Bevel Gear Testing Machine
Machinelist: Bevel Gear Testing Machine
Bevel Gear Testing Machine
- HANS - JÜRGEN GEIGER
- James-Watt-Str. 12
- 72555 Metzingen
- Deutschland
-
(0049)-7123-18040
(0049)-7123-18384 -
geiger@geiger-germany.com
www.geiger-germany.com
#1049-385316 · Bevel Gear Testing Machine
GLEASON - 513 - - 1975 -
Technical details
G L E A S O N (USA) Hypoid Spiral Bevel Gear Running Testing Machine Model 513 TESTER, Year 1975, Serial No. 721607 This machine is very suitable for precision production testing of spiral and hypoid bevel gears with shaft angle 90°. The gear spindle is vertical and the pinion spindle is horizontal. The pinion cone distance can be adjusted while the machine is working in order to find the optimal mounting position whereby the gear is "loaded" with a preset torque. The axial pinion position can be adjusted until the quietest meshing position of the traction flank is found. Likewise, the thrust flank can be tested during the return run. Marking compound is sprayed on both sides of the teeth so the flank contact pattern can be seen. Working cycles, as well as the positioning in the tooth gap, are automatic. The gear quality can be assessed by recording the harmonic frequencies, which are displayed on a separate monitor and which can be analyzed with a RHF Control. Machine can be used for soft testing of production parts, as well as for mating sets of hardened gears and pinions prior to lapping, and for final testing after lapping to select the optimum pinion mounting distance. Also ideal for lab work, processing, and quality control. Max. gear outside diameter, approx. 508 mm Max. pinion outside diameter, approx. 254 mm Axial cross angle 90 ° Offset of pinion spindle above/below gear spindle, max. 102 mm Diameter of taper hole, pinion spindle 99/95 mm Diameter of taper hole, gear spindle 56/55 mm Speeds of pinion spindle, infinitely variable 0 - 1,250 rpm Speeds of gear spindle, infinitely variable 0 - 1,250 rpm Spindle drive, approx. 5 / 7.5 kW Total electrical load, approx. 15 kW - 380 V - 50 Hz Accessories / Special Features * Large display for 1 / 2 / 3 harmonies, display for pinion distance, pinion speed, as well of gear torque in kg/torque, etc. * Hydraulic workpiece clamping. * Hydraulic slide clamping. * Tank for marking compound with mixer and pump, separate. * Separate switch cabinet. * Separate hydraulic unit. * Lots of spare parts, spare motors, etc. Condition : Good. Machine can soon be inspected under power. Delivery : Ex stock, as inspected. Payment : Net, after conclusion of contract.
Trader Profile: Hans - Jürgen Geiger
Maschinen-Vertrieb GmbH
Contact Trader
Maschinen-Vertrieb GmbH
James-Watt-Str. 12
72555 - Metzingen
Deutschland
(0049)-7123-18040">(0049)-7123-18040
(0049)-7123-18384
geiger@geiger-germany.com
www.geiger-germany.com
Profile of Trader
SERVICES
We buy machines and production plants from all over the world. If you sell us your machines, you can be sure of prompt inspection, payment, transportation, etc.
AFTER-SALE SERVICE
Our management takes pains to provide every customer with expert before-sale consultation; and reliable after-sale service, also with regard to procurement of spare parts, etc. Clients are welcome to visit our warehouses at any time. Machines which are of interest can be inspected under power, after prior appointment.
TRANSPORTATION
We can arrange for reasonably priced transportation if required. All machines are rust-protected and properly packed before they leave our stock. Machines being sent to overseas destinations are usually sent in containers, and in this important area we have a lot of packing experience, so that machines are certain to arrive in good order.
ACCESSORIES AND SPARE PARTS
Our after-sale service includes helping you to procure accessories and spare parts for our machines in the future.
RECONDITIONING AND MODERNIZATION
We can also recommend companies who specialize in reconditioning and retrofitting, etc.
PRICE ESTIMATES
If you are selling your company, or your production machines, and need a price estimate, our Director, Hans-Jürgen Geiger, is a qualified authority (FDM and EAMTM) and will be happy to help you.
YOU ARE VERY WELCOME TO VISIT US | |
How to find our company if you are driving: Coming on the A81/A8 (direction munich), please take the exit to B27 direction Tuebingen/Reutlingen. After about 10 km take the branch of direction Metzingen and after another 10 km please take the 1.exit Metzingen (industrial area Laengenfeld), take a left at the first opportunity and take another left at the junction, after 150 m you find us on the right side in the James-Watt-street 12. | |
PDF-DOWNLOAD | |
Anfahrtsskizze im PDF-Format With free Adobe Acrobat Reader software, you can view and print PDF files. | |
Our company is located near to Stuttgart International Airport. We would be happy to pick you up from there. There is a railway station in Metzingen. A train schedule is available on the internet at www.bahn.de. We can pick you up from the station. Our office and showrooms are open from Monday to Friday, 0800 to 1800 hours. Other times by appointment only. We are closed for two weeks for the Christmas Holiday, from 21st December until 7th January. Metzingen is located in a very pretty area in the south of Germany. It is famous for its good wines and for its various factory outlets (including Hugo Boss and Escada). We can help you find a good hotel if you want to spend some time here. |
TOP Manufacturer:
KLINGELNBERG - OERLIKON - GLEASON -
James-Watt-Str. 12
Contact Trader
James-Watt-Str. 12
72555 - Metzingen
Deutschland
(0049)-7123-18040
(0049)-7123-18384
geiger@geiger-germany.com
www.geiger-germany.com
Contact person: