European network of stockholding machinery dealers

Bitte einen Suchbegriff eingeben - Please enter a search term
Category:
    Manufacturer:
      Machines:
        Trader:

          Feyen Maschinen GmbH - Stockist for used machines

          Machinelist:


          Cold Circular Saw

          used  Cold Circular Saw HUVEMA HU 370 PSK


          • Feyen Maschinen GmbH
          • Gelleperstr. 10
          • 47809 Krefeld
          • Deutschland

          • 0049 (0)2151/5267-0
            0049 (0)2151/5267-39
          • info@feyen.de
            www.feyen.de
          #1053-003387 · Cold Circular Saw

          HUVEMA - HU 370 PSK - - 2019 -

          Technical details
          saw-blade dia. 370 mm︱cutting capacity - round 115/ 90° mm︱cutting capacity - square 110 x 110 /90° mm︱cutting capacity - flat 110 x 110 / 90° mm︱cutting capacity - flat 100 x 100 / 45° mm︱cutting capacity - round 115 / 45° mm︱cutting capacity - square 100 x 100 /45° mm︱saw blade turning speeds 22 / 44 U/min︱voltage 400 V / 50 Hz︱Motor output 3 kW︱machine weight ab. 270 kg︱Dimensions (L/W/H) 980 x 790 x 780 mm︱
          • saw is fitted on a lower frame, • 2-step motor, • pneumatical quick clamping vise, • material back stop, • coolant device, • mitre ability: 40° left, 45° right
            saw-blade dia. 370 mm
            cutting capacity - round 115/ 90° mm
            cutting capacity - square 110 x 110 /90° mm
            cutting capacity - flat 110 x 110 / 90° mm
            cutting capacity - flat 100 x 100 / 45° mm
            cutting capacity - round 115 / 45° mm
            cutting capacity - square 100 x 100 /45° mm
            saw blade turning speeds 22 / 44 U/min
            voltage 400 V / 50 Hz
            Motor output 3 kW
            machine weight ab. 270 kg
            Dimensions (L/W/H) 980 x 790 x 780 mm
            Description :
            • saw is fitted on a lower frame,
            • 2-step motor,
            • pneumatical quick clamping vise,
            • material back stop,
            • coolant device,
            • mitre ability: 40° left, 45° right

          Datasheet
          Request / Contact
          used  Cold Circular Saw HUVEMA HU 315 ASK


          • Feyen Maschinen GmbH
          • Gelleperstr. 10
          • 47809 Krefeld
          • Deutschland

          • 0049 (0)2151/5267-0
            0049 (0)2151/5267-39
          • info@feyen.de
            www.feyen.de
          #1053-003388 · Cold Circular Saw

          HUVEMA - HU 315 ASK - - 2016 -

          Technical details
          saw-blade dia. 315 mm︱cutting capacity - round 100/ 90° mm︱cutting capacity - square 90 x 90 /90° mm︱cutting capacity - flat 85 x 110 / 90° mm︱cutting capacity - flat 85 x 85 / 45° mm︱cutting capacity - round 100 / 45° mm︱cutting capacity - square 85 x 110 /45° mm︱saw blade turning speeds 25 / 50 U/min︱voltage 400 V / 50 Hz︱Motor output 1 kW︱machine weight ab. 240 kg︱Dimensions (L/W/H) 980 x 790 x 780 mm︱
          • saw is fitted on a lower frame, • 2-step motor, • pneumatical quick clamping vise, • material back stop, • coolant device, • mitre ability: 40° left, 45° right
            saw-blade dia. 315 mm
            cutting capacity - round 100/ 90° mm
            cutting capacity - square 90 x 90 /90° mm
            cutting capacity - flat 85 x 110 / 90° mm
            cutting capacity - flat 85 x 85 / 45° mm
            cutting capacity - round 100 / 45° mm
            cutting capacity - square 85 x 110 /45° mm
            saw blade turning speeds 25 / 50 U/min
            voltage 400 V / 50 Hz
            Motor output 1 kW
            machine weight ab. 240 kg
            Dimensions (L/W/H) 980 x 790 x 780 mm
            Description :
            • saw is fitted on a lower frame,
            • 2-step motor,
            • pneumatical quick clamping vise,
            • material back stop,
            • coolant device,
            • mitre ability: 40° left, 45° right

          Datasheet
          Request / Contact
          used  Cold Circular Saw KALTENBACH KKS


          • Feyen Maschinen GmbH
          • Gelleperstr. 10
          • 47809 Krefeld
          • Deutschland

          • 0049 (0)2151/5267-0
            0049 (0)2151/5267-39
          • info@feyen.de
            www.feyen.de
          #1053-003075 · Cold Circular Saw

          KALTENBACH - KKS - - 1970 -

          Technical details
          saw blade diameter 350 mm︱cutting diameter 100 mm︱mitre joint cuts -/+ degrees 45 °︱total power requirement kW︱weight of the machine ca. 0,7 t︱dimensions of the machine ca. 1,1 x 1 x 1,8 m︱
          • pneumatical clamping device
            saw blade diameter 350 mm
            cutting diameter 100 mm
            mitre joint cuts -/+ degrees 45 °
            weight of the machine ca. 0,7 t
            dimensions of the machine ca. 1,1 x 1 x 1,8 m
            Description :
            • pneumatical clamping device
          Datasheet
          Request / Contact

          Keyseating Machine

          used  Keyseating Machine WGW NZH 90 / 430


          • Feyen Maschinen GmbH
          • Gelleperstr. 10
          • 47809 Krefeld
          • Deutschland

          • 0049 (0)2151/5267-0
            0049 (0)2151/5267-39
          • info@feyen.de
            www.feyen.de
          #1053-002685 · Keyseating Machine

          WGW - NZH 90 / 430 - - 1965 -

          Technical details
          groove width 3 - 90 mm︱drawing length 430 mm︱working speed 4 - 12 m/min︱slot-milling length 400 mm︱return speed 15 m/min︱total power requirement 5,5 kW︱weight of the machine ca. 1,4 t︱dimensions of the machine ca. 1,3 x 1,7 x 1,5 m︱
          • div. pull broaches and guidances
            groove width 3 - 90 mm
            drawing length 430 mm
            working speed 4 - 12 m/min
            slot-milling length 400 mm
            return speed 15 m/min
            total power requirement 5,5 kW
            weight of the machine ca. 1,4 t
            dimensions of the machine ca. 1,3 x 1,7 x 1,5 m
            Description :
            • div. pull broaches and guidances
          Datasheet
          Request / Contact

          Thread-Cutting Machine

          used  Thread-Cutting Machine HUVEMA AQ -16-950


          • Feyen Maschinen GmbH
          • Gelleperstr. 10
          • 47809 Krefeld
          • Deutschland

          • 0049 (0)2151/5267-0
            0049 (0)2151/5267-39
          • info@feyen.de
            www.feyen.de
          #1053-010101 · Thread-Cutting Machine

          HUVEMA - AQ -16-950 - - neu -

          Technical details
          thread dia. 16 mm︱threading length 20 mm︱turning speeds 300 U/min︱working area 100 - 950 mm︱weight of the machine ca. 25 Kg︱dimensions of the machine ca. m︱
          • pneumatical thread cutting device, order-No. 31689,
            thread dia. 16 mm
            threading length 20 mm
            turning speeds 300 U/min
            working area 100 - 950 mm
            weight of the machine ca. 25 Kg
            Description :
            • pneumatical thread cutting device,
            order-No. 31689,
          Datasheet
          Request / Contact
          used  Thread-Cutting Machine HUVEMA AT12/II


          • Feyen Maschinen GmbH
          • Gelleperstr. 10
          • 47809 Krefeld
          • Deutschland

          • 0049 (0)2151/5267-0
            0049 (0)2151/5267-39
          • info@feyen.de
            www.feyen.de
          #1053-010085 · Thread-Cutting Machine

          HUVEMA - AT12/II - - 2020 -

          Technical details
          thread dia. 12 mm︱threading length 20 mm︱turning speeds 400 U/min︱working area 500 - 1600 mm︱weight of the machine ca. 25 Kg︱dimensions of the machine ca. m︱
          • pneumatical thread cutting device, M3 - M12, • with 6 adapters of thread cuttings, Size 1, • control valve with lubrication, • order no. 31681,
            thread dia. 12 mm
            threading length 20 mm
            turning speeds 400 U/min
            working area 500 - 1600 mm
            weight of the machine ca. 25 Kg
            Description :
            • pneumatical thread cutting device, M3 - M12,
            • with 6 adapters of thread cuttings, Size 1,
            • control valve with lubrication,
            • order no. 31681,
          Datasheet
          Request / Contact
          used  Thread-Cutting Machine HUVEMA AT16/II


          • Feyen Maschinen GmbH
          • Gelleperstr. 10
          • 47809 Krefeld
          • Deutschland

          • 0049 (0)2151/5267-0
            0049 (0)2151/5267-39
          • info@feyen.de
            www.feyen.de
          #1053-010048 · Thread-Cutting Machine

          HUVEMA - AT16/II - - 2020 -

          Technical details
          thread dia. 16 mm︱threading length 20 mm︱turning speeds 400 U/min︱working area 200 - 1900 mm︱weight of the machine ca. t︱dimensions of the machine ca. m︱
          • pneumatical thread cutting device, order-No. 31689,
            thread dia. 16 mm
            threading length 20 mm
            turning speeds 400 U/min
            working area 200 - 1900 mm
            Description :
            • pneumatical thread cutting device,
            order-No. 31689,
          Datasheet
          Request / Contact

          Tryout Press - hydraulic

          used  Tryout Press - hydraulic PROFIPRESS 30M/H-2


          • Feyen Maschinen GmbH
          • Gelleperstr. 10
          • 47809 Krefeld
          • Deutschland

          • 0049 (0)2151/5267-0
            0049 (0)2151/5267-39
          • info@feyen.de
            www.feyen.de
          #1053-010023 · Tryout Press - hydraulic

          PROFIPRESS - 30M/H-2 - - neu -

          Technical details
          pressure 30 t︱stroke 400 mm︱table surface area 700 x 445 mm︱pressing speed 2,6 mm/sec︱feed speeds 9,9 mm/sec︱return speed 12,1 mm/sec︱total power requirement 1,5 kW︱weight of the machine ca. 0,4 t︱dimensions of the machine ca. 1,4 x 0,75 x 2,1 m︱
          • Work shop press with hydraulic motor and manual pump, • fixed cylinder and 2 speeds,
            pressure 30 t
            stroke 400 mm
            table surface area 700 x 445 mm
            pressing speed 2,6 mm/sec
            feed speeds 9,9 mm/sec
            return speed 12,1 mm/sec
            total power requirement 1,5 kW
            weight of the machine ca. 0,4 t
            dimensions of the machine ca. 1,4 x 0,75 x 2,1 m
            Description :
            • Work shop press with hydraulic motor and manual pump,
            • fixed cylinder and 2 speeds,
          Datasheet
          Request / Contact
          used  Tryout Press - hydraulic PROFIPRESS 300T M/H-M/C2, D=1400


          • Feyen Maschinen GmbH
          • Gelleperstr. 10
          • 47809 Krefeld
          • Deutschland

          • 0049 (0)2151/5267-0
            0049 (0)2151/5267-39
          • info@feyen.de
            www.feyen.de
          #1053-010055 · Tryout Press - hydraulic

          PROFIPRESS - 300T M/H-M/C2, D=1400 - - 2021 -

          Technical details
          pressure 300 t︱stroke 400 mm︱table surface area 1400 x 680 mm︱feed under pressure 1,8 mm/sec︱feed down 7,2 mm/sec︱feed up 9,2 mm/sec︱column daylight 1400 mm︱total power requirement 3 kW︱weight of the machine ca. 3 t︱dimensions of the machine ca. 2,3 x 0,9 x 2,1 m︱
          • moveable cylinder, • additional manual pump, • CE
            pressure 300 t
            stroke 400 mm
            table surface area 1400 x 680 mm
            feed under pressure 1,8 mm/sec
            feed down 7,2 mm/sec
            feed up 9,2 mm/sec
            column daylight 1400 mm
            total power requirement 3 kW
            weight of the machine ca. 3 t
            dimensions of the machine ca. 2,3 x 0,9 x 2,1 m
            Description :
            • moveable cylinder,
            • additional manual pump,
            • CE
          Datasheet
          Request / Contact
          used  Tryout Press - hydraulic PROFIPRESS 30 TON HF2


          • Feyen Maschinen GmbH
          • Gelleperstr. 10
          • 47809 Krefeld
          • Deutschland

          • 0049 (0)2151/5267-0
            0049 (0)2151/5267-39
          • info@feyen.de
            www.feyen.de
          #1053-010079 · Tryout Press - hydraulic

          PROFIPRESS - 30 TON HF2 - - 2021 -

          Technical details
          pressure 30 t︱stroke 160 mm︱table surface area 560 x 255 mm︱weight of the machine ca. 0,2 t︱dimensions of the machine ca. 0,83 x 0,64x 2,05 m︱
          • Hand- and foot operated • integrated pressure manometer • Chrome piston • automatic piston return • Set of V-Blocks
            pressure 30 t
            stroke 160 mm
            table surface area 560 x 255 mm
            weight of the machine ca. 0,2 t
            dimensions of the machine ca. 0,83 x 0,64x 2,05 m
            Description :
            • Hand- and foot operated
            • integrated pressure manometer
            • Chrome piston
            • automatic piston return
            • Set of V-Blocks
          Datasheet
          Request / Contact
          used  Tryout Press - hydraulic HUVEMA HU 100 MMH


          • Feyen Maschinen GmbH
          • Gelleperstr. 10
          • 47809 Krefeld
          • Deutschland

          • 0049 (0)2151/5267-0
            0049 (0)2151/5267-39
          • info@feyen.de
            www.feyen.de
          #1053-010091 · Tryout Press - hydraulic

          HUVEMA - HU 100 MMH - - 2021 -

          Technical details
          feed under pressure 2,7 mm/sec︱pressure 100 t︱stroke 400 mm︱table surface area 920 x 560 mm︱feed down 4,25 mm/sec︱feed up 8,22 mm/sec︱oil pressure max. in the work cylinder 385 bar︱oil volume 26 l︱diameter of piston 125 mm︱column daylight 920 mm︱voltage 400 V/ 50 Hz︱total power requirement 4 kW︱weight of the machine ca. 0,9 t︱dimensions of the machine ca. 1,7 x 0,9 x 2,1 m︱
          • unused workshop press, • manual and hydraulical operation, • pressure cylinder horizontally moveable, • table can be hydraulically adjust in height, • Cylinder Ø 175 mm, piston base Ø 125 mm.
            feed under pressure 2,7 mm/sec
            pressure 100 t
            stroke 400 mm
            table surface area 920 x 560 mm
            feed down 4,25 mm/sec
            feed up 8,22 mm/sec
            oil pressure max. in the work cy. 385 bar
            oil volume 26 l
            diameter of piston 125 mm
            column daylight 920 mm
            voltage 400 V/ 50 Hz
            total power requirement 4 kW
            weight of the machine ca. 0,9 t
            dimensions of the machine ca. 1,7 x 0,9 x 2,1 m
            Description :
            • unused workshop press,
            • manual and hydraulical operation,
            • pressure cylinder horizontally moveable,
            • table can be hydraulically adjust in height,
            • Cylinder Ø 175 mm, piston base Ø 125 mm.
          Datasheet
          Request / Contact
          used  Tryout Press - hydraulic PROFIPRESS 200T M/H-M/C2, D=1300


          • Feyen Maschinen GmbH
          • Gelleperstr. 10
          • 47809 Krefeld
          • Deutschland

          • 0049 (0)2151/5267-0
            0049 (0)2151/5267-39
          • info@feyen.de
            www.feyen.de
          #1053-006071 · Tryout Press - hydraulic

          PROFIPRESS - 200T M/H-M/C2, D=1300 - - 2021 -

          Technical details
          pressure 200 t︱stroke 400 mm︱table surface area 1300x410 mm︱feed under pressure 1,84 mm/sec︱feed down 5,73 mm/sec︱feed up 7,08 mm/sec︱column daylight 1600 mm︱total power requirement 3 kW︱weight of the machine ca. 2,4 t︱dimensions of the machine ca. 2,3 x 0,9 x 2,3 m︱
          • moveable cylinder, • additional manual pump, 2 speeds • CE-marking
            pressure 200 t
            stroke 400 mm
            table surface area 1300x410 mm
            feed under pressure 1,84 mm/sec
            feed down 5,73 mm/sec
            feed up 7,08 mm/sec
            column daylight 1600 mm
            total power requirement 3 kW
            weight of the machine ca. 2,4 t
            dimensions of the machine ca. 2,3 x 0,9 x 2,3 m
            Description :
            • moveable cylinder,
            • additional manual pump, 2 speeds
            • CE-marking
          Datasheet
          Request / Contact
          used  Tryout Press - hydraulic PROFIPRESS 15H


          • Feyen Maschinen GmbH
          • Gelleperstr. 10
          • 47809 Krefeld
          • Deutschland

          • 0049 (0)2151/5267-0
            0049 (0)2151/5267-39
          • info@feyen.de
            www.feyen.de
          #1053-010039 · Tryout Press - hydraulic

          PROFIPRESS - 15H - - 2020 -

          Technical details
          pressure 15 t︱stroke 150 mm︱table surface area 500 x 150 mm︱weight of the machine ca. 0,2 t︱dimensions of the machine ca. 1,4 x 0,75 x 2,1 m︱
          • Work shop press with hydraulic motor and manual pump, • fixed cylinder and 2 speeds,
            pressure 15 t
            stroke 150 mm
            table surface area 500 x 150 mm
            weight of the machine ca. 0,2 t
            dimensions of the machine ca. 1,4 x 0,75 x 2,1 m
            Description :
            • Work shop press with hydraulic motor and manual pump,
            • fixed cylinder and 2 speeds,
          Datasheet
          Request / Contact
          used  Tryout Press - hydraulic HUVEMA HU 200 MMH


          • Feyen Maschinen GmbH
          • Gelleperstr. 10
          • 47809 Krefeld
          • Deutschland

          • 0049 (0)2151/5267-0
            0049 (0)2151/5267-39
          • info@feyen.de
            www.feyen.de
          #1053-003242 · Tryout Press - hydraulic

          HUVEMA - HU 200 MMH - - 2017 -

          Technical details
          pressure 200 t︱stroke 400 mm︱table surface area 1300 x 600 mm︱feed under pressure 1,8 mm/sec︱feed down 7,2 mm/sec︱feed up 9,2 mm/sec︱column daylight 1300 mm︱daylight between the side columns 450 mm︱total power requirement 7,5 kW︱weight of the machine ca. 2,3 t︱dimensions of the machine ca. 2,3 x 0,9 x 2,5 m︱
          • new press • moveable pressure cylinder, • additional manual pump, 2 options of speed • 2 support prisms • CE marking
            pressure 200 t
            stroke 400 mm
            table surface area 1300 x 600 mm
            feed under pressure 1,8 mm/sec
            feed down 7,2 mm/sec
            feed up 9,2 mm/sec
            column daylight 1300 mm
            daylight between the side column. 450 mm
            total power requirement 7,5 kW
            weight of the machine ca. 2,3 t
            dimensions of the machine ca. 2,3 x 0,9 x 2,5 m
            Description :
            • new press
            • moveable pressure cylinder,
            • additional manual pump, 2 options of speed
            • 2 support prisms
            • CE marking
          Datasheet
          Request / Contact
          used  Tryout Press - hydraulic HUVEMA HU 160 MMH


          • Feyen Maschinen GmbH
          • Gelleperstr. 10
          • 47809 Krefeld
          • Deutschland

          • 0049 (0)2151/5267-0
            0049 (0)2151/5267-39
          • info@feyen.de
            www.feyen.de
          #1053-003243 · Tryout Press - hydraulic

          HUVEMA - HU 160 MMH - - 2017 -

          Technical details
          pressure 160 t︱stroke 400 mm︱table surface area 1100 x 635 mm︱pressing speed 6,57 mm/sec︱return speed 11,62 mm/sec︱oil pressure max. in the work cylinder 412 bar︱oil volume 40 l︱dia. of piston 145 mm︱column daylight 1120 mm︱voltage 400 V / 50 Hz︱dist. between pillars (front to rear) 350 mm︱total power requirement 5,5 kW︱weight of the machine ca. 1,2 t︱dimensions of the machine ca. 1,7 x 1,0 x 2,5 m︱
          • unused workshop press, • manual and hydraulical operation, • horizontally moveable pressure cylinder, • working table hydraulical adjustable in height, • cylinder Ø 220 mm, piston base Ø 145 mm. • 2 support prisms • CE marking
            pressure 160 t
            stroke 400 mm
            table surface area 1100 x 635 mm
            pressing speed 6,57 mm/sec
            return speed 11,62 mm/sec
            oil pressure max. in the work cy. 412 bar
            oil volume 40 l
            dia. of piston 145 mm
            column daylight 1120 mm
            voltage 400 V / 50 Hz
            dist. between pillars (front to . 350 mm
            total power requirement 5,5 kW
            weight of the machine ca. 1,2 t
            dimensions of the machine ca. 1,7 x 1,0 x 2,5 m
            Description :
            • unused workshop press,
            • manual and hydraulical operation,
            • horizontally moveable pressure cylinder,
            • working table hydraulical adjustable in height,
            • cylinder Ø 220 mm, piston base Ø 145 mm.
            • 2 support prisms
            • CE marking
          Datasheet
          Request / Contact

          Punching Press

          used  Punching Press GREENLEE 7646


          • Feyen Maschinen GmbH
          • Gelleperstr. 10
          • 47809 Krefeld
          • Deutschland

          • 0049 (0)2151/5267-0
            0049 (0)2151/5267-39
          • info@feyen.de
            www.feyen.de
          #1053-003014 · Punching Press

          GREENLEE - 7646 - - unbekannt/unknown -

          Technical details
          pressure 11 t︱punching cross-cut in cmm diverse ︱stroke 50 mm︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱
          hydraulic punching press With 3 punching tools.
            pressure 11 t
            punching cross-cut in cmm diverse
            stroke 50 mm
            Description :
            hydraulic punching press
            With 3 punching tools.
          Datasheet
          Request / Contact

          Cut-to-Length-Shear

          used  Cut-to-Length-Shear HUBER


          • Feyen Maschinen GmbH
          • Gelleperstr. 10
          • 47809 Krefeld
          • Deutschland

          • 0049 (0)2151/5267-0
            0049 (0)2151/5267-39
          • info@feyen.de
            www.feyen.de
          #1053-002178 · Cut-to-Length-Shear

          HUBER - - - 1980 -

          Technical details
          working width 500 mm︱material thickness 5 mm︱work speed m/min︱Materialvorschub max. 250 mm︱cutting angle bis 45 °︱power capacity 3 kW︱weight 1,5 To︱range L-W-H 3,0 x 1,5 x 1,5 mm︱
          Cutting machine used for sealing materials, stroke length and number of cuttings are adjustable, the cutter can be adjusted to 45 degrees angular, stroke- and transport attachment do the transport of the material, the material will be placed on rolls,
            working width 500 mm
            material thickness 5 mm
            Materialvorschub max. 250 mm
            cutting angle bis 45 °
            power capacity 3 kW
            weight 1,5 To
            range L-W-H 3,0 x 1,5 x 1,5 mm
            Description :
            Cutting machine used for sealing materials,
            stroke length and number of cuttings are adjustable,
            the cutter can be adjusted to 45 degrees angular,
            stroke- and transport attachment do the transport of the material,
            the material will be placed on rolls,
          Datasheet
          Request / Contact

          Folding Machine

          used  Folding Machine HUVEMA EZB 2020 ES


          • Feyen Maschinen GmbH
          • Gelleperstr. 10
          • 47809 Krefeld
          • Deutschland

          • 0049 (0)2151/5267-0
            0049 (0)2151/5267-39
          • info@feyen.de
            www.feyen.de
          #1053-010090 · Folding Machine

          HUVEMA - EZB 2020 ES - - 2022 -

          Technical details
          sheet width 2020 mm︱plate thickness 1,5 mm︱distance between columns 2050 mm︱Daylight opening 100 mm︱total power requirement 0,75 kW︱weight of the machine ca. 1 t︱dimensions of the machine ca. 2,7 x 1 x 1,5 m︱
            sheet width 2020 mm
            plate thickness 1,5 mm
            distance between columns 2050 mm
            Daylight opening 100 mm
            total power requirement 0,75 kW
            weight of the machine ca. 1 t
            dimensions of the machine ca. 2,7 x 1 x 1,5 m
          Datasheet
          Request / Contact
          used  Folding Machine HUVEMA HU 15 ES 1500


          • Feyen Maschinen GmbH
          • Gelleperstr. 10
          • 47809 Krefeld
          • Deutschland

          • 0049 (0)2151/5267-0
            0049 (0)2151/5267-39
          • info@feyen.de
            www.feyen.de
          #1053-010089 · Folding Machine

          HUVEMA - HU 15 ES 1500 - - 2020 -

          Technical details
          sheet width 1500 mm︱plate thickness 1,5 mm︱distance between columns 1500 mm︱bending angle max. 135 °︱total power requirement - kW︱weight of the machine ca. 0,36 t︱dimensions of the machine ca. 1,7 x 0,7 x 1,3 m︱
            sheet width 1500 mm
            plate thickness 1,5 mm
            distance between columns 1500 mm
            bending angle max. 135 °
            total power requirement - kW
            weight of the machine ca. 0,36 t
            dimensions of the machine ca. 1,7 x 0,7 x 1,3 m
          Datasheet
          Request / Contact
          used  Folding Machine HUVEMA HU 2020/2


          • Feyen Maschinen GmbH
          • Gelleperstr. 10
          • 47809 Krefeld
          • Deutschland

          • 0049 (0)2151/5267-0
            0049 (0)2151/5267-39
          • info@feyen.de
            www.feyen.de
          #1053-010138 · Folding Machine

          HUVEMA - HU 2020/2 - - 2020 -

          Technical details
          sheet width 2020 mm︱plate thickness 2 mm︱distance between columns 2030 mm︱bending angle max. 135 °︱total power requirement - kW︱weight of the machine ca. 1,22 t︱dimensions of the machine ca. 2,5 x 1,0 x 1,4 m︱
          Manual folding machine with segmented upper beam, segment size: 25,30,35,40,45,50,75,100,150,200,270, 2 x 400 mm, Height adjustable beams, Adjustable clamping force for thickness of material,
            sheet width 2020 mm
            plate thickness 2 mm
            distance between columns 2030 mm
            bending angle max. 135 °
            total power requirement - kW
            weight of the machine ca. 1,22 t
            dimensions of the machine ca. 2,5 x 1,0 x 1,4 m
            Description :
            Manual folding machine with segmented upper beam,
            segment size: 25,30,35,40,45,50,75,100,150,200,270, 2 x 400 mm,
            Height adjustable beams,
            Adjustable clamping force for thickness of material,
          Datasheet
          Request / Contact
          used  Folding Machine HUVEMA HU 20 DS 1020


          • Feyen Maschinen GmbH
          • Gelleperstr. 10
          • 47809 Krefeld
          • Deutschland

          • 0049 (0)2151/5267-0
            0049 (0)2151/5267-39
          • info@feyen.de
            www.feyen.de
          #1053-010056 · Folding Machine

          HUVEMA - HU 20 DS 1020 - - 2020 -

          Technical details
          sheet width 1020 mm︱plate thickness 2 mm︱distance between columns 1020 mm︱bending angle max. 135 °︱total power requirement 0 kW︱weight of the machine ca. 0,3 t︱dimensions of the machine ca. 1350 x 850 x 1175 m︱
          • maximum bending angle 135° • hand-operated
            sheet width 1020 mm
            plate thickness 2 mm
            distance between columns 1020 mm
            bending angle max. 135 °
            weight of the machine ca. 0,3 t
            dimensions of the machine ca. 1350 x 850 x 1175 m
            Description :
            • maximum bending angle 135°
            • hand-operated
          Datasheet
          Request / Contact

          Hydr. pressbrake

          used  Hydr. pressbrake 100GASPARINI PBS 105


          • Feyen Maschinen GmbH
          • Gelleperstr. 10
          • 47809 Krefeld
          • Deutschland

          • 0049 (0)2151/5267-0
            0049 (0)2151/5267-39
          • info@feyen.de
            www.feyen.de
          #1053-003393 · Hydr. pressbrake

          100GASPARINI - PBS 105 - - 2000 - DELEM DA 65

          Technical details
          pressure 105 t︱chamfer lenght 3100 mm︱distance between columns 2600 mm︱table width 100 mm︱table height 750 mm︱Control DELEM DA 65 ︱dayligth 200 mm︱working feed 0 - 10 mm/sec︱return speed 0-100 mm/sec︱rapid traverse - up max. 100 mm/sec︱voltage 380 V / 50 Hz︱total power requirement 11 kW︱weight of the machine ca. 7,5 t︱dimensions of the machine ca. 4 x 2,2 x 2,8 m︱
          Equipment: • CNC-control DELEM DA65 graphic video • manual back-off turning • upper and lower tool • 2 manual control / foot switch
            pressure 105 t
            chamfer lenght 3100 mm
            distance between columns 2600 mm
            table width 100 mm
            table height 750 mm
            Control DELEM DA 65
            dayligth 200 mm
            working feed 0 - 10 mm/sec
            return speed 0-100 mm/sec
            rapid traverse - up max. 100 mm/sec
            voltage 380 V / 50 Hz
            total power requirement 11 kW
            weight of the machine ca. 7,5 t
            dimensions of the machine ca. 4 x 2,2 x 2,8 m
            Description :
            Equipment:
            • CNC-control DELEM DA65 graphic video
            • manual back-off turning
            • upper and lower tool
            • 2 manual control / foot switch
          Datasheet
          Request / Contact
          used  Hydr. pressbrake LVD PPI 55 /20 MNC 95


          • Feyen Maschinen GmbH
          • Gelleperstr. 10
          • 47809 Krefeld
          • Deutschland

          • 0049 (0)2151/5267-0
            0049 (0)2151/5267-39
          • info@feyen.de
            www.feyen.de
          #1053-002825 · Hydr. pressbrake

          LVD - PPI 55 /20 MNC 95 - - 1995 - MNC95c4

          Technical details
          pressure 55 t︱chamfer lenght 2000 mm︱distance between columns 1640 mm︱throat 250 mm︱control MNC95c4 ︱stroke 125 mm︱daylight opening 325 mm︱closing speed - rapid travel 100 mm/sec︱working feed 14,7 mm/sec︱return speed 92 mm/sec︱hydraulic motor 7,5 kW︱total power requirement 10,5 kW︱weight of the machine ca. 4,3 t︱dimensions of the machine ca. 2,5 x 2,0 x 2,5 m︱
          • 2 hand-operation with foot switch, • safety device, Model: SICK, type V 4000, • controlled R-axis, • man. quick clamping of the upper tool,
            pressure 55 t
            chamfer lenght 2000 mm
            distance between columns 1640 mm
            throat 250 mm
            control MNC95c4
            stroke 125 mm
            daylight opening 325 mm
            closing speed - rapid travel 100 mm/sec
            working feed 14,7 mm/sec
            return speed 92 mm/sec
            hydraulic motor 7,5 kW
            total power requirement 10,5 kW
            weight of the machine ca. 4,3 t
            dimensions of the machine ca. 2,5 x 2,0 x 2,5 m
            Description :
            • 2 hand-operation with foot switch,
            • safety device, Model: SICK, type V 4000,
            • controlled R-axis,
            • man. quick clamping of the upper tool,
          Datasheet
          Request / Contact
          used  Hydr. pressbrake MENGELE D 200 / 25


          • Feyen Maschinen GmbH
          • Gelleperstr. 10
          • 47809 Krefeld
          • Deutschland

          • 0049 (0)2151/5267-0
            0049 (0)2151/5267-39
          • info@feyen.de
            www.feyen.de
          #1053-002959 · Hydr. pressbrake

          MENGELE - D 200 / 25 - - 1980 - CYBELEC, DNC60

          Technical details
          pressure 200 t︱chamfer lenght 3000 mm︱distance between columns 2560 mm︱dayligth 450 mm︱throat 450 mm︱adjustment of stroke 240 mm︱horn length over column outer edge each 175 mm︱table length 3050 mm︱table width 280 mm︱table height over floor 820 mm︱electrics - voltage/frequency 220/50 V/Hz︱control CYBELEC, DNC60 ︱stroke 250 mm︱operating pressure 150 bar︱total power requirement kW︱weight of the machine ca. 15 t︱dimensions of the machine ca. L:4,0 x B:3,2 x H:3,44 m︱
          • hydraulical press brake, • new control CYBELEC DNC60 (in 2005), • lower part of the machine moves down 500 mm to the floor, at the moment the machine is mounted on a double-T-support; • prism and upper part of the machine in 3000 mm length
            pressure 200 t
            chamfer lenght 3000 mm
            distance between columns 2560 mm
            dayligth 450 mm
            throat 450 mm
            adjustment of stroke 240 mm
            horn length over column outer ed. 175 mm
            table length 3050 mm
            table width 280 mm
            table height over floor 820 mm
            electrics - voltage/frequency 220/50 V/Hz
            control CYBELEC, DNC60
            stroke 250 mm
            operating pressure 150 bar
            weight of the machine ca. 15 t
            dimensions of the machine ca. L:4,0 x B:3,2 x H:3,44 m
            Description :
            • hydraulical press brake,
            • new control CYBELEC DNC60 (in 2005),
            • lower part of the machine moves down 500 mm to the floor,
            at the moment the machine is mounted on a double-T-support;
            • prism and upper part of the machine in 3000 mm length
          Datasheet
          Request / Contact
          •   
          •   
          • 1  
          • 2  
          • 3  
          • 4  
          • 5  
          • 6  
          • 7  
          • 8  
          • 9  
          • 10  
          •   
          •   

          Feyen Maschinen GmbH   47809 - Krefeld Gelleperstr. 10 Deutschland
          Feyen Maschinen GmbH

          Gelleperstr. 10



          Contact Trader


            Feyen Maschinen GmbH
           Gelleperstr. 10
            47809 - Krefeld
            Deutschland
            0049 (0)2151/5267-0
            0049 (0)2151/5267-39
            info@feyen.de
            www.feyen.de
            Contact person:

           




          Machine category


          Abkantpresse - hydraulisch · Alu-Kreissäge · Anreißplatte · Antragswerk · Appreturfoulard · Aufspannwinkel · Ausbohrbank · Ausbohrmaschine · Ausklinkmaschine · Bandschleifmaschine · Bandschleifmaschinen · Bandsäge - Automatisch · Bandsäge - horizontal · Bandsägeautomat - Horizontal · Behälterdrehvorrichtung · Bettfräsmaschine - Universal · Bohr- und Fräsmaschine · Bohrerschleifmaschine · Bohrkopf · Bohrwerkstisch · Bohrwürfeltisch · Breitwaschmaschine · Brückenstanze hydraulisch · Crush-Maschine · Doppelschleifbock · Einstellgerät · Elektrofahrzeug · Ersatzteile · Fixatoren · Flachschleifmaschine - Horizontal · Flottenauftragsgerät · Fräsmaschine - Universal · Fräsmaschine - Vertikal · Färbeanlage · Färbefoulard · Gabelhubwagen - Elektro · Gewindeschneidmaschine · Handspindelpresse · Hochleistungsquetschwerk · Jigger · Kaltkreissäge · Konsolfräsmaschine - universal · Koordinatenbohrmaschine · Koordinatenschleifmaschine · Kopierfräsmaschine · Kopierfräsmaschine - vertikal · Kreiselpumpe · Kreisteiltisch · Laborfoulard · Labortrockner · Leit- und Zugspindeldrehmaschine · Lochstanze · LuZ · Mechanikerdrehbank · Messplatte · Motor · Neigungswaage · Nietmaschine · Nutenziehmaschine · Pneumatische Presse · Profil- Ring- Biegemaschine · Profilstahlschere · Punktschweißmaschine · Querteilschere · Radialbohrmaschine · Ring- Profil- Biegemaschine · Roll-Kalander · Rollenbahn - Längenanschlag · Rollendämpfer · Rollenkufe-vertikal · Rundtisch · Rundwalzmaschine · Rührwerk · Sandstrahlanlage · Schnellradialbohrmaschine · Schraubstock · Schweißdrehtisch - rund · Schweißplatte · Schwenkbiegemaschine · Schwerdrehmaschine · Signiermaschine · Stangenzuführung · Starrbettfräsmaschine · Staubabsaugung · Stromaggregat · Stähleschleifmaschine · Säulenbohrmaschine · Tafelschere - hydraulisch · Thermobonding-Kalander · Tischbohrmaschine · Tischbohrwerk · Traktor · Vacuum-Absauganlage · Vertikal - Honmaschine - Innen · Verweilstation · Waage · Warenspeicher · Waschanlage · Waschkufe · Wasserrückkühlanlage · Werkstattpresse - hydraulisch · Werkzeug Voreinstellgerät · Werkzeugfräsmaschine - Universal · Zwischenquetschwerk ·