European network of stockholding machinery dealers

Bitte einen Suchbegriff eingeben - Please enter a search term
Category:
    Manufacturer:
      Machines:
        Trader:

          MS Maschinenhandel GmbH - Stockist for used machines

          Machinelist:


          Portal - Machining Center

          used  Portal - Machining Center WALDRICH-COBURG MULTITEC 2500 AP


          • MS Maschinenhandel GmbH
          • Unterdorf 34
          • 6532 Ladis
          • Österreich

          • +43 547221907
            +43 54722190722
          • info@ms-maschinen.at
            www.ms-maschinen.at
          #2034-28 · Portal - Machining Center

          WALDRICH-COBURG - MULTITEC 2500 AP - - 2002 - SIEMENS 840 D

          Technical details
          x-axis 4000 mm︱y-axis 3500 mm︱z-axis 1500 mm︱Control SIEMENS 840 D ︱w-axis 1500 mm︱column daylight 2500 mm︱surface area 3000 x 2000 mm︱workpiece weight 10000 kg︱spindle turning speed range 5-6000 U/min︱transmission ratio 2 ︱power capacity - milling spindle 45 kW︱dist. cutter spindle - workpiece spindle 3500 mm︱max. torque on the spindle 1250 Nm︱tool change unit 200 -fach︱tool diameter 135 / 250 mm︱weight of tools max. 50 kg︱tool length - max. 400 mm︱tool taper ISO SK-50 ︱total power requirement kW︱
            x-axis 4000 mm
            y-axis 3500 mm
            z-axis 1500 mm
            Control SIEMENS 840 D
            w-axis 1500 mm
            column daylight 2500 mm
            surface area 3000 x 2000 mm
            workpiece weight 10000 kg
            spindle turning speed range 5-6000 U/min
            transmission ratio 2
            power capacity - milling spindle 45 kW
            dist. cutter spindle - workpiece. 3500 mm
            max. torque on the spindle 1250 Nm
            tool change unit 200 -fach
            tool diameter 135 / 250 mm
            weight of tools max. 50 kg
            tool length - max. 400 mm
            tool taper ISO SK-50
          Datasheet
          Request / Contact

          Planer-Type Milling M/C - Double Column

          used  Planer-Type Milling M/C - Double Column WALDRICH-COBURG Valutec


          • MS Maschinenhandel GmbH
          • Unterdorf 34
          • 6532 Ladis
          • Österreich

          • +43 547221907
            +43 54722190722
          • info@ms-maschinen.at
            www.ms-maschinen.at
          #2034-151 · Planer-Type Milling M/C - Double Column

          WALDRICH-COBURG - Valutec - - 2005 - SIEMENS 840D

          Technical details
          x-travel 6000 mm︱y-travel 3500 mm︱z-travel 1500 mm︱Control SIEMENS 840D ︱table load 12 t︱height over floor 6300 mm︱table dimension - longitudinal 5000 mm︱table dimension - cross 2500 mm︱no. of tables 2 ︱tool change unit 200 -fach︱weight of tools max. 30 kg︱tool taper HSK A 100 ︱diameter of tools max. 250 mm︱workpiece length 500 mm︱spindle turning speed range 5-6000 U/min︱c-axis -10 bis 370 °︱b-axis 5 bis -95 °︱column daylight 3000 mm︱distance spindle nose and table 1500 mm︱total power requirement kW︱
            x-travel 6000 mm
            y-travel 3500 mm
            z-travel 1500 mm
            Control SIEMENS 840D
            table load 12 t
            height over floor 6300 mm
            table dimension - longitudinal 5000 mm
            table dimension - cross 2500 mm
            no. of tables 2
            tool change unit 200 -fach
            weight of tools max. 30 kg
            tool taper HSK A 100
            diameter of tools max. 250 mm
            workpiece length 500 mm
            spindle turning speed range 5-6000 U/min
            c-axis -10 bis 370 °
            b-axis 5 bis -95 °
            column daylight 3000 mm
            distance spindle nose and table 1500 mm
          Datasheet
          Request / Contact
          used  Planer-Type Milling M/C - Double Column WALDRICH-COBURG POWERTEC 4000 AP


          • MS Maschinenhandel GmbH
          • Unterdorf 34
          • 6532 Ladis
          • Österreich

          • +43 547221907
            +43 54722190722
          • info@ms-maschinen.at
            www.ms-maschinen.at
          #2034-29 · Planer-Type Milling M/C - Double Column

          WALDRICH-COBURG - POWERTEC 4000 AP - - 1995 - SIEMENS 840C

          Technical details
          x-travel 14000 mm︱y-travel 5000 mm︱z-travel 1500 mm︱w-axis 3000 mm︱column daylight 4000 mm︱column: max. dist. table - spindle nose 4500 mm︱workpiece weight 100 t︱table dimension - longitudinal 9000 mm︱table dimension - cross 3000 mm︱spindle taper ISO SK 50 ︱spindle turning speed range 2-2500 U/min︱spindle motor 113 kW︱spindle diameter 200 mm︱max. torque on the spindle 9500 Nm︱feed in x - axis 1-10000 mm/min︱feed in y - axis 1-10000 mm/min︱feed range Z-direction 1-10000 mm/min︱rapid traverse 20000 mm/min︱height over floor 8600 mm︱control SIEMENS 840C
          ATTACHMENTS angular milling head yes autom. tool clamping yes ball spindles yes guideway covers yes coolant unit yes high pressure cooling syst. (through spindle) yes closed cabin yes chip conveyor yes TECHNICAL DESCRIPTION PLANER TYPE MACHINING CENTER - EACH WITH 3 PALLETS 9000 x 3000 mm: - Tool changer with 420 tools - Head pick-up system - Video monitoring via camera - High pressure lubrication unit for inner cooling 70bar AVAILABLE HEAD UNITS: - Fixed angle head HS800C600 105 Kw 600 long - Fixed angle head HSD350C850 50 Kw 850 long - Fixed angle head HSD 40C880 12 Kw 880 long - Fixed angle head HSD 190C1000 30 Kw 1000 long - Vertical spindle unit VS800C 105 Kw 900 long - Universal spindle unit USIO40C 20 Kw B-axis rotatable at 1° at a time - Angle spindle unit SO800C905 - 22,5° fix - Angle spindle unit HSE1200CS -25° fix - Universal spindle unit (fork milling) USP475C 75 Kw 1/2° Hirth One additional drilling extension SE 350C plus 1 SE500C. DESCRIPTION OF CONDITION In 2011/2012 these 2 identical machines were retrofitted The milling length was extended to 14meters and an automatic changing system for table pallets was installed. Both machines can be seen under power by prior appointment.
            x-travel 14000 mm
            y-travel 5000 mm
            z-travel 1500 mm
            w-axis 3000 mm
            column daylight 4000 mm
            column: max. dist. table - spind. 4500 mm
            workpiece weight 100 t
            table dimension - longitudinal 9000 mm
            table dimension - cross 3000 mm
            spindle taper ISO SK 50
            spindle turning speed range 2-2500 U/min
            spindle motor 113 kW
            spindle diameter 200 mm
            max. torque on the spindle 9500 Nm
            feed in x - axis 1-10000 mm/min
            feed in y - axis 1-10000 mm/min
            feed range Z-direction 1-10000 mm/min
            rapid traverse 20000 mm/min
            height over floor 8600 mm
            control SIEMENS 840C
            Description :
            ATTACHMENTS
            angular milling head yes
            autom. tool clamping yes
            ball spindles yes
            guideway covers yes
            coolant unit yes
            high pressure cooling syst. (through spindle) yes
            closed cabin yes
            chip conveyor yes


            TECHNICAL DESCRIPTION
            PLANER TYPE MACHINING CENTER - EACH WITH 3 PALLETS 9000 x 3000 mm:
            - Tool changer with 420 tools
            - Head pick-up system
            - Video monitoring via camera
            - High pressure lubrication unit for inner cooling 70bar

            AVAILABLE HEAD UNITS:
            - Fixed angle head HS800C600 105 Kw 600 long
            - Fixed angle head HSD350C850 50 Kw 850 long
            - Fixed angle head HSD 40C880 12 Kw 880 long
            - Fixed angle head HSD 190C1000 30 Kw 1000 long
            - Vertical spindle unit VS800C 105 Kw 900 long
            - Universal spindle unit USIO40C 20 Kw B-axis rotatable at 1° at a time
            - Angle spindle unit SO800C905 - 22,5° fix
            - Angle spindle unit HSE1200CS -25° fix
            - Universal spindle unit (fork milling) USP475C 75 Kw 1/2° Hirth

            One additional drilling extension SE 350C plus 1 SE500C.

            DESCRIPTION OF CONDITION
            In 2011/2012 these 2 identical machines were retrofitted
            The milling length was extended to 14meters and an automatic changing system
            for table pallets was installed.
            Both machines can be seen under power by prior appointment.

          Datasheet
          Request / Contact
          used  Planer-Type Milling M/C - Double Column WALDRICH-COBURG 14-10 FP200NC


          • MS Maschinenhandel GmbH
          • Unterdorf 34
          • 6532 Ladis
          • Österreich

          • +43 547221907
            +43 54722190722
          • info@ms-maschinen.at
            www.ms-maschinen.at
          #2034-147 · Planer-Type Milling M/C - Double Column

          WALDRICH-COBURG - 14-10 FP200NC - - 1986 / 2010 retrofit - HEIDENHAIN iTNC 530

          Technical details
          x-travel 6200 mm︱y-travel 3200 mm︱z-travel 1000 mm︱Control HEIDENHAIN iTNC 530 ︱number of spindle speeds 2000 U/min.︱table dimension - longitudinal 3500 mm︱table dimension - cross 2000 mm︱table load 20 t︱T-slot - distance 125 mm︱T-slot - width 28 mm︱tool taper SK-50 ︱tool change unit 300 -fach︱column daylight 2350 mm︱coolant IKZ 60 bar︱w-axis 1500 mm︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. 12700 x 11000 x 6000 m︱
            x-travel 6200 mm
            y-travel 3200 mm
            z-travel 1000 mm
            Control HEIDENHAIN iTNC 530
            number of spindle speeds 2000 U/min.
            table dimension - longitudinal 3500 mm
            table dimension - cross 2000 mm
            table load 20 t
            T-slot - distance 125 mm
            T-slot - width 28 mm
            tool taper SK-50
            tool change unit 300 -fach
            column daylight 2350 mm
            coolant IKZ 60 bar
            w-axis 1500 mm
            dimensions of the machine ca. 12700 x 11000 x 6000 m
          Datasheet
          Request / Contact
          •   
          •   
          • 1  
          •   
          •   

            Trader Profile:   MS Maschinenhandel GmbH

          Contact Trader



            MS Maschinenhandel GmbH
           Unterdorf 34
            6532 - Ladis
            Österreich
            +43 547221907">+43 547221907
            +43 54722190722
            info@ms-maschinen.at
            www.ms-maschinen.at

          Profile of Trader

          ProdEq Group - Partner of the Industry.
          Wholesale trading of metalworking machinery.
           
          We sell and buy:
          • machine tools
          • metal manufacturing machinery
          • used industrial equipment
          • complete plants
          Internationality:
          Our international sales network provides access to the global markets of used / secondhand machinery.


          Online Machinery Directory:
          Search and find your desired equipment and machine tool (CNC or non-CNC) in our online directory. All machines for sale are published with comprehensive information.

          Large projects - small projects:
          We realize auctions and liquidations and carry out the sales of your surplus equipment. Please contact us upon any upcoming sales of surplus assets. We trade single machines as well as complete industrial plants.

          Expertise:
          Regardlessly if you sell or buy used machines or equipment. Base your selling decision on our appraisal and your buying decision on our technical advice.

          More than secondhand:
          We also trade a selected portfolio of new equipment, just ask us.


          Trade and service:
          Ask for after sales services as disassembly, overhauls, transportation, import & export, and financing.

          Machinery & Equipment:


          ProdEq Trading GmbH
          Reckholder 1, 9527 Niederhelfenschwil, Switzerland


          ProdEq Maschinenhandel GmbH
          Unterdorf 34, 6532 Ladis, Austria


          ProdEq Deutschland GmbH
          Weberweg 2, 42499 Hückeswagen, Germany


          Post-Venta Carreras S.A.
          Pol. Ind. Els Plans d'Arau, C/ Nicolau Copèrnic 2, 08787 La Pobla de Claramunt, Spain


          Guerrieri s.r.l.
          Piazza Giosuè Carducci 6, 21100 Varese (VA), Italy


          ProdEq d.o.o. Trgovina z industrijskimi stroji
          Opekarniska 4, 2327 Race, Slovenia


          Representative Office ProdEq Maschinenhandel GmbH
          16110 Nilüfer/Bursa, Türkei


          Other representative offices: Mexico, Iran
          Please contact one of the above ProdEq offices for more information.




          MS Maschinenhandel GmbH   6532 - Ladis Unterdorf 34 Österreich
          MS Maschinenhandel GmbH

          Unterdorf 34



          Contact Trader


            MS Maschinenhandel GmbH
           Unterdorf 34
            6532 - Ladis
            Österreich
            +43 547221907
            +43 54722190722
            info@ms-maschinen.at
            www.ms-maschinen.at
            Contact person:

            USt.Id.Nr.: ATU 62723057
          Firmenbuchnummer: FN 280087 v
          USt.Id.Nr.: DE 257366940 / Steuernummer: 182 / 123 / 26816
          EORI-Nr.: ATEOS1000012994





          Machine category


          Abkantpresse - hydraulisch · Bandsäge · Bearbeitungszentrum - Universal · Bearbeitungszentrum - Vertikal · Bettfräsmaschine - Universal · Brennschneidemaschine · CNC Dreh- und Fräszentrum · Doppel-Gehrungsäge · Drehmaschine - zyklengesteuert · Fahrständerfräsmaschine · Feinstanzpresse · Flachschleifmaschine - Horizontal · Fräsmaschine - Universal · Fräsmaschine - Vertikal · Honmaschine - Innen - Horizontal · Kompressor · Kompressor und Druckluftaufbereitung · Koordinatenmeßmaschine · Langdrehautomat · Laserschneidmaschine · Leit- und Zugspindeldrehmaschine · Messmaschine · Meßmittel · Portal - Bearbeitungszentrum · Portalfräsmaschine · Radialbohrmaschine · Spritzgiessmaschine bis 5000 KN · Tafelschere - mechanisch · Tuschierpresse · Wasserstrahlschneidanlage · Werkzeug Voreinstellgerät ·