European network of stockholding machinery dealers

Bitte einen Suchbegriff eingeben - Please enter a search term
Category:
    Manufacturer:
      Machines:
        Trader:

          Frech GmbH - Stockist for used machines

          Machinelist:


          Punching Press

          used  Punching Press PEDDINGHAUS HYDRAULIK 500


          • Frech GmbH
          • Werderstr. 82
          • 74889 Sinsheim
          • Deutschland

          • 0049-7261-1011
            0049-7261-63966
          • info@frech-maschinen.de
            www.frech-maschinen.de
          #1073-34177 · Punching Press

          PEDDINGHAUS - HYDRAULIK 500 - - -

          Technical details
          pressure 050 t︱punching cross-cut in cmm 31 in 12 mm︱stroke max. 32,0 mm︱column arm 510 mm︱work height max. 1070 mm︱stroke - stepless adjustable 10 - 32 mm︱no. of strokes max. 45 Hub/min︱oil volume 45,0 l︱total power requirement 4,0 kW︱weight of the machine ca. 1120 kg.︱range L-W-H 1118 x 650 x 1680 mm︱
          ** good condition (!!) ** from a maintenance workshop Furnishing: - hydraulic punch, with large overhang - Sheet metal wipers with wiper plates - stepless stroke adjustment - Various application tools - Die base - free-moving footswitch - Operation manual
            pressure 050 t
            punching cross-cut in cmm 31 in 12 mm
            stroke max. 32,0 mm
            column arm 510 mm
            work height max. 1070 mm
            stroke - stepless adjustable 10 - 32 mm
            no. of strokes max. 45 Hub/min
            oil volume 45,0 l
            total power requirement 4,0 kW
            weight of the machine ca. 1120 kg.
            range L-W-H 1118 x 650 x 1680 mm
            Description :
            ** good condition (!!)
            ** from a maintenance workshop

            Furnishing:
            - hydraulic punch, with large overhang
            - Sheet metal wipers with wiper plates
            - stepless stroke adjustment
            - Various application tools
            - Die base
            - free-moving footswitch
            - Operation manual
          Datasheet
          Request / Contact

          Section Steel Shear

          used  Section Steel Shear PEDDINGHAUS Peddimax 801


          • Frech GmbH
          • Werderstr. 82
          • 74889 Sinsheim
          • Deutschland

          • 0049-7261-1011
            0049-7261-63966
          • info@frech-maschinen.de
            www.frech-maschinen.de
          #1073-34179 · Section Steel Shear

          PEDDINGHAUS - Peddimax 801 - - -

          Technical details
          pressure 080 t︱punching cross-cut in cmm 31,0 in 25 mm︱shear: flat material 500x18 / 300x22 mm︱L-beam 150 x 12 mm︱round bar steel 50 + 25 mm︱square edge steel 50 + 30 mm︱throat 510 mm︱blade length 500 mm︱work height max. ca. 1.100 mm︱total power requirement 7,5 kW︱weight of the machine ca. 3200 kg︱dimensions of the machine ca. 2000 x 1000 x 2100 mm︱
          ** from a maintenance workshop Furnishing: - Robust electro-hydraulic combined profile steel shears - Notcher, hole punch, bar steel knife, profile knife and tin snips - Stop table at the hole punch, with blank holder - Stop table at the notcher - 2x floating footswitches - Stroke adjustment for fast stroke sequence - 1x PEDDINGHAUS contact length stop: 1.000 mm - Safety devices - Operating instructions in German
            pressure 080 t
            punching cross-cut in cmm 31,0 in 25 mm
            shear: flat material 500x18 / 300x22 mm
            L-beam 150 x 12 mm
            round bar steel 50 + 25 mm
            square edge steel 50 + 30 mm
            throat 510 mm
            blade length 500 mm
            work height max. ca. 1.100 mm
            total power requirement 7,5 kW
            weight of the machine ca. 3200 kg
            dimensions of the machine ca. 2000 x 1000 x 2100 mm
            Description :
            ** from a maintenance workshop

            Furnishing:
            - Robust electro-hydraulic combined profile steel shears
            - Notcher, hole punch, bar steel knife, profile knife and tin snips
            - Stop table at the hole punch, with blank holder
            - Stop table at the notcher
            - 2x floating footswitches
            - Stroke adjustment for fast stroke sequence
            - 1x PEDDINGHAUS contact length stop: 1.000 mm
            - Safety devices
            - Operating instructions in German
          Datasheet
          Request / Contact
          used  Section Steel Shear PEDDINGHAUS PEDDIMASTER 80/110


          • Frech GmbH
          • Werderstr. 82
          • 74889 Sinsheim
          • Deutschland

          • 0049-7261-1011
            0049-7261-63966
          • info@frech-maschinen.de
            www.frech-maschinen.de
          #1073-34154 · Section Steel Shear

          PEDDINGHAUS - PEDDIMASTER 80/110 - - -

          Technical details
          pressure 080-110 t︱punching cross-cut in cmm 27,0 in 20 mm︱L-beam 120 x 13 mm︱L-beam T 120 x 12 mm︱shear: flat material 500x18 / 400x19 mm︱throat 510 mm︱work height max. 1050 mm︱total power requirement 6,5 kW︱weight 1650 kg︱range L-W-H 1750 x 850 x 1850 mm︱
          ** very good condition (!!) Furnishing: - hydraulic, combined profile steel shears * with release station * with punching station .. punching capacity 800kN * Flat steel shears .. Shear capacity 100kN * Angle steel scissors * Angle steel knife for cutting 90 ° & 45 ° miters * Cutting angle steel + T-steel + I-steel - Support table at the notching station - Scraper at the punching station - Freely movable foot switch - Central lubrication - Safety devices - Operating instructions (PDF)
            pressure 080-110 t
            punching cross-cut in cmm 27,0 in 20 mm
            L-beam 120 x 13 mm
            L-beam T 120 x 12 mm
            shear: flat material 500x18 / 400x19 mm
            throat 510 mm
            work height max. 1050 mm
            total power requirement 6,5 kW
            weight 1650 kg
            range L-W-H 1750 x 850 x 1850 mm
            Description :
            ** very good condition (!!)

            Furnishing:
            - hydraulic, combined profile steel shears
            * with release station
            * with punching station .. punching capacity 800kN
            * Flat steel shears .. Shear capacity 100kN
            * Angle steel scissors
            * Angle steel knife for cutting 90 ° & 45 ° miters
            * Cutting angle steel + T-steel + I-steel
            - Support table at the notching station
            - Scraper at the punching station
            - Freely movable foot switch
            - Central lubrication
            - Safety devices
            - Operating instructions (PDF)
          Datasheet
          Request / Contact
          •   
          •   
          • 1  
          •   
          •   

            Trader Profile:   Frech GmbH

          Contact Trader



            Frech GmbH
           Werderstr. 82
            74889 - Sinsheim
            Deutschland
            0049-7261-1011">0049-7261-1011
            0049-7261-63966
            info@frech-maschinen.de
            www.frech-maschinen.de

          Profile of Trader

          Founded in 1945 by Karl Frech and having Mrs Nicole Frech as its 3rd generation manager, the company can look back on over 60 years of business tradition in the town of Sinsheim near Heidelberg in the German Baden region. 

          Sinsheim is located on the A6 motorway, at a distance of an one hour drive on the motorway from the airports Frankfurt/Main and Stuttgart. FRECH GmbH is specialised in dealing with used equipment (decoilers, recoilers, roller levellers, coil-lines, roll forming lines, slitting lines, cut-to-length lines, cold rolling mills and roll grinders). 

          Furthermore the FRECH-Team is acting as an agent in the following fields of used machinery: coil-cars, folding machines, grinding machines, press brakes, presses, scrap-metal-coilers and shears. Contact us please !!! - we will help you also in other areas. In an area of about 1000 square metres of halls and retail floorspace we display a range of constantly varying second-hand machinery which are in proper working condition and, for the most part, fit for demonstration. 

          Why second-hand machinery? 

          Second-hand machines are most of the time immediately available and are ready for operation. Frech is your first address when you want to reduce your capital costs and increase your machinery’s economic efficiency. 

          Buying and selling second-hand machinery is a matter of trust – Frech is your best contact

          OUR CONTACTS




          Frech GmbH   74889 - Sinsheim Werderstr. 82 Deutschland
          Frech GmbH

          Werderstr. 82



          Contact Trader


            Frech GmbH
           Werderstr. 82
            74889 - Sinsheim
            Deutschland
            0049-7261-1011
            0049-7261-63966
            info@frech-maschinen.de
            www.frech-maschinen.de
            Contact person:

           




          Machine category


          Abkantpresse - hydraulisch · Abwickelhaspel · Abwickelhaspel - Doppel · Blechbiegemaschine - 3 Walzen · Blechbiegemaschine - 4 Walzen · Coilanlage · Lochstanze · Längsteilanlage · Profilstahlschere · Querteilanlage · Richtmaschine · Schwenkbiegemaschine · Tafelschere - hydraulisch · Tafelschere - mechanisch ·