr. 82
          • 74889 Sinsheim
          • Deutschland

          • 0049-7261-1011
            0049-7261-63966
          • info@frech-maschinen.de
            www.frech-maschinen.de
          #1073-7262 · Decoilers for Coils

          UNGERER - - - 1993 -

          Technical details
          sheet width - max. 1800 mm︱coil weight 10,00 t︱coil internal dia. 508 mm︱coil external diameter 1800 mm︱working direction left - right ja / yes ︱range of expansion ca. 475 - 515 mm︱sheet thickness with Stahl / steel 4 mm︱sheet thickness with Aluminium 5 - 6 mm︱total power requirement kW︱weight of the machine ca. 9,0 t︱dimensions of the machine ca. 3,70 x 1,80 x 1,80 m︱
          Hydraulic snubber roll arm with hydraulic motor. Shifting movement for coil alignement +- 125 mm electric-hydraulic valves on board. Main Motor: It is installed a DC motor of power 10 kW plus gearbox ratio=1:25 + chain transmission ratio 1:2. Different motor and gearbox can be supplied according to the customer’s line speed. The decoiler is in excellent conditions and we have already checked the mandrel bearings. The snubber roll is new (polyurethane).
            sheet width - max. 1800 mm
            coil weight 10,00 t
            coil internal dia. 508 mm
            coil external diameter 1800 mm
            working direction left - right ja / yes
            range of expansion ca. 475 - 515 mm
            sheet thickness with Stahl / steel 4 mm
            sheet thickness with Aluminium 5 - 6 mm
            weight of the machine ca. 9,0 t
            dimensions of the machine ca. 3,70 x 1,80 x 1,80 m
            Description :
            Hydraulic snubber roll arm with hydraulic motor.
            Shifting movement for coil alignement +- 125 mm
            electric-hydraulic valves on board.

            Main Motor:
            It is installed a DC motor of power 10 kW plus gearbox ratio=1:25 + chain
            transmission ratio 1:2.
            Different motor and gearbox can be supplied according to the customer’s line
            speed.

            The decoiler is in excellent conditions and we have already checked
            the mandrel
            bearings. The snubber roll is new (polyurethane).

          Datasheet
          Request / Contact
          used  Decoilers for Coils SCHLEICHER HE-80-500


          • Frech GmbH
          • Werderstr. 82
          • 74889 Sinsheim
          • Deutschland

          • 0049-7261-1011
            0049-7261-63966
          • info@frech-maschinen.de
            www.frech-maschinen.de
          #1073-7740 · Decoilers for Coils

          SCHLEICHER - HE-80-500 - - 1989 -

          Technical details
          sheet width - max. 0350 mm︱coil weight 1,50 t︱coil internal dia. 360 - 440 mm︱coil outside - diam. ca. 1100 mm︱total power requirement kW︱weight of the machine ca. 0,38 t︱dimensions of the machine ca. 1,10 x 1,10 x 1,50 m︱
          Equipment: - 6 bundle feed arms - Jaw length: 500 mm - mechanical brake - Spreading: mechanical
            sheet width - max. 0350 mm
            coil weight 1,50 t
            coil internal dia. 360 - 440 mm
            coil outside - diam. ca. 1100 mm
            weight of the machine ca. 0,38 t
            dimensions of the machine ca. 1,10 x 1,10 x 1,50 m
            Description :
            Equipment:
            - 6 bundle feed arms
            - Jaw length: 500 mm
            - mechanical brake
            - Spreading: mechanical
          Datasheet
          Request / Contact
          used  Decoilers for Coils OBRU SAH / 5 M


          • Frech GmbH
          • Werderstr. 82
          • 74889 Sinsheim
          • Deutschland

          • 0049-7261-1011
            0049-7261-63966
          • info@frech-maschinen.de
            www.frech-maschinen.de
          #1073-7742 · Decoilers for Coils

          OBRU - SAH / 5 M - - 1975 / CHECK 2021 -

          Technical details
          sheet width - max. 0550 - 700 mm︱coil weight 2,00 t︱coil internal dia. 350 - 450 / 450 - 550 mm︱coil outside - diam. ca. 1200 mm︱expansion mechanisch ︱0 8-24 U/min︱total power requirement 1,50 kW︱weight of the machine ca. 1,20 t︱dimensions of the machine ca. 1,60 x 1,30 x 1,80 m︱
          - with flange feed arms 550 mm sheet width - Jaw width without collar support arms 700 mm - with top jaws, spreading range from 450 - 550 mm - with motorized brake - Left / right rotation - LENZE variable speed gearbox - Control system missing - test run via prov. Connection cable
            sheet width - max. 0550 - 700 mm
            coil weight 2,00 t
            coil internal dia. 350 - 450 / 450 - 550 mm
            coil outside - diam. ca. 1200 mm
            expansion mechanisch
            0 8-24 U/min
            total power requirement 1,50 kW
            weight of the machine ca. 1,20 t
            dimensions of the machine ca. 1,60 x 1,30 x 1,80 m
            Description :
            - with flange feed arms 550 mm sheet width
            - Jaw width without collar support arms 700 mm
            - with top jaws, spreading range from 450 - 550 mm
            - with motorized brake
            - Left / right rotation
            - LENZE variable speed gearbox
            - Control system missing - test run via prov. Connection cable
          Datasheet
          Request / Contact

          Folding Machine

          used  Folding Machine FASTI SCHROEDER 216 32-16


          • Frech GmbH
          • Werderstr. 82
          • 74889 Sinsheim
          • Deutschland

          • 0049-7261-1011
            0049-7261-63966
          • info@frech-maschinen.de
            www.frech-maschinen.de
          #1073-76291 · Folding Machine

          FASTI SCHROEDER - 216 32-16 - - 2011 -

          Technical details
          sheet width 3200 mm︱plate thickness 16,00 mm︱distance between columns mm︱upper beam stroke 500 mm︱bending beam adjustment 60 mm︱total power requirement kW︱weight of the machine ca. 20,00 t︱dimensions of the machine ca. 6,00 x 2,50 x 3,00 m︱
          ONLY 6800 OPERATING HOURS Furnishing - Motorized folding beam adjustment - Hydraulic upper tool clamping - CNC controlled crowning - CFP 120 touch screen control - Motor, rear stop 10-1500mm - Pointed rail 45 ° sharp Pointed rail 45 ° R10 - bending rail - Goat foot tool approx.R10 - documentation
            sheet width 3200 mm
            plate thickness 16,00 mm
            upper beam stroke 500 mm
            bending beam adjustment 60 mm
            weight of the machine ca. 20,00 t
            dimensions of the machine ca. 6,00 x 2,50 x 3,00 m
            Description :
            ONLY 6800 OPERATING HOURS

            Furnishing
            - Motorized folding beam adjustment
            - Hydraulic upper tool clamping
            - CNC controlled crowning
            - CFP 120 touch screen control
            - Motor, rear stop 10-1500mm
            - Pointed rail 45 ° sharp Pointed rail 45 ° R10
            - bending rail
            - Goat foot tool approx.R10
            - documentation


          Datasheet
          Request / Contact
          •   
          •   
          • 1  
          • 2  
          • 3  
          • 4  
          •   
          •   

            Trader Profile:   Frech GmbH

          Contact Trader



            Frech GmbH
           Werderstr. 82
            74889 Sinsheim
            Deutschland
            0049-7261-1011">0049-7261-1011
            0049-7261-63966
            info@frech-maschinen.de
            www.frech-maschinen.de

          Profile of Trader

          Founded in 1945 by Karl Frech and having Mrs Nicole Frech as its 3rd generation manager, the company can look back on over 60 years of business tradition in the town of Sinsheim near Heidelberg in the German Baden region. 

          Sinsheim is located on the A6 motorway, at a distance of an one hour drive on the motorway from the airports Frankfurt/Main and Stuttgart. FRECH GmbH is specialised in dealing with used equipment (decoilers, recoilers, roller levellers, coil-lines, roll forming lines, slitting lines, cut-to-length lines, cold rolling mills and roll grinders). 

          Furthermore the FRECH-Team is acting as an agent in the following fields of used machinery: coil-cars, folding machines, grinding machines, press brakes, presses, scrap-metal-coilers and shears. Contact us please !!! - we will help you also in other areas. In an area of about 1000 square metres of halls and retail floorspace we display a range of constantly varying second-hand machinery which are in proper working condition and, for the most part, fit for demonstration. 

          Why second-hand machinery? 

          Second-hand machines are most of the time immediately available and are ready for operation. Frech is your first address when you want to reduce your capital costs and increase your machinery’s economic efficiency. 

          Buying and selling second-hand machinery is a matter of trust – Frech is your best contact

          OUR CONTACTS




          Frech GmbH   74889 Sinsheim Werderstr. 82 Deutschland
          Frech GmbH

          Werderstr. 82



          Contact Trader


            Frech GmbH
           Werderstr. 82
            74889 Sinsheim
            Deutschland
            0049-7261-1011
            0049-7261-63966
            info@frech-maschinen.de
            www.frech-maschinen.de
            Contact person:

           




          Machine category


          Abkantpresse - hydraulisch · Abkantpresse - mechanisch · Abwickelhaspel · Abwickelhaspel - Doppel · Aufwickelhaspel · Blechbiegemaschine - 3 Walzen · Blechbiegemaschine - 4 Walzen · Coilanlage · Doppelständerpresse - Hydraulisch · Doppelständerziehpresse - Hydraulisch · Einständerexzenterpresse · Einständerpresse - Hydraulisch · Lochstanze · Längsteilanlage · Querteilanlage · Richtmaschine · Schwenkbiegemaschine · Stanzautomat · Tafelschere - hydraulisch · Tafelschere - mechanisch ·