European network of stockholding machinery dealers

Bitte einen Suchbegriff eingeben - Please enter a search term
Category:
    Manufacturer:
      Machines:
        Trader:

          Bema Werkzeugmaschinen - Stockist for used machines

          Machinelist:


          Cylindrical Grinding Machine

          used  Cylindrical Grinding Machine STUDER S40


          • Bema Werkzeugmaschinen
          • Hegelstr. 28
          • 73230 Kirchheim
          • Deutschland

          • +49 702171799
            +49 7021978711
          • bema@gebrauchtmaschine.de
            www.gebrauchtmaschine.de
          #1056-P95 · Cylindrical Grinding Machine

          STUDER - S40 - - 2001 -

          Technical details
          grinding diameter 350 mm︱grinding length 1000 mm︱centre height 175 mm︱Control ︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱
          Data are from the time of delivery and therefore without guarantee. -B-axis 1° B-axis high-precision additional -C-axis standard with form grinding cycles -T1 500mm grinding wheel diameter -T5 500mm grinding wheel diameter -Tx 300mm grinding wheel diameter -longitudinal positioning touch probe Movomatic C25 -tailstock with fine adjustment -Paper belt filter with magnetic separator Machine has been serviced by ex Studer mechanic. All hydraulic lines to the grinding head replaced Top table regrinded Tailstock seals and wear parts replaced Work headstock seals and wear parts replaced Table geometry produced
            grinding diameter 350 mm
            grinding length 1000 mm
            centre height 175 mm
            Description :
            Data are from the time of delivery and therefore without guarantee.

            -B-axis 1°
            B-axis high-precision additional
            -C-axis standard with form grinding cycles
            -T1 500mm grinding wheel diameter
            -T5 500mm grinding wheel diameter
            -Tx 300mm grinding wheel diameter
            -longitudinal positioning touch probe Movomatic C25
            -tailstock with fine adjustment
            -Paper belt filter with magnetic separator

            Machine has been serviced by ex Studer mechanic.
            All hydraulic lines to the grinding head replaced
            Top table regrinded
            Tailstock seals and wear parts replaced
            Work headstock seals and wear parts replaced
            Table geometry produced

          Datasheet
          Request / Contact

          Cylindrical Grinding Machine - Universal

          used  Cylindrical Grinding Machine - Universal STUDER S33


          • Bema Werkzeugmaschinen
          • Hegelstr. 28
          • 73230 Kirchheim
          • Deutschland

          • +49 702171799
            +49 7021978711
          • bema@gebrauchtmaschine.de
            www.gebrauchtmaschine.de
          #1056-8282 · Cylindrical Grinding Machine - Universal

          STUDER - S33 - - 2010 -

          Technical details
          grinding diameter 350 mm︱grinding length 650 mm︱centre height 175 mm︱Control ︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱
          Machine in very good condition run in one shift (20,000 switch-on hours). Available from January 2024 Fanuc 0i-TD control system Centre distance 650mm Centre height 175mm Workpiece table swivelling +8.5° with fine adjustment and pneumatic lift-off Cross axis X travel 285mm Feed rate 0.001-10,000mm/min Direct, linear absolute measuring system, resolution 0.0001mm Longitudinal axis Z Travel 800mm Feed rate 0.001-20,000mm/min Direct, linear absolute measuring system, resolution 0.0001mm H1 wheelhead with B-axis and 1° Hirth serration Three tool positions Swivelling range -15 to +225° Pos T2 - External grinding with grinding discs Ø500x80x203mm Motor spindle with internal cooling 7.5-11kW, 3,200rpm_max, v_max = 50m/s Cone 1:10, nominal Ø 63mm Pos T2 - External grinding 30° with grinding discs Ø500x80x203mm Motor spindle with internal cooling 7.5-11kW, 3,200rpm_max, v_max = 50m/s Cone 1:10, nominal Ø 63mm Swivelling measuring probe Pos T3 - Internal grinding unit with high frequency grinding spindle Ø120mm Motor spindle Fischer MFM 24'-42'000 rpm, 15kW, mounting HJND 21 with oil-air lubrication and water cooling Dressing device, not controlled, movable in X, with dressing tool holder for 2 dressing tools MK1, height-adjustable Workpiece headstock, mounting cone MK4 Spindle nose Ø 70mm, spindle passage Ø 26mm Manual spindle locking, without monitoring C-axis, accuracy +/- 0.5° Workpiece drive 3kW, speed 1-1,500 rpm Pneumatic lifting Equipment: Dittel S6000 electronic grinding detection system with gauging sensors on both table and headstock Accessories: 2-circuit hydraulics 3nine sanding mist extraction system Automatic paper belt filter Flow feed, pumps and tank 375 litres Water cooling circuit 100 litres for sanding drives Documentation
            grinding diameter 350 mm
            grinding length 650 mm
            centre height 175 mm
            Description :
            Machine in very good condition
            run in one shift (20,000 switch-on hours).

            Available from January 2024

            Fanuc 0i-TD control system


            Centre distance 650mm
            Centre height 175mm
            Workpiece table swivelling +8.5° with fine adjustment and pneumatic lift-off

            Cross axis X travel 285mm
            Feed rate 0.001-10,000mm/min
            Direct, linear absolute measuring system, resolution 0.0001mm

            Longitudinal axis Z Travel 800mm
            Feed rate 0.001-20,000mm/min
            Direct, linear absolute measuring system, resolution 0.0001mm

            H1 wheelhead with B-axis and 1° Hirth serration
            Three tool positions
            Swivelling range -15 to +225°

            Pos T2 - External grinding with grinding discs Ø500x80x203mm
            Motor spindle with internal cooling 7.5-11kW, 3,200rpm_max, v_max = 50m/s
            Cone 1:10, nominal Ø 63mm

            Pos T2 - External grinding 30° with grinding discs Ø500x80x203mm
            Motor spindle with internal cooling 7.5-11kW, 3,200rpm_max, v_max = 50m/s
            Cone 1:10, nominal Ø 63mm
            Swivelling measuring probe

            Pos T3 - Internal grinding unit with high frequency grinding spindle Ø120mm
            Motor spindle Fischer MFM 24'-42'000 rpm, 15kW, mounting HJND 21
            with oil-air lubrication and water cooling

            Dressing device, not controlled, movable in X,
            with dressing tool holder for 2 dressing tools MK1, height-adjustable

            Workpiece headstock, mounting cone MK4
            Spindle nose Ø 70mm, spindle passage Ø 26mm
            Manual spindle locking, without monitoring
            C-axis, accuracy +/- 0.5°
            Workpiece drive 3kW, speed 1-1,500 rpm
            Pneumatic lifting


            Equipment:
            Dittel S6000 electronic grinding detection system
            with gauging sensors on both table and headstock


            Accessories:
            2-circuit hydraulics
            3nine sanding mist extraction system
            Automatic paper belt filter Flow feed, pumps and tank 375 litres
            Water cooling circuit 100 litres for sanding drives
            Documentation

          Datasheet
          Request / Contact
          used  Cylindrical Grinding Machine - Universal STUDER S20-2


          • Bema Werkzeugmaschinen
          • Hegelstr. 28
          • 73230 Kirchheim
          • Deutschland

          • +49 702171799
            +49 7021978711
          • bema@gebrauchtmaschine.de
            www.gebrauchtmaschine.de
          #1056-P89 · Cylindrical Grinding Machine - Universal

          STUDER - S20-2 - - 1987 -

          Technical details
          grinding diameter 200 mm︱grinding length 400 mm︱centre height 100 mm︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱
            grinding diameter 200 mm
            grinding length 400 mm
            centre height 100 mm
          Datasheet
          Request / Contact
          used  Cylindrical Grinding Machine - Universal STUDER S30-1


          • Bema Werkzeugmaschinen
          • Hegelstr. 28
          • 73230 Kirchheim
          • Deutschland

          • +49 702171799
            +49 7021978711
          • bema@gebrauchtmaschine.de
            www.gebrauchtmaschine.de
          #1056-8254K · Cylindrical Grinding Machine - Universal

          STUDER - S30-1 - - 1987 -

          Technical details
          grinding diameter 350 mm︱grinding length 650 mm︱centre height 175 mm︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱
          - Well-maintained cylindrical grinding machine for internal and external cylindrical grinding - 7072 operating hours - Retrofitted in 2013 with a cooling lubricant belt filter system, capacity 300 L, manufacturer Knoll. - Including machine accessories, e.g. holders, flanges, collet chuck set, etc. - The machine has been serviced regularly, technically and visually in good condition - ready for use!
            grinding diameter 350 mm
            grinding length 650 mm
            centre height 175 mm
            Description :
            - Well-maintained cylindrical grinding machine for internal and external
            cylindrical grinding
            - 7072 operating hours
            - Retrofitted in 2013 with a cooling lubricant belt filter system, capacity 300
            L, manufacturer Knoll.
            - Including machine accessories, e.g. holders, flanges, collet chuck set, etc.
            - The machine has been serviced regularly, technically and visually in good
            condition - ready for use!
          Datasheet
          Request / Contact
          •   
          •   
          • 1  
          •   
          •   

            Trader Profile:   Bema Werkzeugmaschinen

          Contact Trader



            Bema Werkzeugmaschinen
           Hegelstr. 28
            73230 - Kirchheim
            Deutschland
            +49 702171799">+49 702171799
            +49 7021978711
            bema@gebrauchtmaschine.de
            www.gebrauchtmaschine.de

          Profile of Trader

          BEMA Werkzeugmaschinen was founded in 1990. The quality of our products and customer proximity is the focus of our business philosophy. With over two decades of experience in the machine tool trade, we supply our customers worldwide with honing machines and cylindrical grinding machines.

          On 2000 square meters we can present you an extensive assortment of machine tools, especially cylindrical grinding machines and honing machines.

          BEMA Werkzeugmaschinen
          Hegelstr. 28
          73230 Kirchheim unter Teck




          Bema Werkzeugmaschinen   73230 - Kirchheim Hegelstr. 28 Deutschland
          Bema Werkzeugmaschinen

          Hegelstr. 28



          Contact Trader


            Bema Werkzeugmaschinen
           Hegelstr. 28
            73230 - Kirchheim
            Deutschland
            +49 702171799
            +49 7021978711
            bema@gebrauchtmaschine.de
            www.gebrauchtmaschine.de
            Contact person:

           




          Machine category


          · Bearbeitungszentrum - Horizontal · Bearbeitungszentrum - Vertikal · CNC Dreh- und Fräszentrum · CNC Drehmaschine - Schrägbettmaschine · Drehmaschine-konventionell-elektronisch · Ersatzteile · Flachschleifmaschine - Horizontal · Fräsmaschine - Universal · Futter · Honmaschine - handbetätigt · Honmaschine - Innen - Horizontal · Honmaschine - Innen - Vertikal · Innenschleifmaschine · Koordinatenbohrwerk - Zweiständer · Lehrenbohrwerk - Horizontal · Lehrenbohrwerk - Vertikal · Messmaschine · Messplatte · Ofen · Profilprojektor · Roboter - Handling · Rundschleifmaschine · Rundschleifmaschine - Außen · Rundschleifmaschine - Einstich · Rundschleifmaschine - Universal · Rundtischflächenschleifmaschine - Horiz. · Schleif- und Läppmaschine · Schleifscheibenflansch · Sonstige Geräte und Zubehör · Sonstiges · Spitzenlose - Rundschleifmaschine ·