European network of stockholding machinery dealers

Bitte einen Suchbegriff eingeben - Please enter a search term
Category:
    Manufacturer:
      Machines:
        Trader:

          Roller tracks - stop systems

          Machinelist: Roller tracks / stop systems


          Bandsaw - Horizontal

          used Saws Bandsaw - Horizontal MEP SHARK 512 SXI EVO


          • WMT GmbH & Co.KG
          • Siemensstraße 1
          • 46342 Velen-Ramsdorf
          • Deutschland

          • +49 2863 92477-47
            +49 2863 92477-50
          • info@w-m-t.de
            www.w-m-t.de
          #1108-66330 · Bandsaw - Horizontal

          MEP - SHARK 512 SXI EVO - - NEU -

          Technical details
          cutting diameter 330 mm︱capacity 90 degrees: flat 510 x 320 mm︱capacity 90 degrees: square 320 x 320 mm︱turning speed range: 40 / 80 m/min︱dimensions of saw-band 3440 x 27 x 0,9 mm︱engine output 1,5 / 1,8 kW︱weight 670 kg︱
          Semi-automatic, electro-hydraulic band saw machine for cutting 60° left to 60° right. Versatile machine with a tape of 4640 x 34 x 1.1 mm for the Cutting pipes, profiles and beams up to a maximum cutting range from 510x320 mm to 0°. The control console on a swiveling arm allows for comfortable and safe operation from any position. Electronic inverter for continuous belt speed regulation from 15 to 100 m/min. Large turntable with a diameter of 280 mm and engraved exact fine scaling, easily adjustable and stored.
            cutting diameter 330 mm
            capacity 90 degrees: flat 510 x 320 mm
            capacity 90 degrees: square 320 x 320 mm
            turning speed range: 40 / 80 m/min
            dimensions of saw-band 3440 x 27 x 0,9 mm
            engine output 1,5 / 1,8 kW
            weight 670 kg
            Description :
            Semi-automatic, electro-hydraulic band saw machine for cutting
            60° left to 60° right.
            Versatile machine with a tape of 4640 x 34 x 1.1 mm for the
            Cutting pipes, profiles and beams up to a maximum cutting range
            from 510x320 mm to 0°.
            The control console on a swiveling arm allows for comfortable and
            safe operation from any position.
            Electronic inverter for continuous belt speed regulation
            from 15 to 100 m/min.
            Large turntable with a diameter of 280 mm and engraved
            exact fine scaling, easily adjustable and stored.


        • WMT GmbH & Co.KG
        • Siemensstraße 1
        • 46342 Velen-Ramsdorf
        • Deutschland

        • Datasheet
          Request / Contact
          used Saws Bandsaw - Horizontal MEP SHARK 332-1 SXI EVO


          • WMT GmbH & Co.KG
          • Siemensstraße 1
          • 46342 Velen-Ramsdorf
          • Deutschland

          • +49 2863 92477-47
            +49 2863 92477-50
          • info@w-m-t.de
            www.w-m-t.de
          #1108-66328 · Bandsaw - Horizontal

          MEP - SHARK 332-1 SXI EVO - - NEU -

          Technical details
          cutting diameter 300 mm︱capacity 90 degrees: flat 330 x 260 mm︱capacity 90 degrees: square 260 x 260 mm︱capacity 45 degrees: flat 270 x 200 mm︱capacity 45 degrees: round 260 mm︱capacity 45 degrees: square 250 x 250 mm︱capacity 60 degrees: flat 170 x 170 mm︱capacity 60 degrees: square 170 x 170 mm︱capacity 60 degrees: round 180 mm︱turning speed range: 40 / 80 m/min︱dimensions of saw-band 3320 x 27 x 0,9 mm︱engine output 1,5 / 1,8 kW︱weight 670 kg︱
          Electro-hydraulic semi-automatic band saw SHARK 332 SXI EVO with semi-automatic-dynamic, manual function, has a MEP-28 control for miter cuts from 45° right to 60° left. Some features: New centralized switch console on an articulated arm. Low voltage control panel: Polyester membrane keyboard with thermoformed highlighted Push buttons and actuation control signal. Display to show: * Diagnostics (messages in the user language) * Alarms (description of alarm causes) * State of inputs and outputs * Counting cuts * Time taken for the cut made * Current consumption of the saw blade motor * Saw blade tension * Blade speed * Numerical display of head position. Switch handle IP55 of manual 24V cycle. Complete program of all special cutting cycles. Identification of other possible special cutting cycles for special ones Applications New, latest generation hydraulic control unit, extremely powerful and with low energy consumption. Turntable (on roller bearings of 420 mm with preloaded thrust bearings assembled). Double belt speed (40/80 m/min.) with control Intended to accommodate an electronic inverter for the Continuous regulation of the belt speed from 20 to 90 m/min. Stroke of the saw bow can be programmed directly from the control panel Adaptation to the cutting material. Clamping device can be moved laterally to the left and right Quick release vice. Manually operated strap tension control with display on the screen electronic converter. Base designed to completely contain the coolant, even with maximum angle cuts. The coolant pan (provided with an electric pump for lubrication and Cooling of the saw band) and the chip drawer (can be replaced by a Chip conveyor to be replaced - see special accessories) are in the base frame built-in. Preparation for installing the minimum blade lubrication kit (Optional, in addition to the conventional standard lubrication with emulsion oil. Chip clearing brush. The machine is intended for pallet truck transport. Adjustable length stop for cuts of the same length Material support arm with roller for attaching the loading platform Bimetal saw band for solid and profile material. Tools and instructions for use in the respective user language.
            cutting diameter 300 mm
            capacity 90 degrees: flat 330 x 260 mm
            capacity 90 degrees: square 260 x 260 mm
            capacity 45 degrees: flat 270 x 200 mm
            capacity 45 degrees: round 260 mm
            capacity 45 degrees: square 250 x 250 mm
            capacity 60 degrees: flat 170 x 170 mm
            capacity 60 degrees: square 170 x 170 mm
            capacity 60 degrees: round 180 mm
            turning speed range: 40 / 80 m/min
            dimensions of saw-band 3320 x 27 x 0,9 mm
            engine output 1,5 / 1,8 kW
            weight 670 kg
            Description :
            Electro-hydraulic semi-automatic band saw SHARK 332 SXI EVO with
            semi-automatic-dynamic, manual function, has a MEP-28 control
            for miter cuts from 45° right to 60° left.
            Some features:
            New centralized switch console on an articulated arm.
            Low voltage control panel:
            Polyester membrane keyboard with thermoformed highlighted
            Push buttons and actuation control signal.
            Display to show:
            * Diagnostics (messages in the user language)
            * Alarms (description of alarm causes)
            * State of inputs and outputs
            * Counting cuts
            * Time taken for the cut made
            * Current consumption of the saw blade motor
            * Saw blade tension
            * Blade speed
            * Numerical display of head position.
            Switch handle IP55 of manual 24V cycle.
            Complete program of all special cutting cycles.
            Identification of other possible special cutting cycles for special ones
            Applications
            New, latest generation hydraulic control unit, extremely powerful
            and with low energy consumption.
            Turntable (on roller bearings of 420 mm with preloaded thrust bearings
            assembled).
            Double belt speed (40/80 m/min.) with control
            Intended to accommodate an electronic inverter for the
            Continuous regulation of the belt speed from 20 to 90 m/min.
            Stroke of the saw bow can be programmed directly from the control panel
            Adaptation to the cutting material.
            Clamping device can be moved laterally to the left and right
            Quick release vice.
            Manually operated strap tension control with display on the screen
            electronic converter.
            Base designed to completely contain the coolant,
            even with maximum angle cuts.
            The coolant pan (provided with an electric pump for lubrication and
            Cooling of the saw band) and the chip drawer (can be replaced by a
            Chip conveyor to be replaced - see special accessories) are in the base
            frame
            built-in.
            Preparation for installing the minimum blade lubrication kit
            (Optional, in addition to the conventional standard lubrication with
            emulsion oil.
            Chip clearing brush.
            The machine is intended for pallet truck transport.
            Adjustable length stop for cuts of the same length
            Material support arm with roller for attaching the loading platform
            Bimetal saw band for solid and profile material.
            Tools and instructions for use in the respective user language.


        • WMT GmbH & Co.KG
        • Siemensstraße 1
        • 46342 Velen-Ramsdorf
        • Deutschland

        • Datasheet
          Request / Contact
          used Saws Bandsaw - Horizontal MEP SHARK 382-1 SXI EVO


          • WMT GmbH & Co.KG
          • Siemensstraße 1
          • 46342 Velen-Ramsdorf
          • Deutschland

          • +49 2863 92477-47
            +49 2863 92477-50
          • info@w-m-t.de
            www.w-m-t.de
          #1108-66329 · Bandsaw - Horizontal

          MEP - SHARK 382-1 SXI EVO - - NEU -

          Technical details
          cutting diameter 280 mm︱capacity 90 degrees: flat 380 x 260 mm︱capacity 90 degrees: square 260 x 260 mm︱turning speed range: 40 / 80 m/min︱dimensions of saw-band 3440 x 27 x 0,9 mm︱engine output 1,5 / 1,8 kW︱weight 670 kg︱
          Electro-hydraulic, semi-automatic band saw with additional manual and semi-automatic-dynamic function, for cuts from 45° right to 60° left. Some features: Pivoting control panel on vertical post. 420 mm large rotary table on roller bearings with preloaded thrust bearing and replaceable steel inserts. Double belt speed (40/80 m/min.)
            cutting diameter 280 mm
            capacity 90 degrees: flat 380 x 260 mm
            capacity 90 degrees: square 260 x 260 mm
            turning speed range: 40 / 80 m/min
            dimensions of saw-band 3440 x 27 x 0,9 mm
            engine output 1,5 / 1,8 kW
            weight 670 kg
            Description :
            Electro-hydraulic, semi-automatic band saw with additional manual and
            semi-automatic-dynamic function, for cuts from 45° right to 60° left.
            Some features:
            Pivoting control panel on vertical post.
            420 mm large rotary table on roller bearings with preloaded thrust bearing
            and replaceable steel inserts.
            Double belt speed (40/80 m/min.)


        • WMT GmbH & Co.KG
        • Siemensstraße 1
        • 46342 Velen-Ramsdorf
        • Deutschland

        • Datasheet
          Request / Contact
          used Saws Bandsaw - Horizontal OPTIMUM S 275 NV


          • Kirchgeorg Werkzeugmaschinen
          • Frankfurter Straße 141
          • 63303 Dreieich-Sprendlingen
          • Deutschland

          • 0049-(0)-6103-9909-0
            0049-(0)-6103-9909-50
          • info@kirchgeorg.de
            www.kirchgeorg.de
          #1072-S275NV · Bandsaw - Horizontal

          OPTIMUM - S 275 NV - - NEU -

          Technical details
          cutting diameter 225 mm︱saw band length 2480 mm︱cutting width 160 mm︱dimensions of saw-band 2480 x 27 x 0,9 mm︱mitter cutting 60 °︱cutting speed 20 - 90 m/min︱power capacity 1,5 kW︱voltage 230 V︱coolant ︱total power requirement 1,6 kW︱weight of the machine ca. 200 kg︱dimensions of the machine ca. 0,70 x 1,40 x 1,40 m︱
          - stepless speed - stepless feed - miter cut - Bi-metal saw band - Material stop - Machine base - Coolant device
            cutting diameter 225 mm
            saw band length 2480 mm
            cutting width 160 mm
            dimensions of saw-band 2480 x 27 x 0,9 mm
            mitter cutting 60 °
            cutting speed 20 - 90 m/min
            power capacity 1,5 kW
            voltage 230 V
            total power requirement 1,6 kW
            weight of the machine ca. 200 kg
            dimensions of the machine ca. 0,70 x 1,40 x 1,40 m
            Description :
            - stepless speed
            - stepless feed
            - miter cut
            - Bi-metal saw band
            - Material stop
            - Machine base
            - Coolant device


        • Kirchgeorg Werkzeugmaschinen
        • Frankfurter Straße 141
        • 63303 Dreieich-Sprendlingen
        • Deutschland

        • Datasheet
          Request / Contact
          used Saws Bandsaw - Horizontal BAUER S 350


          • RS Sperling
          • von-Braun-Str. 20
          • 46244 Bottrop
          • Deutschland

          • +49 (0) 2045 / 41 43 22-0
            +49 (0) 2045 / 41 43 22-9
          • info@rs-sperling.de
            www.rs-sperling.de
          #1100-052124 · Bandsaw - Horizontal

          BAUER - S 350 - - ca. 1980 -

          Technical details
          cutting diameter 350 mm︱saw band length 3900 mm︱cutting width 450 mm︱ 350 mm︱capacity 90 degrees: flat 450 x 280 mm︱ 350 x 350 mm︱band speed 20 / 35 / 50 / 70 m/min︱dimensions of saw-band 3900 x 27 x 0,9 mm︱total power requirement 1,1 kW︱weight of the machine ca. 0,46 t︱dimensions of the machine ca. 2050x850x1300 mm︱
            cutting diameter 350 mm
            saw band length 3900 mm
            cutting width 450 mm
            350 mm
            capacity 90 degrees: flat 450 x 280 mm
            350 x 350 mm
            band speed 20 / 35 / 50 / 70 m/min
            dimensions of saw-band 3900 x 27 x 0,9 mm
            total power requirement 1,1 kW
            weight of the machine ca. 0,46 t
            dimensions of the machine ca. 2050x850x1300 mm


        • RS Sperling
        • von-Braun-Str. 20
        • 46244 Bottrop
        • Deutschland

        • Datasheet
          Request / Contact
          used Saws Bandsaw - Horizontal Pilous ARG 330 Plus F


          • RS Sperling
          • von-Braun-Str. 20
          • 46244 Bottrop
          • Deutschland

          • +49 (0) 2045 / 41 43 22-0
            +49 (0) 2045 / 41 43 22-9
          • info@rs-sperling.de
            www.rs-sperling.de
          #1100-051247 · Bandsaw - Horizontal

          Pilous - ARG 330 Plus F - - 2023 -

          Technical details
          cutting diameter 330 mm︱saw band length 3870 x 34 x 1,1 mm︱cutting width 400 mm︱band speed 15 - 90 m/min︱ 400 x 200 mm︱cutting capacity - round 330 bei 90° mm︱ 250 x 140 mm︱cutting capacity - round 240 bei 45° mm︱work height max. 945 mm︱cutting capacity - square 320 bei 90° mm︱cutting capacity - square 200 bei 45° mm︱total power requirement 3,0 kW︱weight of the machine ca. 720 kg︱dimensions of the machine ca. 2650 x 2040 x 2050 mm︱
          Very robust machine framework composes of castings from grey cast iron andensures vibration absorption. In order to achieve maximum stiffness of the whole system and cutting accuracy, the band saw arm is attached to a sturdy turntable on both sides in massive housing fitted with pre-stressing tapered roller bearings. Modern concept of the band saw arm allows for large cutting ranges in both upright and angular cutting. Massive arm turning system with large loading surfaces ensures exceptional stability of the machine even when cutting heavy workpieces. Simple locking and adjusting of the desired cutting angle on the angle scale with stops fixed at 60° to the right and 45° to the left. Massive quick-clampingvice ensures easy and reliable material clamping. Large diameter running wheels and precise three-side hardmetal guiding ensure long service life of the band and cutting accuracy. Large diameter running wheels and precise three-side hardmetal guiding ensure long service life of the band and cutting accuracy. Overdesign of running wheel bearings, tensioning wheel system and all rotary parts ensures long service life of the machine. Noiseless and maintenance-free band drive is provided by an industrial electric motor with worm gearbox. The machine is connected to a complete cooling system with a high-performance pump and possibility of regulating the flow on both guiding heads independently. Coolant tank with a pump is placed in the base of the machine. All of electrical wiring and coolant distribution are concealed in hollow parts of the arm which means they are protected from damage. The new concept of the arm also brings a great simplification when changing the saw band or when cleaning the inside of the arm. You just need to open the hinged back cover of the arm and it will stay locked in the upper position. The machine checks correct tension or break of the saw band. If the saw band breaks the machine automatically switches off. Easy control by ergonomically placed controls (electrical and hydraulics) on the base of the machine. The machine is equipped with a hinged stop with a 500mm scale. Hinged system revents the workpiece from jamming during cutting
            cutting diameter 330 mm
            saw band length 3870 x 34 x 1,1 mm
            cutting width 400 mm
            band speed 15 - 90 m/min
            400 x 200 mm
            cutting capacity - round 330 bei 90° mm
            250 x 140 mm
            cutting capacity - round 240 bei 45° mm
            work height max. 945 mm
            cutting capacity - square 320 bei 90° mm
            cutting capacity - square 200 bei 45° mm
            total power requirement 3,0 kW
            weight of the machine ca. 720 kg
            dimensions of the machine ca. 2650 x 2040 x 2050 mm
            Description :
            Very robust machine framework composes of castings from grey cast iron
            andensures vibration absorption.
            In order to achieve maximum stiffness of the whole system and cutting accuracy,
            the band saw arm is attached to a sturdy turntable on both sides in massive
            housing fitted with pre-stressing tapered roller bearings.
            Modern concept of the band saw arm allows for large cutting ranges in both
            upright and angular cutting.
            Massive arm turning system with large loading surfaces ensures exceptional
            stability of the machine even when cutting heavy workpieces.
            Simple locking and adjusting of the desired cutting angle on the angle scale
            with stops fixed at 60° to the right and 45° to the left.
            Massive quick-clampingvice ensures easy and reliable material clamping.
            Large diameter running wheels and precise three-side hardmetal guiding ensure
            long service life of the band and cutting accuracy. Large diameter running
            wheels and precise three-side hardmetal guiding ensure long service life of the
            band and cutting accuracy.
            Overdesign of running wheel bearings, tensioning wheel system and all rotary
            parts ensures long service life of the machine.
            Noiseless and maintenance-free band drive is provided by an industrial electric
            motor with worm gearbox. The machine is connected to a complete cooling system
            with a high-performance pump and possibility of regulating the flow on both
            guiding heads independently. Coolant tank with a pump is placed in the base of
            the machine.
            All of electrical wiring and coolant distribution are concealed in hollow parts
            of the arm which means they are protected from damage.
            The new concept of the arm also brings a great simplification when changing the
            saw band or when cleaning the inside of the arm. You just need to open the
            hinged back cover of the arm and it will stay locked in the upper position.
            The machine checks correct tension or break of the saw band. If the saw band
            breaks the machine automatically switches off.
            Easy control by ergonomically placed controls (electrical and hydraulics) on
            the base of the machine.
            The machine is equipped with a hinged stop with a 500mm scale. Hinged system
            revents the workpiece from jamming during cutting


        • RS Sperling
        • von-Braun-Str. 20
        • 46244 Bottrop
        • Deutschland

        • Datasheet
          Request / Contact
          used Saws Bandsaw - Horizontal Pilous ARG 330 CF-NC


          • RS Sperling
          • von-Braun-Str. 20
          • 46244 Bottrop
          • Deutschland

          • +49 (0) 2045 / 41 43 22-0
            +49 (0) 2045 / 41 43 22-9
          • info@rs-sperling.de
            www.rs-sperling.de
          #1100-051248 · Bandsaw - Horizontal

          Pilous - ARG 330 CF-NC - - 2023 -

          Technical details
          cutting diameter 330 mm︱saw band length 3870 x 34 x 1,1 mm︱cutting width 360 mm︱band speed 15 - 90 m/min︱ 360 x 250 mm︱cutting capacity - round 330 bei 90° mm︱ 250 x 150 mm︱cutting capacity - round 250 bei 45° mm︱work height max. 850 mm︱cutting capacity - square 320 bei 90° mm︱cutting capacity - square 240 bei 45° mm︱coolant tank 40 l︱Control ︱total power requirement 5,67 kW︱weight of the machine ca. 1450 kg︱dimensions of the machine ca. 1930 x 2070 x 200 mm︱
          Fully automated CNC band saw is generally suitable for cutting big series in the heaviest and non-stop operating plants, and also for cutting heavy workpieces of larger cross-sections. Compared to ARG 250 and 300 CF-NC using blade 27 x 0.9 mm, this model is fitted with the saw band 34 x 1.1 mm, which greatly increases the productivity of the machine and the accuracy of the cut, especially when cutting larger cross-sections of solid materials.
            cutting diameter 330 mm
            saw band length 3870 x 34 x 1,1 mm
            cutting width 360 mm
            band speed 15 - 90 m/min
            360 x 250 mm
            cutting capacity - round 330 bei 90° mm
            250 x 150 mm
            cutting capacity - round 250 bei 45° mm
            work height max. 850 mm
            cutting capacity - square 320 bei 90° mm
            cutting capacity - square 240 bei 45° mm
            coolant tank 40 l
            total power requirement 5,67 kW
            weight of the machine ca. 1450 kg
            dimensions of the machine ca. 1930 x 2070 x 200 mm
            Description :
            Fully automated CNC band saw is generally suitable for cutting big series in
            the heaviest and non-stop operating plants, and also for cutting heavy
            workpieces of larger cross-sections. Compared to ARG 250 and 300 CF-NC using
            blade 27 x 0.9 mm, this model is fitted with the saw band 34 x 1.1 mm, which
            greatly increases the productivity of the machine and the accuracy of the cut,
            especially when cutting larger cross-sections of solid materials.


        • RS Sperling
        • von-Braun-Str. 20
        • 46244 Bottrop
        • Deutschland

        • Datasheet
          Request / Contact
          used Saws Bandsaw - Horizontal HUVEMA HU 210 SB-2


          • RS Sperling
          • von-Braun-Str. 20
          • 46244 Bottrop
          • Deutschland

          • +49 (0) 2045 / 41 43 22-0
            +49 (0) 2045 / 41 43 22-9
          • info@rs-sperling.de
            www.rs-sperling.de
          #1100-051550 · Bandsaw - Horizontal

          HUVEMA - HU 210 SB-2 - - 2023 -

          Technical details
          cutting diameter 170 mm︱saw band length 2035 x 20 x 0,9 mm︱cutting width 130 mm︱cutting speed 30 80 m/min︱ 130 mm︱ 130 x 130 mm︱capacity 60 degrees: round 75 mm︱capacity 60 degrees: square 75 x 75 mm︱ 170 mm︱ 166 x 166 mm︱weight of the machine ca. 184 kg︱
          Compact band saw with variable speed. Including stand and cooling system. No slack due to special construction and rigid saw arm. Adjustable blade tension. Features: ?supplied with bi-metal saw blade material stop
            cutting diameter 170 mm
            saw band length 2035 x 20 x 0,9 mm
            cutting width 130 mm
            cutting speed 30 80 m/min
            130 mm
            130 x 130 mm
            capacity 60 degrees: round 75 mm
            capacity 60 degrees: square 75 x 75 mm
            170 mm
            166 x 166 mm
            weight of the machine ca. 184 kg
            Description :
            Compact band saw with variable speed. Including stand and cooling system. No
            slack due to special construction and rigid saw arm. Adjustable blade tension.

            Features:
            ?supplied with bi-metal saw blade
            material stop



        • RS Sperling
        • von-Braun-Str. 20
        • 46244 Bottrop
        • Deutschland

        • Datasheet
          Request / Contact
          used Saws Bandsaw - Horizontal HUVEMA HU 210 AC-4


          • RS Sperling
          • von-Braun-Str. 20
          • 46244 Bottrop
          • Deutschland

          • +49 (0) 2045 / 41 43 22-0
            +49 (0) 2045 / 41 43 22-9
          • info@rs-sperling.de
            www.rs-sperling.de
          #1100-051551 · Bandsaw - Horizontal

          HUVEMA - HU 210 AC-4 - - 2023 -

          Technical details
          cutting diameter 170 mm︱saw band length 2085 x 20 x 0,9 mm︱cutting width 180 mm︱cutting speed 35 - 70 m/min︱ 110 mm︱ 90 x 90 mm︱capacity 60 degrees: round 70 mm︱capacity 60 degrees: square 70 x 70 mm︱ 185 mm︱ 180 x 180 mm︱drive capacity - workpiece 0,75 kW︱range L-W-H 1000 x 600 x 1500 mm︱weight of the machine ca. 195 kg︱
          Sawing machine with base, European design. This machine is used for making small cuts. The saw blade tension can be adjusted manually. Quick-acting clamp. No vibrations due to heavy duty saw arm. The machine has a 2-speed motor, saw blade guide bearings. The sawing pressure can be adjusted through a hydraulic cylinder. Features: adjustable sawing pressure automatic stop with cooling system eccentric quick-acting clamp separate metal control panel 2-speed motor precision adjustment of the runners with material stop switch controlled saw blade cover gear wheel driven
            cutting diameter 170 mm
            saw band length 2085 x 20 x 0,9 mm
            cutting width 180 mm
            cutting speed 35 - 70 m/min
            110 mm
            90 x 90 mm
            capacity 60 degrees: round 70 mm
            capacity 60 degrees: square 70 x 70 mm
            185 mm
            180 x 180 mm
            drive capacity - workpiece 0,75 kW
            range L-W-H 1000 x 600 x 1500 mm
            weight of the machine ca. 195 kg
            Description :
            Sawing machine with base, European design. This machine is used for making
            small cuts. The saw blade tension can be adjusted manually. Quick-acting clamp.
            No vibrations due to heavy duty saw arm. The machine has a 2-speed motor, saw
            blade guide bearings. The sawing pressure can be adjusted through a hydraulic
            cylinder.

            Features:


            adjustable sawing pressure
            automatic stop
            with cooling system
            eccentric quick-acting clamp
            separate metal control panel
            2-speed motor
            precision adjustment of the runners
            with material stop
            switch controlled saw blade cover
            gear wheel driven




        • RS Sperling
        • von-Braun-Str. 20
        • 46244 Bottrop
        • Deutschland

        • Datasheet
          Request / Contact
          used Saws Bandsaw - Horizontal Beka-Mak BMS 270 DG


          • RS Sperling
          • von-Braun-Str. 20
          • 46244 Bottrop
          • Deutschland

          • +49 (0) 2045 / 41 43 22-0
            +49 (0) 2045 / 41 43 22-9
          • info@rs-sperling.de
            www.rs-sperling.de
          #1100-051408 · Bandsaw - Horizontal

          Beka-Mak - BMS 270 DG - - 2023 -

          Technical details
          cutting diameter 270 mm︱saw band length 3160 x 27 x 0,9 mm︱cutting width 350 mm︱work height max. 910 mm︱speed 35 - 70 m/min︱ 270 mm︱Capacity 90° rectangular 350 x 220 mm︱ 210 mm︱Capacity 45° rectangular 270 x 210 mm︱ 180 mm︱capacity 60 degrees: round 150 R mm︱capacity 60 degrees: square 100 R mm︱total power requirement 1,5 kW︱weight of the machine ca. 465 kg︱dimensions of the machine ca. 1750 x 770 x 1460 mm︱
          The HU 230 DG is a popular sawing machine and is heavily sold, due to its favourable price-quality relation. With adjustable sawing pressure, coolant pump with reservoir and electrical-mechanical saw blade tension adjustment, this machine is ideal for large workshops and small production lines. separate control panel sawing pressure hydraulically adjustable with cooling system easily moveable with stop gear wheel driven left – right mitre sawing
            cutting diameter 270 mm
            saw band length 3160 x 27 x 0,9 mm
            cutting width 350 mm
            work height max. 910 mm
            speed 35 - 70 m/min
            270 mm
            Capacity 90° rectangular 350 x 220 mm
            210 mm
            Capacity 45° rectangular 270 x 210 mm
            180 mm
            capacity 60 degrees: round 150 R mm
            capacity 60 degrees: square 100 R mm
            total power requirement 1,5 kW
            weight of the machine ca. 465 kg
            dimensions of the machine ca. 1750 x 770 x 1460 mm
            Description :
            The HU 230 DG is a popular sawing machine and is heavily sold, due to its
            favourable price-quality relation. With adjustable sawing pressure, coolant
            pump with reservoir and electrical-mechanical saw blade tension adjustment,
            this machine is ideal for large workshops and small production lines.

            separate control panel
            sawing pressure hydraulically adjustable
            with cooling system
            easily moveable
            with stop
            gear wheel driven
            left – right mitre sawing



        • RS Sperling
        • von-Braun-Str. 20
        • 46244 Bottrop
        • Deutschland

        • Datasheet
          Request / Contact
          used Saws Bandsaw - Horizontal GERD WOLFF KSY 650 X 1050


          • ATMH Werkzeugmaschinenhandel GmbH
          • Scharpenbergerstr.96-98
          • 58256 Ennepetal
          • Deutschland

          • +49 (0) 2333 / 403 43 70
            +49 (0) 2333 / 403 43 75
          • info@atmh.de
            www.atmh.de
          #2065-M1731 · Bandsaw - Horizontal

          GERD WOLFF - KSY 650 X 1050 - - 2023 - halbautomatisch

          Technical details
          cutting diameter 650 mm︱saw band length 7730 x 54 mm︱cutting width 1,3 mm︱Control halbautomatisch ︱Cutting area - square 650 x 650 ︱Cutting area - flat 650 x 750 ︱total power requirement 5,5 kW / 750 Nm ︱weight of the machine ca. 4550 kg︱dimensions of the machine ca. 2100 x 1550 x 3900 mm︱
          The KSY 650 x 1050 is a semi-automatic and column-guided horizontal bandsaw. In addition, the machine has a driven roller table which is 2 meters long on both the front and rear sides. Optional Specifications - Motorized System For Roller Table - Laser Line - Extra Double Roller Table - PLC-Screen - Anti-Vibration System The pictures are for orientation only and do not represent a true-to-scale image of the machine.
            cutting diameter 650 mm
            saw band length 7730 x 54 mm
            cutting width 1,3 mm
            Control halbautomatisch
            Cutting area - square 650 x 650
            Cutting area - flat 650 x 750
            total power requirement 5,5 kW / 750 Nm
            weight of the machine ca. 4550 kg
            dimensions of the machine ca. 2100 x 1550 x 3900 mm
            Description :
            The KSY 650 x 1050 is a semi-automatic and column-guided horizontal bandsaw.

            In addition, the machine has a driven roller table which is 2 meters long on

            both the front and rear sides.



            Optional Specifications

            - Motorized System For Roller Table
            - Laser Line
            - Extra Double Roller Table
            - PLC-Screen
            - Anti-Vibration System
            The pictures are for orientation only and do not represent a true-to-scale
            image of the machine.



        • ATMH Werkzeugmaschinenhandel GmbH
        • Scharpenbergerstr.96-98
        • 58256 Ennepetal
        • Deutschland

        • Datasheet
          Request / Contact
          used Saws Bandsaw - Horizontal Pilous ARG 260 PLUS


          • RS Sperling
          • von-Braun-Str. 20
          • 46244 Bottrop
          • Deutschland

          • +49 (0) 2045 / 41 43 22-0
            +49 (0) 2045 / 41 43 22-9
          • info@rs-sperling.de
            www.rs-sperling.de
          #1100-051243 · Bandsaw - Horizontal

          Pilous - ARG 260 PLUS - - 2023 -

          Technical details
          cutting diameter 260 mm︱saw band length 2880 x 27 x 0,9 mm︱cutting width 300 mm︱band speed 35/70 m/min︱ 300 x 200 mm︱cutting capacity - round 260 bei 90° mm︱ 190 x 100 mm︱cutting capacity - round 175 bei 45° mm︱work height max. 910 mm︱total power requirement 1/1,4 kW︱weight of the machine ca. 475 kg︱dimensions of the machine ca. 1860 x 1680 x 1980 mm︱
            cutting diameter 260 mm
            saw band length 2880 x 27 x 0,9 mm
            cutting width 300 mm
            band speed 35/70 m/min
            300 x 200 mm
            cutting capacity - round 260 bei 90° mm
            190 x 100 mm
            cutting capacity - round 175 bei 45° mm
            work height max. 910 mm
            total power requirement 1/1,4 kW
            weight of the machine ca. 475 kg
            dimensions of the machine ca. 1860 x 1680 x 1980 mm


        • RS Sperling
        • von-Braun-Str. 20
        • 46244 Bottrop
        • Deutschland

        • Datasheet
          Request / Contact
          used Saws Bandsaw - Horizontal Beka-Mak BMS 230 DG


          • RS Sperling
          • von-Braun-Str. 20
          • 46244 Bottrop
          • Deutschland

          • +49 (0) 2045 / 41 43 22-0
            +49 (0) 2045 / 41 43 22-9
          • info@rs-sperling.de
            www.rs-sperling.de
          #1100-051405 · Bandsaw - Horizontal

          Beka-Mak - BMS 230 DG - - 2023 -

          Technical details
          speed 35 - 70 m/min︱cutting diameter 230 mm︱saw band length 2720 x 27 x 0,9 mm︱cutting width 130 mm︱cutting capacity - flat 90° / 320 x 130 mm︱cutting capacity - round 90° / 230 mm︱cutting capacity - square 90° / 230 x 230 mm︱cutting capacity - flat 45° / R 220x60 /L 230x140 mm︱cutting capacity - round 45° / R 180 / L 220 mm︱cutting capacity - square 45° / R 150 / L 190 mm︱cutting capacity - flat 60° / 120 x 105 mm︱cutting capacity - round 60° /120 mm︱cutting capacity - square 60° / 105 mm︱total power requirement 1,0 - 1,5 kW︱weight of the machine ca. 390 kg︱dimensions of the machine ca. 1,35 x 0,9 x 1,3 m︱
          The HU 230 DG is a popular sawing machine and is heavily sold, due to its favourable price-quality relation. With adjustable sawing pressure, coolant pump with reservoir and electrical-mechanical saw blade tension adjustment, this machine is ideal for large workshops and small production lines. separate control panel sawing pressure hydraulically adjustable with cooling system easily moveable with stop gear wheel driven left – right mitre sawing
            speed 35 - 70 m/min
            cutting diameter 230 mm
            saw band length 2720 x 27 x 0,9 mm
            cutting width 130 mm
            cutting capacity - flat 90° / 320 x 130 mm
            cutting capacity - round 90° / 230 mm
            cutting capacity - square 90° / 230 x 230 mm
            cutting capacity - flat 45° / R 220x60 /L 230x140 mm
            cutting capacity - round 45° / R 180 / L 220 mm
            cutting capacity - square 45° / R 150 / L 190 mm
            cutting capacity - flat 60° / 120 x 105 mm
            cutting capacity - round 60° /120 mm
            cutting capacity - square 60° / 105 mm
            total power requirement 1,0 - 1,5 kW
            weight of the machine ca. 390 kg
            dimensions of the machine ca. 1,35 x 0,9 x 1,3 m
            Description :
            The HU 230 DG is a popular sawing machine and is heavily sold, due to its
            favourable price-quality relation. With adjustable sawing pressure, coolant
            pump with reservoir and electrical-mechanical saw blade tension adjustment,
            this machine is ideal for large workshops and small production lines.

            separate control panel
            sawing pressure hydraulically adjustable
            with cooling system
            easily moveable
            with stop
            gear wheel driven
            left – right mitre sawing



        • RS Sperling
        • von-Braun-Str. 20
        • 46244 Bottrop
        • Deutschland

        • Datasheet
          Request / Contact
          used Saws Bandsaw - Horizontal RITKE 180.150 G


          • RS Sperling
          • von-Braun-Str. 20
          • 46244 Bottrop
          • Deutschland

          • +49 (0) 2045 / 41 43 22-0
            +49 (0) 2045 / 41 43 22-9
          • info@rs-sperling.de
            www.rs-sperling.de
          #1100-051219 · Bandsaw - Horizontal

          RITKE - 180.150 G - - 2023 -

          Technical details
          cutting diameter 150 mm︱saw band length 1735 x 13 x 0,9 mm︱cutting width 180 mm︱capacity 60 degrees: round 70 mm︱cutting range 125 mm︱capacity 45 degrees: flat 150 x 125 mm︱capacity 90 degrees: flat 150 x 180 mm︱Working height 870 mm︱total power requirement 0,37 kW︱weight of the machine ca. 62 kg︱dimensions of the machine ca. 1640 x 400 x 950 mm︱
            cutting diameter 150 mm
            saw band length 1735 x 13 x 0,9 mm
            cutting width 180 mm
            capacity 60 degrees: round 70 mm
            cutting range 125 mm
            capacity 45 degrees: flat 150 x 125 mm
            capacity 90 degrees: flat 150 x 180 mm
            Working height 870 mm
            total power requirement 0,37 kW
            weight of the machine ca. 62 kg
            dimensions of the machine ca. 1640 x 400 x 950 mm


        • RS Sperling
        • von-Braun-Str. 20
        • 46244 Bottrop
        • Deutschland

        • Datasheet
          Request / Contact
          used Saws Bandsaw - Horizontal Pilous ARG 200 Plus


          • RS Sperling
          • von-Braun-Str. 20
          • 46244 Bottrop
          • Deutschland

          • +49 (0) 2045 / 41 43 22-0
            +49 (0) 2045 / 41 43 22-9
          • info@rs-sperling.de
            www.rs-sperling.de
          #1100-051253 · Bandsaw - Horizontal

          Pilous - ARG 200 Plus - - 2023 -

          Technical details
          cutting diameter 200 mm︱saw band length 2490 x 20 x 0,9 mm︱cutting width 240 mm︱band speed 40 / 80 m/min︱ 240 x 120 mm︱cutting capacity - round 200 bei 90° mm︱cutting capacity - square 200 bei 90° mm︱ 155 x 70 mm︱cutting capacity - round 155 bei 45° mm︱cutting capacity - square 130 bei 45° mm︱cutting capacity - round 95 / 30° mm︱coolant tank 15 l︱work height max. 900 mm︱total power requirement 0,75/0,95 kW︱weight of the machine ca. 250 kg︱dimensions of the machine ca. 1,43 x 0,75 x 1,4 m︱
          The ARG 200 plus is a robust manual metal band saw with high cutting accuracy for small to medium-sized workpieces! Due to its compact design, this machine is ideal for use in workshops or maintenance. The basic equipment of the machine enables processing of a large number of different materials. With this machine, miter cuts from -45° to +30° are continuously possible (swivel range left 45° and right 60°). The material is tensioned and the saw frame is lifted manually. The saw cut is made by a hydraulic cylinder using its own weight and can be controlled from the control panel. At the end of the cut, the machine switches off automatically. Lifting the saw frame is made easier by adjustable springs!
            cutting diameter 200 mm
            saw band length 2490 x 20 x 0,9 mm
            cutting width 240 mm
            band speed 40 / 80 m/min
            240 x 120 mm
            cutting capacity - round 200 bei 90° mm
            cutting capacity - square 200 bei 90° mm
            155 x 70 mm
            cutting capacity - round 155 bei 45° mm
            cutting capacity - square 130 bei 45° mm
            cutting capacity - round 95 / 30° mm
            coolant tank 15 l
            work height max. 900 mm
            total power requirement 0,75/0,95 kW
            weight of the machine ca. 250 kg
            dimensions of the machine ca. 1,43 x 0,75 x 1,4 m
            Description :
            The ARG 200 plus is a robust manual metal band saw with high cutting accuracy
            for small to medium-sized workpieces! Due to its compact design, this machine
            is ideal for use in workshops or maintenance. The basic equipment of the
            machine enables processing of a large number of different materials. With this
            machine, miter cuts from -45° to +30° are continuously possible (swivel range
            left 45° and right 60°).
            The material is tensioned and the saw frame is lifted manually. The saw cut is
            made by a hydraulic cylinder using its own weight and can be controlled from
            the control panel.
            At the end of the cut, the machine switches off automatically. Lifting the saw
            frame is made easier by adjustable springs!


        • RS Sperling
        • von-Braun-Str. 20
        • 46244 Bottrop
        • Deutschland

        • Datasheet
          Request / Contact
          used Saws Bandsaw - Horizontal Beka-Mak BMS 320


          • RS Sperling
          • von-Braun-Str. 20
          • 46244 Bottrop
          • Deutschland

          • +49 (0) 2045 / 41 43 22-0
            +49 (0) 2045 / 41 43 22-9
          • info@rs-sperling.de
            www.rs-sperling.de
          #1100-051416 · Bandsaw - Horizontal

          Beka-Mak - BMS 320 - - 2023 -

          Technical details
          cutting diameter 320 mm︱saw band length 3660 x 27 x 0,9 mm︱cutting width 420 mm︱ 320 x 320 mm︱Capacity 90° rectangular 420 x 200 mm︱ 280 mm︱ 260 x 260 mm︱Capacity 45° rectangular 280 x 200 mm︱cutting speed 20 - 100 m/min︱work height max. 640 mm︱total power requirement kW︱weight of the machine ca. 1,62 t︱dimensions of the machine ca. 1,8 x 0,82 x 1,19 m︱
          This bandsaw have been designed to give a low cost compact and rugged machines.Constructed in heavy gauge steel, it offers a strong rigid sawframe, providing a high degree of accurancy when cutting. The machines are fitted with a removable coolant tank incorporating a submerged electric coolant pump which supplies coolant to both guide assemblies. These models can cope with most types of material.Blade guides with rollers and carbide pads provide precise support for the blade. Thermal overload and no-volt release are standart feature and the machines automatically switch off at the end of the cut. Bi-Metal sawblade and matarial support stand are supplied as standart. Standard Features: Securty Switch Control Panel Inverter Blade Brash Saw Blade 27 Gearbox Roller Table Coolant Pump Hydrodynamic Blade Tension Material Limit Optional Features: ILC Micro spray Device 3 Mt Material Roller Table Chip Conveyor
            cutting diameter 320 mm
            saw band length 3660 x 27 x 0,9 mm
            cutting width 420 mm
            320 x 320 mm
            Capacity 90° rectangular 420 x 200 mm
            280 mm
            260 x 260 mm
            Capacity 45° rectangular 280 x 200 mm
            cutting speed 20 - 100 m/min
            work height max. 640 mm
            weight of the machine ca. 1,62 t
            dimensions of the machine ca. 1,8 x 0,82 x 1,19 m
            Description :
            This bandsaw have been designed to give a low cost compact and rugged
            machines.Constructed in heavy gauge steel, it offers a strong rigid sawframe,
            providing a high degree of accurancy when cutting. The machines are fitted with
            a removable coolant tank incorporating a submerged electric coolant pump which
            supplies coolant to both guide assemblies. These models can cope with most
            types of material.Blade guides with rollers and carbide pads provide precise
            support for the blade. Thermal overload and no-volt release are standart
            feature and the machines automatically switch off at the end of the cut.
            Bi-Metal sawblade and matarial support stand are supplied as standart.


            Standard Features:

            Securty Switch
            Control Panel
            Inverter
            Blade Brash
            Saw Blade 27
            Gearbox
            Roller Table
            Coolant Pump
            Hydrodynamic Blade Tension
            Material Limit

            Optional Features:

            ILC Micro spray Device
            3 Mt Material Roller Table
            Chip Conveyor




        • RS Sperling
        • von-Braun-Str. 20
        • 46244 Bottrop
        • Deutschland

        • Datasheet
          Request / Contact
          used Saws Bandsaw - Horizontal GERD WOLFF KMS 280


          • ATMH Werkzeugmaschinenhandel GmbH
          • Scharpenbergerstr.96-98
          • 58256 Ennepetal
          • Deutschland

          • +49 (0) 2333 / 403 43 70
            +49 (0) 2333 / 403 43 75
          • info@atmh.de
            www.atmh.de
          #2065-S3817 · Bandsaw - Horizontal

          GERD WOLFF - KMS 280 - - 2023 -

          Technical details
          cutting diameter 280 mm︱saw band length 3660 x 27 mm︱cutting width 0,9 mm︱capacity 90 degrees: square 270 x 270 mm︱capacity 90 degrees: flat 210 x 330 mm︱total power requirement 1,5 kW︱weight of the machine ca. 1200 kg︱dimensions of the machine ca. 1350 x 2250 x 1860 mm︱
          The GERD WOLFF KMS 280 is a precision servo-driven bandsaw designed for consistently accurate cutting.
            cutting diameter 280 mm
            saw band length 3660 x 27 mm
            cutting width 0,9 mm
            capacity 90 degrees: square 270 x 270 mm
            capacity 90 degrees: flat 210 x 330 mm
            total power requirement 1,5 kW
            weight of the machine ca. 1200 kg
            dimensions of the machine ca. 1350 x 2250 x 1860 mm
            Description :
            The GERD WOLFF KMS 280 is a precision servo-driven bandsaw designed for
            consistently accurate cutting.


        • ATMH Werkzeugmaschinenhandel GmbH
        • Scharpenbergerstr.96-98
        • 58256 Ennepetal
        • Deutschland

        • Datasheet
          Request / Contact
          used Saws Bandsaw - Horizontal GERD WOLFF KSY 1600 x 2500


          • ATMH Werkzeugmaschinenhandel GmbH
          • Scharpenbergerstr.96-98
          • 58256 Ennepetal
          • Deutschland

          • +49 (0) 2333 / 403 43 70
            +49 (0) 2333 / 403 43 75
          • info@atmh.de
            www.atmh.de
          #2065-246 · Bandsaw - Horizontal

          GERD WOLFF - KSY 1600 x 2500 - - 2023 -

          Technical details
          cutting diameter 1600 mm︱saw band length 11000 mm︱cutting width 1,6 mm︱capacity 90 degrees: square 1600 X 1600 mm︱capacity 90 degrees: flat 1600 X 2500 mm︱total power requirement 11 kW︱weight of the machine ca. 19 t︱
          The pictures are only for orientation and illustration of the KSY model in a different size.
            cutting diameter 1600 mm
            saw band length 11000 mm
            cutting width 1,6 mm
            capacity 90 degrees: square 1600 X 1600 mm
            capacity 90 degrees: flat 1600 X 2500 mm
            total power requirement 11 kW
            weight of the machine ca. 19 t
            Description :
            The pictures are only for orientation and illustration of the KSY model in a
            different size.


        • ATMH Werkzeugmaschinenhandel GmbH
        • Scharpenbergerstr.96-98
        • 58256 Ennepetal
        • Deutschland

        • Datasheet
          Request / Contact
          used Saws Bandsaw - Horizontal GERD WOLFF KMO 280


          • ATMH Werkzeugmaschinenhandel GmbH
          • Scharpenbergerstr.96-98
          • 58256 Ennepetal
          • Deutschland

          • +49 (0) 2333 / 403 43 70
            +49 (0) 2333 / 403 43 75
          • info@atmh.de
            www.atmh.de
          #2065-16118 · Bandsaw - Horizontal

          GERD WOLFF - KMO 280 - - 2023 -

          Technical details
          cutting diameter 280 mm︱saw band length 3660 mm︱cutting width 0,9 mm︱capacity 90 degrees: square 260 x 260 mm︱capacity 90 degrees: flat 210 x 340 mm︱feed length 500/2000 mm︱total power requirement 3 kW︱weight of the machine ca. 0,65 t︱dimensions of the machine ca. 1300 x 1270 x 1900 m︱
          Fully automatic horizontal band saw
            cutting diameter 280 mm
            saw band length 3660 mm
            cutting width 0,9 mm
            capacity 90 degrees: square 260 x 260 mm
            capacity 90 degrees: flat 210 x 340 mm
            feed length 500/2000 mm
            total power requirement 3 kW
            weight of the machine ca. 0,65 t
            dimensions of the machine ca. 1300 x 1270 x 1900 m
            Description :
            Fully automatic horizontal band saw


        • ATMH Werkzeugmaschinenhandel GmbH
        • Scharpenbergerstr.96-98
        • 58256 Ennepetal
        • Deutschland

        • Datasheet
          Request / Contact
          used Saws Bandsaw - Horizontal GERD WOLFF KSY 1600 X 1600


          • ATMH Werkzeugmaschinenhandel GmbH
          • Scharpenbergerstr.96-98
          • 58256 Ennepetal
          • Deutschland

          • +49 (0) 2333 / 403 43 70
            +49 (0) 2333 / 403 43 75
          • info@atmh.de
            www.atmh.de
          #2065-TT2023 · Bandsaw - Horizontal

          GERD WOLFF - KSY 1600 X 1600 - - 2023 -

          Technical details
          cutting diameter 1600 mm︱saw band length 14000 mm︱cutting width 1600 mm︱hydraulic motor 3 kW︱total power requirement 11 kW / 7525 Nm ︱weight of the machine ca. 20 t︱required space 4020 X 2220 X 7600 mm︱
          Individually designed and manufactured horizontal bandsaw. Technical details (attached in technical data sheet).
            cutting diameter 1600 mm
            saw band length 14000 mm
            cutting width 1600 mm
            hydraulic motor 3 kW
            total power requirement 11 kW / 7525 Nm
            weight of the machine ca. 20 t
            required space 4020 X 2220 X 7600 mm
            Description :
            Individually designed and manufactured horizontal bandsaw.
            Technical details (attached in technical data sheet).


        • ATMH Werkzeugmaschinenhandel GmbH
        • Scharpenbergerstr.96-98
        • 58256 Ennepetal
        • Deutschland

        • Datasheet
          Request / Contact
          used Saws Bandsaw - Horizontal BEKA-MAK BMSY 540 CGH


          • Volz Werkzeugmaschinen
          • Friedrich-Ebert Straße 78-80
          • 58454 Witten-Annen
          • Deutschland

          • +49 (0) 23 02 / 98 72 – 0
            +49 (0) 23 02 / 98 72 - 50
          • anfrage@volz-witten.de
            www.volz-witten.de
          #1134-060004 · Bandsaw - Horizontal

          BEKA-MAK - BMSY 540 CGH - - 2023 -

          Technical details
          540 mm︱ 6000 mm︱ 750 mm︱ 540 mm︱ 450x540 mm︱dimensions of saw-band 6000x41x1,3 mm︱
            540 mm
            6000 mm
            750 mm
            540 mm
            450x540 mm
            dimensions of saw-band 6000x41x1,3 mm


        • Volz Werkzeugmaschinen
        • Friedrich-Ebert Straße 78-80
        • 58454 Witten-Annen
        • Deutschland

        • Datasheet
          Request / Contact
          used Saws Bandsaw - Horizontal GERD WOLFF KSY 1100 x 1300


          • ATMH Werkzeugmaschinenhandel GmbH
          • Scharpenbergerstr.96-98
          • 58256 Ennepetal
          • Deutschland

          • +49 (0) 2333 / 403 43 70
            +49 (0) 2333 / 403 43 75
          • info@atmh.de
            www.atmh.de
          #2065-16117 · Bandsaw - Horizontal

          GERD WOLFF - KSY 1100 x 1300 - - 2023 -

          Technical details
          cutting diameter 1100 mm︱saw band length 11000 x 67 mm︱cutting width 1,6 mm︱capacity 90 degrees: square 1100 x 1100 mm︱capacity 90 degrees: flat 1100 x 1300 mm︱total power requirement 7,5 kW / 3100 Nm ︱weight of the machine ca. 8700 kg︱dimensions of the machine ca. 2800 x 1700 x 5200 mm︱
          The KSY 550 x 700 is a semi-automatic and column-guided horizontal bandsaw. The chips are transported away via a spiral conveyor. A chip trolley approx. 60 x 50 x 40 is included in the scope of delivery. The roller tables can be moved forwards and backwards via the control panel. There is a 1.40 x 1.00 metre roller table on the outfeed side. There is a motorised roller table 2 x 1.40 m on the infeed side. Optional Specifications - Motorized System For Roller Table - Laser Line - Extra Double Roller Table - PLC-Screen - Anti-Vibration System The pictures are for orientation only and do not represent a true-to-scale image of the machine.
            cutting diameter 1100 mm
            saw band length 11000 x 67 mm
            cutting width 1,6 mm
            capacity 90 degrees: square 1100 x 1100 mm
            capacity 90 degrees: flat 1100 x 1300 mm
            total power requirement 7,5 kW / 3100 Nm
            weight of the machine ca. 8700 kg
            dimensions of the machine ca. 2800 x 1700 x 5200 mm
            Description :
            The KSY 550 x 700 is a semi-automatic and column-guided horizontal bandsaw.
            The chips are transported away via a spiral conveyor.
            A chip trolley approx. 60 x 50 x 40 is included in the scope of delivery.

            The roller tables can be moved forwards and backwards via the control panel.
            There is a 1.40 x 1.00 metre roller table on the outfeed side.
            There is a motorised roller table 2 x 1.40 m on the infeed side.


            Optional Specifications

            - Motorized System For Roller Table
            - Laser Line
            - Extra Double Roller Table
            - PLC-Screen
            - Anti-Vibration System

            The pictures are for orientation only and do not represent a true-to-scale
            image of the machine.


        • ATMH Werkzeugmaschinenhandel GmbH
        • Scharpenbergerstr.96-98
        • 58256 Ennepetal
        • Deutschland

        • Datasheet
          Request / Contact
          used Saws Bandsaw - Horizontal Beka-Mak BMSY 230 DG


          • RS Sperling
          • von-Braun-Str. 20
          • 46244 Bottrop
          • Deutschland

          • +49 (0) 2045 / 41 43 22-0
            +49 (0) 2045 / 41 43 22-9
          • info@rs-sperling.de
            www.rs-sperling.de
          #1100-051440 · Bandsaw - Horizontal

          Beka-Mak - BMSY 230 DG - - 2023 -

          Technical details
          cutting diameter 230 mm︱saw band length 2730 x 27 x 0,9 mm︱cutting width 130 mm︱speed 35 - 70 m/min︱Capacity 90° rectangular 320 x 130 mm︱ 230 mm︱ 180 mm︱Capacity 45° rectangular 230 x 100 mm︱ 150 x 150 mm︱capacity 60 degrees: round 120 mm︱capacity 60 degrees: flat 120 x 100 mm︱capacity 60 degrees: square 100 x 100 mm︱table height 760 mm︱total power requirement 1,8 kW︱weight of the machine ca. 430 kg︱dimensions of the machine ca. 1,35 x 0,7 x 1,3 m︱
          On semi-automatic models the saw arm is lifted up automatically after the sawing cycle has finished. inverter hydraulic clamping hydraulic saw blade tension adjustment automatic stop ?material transport system
            cutting diameter 230 mm
            saw band length 2730 x 27 x 0,9 mm
            cutting width 130 mm
            speed 35 - 70 m/min
            Capacity 90° rectangular 320 x 130 mm
            230 mm
            180 mm
            Capacity 45° rectangular 230 x 100 mm
            150 x 150 mm
            capacity 60 degrees: round 120 mm
            capacity 60 degrees: flat 120 x 100 mm
            capacity 60 degrees: square 100 x 100 mm
            table height 760 mm
            total power requirement 1,8 kW
            weight of the machine ca. 430 kg
            dimensions of the machine ca. 1,35 x 0,7 x 1,3 m
            Description :
            On semi-automatic models the saw arm is lifted up automatically
            after the sawing cycle has finished.

            inverter
            hydraulic clamping
            hydraulic saw blade tension adjustment
            automatic stop
            ?material transport system



        • RS Sperling
        • von-Braun-Str. 20
        • 46244 Bottrop
        • Deutschland

        • Datasheet
          Request / Contact
          used Saws Bandsaw - Horizontal GERD WOLFF KMY 2DG 350


          • ATMH Werkzeugmaschinenhandel GmbH
          • Scharpenbergerstr.96-98
          • 58256 Ennepetal
          • Deutschland

          • +49 (0) 2333 / 403 43 70
            +49 (0) 2333 / 403 43 75
          • info@atmh.de
            www.atmh.de
          #2065-16102 · Bandsaw - Horizontal

          GERD WOLFF - KMY 2DG 350 - - 2023 -

          Technical details
          cutting diameter 350 mm︱saw band length 4860 x 34 mm︱cutting width 1,1 mm︱Capacity 90° - round 350 mm︱Capacity 90° - square 350 x 350 mm︱Capacity 90° - rectangle 350 x 500 mm︱Capacity 45° - round 320 mm︱Capacity 45° - square 300 x 300 mm︱Capacity 45° - rectangle 250 x 320 mm︱Capacity 30° - round 210 mm︱Capacity 30° - square 180 x 180 mm︱Capacity 30° - rectangle 160 x 200 mm︱total power requirement 3 kW / 500 Nm ︱weight of the machine ca. 1450 kg︱dimensions of the machine ca. 1600 x 1400 x 2850 mm︱
          The KMY 2DG 350 is a semi-automatic - double miter cutting bandsaw. Standard specifications - Hydraulic Vice - Hydro-Mechanic Blade Tension - Blake Breakage Switch / Stop System - 2 Pieces 60 cm Roller Table - Swarf Brush - Led Lighting The pictures are for orientation only and do not represent a true-to-scale image of the machine.
            cutting diameter 350 mm
            saw band length 4860 x 34 mm
            cutting width 1,1 mm
            Capacity 90° - round 350 mm
            Capacity 90° - square 350 x 350 mm
            Capacity 90° - rectangle 350 x 500 mm
            Capacity 45° - round 320 mm
            Capacity 45° - square 300 x 300 mm
            Capacity 45° - rectangle 250 x 320 mm
            Capacity 30° - round 210 mm
            Capacity 30° - square 180 x 180 mm
            Capacity 30° - rectangle 160 x 200 mm
            total power requirement 3 kW / 500 Nm
            weight of the machine ca. 1450 kg
            dimensions of the machine ca. 1600 x 1400 x 2850 mm
            Description :
            The KMY 2DG 350 is a semi-automatic - double miter cutting bandsaw.



            Standard specifications


            - Hydraulic Vice

            - Hydro-Mechanic Blade Tension

            - Blake Breakage Switch / Stop System

            - 2 Pieces 60 cm Roller Table

            - Swarf Brush

            - Led Lighting



            The pictures are for orientation only and do not represent a true-to-scale
            image of the machine.




        • ATMH Werkzeugmaschinenhandel GmbH
        • Scharpenbergerstr.96-98
        • 58256 Ennepetal
        • Deutschland

        • Datasheet
          Request / Contact
          •   
          •   
          • 1  
          • 2  
          • 3  
          • 4  
          • 5  
          • 6  
          •   
          •