European network of stockholding machinery dealers

Bitte einen Suchbegriff eingeben - Please enter a search term
Category:
    Manufacturer:
      Machines:
        Trader:

          Gear Hobbing Machine - Horizontal

          Machinelist: Gear Hobbing Machine - Horizontal


          Gear Hobbing Machine - Horizontal

          used Gear cutting machines Gear Hobbing Machine - Horizontal BARBER COLMAN 16 - 16


          • EMUK GmbH Werkzeugmaschinen
          • Siemensstrasse 24 a
          • 76316 Malsch
          • Deutschland

          • +49 (0) 7246 1392
            +49 (0) 7246 1394
          • info@emuk.de
            www.emuk.de
          #1058-19056 · Gear Hobbing Machine - Horizontal

          BARBER COLMAN - 16 - 16 - - ca. 1980 -

          Technical details
          max. wheel diameter 406 mm︱gear width 420 mm︱max. module 4,3 ︱min. module 0,5 ︱hob turning speeds 49 - 246 U/min︱table bore diameter 80 mm︱total power requirement 7 kW︱weight of the machine ca. 3,5 t︱dimensions of the machine ca. 2,8 x 1,6 x 2,2 m︱
            max. wheel diameter 406 mm
            gear width 420 mm
            max. module 4,3
            min. module 0,5
            hob turning speeds 49 - 246 U/min
            table bore diameter 80 mm
            total power requirement 7 kW
            weight of the machine ca. 3,5 t
            dimensions of the machine ca. 2,8 x 1,6 x 2,2 m
            Description :



        • EMUK GmbH Werkzeugmaschinen
        • Siemensstrasse 24 a
        • 76316 Malsch
        • Deutschland

        • Datasheet
          Request / Contact
          used Gear cutting machines Gear Hobbing Machine - Horizontal GLEASON-PFAUTER P90


          • STEINHAND GmbH
          • Am Stahlwerk 15
          • 45527 Hattingen
          • Deutschland

          • +49 (0) 2324 / 977 26 - 01
            +49 (0) 2324 / 977 26 - 99
          • info@steinhand.de
            www.steinhand.de
          #2026-1643 · Gear Hobbing Machine - Horizontal

          GLEASON-PFAUTER - P90 - - 2015 - Siemens - Sinumerik 840 D

          Technical details
          workpiece dia. 100 mm︱module 3.0 mm︱fixture slide travel 400 mm︱Control Siemens - Sinumerik 840 D ︱max. milling cutter diameter 80 mm︱cutter length max. 180 mm︱turning speed range 50 - 12.000 U/min︱table turning speeds 3.000 U/min︱
          Gear Hobbing Machine - Horizontal | GLEASON-PFAUTER - P90 equipped with magnetic chip conveyor for dry and/or wet machining. Furnishing: - attached extraction system: Ringler, - with platform, - subindulgence, - subsequent loading and unloading handling: Epson - LS6-602S (built 2018), - sorting unit, - Calibration unit: Stotz, control: Siemens - HMI, - Work cell: Eagle - AMZ, with workpiece tray, - position check, - exit conveyor belt, - Control cabinet, with cooling unit: Rittal - Workspace, - tailstock, - measuring device, - refrigeration system, - Industrial robots: Epson, - goods carrier, - conveyor belts, - control panel, The machine is in very good condition. For additional equipment information please refer to the original order confirmation which is included in the offer of this machine. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: P 90 | P-90 | Gleason Pfauter P90
            workpiece dia. 100 mm
            module 3.0 mm
            fixture slide travel 400 mm
            Control Siemens - Sinumerik 840 D
            max. milling cutter diameter 80 mm
            cutter length max. 180 mm
            turning speed range 50 - 12.000 U/min
            table turning speeds 3.000 U/min
            Description :
            Gear Hobbing Machine - Horizontal | GLEASON-PFAUTER - P90
            equipped with magnetic chip conveyor for dry and/or wet machining.

            Furnishing:
            - attached extraction system: Ringler,
            - with platform,
            - subindulgence,
            - subsequent loading and unloading handling: Epson - LS6-602S (built 2018),
            - sorting unit,
            - Calibration unit: Stotz, control: Siemens - HMI,
            - Work cell: Eagle - AMZ, with workpiece tray,
            - position check,
            - exit conveyor belt,
            - Control cabinet, with cooling unit: Rittal
            - Workspace,
            - tailstock,
            - measuring device,
            - refrigeration system,
            - Industrial robots: Epson,
            - goods carrier,
            - conveyor belts,
            - control panel,


            The machine is in very good condition.

            For additional equipment information please refer
            to the original order confirmation which is included
            in the offer of this machine.

            - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
            #Tags: P 90 | P-90 | Gleason Pfauter P90


        • STEINHAND GmbH
        • Am Stahlwerk 15
        • 45527 Hattingen
        • Deutschland

        • Datasheet
          Request / Contact
          used Gear cutting machines Gear Hobbing Machine - Horizontal GLEASON-PFAUTER P60


          • STEINHAND GmbH
          • Am Stahlwerk 15
          • 45527 Hattingen
          • Deutschland

          • +49 (0) 2324 / 977 26 - 01
            +49 (0) 2324 / 977 26 - 99
          • info@steinhand.de
            www.steinhand.de
          #2026-1640 · Gear Hobbing Machine - Horizontal

          GLEASON-PFAUTER - P60 - - 2014 - Siemens - Sinumerik 840 D

          Technical details
          workpiece dia. 80 mm︱module 2,5 mm︱fixture slide travel 220 mm︱Control Siemens - Sinumerik 840 D ︱max. milling cutter diameter 100 mm︱cutter length max. 160 mm︱turning speed range 200 - 5.000 U/min︱table turning speeds 3.000 U/min︱
          Gear Hobbing Machine - Horizontal | GLEASON-PFAUTER - P60 equipped with magnetic chip conveyor for dry and/or wet machining. Furnishing: - attached exhaust system for dry processing: Ringler, - Noise insulation for dry milling machine - with platform, - subindulgence, - subsequent loading and unloading handling: Epson - LS6-602S (built 2018), - sorting unit, - Calibration unit: Stotz, control: Siemens - HMI, - Work cell: Eagle AMZ, with workpiece tray, - position check, - exit conveyor belt, - Control cabinet, with cooling unit: Rittal - coolant device, - Automation unit: AMZ, The machine is in very good condition. For additional equipment information please refer to the original order confirmation which is included in the offer of this machine. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: P 60 | P-60 | Gleason Pfauter P60
            workpiece dia. 80 mm
            module 2,5 mm
            fixture slide travel 220 mm
            Control Siemens - Sinumerik 840 D
            max. milling cutter diameter 100 mm
            cutter length max. 160 mm
            turning speed range 200 - 5.000 U/min
            table turning speeds 3.000 U/min
            Description :
            Gear Hobbing Machine - Horizontal | GLEASON-PFAUTER - P60
            equipped with magnetic chip conveyor for dry and/or wet machining.


            Furnishing:

            - attached exhaust system for dry processing: Ringler,
            - Noise insulation for dry milling machine
            - with platform,
            - subindulgence,
            - subsequent loading and unloading handling: Epson - LS6-602S (built 2018),
            - sorting unit,
            - Calibration unit: Stotz, control: Siemens - HMI,
            - Work cell: Eagle AMZ, with workpiece tray,
            - position check,
            - exit conveyor belt,
            - Control cabinet, with cooling unit: Rittal
            - coolant device,
            - Automation unit: AMZ,

            The machine is in very good condition.

            For additional equipment information please refer
            to the original order confirmation which is included
            in the offer of this machine.

            - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
            #Tags: P 60 | P-60 | Gleason Pfauter P60


        • STEINHAND GmbH
        • Am Stahlwerk 15
        • 45527 Hattingen
        • Deutschland

        • Datasheet
          Request / Contact
          used Gear cutting machines Gear Hobbing Machine - Horizontal GLEASON- PFAUTER P 60


          • Emuk Maschinenhandel GmbH
          • Siemensstrasse 24
          • 76316 Malsch
          • Deutschland

          • +49 (0) 7246 943161
          • info@emuk.info
            www.emuk.info
          #2070-E23022 · Gear Hobbing Machine - Horizontal

          GLEASON- PFAUTER - P 60 - - 2002 -

          Technical details
          max. wheel diameter 65 mm︱gear width 140 mm︱max. module 3 ︱min. module 0,5 ︱total power requirement kW︱weight of the machine ca. 4,8 t︱dimensions of the machine ca. 3,0 x 2,1 x 2,3 m︱
            max. wheel diameter 65 mm
            gear width 140 mm
            max. module 3
            min. module 0,5
            weight of the machine ca. 4,8 t
            dimensions of the machine ca. 3,0 x 2,1 x 2,3 m


        • Emuk Maschinenhandel GmbH
        • Siemensstrasse 24
        • 76316 Malsch
        • Deutschland

        • Datasheet
          Request / Contact
          used Gear cutting machines Gear Hobbing Machine - Horizontal PFAUTER P100


          • IVW GMBH
          • Niederrheinstr.298
          • 40489 Düsseldorf
          • Deutschland

          • (0049)211-4184428
            (0049)211-4184430
          • cd@ivwgmbh.com
            www.ivwgmbh.com
          #1088-E00864 · Gear Hobbing Machine - Horizontal

          PFAUTER - P100 - - 1999 - Siemens 840 C

          Technical details
          max. wheel diameter 90 mm︱gear width 50 mm︱max. module 3 ︱min. module 0,5 ︱Control Siemens 840 C ︱total power requirement 16 kW︱weight of the machine ca. 7,9 t︱dimensions of the machine ca. 2 x 2 x 2 m︱
            max. wheel diameter 90 mm
            gear width 50 mm
            max. module 3
            min. module 0,5
            Control Siemens 840 C
            total power requirement 16 kW
            weight of the machine ca. 7,9 t
            dimensions of the machine ca. 2 x 2 x 2 m


        • IVW GMBH
        • Niederrheinstr.298
        • 40489 Düsseldorf
        • Deutschland

        • Datasheet
          Request / Contact
          used Gear cutting machines Gear Hobbing Machine - Horizontal PFAUTER P100


          • IVW GMBH
          • Niederrheinstr.298
          • 40489 Düsseldorf
          • Deutschland

          • (0049)211-4184428
            (0049)211-4184430
          • cd@ivwgmbh.com
            www.ivwgmbh.com
          #1088-E00863 · Gear Hobbing Machine - Horizontal

          PFAUTER - P100 - - 1998 - Siemens 840 C

          Technical details
          max. wheel diameter 90 mm︱gear width 50 mm︱max. module 3 ︱min. module 0,5 ︱Control Siemens 840 C ︱total power requirement 16 kW︱weight of the machine ca. 7,9 t︱dimensions of the machine ca. 2 x 2 x 2 m︱
            max. wheel diameter 90 mm
            gear width 50 mm
            max. module 3
            min. module 0,5
            Control Siemens 840 C
            total power requirement 16 kW
            weight of the machine ca. 7,9 t
            dimensions of the machine ca. 2 x 2 x 2 m


        • IVW GMBH
        • Niederrheinstr.298
        • 40489 Düsseldorf
        • Deutschland

        • Datasheet
          Request / Contact
          used Gear cutting machines Gear Hobbing Machine - Horizontal PFAUTER P100


          • IVW GMBH
          • Niederrheinstr.298
          • 40489 Düsseldorf
          • Deutschland

          • (0049)211-4184428
            (0049)211-4184430
          • cd@ivwgmbh.com
            www.ivwgmbh.com
          #1088-E00862 · Gear Hobbing Machine - Horizontal

          PFAUTER - P100 - - 1997 - Siemens 840 C

          Technical details
          max. wheel diameter 90 mm︱gear width 50 mm︱max. module 3 ︱min. module 0,5 ︱Control Siemens 840 C ︱total power requirement 16 kW︱weight of the machine ca. 7,9 t︱dimensions of the machine ca. 2 x 2 x 2 m︱
            max. wheel diameter 90 mm
            gear width 50 mm
            max. module 3
            min. module 0,5
            Control Siemens 840 C
            total power requirement 16 kW
            weight of the machine ca. 7,9 t
            dimensions of the machine ca. 2 x 2 x 2 m


        • IVW GMBH
        • Niederrheinstr.298
        • 40489 Düsseldorf
        • Deutschland

        • Datasheet
          Request / Contact
          used Gear cutting machines Gear Hobbing Machine - Horizontal PFAUTER P100


          • IVW GMBH
          • Niederrheinstr.298
          • 40489 Düsseldorf
          • Deutschland

          • (0049)211-4184428
            (0049)211-4184430
          • cd@ivwgmbh.com
            www.ivwgmbh.com
          #1088-E00861 · Gear Hobbing Machine - Horizontal

          PFAUTER - P100 - - 1995 - Siemens 840 C

          Technical details
          max. wheel diameter 90 mm︱gear width 50 mm︱max. module 3 ︱min. module 0,5 ︱Control Siemens 840 C ︱total power requirement 16 kW︱weight of the machine ca. 7,5 t︱dimensions of the machine ca. 2 x 2 x 2 m︱
            max. wheel diameter 90 mm
            gear width 50 mm
            max. module 3
            min. module 0,5
            Control Siemens 840 C
            total power requirement 16 kW
            weight of the machine ca. 7,5 t
            dimensions of the machine ca. 2 x 2 x 2 m


        • IVW GMBH
        • Niederrheinstr.298
        • 40489 Düsseldorf
        • Deutschland

        • Datasheet
          Request / Contact
          used Gear cutting machines Gear Hobbing Machine - Horizontal PFAUTER PE 125 H


          • Emuk Maschinenhandel GmbH
          • Siemensstrasse 24
          • 76316 Malsch
          • Deutschland

          • +49 (0) 7246 943161
          • info@emuk.info
            www.emuk.info
          #2070-E23084 · Gear Hobbing Machine - Horizontal

          PFAUTER - PE 125 H - - 1992 - Bosch CC 220

          Technical details
          max. wheel diameter 130 mm︱gear width 400 mm︱max. module 3 ︱min. module 0,5 ︱Control Bosch CC 220 ︱milling spindle speeds (infinitely variable) 300 - 1200 U/min︱clamping length max. 1160 mm︱swivel angle for work spindle +/- 45 °︱x-travel 230 mm︱y-travel 170 mm︱z-travel 400 mm︱spindle speeds 1 - 125 mm︱total power requirement 52 kW︱weight of the machine ca. 7,5 t︱dimensions of the machine ca. 4,8 x 3,8 x 2,5 m︱
          Machine in very nice condition! More machines under www.emuk.info
            max. wheel diameter 130 mm
            gear width 400 mm
            max. module 3
            min. module 0,5
            Control Bosch CC 220
            milling spindle speeds (infinite. 300 - 1200 U/min
            clamping length max. 1160 mm
            swivel angle for work spindle +/- 45 °
            x-travel 230 mm
            y-travel 170 mm
            z-travel 400 mm
            spindle speeds 1 - 125 mm
            total power requirement 52 kW
            weight of the machine ca. 7,5 t
            dimensions of the machine ca. 4,8 x 3,8 x 2,5 m
            Description :
            Machine in very nice condition!
            More machines under www.emuk.info


        • Emuk Maschinenhandel GmbH
        • Siemensstrasse 24
        • 76316 Malsch
        • Deutschland

        • Datasheet
          Request / Contact
          used Gear cutting machines Gear Hobbing Machine - Horizontal MIKRON A 35/36 CNC


          • HANS - JÜRGEN GEIGER
          • James-Watt-Str. 12
          • 72555 Metzingen
          • Deutschland

          • (0049)-7123-18040
            (0049)-7123-18384
          • geiger@geiger-germany.com
            www.geiger-germany.com
          #1049-473370a · Gear Hobbing Machine - Horizontal

          MIKRON - A 35/36 CNC - - 1992 -

          Technical details
          max. wheel diameter 150 mm︱gear width 300 mm︱max. module 4,5 ︱min. module ︱total power requirement 20 kW︱weight of the machine ca. 6 t︱dimensions of the machine ca. m︱
            max. wheel diameter 150 mm
            gear width 300 mm
            max. module 4,5
            total power requirement 20 kW
            weight of the machine ca. 6 t


        • HANS - JÜRGEN GEIGER
        • James-Watt-Str. 12
        • 72555 Metzingen
        • Deutschland

        • Datasheet
          Request / Contact
          used Gear cutting machines Gear Hobbing Machine - Horizontal MIKRON A 33/1


          • HANS - JÜRGEN GEIGER
          • James-Watt-Str. 12
          • 72555 Metzingen
          • Deutschland

          • (0049)-7123-18040
            (0049)-7123-18384
          • geiger@geiger-germany.com
            www.geiger-germany.com
          #1049-448351 · Gear Hobbing Machine - Horizontal

          MIKRON - A 33/1 - - 1985 -

          Technical details
          max. wheel diameter 80 mm︱gear width 150 mm︱max. module 2,5 ︱min. module ︱total power requirement 10 kW︱weight of the machine ca. 2400 kg︱
          M I K R O N (Switzerland) Fully Automatic Gear Hobber for Worm Gears Model A 33 / 1 Year 1985 Ser.-No. 14.06/14.07/14.15 ____________________________________________________________ max. gear- without feed magazine approx. 80 mm max. gear- with feed magazine approx. 50 mm Module max. 2, / 2,5 Axial milling length approx. 150 mm max. workpiece-mounting length approx. 200 mm Milling slide can be swivelled up to 90 degrees Milling cutter - 24 - 50/63 mm Max. radial distance of milling slide 0-14/18 mm Milling cutter adjustment max. 25 mm Milling cutter speed 212 - 2.000 rpm Axial feed range infinitely adjustable 0,05 - 4,0 mm/workpiece rotation radial infinitely adjustable 0,2 - 200 mm/min. Milling spindle drive 3 kW Total electrical load approx. 10 kW - 50 Hz - 380 Volt Weight approx. 2.400 kg Accessories/Special Features: " Fully automatic operation cycle and minimum idle times due to programmable SIEMENS Program Controls S 5 for all machining steps i.e. rapid gear, feed, milling cutter on/off for the loading device, tailstock, possibly shifting, etc. with unit counter, program numbering including 30 different numeric error displays Pneumatic workpiece-loading and unloading facility parallel to work piece axis upright for rod workpieces approx. 140 mm long x 8 mm , including pneumatic double gripper for loading and unloading of work pieces. Raw parts are inserted into change cassettes externally and then placed into the loading device. The double gripper places the parts between workpiece spindle and tailstock, the tailstock spindle sleeve pushes the parts in the main spindle collet and clamps them simultaneously. The finished parts are ejected from the main spindle, then placed back again into the finished parts cassette by the gripper. The whole process is electrically monitored and checked. The complete loading facility is encased by plexiglass. " Hydraulic work piece clamping device including collets and hydraulic ejector " separate cooling system with magnetic separator * separate hydraulic system * various change gears This machine is set up for worm gears/armature shafts that can be used for adjustable car seats, window lifters, etc.
            max. wheel diameter 80 mm
            gear width 150 mm
            max. module 2,5
            total power requirement 10 kW
            weight of the machine ca. 2400 kg
            Description :
            M I K R O N (Switzerland)
            Fully Automatic Gear Hobber for Worm Gears
            Model A 33 / 1 Year 1985 Ser.-No. 14.06/14.07/14.15
            ____________________________________________________________

            max. gear- without feed magazine approx. 80 mm
            max. gear- with feed magazine approx. 50 mm
            Module max. 2, / 2,5

            Axial milling length approx. 150 mm
            max. workpiece-mounting length approx. 200 mm

            Milling slide can be swivelled up to 90 degrees
            Milling cutter - 24 - 50/63 mm
            Max. radial distance of milling slide 0-14/18 mm
            Milling cutter adjustment max. 25 mm
            Milling cutter speed 212 - 2.000 rpm

            Axial feed range infinitely adjustable 0,05 - 4,0 mm/workpiece rotation
            radial infinitely adjustable 0,2 - 200 mm/min.

            Milling spindle drive 3 kW
            Total electrical load approx. 10 kW - 50 Hz - 380 Volt
            Weight approx. 2.400 kg

            Accessories/Special Features:
            " Fully automatic operation cycle and minimum idle times due to programmable
            SIEMENS Program Controls S 5 for all machining steps i.e. rapid gear, feed, milling cutter on/off
            for the loading device, tailstock, possibly shifting, etc. with unit counter, program numbering
            including 30 different numeric error displays
            Pneumatic workpiece-loading and unloading facility parallel to work piece axis upright for rod workpieces approx. 140 mm long x 8 mm , including pneumatic double gripper for
            loading and unloading of work pieces. Raw parts are inserted into change cassettes externally and then placed into the loading device. The double gripper places the parts between workpiece spindle and tailstock,
            the tailstock spindle sleeve pushes the parts in the main spindle collet and clamps them simultaneously.
            The finished parts are ejected from the main spindle, then placed back again into the finished parts cassette by the gripper.
            The whole process is electrically monitored and checked.
            The complete loading facility is encased by plexiglass.
            " Hydraulic work piece clamping device including collets and hydraulic ejector
            " separate cooling system with magnetic separator * separate hydraulic system * various change gears

            This machine is set up for worm gears/armature shafts that can be used for adjustable
            car seats, window lifters, etc.



        • HANS - JÜRGEN GEIGER
        • James-Watt-Str. 12
        • 72555 Metzingen
        • Deutschland

        • Datasheet
          Request / Contact
          used Gear cutting machines Gear Hobbing Machine - Horizontal MIKRON A 33/0


          • HANS - JÜRGEN GEIGER
          • James-Watt-Str. 12
          • 72555 Metzingen
          • Deutschland

          • (0049)-7123-18040
            (0049)-7123-18384
          • geiger@geiger-germany.com
            www.geiger-germany.com
          #1049-482607 · Gear Hobbing Machine - Horizontal

          MIKRON - A 33/0 - - 1982 -

          Technical details
          max. wheel diameter 0 mm︱gear width 150 mm︱max. module 2,5 ︱min. module ︱total power requirement 10 kW︱weight of the machine ca. 2400 kg︱dimensions of the machine ca. m︱
            gear width 150 mm
            max. module 2,5
            total power requirement 10 kW
            weight of the machine ca. 2400 kg


        • HANS - JÜRGEN GEIGER
        • James-Watt-Str. 12
        • 72555 Metzingen
        • Deutschland

        • Datasheet
          Request / Contact
          used Gear cutting machines Gear Hobbing Machine - Horizontal MIKRON M122.01


          • Zuefle GmbH
          • Levi-Strauss-Str. 121
          • 97232 Giebelstadt
          • Deutschland

          • +49 (0)9334-978608-0
            +49 (0)9334-978608-2
          • info@zuefle.com
            www.zuefle.com
          #1139-00321 · Gear Hobbing Machine - Horizontal

          MIKRON - M122.01 - - 1980 -

          Technical details
          max. wheel diameter 40 mm︱gear width 35 mm︱max. module 1 ︱min. module 0 ︱voltage 380V 50Hz ︱total power requirement 0,61 kW︱weight of the machine ca. 320 kg︱dimensions of the machine ca. 70x67x134 cm︱
          We quote a horizontal and universal gear hobber of SWISS type MIKRON M122.01 in very good condition. This machine can hob spur and helical gears as well as worms up to module 1,00. The max. diameter is 40mm and width up to 35mm. With the machine is cooling pump with bassin and a set of changing wheels according to list and fixed in machine. Come for inspection to our storage in Giebelstadt, about 80min. from FRANKFURT AIRORT.
            max. wheel diameter 40 mm
            gear width 35 mm
            max. module 1
            voltage 380V 50Hz
            total power requirement 0,61 kW
            weight of the machine ca. 320 kg
            dimensions of the machine ca. 70x67x134 cm
            Description :
            We quote a horizontal and universal gear hobber of SWISS type MIKRON M122.01 in
            very good condition. This machine can hob spur and helical gears as well as
            worms up to module 1,00. The max. diameter is 40mm and width up to 35mm.

            With the machine is cooling pump with bassin and a set of changing wheels
            according to list and fixed in machine.

            Come for inspection to our storage in Giebelstadt, about 80min. from FRANKFURT
            AIRORT.



        • Zuefle GmbH
        • Levi-Strauss-Str. 121
        • 97232 Giebelstadt
        • Deutschland

        • 4.500 €
          Datasheet
          Request / Contact
          used Gear cutting machines Gear Hobbing Machine - Horizontal WMW ZFWZ 250 x 5A


          • EMUK GmbH Werkzeugmaschinen
          • Siemensstrasse 24 a
          • 76316 Malsch
          • Deutschland

          • +49 (0) 7246 1392
            +49 (0) 7246 1394
          • info@emuk.de
            www.emuk.de
          #1058-23254 · Gear Hobbing Machine - Horizontal

          WMW - ZFWZ 250 x 5A - - 1975 -

          Technical details
          tool taper MK4 ︱diameter of tools max. Ø 145 mm︱table-size L: 800 x B: 700 mm︱surface area Ø 300 mm︱table travel 200 mm︱indexing max 5 Modul︱total power requirement 7,5 kW︱weight of the machine ca. 4,9 t︱dimensions of the machine ca. 2,8 x 1,5 x 2,3 m︱
          Additional information: Application: Gear hobbing machine for gear cutting of spur and helical gears, worm gears and rollable profiles Cycle milling and single milling as well as up-cut and climb milling Specifications for machining spur and worm gears: -Outer Ø max. 250mm with counterholder -pitch max. 5mm -Tooth helix max. 45° -Tooth width max. axial milling 200mm and radial-axial milling 240mm -Milling width max. clamping table counterholder 655mm Milling slide: -swivelling 210° -travelling distance 350mm -feed, 2 directions, 16 steps in the range 0.2 - 6.3 mm/revolution Further features: -counter-point taper MK4, co-rotating -Centre distance of milling/clamping spindle with counter-holder min./max.: 30 / 240 mm -Counterholder with guide bushes (clamping arbor and milling arbor)
            tool taper MK4
            diameter of tools max. Ø 145 mm
            table-size L: 800 x B: 700 mm
            surface area Ø 300 mm
            table travel 200 mm
            indexing max 5 Modul
            total power requirement 7,5 kW
            weight of the machine ca. 4,9 t
            dimensions of the machine ca. 2,8 x 1,5 x 2,3 m
            Description :
            Additional information:

            Application: Gear hobbing machine for gear cutting of spur and helical gears,
            worm gears and rollable profiles
            Cycle milling and single milling as well as up-cut and climb milling

            Specifications for machining spur and worm gears:
            -Outer Ø max. 250mm with counterholder
            -pitch max. 5mm
            -Tooth helix max. 45°
            -Tooth width max. axial milling 200mm and radial-axial milling 240mm
            -Milling width max. clamping table counterholder 655mm

            Milling slide:
            -swivelling 210°
            -travelling distance 350mm
            -feed, 2 directions, 16 steps in the range 0.2 - 6.3 mm/revolution

            Further features:
            -counter-point taper MK4, co-rotating
            -Centre distance of milling/clamping spindle with counter-holder min./max.: 30 /
            240 mm
            -Counterholder with guide bushes (clamping arbor and milling arbor)



        • EMUK GmbH Werkzeugmaschinen
        • Siemensstrasse 24 a
        • 76316 Malsch
        • Deutschland

        • Datasheet
          Request / Contact
          used Gear cutting machines Gear Hobbing Machine - Horizontal KOEPFER 172


          • Emuk Maschinenhandel GmbH
          • Siemensstrasse 24
          • 76316 Malsch
          • Deutschland

          • +49 (0) 7246 943161
          • info@emuk.info
            www.emuk.info
          #2070-E23086 · Gear Hobbing Machine - Horizontal

          KOEPFER - 172 - - 1972 -

          Technical details
          max. wheel diameter 120 mm︱gear width 150 mm︱max. module 2,5 ︱min. module 0,3 ︱turning speeds 112 - 1000 U/min︱min. number of teeth 6 ︱clamping length max. 300 mm︱total power requirement 3,5 kW︱weight of the machine ca. 1,8 t︱dimensions of the machine ca. 1,3 x 1,2 x 1,5 m︱
            max. wheel diameter 120 mm
            gear width 150 mm
            max. module 2,5
            min. module 0,3
            turning speeds 112 - 1000 U/min
            min. number of teeth 6
            clamping length max. 300 mm
            total power requirement 3,5 kW
            weight of the machine ca. 1,8 t
            dimensions of the machine ca. 1,3 x 1,2 x 1,5 m
            Description :



        • Emuk Maschinenhandel GmbH
        • Siemensstrasse 24
        • 76316 Malsch
        • Deutschland

        • Datasheet
          Request / Contact
          used Gear cutting machines Gear Hobbing Machine - Horizontal KOEPFER 135


          • Kurt Steiger Werkzeugmaschinen GmbH
          • Flachstr. 11
          • 65197 Wiesbaden
          • Deutschland

          • +49 (0) 611/421047
            +49 (0) 611/421040
          • info@kurt-steiger.de
            www.kurt-steiger.de
          #2043-26365B · Gear Hobbing Machine - Horizontal

          KOEPFER - 135 - - 1968 -

          Technical details
          max. wheel diameter mm︱gear width mm︱max. module 0︱min. module 0︱total power requirement kW︱weight of the machine ca. t︱required space m︱
          Gr. to fraesender Ø 24 mm milling cutter diameter: 70 mm
          Gr. to fraesender Ø 50 mm milling cutter diameter: 46 mm
          Gr. to fraesender Ø Magazine: 40 mm
          Gr. Milling length minus gate: 75 mm
          Gr. Workpiece length with magazine: 75 mm
          Gr. Depth: 4 mm
          Gr. Module: 1.25
          KL. being milled tooth number: 3
          Main spindle hole: 18 mm
          Clamping Collet clamping area: 3-18 mm
          I9cyejl
          9 cutter speed: 222-1410 RPM
          10 longitudinal feeds: 0.031-1.25 mm
          Electr. Supply: 380 V, 1 kW
          Weight: 850 kg
          Space requirements: 1050 x 700 x 1500 mm
            Description :
            Gr. to fraesender Ø 24 mm milling cutter diameter: 70 mm

            Gr. to fraesender Ø 50 mm milling cutter diameter: 46 mm

            Gr. to fraesender Ø Magazine: 40 mm

            Gr. Milling length minus gate: 75 mm

            Gr. Workpiece length with magazine: 75 mm

            Gr. Depth: 4 mm

            Gr. Module: 1.25

            KL. being milled tooth number: 3

            Main spindle hole: 18 mm

            Clamping Collet clamping area: 3-18 mm

            I9cyejl

            9 cutter speed: 222-1410 RPM

            10 longitudinal feeds: 0.031-1.25 mm

            Electr. Supply: 380 V, 1 kW

            Weight: 850 kg

            Space requirements: 1050 x 700 x 1500 mm


        • Kurt Steiger Werkzeugmaschinen GmbH
        • Flachstr. 11
        • 65197 Wiesbaden
        • Deutschland

        • Datasheet
          Request / Contact
          used Gear cutting machines Gear Hobbing Machine - Horizontal KOEPFER 170


          • Emuk Maschinenhandel GmbH
          • Siemensstrasse 24
          • 76316 Malsch
          • Deutschland

          • +49 (0) 7246 943161
          • info@emuk.info
            www.emuk.info
          #2070-24039 · Gear Hobbing Machine - Horizontal

          KOEPFER - 170 - - -

          Technical details
          max. wheel diameter 130 mm︱gear width 140 mm︱max. module 2,5 ︱min. module 0,3 ︱turning speeds 112 - 1000 U/min︱min. number of teeth 6 ︱clamping length max. 150 mm︱total power requirement 3,5 kW︱weight of the machine ca. 2,1 t︱dimensions of the machine ca. 1,3 x 1,2 x 1,5 m︱
            max. wheel diameter 130 mm
            gear width 140 mm
            max. module 2,5
            min. module 0,3
            turning speeds 112 - 1000 U/min
            min. number of teeth 6
            clamping length max. 150 mm
            total power requirement 3,5 kW
            weight of the machine ca. 2,1 t
            dimensions of the machine ca. 1,3 x 1,2 x 1,5 m
            Description :



        • Emuk Maschinenhandel GmbH
        • Siemensstrasse 24
        • 76316 Malsch
        • Deutschland

        • Datasheet
          Request / Contact

          Gear Hobbing Machine - Vertical

          used Gear cutting machines Gear Hobbing Machine - Vertical KOHCHIYAMA TECH SH-55


          • Kemmerich Werkzeugmaschinen
          • Im Rottfeld 1a
          • 40789 Monheim am Rhein
          • Deutschland

          • +49 2173 207474
            +49 2173 207473
          • info@kemmerich.biz
            www.kemmerich.biz
          #1020-20171 · Gear Hobbing Machine - Vertical

          KOHCHIYAMA TECH - SH-55 - - 2014 - FANUC 31i MODEL B

          Technical details
          max. wheel diameter 5500 mm︱gear width 1500 mm︱max. module 32 ︱faceplate diameter 3740 mm︱swing diameter 6200 mm︱turning height 1200 mm︱control FANUC 31i MODEL B1250 mm︱cross rail - adjustment 3000 mm︱turning speeds 3-15 U/min︱spindle turning speed - stepless 15 - 1500 U/min︱workpiece weight 39,4 t︱max. dia. of teeth cutting 5500 mm︱tooth width 550 mm︱module 32 ︱cutter speeds 10 -150 U/min︱milling cutter dia. x width 450 x 110 mm︱milling head axial adjustable 2060 mm︱total power requirement - kW︱weight of the machine ca. - t︱
          Complex TurnMill & Gear Cutting Machine - CNC control FANUC 31i B - Turning and Milling Function - ATC - Angular Milling Head - Gear Hobbing (internal and external) - Chip Conveyor
            max. wheel diameter 5500 mm
            gear width 1500 mm
            max. module 32
            faceplate diameter 3740 mm
            swing diameter 6200 mm
            turning height 1200 mm
            control FANUC 31i MODEL B
            1250 mm
            cross rail - adjustment 3000 mm
            turning speeds 3-15 U/min
            spindle turning speed - stepless 15 - 1500 U/min
            workpiece weight 39,4 t
            max. dia. of teeth cutting 5500 mm
            tooth width 550 mm
            module 32
            cutter speeds 10 -150 U/min
            milling cutter dia. x width 450 x 110 mm
            milling head axial adjustable 2060 mm
            total power requirement - kW
            weight of the machine ca. - t
            Description :
            Complex TurnMill & Gear Cutting Machine

            - CNC control FANUC 31i B
            - Turning and Milling Function
            - ATC
            - Angular Milling Head
            - Gear Hobbing (internal and external)
            - Chip Conveyor


        • Kemmerich Werkzeugmaschinen
        • Im Rottfeld 1a
        • 40789 Monheim am Rhein
        • Deutschland

        • Datasheet
          Request / Contact
          used Gear cutting machines Gear Hobbing Machine - Vertical LIEBHERR LC 3000 CNC


          • Kemmerich Werkzeugmaschinen
          • Im Rottfeld 1a
          • 40789 Monheim am Rhein
          • Deutschland

          • +49 2173 207474
            +49 2173 207473
          • info@kemmerich.biz
            www.kemmerich.biz
          #1020-20040 · Gear Hobbing Machine - Vertical

          LIEBHERR - LC 3000 CNC - - 2009 - Siemens 840D

          Technical details
          max. wheel diameter 3000 mm︱gear width 500 mm︱max. module 25 / 40 ︱spindle turning speed range 250 U/min︱feed speeds max. 4000 mm/min︱faceplate diameter 2000 mm︱table bore diameter 700 mm︱table turning speeds 51 U/min︱power capacity - milling spindle 53 kW︱drive motor for milling spindle - kW︱axial adjustment 1200 mm︱milling head swivable ca. +/- 45 °︱control Siemens 840D ︱total power requirement - kW︱weight of the machine ca. 55 t︱dimensions of the machine ca. - m︱
          - CNC Control Siemens 840D - Internal Hob Head IFK - External Hob Head 2 machines available
            max. wheel diameter 3000 mm
            gear width 500 mm
            max. module 25 / 40
            spindle turning speed range 250 U/min
            feed speeds max. 4000 mm/min
            faceplate diameter 2000 mm
            table bore diameter 700 mm
            table turning speeds 51 U/min
            power capacity - milling spindle 53 kW
            drive motor for milling spindle - kW
            axial adjustment 1200 mm
            milling head swivable ca. +/- 45 °
            control Siemens 840D
            total power requirement - kW
            weight of the machine ca. 55 t
            dimensions of the machine ca. - m
            Description :
            - CNC Control Siemens 840D
            - Internal Hob Head IFK
            - External Hob Head

            2 machines available


        • Kemmerich Werkzeugmaschinen
        • Im Rottfeld 1a
        • 40789 Monheim am Rhein
        • Deutschland

        • Datasheet
          Request / Contact
          used Gear cutting machines Gear Hobbing Machine - Vertical GLEASON- PFAUTER P 1200


          • EMUK GmbH Werkzeugmaschinen
          • Siemensstrasse 24 a
          • 76316 Malsch
          • Deutschland

          • +49 (0) 7246 1392
            +49 (0) 7246 1394
          • info@emuk.de
            www.emuk.de
          #1058-E23258 · Gear Hobbing Machine - Vertical

          GLEASON- PFAUTER - P 1200 - - 2008 - Siemens 840 D

          Technical details
          max. wheel diameter 1200 mm︱gear width 1000 mm︱max. module 25/36 ︱min. module 1 ︱Control Siemens 840 D ︱table load 15 t︱total power requirement 75 kW︱weight of the machine ca. 24 t︱dimensions of the machine ca. 6,5x4x3,75 m︱
          Gleason-PFAUTER CNC hobbing machine P 1200 for gear cutting of cylindrical and worm gears worm gears and all other rolling profiles and shapes that regularly occur on the cylindrical workpiece circumference. Remark: Machine designed for external milling, large milling head M3. Machine with counter stand. Scope of equipment: - Basic machine P 1200, Siemens 840D PowerLine (XP) - Motorised milling head M3 - Special speed series motorised milling head M3 - Extended software for fault diagnosis - Main stand - raised 1000mm - 2 x fume separator make "3nine" type EMMA - Chip scraper conveyor - Set of adjusting wedges - Dialogue program "Milling in single-part process" - Switching the machine (dry/wet) - Counterholder tip - travelling - - Magnetic roller - Clamping upper part - complete - Clamping device - complete - Special chip separator - Special chip separator - Signal light (3-coloured) - Telephone diagnosis system - Swivelling counter bearing holder - Monitoring devices - Warm-up programme - Network connection (Ethernet) - Dialogue program "Saving shifting data" - Dialogue program "Saving damaged areas" - 19" flat control panel OP 015A - Rinsing gun - Special software Free travelling counterholder - Intermediate plate 300 mm for raising the counter support position - Milling arbor 40 mm diameter changed to milling arbor 60 mm - BDE/MDE interface in the machine control cabinet - Oil separation systems 3nine System EMMA Working range and technical data: - Nominal workpiece diameter... 1,200 mm - Gear hobbing approx... 25 mm - Tooth moulding approx... 35 mm Guide values depending on the respective machining task Smallest/largest distance between milling cutter and workpiece axis... 100 / 750 mm Largest axial slide path... 1,000 mm (special design) Largest clampable hob cutter - Ø 450 mm Length... 500 mm Swivelling range of the milling head... + 30/- 45º Cutter arbour taper... HSK-B160 (hollow shank taper according to DIN 69063) Largest milling cutter movement... 450 mm Table diameter... 1,200 mm Table bore - Ø 300 mm Depth... 875 mm Maximum table load approx... 15,000 kg Workpiece: - Module max. 25 mm (in steel, 600N/mm²), - Module profile milling max. 35 mm, - Ø max. 1,200 mm, Roll milling cutter: - Head circle Ø max. 450 mm, - length max. 500 mm, - Carriage paths: X/Y/Z- 800 / 450 / 1,000 mm, - Milling head swivelling angle... +A/-A-30/15 degrees, - Hydraulic unit, made by Parker,
            max. wheel diameter 1200 mm
            gear width 1000 mm
            max. module 25/36
            min. module 1
            Control Siemens 840 D
            table load 15 t
            total power requirement 75 kW
            weight of the machine ca. 24 t
            dimensions of the machine ca. 6,5x4x3,75 m
            Description :
            Gleason-PFAUTER CNC hobbing machine P 1200 for gear cutting of cylindrical and
            worm gears worm gears and all other rolling profiles and shapes that regularly
            occur on the cylindrical workpiece circumference.

            Remark:
            Machine designed for external milling, large milling head M3. Machine with
            counter stand.

            Scope of equipment:
            - Basic machine P 1200, Siemens 840D PowerLine (XP)
            - Motorised milling head M3
            - Special speed series motorised milling head M3
            - Extended software for fault diagnosis
            - Main stand - raised 1000mm
            - 2 x fume separator make "3nine" type EMMA
            - Chip scraper conveyor
            - Set of adjusting wedges
            - Dialogue program "Milling in single-part process"
            - Switching the machine (dry/wet)
            - Counterholder tip - travelling -
            - Magnetic roller
            - Clamping upper part - complete
            - Clamping device - complete - Special chip separator
            - Special chip separator
            - Signal light (3-coloured)
            - Telephone diagnosis system
            - Swivelling counter bearing holder
            - Monitoring devices
            - Warm-up programme
            - Network connection (Ethernet)
            - Dialogue program "Saving shifting data"
            - Dialogue program "Saving damaged areas"
            - 19" flat control panel OP 015A
            - Rinsing gun
            - Special software Free travelling counterholder
            - Intermediate plate 300 mm for raising the counter support position
            - Milling arbor 40 mm diameter changed to milling arbor 60 mm
            - BDE/MDE interface in the machine control cabinet
            - Oil separation systems 3nine System EMMA

            Working range and technical data:

            - Nominal workpiece diameter... 1,200 mm
            - Gear hobbing approx... 25 mm
            - Tooth moulding approx... 35 mm

            Guide values depending on the respective machining task

            Smallest/largest distance between milling cutter and workpiece axis... 100 /
            750 mm
            Largest axial slide path... 1,000 mm (special design)

            Largest clampable hob cutter - Ø 450 mm
            Length... 500 mm

            Swivelling range of the milling head... + 30/- 45º
            Cutter arbour taper... HSK-B160 (hollow shank taper according to DIN 69063)

            Largest milling cutter movement... 450 mm
            Table diameter... 1,200 mm

            Table bore - Ø 300 mm
            Depth... 875 mm
            Maximum table load approx... 15,000 kg

            Workpiece:
            - Module max. 25 mm (in steel, 600N/mm²),
            - Module profile milling max. 35 mm,
            - Ø max. 1,200 mm,

            Roll milling cutter:
            - Head circle Ø max. 450 mm,
            - length max. 500 mm,
            - Carriage paths: X/Y/Z- 800 / 450 / 1,000 mm,
            - Milling head swivelling angle... +A/-A-30/15 degrees,
            - Hydraulic unit, made by Parker,


        • EMUK GmbH Werkzeugmaschinen
        • Siemensstrasse 24 a
        • 76316 Malsch
        • Deutschland

        • Datasheet
          Request / Contact
          used Gear cutting machines Gear Hobbing Machine - Vertical GLEASON- PFAUTER P 1200


          • EMUK GmbH Werkzeugmaschinen
          • Siemensstrasse 24 a
          • 76316 Malsch
          • Deutschland

          • +49 (0) 7246 1392
            +49 (0) 7246 1394
          • info@emuk.de
            www.emuk.de
          #1058-E23256 · Gear Hobbing Machine - Vertical

          GLEASON- PFAUTER - P 1200 - - 2008 - Siemens 840 D PowerLine

          Technical details
          max. wheel diameter 1200 mm︱gear width 1000 mm︱max. module 25/36 Modul︱min. module 1 ︱Control Siemens 840 D PowerLine︱table diameter 1200 mm︱table load 15 t︱total power requirement kW︱weight of the machine ca. 24 t︱dimensions of the machine ca. 6,5 x 4 x 3,75 m︱
          Gleason-PFAUTER CNC hobbing machine P 1200 for gear cutting of cylindrical and worm gears worm gears and all other rolling profiles and shapes that regularly occur on the cylindrical workpiece circumference. Remark: Machine designed for external milling, large milling head M3. Machine with counter stand. Scope of equipment: - Basic machine P 1200, Siemens 840D PowerLine (XP) - Motorised milling head M3 - Special speed series motorised milling head M3 - Extended software for fault diagnosis - Main stand - raised 1000mm - Power clamping device - 2 x fume separator make "3nine" type EMMA - Chip scraper conveyor - Set of adjustable wedges - Dialogue program "Milling in single-part process" - Magnetic roller - Special chip separator - Counterholder sleeve - Holder for oscillating pressure bell - Signal light (3-coloured) - Telephone diagnosis system - Swivelling counter bearing holder - Monitoring devices - Warm-up programme - Network connection (Ethernet) - Dialogue program "Saving shifting data" - Dialogue program "Saving damaged areas" - 19" flat control panel OP 015A - Rinsing gun - Special software for free movement of counterholder - Measuring device for P1200 - Intermediate plate 300 mm for raising the counter support position - Milling arbor 40 mm diameter changed to milling arbor 60 mm - BDE/MDE interface in the machine control cabinet - Oil separation systems 3nine System EMMA Working range and technical data: - Nominal workpiece diameter... 1.200 mm - Gear hobbing approx... 25 mm - Tooth moulding approx... 35 mm Guide values depending on the respective machining task. - Smallest/largest distance between milling cutter and workpiece axis 100/750 mm - Largest axial slide path... 1.000 mm (special design) - Largest clampable hob cutter - Ø... 450 mm - Length... 500 mm - Swivelling range of the milling head... .+ 30/- 45º - Cutter arbour taper... HSK-B160 - (hollow shank taper according to DIN 69063) - Largest milling cutter movement... 450 mm - Table diameter . . . . . . . .. .1.200 mm - Table bore - Ø... 300 mm - Depth... 875 mm - Maximum table load approx... 15.000 kg Workpiece: - Module max. 25 mm (in steel, 600N/mm²), - Module profile milling max. 35 mm, - Ø max. 1.200 mm, Roll milling cutter: - Head circle Ø max. 450 mm, - length max. 500 mm, carriage travel: X/Y/Z - 800 /450 / 1.000 mm, - Milling head swivelling angle +A/-A: 30/15 degrees, - Hydraulic unit, Parker, - filter, Indusa, type DL2500N Jet, Year of manufacture 2015, max. air capacity 2.500 m³/hour.
            max. wheel diameter 1200 mm
            gear width 1000 mm
            max. module 25/36 Modul
            min. module 1
            Control Siemens 840 D PowerLine
            table diameter 1200 mm
            table load 15 t
            weight of the machine ca. 24 t
            dimensions of the machine ca. 6,5 x 4 x 3,75 m
            Description :
            Gleason-PFAUTER CNC hobbing machine P 1200 for gear cutting of cylindrical and
            worm gears worm gears and all other rolling profiles and shapes that regularly
            occur on the cylindrical workpiece circumference.

            Remark:
            Machine designed for external milling, large milling head M3. Machine with
            counter stand.

            Scope of equipment:
            - Basic machine P 1200, Siemens 840D PowerLine (XP)
            - Motorised milling head M3
            - Special speed series motorised milling head M3
            - Extended software for fault diagnosis
            - Main stand - raised 1000mm
            - Power clamping device
            - 2 x fume separator make "3nine" type EMMA
            - Chip scraper conveyor
            - Set of adjustable wedges
            - Dialogue program "Milling in single-part process"
            - Magnetic roller
            - Special chip separator
            - Counterholder sleeve
            - Holder for oscillating pressure bell
            - Signal light (3-coloured)
            - Telephone diagnosis system
            - Swivelling counter bearing holder
            - Monitoring devices
            - Warm-up programme
            - Network connection (Ethernet)
            - Dialogue program "Saving shifting data"
            - Dialogue program "Saving damaged areas"
            - 19" flat control panel OP 015A
            - Rinsing gun
            - Special software for free movement of counterholder
            - Measuring device for P1200
            - Intermediate plate 300 mm for raising the counter support position
            - Milling arbor 40 mm diameter changed to milling arbor 60 mm
            - BDE/MDE interface in the machine control cabinet
            - Oil separation systems 3nine System EMMA

            Working range and technical data:

            - Nominal workpiece diameter... 1.200 mm
            - Gear hobbing approx... 25 mm
            - Tooth moulding approx... 35 mm

            Guide values depending on the respective machining task.

            - Smallest/largest distance between milling cutter and workpiece axis 100/750 mm
            - Largest axial slide path... 1.000 mm (special design)
            - Largest clampable hob cutter - Ø... 450 mm
            - Length... 500 mm
            - Swivelling range of the milling head... .+ 30/- 45º
            - Cutter arbour taper... HSK-B160 - (hollow shank taper according to DIN 69063)
            - Largest milling cutter movement... 450 mm
            - Table diameter . . . . . . . .. .1.200 mm
            - Table bore - Ø... 300 mm
            - Depth... 875 mm
            - Maximum table load approx... 15.000 kg

            Workpiece:
            - Module max. 25 mm (in steel, 600N/mm²),
            - Module profile milling max. 35 mm,
            - Ø max. 1.200 mm,

            Roll milling cutter:
            - Head circle Ø max. 450 mm,
            - length max. 500 mm, carriage travel: X/Y/Z - 800 /450 / 1.000 mm,
            - Milling head swivelling angle +A/-A: 30/15 degrees,
            - Hydraulic unit, Parker,
            - filter, Indusa, type DL2500N Jet,
            Year of manufacture 2015, max. air capacity 2.500 m³/hour.


        • EMUK GmbH Werkzeugmaschinen
        • Siemensstrasse 24 a
        • 76316 Malsch
        • Deutschland

        • Datasheet
          Request / Contact
          used Gear cutting machines Gear Hobbing Machine - Vertical GLEASON- PFAUTER P 1200


          • Leyendecker & Hollmann GmbH
          • Giesenheide 18
          • 40724 Hilden
          • Deutschland

          • +49 (2103) 28097-0
            +49 (2103) 28097-99
          • info@LHmachine.com
            www.LHmachine.com
          #1083-03264 · Gear Hobbing Machine - Vertical

          GLEASON- PFAUTER - P 1200 - - 2008 - Simens 840 D PL

          Technical details
          max. wheel diameter 1200 mm︱gear width ca. 800 mm︱max. module 25/35 ︱Control Simens 840 D PL ︱workpiece diameter 1200 mm︱Hobbing approx. 25 mm︱tooth form milling approx. 35 mm︱axial slide travel 1000 mm︱table diameter 1200 mm︱table bore diameter 300 mm︱table load 15000 kg︱total power requirement 110 kW︱weight of the machine ca. 24,5 t︱dimensions of the machine ca. 8,1 x 6,2 x 3,8 m︱
          Equipment/Accessoires: - Motor milling head M3 special speed series - Colum - increased 1. 000 mm - Clamping device - Dialogue program “Milling in single-indexing process” - Telephone diagnostic system - swivelable counter bearing holder - measuring device - machine with counter steady - documentation
            max. wheel diameter 1200 mm
            gear width ca. 800 mm
            max. module 25/35
            Control Simens 840 D PL
            workpiece diameter 1200 mm
            Hobbing approx. 25 mm
            tooth form milling approx. 35 mm
            axial slide travel 1000 mm
            table diameter 1200 mm
            table bore diameter 300 mm
            table load 15000 kg
            total power requirement 110 kW
            weight of the machine ca. 24,5 t
            dimensions of the machine ca. 8,1 x 6,2 x 3,8 m
            Description :
            Equipment/Accessoires:
            - Motor milling head M3 special speed series
            - Colum - increased 1. 000 mm
            - Clamping device
            - Dialogue program “Milling in single-indexing process”
            - Telephone diagnostic system
            - swivelable counter bearing holder
            - measuring device
            - machine with counter steady
            - documentation



        • Leyendecker & Hollmann GmbH
        • Giesenheide 18
        • 40724 Hilden
        • Deutschland

        • Datasheet
          Request / Contact
          used Gear cutting machines Gear Hobbing Machine - Vertical GLEASON- PFAUTER P2000/2400


          • Leyendecker & Hollmann GmbH
          • Giesenheide 18
          • 40724 Hilden
          • Deutschland

          • +49 (2103) 28097-0
            +49 (2103) 28097-99
          • info@LHmachine.com
            www.LHmachine.com
          #1083-03266 · Gear Hobbing Machine - Vertical

          GLEASON- PFAUTER - P2000/2400 - - 2008 - Sinumerik 840 D

          Technical details
          max. wheel diameter 2400 mm︱gear width 600 mm︱max. module 30 ︱Control Sinumerik 840 D ︱workpiece external diameter max. 3400 ︱rim strength max. 500 ︱radial slide travel 1050 mm︱axial slide travel 1600 mm︱swivelling range milling head +- 15 °︱table diameter 1870 mm︱table hole ︱diameter 600 mm︱depth 875 mm︱table load capacity - central/maximum 30000 kg︱workpiece ︱tip circle diameter 440 mm︱root circle dia. min. 310 mm︱cutter width - max. 120 mm︱total power requirement 100 kW︱weight of the machine ca. 37,5 t︱
          machine can be used only for internal gears - dry cutting type Equipment/accessories: - column increased - internal head IKF2 - big clamping table - documentation
            max. wheel diameter 2400 mm
            gear width 600 mm
            max. module 30
            Control Sinumerik 840 D
            workpiece external diameter max. 3400
            rim strength max. 500
            radial slide travel 1050 mm
            axial slide travel 1600 mm
            swivelling range milling head +- 15 °
            table diameter 1870 mm
            diameter 600 mm
            depth 875 mm
            table load capacity - central/ma. 30000 kg
            tip circle diameter 440 mm
            root circle dia. min. 310 mm
            cutter width - max. 120 mm
            total power requirement 100 kW
            weight of the machine ca. 37,5 t
            Description :
            machine can be used only for internal gears - dry cutting type

            Equipment/accessories:
            - column increased
            - internal head IKF2
            - big clamping table
            - documentation


        • Leyendecker & Hollmann GmbH
        • Giesenheide 18
        • 40724 Hilden
        • Deutschland

        • Datasheet
          Request / Contact
          used Gear cutting machines Gear Hobbing Machine - Vertical GLEASON PFAUTER P 2800


          • Knops Werkzeugmaschinen
          • Konrad-Zuse-Straße 5
          • 40789 Monheim
          • Deutschland

          • 02173 - 39494-0
            02173 - 39494-29
          • maschinen@knops.de
            www.knops.de
          #1022-E06195 · Gear Hobbing Machine - Vertical

          GLEASON PFAUTER - P 2800 - - 2007 - Siemens 840 D

          Technical details
          max. wheel diameter 2800 mm︱gear width - mm︱max. module 20/30 ︱min. module ︱Control Siemens 840 D ︱total power requirement 40 kW︱weight of the machine ca. 50 t︱dimensions of the machine ca. 7 x 4,5 x 4,75 m︱
          The machine has only a few working hours and is like new. - The price of the new machine of this caliber is €2.35 million - With minimal operating hours, the machine is essentially new. - It is one of Gleason's largest machines - It has the possibility of dry or wet milling; and internal and external gearing. - The machine underwent a comprehensive manufacturer's inspection in July 2023 and is in impeccable working order. - Machine is currently partially assembled to allow potential buyers to verify all functionalities. If you wish to see the machine in operation, we have two identical machines running in our production facility, and you are welcome. CNC control Siemens 840 D Nominal workpiece diameter: 2800 mm Table diameter: 2500 mm Pitch wheel diameter: 2,200 mm Table bore diameter: 800 mm Table bore depth: 875 mm Machine nominal module Hobbing aprrox. 20 mm gear Milling approx.: 30 mm Smallest/largest distance between milling cutter and workpiece axis: 600/1,735 mm Largest axial slide path – special design: 1,000 mm Largest champable hob diameter: 350 mm Largest champable hob length: 375 mm Swivel range of the milling head: + 30/- 45o cutter arbor cone: HSK-B160 (hollow shank taper according to DIN 69063) Largest milling cutter displacement path: 300 mm SIEMENS path control SINUMERIK 840 D with 5 axes and 1 spindle (basic configuration) as well as electronic gear (EG) and integrated safety functions. MOTOR MILLING HEADS - for INTERNAL gears: I1 Millable nominal module in steel with a strength of around 600 N/mm2 approx. 25mm+ Cutter speed range 25 - 150 min-1 Min./Max. Wheelbase 280/1,820 mm Min. workpiece inner diameter approx. 1,000 mm ++ Max. workpiece ring thickness 240mm ++) Max. workpiece width 470mm ++) - EXTERNAL gears M2 -with the smallest external Ø 950 mm -with the largest external Ø 2800 mm ADDITIONAL DATA Table load capacity max.: 40.000 kg Total power requirement: 40 kW Weight of the machine: approx. 50 t Dimensions of the machine: 7 x 4,5 x 4,75 m
            max. wheel diameter 2800 mm
            gear width - mm
            max. module 20/30
            Control Siemens 840 D
            total power requirement 40 kW
            weight of the machine ca. 50 t
            dimensions of the machine ca. 7 x 4,5 x 4,75 m
            Description :
            The machine has only a few working hours and is like new.

            - The price of the new machine of this caliber is €2.35 million
            - With minimal operating hours, the machine is essentially new.
            - It is one of Gleason's largest machines
            - It has the possibility of dry or wet milling; and internal and external
            gearing.
            - The machine underwent a comprehensive manufacturer's inspection in July
            2023 and is in impeccable working order.
            - Machine is currently partially assembled to allow potential buyers to
            verify all functionalities. If you wish to see the machine in operation, we
            have two identical machines running in our production facility, and you are
            welcome.


            CNC control Siemens 840 D
            Nominal workpiece diameter: 2800 mm
            Table diameter: 2500 mm
            Pitch wheel diameter: 2,200 mm
            Table bore diameter: 800 mm
            Table bore depth: 875 mm
            Machine nominal module
            Hobbing aprrox. 20 mm gear
            Milling approx.: 30 mm
            Smallest/largest distance between milling cutter and workpiece axis: 600/1,735
            mm
            Largest axial slide path – special design: 1,000 mm
            Largest champable hob diameter: 350 mm
            Largest champable hob length: 375 mm
            Swivel range of the milling head: + 30/- 45o
            cutter arbor cone: HSK-B160 (hollow shank taper according to DIN 69063)
            Largest milling cutter displacement path: 300 mm
            SIEMENS path control SINUMERIK 840 D with 5 axes and 1 spindle (basic
            configuration) as well
            as electronic gear (EG) and integrated safety functions.
            MOTOR MILLING HEADS
            - for INTERNAL gears: I1
            Millable nominal module in steel with a strength of around 600 N/mm2 approx.
            25mm+
            Cutter speed range 25 - 150 min-1
            Min./Max. Wheelbase 280/1,820 mm
            Min. workpiece inner diameter approx. 1,000 mm ++
            Max. workpiece ring thickness 240mm ++)
            Max. workpiece width 470mm ++)
            - EXTERNAL gears M2
            -with the smallest external Ø 950 mm
            -with the largest external Ø 2800 mm
            ADDITIONAL DATA
            Table load capacity max.: 40.000 kg
            Total power requirement: 40 kW
            Weight of the machine: approx. 50 t
            Dimensions of the machine: 7 x 4,5 x 4,75 m



        • Knops Werkzeugmaschinen
        • Konrad-Zuse-Straße 5
        • 40789 Monheim
        • Deutschland

        • Datasheet
          Request / Contact
          •   
          •   
          • 1  
          • 2  
          •   
          •