European network of stockholding machinery dealers

Category:
    Manufacturer:
      Machines:
        Trader:

          A + B Werkzeuge Maschinen Handels GmbH - Stockist for used machines

          Machinelist:


          lathe-conventional-electronic

          used  lathe-conventional-electronic TOS SUIL-40A1/1000


          • A + B Werkzeuge Maschinen Handels GmbH
          • Rottweg 17
          • 48683 Ahaus
          • Deutschland

          • (0049)-2561-9384-71
            (0049)-2561-9384-36
          • info@ab-maschinen.de
            www.ab-maschinen.de
          #1008-9207216 · lathe-conventional-electronic

          TOS - SUIL-40A1/1000 - - 1995 -

          Technical details
          turning length 1000 mm︱turning diameter 400 mm︱swing diameter over bed slide 260 mm︱turning diameter over slide rest 220 mm︱centre height 200 mm︱spindle bore 50,0 mm︱turning speeds 20 - 3.150 U/min︱tailstock quill taper MT 5 MK︱bed width 300 mm︱spindle taper Camlock 5,6 B 6 ︱total power requirement 4,0 kW︱weight of the machine ca. 1.750 kg.︱range L-W-H 2.230 x 1.035 x 1.486 mm︱
          Furnishing: - Brand new MACK 3 jaw chuck - Ø 200 mm * Short taper mount DIN 55027 * including 1x set of turning and drilling jaws * including wrench * including fastening bolts - Multifix steel holder, with inserts - bed stop - tailstock - Chip back wall - Coolant device, with tub - Instructions for use
            turning length 1000 mm
            turning diameter 400 mm
            swing diameter over bed slide 260 mm
            turning diameter over slide rest 220 mm
            centre height 200 mm
            spindle bore 50,0 mm
            turning speeds 20 - 3.150 U/min
            tailstock quill taper MT 5 MK
            bed width 300 mm
            spindle taper Camlock 5,6 B 6
            total power requirement 4,0 kW
            weight of the machine ca. 1.750 kg.
            range L-W-H 2.230 x 1.035 x 1.486 mm
            Description :
            Furnishing:
            - Brand new MACK 3 jaw chuck - Ø 200 mm
            * Short taper mount DIN 55027
            * including 1x set of turning and drilling jaws
            * including wrench
            * including fastening bolts
            - Multifix steel holder, with inserts
            - bed stop
            - tailstock
            - Chip back wall
            - Coolant device, with tub
            - Instructions for use
          Datasheet
          Request / Contact
          used  lathe-conventional-electronic MATRA GUBAT MDG


          • A + B Werkzeuge Maschinen Handels GmbH
          • Rottweg 17
          • 48683 Ahaus
          • Deutschland

          • (0049)-2561-9384-71
            (0049)-2561-9384-36
          • info@ab-maschinen.de
            www.ab-maschinen.de
          #1008-9207175 · lathe-conventional-electronic

          MATRA GUBAT - MDG - - 1987 -

          Technical details
          turning length 750 mm︱turning diameter over bed 1300 mm︱turning diameter over slide rest 850 mm︱throat 1500 mm︱turning speeds 9 - 400 U/min︱tailstock quill taper MT 5 ︱spindle bore ~ 140 mm︱weight of the machine ca. ca. 7.000 kg︱
          Furnishing: - heavy lead / pull spindle conv. Lathe - HEIDENHAIN digital display - Face plate D = 1,000 mm - Multifix steel holder with inserts - autom. Feed bed / cross slide - manual feed upper support by handwheel - tailstock - various other accessories
            turning length 750 mm
            turning diameter over bed 1300 mm
            turning diameter over slide rest 850 mm
            throat 1500 mm
            turning speeds 9 - 400 U/min
            tailstock quill taper MT 5
            spindle bore ~ 140 mm
            weight of the machine ca. ca. 7.000 kg
            Description :
            Furnishing:
            - heavy lead / pull spindle conv. Lathe
            - HEIDENHAIN digital display
            - Face plate D = 1,000 mm
            - Multifix steel holder with inserts
            - autom. Feed bed / cross slide
            - manual feed upper support by handwheel
            - tailstock
            - various other accessories
          Datasheet
          Request / Contact
          used  lathe-conventional-electronic VDF BOEHRINGER DUE 560/2500


          • A + B Werkzeuge Maschinen Handels GmbH
          • Rottweg 17
          • 48683 Ahaus
          • Deutschland

          • (0049)-2561-9384-71
            (0049)-2561-9384-36
          • info@ab-maschinen.de
            www.ab-maschinen.de
          #1008-9207203 · lathe-conventional-electronic

          VDF BOEHRINGER - DUE 560/2500 - - 1983 -

          Technical details
          turning length 2500 mm︱turning diameter 570 mm︱turning diameter over slide rest 365 mm︱turning dia. in gap 600 mm︱quill: 6 MK︱turning speeds 11,2 - 2.240 U/min︱spindle bore 62,0 mm︱bed width 450 mm︱weight of tools max. 800 kg︱total power requirement 13,5 kW︱weight of the machine ca. 4700 kg.︱
          Furnishing: - Precision universal lathe - 3 jaw chuck Ø 400 mm - EASSON digital display - Quadruple steel holder - fixed bezel - Rice stick with keyless chuck - coolant device further techn. Data : - Working path facing slide ... 345 mm - Upper slide travel ... 125 mm - Travel to work rice stick quill ... 190 mm
            turning length 2500 mm
            turning diameter 570 mm
            turning diameter over slide rest 365 mm
            turning dia. in gap 600 mm
            quill: 6 MK
            turning speeds 11,2 - 2.240 U/min
            spindle bore 62,0 mm
            bed width 450 mm
            weight of tools max. 800 kg
            total power requirement 13,5 kW
            weight of the machine ca. 4700 kg.
            Description :
            Furnishing:
            - Precision universal lathe
            - 3 jaw chuck Ø 400 mm
            - EASSON digital display
            - Quadruple steel holder
            - fixed bezel
            - Rice stick with keyless chuck
            - coolant device

            further techn. Data :
            - Working path facing slide ... 345 mm
            - Upper slide travel ... 125 mm
            - Travel to work rice stick quill ... 190 mm
          Datasheet
          Request / Contact
          used  lathe-conventional-electronic BERNARDO MASTER 380-1000 Digital


          • A + B Werkzeuge Maschinen Handels GmbH
          • Rottweg 17
          • 48683 Ahaus
          • Deutschland

          • (0049)-2561-9384-71
            (0049)-2561-9384-36
          • info@ab-maschinen.de
            www.ab-maschinen.de
          #1008-8203117 · lathe-conventional-electronic

          BERNARDO - MASTER 380-1000 Digital - - -

          Technical details
          turning length 1000 mm︱turning diameter 380 mm︱turning dia. in gap 490 mm︱spindle bore 51,0 mm︱turning speeds 70 - 2000 U/min︱bed width 185 mm︱spindle taper 55029 D 1-5︱taper in tailstock 4 MK︱quill travel 120 mm︱total power requirement 1,5 / 2,2 kW︱weight of the machine ca. 575 kg.︱range L-W-H 1920 x 800 x 1660 mm︱
            turning length 1000 mm
            turning diameter 380 mm
            turning dia. in gap 490 mm
            spindle bore 51,0 mm
            turning speeds 70 - 2000 U/min
            bed width 185 mm
            spindle taper 55029 D 1-5
            taper in tailstock 4 MK
            quill travel 120 mm
            total power requirement 1,5 / 2,2 kW
            weight of the machine ca. 575 kg.
            range L-W-H 1920 x 800 x 1660 mm
          Datasheet
          Request / Contact
          used  lathe-conventional-electronic BERNARDO SMART 410-1000 Digital


          • A + B Werkzeuge Maschinen Handels GmbH
          • Rottweg 17
          • 48683 Ahaus
          • Deutschland

          • (0049)-2561-9384-71
            (0049)-2561-9384-36
          • info@ab-maschinen.de
            www.ab-maschinen.de
          #1008-8203008 · lathe-conventional-electronic

          BERNARDO - SMART 410-1000 Digital - - -

          Technical details
          turning length 1000 mm︱turning diameter 410 mm︱swing diameter over bed slide 255 mm︱turning dia. in gap 580 mm︱spindle bore 52,0 mm︱turning speeds 45 - 1800 U/min︱bed width 250 mm︱spindle taper 55029 D 1-6︱taper in tailstock 4 MK︱quill travel 120 mm︱total power requirement 3,3 kW︱weight of the machine ca. 1550 kg.︱range L-W-H 2,03 x 1,0 x 1,45 m︱
            turning length 1000 mm
            turning diameter 410 mm
            swing diameter over bed slide 255 mm
            turning dia. in gap 580 mm
            spindle bore 52,0 mm
            turning speeds 45 - 1800 U/min
            bed width 250 mm
            spindle taper 55029 D 1-6
            taper in tailstock 4 MK
            quill travel 120 mm
            total power requirement 3,3 kW
            weight of the machine ca. 1550 kg.
            range L-W-H 2,03 x 1,0 x 1,45 m
          Datasheet
          Request / Contact
          used  lathe-conventional-electronic BERNARDO TITAN 560-1500 Digital


          • A + B Werkzeuge Maschinen Handels GmbH
          • Rottweg 17
          • 48683 Ahaus
          • Deutschland

          • (0049)-2561-9384-71
            (0049)-2561-9384-36
          • info@ab-maschinen.de
            www.ab-maschinen.de
          #1008-8203010 · lathe-conventional-electronic

          BERNARDO - TITAN 560-1500 Digital - - -

          Technical details
          turning length 1500 mm︱turning diameter 560 mm︱turning diameter over slide 350 mm︱turning speeds 25 - 1600 U/min︱swing diameter over bed slide 350 mm︱turning dia. in gap 785 mm︱quill travel 180 mm︱spindle bore 105,0 mm︱engine output 7,5 kW︱spindle taper DIN 55029 D 1-8︱quill: 5 MK︱weight of the machine ca. 2.370 kg.︱range L-W-H 2.840 x 1.150 x 1.460 mm︱
          Scope of delivery : - 3-axis digital display ES-12 V with LCD display - 3-jaw chuck PS3-315 mm / D8 - clamping disc 450 mm - Fixed bezel - passage diam. max. 180 mm - Live steady rest - passage diam. max. 120 mm - 2 center points - First filling with Shell Tellus 46 - Motor with magnetic brake according to CE standard - Foot pedal with brake function according to CE - coolant device - Quick change tool holder with 4 inserts - Protective device for quick-change tool holders - slip clutch - LED machine light - change gears - reducing sleeve - Thread clock - Chip back wall - operating tool
            turning length 1500 mm
            turning diameter 560 mm
            turning diameter over slide 350 mm
            turning speeds 25 - 1600 U/min
            swing diameter over bed slide 350 mm
            turning dia. in gap 785 mm
            quill travel 180 mm
            spindle bore 105,0 mm
            engine output 7,5 kW
            spindle taper DIN 55029 D 1-8
            quill: 5 MK
            weight of the machine ca. 2.370 kg.
            range L-W-H 2.840 x 1.150 x 1.460 mm
            Description :
            Scope of delivery :
            - 3-axis digital display ES-12 V with LCD display
            - 3-jaw chuck PS3-315 mm / D8
            - clamping disc 450 mm
            - Fixed bezel - passage diam. max. 180 mm
            - Live steady rest - passage diam. max. 120 mm
            - 2 center points
            - First filling with Shell Tellus 46
            - Motor with magnetic brake according to CE standard
            - Foot pedal with brake function according to CE
            - coolant device
            - Quick change tool holder with 4 inserts
            - Protective device for quick-change tool holders
            - slip clutch
            - LED machine light
            - change gears
            - reducing sleeve
            - Thread clock
            - Chip back wall
            - operating tool
          Datasheet
          Request / Contact
          used  lathe-conventional-electronic BERNARDO SMART 410-1000 Vario Digital


          • A + B Werkzeuge Maschinen Handels GmbH
          • Rottweg 17
          • 48683 Ahaus
          • Deutschland

          • (0049)-2561-9384-71
            (0049)-2561-9384-36
          • info@ab-maschinen.de
            www.ab-maschinen.de
          #1008-8203099 · lathe-conventional-electronic

          BERNARDO - SMART 410-1000 Vario Digital - - -

          Technical details
          turning length 1000 mm︱turning diameter 410 mm︱swing diameter over bed slide 255 mm︱turning dia. in gap 580 mm︱spindle bore 52,0 mm︱turning speeds 30 - 3000 U/min︱bed width 250 mm︱spindle taper 55029 D 1-6︱taper in tailstock 4 MK︱quill travel 120 mm︱total power requirement 5,5 kW︱weight of the machine ca. 1550 kg.︱range L-W-H 2,03 x 1,0 x 1,45 m︱
          scope of delivery: - 3-axis digital display ES-12 V with LCD display - 3-jaw steel chuck PO3-200 mm / D6 - clamping disc 350 mm - Fixed bezel - passage diam. max. 135 mm - Live steady rest - passage diam. max. 65 mm - Foot pedal with brake function according to CE - Quadruple steel holder - Protective device with quadruple steel holder - Micrometer longitudinal stop - Revolver stop with fine adjustment - Frequency converter - First filling with Shell Tellus 46 - coolant device - slip clutch - Thread clock - LED machine light - change gears - reducing sleeve - 2 center points - Chip back wall - operating tool
            turning length 1000 mm
            turning diameter 410 mm
            swing diameter over bed slide 255 mm
            turning dia. in gap 580 mm
            spindle bore 52,0 mm
            turning speeds 30 - 3000 U/min
            bed width 250 mm
            spindle taper 55029 D 1-6
            taper in tailstock 4 MK
            quill travel 120 mm
            total power requirement 5,5 kW
            weight of the machine ca. 1550 kg.
            range L-W-H 2,03 x 1,0 x 1,45 m
            Description :
            scope of delivery:
            - 3-axis digital display ES-12 V with LCD display
            - 3-jaw steel chuck PO3-200 mm / D6
            - clamping disc 350 mm
            - Fixed bezel - passage diam. max. 135 mm
            - Live steady rest - passage diam. max. 65 mm
            - Foot pedal with brake function according to CE
            - Quadruple steel holder
            - Protective device with quadruple steel holder
            - Micrometer longitudinal stop
            - Revolver stop with fine adjustment
            - Frequency converter
            - First filling with Shell Tellus 46
            - coolant device
            - slip clutch
            - Thread clock
            - LED machine light
            - change gears
            - reducing sleeve
            - 2 center points
            - Chip back wall
            - operating tool
          Datasheet
          Request / Contact
          used  lathe-conventional-electronic BERNARDO MASTER 180-1000 Digital


          • A + B Werkzeuge Maschinen Handels GmbH
          • Rottweg 17
          • 48683 Ahaus
          • Deutschland

          • (0049)-2561-9384-71
            (0049)-2561-9384-36
          • info@ab-maschinen.de
            www.ab-maschinen.de
          #1008-8203120 · lathe-conventional-electronic

          BERNARDO - MASTER 180-1000 Digital - - -

          Technical details
          turning length 1000 mm︱turning diameter 360 mm︱turning dia. in gap 480 mm︱spindle bore 51,0 mm︱turning speeds 70 - 2000 U/min︱bed width 185 mm︱spindle taper 55029 D 1-5︱taper in tailstock 4 MK︱quill travel 110 mm︱total power requirement 1,5 kW︱weight of the machine ca. 540 kg.︱range L-W-H 1920 x 750 x 1600 mm︱
            turning length 1000 mm
            turning diameter 360 mm
            turning dia. in gap 480 mm
            spindle bore 51,0 mm
            turning speeds 70 - 2000 U/min
            bed width 185 mm
            spindle taper 55029 D 1-5
            taper in tailstock 4 MK
            quill travel 110 mm
            total power requirement 1,5 kW
            weight of the machine ca. 540 kg.
            range L-W-H 1920 x 750 x 1600 mm
          Datasheet
          Request / Contact
          used  lathe-conventional-electronic BERNARDO TITAN 660-3000 Digital


          • A + B Werkzeuge Maschinen Handels GmbH
          • Rottweg 17
          • 48683 Ahaus
          • Deutschland

          • (0049)-2561-9384-71
            (0049)-2561-9384-36
          • info@ab-maschinen.de
            www.ab-maschinen.de
          #1008-8203100 · lathe-conventional-electronic

          BERNARDO - TITAN 660-3000 Digital - - -

          Technical details
          turning length 3000 mm︱turning diameter 660 mm︱turning dia. in gap 900 mm︱turning diameter over slide 460 mm︱turning speeds 25 - 1600 U/min︱quill: 5 MK︱quill travel 235 mm︱spindle bore 105,0 mm︱engine output 7,5 kW︱spindle taper DIN 55029 D 1-8︱weight of the machine ca. 3.300 kg.︱dimensions 4.630 x 1.200 x 1.529 mm︱
          characteristics - Versatile application possibilities in general mechanical engineering, Production, one-off production, ... - Central, handy switching for feeds and threads with lead screw and pull spindle - Prism bed made of gray cast iron, inductively hardened and precision ground - Modern main spindle bearings with tapered roller bearings in precision design - Hardened and ground gears and shafts, also in the feed gear - Standard with rapid traverse lengthways and flat to reduce non-productivetimes - Large spindle bore (105 mm) for workpieces with a large diameter - Soft start through the mechanical multi-plate clutch - Electromechanical foot brake to reduce idle times - Best machining performance even when facing - To stiffen the bed guide and to minimize it The bed was provided with strong ribs to protect it from vibrations scope of delivery - 3-axis digital display ES-12 V with LCD display - slip clutch - Rapid traverse lengthways and flat - LED machine light - 3-jaw steel chuck PO3-315 mm / D8 - clamping disc 450 mm - Fixed bezel - passage diam. max. 180 mm - Live steady rest - passage diam. max. 120 mm - 2 center points - Motor with magnetic brake according to CE standard - Foot pedal with brake function according to CE - First filling with Shell Tellus 46 - coolant device - Quick change tool holder with 4 inserts - Protective device for quick-change tool holders - change gears - reducing sleeve - Chip back wall - Cable routing via energy chain - operating tool
            turning length 3000 mm
            turning diameter 660 mm
            turning dia. in gap 900 mm
            turning diameter over slide 460 mm
            turning speeds 25 - 1600 U/min
            quill: 5 MK
            quill travel 235 mm
            spindle bore 105,0 mm
            engine output 7,5 kW
            spindle taper DIN 55029 D 1-8
            weight of the machine ca. 3.300 kg.
            dimensions 4.630 x 1.200 x 1.529 mm
            Description :
            characteristics
            - Versatile application possibilities in general mechanical engineering,
            Production, one-off production, ...
            - Central, handy switching for feeds and threads
            with lead screw and pull spindle
            - Prism bed made of gray cast iron, inductively hardened and precision ground
            - Modern main spindle bearings with tapered roller bearings in precision design
            - Hardened and ground gears and shafts, also in the feed gear
            - Standard with rapid traverse lengthways and flat to reduce
            non-productivetimes
            - Large spindle bore (105 mm) for workpieces with a large diameter
            - Soft start through the mechanical multi-plate clutch
            - Electromechanical foot brake to reduce idle times
            - Best machining performance even when facing
            - To stiffen the bed guide and to minimize it
            The bed was provided with strong ribs to protect it from vibrations

            scope of delivery
            - 3-axis digital display ES-12 V with LCD display
            - slip clutch
            - Rapid traverse lengthways and flat
            - LED machine light
            - 3-jaw steel chuck PO3-315 mm / D8
            - clamping disc 450 mm
            - Fixed bezel - passage diam. max. 180 mm
            - Live steady rest - passage diam. max. 120 mm
            - 2 center points
            - Motor with magnetic brake according to CE standard
            - Foot pedal with brake function according to CE
            - First filling with Shell Tellus 46
            - coolant device
            - Quick change tool holder with 4 inserts
            - Protective device for quick-change tool holders
            - change gears
            - reducing sleeve
            - Chip back wall
            - Cable routing via energy chain
            - operating tool
          Datasheet
          Request / Contact
          used  lathe-conventional-electronic BERNARDO TITAN 560-2000 Digital


          • A + B Werkzeuge Maschinen Handels GmbH
          • Rottweg 17
          • 48683 Ahaus
          • Deutschland

          • (0049)-2561-9384-71
            (0049)-2561-9384-36
          • info@ab-maschinen.de
            www.ab-maschinen.de
          #1008-8203115 · lathe-conventional-electronic

          BERNARDO - TITAN 560-2000 Digital - - -

          Technical details
          turning length 2000 mm︱turning diameter 560 mm︱turning diameter over slide 350 mm︱turning speeds 25 - 1500 U/min︱swing diameter over bed slide 350 mm︱turning dia. in gap 785 mm︱quill travel 180 mm︱quill: 5 MK︱spindle bore 105 mm︱engine output 7,5 kW︱spindle taper DIN 55029 D 1-8︱weight of the machine ca. 2720 kg.︱
          Furnishing : - 3-axis digital display ES-12 V with LCD display - 3-jaw chuck PS3-315 mm / D8 - clamping disc 450 mm - Fixed bezel - passage diam. max. 180 mm - Live steady rest - passage diam. max. 120 mm - 2 center points - First filling with Shell Tellus 46 - Motor with magnetic brake according to CE standard - Foot pedal with brake function according to CE - coolant device - Quick change tool holder with 4 inserts - Protective device for quick-change tool holders - slip clutch - LED machine light - change gears - reducing sleeve - Thread clock - Chip back wall - operating tool
            turning length 2000 mm
            turning diameter 560 mm
            turning diameter over slide 350 mm
            turning speeds 25 - 1500 U/min
            swing diameter over bed slide 350 mm
            turning dia. in gap 785 mm
            quill travel 180 mm
            quill: 5 MK
            spindle bore 105 mm
            engine output 7,5 kW
            spindle taper DIN 55029 D 1-8
            weight of the machine ca. 2720 kg.
            Description :
            Furnishing :
            - 3-axis digital display ES-12 V with LCD display
            - 3-jaw chuck PS3-315 mm / D8
            - clamping disc 450 mm
            - Fixed bezel - passage diam. max. 180 mm
            - Live steady rest - passage diam. max. 120 mm
            - 2 center points
            - First filling with Shell Tellus 46
            - Motor with magnetic brake according to CE standard
            - Foot pedal with brake function according to CE
            - coolant device
            - Quick change tool holder with 4 inserts
            - Protective device for quick-change tool holders
            - slip clutch
            - LED machine light
            - change gears
            - reducing sleeve
            - Thread clock
            - Chip back wall
            - operating tool
          Datasheet
          Request / Contact
          used  lathe-conventional-electronic BERNARDO MASTER 400-1000 Digital


          • A + B Werkzeuge Maschinen Handels GmbH
          • Rottweg 17
          • 48683 Ahaus
          • Deutschland

          • (0049)-2561-9384-71
            (0049)-2561-9384-36
          • info@ab-maschinen.de
            www.ab-maschinen.de
          #1008-8203119 · lathe-conventional-electronic

          BERNARDO - MASTER 400-1000 Digital - - -

          Technical details
          turning length 1000 mm︱turning diameter 400 mm︱turning dia. in gap 560 mm︱spindle bore 52,0 mm︱turning speeds 45 - 2.000 U/min︱bed width 210 mm︱spindle taper 55029 D 1-5︱taper in tailstock 4 MK︱quill travel 100 mm︱total power requirement 2,0 / 2,4 kW︱weight of the machine ca. 810 kg.︱range L-W-H 1.890x800x1.600 mm︱
            turning length 1000 mm
            turning diameter 400 mm
            turning dia. in gap 560 mm
            spindle bore 52,0 mm
            turning speeds 45 - 2.000 U/min
            bed width 210 mm
            spindle taper 55029 D 1-5
            taper in tailstock 4 MK
            quill travel 100 mm
            total power requirement 2,0 / 2,4 kW
            weight of the machine ca. 810 kg.
            range L-W-H 1.890x800x1.600 mm
          Datasheet
          Request / Contact
          used  lathe-conventional-electronic BERNARDO Standard 165 V-D


          • A + B Werkzeuge Maschinen Handels GmbH
          • Rottweg 17
          • 48683 Ahaus
          • Deutschland

          • (0049)-2561-9384-71
            (0049)-2561-9384-36
          • info@ab-maschinen.de
            www.ab-maschinen.de
          #1008-8203140 · lathe-conventional-electronic

          BERNARDO - Standard 165 V-D - - -

          Technical details
          turning length 1000 mm︱turning diameter 350 mm︱turning dia. in gap 450 mm︱spindle bore 40,0 mm︱turning speeds 70 - 2000 U/min︱bed width 180 mm︱spindle taper 55029 D 1-4︱taper in tailstock 3 MK︱quill travel 110 mm︱total power requirement 1,5 kW︱weight of the machine ca. 529 kg.︱range L-W-H 1730x700x1340 mm︱
          Scope of delivery: - 3-axis digital display i200 with LCD display - 3-jaw chuck DK11-160 mm / D4 - Face plate 200 mm / D4, according to DIN 55029 - Fixed bezel - passage diam. max. 60 mm - Live steady rest - passage diam. max. 60 mm - clamping disc 250 mm - Quadruple steel holder - Shaft fixing device - Protective device at steel holder - slip clutch - Longitudinal micrometer stop - coolant device - Pull-out chip tray - Frequency converter - Foot pedal with brake function according to CE - bulkhead - Thread clock - LED machine light - Digital speed display - reducing sleeve - change gears - 2 center points - underframe - operating tool
            turning length 1000 mm
            turning diameter 350 mm
            turning dia. in gap 450 mm
            spindle bore 40,0 mm
            turning speeds 70 - 2000 U/min
            bed width 180 mm
            spindle taper 55029 D 1-4
            taper in tailstock 3 MK
            quill travel 110 mm
            total power requirement 1,5 kW
            weight of the machine ca. 529 kg.
            range L-W-H 1730x700x1340 mm
            Description :
            Scope of delivery:
            - 3-axis digital display i200 with LCD display
            - 3-jaw chuck DK11-160 mm / D4
            - Face plate 200 mm / D4, according to DIN 55029
            - Fixed bezel - passage diam. max. 60 mm
            - Live steady rest - passage diam. max. 60 mm
            - clamping disc 250 mm
            - Quadruple steel holder
            - Shaft fixing device
            - Protective device at steel holder
            - slip clutch
            - Longitudinal micrometer stop
            - coolant device
            - Pull-out chip tray
            - Frequency converter
            - Foot pedal with brake function according to CE
            - bulkhead
            - Thread clock
            - LED machine light
            - Digital speed display
            - reducing sleeve
            - change gears
            - 2 center points
            - underframe
            - operating tool
          Datasheet
          Request / Contact
          used  lathe-conventional-electronic VDF - BOEHRINGER V 5 / 2000


          • A + B Werkzeuge Maschinen Handels GmbH
          • Rottweg 17
          • 48683 Ahaus
          • Deutschland

          • (0049)-2561-9384-71
            (0049)-2561-9384-36
          • info@ab-maschinen.de
            www.ab-maschinen.de
          #1008-9207220 · lathe-conventional-electronic

          VDF - BOEHRINGER - V 5 / 2000 - - -

          Technical details
          turning length 2000 mm︱turning diameter 680 mm︱swing diameter over bed slide 480 mm︱turning diameter over slide rest 335 mm︱centre height 350 mm︱spindle bore 80,0 mm︱turning speeds 14 - 710 U/min︱tailstock quill taper MT 5 MK︱bed width 500 mm︱total power requirement 12,0 kW︱weight of the machine ca. 4.500 kg.︱range L-W-H 3350 x 1450 x 1650 mm︱
          Furnishing: - FORKARDT 3 jaw chuck Ø 315 mm * with 5x set of replacement jaws - "MINI-WIZARD" 2-axis digital display - driven upper support - Multifix steel holder with 5x inserts - mechanical bed stop - Tailstock, with center point - Coolant device, with tub
            turning length 2000 mm
            turning diameter 680 mm
            swing diameter over bed slide 480 mm
            turning diameter over slide rest 335 mm
            centre height 350 mm
            spindle bore 80,0 mm
            turning speeds 14 - 710 U/min
            tailstock quill taper MT 5 MK
            bed width 500 mm
            total power requirement 12,0 kW
            weight of the machine ca. 4.500 kg.
            range L-W-H 3350 x 1450 x 1650 mm
            Description :
            Furnishing:
            - FORKARDT 3 jaw chuck Ø 315 mm
            * with 5x set of replacement jaws
            - "MINI-WIZARD" 2-axis digital display
            - driven upper support
            - Multifix steel holder with 5x inserts
            - mechanical bed stop
            - Tailstock, with center point
            - Coolant device, with tub
          Datasheet
          Request / Contact
          used  lathe-conventional-electronic BERNARDO MASTER PRO 360


          • A + B Werkzeuge Maschinen Handels GmbH
          • Rottweg 17
          • 48683 Ahaus
          • Deutschland

          • (0049)-2561-9384-71
            (0049)-2561-9384-36
          • info@ab-maschinen.de
            www.ab-maschinen.de
          #1008-8203096 · lathe-conventional-electronic

          BERNARDO - MASTER PRO 360 - - -

          Technical details
          turning length 1000 mm︱turning diameter 360 mm︱swing diameter over bed slide 220 mm︱turning dia. in gap 502 mm︱spindle bore 52,0 mm︱turning speeds 70 - 2.000 U/min︱bed width 185 mm︱spindle taper 55029 D 1-5︱taper in tailstock 3 MK︱quill travel 100 mm︱total power requirement 1,5 / 2,2 kW︱weight of the machine ca. 575 kg.︱range L-W-H 1825 x 750 x 1600 mm︱
          scope of delivery - 3-axis digital display i200 with LCD display - 3-jaw chuck DK11-200 mm / D5 - Face plate 200 mm / D5, according to DIN 55029 - Fixed bezel - passage diam. max. 70 mm - Live steady rest - passage diam. max. 60 mm - coolant device - First filling with Shell Tellus 46 - Pull-out chip tray - clamping disc 280 mm - Quadruple steel holder - Protective device with quadruple steel holder - slip clutch - Longitudinal micrometer stop - Thread clock - LED machine light - reducing sleeve - change gears - 2 center points - Foot pedal with brake function according to CE - Motor with magnetic brake according to CE standard - Base with drawers - operating tool
            turning length 1000 mm
            turning diameter 360 mm
            swing diameter over bed slide 220 mm
            turning dia. in gap 502 mm
            spindle bore 52,0 mm
            turning speeds 70 - 2.000 U/min
            bed width 185 mm
            spindle taper 55029 D 1-5
            taper in tailstock 3 MK
            quill travel 100 mm
            total power requirement 1,5 / 2,2 kW
            weight of the machine ca. 575 kg.
            range L-W-H 1825 x 750 x 1600 mm
            Description :
            scope of delivery
            - 3-axis digital display i200 with LCD display
            - 3-jaw chuck DK11-200 mm / D5
            - Face plate 200 mm / D5, according to DIN 55029
            - Fixed bezel - passage diam. max. 70 mm
            - Live steady rest - passage diam. max. 60 mm
            - coolant device
            - First filling with Shell Tellus 46
            - Pull-out chip tray
            - clamping disc 280 mm
            - Quadruple steel holder
            - Protective device with quadruple steel holder
            - slip clutch
            - Longitudinal micrometer stop
            - Thread clock
            - LED machine light
            - reducing sleeve
            - change gears
            - 2 center points
            - Foot pedal with brake function according to CE
            - Motor with magnetic brake according to CE standard
            - Base with drawers
            - operating tool
          Datasheet
          Request / Contact
          used  lathe-conventional-electronic BERNARDO SOLID 460-1500 Vario Digital


          • A + B Werkzeuge Maschinen Handels GmbH
          • Rottweg 17
          • 48683 Ahaus
          • Deutschland

          • (0049)-2561-9384-71
            (0049)-2561-9384-36
          • info@ab-maschinen.de
            www.ab-maschinen.de
          #1008-8203098 · lathe-conventional-electronic

          BERNARDO - SOLID 460-1500 Vario Digital - - -

          Technical details
          turning length 1500 mm︱turning diameter 460 mm︱swing diameter over bed slide 274 mm︱turning dia. in gap 690 mm︱spindle bore 58,0 mm︱turning speeds 30 - 2.000 U/min︱bed width 300 mm︱spindle taper 55029 D 1-6︱taper in tailstock 4 MK︱quill travel 130 mm︱total power requirement 5,5 kW︱weight of the machine ca. 2020 kg.︱range L-W-H 2750x1080x1370 mm︱
          Description: The Solid 460 Vario universal lathe was specially designed to be economical Manufacture of individual workpieces and small series with high precision designed. This model is suitable due to its great ease of use especially for mechanical engineering, plant construction, production andcustom-made products scope of delivery - 3-axis digital display ES-12 V with LCD display - 3-jaw chuck PS3-250 mm / D8 - Fixed bezel - passage diam. max. 150 mm - Live steady rest - passage diam. max. 110 mm - First filling with Shell Tellus 46 - clamping disc 350 mm - Quick change tool holder with 4 inserts - Protective device for quick-change tool holders - Foot pedal with brake function according to CE - coolant device - Frequency converter - slip clutch - change gears - reducing sleeve - 2 center points - Thread clock - LED machine light - Chip back wall - operating tool
            turning length 1500 mm
            turning diameter 460 mm
            swing diameter over bed slide 274 mm
            turning dia. in gap 690 mm
            spindle bore 58,0 mm
            turning speeds 30 - 2.000 U/min
            bed width 300 mm
            spindle taper 55029 D 1-6
            taper in tailstock 4 MK
            quill travel 130 mm
            total power requirement 5,5 kW
            weight of the machine ca. 2020 kg.
            range L-W-H 2750x1080x1370 mm
            Description :
            Description:
            The Solid 460 Vario universal lathe was specially designed to be economical
            Manufacture of individual workpieces and small series with high precision
            designed. This model is suitable due to its great ease of use especially for
            mechanical engineering, plant construction, production andcustom-made products

            scope of delivery
            - 3-axis digital display ES-12 V with LCD display
            - 3-jaw chuck PS3-250 mm / D8
            - Fixed bezel - passage diam. max. 150 mm
            - Live steady rest - passage diam. max. 110 mm
            - First filling with Shell Tellus 46
            - clamping disc 350 mm
            - Quick change tool holder with 4 inserts
            - Protective device for quick-change tool holders
            - Foot pedal with brake function according to CE
            - coolant device
            - Frequency converter
            - slip clutch
            - change gears
            - reducing sleeve
            - 2 center points
            - Thread clock
            - LED machine light
            - Chip back wall
            - operating tool
          Datasheet
          Request / Contact

          Bench Drilling Machine

          used  Bench Drilling Machine ALZMETALL AX 2 T/S-N


          • A + B Werkzeuge Maschinen Handels GmbH
          • Rottweg 17
          • 48683 Ahaus
          • Deutschland

          • (0049)-2561-9384-71
            (0049)-2561-9384-36
          • info@ab-maschinen.de
            www.ab-maschinen.de
          #1008-9093613 · Bench Drilling Machine

          ALZMETALL - AX 2 T/S-N - - 1994 -

          Technical details
          bore capacity in steel (diameter) 23,0 mm︱throat 250 mm︱bore stroke 100 mm︱spindle taper 2 MK︱table: 370 x 300 mm︱turning speeds 225 - 4300 U/min︱column diameter 90 mm︱distance spindle /table 60/460 mm︱T-slots 2x14x160 mm︱total power requirement 0,6/0,95 kW︱weight 155 kg︱range L-W-H 650 x 750 x 1095 mm︱
          ** from a training workshop - good condition (!!) ** current new price ~ 4.600 euros Furnishing: - Pole changing motor - stepless speed adjustment - manual spindle feed - Height-adjustable work table, by hand crank - main switch - Mushroom pushbuttons for emergencies
            bore capacity in steel (diameter. 23,0 mm
            throat 250 mm
            bore stroke 100 mm
            spindle taper 2 MK
            table: 370 x 300 mm
            turning speeds 225 - 4300 U/min
            column diameter 90 mm
            distance spindle /table 60/460 mm
            T-slots 2x14x160 mm
            total power requirement 0,6/0,95 kW
            weight 155 kg
            range L-W-H 650 x 750 x 1095 mm
            Description :
            ** from a training workshop - good condition (!!)
            ** current new price ~ 4.600 euros

            Furnishing:
            - Pole changing motor
            - stepless speed adjustment
            - manual spindle feed
            - Height-adjustable work table, by hand crank
            - main switch
            - Mushroom pushbuttons for emergencies
          Datasheet
          Request / Contact
          used  Bench Drilling Machine BERNARDO BM 25 T - 400


          • A + B Werkzeuge Maschinen Handels GmbH
          • Rottweg 17
          • 48683 Ahaus
          • Deutschland

          • (0049)-2561-9384-71
            (0049)-2561-9384-36
          • info@ab-maschinen.de
            www.ab-maschinen.de
          #1008-8092704 · Bench Drilling Machine

          BERNARDO - BM 25 T - 400 - - -

          Technical details
          bore capacity in steel (diameter) 25,0 mm︱throat 180 mm︱bore stroke 80 mm︱morse taper 2 MK︱total power requirement 1,1 kW︱turning speeds 180 - 2270 U/min︱voltage 400 V︱weight - pallet system 57 kg︱
          scope of delivery - Keyless chuck 1 - 16 mm / B 18 - Drill chuck arbor MK 2 / B 18 - Digital quill stroke display - machine light - Right-left rotation - protective cover - Height-adjustable protective cover - T-nuts - operating tool
            bore capacity in steel (diameter. 25,0 mm
            throat 180 mm
            bore stroke 80 mm
            morse taper 2 MK
            total power requirement 1,1 kW
            turning speeds 180 - 2270 U/min
            voltage 400 V
            weight - pallet system 57 kg
            Description :
            scope of delivery
            - Keyless chuck 1 - 16 mm / B 18
            - Drill chuck arbor MK 2 / B 18
            - Digital quill stroke display
            - machine light
            - Right-left rotation
            - protective cover
            - Height-adjustable protective cover
            - T-nuts
            - operating tool
          Datasheet
          Request / Contact
          used  Bench Drilling Machine ALZMETALL ALZSTAR 18-T/S


          • A + B Werkzeuge Maschinen Handels GmbH
          • Rottweg 17
          • 48683 Ahaus
          • Deutschland

          • (0049)-2561-9384-71
            (0049)-2561-9384-36
          • info@ab-maschinen.de
            www.ab-maschinen.de
          #1008-80910 · Bench Drilling Machine

          ALZMETALL - ALZSTAR 18-T/S - - -

          Technical details
          bore capacity in steel (diameter) 18,0 mm︱throat 190 mm︱bore stroke 80 mm︱morse taper 2 Kurzspindel MK︱turning speeds 225 - 4.300 U/min︱voltage 400 / 50 Hz Volt︱table: 300 x 240 mm︱column diameter 65 mm︱engine output 0,37 / 0,55 kW︱weight 110 kg︱
          Furnishing: - Large spindle speed range - stepless speed adjustment - machined base plate - Electrically secured spindle protection - Main switch lockable with motor protection switch - Reversing switch for clockwise and counterclockwise rotation - Operating instructions in German Special accessories for an extra charge: - Base cabinet 700 x 600 x 840 mm * Item no .: 09. 434, - Euro
            bore capacity in steel (diameter. 18,0 mm
            throat 190 mm
            bore stroke 80 mm
            morse taper 2 Kurzspindel MK
            turning speeds 225 - 4.300 U/min
            voltage 400 / 50 Hz Volt
            table: 300 x 240 mm
            column diameter 65 mm
            engine output 0,37 / 0,55 kW
            weight 110 kg
            Description :
            Furnishing:
            - Large spindle speed range
            - stepless speed adjustment
            - machined base plate
            - Electrically secured spindle protection
            - Main switch lockable with motor protection switch
            - Reversing switch for clockwise and counterclockwise rotation
            - Operating instructions in German

            Special accessories for an extra charge:
            - Base cabinet 700 x 600 x 840 mm
            * Item no .: 09. 434, - Euro
          Datasheet
          Request / Contact
          used  Bench Drilling Machine BERNARDO GHD 25 TN


          • A + B Werkzeuge Maschinen Handels GmbH
          • Rottweg 17
          • 48683 Ahaus
          • Deutschland

          • (0049)-2561-9384-71
            (0049)-2561-9384-36
          • info@ab-maschinen.de
            www.ab-maschinen.de
          #1008-8092703 · Bench Drilling Machine

          BERNARDO - GHD 25 TN - - -

          Technical details
          bore capacity in steel (diameter) 25,0 mm︱throat 255 mm︱bore stroke 120 mm︱morse taper 3 MK︱turning speeds 105 - 2900 U/min︱voltage 400 / 50 Hz V︱table: 395 x 420 mm︱column diameter 100 mm︱weight 148 kg︱
            bore capacity in steel (diameter. 25,0 mm
            throat 255 mm
            bore stroke 120 mm
            morse taper 3 MK
            turning speeds 105 - 2900 U/min
            voltage 400 / 50 Hz V
            table: 395 x 420 mm
            column diameter 100 mm
            weight 148 kg
          Datasheet
          Request / Contact
          used  Bench Drilling Machine IXION BT 15 STP


          • A + B Werkzeuge Maschinen Handels GmbH
          • Rottweg 17
          • 48683 Ahaus
          • Deutschland

          • (0049)-2561-9384-71
            (0049)-2561-9384-36
          • info@ab-maschinen.de
            www.ab-maschinen.de
          #1008-9093612 · Bench Drilling Machine

          IXION - BT 15 STP - - -

          Technical details
          bore capacity in steel (diameter) 18,0 mm︱throat 215 mm︱bore stroke 100 mm︱spindle taper 2 MK︱table: 310 x 220 mm︱turning speeds 200 - 1800 U/min︱column diameter 75,0 mm︱range L-W-H 300x800x1050 mm︱total power requirement 0,65/1,2 kW︱
          Furnishing: - stepless speed adjustment - Pole changing motor - manual spindle feed - Drill head adjustable in height, via hand crank - machined base plate - Quick release chuck - underframe
            bore capacity in steel (diameter. 18,0 mm
            throat 215 mm
            bore stroke 100 mm
            spindle taper 2 MK
            table: 310 x 220 mm
            turning speeds 200 - 1800 U/min
            column diameter 75,0 mm
            range L-W-H 300x800x1050 mm
            total power requirement 0,65/1,2 kW
            Description :
            Furnishing:
            - stepless speed adjustment
            - Pole changing motor
            - manual spindle feed
            - Drill head adjustable in height, via hand crank
            - machined base plate
            - Quick release chuck
            - underframe
          Datasheet
          Request / Contact

          Drilling and Milling M/C

          used  Drilling and Milling M/C BERNARDO KF 20 L Super


          • A + B Werkzeuge Maschinen Handels GmbH
          • Rottweg 17
          • 48683 Ahaus
          • Deutschland

          • (0049)-2561-9384-71
            (0049)-2561-9384-36
          • info@ab-maschinen.de
            www.ab-maschinen.de
          #1008-8131010 · Drilling and Milling M/C

          BERNARDO - KF 20 L Super - - -

          Technical details
          bore capacity in steel (diameter) 13,0 mm︱x-travel 300 mm︱y-travel 130 mm︱turning speeds 100 - 2500 U/min︱throat 165 mm︱spindle taper MT 3 MK︱table-size 490 x 120 mm︱diameter of hob 30,0 mm︱motor 230 Volt︱total power requirement 0,75 kW︱weight of the machine ca. 50 kg.︱dimensions of the machine ca. 520x500x740 mm︱
            bore capacity in steel (diameter. 13,0 mm
            x-travel 300 mm
            y-travel 130 mm
            turning speeds 100 - 2500 U/min
            throat 165 mm
            spindle taper MT 3 MK
            table-size 490 x 120 mm
            diameter of hob 30,0 mm
            motor 230 Volt
            total power requirement 0,75 kW
            weight of the machine ca. 50 kg.
            dimensions of the machine ca. 520x500x740 mm
          Datasheet
          Request / Contact
          used  Drilling and Milling M/C ACIERA 22 VA


          • A + B Werkzeuge Maschinen Handels GmbH
          • Rottweg 17
          • 48683 Ahaus
          • Deutschland

          • (0049)-2561-9384-71
            (0049)-2561-9384-36
          • info@ab-maschinen.de
            www.ab-maschinen.de
          #1008-9131145 · Drilling and Milling M/C

          ACIERA - 22 VA - - -

          Technical details
          bore capacity in steel (diameter) 22,0 mm︱x-travel 336 mm︱y-travel 190 mm︱table: 580 x 250 mm︱turning speeds 40 - 3600 U/min︱spindle taper MT 3 MK︱throat 300 mm︱quill stroke 120 mm︱threading M18 ︱spindle feeds: 0,02 - 0,6 mm/U︱spindle diameter 65,0 mm︱total power requirement 0,75 / 1,1 kW︱weight of the machine ca. 830 kg︱range L-W-H 1000 x 1300 x 1850 mm︱
          Furnishing: - Drilling & milling machine - with electrical height adjustment - stable sliding cross table - Aciera quick change system - automatic spindle feed - various recording
            bore capacity in steel (diameter. 22,0 mm
            x-travel 336 mm
            y-travel 190 mm
            table: 580 x 250 mm
            turning speeds 40 - 3600 U/min
            spindle taper MT 3 MK
            throat 300 mm
            quill stroke 120 mm
            threading M18
            spindle feeds: 0,02 - 0,6 mm/U
            spindle diameter 65,0 mm
            total power requirement 0,75 / 1,1 kW
            weight of the machine ca. 830 kg
            range L-W-H 1000 x 1300 x 1850 mm
            Description :
            Furnishing:
            - Drilling & milling machine
            - with electrical height adjustment
            - stable sliding cross table
            - Aciera quick change system
            - automatic spindle feed
            - various recording
          Datasheet
          Request / Contact

          Pillar Drilling Machine

          used  Pillar Drilling Machine ARBOGA U 2608


          • A + B Werkzeuge Maschinen Handels GmbH
          • Rottweg 17
          • 48683 Ahaus
          • Deutschland

          • (0049)-2561-9384-71
            (0049)-2561-9384-36
          • info@ab-maschinen.de
            www.ab-maschinen.de
          #1008-9103558 · Pillar Drilling Machine

          ARBOGA - U 2608 - - 2006 -

          Technical details
          bore capacity in steel (diameter) 25,0 mm︱bore spindles - Morse Taper MK 3 ︱table: 500 x 400 mm︱turning speeds 105 - 2.900 U/min︱quill stroke 135 mm︱feed: 0,10 - 0,15 - 0,30 mm︱total power requirement 0,65 - 0,9 kW︱weight 200 kg︱
          Furnishing: - the drill head is 360 ° around the column swiveling and adjustable in height - gear drill - Thread cutter holder with inserts
            bore capacity in steel (diameter. 25,0 mm
            bore spindles - Morse Taper MK 3
            table: 500 x 400 mm
            turning speeds 105 - 2.900 U/min
            quill stroke 135 mm
            feed: 0,10 - 0,15 - 0,30 mm
            total power requirement 0,65 - 0,9 kW
            weight 200 kg
            Description :
            Furnishing:
            - the drill head is 360 ° around the column
            swiveling and adjustable in height
            - gear drill
            - Thread cutter holder with inserts

          Datasheet
          Request / Contact
          used  Pillar Drilling Machine FLOTT P 35 STG-PV/R1


          • A + B Werkzeuge Maschinen Handels GmbH
          • Rottweg 17
          • 48683 Ahaus
          • Deutschland

          • (0049)-2561-9384-71
            (0049)-2561-9384-36
          • info@ab-maschinen.de
            www.ab-maschinen.de
          #1008-9103638 · Pillar Drilling Machine

          FLOTT - P 35 STG-PV/R1 - - 2001 -

          Technical details
          bore capacity in steel (diameter) 35,0 mm︱threading M24 ︱throat 280 mm︱spindle 3 MK︱bore stroke 125 mm︱table: 340 x 420 mm︱speeds 125 - 2000 U/min︱column diameter 110 mm︱distance spindle /table 240 / 790 mm︱total power requirement 1,5 / 2,0 kW︱weight of the machine ca. 275 kg.︱range L-W-H 520 x 850 x 1900 mm︱
          ** from a vocational school - good condition (!!) ** current new price ~ 9.000 euros Furnishing : - state-of-the-art production drill press - mechanical feed 0-300 mm / min. / stepless - Thread cutting device - digital speed display - digital drilling depth display - digital feed display - Free cutting device - Drilling depth switch-off - Drilling depth stop with fine adjustment - Infinitely variable speed control and clockwise / counterclockwise rotation - Height-adjustable work table, with hand crank - unprocessed footplate
            bore capacity in steel (diameter. 35,0 mm
            threading M24
            throat 280 mm
            spindle 3 MK
            bore stroke 125 mm
            table: 340 x 420 mm
            speeds 125 - 2000 U/min
            column diameter 110 mm
            distance spindle /table 240 / 790 mm
            total power requirement 1,5 / 2,0 kW
            weight of the machine ca. 275 kg.
            range L-W-H 520 x 850 x 1900 mm
            Description :
            ** from a vocational school - good condition (!!)
            ** current new price ~ 9.000 euros

            Furnishing :
            - state-of-the-art production drill press
            - mechanical feed 0-300 mm / min. / stepless
            - Thread cutting device
            - digital speed display
            - digital drilling depth display
            - digital feed display
            - Free cutting device
            - Drilling depth switch-off
            - Drilling depth stop with fine adjustment
            - Infinitely variable speed control and clockwise / counterclockwise rotation
            - Height-adjustable work table, with hand crank
            - unprocessed footplate
          Datasheet
          Request / Contact
          •   
          •   
          • 1  
          • 2  
          • 3  
          • 4  
          • 5  
          • 6  
          •   
          •   

            Trader Profile:   A + B Werkzeuge Maschinen Handels GmbH

          Contact Trader



            A + B Werkzeuge Maschinen Handels GmbH
           Rottweg 17
            48683 Ahaus
            Deutschland
            (0049)-2561-9384-71">(0049)-2561-9384-71
            (0049)-2561-9384-36
            info@ab-maschinen.de
            www.ab-maschinen.de

          Profile of Trader




          A + B Werkzeuge Maschinen Handels GmbH   48683 Ahaus Rottweg 17 Deutschland
          A + B Werkzeuge Maschinen Handels GmbH

          Rottweg 17



          Contact Trader


            A + B Werkzeuge Maschinen Handels GmbH
           Rottweg 17
            48683 Ahaus
            Deutschland
            (0049)-2561-9384-71
            (0049)-2561-9384-36
            info@ab-maschinen.de
            www.ab-maschinen.de
            Contact person:

           
          * über 500 Maschinen lagernd -

          Gerne führen wir Ihnen Ihre gewünschte Maschine unter Strom vor *




          Machine category


          · Abkantpresse - hydraulisch · Absaugung · Alu-Kreissäge · Aufspanntisch · Aufspannwinkel · Ausklinkmaschine · Bandschleifmaschine · Bandsäge · Bandsäge - Vertikal · Behälterdrehvorrichtung · Biegemaschine horizontal · Bohr- und Fräsmaschine · Bohrerschleifmaschine · Breitband-Schleifmaschine · Bügelsäge · Bürstenentgrater · Differenzwegpresse · Doppelschleifbock · Dornpresse · Dornrohrbiegemaschine · Drehmaschine-konventionell-elektronisch · Dreiwalzen - Blechbiegemaschine · Exzenterpresse - Einständer · Flachschleifmaschine · Fräseinrichtung · Fräsmaschine - Universal · Gabelhubwagen - von Hand · Gewindeschneidmaschine · Handhebel-Schere · Härteofen · Kaltkreissäge · Kettenzug - elektrisch · Kettenzug - von Hand · Kippvorrichtung · Kompressor · Krananlage · Kreisschere · Kreuztisch · Laserschneidmaschine · Lochstanze · Markier und Meßmaschine · Messplatte · Nutenziehmaschine · Palettenregal · Plasmaschneidgerät · Polierbock · Profilstahlschere · Punktschweißmaschine · Radialbohrmaschine · Ring- Profil- Biegemaschine · Rohrbiegemaschine · Rollenbahnen / Anschlag-Systeme · Rollenbock · Rundschleifmaschine - Universal · Sandstrahlanlage · Scherenhubtisch · Schleifapparat · Schleifbock · Schnellradialbohrmaschine · Schraubstock · Schubladenschrank · Schutzschirm · Schweißanlage · Schweißdrehtisch · Schweißrauchabsaugung · Schwenkbiegemaschine · Sickenmaschine · Stanz- und Nibbelmaschine · Stapelboxen · Säulenbohrmaschine · Säulenschwenkkran · Tafelschere - hydraulisch · Tafelschere - mechanisch · Tischbohrmaschine · Topfschleifmaschine · Transportwagen · Trockenofen · Trowalisiermaschine · Unterstellbock · Vakuum-Lifter · Vierwalzen - Blechbiegemaschine · Werkbänke · Werkstattpresse - hydraulisch · Werkstattpressen - hydraulisch · Werkzeugwagen · Zubehör ·