European network of stockholding machinery dealers

Bitte einen Suchbegriff eingeben - Please enter a search term
Category:
    Manufacturer:
      Machines:
        Trader:

          Sheet metal working - shaeres - bending

          Machinelist: Sheet metal working / shaeres / bending


          Folding Machine

          used Sheet metal working / shaeres / bending Folding Machine EHT MULTISWING 4-32


          • A + B Werkzeuge Maschinen Handels GmbH
          • Rottweg 17
          • 48683 Ahaus
          • Deutschland

          • (0049)-2561-9384-71
            (0049)-2561-9384-36
          • info@ab-maschinen.de
            www.ab-maschinen.de
          #1008-9355199 · Folding Machine

          EHT - MULTISWING 4-32 - - 1998 -

          Technical details
          sheet width 3200 mm︱plate thickness 4,0 mm︱distance between columns 3300 mm︱daylight opening OW 400 mm︱adjustment UW 80 mm︱pivoting angle 180 Grad︱clamping capacity max. 200 KN︱air pressure - required 4.5 - 6.0 bar︱total power requirement 9,8 kW︱oil volume 160 l︱weight 8500 kg︱range L-W-H 4550 x 2530 x 2275 mm︱
          ** well-maintained machine with lots of special accessories (!!) ** last maintenance/test in JUNE 2023 Furnishing: - CNC screen control CYBELEC model DNC-884-PP32 * Swivel control panel, front right - CNC controlled / electro-motorized back gauge * pneumatic / lowerable material stop fingers * Adjustment speed max. 250 mm/sec. * Drive power 0.5 kw * Sheet metal support table at the back - motorized lower beam adjustment (S axis) * Adjustment range max. 80.0 mm - hydraulic swivel movement of the lower beam - hydraulic movement of the upper beam * Adjustment range max. 400 mm * Lifting speed from .. max. 60.0 mm/sec. * Lifting speed to .. max. 115 mm/sec. - pneumatic upper tool clamping - pneumatic lower tool clamping - front protection device (swivel range) - 1x freely movable double foot switch - original operating instructions including electrical circuit diagram + hydraulic diagram **Special accessories included: - 1x split set EHT Geißfuß upper tool.. Height = 231 mm * 231 x 110 mm - hardened - 30° degrees - 1x split set EHT Geißfuß upper tool.. Height = 144 mm * 144 x 110 mm - hardened - 30° degrees - 1x split set of EHT pointed/upper tools.. Height = 32.0 mm * 32 x 110 mm - hardened - 30° degrees - 1x split set EHT lower tool .. width = 15.0 mm * 68.5 x 20 mm - Radius 1.0 mm - 1x split set EHT lower tool .. width = 30.0 mm * 68.5 x 30 mm - Radius 1.0 mm - 1x EHT extension for the backgauge * Machine link: http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9355199
            sheet width 3200 mm
            plate thickness 4,0 mm
            distance between columns 3300 mm
            daylight opening OW 400 mm
            adjustment UW 80 mm
            pivoting angle 180 Grad
            clamping capacity max. 200 KN
            air pressure - required 4.5 - 6.0 bar
            total power requirement 9,8 kW
            oil volume 160 l
            weight 8500 kg
            range L-W-H 4550 x 2530 x 2275 mm
            Description :
            ** well-maintained machine with lots of special accessories (!!)
            ** last maintenance/test in JUNE 2023

            Furnishing:
            - CNC screen control CYBELEC model DNC-884-PP32
            * Swivel control panel, front right
            - CNC controlled / electro-motorized back gauge
            * pneumatic / lowerable material stop fingers
            * Adjustment speed max. 250 mm/sec.
            * Drive power 0.5 kw
            * Sheet metal support table at the back
            - motorized lower beam adjustment (S axis)
            * Adjustment range max. 80.0 mm
            - hydraulic swivel movement of the lower beam
            - hydraulic movement of the upper beam
            * Adjustment range max. 400 mm
            * Lifting speed from .. max. 60.0 mm/sec.
            * Lifting speed to .. max. 115 mm/sec.
            - pneumatic upper tool clamping
            - pneumatic lower tool clamping
            - front protection device (swivel range)
            - 1x freely movable double foot switch
            - original operating instructions including electrical circuit diagram +
            hydraulic diagram

            **Special accessories included:
            - 1x split set EHT Geißfuß upper tool.. Height = 231 mm
            * 231 x 110 mm - hardened - 30° degrees
            - 1x split set EHT Geißfuß upper tool.. Height = 144 mm
            * 144 x 110 mm - hardened - 30° degrees
            - 1x split set of EHT pointed/upper tools.. Height = 32.0 mm
            * 32 x 110 mm - hardened - 30° degrees
            - 1x split set EHT lower tool .. width = 15.0 mm
            * 68.5 x 20 mm - Radius 1.0 mm
            - 1x split set EHT lower tool .. width = 30.0 mm
            * 68.5 x 30 mm - Radius 1.0 mm
            - 1x EHT extension for the backgauge

            * Machine link:
            http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9355199


        • A + B Werkzeuge Maschinen Handels GmbH
        • Rottweg 17
        • 48683 Ahaus
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Folding Machine EHT MULTISWING 4-32


          • Frech GmbH
          • Werderstr. 82
          • 74889 Sinsheim
          • Deutschland

          • 0049-7261-1011
            0049-7261-63966
          • info@frech-maschinen.de
            www.frech-maschinen.de
          #1073-76548 · Folding Machine

          EHT - MULTISWING 4-32 - - 1998 -

          Technical details
          sheet width 3200 mm︱plate thickness 4,00 mm︱distance between columns 3300 mm︱daylight opening OW 400 mm︱adjustment UW 80 mm︱pivoting angle 180 Grad︱clamping capacity max. 200 KN︱air pressure - required 4.5 - 6.0 bar︱total power requirement 9,8 kW︱oil volume 160 l︱weight 8500 kg︱range L-W-H 4550 x 2530 x 2275 mm︱
          ** well-maintained machine with lots of special accessories (!!) ** last maintenance/test in JUNE 2023 Furnishing: - CNC screen control CYBELEC model DNC-884-PP32 * Swivel control panel, front right - CNC controlled / electro-motorized back gauge * pneumatic / lowerable material stop fingers * Adjustment speed max. 250 mm/sec. * Drive power 0.5 kw * Sheet metal support table at the back - motorized lower beam adjustment (S axis) * Adjustment range max. 80.0 mm - hydraulic swivel movement of the lower beam - hydraulic movement of the upper beam * Adjustment range max. 400 mm * Lifting speed from .. max. 60.0 mm/sec. * Lifting speed to .. max. 115 mm/sec. - pneumatic upper tool clamping - pneumatic lower tool clamping - front protection device (swivel range) - 1x freely movable double foot switch - original operating instructions including electrical circuit diagram + hydraulic diagram **Special accessories included: - 1x split set EHT Geißfuß upper tool.. Height = 231 mm * 231 x 110 mm - hardened - 30° degrees - 1x split set EHT Geißfuß upper tool.. Height = 144 mm * 144 x 110 mm - hardened - 30° degrees - 1x split set of EHT pointed/upper tools.. Height = 32.0 mm * 32 x 110 mm - hardened - 30° degrees - 1x split set EHT lower tool .. width = 15.0 mm * 68.5 x 20 mm - Radius 1.0 mm - 1x split set EHT lower tool .. width = 30.0 mm * 68.5 x 30 mm - Radius 1.0 mm - 1x EHT extension for the backgauge
            sheet width 3200 mm
            plate thickness 4,00 mm
            distance between columns 3300 mm
            daylight opening OW 400 mm
            adjustment UW 80 mm
            pivoting angle 180 Grad
            clamping capacity max. 200 KN
            air pressure - required 4.5 - 6.0 bar
            total power requirement 9,8 kW
            oil volume 160 l
            weight 8500 kg
            range L-W-H 4550 x 2530 x 2275 mm
            Description :
            ** well-maintained machine with lots of special accessories (!!)
            ** last maintenance/test in JUNE 2023

            Furnishing:
            - CNC screen control CYBELEC model DNC-884-PP32
            * Swivel control panel, front right
            - CNC controlled / electro-motorized back gauge
            * pneumatic / lowerable material stop fingers
            * Adjustment speed max. 250 mm/sec.
            * Drive power 0.5 kw
            * Sheet metal support table at the back
            - motorized lower beam adjustment (S axis)
            * Adjustment range max. 80.0 mm
            - hydraulic swivel movement of the lower beam
            - hydraulic movement of the upper beam
            * Adjustment range max. 400 mm
            * Lifting speed from .. max. 60.0 mm/sec.
            * Lifting speed to .. max. 115 mm/sec.
            - pneumatic upper tool clamping
            - pneumatic lower tool clamping
            - front protection device (swivel range)
            - 1x freely movable double foot switch
            - original operating instructions including electrical circuit diagram +
            hydraulic diagram

            **Special accessories included:
            - 1x split set EHT Geißfuß upper tool.. Height = 231 mm
            * 231 x 110 mm - hardened - 30° degrees
            - 1x split set EHT Geißfuß upper tool.. Height = 144 mm
            * 144 x 110 mm - hardened - 30° degrees
            - 1x split set of EHT pointed/upper tools.. Height = 32.0 mm
            * 32 x 110 mm - hardened - 30° degrees
            - 1x split set EHT lower tool .. width = 15.0 mm
            * 68.5 x 20 mm - Radius 1.0 mm
            - 1x split set EHT lower tool .. width = 30.0 mm
            * 68.5 x 30 mm - Radius 1.0 mm
            - 1x EHT extension for the backgauge




        • Frech GmbH
        • Werderstr. 82
        • 74889 Sinsheim
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Folding Machine EHT EHP 15-35 2H500


          • Kurt Steiger Werkzeugmaschinen GmbH
          • Flachstr. 11
          • 65197 Wiesbaden
          • Deutschland

          • +49 (0) 611/421047
            +49 (0) 611/421040
          • info@kurt-steiger.de
            www.kurt-steiger.de
          #2043-24893 · Folding Machine

          EHT - EHP 15-35 2H500 - - 1983 -

          Technical details
          chamfer lenght mm︱plate thickness mm︱distance between columns mm︱total power requirement kW︱weight of the machine ca. t︱required space m︱
          pression: 150 t
          working width: 4500 mm
          Msnezk
          clear support width: 3050 mm
          support throat: 300 mm
          rear stop: 1000 mm
          electrical connection: 380 V, 18,5 kW
          weight: 14,8 t
          space needed: 4200 x 2000 x 3000/3150 mm
            Description :
            pression: 150 t

            working width: 4500 mm

            Msnezk

            clear support width: 3050 mm

            support throat: 300 mm

            rear stop: 1000 mm

            electrical connection: 380 V, 18,5 kW

            weight: 14,8 t

            space needed: 4200 x 2000 x 3000/3150 mm


        • Kurt Steiger Werkzeugmaschinen GmbH
        • Flachstr. 11
        • 65197 Wiesbaden
        • Deutschland

        • Datasheet
          Request / Contact

          Hydr. pressbrake

          used Sheet metal working / shaeres / bending Hydr. pressbrake EHT TruBend 8170-40


          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland

          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-4021033 · Hydr. pressbrake

          EHT - TruBend 8170-40 - - 2007 - CYBELEC ModEva 10S

          Technical details
          pressure 170 t︱chamfer lenght 4050 mm︱distance between columns 3550 mm︱control CYBELEC ModEva 10S ︱column arm 405 mm︱stroke of ram 400 mm︱distance between table / ram 320/720 mm︱control voltage 24 kW︱quantity of oil 350 l︱total power requirement 27,5 kW︱weight of the machine ca. 14800 kg︱
            pressure 170 t
            chamfer lenght 4050 mm
            distance between columns 3550 mm
            control CYBELEC ModEva 10S
            column arm 405 mm
            stroke of ram 400 mm
            distance between table / ram 320/720 mm
            control voltage 24 kW
            quantity of oil 350 l
            total power requirement 27,5 kW
            weight of the machine ca. 14800 kg


        • Bästlein
        • Augsburger Str. 56
        • 89312 Günzburg
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Hydr. pressbrake EHT Multipress 135-30


          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland

          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-4021148 · Hydr. pressbrake

          EHT - Multipress 135-30 - - 2003 -

          Technical details
          pressure 135 t︱chamfer lenght 3050 mm︱distance between columns 2550 mm︱stroke 250 mm︱quantity of oil 300 l︱frequency 50 Hz︱ 63 A︱voltage 3 x 400 V︱total power requirement 21,5 kW︱weight of the machine ca. 11260 Kg︱
            pressure 135 t
            chamfer lenght 3050 mm
            distance between columns 2550 mm
            stroke 250 mm
            quantity of oil 300 l
            frequency 50 Hz
            63 A
            voltage 3 x 400 V
            total power requirement 21,5 kW
            weight of the machine ca. 11260 Kg


        • Bästlein
        • Augsburger Str. 56
        • 89312 Günzburg
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Hydr. pressbrake EHT MultiPress 175-40


          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland

          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-4021151 · Hydr. pressbrake

          EHT - MultiPress 175-40 - - 2002 -

          Technical details
          pressure 175 t︱chamfer lenght 4050 mm︱distance between columns 3550 mm︱column arm 405 mm︱table height 900 mm︱max. ram stroke 400 mm︱oil volume 320 l︱voltage 3x400 V︱control voltage 24 V︱ 80 A︱dimensions 4600x2000x3400 mm︱total power requirement 18,5 kW︱weight of the machine ca. 14800 kg︱
            pressure 175 t
            chamfer lenght 4050 mm
            distance between columns 3550 mm
            column arm 405 mm
            table height 900 mm
            max. ram stroke 400 mm
            oil volume 320 l
            voltage 3x400 V
            control voltage 24 V
            80 A
            dimensions 4600x2000x3400 mm
            total power requirement 18,5 kW
            weight of the machine ca. 14800 kg


        • Bästlein
        • Augsburger Str. 56
        • 89312 Günzburg
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Hydr. pressbrake EHT MultiPress 175-30


          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland

          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-4021170 · Hydr. pressbrake

          EHT - MultiPress 175-30 - - 2002 -

          Technical details
          pressure 175 t︱chamfer lenght 3050 mm︱voltage 3x400 V︱control voltage 24 kW︱ 80 A︱frequency 50 Hz︱ DNC 1200PS PressCad18,5 kW︱quantity of oil 350 l︱height of the machine 3360 mm︱weight of the machine ca. 12700 kg︱
            pressure 175 t
            chamfer lenght 3050 mm
            voltage 3x400 V
            control voltage 24 kW
            80 A
            frequency 50 Hz
            DNC 1200PS PressCad
            18,5 kW
            quantity of oil 350 l
            height of the machine 3360 mm
            weight of the machine ca. 12700 kg


        • Bästlein
        • Augsburger Str. 56
        • 89312 Günzburg
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Hydr. pressbrake EHT VarioPress 225-60


          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland

          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-4020953 · Hydr. pressbrake

          EHT - VarioPress 225-60 - - 2001 - CYBELEC DNC 1200 PS

          Technical details
          pressure 225 t︱chamfer lenght 6050 mm︱Control CYBELEC DNC 1200 PS ︱total power requirement 18,5 kW︱
            pressure 225 t
            chamfer lenght 6050 mm
            Control CYBELEC DNC 1200 PS
            total power requirement 18,5 kW


        • Bästlein
        • Augsburger Str. 56
        • 89312 Günzburg
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Hydr. pressbrake EHT VarioPress 300-30


          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland

          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-4021124 · Hydr. pressbrake

          EHT - VarioPress 300-30 - - 2001 - CYBELEC Visitouch

          Technical details
          pressure 300 t︱chamfer lenght 3050 mm︱quantity of oil 400 l︱dimensions 4550x3000x3700 mm︱weight 19000 kg︱Control CYBELEC Visitouch
            pressure 300 t
            chamfer lenght 3050 mm
            quantity of oil 400 l
            dimensions 4550x3000x3700 mm
            weight 19000 kg
            Control CYBELEC Visitouch


        • Bästlein
        • Augsburger Str. 56
        • 89312 Günzburg
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Hydr. pressbrake EHT EcoPress 175-40


          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland

          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-4021159 · Hydr. pressbrake

          EHT - EcoPress 175-40 - - 2000 - DNC 1200 PS

          Technical details
          pressure 175 t︱chamfer lenght 4050 mm︱Control DNC 1200 PS ︱weight of the machine ca. kg︱
            pressure 175 t
            chamfer lenght 4050 mm
            Control DNC 1200 PS


        • Bästlein
        • Augsburger Str. 56
        • 89312 Günzburg
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Hydr. pressbrake EHT VARIOPRESS 225-45


          • Frech GmbH
          • Werderstr. 82
          • 74889 Sinsheim
          • Deutschland

          • 0049-7261-1011
            0049-7261-63966
          • info@frech-maschinen.de
            www.frech-maschinen.de
          #1073-96920 · Hydr. pressbrake

          EHT - VARIOPRESS 225-45 - - 1999 -

          Technical details
          pressure 225 t︱chamfer lenght 4550 mm︱distance between columns 4050 mm︱between stands ca. 300 mm︱stroke 240 mm︱Control ︱total power requirement 18,50 kW︱weight of the machine ca. 20 t︱dimensions of the machine ca. 5,30 x 2,35 x 3,37 m︱
          • Controlled axes: Y1, Y2, X, R • Control model DNC 800 2D graphics • Pneumatic tool clamping • CNC controlled crowning • Upper tools straight with replacement blade 4000mm segm • Multiple matrix block segm. 4000mm • Pneumatic die displacement • Sliding support arms • Operating manual
            pressure 225 t
            chamfer lenght 4550 mm
            distance between columns 4050 mm
            between stands ca. 300 mm
            stroke 240 mm
            total power requirement 18,50 kW
            weight of the machine ca. 20 t
            dimensions of the machine ca. 5,30 x 2,35 x 3,37 m
            Description :
            • Controlled axes: Y1, Y2, X, R
            • Control model DNC 800 2D graphics
            • Pneumatic tool clamping
            • CNC controlled crowning
            • Upper tools straight with replacement blade 4000mm segm
            • Multiple matrix block segm. 4000mm
            • Pneumatic die displacement
            • Sliding support arms
            • Operating manual


        • Frech GmbH
        • Werderstr. 82
        • 74889 Sinsheim
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Hydr. pressbrake EHT VARIOPRESS 225-60


          • Frech GmbH
          • Werderstr. 82
          • 74889 Sinsheim
          • Deutschland

          • 0049-7261-1011
            0049-7261-63966
          • info@frech-maschinen.de
            www.frech-maschinen.de
          #1073-96896 · Hydr. pressbrake

          EHT - VARIOPRESS 225-60 - - 1998 -

          Technical details
          pressure 225 t︱chamfer lenght 6050 mm︱distance between columns 4550 mm︱column arm 300 mm︱ajustment speed 110 mm/sec︱work speed 9,0 mm/sec︱return speed 130 mm/sec︱work stroke 240 mm︱dayligth 560 mm︱table height 1000 mm︱table width 300 mm︱operating pressure max. 296 bar︱air pressure 4,5 - 6,0 bar︱oil volume 350 ltr.︱voltage 400 Volt︱total power requirement 18,5 kW︱weight 22400 kg︱range L-W-H 7870 x 3790 x 3660 mm︱
          Furnishing: - CYBELEC DNC 806 PS/K CNC control, swiveling at the front right * high resolution graphic screen * Representation as a line, area or volume drawing of the product * Clear, concise menus in the operator's language * Large tools and products library - CNC-controlled back gauge adjustment (X-axis) * Stop range X axis of bending line .. 5.0 - 1.000 mm * Adjustment speed .. max. 250 mm/sec. * 2x manually adjustable stop fingers with pneumatic clamping - CNC-controlled vertical adjustment of the stop fingers (R axis) * Adjustment range of table surface .. 75 - 225 mm * Adjustment speed .. max. 100 mm/sec. - CNC-controlled / pneumatic die displacement (I-axis) - CNC-controlled front bending aids with function (BV1 axis) * Swivel angle max... 45 degrees * Swivel speed .. max. 45 degrees/sec. - WILA CNC-controlled electric table crowning - pneumatic EHT upper tool clamping - 2x freely movable 2 hand/foot controls - rear protective device (protective grille) - side protection device (protective grille) - original operating instructions + circuit diagrams * Special accessories included: - 1x EHT MULTI V reversible die block (V20/40/55/80 mm) - 1x UKB split upper tool set.. Length 6.050 mm - 1x EHT split upper tool set.. Length 1.550 mm
            pressure 225 t
            chamfer lenght 6050 mm
            distance between columns 4550 mm
            column arm 300 mm
            ajustment speed 110 mm/sec
            work speed 9,0 mm/sec
            return speed 130 mm/sec
            work stroke 240 mm
            dayligth 560 mm
            table height 1000 mm
            table width 300 mm
            operating pressure max. 296 bar
            air pressure 4,5 - 6,0 bar
            oil volume 350 ltr.
            voltage 400 Volt
            total power requirement 18,5 kW
            weight 22400 kg
            range L-W-H 7870 x 3790 x 3660 mm
            Description :
            Furnishing:
            - CYBELEC DNC 806 PS/K CNC control, swiveling at the front right
            * high resolution graphic screen
            * Representation as a line, area or volume drawing of the product
            * Clear, concise menus in the operator's language
            * Large tools and products library
            - CNC-controlled back gauge adjustment (X-axis)
            * Stop range X axis of bending line .. 5.0 - 1.000 mm
            * Adjustment speed .. max. 250 mm/sec.
            * 2x manually adjustable stop fingers with pneumatic clamping
            - CNC-controlled vertical adjustment of the stop fingers (R axis)
            * Adjustment range of table surface .. 75 - 225 mm
            * Adjustment speed .. max. 100 mm/sec.
            - CNC-controlled / pneumatic die displacement (I-axis)
            - CNC-controlled front bending aids with function (BV1 axis)
            * Swivel angle max... 45 degrees
            * Swivel speed .. max. 45 degrees/sec.
            - WILA CNC-controlled electric table crowning
            - pneumatic EHT upper tool clamping
            - 2x freely movable 2 hand/foot controls
            - rear protective device (protective grille)
            - side protection device (protective grille)
            - original operating instructions + circuit diagrams

            * Special accessories included:
            - 1x EHT MULTI V reversible die block (V20/40/55/80 mm)
            - 1x UKB split upper tool set.. Length 6.050 mm
            - 1x EHT split upper tool set.. Length 1.550 mm




        • Frech GmbH
        • Werderstr. 82
        • 74889 Sinsheim
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Hydr. pressbrake EHT VarioPress 125-50


          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland

          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-4021147 · Hydr. pressbrake

          EHT - VarioPress 125-50 - - 1998 - Cybelec ModEva

          Technical details
          pressure 125 t︱chamfer lenght 5050 mm︱control Cybelec ModEva ︱Y-rapid travel 100 mm/s︱ 10 mm/s︱ 100 mm/s︱oil volume 250 l︱
            pressure 125 t
            chamfer lenght 5050 mm
            control Cybelec ModEva
            Y-rapid travel 100 mm/s
            10 mm/s
            100 mm/s
            oil volume 250 l


        • Bästlein
        • Augsburger Str. 56
        • 89312 Günzburg
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Hydr. pressbrake EHT EHPS 15-40


          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland

          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-4020954 · Hydr. pressbrake

          EHT - EHPS 15-40 - - 1995/2018 - CYBELEC ModEva Pac

          Technical details
          pressure 150 t︱chamfer lenght 4050 mm︱distance between columns 3550 mm︱Control CYBELEC ModEva Pac ︱throat 350 mm︱distance between table / ram 430 mm︱table width 250 mm︱stroke 250 mm︱total power requirement 18,5 kW︱weight of the machine ca. 16500 kg︱dimensions of the machine ca. 4400x2100x3200 mm︱
            pressure 150 t
            chamfer lenght 4050 mm
            distance between columns 3550 mm
            Control CYBELEC ModEva Pac
            throat 350 mm
            distance between table / ram 430 mm
            table width 250 mm
            stroke 250 mm
            total power requirement 18,5 kW
            weight of the machine ca. 16500 kg
            dimensions of the machine ca. 4400x2100x3200 mm


        • Bästlein
        • Augsburger Str. 56
        • 89312 Günzburg
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Hydr. pressbrake EHT EcoPress 125


          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland

          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-4021134 · Hydr. pressbrake

          EHT - EcoPress 125 - - 1995 -

          Technical details
          pressure 125 t︱chamfer lenght 3550 mm︱distance between columns 3050 mm︱column arm 300 mm︱stroke of ram 240 mm︱quantity of oil 200 l︱total power requirement 11 kW︱weight of the machine ca. 14000 kg︱
            pressure 125 t
            chamfer lenght 3550 mm
            distance between columns 3050 mm
            column arm 300 mm
            stroke of ram 240 mm
            quantity of oil 200 l
            total power requirement 11 kW
            weight of the machine ca. 14000 kg


        • Bästlein
        • Augsburger Str. 56
        • 89312 Günzburg
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Hydr. pressbrake EHT EcoPress 125


          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland

          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-4021098 · Hydr. pressbrake

          EHT - EcoPress 125 - - 1995 - VisiTouch Pac

          Technical details
          pressure 125 t︱chamfer lenght 3550 mm︱distance between columns 3050 mm︱column arm 300 mm︱stroke of ram 240 mm︱quantity of oil 200 l︱rated current 27 A︱control VisiTouch Pac ︱total power requirement 11 kW︱weight of the machine ca. 14000 kg︱
            pressure 125 t
            chamfer lenght 3550 mm
            distance between columns 3050 mm
            column arm 300 mm
            stroke of ram 240 mm
            quantity of oil 200 l
            rated current 27 A
            control VisiTouch Pac
            total power requirement 11 kW
            weight of the machine ca. 14000 kg


        • Bästlein
        • Augsburger Str. 56
        • 89312 Günzburg
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Hydr. pressbrake EHT EHPS 11-25


          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland

          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-4021111 · Hydr. pressbrake

          EHT - EHPS 11-25 - - 1994 -

          Technical details
          pressure 110 t︱chamfer lenght 2550 mm︱quantity of oil 390 l︱
            pressure 110 t
            chamfer lenght 2550 mm
            quantity of oil 390 l


        • Bästlein
        • Augsburger Str. 56
        • 89312 Günzburg
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Hydr. pressbrake EHT EHPS 15-30


          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland

          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-4020933 · Hydr. pressbrake

          EHT - EHPS 15-30 - - 1993/2011 - Cybelec DNC 880S

          Technical details
          pressure 150 t︱chamfer lenght 3550 mm︱distance between columns 3050 mm︱Control Cybelec DNC 880S ︱stroke 700 mm︱throat 350 mm︱dimensions 4400x2200x3940 mm︱weight of the machine ca. 15.000 kg︱
            pressure 150 t
            chamfer lenght 3550 mm
            distance between columns 3050 mm
            Control Cybelec DNC 880S
            stroke 700 mm
            throat 350 mm
            dimensions 4400x2200x3940 mm
            weight of the machine ca. 15.000 kg


        • Bästlein
        • Augsburger Str. 56
        • 89312 Günzburg
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Hydr. pressbrake EHT EHPS 11-25


          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland

          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-4021136 · Hydr. pressbrake

          EHT - EHPS 11-25 - - 1993 -

          Technical details
          pressure 110 t︱chamfer lenght 2550 mm︱dimensions 4400x2000x3000 mm︱weight 9000 kg︱
            pressure 110 t
            chamfer lenght 2550 mm
            dimensions 4400x2000x3000 mm
            weight 9000 kg


        • Bästlein
        • Augsburger Str. 56
        • 89312 Günzburg
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Hydr. pressbrake EHT EHP S 320-7250


          • Markus Hirsch GmbH
          • Hüttenstrasse 1
          • 46284 Dorsten
          • Deutschland

          • +49 2362 95035 12
            +49 2362 95035 10
          • liersch@hirsch-maschinen.de
            www.hirsch-maschinen.de
          #1077-03140 · Hydr. pressbrake

          EHT - EHP S 320-7250 - - 1991 -

          Technical details
          pressure 320 t︱chamfer lenght 7250 mm︱distance between columns 6550 mm︱Control ︱throat 400 mm︱ram - range of adjustment 270 mm︱stroke 270 mm︱table surface area 7250x400 mm︱dayligth 560 mm︱fence 5-1000 ja /nein︱total power requirement kW︱weight of the machine ca. 53 t︱dimensions of the machine ca. m︱
            pressure 320 t
            chamfer lenght 7250 mm
            distance between columns 6550 mm
            throat 400 mm
            ram - range of adjustment 270 mm
            stroke 270 mm
            table surface area 7250x400 mm
            dayligth 560 mm
            fence 5-1000 ja /nein
            weight of the machine ca. 53 t


        • Markus Hirsch GmbH
        • Hüttenstrasse 1
        • 46284 Dorsten
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Hydr. pressbrake EHT EHPS 32-80


          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland

          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-4020955 · Hydr. pressbrake

          EHT - EHPS 32-80 - - 1990/2009 - Cybelec ModEva 12S

          Technical details
          pressure 320 t︱chamfer lenght 8050 mm︱distance between columns 7550 mm︱Control Cybelec ModEva 12S
            pressure 320 t
            chamfer lenght 8050 mm
            distance between columns 7550 mm
            Control Cybelec ModEva 12S


        • Bästlein
        • Augsburger Str. 56
        • 89312 Günzburg
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Hydr. pressbrake EHT EHP S 15-35


          • WeMa Antonius Pigge GmbH
          • Barnstorfer Str. 3
          • 49424 Goldenstedt
          • Deutschland

          • +49 (0)444496700
            +49 (0)4444967010
          • info@wema-pigge.de
            www.wema-pigge.de
          #2031-3096 · Hydr. pressbrake

          EHT - EHP S 15-35 - - 1990 - Cybelec 34 PS-CN

          Technical details
          pressure 1500 kN︱chamfer lenght 3550 mm︱distance between columns 3044 mm︱Control Cybelec 34 PS-CN ︱column arm 350 mm︱max. ram stroke 220 mm︱dimensions of the machine ca. 3200 x 4200 x 2100 m︱sheet support hinten / back ︱number of support arms 2, verschiebbar / adjust. ︱die shift ︱hydraulical tool clamping ︱upper tool quick change system ︱crown
          3 sets of tools included
            pressure 1500 kN
            chamfer lenght 3550 mm
            distance between columns 3044 mm
            Control Cybelec 34 PS-CN
            column arm 350 mm
            max. ram stroke 220 mm
            dimensions of the machine ca. 3200 x 4200 x 2100 m
            sheet support hinten / back
            number of support arms 2, verschiebbar / adjust.
            Description :
            3 sets of tools included


        • WeMa Antonius Pigge GmbH
        • Barnstorfer Str. 3
        • 49424 Goldenstedt
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Hydr. pressbrake EHT EHPS 15-3550+H500


          • A + B Werkzeuge Maschinen Handels GmbH
          • Rottweg 17
          • 48683 Ahaus
          • Deutschland

          • (0049)-2561-9384-71
            (0049)-2561-9384-36
          • info@ab-maschinen.de
            www.ab-maschinen.de
          #1008-9308302 · Hydr. pressbrake

          EHT - EHPS 15-3550+H500 - - 1989 -

          Technical details
          pressure 150 t︱chamfer lenght 4050 mm︱distance between columns 3050 mm︱column arm 350 mm︱dayligth 430 mm︱piston stroke 220 mm︱table width 300 mm︱oil volume 390 ltr.︱pressure 265 bar︱total power requirement 18,5 kW︱weight of the machine ca. 13.000 kg︱range L-W-H 4900 x 2740(1890) x 3310 mm︱
          ** from a maintenance workshop Furnishing: - CYBELEC CNC control, model DNC 30 - Swivel control, right front - controlled axes Y1 + Y2 + X + R - CNC motorized table crowning - hydraulic upper tool clamping - Pneumatic lower tool clamping - 2x front pneumatic bending aids - 2x free-moving 2 hand controls/foot controls - lateral protective device (protective grille) - rear protective device (protective grille) - Operation manual
            pressure 150 t
            chamfer lenght 4050 mm
            distance between columns 3050 mm
            column arm 350 mm
            dayligth 430 mm
            piston stroke 220 mm
            table width 300 mm
            oil volume 390 ltr.
            pressure 265 bar
            total power requirement 18,5 kW
            weight of the machine ca. 13.000 kg
            range L-W-H 4900 x 2740(1890) x 3310 mm
            Description :
            ** from a maintenance workshop

            Furnishing:
            - CYBELEC CNC control, model DNC 30
            - Swivel control, right front
            - controlled axes Y1 + Y2 + X + R
            - CNC motorized table crowning
            - hydraulic upper tool clamping
            - Pneumatic lower tool clamping
            - 2x front pneumatic bending aids
            - 2x free-moving 2 hand controls/foot controls
            - lateral protective device (protective grille)
            - rear protective device (protective grille)
            - Operation manual


        • A + B Werkzeuge Maschinen Handels GmbH
        • Rottweg 17
        • 48683 Ahaus
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Hydr. pressbrake EHT EHPS 15-3550+H500


          • Frech GmbH
          • Werderstr. 82
          • 74889 Sinsheim
          • Deutschland

          • 0049-7261-1011
            0049-7261-63966
          • info@frech-maschinen.de
            www.frech-maschinen.de
          #1073-96820 · Hydr. pressbrake

          EHT - EHPS 15-3550+H500 - - 1989 -

          Technical details
          pressure 150 t︱chamfer lenght 4050 mm︱distance between columns 3050 mm︱column arm 350 mm︱dayligth 430 mm︱piston stroke 220 mm︱table width 300 mm︱oil volume 390 ltr.︱pressure 265 bar︱total power requirement 18,5 kW︱weight of the machine ca. 13.000 kg︱range L-W-H 4900 x 2250 x 3200 mm︱
          ** from a maintenance workshop Furnishing: - CYBELEC CNC control, model DNC 30 - Swivel control, right front - controlled axes Y1 + Y2 + X + R - CNC motorized table crowning - hydraulic upper tool clamping - Pneumatic lower tool clamping - 2x front pneumatic bending aids - 2x free-moving 2 hand controls/foot controls - lateral protective device (protective grille) - rear protective device (protective grille) - Operation manual
            pressure 150 t
            chamfer lenght 4050 mm
            distance between columns 3050 mm
            column arm 350 mm
            dayligth 430 mm
            piston stroke 220 mm
            table width 300 mm
            oil volume 390 ltr.
            pressure 265 bar
            total power requirement 18,5 kW
            weight of the machine ca. 13.000 kg
            range L-W-H 4900 x 2250 x 3200 mm
            Description :
            ** from a maintenance workshop

            Furnishing:
            - CYBELEC CNC control, model DNC 30
            - Swivel control, right front
            - controlled axes Y1 + Y2 + X + R
            - CNC motorized table crowning
            - hydraulic upper tool clamping
            - Pneumatic lower tool clamping
            - 2x front pneumatic bending aids
            - 2x free-moving 2 hand controls/foot controls
            - lateral protective device (protective grille)
            - rear protective device (protective grille)
            - Operation manual


        • Frech GmbH
        • Werderstr. 82
        • 74889 Sinsheim
        • Deutschland

        • Datasheet
          Request / Contact
          •   
          •   
          • 1  
          • 2  
          •   
          •