European network of stockholding machinery dealers

Bitte einen Suchbegriff eingeben - Please enter a search term
Category:
    Manufacturer:
      Machines:
        Trader:

          Emuk Maschinenhandel GmbH - Stockist for used machines

          Machinelist:


          Center Lathe

          used  Center Lathe VDF-BOEHRINGER V 6


          • Emuk Maschinenhandel GmbH
          • Siemensstrasse 24
          • 76316 Malsch
          • Deutschland

          • +49 (0) 7246 943161
          • info@emuk.info
            www.emuk.info
          #2070-E23056 · Center Lathe

          VDF-BOEHRINGER - V 6 - - -

          Technical details
          turning diameter over bed 900 mm︱turning diameter over slide rest 600 mm︱turning length 3000 mm︱spindle turning speed range 11,2 - 560 U/min︱tool holder Multifix D1 ︱total power requirement 22 kW︱weight of the machine ca. 5,6 t︱dimensions of the machine ca. 5,6 x 1,8 x 1,7 m︱
          Safety-related conversion according to CE standard 2017 2011 new facing spindle, lock case partially renewed, lubrication after internal plan
            turning diameter over bed 900 mm
            turning diameter over slide rest 600 mm
            turning length 3000 mm
            spindle turning speed range 11,2 - 560 U/min
            tool holder Multifix D1
            total power requirement 22 kW
            weight of the machine ca. 5,6 t
            dimensions of the machine ca. 5,6 x 1,8 x 1,7 m
            Description :
            Safety-related conversion according to CE standard 2017
            2011 new facing spindle, lock case partially renewed, lubrication after
            internal plan
          Datasheet
          Request / Contact
          used  Center Lathe ERNAULT-SOMUA HN 350


          • Emuk Maschinenhandel GmbH
          • Siemensstrasse 24
          • 76316 Malsch
          • Deutschland

          • +49 (0) 7246 943161
          • info@emuk.info
            www.emuk.info
          #2070-E23044 · Center Lathe

          ERNAULT-SOMUA - HN 350 - - -

          Technical details
          turning diameter over bed 380 mm︱turning diameter over slide rest 250 mm︱turning length 600 mm︱turning speeds 90 - 1600 U/min︱centre height 200 mm︱total power requirement 4,2 kW︱weight of the machine ca. 1,3 t︱dimensions of the machine ca. 2,2 x 0,9 x 1,6 m︱
          Heidenhain digital readout.
            turning diameter over bed 380 mm
            turning diameter over slide rest 250 mm
            turning length 600 mm
            turning speeds 90 - 1600 U/min
            centre height 200 mm
            total power requirement 4,2 kW
            weight of the machine ca. 1,3 t
            dimensions of the machine ca. 2,2 x 0,9 x 1,6 m
            Description :
            Heidenhain digital readout.
          Datasheet
          Request / Contact

          CNC Lathe - Inclined Bed Type

          used  CNC Lathe - Inclined Bed Type GILDEMEISTER Twin 42


          • Emuk Maschinenhandel GmbH
          • Siemensstrasse 24
          • 76316 Malsch
          • Deutschland

          • +49 (0) 7246 943161
          • info@emuk.info
            www.emuk.info
          #2070-E23055 · CNC Lathe - Inclined Bed Type

          GILDEMEISTER - Twin 42 - - 2001 - Sinumerik 840 C

          Technical details
          turning diameter 120 mm︱turning length 650 mm︱control Sinumerik 840 C ︱swing diameter 250 mm︱spindle passage 42 mm︱spindle turning speed - stepless 35 - 7000 U/min︱number of tools 2 x 12 ︱total power requirement kW︱weight of the machine ca. 10,4 t︱dimensions of the machine ca. m︱
          CNC control Sinumerik 840D powerline main spindle: 6-jaw chuck sub spindle: 3-jaw chuck 2x 12-fold revolver driven tools 2x C-axis chip conveyor coolant device Technische Daten / technical details: max. Umlaufdurchmesser / max. rotary diameter 270 mm Spindelabstand / distance between spindles 900 mm Planweg X1/X2 / cross travel X1/X2 290/180 mm Längsweg Z1/Z2 / longitudinal travel Z1/Z2 650/650 mm Drehzahlbereich / spindle speed 4000 UpM / rpm Drehzahlbereich Gegenspindel / spindle speed opposed spindle 5000 UpM / rpm Drehzahl angetr. WKZ / speed of the driven tools 4000 UpM /rpm Werkzeugrevolver / turret head 2x 12 fach /holes Eilgang x/z / rapid feed x/z 30/30 m/min. Antriebsleistung Spindel 1,2 100% ED / drive capacity spindle 1,2 100% 41, 26 kW Gewicht der Maschine ca. / weight 10000 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding.
            turning diameter 120 mm
            turning length 650 mm
            control Sinumerik 840 C
            swing diameter 250 mm
            spindle passage 42 mm
            spindle turning speed - stepless 35 - 7000 U/min
            number of tools 2 x 12
            weight of the machine ca. 10,4 t
            Description :
            CNC control Sinumerik 840D powerline
            main spindle: 6-jaw chuck
            sub spindle: 3-jaw chuck
            2x 12-fold revolver
            driven tools
            2x C-axis
            chip conveyor
            coolant device

            Technische Daten / technical details:
            max. Umlaufdurchmesser / max. rotary diameter 270 mm
            Spindelabstand / distance between spindles 900 mm
            Planweg X1/X2 / cross travel X1/X2 290/180 mm
            Längsweg Z1/Z2 / longitudinal travel Z1/Z2 650/650 mm
            Drehzahlbereich / spindle speed 4000 UpM / rpm
            Drehzahlbereich Gegenspindel / spindle speed opposed spindle 5000 UpM /
            rpm
            Drehzahl angetr. WKZ / speed of the driven tools 4000 UpM /rpm
            Werkzeugrevolver / turret head 2x 12 fach /holes
            Eilgang x/z / rapid feed x/z 30/30 m/min.
            Antriebsleistung Spindel 1,2 100% ED / drive capacity spindle 1,2 100% 41,
            26 kW
            Gewicht der Maschine ca. / weight 10000 kg
            Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich -
            Technical data, accessories and description of the machine are not binding.

          Datasheet
          Request / Contact

          Machining Center - Horizontal

          used  Machining Center - Horizontal MORI SEIKI NH 5000-40


          • Emuk Maschinenhandel GmbH
          • Siemensstrasse 24
          • 76316 Malsch
          • Deutschland

          • +49 (0) 7246 943161
          • info@emuk.info
            www.emuk.info
          #2070-E23009 · Machining Center - Horizontal

          MORI SEIKI - NH 5000-40 - - 2005 - MSX 501

          Technical details
          x-travel 630 mm︱y-travel 600 mm︱z-travel 670 mm︱Control MSX 501 ︱spindle turning speed - stepless 14000 U/min︱tool taper BT 40 ︱pallet chang. with pallet turn. 360x1 degree 2 ︱max. workpiece weight 500 kg︱tool change unit 60 fach ︱table-size 500 x 500 mm︱total power requirement 56 kW︱weight of the machine ca. 11,8 t︱dimensions of the machine ca. 5,8 x 3,6 x 3,0 m︱
            x-travel 630 mm
            y-travel 600 mm
            z-travel 670 mm
            Control MSX 501
            spindle turning speed - stepless 14000 U/min
            tool taper BT 40
            pallet chang. with pallet turn. . 2
            max. workpiece weight 500 kg
            tool change unit 60 fach
            table-size 500 x 500 mm
            total power requirement 56 kW
            weight of the machine ca. 11,8 t
            dimensions of the machine ca. 5,8 x 3,6 x 3,0 m
          Datasheet
          Request / Contact

          Pillar Drilling Machine

          used  Pillar Drilling Machine GILLARDON GK 30 VE


          • Emuk Maschinenhandel GmbH
          • Siemensstrasse 24
          • 76316 Malsch
          • Deutschland

          • +49 (0) 7246 943161
          • info@emuk.info
            www.emuk.info
          #2070-E22079 · Pillar Drilling Machine

          GILLARDON - GK 30 VE - - 1989 -

          Technical details
          bore capacity in steel (diameter) 30 mm︱throat 300 mm︱bore stroke 150 mm︱cross-moving table 600 x 180 ︱total power requirement 1,5 kW︱weight of the machine ca. 1,1 t︱dimensions of the machine ca. 1,0 x 1,0 x 2,2 m︱
            bore capacity in steel (diameter. 30 mm
            throat 300 mm
            bore stroke 150 mm
            cross-moving table 600 x 180
            total power requirement 1,5 kW
            weight of the machine ca. 1,1 t
            dimensions of the machine ca. 1,0 x 1,0 x 2,2 m
          Datasheet
          Request / Contact

          Upright Drilling Machine

          used  Upright Drilling Machine ALZMETALL AB 35 S


          • Emuk Maschinenhandel GmbH
          • Siemensstrasse 24
          • 76316 Malsch
          • Deutschland

          • +49 (0) 7246 943161
          • info@emuk.info
            www.emuk.info
          #2070-E23059 · Upright Drilling Machine

          ALZMETALL - AB 35 S - - -

          Technical details
          bore capacity in steel (diameter) 35 mm︱throat 300 mm︱bore stroke 180 mm︱spindle turning speed - stepless 65 - 1750 U/min︱taper MK 4 ︱total power requirement 0,8 kW︱weight of the machine ca. 0,5 t︱dimensions of the machine ca. 0,8 x 0,6 x 1,8 m︱
            bore capacity in steel (diameter. 35 mm
            throat 300 mm
            bore stroke 180 mm
            spindle turning speed - stepless 65 - 1750 U/min
            taper MK 4
            total power requirement 0,8 kW
            weight of the machine ca. 0,5 t
            dimensions of the machine ca. 0,8 x 0,6 x 1,8 m
          Datasheet
          Request / Contact

          Knee-and-Column Milling Machine

          used  Knee-and-Column Milling Machine OERLIKON M08 V


          • Emuk Maschinenhandel GmbH
          • Siemensstrasse 24
          • 76316 Malsch
          • Deutschland

          • +49 (0) 7246 943161
          • info@emuk.info
            www.emuk.info
          #2070-E23010 · Knee-and-Column Milling Machine

          OERLIKON - M08 V - - 1973 -

          Technical details
          x-travel 900 mm︱y-travel 400 mm︱z-travel 500 mm︱table surface area 1300 x 350 mm︱quill stroke 180 mm︱total power requirement 6,4 kW︱weight of the machine ca. 3,4 t︱dimensions of the machine ca. 2,4 x 2,0 x 2,5 m︱
            x-travel 900 mm
            y-travel 400 mm
            z-travel 500 mm
            table surface area 1300 x 350 mm
            quill stroke 180 mm
            total power requirement 6,4 kW
            weight of the machine ca. 3,4 t
            dimensions of the machine ca. 2,4 x 2,0 x 2,5 m
          Datasheet
          Request / Contact

          Tool Room Milling Machine - Universal

          used  Tool Room Milling Machine - Universal DECKEL FP4 NC


          • Emuk Maschinenhandel GmbH
          • Siemensstrasse 24
          • 76316 Malsch
          • Deutschland

          • +49 (0) 7246 943161
          • info@emuk.info
            www.emuk.info
          #2070-E22073 · Tool Room Milling Machine - Universal

          DECKEL - FP4 NC - - 1985 -

          Technical details
          x-travel 600 mm︱y-travel 500 mm︱z-travel 500 mm︱spindle taper 40 SK︱turning speed range 18 - 6300 U/min︱paper band filter 515 mm︱table load 350 kg︱air temperature of the exhaust valve 0,001 mm︱rated capacity boring motor 3600 x 4900 mm︱hollow in the drive pipe 8 kW︱ 3300 kg︱ 475 kg︱total power requirement 380 50 23 kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱cooling system ︱cooling & used oil box ︱and control ︱operater manuals
          Machine from training workshop! ° Engine brake ° Safety handwheels ° 2 x emergency stop switches Accesories: * Rigid angle table * Coolant facility
            x-travel 600 mm
            y-travel 500 mm
            z-travel 500 mm
            spindle taper 40 SK
            turning speed range 18 - 6300 U/min
            paper band filter 515 mm
            table load 350 kg
            air temperature of the exhaust v. 0,001 mm
            rated capacity boring motor 3600 x 4900 mm
            hollow in the drive pipe 8 kW
            3300 kg
            475 kg
            total power requirement 380 50 23 kW
            Description :
            Machine from training workshop!
            ° Engine brake
            ° Safety handwheels
            ° 2 x emergency stop switches
            Accesories:
            * Rigid angle table
            * Coolant facility
          Datasheet
          Request / Contact
          used  Tool Room Milling Machine - Universal DECKEL FP 2 NC / DIALOG 11


          • Emuk Maschinenhandel GmbH
          • Siemensstrasse 24
          • 76316 Malsch
          • Deutschland

          • +49 (0) 7246 943161
          • info@emuk.info
            www.emuk.info
          #2070-E22074 · Tool Room Milling Machine - Universal

          DECKEL - FP 2 NC / DIALOG 11 - - 1984 -

          Technical details
          x-travel 300 mm︱y-travel 300 mm︱z-travel 400 mm︱CNC-control DIALOG 11 ︱spindle taper ISO 40 ︱spindle turning speed range 31 - 5.000 U/min︱table-size 620 x 390 mm︱table load 250 kg︱power capacity 5,5 kW︱feeds -stepless- 2 - 6.000 mm/min︱quill stroke 80 mm︱coolant ︱voltage 380 V︱total power requirement 11,0 kVA︱weight of the machine ca. 1,65 t︱dimensions of the machine ca. 1,85 x 1,90 x 1,80 m︱electric cabinet 1,35 x 0,70 x 1,70 m︱coolant tank 1,00 x 0,45 x 0,20 m︱
          Machine from training workshop! ° Engine brake ° Safety handwheels ° 2 x emergency stop switches Accesories: * Rigid angle table * Coolant facility
            x-travel 300 mm
            y-travel 300 mm
            z-travel 400 mm
            CNC-control DIALOG 11
            spindle taper ISO 40
            spindle turning speed range 31 - 5.000 U/min
            table-size 620 x 390 mm
            table load 250 kg
            power capacity 5,5 kW
            feeds -stepless- 2 - 6.000 mm/min
            quill stroke 80 mm
            voltage 380 V
            total power requirement 11,0 kVA
            weight of the machine ca. 1,65 t
            dimensions of the machine ca. 1,85 x 1,90 x 1,80 m
            electric cabinet 1,35 x 0,70 x 1,70 m
            coolant tank 1,00 x 0,45 x 0,20 m
            Description :
            Machine from training workshop!
            ° Engine brake
            ° Safety handwheels
            ° 2 x emergency stop switches
            Accesories:
            * Rigid angle table
            * Coolant facility
          Datasheet
          Request / Contact
          used  Tool Room Milling Machine - Universal DECKEL FP 2 NC / DIALOG 11


          • Emuk Maschinenhandel GmbH
          • Siemensstrasse 24
          • 76316 Malsch
          • Deutschland

          • +49 (0) 7246 943161
          • info@emuk.info
            www.emuk.info
          #2070-E22072 · Tool Room Milling Machine - Universal

          DECKEL - FP 2 NC / DIALOG 11 - - 1983 - Grundig Dialog 11

          Technical details
          x-travel 300 mm︱y-travel 300 mm︱z-travel 400 mm︱CNC-control DIALOG 11 ︱spindle taper ISO 40 ︱spindle turning speed range 31 - 5.000 U/min︱table-size 620 x 390 mm︱table load 250 kg︱power capacity 5,5 kW︱feeds -stepless- 2 - 6.000 mm/min︱quill stroke 80 mm︱voltage 380 V︱Control Grundig Dialog 11 ︱total power requirement 11,0 kVA︱weight of the machine ca. 1,65 t︱dimensions of the machine ca. 1,85 x 1,90 x 1,80 m︱
          Machine from training workshop! ° Engine brake ° Safety handwheels ° 2 x emergency stop switches Accesories: * Rigid angle table * Coolant facility
            x-travel 300 mm
            y-travel 300 mm
            z-travel 400 mm
            CNC-control DIALOG 11
            spindle taper ISO 40
            spindle turning speed range 31 - 5.000 U/min
            table-size 620 x 390 mm
            table load 250 kg
            power capacity 5,5 kW
            feeds -stepless- 2 - 6.000 mm/min
            quill stroke 80 mm
            voltage 380 V
            Control Grundig Dialog 11
            total power requirement 11,0 kVA
            weight of the machine ca. 1,65 t
            dimensions of the machine ca. 1,85 x 1,90 x 1,80 m
            Description :
            Machine from training workshop!
            ° Engine brake
            ° Safety handwheels
            ° 2 x emergency stop switches
            Accesories:
            * Rigid angle table
            * Coolant facility
          Datasheet
          Request / Contact

          Universal Milling Machine

          used  Universal Milling Machine KUNZMANN WF 4


          • Emuk Maschinenhandel GmbH
          • Siemensstrasse 24
          • 76316 Malsch
          • Deutschland

          • +49 (0) 7246 943161
          • info@emuk.info
            www.emuk.info
          #2070-E22063 · Universal Milling Machine

          KUNZMANN - WF 4 - - 1999 - HEIDENHAIN TNC 410

          Technical details
          x-travel 400 mm︱y-travel 320 mm︱z-travel 400 mm︱Control HEIDENHAIN TNC 410 ︱spindle turning speed - stepless 0 - 4000 U/min︱quill stroke 60 mm︱tool taper SK 40 ︱table surface area 650 x 350 mm︱total power requirement 6,5 kW︱weight of the machine ca. 1,8 t︱dimensions of the machine ca. 2,5 x 1,8 x 2,0 m︱
          Electric handwheel HR 410 Probe MP 11, automatic tool measurement TT 120 Cabin, tool holders,...
            x-travel 400 mm
            y-travel 320 mm
            z-travel 400 mm
            Control HEIDENHAIN TNC 410
            spindle turning speed - stepless 0 - 4000 U/min
            quill stroke 60 mm
            tool taper SK 40
            table surface area 650 x 350 mm
            total power requirement 6,5 kW
            weight of the machine ca. 1,8 t
            dimensions of the machine ca. 2,5 x 1,8 x 2,0 m
            Description :
            Electric handwheel HR 410
            Probe MP 11, automatic tool measurement TT 120
            Cabin, tool holders,...
          Datasheet
          Request / Contact
          used  Universal Milling Machine RECKERMANN FW 900 Pony


          • Emuk Maschinenhandel GmbH
          • Siemensstrasse 24
          • 76316 Malsch
          • Deutschland

          • +49 (0) 7246 943161
          • info@emuk.info
            www.emuk.info
          #2070-E23007 · Universal Milling Machine

          RECKERMANN - FW 900 Pony - - 1975 -

          Technical details
          x-travel 800 mm︱y-travel 300 mm︱z-travel 300 mm︱spindle turning speed range 32 - 2800 U/min︱weight of the machine ca. 2,3 t︱table surface area 900 x 300 mm︱spindle taper ISO SK 40 ︱total power requirement 5,5 kW︱
          Including Water round divider UTA 125 N. Including around 100 cutters.
            x-travel 800 mm
            y-travel 300 mm
            z-travel 300 mm
            spindle turning speed range 32 - 2800 U/min
            weight of the machine ca. 2,3 t
            table surface area 900 x 300 mm
            spindle taper ISO SK 40
            total power requirement 5,5 kW
            Description :
            Including Water round divider UTA 125 N.
            Including around 100 cutters.
          Datasheet
          Request / Contact
          used  Universal Milling Machine DECKEL FP 3 NC


          • Emuk Maschinenhandel GmbH
          • Siemensstrasse 24
          • 76316 Malsch
          • Deutschland

          • +49 (0) 7246 943161
          • info@emuk.info
            www.emuk.info
          #2070-E22048 · Universal Milling Machine

          DECKEL - FP 3 NC - - - Dialog 3

          Technical details
          x-travel 400 mm︱y-travel 400 mm︱z-travel 400 mm︱Control Dialog 3 ︱quill stroke 80 mm︱spindle turning speed - stepless 0 - 3150 U/min︱total power requirement kW︱weight of the machine ca. 1,6 t︱dimensions of the machine ca. 1,8 x 1,4 x 1,9 m︱
            x-travel 400 mm
            y-travel 400 mm
            z-travel 400 mm
            Control Dialog 3
            quill stroke 80 mm
            spindle turning speed - stepless 0 - 3150 U/min
            weight of the machine ca. 1,6 t
            dimensions of the machine ca. 1,8 x 1,4 x 1,9 m
          Datasheet
          Request / Contact

          Bevel Gear Generator - Spiral

          used  Bevel Gear Generator - Spiral GLEASON- PFAUTER 275 HC


          • Emuk Maschinenhandel GmbH
          • Siemensstrasse 24
          • 76316 Malsch
          • Deutschland

          • +49 (0) 7246 943161
          • info@emuk.info
            www.emuk.info
          #2070-E23021 · Bevel Gear Generator - Spiral

          GLEASON- PFAUTER - 275 HC - - 2001 -

          Technical details
          max. wheel diameter 275 mm︱gear width 58 mm︱max. module 10 ︱min. module 0,5 ︱b-axis -5/90 °︱turning speeds 1200 U/min︱total power requirement kW︱weight of the machine ca. 10 t︱dimensions of the machine ca. 3,0 x 2,5 x 2,6 m︱
            max. wheel diameter 275 mm
            gear width 58 mm
            max. module 10
            min. module 0,5
            b-axis -5/90 °
            turning speeds 1200 U/min
            weight of the machine ca. 10 t
            dimensions of the machine ca. 3,0 x 2,5 x 2,6 m
          Datasheet
          Request / Contact

          Bevel Gear Shaping Machine

          used  Bevel Gear Shaping Machine H & H 60 HS 3


          • Emuk Maschinenhandel GmbH
          • Siemensstrasse 24
          • 76316 Malsch
          • Deutschland

          • +49 (0) 7246 943161
          • info@emuk.info
            www.emuk.info
          #2070-E2061 · Bevel Gear Shaping Machine

          H & H - 60 HS 3 - - -

          Technical details
          max. wheel diameter 25 / 600 mm︱gear width 0 -90 mm︱max. module 10 ︱min. module 1,5 ︱min/max. pitch cone angle 5 - 90 °︱tooth length 90 mm︱stroke 0 - 100 mm︱total power requirement 7,5 kW︱weight of the machine ca. 6,1 t︱dimensions of the machine ca. 3,0 x 2,4 x 1,8 m︱
          Equipment: Change gears, planer knives, setting devices, clamping devices, ...
            max. wheel diameter 25 / 600 mm
            gear width 0 -90 mm
            max. module 10
            min. module 1,5
            min/max. pitch cone angle 5 - 90 °
            tooth length 90 mm
            stroke 0 - 100 mm
            total power requirement 7,5 kW
            weight of the machine ca. 6,1 t
            dimensions of the machine ca. 3,0 x 2,4 x 1,8 m
            Description :
            Equipment:
            Change gears, planer knives, setting devices, clamping devices, ...
          Datasheet
          Request / Contact

          Gear Grinding Machine

          used  Gear Grinding Machine REISHAUER RZ 150


          • Emuk Maschinenhandel GmbH
          • Siemensstrasse 24
          • 76316 Malsch
          • Deutschland

          • +49 (0) 7246 943161
          • info@emuk.info
            www.emuk.info
          #2070-E23065 · Gear Grinding Machine

          REISHAUER - RZ 150 - - 2004 - Siemens 840 D

          Technical details
          max. wheel diameter 150 mm︱gear width 100 mm︱max. module 3 ︱min. module 0,5 ︱Control Siemens 840 D ︱spindle turning speed - stepless 0 - 5200 U/min︱x-axis 190 mm︱y-axis 160 mm︱z-axis 100 mm︱work piece spindle speed 0 - 1000 U/min︱max.helical angle +/- 40 °︱total power requirement 36 kW︱weight of the machine ca. 8,5 t︱dimensions of the machine ca. 3,5 x 2,5 x 2,8 m︱
            max. wheel diameter 150 mm
            gear width 100 mm
            max. module 3
            min. module 0,5
            Control Siemens 840 D
            spindle turning speed - stepless 0 - 5200 U/min
            x-axis 190 mm
            y-axis 160 mm
            z-axis 100 mm
            work piece spindle speed 0 - 1000 U/min
            max.helical angle +/- 40 °
            total power requirement 36 kW
            weight of the machine ca. 8,5 t
            dimensions of the machine ca. 3,5 x 2,5 x 2,8 m
          Datasheet
          Request / Contact
          used  Gear Grinding Machine KAPP KX 1


          • Emuk Maschinenhandel GmbH
          • Siemensstrasse 24
          • 76316 Malsch
          • Deutschland

          • +49 (0) 7246 943161
          • info@emuk.info
            www.emuk.info
          #2070-E23001 · Gear Grinding Machine

          KAPP - KX 1 - - 2003 - Siemens 840 D

          Technical details
          max. wheel diameter 220 mm︱gear width 150 mm︱max. module 5 ︱min. module 0,5 ︱number of teeth 1 - 999 ︱max.helical angle +/- 35 °︱pitch 0,1 - unendlich mm︱x-axis 350 mm︱y-axis 120 mm︱z-axis 140 mm︱b-axis -110 / 60 °︱c-axis 360 ︱table (Z-axis) 360 .︱control Siemens 840 D ︱total power requirement 66 kW︱weight of the machine ca. 13,5 t︱dimensions of the machine ca. 7,0 x 4,9 x 2,5 m︱
          6 axis-machine, including Felsomat loading unit.
            max. wheel diameter 220 mm
            gear width 150 mm
            max. module 5
            min. module 0,5
            number of teeth 1 - 999
            max.helical angle +/- 35 °
            pitch 0,1 - unendlich mm
            x-axis 350 mm
            y-axis 120 mm
            z-axis 140 mm
            b-axis -110 / 60 °
            c-axis 360
            table (Z-axis) 360 .
            control Siemens 840 D
            total power requirement 66 kW
            weight of the machine ca. 13,5 t
            dimensions of the machine ca. 7,0 x 4,9 x 2,5 m
            Description :
            6 axis-machine, including Felsomat loading unit.
          Datasheet
          Request / Contact

          Gear Hobbing Machine - Horizontal

          used  Gear Hobbing Machine - Horizontal GLEASON- PFAUTER P 60


          • Emuk Maschinenhandel GmbH
          • Siemensstrasse 24
          • 76316 Malsch
          • Deutschland

          • +49 (0) 7246 943161
          • info@emuk.info
            www.emuk.info
          #2070-E23022 · Gear Hobbing Machine - Horizontal

          GLEASON- PFAUTER - P 60 - - 2002 -

          Technical details
          max. wheel diameter 65 mm︱gear width 140 mm︱max. module 3 ︱min. module 0,5 ︱total power requirement kW︱weight of the machine ca. 4,8 t︱dimensions of the machine ca. 3,0 x 2,1 x 2,3 m︱
            max. wheel diameter 65 mm
            gear width 140 mm
            max. module 3
            min. module 0,5
            weight of the machine ca. 4,8 t
            dimensions of the machine ca. 3,0 x 2,1 x 2,3 m
          Datasheet
          Request / Contact

          Gear Honing Machine

          used  Gear Honing Machine FAESSLER D 250 C


          • Emuk Maschinenhandel GmbH
          • Siemensstrasse 24
          • 76316 Malsch
          • Deutschland

          • +49 (0) 7246 943161
          • info@emuk.info
            www.emuk.info
          #2070-E22059 · Gear Honing Machine

          FAESSLER - D 250 C - - 1991 -

          Technical details
          workpiece diameter 250 mm︱centre distance 450 mm︱honing length max. 300 mm︱total power requirement kW︱weight of the machine ca. 2,5 t︱dimensions of the machine ca. 4,0 x 2,8 x 2,0 m︱
            workpiece diameter 250 mm
            centre distance 450 mm
            honing length max. 300 mm
            weight of the machine ca. 2,5 t
            dimensions of the machine ca. 4,0 x 2,8 x 2,0 m
          Datasheet
          Request / Contact

          Gear Shaping Machine

          used  Gear Shaping Machine LORENZ SV 00


          • Emuk Maschinenhandel GmbH
          • Siemensstrasse 24
          • 76316 Malsch
          • Deutschland

          • +49 (0) 7246 943161
          • info@emuk.info
            www.emuk.info
          #2070-E22022 · Gear Shaping Machine

          LORENZ - SV 00 - - -

          Technical details
          max. wheel diameter 180 mm︱gear width 50 mm︱max. module 4 ︱min. module 0,5 ︱total power requirement kW︱weight of the machine ca. 2,1 t︱dimensions of the machine ca. 1,3 x 1,2 x 1,9 m︱
            max. wheel diameter 180 mm
            gear width 50 mm
            max. module 4
            min. module 0,5
            weight of the machine ca. 2,1 t
            dimensions of the machine ca. 1,3 x 1,2 x 1,9 m
          Datasheet
          Request / Contact
          used  Gear Shaping Machine LORENZ SN 5


          • Emuk Maschinenhandel GmbH
          • Siemensstrasse 24
          • 76316 Malsch
          • Deutschland

          • +49 (0) 7246 943161
          • info@emuk.info
            www.emuk.info
          #2070-E2089 · Gear Shaping Machine

          LORENZ - SN 5 - - -

          Technical details
          max. wheel diameter 500 mm︱gear width 75 mm︱max. module 5 ︱min. module 0,5 ︱no. of strokes 45 - 424 Hub/min︱total power requirement 6 kW︱weight of the machine ca. 3,6 t︱dimensions of the machine ca. 2,0 x 1,4 x 2,3 m︱
          Rapid traverse in the table.
            max. wheel diameter 500 mm
            gear width 75 mm
            max. module 5
            min. module 0,5
            no. of strokes 45 - 424 Hub/min
            total power requirement 6 kW
            weight of the machine ca. 3,6 t
            dimensions of the machine ca. 2,0 x 1,4 x 2,3 m
            Description :
            Rapid traverse in the table.
          Datasheet
          Request / Contact
          used  Gear Shaping Machine LORENZ S8 / 630


          • Emuk Maschinenhandel GmbH
          • Siemensstrasse 24
          • 76316 Malsch
          • Deutschland

          • +49 (0) 7246 943161
          • info@emuk.info
            www.emuk.info
          #2070-E22008 · Gear Shaping Machine

          LORENZ - S8 / 630 - - -

          Technical details
          max. wheel diameter 630 mm︱gear width 180 mm︱max. module 8 ︱min. module 1 ︱table bore diameter 160 mm︱no. of strokes 47 - 300 Hub/min︱dia. of shaper cutter 125 mm︱dayligth 100 - 330 mm︱workpiece diameter 0 - 750 mm︱stroke length max. 200 mm︱total power requirement 12 kW︱weight of the machine ca. 5,8 t︱dimensions of the machine ca. 2,5 x 2,1 x 3,1 m︱
          The design of the LORENZ S8 represents a further development of model S7/500, which was successful over many years. A considerable increase in driving power, reinforced cast iron bodies and gearing units, easy service by push button-control, automatic change of stroke speed as well as circulation system lubrication for all moving parts correspond to the demands of a modern gear cutting machine. The machine is suitable for internal- and external gears. The capacity has been adapted to experience and has been extended to the following maximum values. Raizor block 150 mm, table clamping, tailstock, chip conveyor, change gears, manuals,toolholders, ....
            max. wheel diameter 630 mm
            gear width 180 mm
            max. module 8
            min. module 1
            table bore diameter 160 mm
            no. of strokes 47 - 300 Hub/min
            dia. of shaper cutter 125 mm
            dayligth 100 - 330 mm
            workpiece diameter 0 - 750 mm
            stroke length max. 200 mm
            total power requirement 12 kW
            weight of the machine ca. 5,8 t
            dimensions of the machine ca. 2,5 x 2,1 x 3,1 m
            Description :
            The design of the LORENZ S8 represents a further development of model S7/500,
            which was successful over many years.
            A considerable increase in driving power, reinforced cast iron bodies and
            gearing units, easy service by push button-control, automatic change of stroke
            speed as well as circulation system lubrication for all moving parts correspond
            to the demands of a modern gear cutting machine.
            The machine is suitable for internal- and external gears. The capacity has been
            adapted to experience and has been extended to the following maximum values.
            Raizor block 150 mm, table clamping, tailstock, chip conveyor, change gears,
            manuals,toolholders, ....
          Datasheet
          Request / Contact
          used  Gear Shaping Machine LORENZ SNJ 5


          • Emuk Maschinenhandel GmbH
          • Siemensstrasse 24
          • 76316 Malsch
          • Deutschland

          • +49 (0) 7246 943161
          • info@emuk.info
            www.emuk.info
          #2070-E22066 · Gear Shaping Machine

          LORENZ - SNJ 5 - - -

          Technical details
          max. wheel diameter 500 mm︱gear width 75 mm︱max. module 5 ︱min. module 0,5 ︱no. of strokes 45 - 424 Hub/min︱total power requirement 6 kW︱weight of the machine ca. 3,6 t︱dimensions of the machine ca. 2,0 x 1,4 x 2,3 m︱
          Rapid traverse in the table.
            max. wheel diameter 500 mm
            gear width 75 mm
            max. module 5
            min. module 0,5
            no. of strokes 45 - 424 Hub/min
            total power requirement 6 kW
            weight of the machine ca. 3,6 t
            dimensions of the machine ca. 2,0 x 1,4 x 2,3 m
            Description :
            Rapid traverse in the table.
          Datasheet
          Request / Contact

          Gear Testing Machine

          used  Gear Testing Machine HOEFLER EMZ 632


          • Emuk Maschinenhandel GmbH
          • Siemensstrasse 24
          • 76316 Malsch
          • Deutschland

          • +49 (0) 7246 943161
          • info@emuk.info
            www.emuk.info
          #2070-E23051 · Gear Testing Machine

          HOEFLER - EMZ 632 - - überarbeitet 2023 - Zeiss

          Technical details
          max. wheel diameter 5 - 630 mm︱gear width 500 mm︱max. module 20 ︱min. module 0,5 ︱workpiece weight 350 kg︱Control Zeiss ︱max. workpiece diameter 630 mm︱clamping length 1050 mm︱total power requirement 1,8 kW︱weight of the machine ca. 2,5 t︱dimensions of the machine ca. 2,0 x 0,7 x 2,4 m︱
          Spur gear software for internal and external gearing Profile inspection standard crowning head - root relief K - profile Direction test standard crowning head - root relief K - profile graduation test Axis position correction for on-the-fly measurements up to 0.2 mm axis position error Snail software (cone software for an extra charge) 3 carriers for gears, 1 carrier block, calibration device, Win10
            max. wheel diameter 5 - 630 mm
            gear width 500 mm
            max. module 20
            min. module 0,5
            workpiece weight 350 kg
            Control Zeiss
            max. workpiece diameter 630 mm
            clamping length 1050 mm
            total power requirement 1,8 kW
            weight of the machine ca. 2,5 t
            dimensions of the machine ca. 2,0 x 0,7 x 2,4 m
            Description :
            Spur gear software for internal and external gearing
            Profile inspection standard crowning head - root relief K - profile
            Direction test standard crowning head - root relief K - profile
            graduation test
            Axis position correction for on-the-fly measurements up to 0.2 mm axis position
            error
            Snail software (cone software for an extra charge)
            3 carriers for gears, 1 carrier block, calibration device, Win10
          Datasheet
          Request / Contact
          •   
          •   
          • 1  
          • 2  
          • 3  
          • 4  
          •   
          •   

          Emuk Maschinenhandel GmbH   76316 - Malsch Siemensstrasse 24 Deutschland
          Emuk Maschinenhandel GmbH

          Siemensstrasse 24



          Contact Trader


            Emuk Maschinenhandel GmbH
           Siemensstrasse 24
            76316 - Malsch
            Deutschland
            +49 (0) 7246 943161
           
            info@emuk.info
            www.emuk.info
            Contact person:

           




          Machine category


          Bandsäge - Automatisch · Bandsäge - Vertikal · Bearbeitungszentrum - Horizontal · Bügelsäge - Automatisch · CNC Drehmaschine - Schrägbettmaschine · Doppelschleifbock · Einständer - Richtpresse · Elektro - Hubwagen · Endenbearbeitungsmaschine · Erodiermaschine · Filteranlage · Flachschleifmaschine - Horizontal · Fräser · Fräsmaschine - Universal · Frässtichel-Schleifmaschine · Gabelstapler Elektro · Gewinde-Schnecken-Schleifmaschine · Gewindeschleifmaschine · Innen- und Planschleifmaschine · Kaltkreissäge · Kantenschleifmaschine · Kegelradfräsmaschine-Bogenverzahnung · Kegelradhobelmaschine · Konsolfräsmaschine · Koordinatenschleifmaschine · Kreissägenschärfmaschine · Kurzhobler · Kühlmittelanlage · Langgewinde- und Abwälzfräsmaschine · Leit- und Zugspindeldrehmaschine · Magnetbandförderer · Messerschleifmaschine · Messmaschine · Notstromaggregat · Rundlaufprüfgerät · Rundschleifmaschine - Außen · Rundschleifmaschine - Universal · Schleifscheibe · Schleifscheibenprofiliergerät · Stanzautomat · Stoßmaschine - Vertikal · Ständerbohrmaschine · Superfinishmaschine · Säulenbohrmaschine · Waschanlage - Manuell · Werkzeugfräsmaschine - Universal · Werkzeugschleifmaschine · Wälzfräserschärfmaschine · Zahnrad-Abwälzfräsmaschine - horizontal · Zahnradhonmaschine · Zahnradprüfmaschine · Zahnradschleifmaschine · Zahnradstossmaschine · Zahnstangenfräsmaschine · Zahnstangenstossmaschine · Zentrumschleifmaschine ·