Kirchgeorg Werkzeugmaschinen GmbH - Stockist for used machines

Machinelist:

Lathe - cycle-controlled

Kirchgeorg Werkzeugmaschinen
Frankfurter Straße 141
63303 Dreieich-Sprendlingen
Deutschland

0049-(0)-6103-9909-0
0049-(0)-6103-9909-50
info@kirchgeorg.de
www.kirchgeorg.de

#1072-20401 · Lathe - cycle-controlled

WAGNER - WDE 500 - - 2010 - Sinumerik

Technical details

centre height 250 mm︱centre distance 1500 mm︱turning diameter over bed 500 mm︱turning diameter over slide 280 mm︱turning length 1500 mm︱spindle taper D8 ︱control Sinumerik ︱bed width 390 mm︱spindle bore 82 mm︱turning speed range 45-2000 U/min︱rapid travel - longitudinal/face 8/4 m/min︱3-jaw-chuck diameter 250 mm︱quick change toolholder System Multifix ︱drive capacity - spindle motor 6,5 kW︱taper in tailstock-quill MK 5 ︱dia. of quill 75 mm︱quill stroke 150 mm︱coolant 3,0 ︱voltage 400 V︱total power requirement 24 kVA︱

- Serial-No. G01262 - Control: Sinumerik 802 C

centre height 250 mm

centre distance 1500 mm

turning diameter over bed 500 mm

turning diameter over slide 280 mm

turning length 1500 mm

spindle taper D8

control Sinumerik

bed width 390 mm

spindle bore 82 mm

turning speed range 45-2000 U/min

rapid travel - longitudinal/face 8/4 m/min

3-jaw-chuck diameter 250 mm

quick change toolholder System Multifix

drive capacity - spindle motor 6,5 kW

taper in tailstock-quill MK 5

dia. of quill 75 mm

quill stroke 150 mm

coolant 3,0

voltage 400 V

total power requirement 24 kVA

Description :

- Serial-No. G01262
- Control: Sinumerik 802 C

Datasheet

Pipe-Bending Machine

Kirchgeorg Werkzeugmaschinen
Frankfurter Straße 141
63303 Dreieich-Sprendlingen
Deutschland

0049-(0)-6103-9909-0
0049-(0)-6103-9909-50
info@kirchgeorg.de
www.kirchgeorg.de

#1072-20478 · Pipe-Bending Machine

WAGNER - WDB 51 M - - 2012 -

Technical details

tube diameter 51 mm︱wall strength 3 mm︱semi-automatic operated UZMA ︱bending radius max. 225 mm︱bending angle max. 190 °︱bending speed 35 ° / sec.︱mandrel length 3.100 mm︱engine output 5,5 kW︱voltage 380 V︱total power requirement 11,0 kW︱weight of the machine ca. 1,36 t︱dimensions of the machine ca. 4,20 x 1,60 x 1,20 m︱

- Serial No.: 0144 - semi-automatic mandrel bending machine - bending angle is program controlled - length + twisting angle manually adjustable - digital display for twisting angle, length and bending angle - the following bending sets are included: 1.) R75 mm / Ø 20 mm 2.) R60 mm / Ø 25 mm 3.) R75 mm / Ø 30 mm 4.) R75 mm / Ø 40 mm 5.) R170 mm / Ø 50 mm 6.) R35 / flat Material 40 x 10 mm

tube diameter 51 mm

wall strength 3 mm

semi-automatic operated UZMA

bending radius max. 225 mm

bending angle max. 190 °

bending speed 35 ° / sec.

mandrel length 3.100 mm

engine output 5,5 kW

voltage 380 V

total power requirement 11,0 kW

weight of the machine ca. 1,36 t

dimensions of the machine ca. 4,20 x 1,60 x 1,20 m

Description :

- Serial No.: 0144
- semi-automatic mandrel bending machine
- bending angle is program controlled
- length + twisting angle manually adjustable
- digital display for twisting angle,
length and bending angle
- the following bending sets are included:
1.) R75 mm / Ø 20 mm
2.) R60 mm / Ø 25 mm
3.) R75 mm / Ø 30 mm
4.) R75 mm / Ø 40 mm
5.) R170 mm / Ø 50 mm
6.) R35 / flat Material 40 x 10 mm

Datasheet

Trader Profile: Kirchgeorg Werkzeugmaschinen
GmbH

Contact Trader

Kirchgeorg Werkzeugmaschinen
GmbH

Frankfurter Straße 141
63303 - Dreieich-Sprendlingen
Deutschland
0049-(0)-6103-9909-0">0049-(0)-6103-9909-0
0049-(0)-6103-9909-50
info@kirchgeorg.de
www.kirchgeorg.de

Profile of Trader

About us

One of the oldest family-run new and used machine tool dealerships in Germany, Kirchgeorg Werkzeugmaschinen GmbH was founded in 1919 in Erfurt, Thuringia by Engineer Paul Kirchgeorg.

Kirchgeorg began as a representative and dealer for metal and wood working machinery, and quickly grew the company into a full service heavy equipment overhauler and used machine tools and equipment dealership.

In 1953, as a result of expropriation attempts by the East German government, Kirchgeorg relocated the company to Fulda, Hesse in West Germany. In 1953 and 1960 he was joined by his sons, Harro and Reiner respectively, and the company entered another expansion phase.

In 1960, the first buildings were contructed at our present location in Dreieich and have since grown to include a 3,000+ square meter display floor.

With Thomas Kirchgeorg, Industrial Engineer, joining the company in 2003, we are pleased to say that our family-owned business is in its third generation.

Today, we offer more than 600 new and used machine tools on display in Dreieich. In addition to worldwide distribution, we offer individualized, expert advice and complete service. We can also assist you with obtaining financing, transportation, installation and instruction.

In our production facilities, all used machines are fully reconditioned, thoroughly tested and come with a guarantee. We also manufacture replacement parts, gears, gear racks and other actuation modules.

Our subsidiary, NASSOVIA Maschinenservice GmbH, has been providing authorized service for Schiess-Nassovia Cavity Sinking EDM machines since 1992.

We are member of the German Association of Machine and Machine Tool Wholesalers (FDM).

Contact: Company

We are more than happy to assist you with any questions. We look forward to hearing from you.
Management	Phone
Thomas Kirchgeorg	+49 (6103) 9909-23
Sales	Phone
Norbert Dick	+49 (6103) 9909-14
Production sales management	Phone
Matthias Goy	+49 (6103) 9909-27
Production techn. management	Phone
Gerd Brandt	+49 (6103) 9909-17
Accounting	Phone
Maria Kelbler	+49 (6103) 9909-18
Reception	Phone
André Milbradt	+49 (6103) 9909-0
Webmaster
Thomas Kirchgeorg
NASSOVIA Maschinenservice GmbH	Phone
Hans Becker	+49 (6103) 322693

KIRCHGEORG
Werkzeugmaschinen GmbH
Frankfurter Strasse 141
D-63303 Dreieich

Phone +49 (6103) 9909-0
Fax +49 (6103) 9909-50
E-Mail info@kirchgeorg.de

Business Hours:
Mon-Thu 7.30-16.30 CET
Friday 7.30-15.30 CET

Kirchgeorg Werkzeugmaschinen GmbH

Frankfurter Straße 141

Contact Trader

Kirchgeorg Werkzeugmaschinen GmbH
Frankfurter Straße 141
63303 - Dreieich-Sprendlingen
Deutschland
0049-(0)-6103-9909-0
0049-(0)-6103-9909-50
info@kirchgeorg.de
www.kirchgeorg.de
Contact person:
Sehr geehrter Herr Thomas Kirchgeorg 0049-(0)-6103-9909-23
Sehr geehrter Herr Norbert Dick 0049-(0)-6103-9909-14

Trader Profile

Machine category

Abkantpresse - hydraulisch · Anreißplatte · Aufspannwinkel · Ausdrehkopf · Ausklinkmaschine · Auswuchtmaschine · Bandschleifmaschine · Bandsäge - horizontal · Bandsäge - Vertikal · Bandsägeautomat - Horizontal · Bearbeitungszentrum - Universal · Bearbeitungszentrum - Vertikal · Bettfräsmaschine - Universal · Bohr- und Fräsmaschine · Bohrautomat · Bohrerschleifmaschine · Bügelsäge · CNC Dreh- und Fräszentrum · CNC Drehmaschine - Schrägbettmaschine · Doppel-Gehrungsäge · Dornrohrbiegemaschine · Drahterodiermaschine · Dreh-,Schwenk-, und Kipptisch · Drehmaschine - zyklengesteuert · Eckverbindungsmaschinen · Exzenterpresse - Einständer · Flachschleifmaschine - Horizontal · Fräsmaschine - Universal · Futter · Gewindeschneidmaschine · Gleitschleifanlage · Handhebel-Schere · Hebegeräte · Hydraulische - Tafelschere · Hydraulische Presse · Härteofen · Kaltkreissäge · Kolbenkompressor · Koordinatenmeßmaschine · Koordinatenschleifmaschine · Leit- und Zugspindeldrehmaschine · Lötanlage · Magnetspannplatte · Mechanikerdrehbank · Nutenziehmaschine · Planscheibe · Plasmaschneidegerät · Profil- Ring- Biegemaschine · Profilprojektor · Radialbohrmaschine · Richtplatte · Rohrbiegemaschine · Rollenbahn · Rundschleifmaschine - Außen · Rundschleifmaschine - Spitzenlos · Rundschleifmaschine - Universal · Rundtisch · Räummaschine - Innen - Vertikal · Sandstrahlanlage · Schleifbock · Schraubenkompressor · Schraubstock · Schutzgasschweißanlage · Schweißdrehtisch · Schweißrauchabsaugung · Schwenkbiegemaschine · Senkerodiermaschine · Stangenlader · Staubabsaugung · Stoßmaschine - Vertikal · Stähleschleifmaschine · Säulenbohrmaschine · Tafelschere - mechanisch · Teilapparat · Tischbohrmaschine · Tischbohrwerk · Topfschleifmaschine · Tuschierpresse · Werkbank · Werkzeug Voreinstellgerät · Werkzeugfräsmaschine - Universal · Würfeltisch · Zahnrad-Abwälzfräsmaschine - vertikal · Zahnstangenfräser · Zahnstangenfräsmaschine · Zentrifuge · Zentrumschleifmaschine · Zubehör/Sonstiges ·

Kirchgeorg Werkzeugmaschinen GmbH - Stockist for used machines

Machinelist:

Lathe - cycle-controlled

#1072-20401 · Lathe - cycle-controlled

WAGNER - WDE 500 - - 2010 - Sinumerik

Technical details

Description :

Pipe-Bending Machine

#1072-20478 · Pipe-Bending Machine

WAGNER - WDB 51 M - - 2012 -

Technical details

Description :

Trader Profile: Kirchgeorg WerkzeugmaschinenGmbH

Contact Trader

Profile of Trader

About us

Contact: Company

Contact Trader

Trader Profile

Machine category

Trader Profile: Kirchgeorg Werkzeugmaschinen
GmbH