European network of stockholding machinery dealers

Bitte einen Suchbegriff eingeben - Please enter a search term
Category:
    Manufacturer:
      Machines:
        Trader:

          Gear Honing Machine

          Machinelist: Gear Honing Machine


          Gear Honing Machine

          used Gear cutting machines Gear Honing Machine REISHAUER RZR


          • HANS - JÜRGEN GEIGER
          • James-Watt-Str. 12
          • 72555 Metzingen
          • Deutschland

          • (0049)-7123-18040
            (0049)-7123-18384
          • geiger@geiger-germany.com
            www.geiger-germany.com
          #1049-309529 · Gear Honing Machine

          REISHAUER - RZR - - 1996 -

          Technical details
          workpiece diameter 240 mm︱centre distance 0 mm︱honing length max. 500 mm︱max. module 5 ︱total power requirement 12 kW︱weight of the machine ca. 5000 kg︱dimensions of the machine ca. m︱
            workpiece diameter 240 mm
            honing length max. 500 mm
            max. module 5
            total power requirement 12 kW
            weight of the machine ca. 5000 kg
          Datasheet
          Request / Contact
          used Gear cutting machines Gear Honing Machine FÄSSLER D - 250 / H5


          • HANS - JÜRGEN GEIGER
          • James-Watt-Str. 12
          • 72555 Metzingen
          • Deutschland

          • (0049)-7123-18040
            (0049)-7123-18384
          • geiger@geiger-germany.com
            www.geiger-germany.com
          #1049-0337091 · Gear Honing Machine

          FÄSSLER - D - 250 / H5 - - 1983 -

          Technical details
          workpiece diameter 250 mm︱centre distance 0 mm︱honing length max. mm︱max. module 5
          Gear Ø, min./max. 10 / 250 mm Module range 1 - 5 Length of teeth / max. table stroke 500 mm Height of centres of tailstocks 220 mm Max. weight of workpiece 50 / 100 kg Honing head swivelling +/- 35 ° Speeds of honing tool 20 - 500 rpm Size of honing tool, Ø x width 300 x 40 mm Workpiece speeds 500 - 3,000 rpm Total adjustment of cross slide 270 mm Rapid traverse of cross slide 50 mm Infeed travel of cross slide, mechanical 1 - 8 mm/Ø Roughing / finishing infeed 1 - 29 / 0.2 - 2.8 mm/sec Table speeds, hydraulic 0 - 6 m/min Total electrical load 5.5 kW - 380 V - 50 Hz Weight 3,200 kg Accessories / Special Features * Working parameters can be preset using counters and control units. Automatic working process with workpiece counter. * All roughing and finishing infeeds can be adjusted by a decade switch; as well as by table reverse times and fast infeeds with preset times (1sec = Ø 0.04 mm), set on a potentiometer. Ampere display, etc. * Convex honing and conical honing are possible via templates. Asymmetric honing is also possible if the workpiece is prepared appropriately (i.e. pre-shaped). * Separate honing oil unit with magnetic separator and fine filter. * Mechanical tailstocks for manual loading. * Oil mist separator. * Sliding doors with foot switch. * Separate hydraulic unit. Condition : Good. Machine can be inspected under power. Delivery : Ex stock, as inspected. Payment : Net, after conclusion of contract. We have a large selection of gear machines available. Please let us know your requirements.
            workpiece diameter 250 mm
            max. module 5
            Description :
            Gear Ø, min./max. 10 / 250 mm
            Module range 1 - 5
            Length of teeth / max. table stroke 500 mm
            Height of centres of tailstocks 220 mm

            Max. weight of workpiece 50 / 100 kg
            Honing head swivelling +/- 35 °

            Speeds of honing tool 20 - 500 rpm
            Size of honing tool, Ø x width 300 x 40 mm

            Workpiece speeds 500 - 3,000 rpm
            Total adjustment of cross slide 270 mm
            Rapid traverse of cross slide 50 mm
            Infeed travel of cross slide, mechanical 1 - 8 mm/Ø
            Roughing / finishing infeed 1 - 29 / 0.2 - 2.8 mm/sec

            Table speeds, hydraulic 0 - 6 m/min

            Total electrical load 5.5 kW - 380 V - 50 Hz
            Weight 3,200 kg

            Accessories / Special Features
            * Working parameters can be preset using counters and control units. Automatic working process with workpiece counter.
            * All roughing and finishing infeeds can be adjusted by a decade switch; as well as by table reverse times and fast infeeds with preset times (1sec = Ø 0.04 mm), set on a potentiometer. Ampere display, etc.
            * Convex honing and conical honing are possible via templates. Asymmetric honing is also possible if the workpiece is prepared appropriately (i.e. pre-shaped).
            * Separate honing oil unit with magnetic separator and fine filter.
            * Mechanical tailstocks for manual loading. * Oil mist separator.
            * Sliding doors with foot switch. * Separate hydraulic unit.


            Condition : Good. Machine can be inspected under power.
            Delivery : Ex stock, as inspected.
            Payment : Net, after conclusion of contract.

            We have a large selection of gear machines available. Please let us know your requirements.
          Datasheet
          Request / Contact
          •   
          •   
          • 1  
          •   
          •   

            Trader Profile:   Hans - Jürgen Geiger
          Maschinen-Vertrieb GmbH

          Contact Trader



            Hans - Jürgen Geiger
          Maschinen-Vertrieb GmbH

           James-Watt-Str. 12
            72555 - Metzingen
            Deutschland
            (0049)-7123-18040">(0049)-7123-18040
            (0049)-7123-18384
            geiger@geiger-germany.com
            www.geiger-germany.com

          Profile of Trader

           MORE THAN 40 YEARS OF PRACTICE...
          Our company was founded by the current managing director, Hans-Jürgen Geiger, in 1968.
          We have expanded over the years and now have a warehouse area of more than 10,000 m² (with a crane capacity of up to 25 tons), making us one of the most important trading companies in Europe. We always have more than approximately 500 secondhand machines on stock. Mainly German and Swiss quality brands are available, and great care is taken to uphold our tradition of superior workmanship. 
          Our personnel is schooled to make every effort to help our clients find a machine which is exactly right for their requirements. 
          We are proud of our friendly and competent service. After more than 40 years of practice in this business, where competition is hard, our success in Germany and on the worldwide market vouches for our seriousness and for the quality of our machines.

             WE BELONG TO THE FOLLOWING ORGANISATIONS:
            EAMTM Brussels (International). We are members since 1980.

             MAIN SPECIALITY
            Our main speciality is gear generating machines. We are one of the worldwide leaders in this area and always have a large selection of all types of gear machines available.

             DISKUS DOUBLE-SIDED SURFACE GRINDERS
            We also deal with DISKUS Double-Sided Surface Grinders, which are relatively seldom available on the market. We always have a choice of between 10 and 20 excellent machines on stock.

          SERVICES

          We buy machines and production plants from all over the world. If you sell us your machines, you can be sure of prompt inspection, payment, transportation, etc.


             AFTER-SALE SERVICE

            Our management takes pains to provide every customer with expert before-sale consultation; and reliable after-sale service, also with regard to procurement of spare parts, etc. Clients are welcome to visit our warehouses at any time. Machines which are of interest can be inspected under power, after prior appointment.


             TRANSPORTATION

            We can arrange for reasonably priced transportation if required. All machines are rust-protected and properly packed before they leave our stock. Machines being sent to overseas destinations are usually sent in containers, and in this important area we have a lot of packing experience, so that machines are certain to arrive in good order.


             ACCESSORIES AND SPARE PARTS

            Our after-sale service includes helping you to procure accessories and spare parts for our machines in the future.


             RECONDITIONING AND MODERNIZATION

            We can also recommend companies who specialize in reconditioning and retrofitting, etc.


             PRICE ESTIMATES

            If you are selling your company, or your production machines, and need a price estimate, our Director, Hans-Jürgen Geiger, is a qualified authority (FDM and EAMTM) and will be happy to help you.


          YOU ARE VERY WELCOME TO VISIT US

          How to find our company if you are driving:
          Coming on the A81/A8 (direction munich), please take the exit to B27 direction Tuebingen/Reutlingen. After about 10 km take the branch of direction Metzingen and after another 10 km please take the 1.exit Metzingen (industrial area Laengenfeld), take a left at the first opportunity and take another left at the junction, after 150 m you find us on the right side in the James-Watt-street 12.
            

             PDF-DOWNLOAD
           
          Anfahrtsskizze im PDF-Format

          With free Adobe Acrobat Reader software, you can view and print PDF files. 


          Our company is located near to Stuttgart International Airport. We would be happy to pick you up from there.

          There is a railway station in Metzingen. A train schedule is available on the internet at www.bahn.de. We can pick you up from the station. 

          Our office and showrooms are open from Monday to Friday, 0800 to 1800 hours. Other times by appointment only. We are closed for two weeks for the Christmas Holiday, from 21st December until 7th January. 

          Metzingen is located in a very pretty area in the south of Germany. It is famous for its good wines and for its various factory outlets (including Hugo Boss and Escada). 

          We can help you find a good hotel if you want to spend some time here.




          TOP Manufacturer:

          GLEASON HURTH - FÄSSLER - REISHAUER -

          Hans - Jürgen Geiger Maschinen-Vertrieb GmbH  72555 - Metzingen James-Watt-Str. 12 Deutschland
          Hans - Jürgen Geiger Maschinen-Vertrieb GmbH

          James-Watt-Str. 12



          Contact Trader


            Hans - Jürgen Geiger Maschinen-Vertrieb GmbH
           James-Watt-Str. 12
            72555 - Metzingen
            Deutschland
            (0049)-7123-18040
            (0049)-7123-18384
            geiger@geiger-germany.com
            www.geiger-germany.com
            Contact person:

           




          Machine category


          Abfallschere · Abkantpresse - hydraulisch · Abwälzfräs- und Stoßmaschine -kombiniert · Auswuchtmaschine · Bandsäge - horizontal · Bandsäge - Vertikal · Bandsägeautomat - Horizontal · Bearbeitungszentrum - Horizontal · Bearbeitungszentrum - Universal · Bearbeitungszentrum - Vertikal · Blechentgratungsmaschine · Bohr- und Fräsmaschine · Bohrerschleifmaschine · Bohrmaschine · Bohrwerkstisch · Bügelsägeautomat · CNC Drehmaschine · CNC-Karusselldrehmaschine - Einständer · Doppelscheibenschleifmaschine · Doppelscheibenschleifmaschine - vertik. · Doppelseitige Schleifmaschine · Drahterodiermaschine · Dreh-,Schwenk-, und Kipptisch · Drehmaschine - zyklengesteuert · Einständer - Ziehpresse - Hydraulisch · Einständerpresse - Hydraulisch · Entgratmaschine · Federprüfmaschine · Feinschleifmaschine · Flachschleifmaschine · Flachschleifmaschine - Horizontal · Formfräser-Schärfmaschine · Fräsmaschine - Universal · Fräswerkzeuge · Futterautomat - Einspindel · Gewinde-Schnecken-Schleifmaschine · Gewindefräsmaschine · Gewinderollmaschine · Gewindeschleifmaschine · Gewindewirbelmaschine · Graviermaschine · Hobel-, Fräs- und Schleifmaschine · Hochfrequenzspindel · Hochgeschwindigkeits Bearbeitungszentrum · Honmaschine - handbetätigt · Honmaschine - Innen - Vertikal · Hydraulische - Doppelständerziehpresse · Hydraulische - Viersäulenpresse · Hydraulische - Zweisäulenpresse · Härteanlage - Induktion · Härteofen · Innenschleifmaschine · Kaltkreissäge · Kaltkreissäge - Vertikal · Kaltwalzmaschine · Kegelrad - Läppmaschine · Kegelrad-Prüfmaschine · Kegelradschleifmaschine · Keilwellenschleifmaschine · Koordinatenmeßmaschine · Koordinatenschleifmaschine · Kreissägenautomat · Kurbelwellenbandfinishmaschine · Langdrehautomat · Lehrenbohrwerk - Vertikal · Leit- und Zugspindeldrehmaschine · Leiterplattenfertigungsmaschine · Läppmaschine · Messmaschine · Nutenziehmaschine · Oberfräsmaschine · Ofen - Elektro · Plandrehbank · Plattenbohrwerk - Horizontal · Plattensägen vertikal · Profilprojektor · Präzisionsbandsäge · Punktschweißmaschine · Radialbohrmaschine · Reihenbohrmaschine · Richtmaschine · Richtpresse - Doppelständer · Rißprüfmaschine · Rundschleifmaschine - Außen · Rundschleifmaschine - Universal · Rundtischflachschleifmaschine - Vertikal · Rundtischflächenschleifmaschine - Horiz. · Schabrad-Schärfmaschine · Schleifscheibenprofiliergerät · Schneidradschärfmaschine · Schweißanlage · Schwenkbarer - Rundtisch · Schwenkbiegemaschine · Senkerodiermaschine · Sonderfeinbohrmaschine · Sondermaschine · Spitzenlose - Rundschleifmaschine · Stanzautomat - Doppelständer · Strangpressen · Säulenbohrmaschine · Tafelschere - hydraulisch · Tafelschere - mechanisch · Teilapparat · Tieflochbohrmaschine · Tischbohrwerk · Trennschleifmaschine · Tuschierpresse · Universal - Rundtisch · Vorschubapparat · Werkzeugfräsmaschine - Universal · Werkzeugschleifmaschine · Werkzeugschleifmaschine - Universal · Wickelmaschine · Wärmeofen · Zahnflankenschleifmaschine · Zahnkantenfräsmaschine · Zahnrad-Abwälzfräsmaschine - horizontal · Zahnrad-Abwälzfräsmaschine - vertikal · Zahnradhonmaschine · Zahnradprüfmaschine · Zahnradschleifmaschine · Zahnradstossmaschine · Zahnstangenfräsmaschine · Zentrumschleifmaschine · Zugprüfmaschine ·