‚
European network of stockholding machinery dealers
+49 (0) 2389 5299080
Search service Sell used machines

Bitte einen Suchbegriff eingeben - Please enter a search term
Category:
    Manufacturer:
      Machines:
        Trader:
             View: 

              Search: 



          Showoffers:
          Build year From:
          1950
          Build year To:
          2022

          Karl Günter Wirths GmbH - Stockist for used machines

          Machinelist:

          Center Lathe

          used Center Lathe VDF- BOEHRINGER D 480

          • Karl Günter Wirths GmbH
          • Scharpenberger Strasse 96-98
          • 58256 Ennepetal
          • Deutschland
          • 02333-79050
            02333-790555
          • sales@wirths.net
            www.wirths.net
          #1041-2000150 · Center Lathe

          VDF- BOEHRINGER - D 480 - - 1979 -

          Technical details
          turning diameter over bed 0480 mm︱turning diameter over slide rest 350 mm︱turning length 1000 mm︱spindle bore 65 mm︱spindle turning speed range 22 - 2200 U/min︱spindle drive 15 kW︱feeds 0,05 - 20 mm/U︱face slide travel 240 mm︱ 110 mm︱bed width 400 mm︱tailstock quill diameter 75 mm︱tailstock quill stroke 200 mm︱tailstock taper MT 5 ︱total power requirement 18 kW︱weight of the machine ca. 4,2 t︱dimensions of the machine ca. 3,5 x 2,2 x 1,7 m︱
          - with rapid feed in carriage - Accessories: MULTIFIX-tool post with various inserts, 3 jaw chuck and DRO.
            turning diameter over bed 0480 mm
            turning diameter over slide rest 350 mm
            turning length 1000 mm
            spindle bore 65 mm
            spindle turning speed range 22 - 2200 U/min
            spindle drive 15 kW
            feeds 0,05 - 20 mm/U
            face slide travel 240 mm
            110 mm
            bed width 400 mm
            tailstock quill diameter 75 mm
            tailstock quill stroke 200 mm
            tailstock taper MT 5
            total power requirement 18 kW
            weight of the machine ca. 4,2 t
            dimensions of the machine ca. 3,5 x 2,2 x 1,7 m
            Description :
            - with rapid feed in carriage -

            Accessories: MULTIFIX-tool post with various inserts, 3 jaw chuck and DRO.

          Datasheet
          Request / Contact

          CNC Lathe

          used CNC Lathe GILDEMEISTER CTX 310

          • Karl Günter Wirths GmbH
          • Scharpenberger Strasse 96-98
          • 58256 Ennepetal
          • Deutschland
          • 02333-79050
            02333-790555
          • sales@wirths.net
            www.wirths.net
          #1041-203442 · CNC Lathe

          GILDEMEISTER - CTX 310 - - 2006 - 840 D Siemens

          Technical details
          turning diameter 0260 mm︱turning length 580 mm︱control 840 D Siemens︱centre height 190 mm︱turning diameter over bed 500 mm︱turning dia. over face-slide 365 mm︱Main spindle: ︱turning speed range - main spindle max. 6.000 min/-1︱power capacity - main spindel 10 / 7,5 kW︱max. Torque 115 / 86 Nm︱spindle diameter in front bearing 100 mm︱spindle bore 68,5 mm︱usable bar diameter 52 mm︱chucking diameter 210 mm︱axis stroke: ︱travel -x axis 185 mm︱travel -z axis 580 mm︱turret: ︱number of toolpositions 12 pos.︱tool taper VDI 30 ︱
          CNC - Lathe with sub spindle. Control Siemens 840 D. Machine has Y- axe and live tooling. We supply an IEMCA Kid 70 bar loader along with the machine.
            turning diameter 0260 mm
            turning length 580 mm
            control 840 D Siemens
            centre height 190 mm
            turning diameter over bed 500 mm
            turning dia. over face-slide 365 mm
            turning speed range - main spind. max. 6.000 min/-1
            power capacity - main spindel 10 / 7,5 kW
            max. Torque 115 / 86 Nm
            spindle diameter in front bearin. 100 mm
            spindle bore 68,5 mm
            usable bar diameter 52 mm
            chucking diameter 210 mm
            travel -x axis 185 mm
            travel -z axis 580 mm
            number of toolpositions 12 pos.
            tool taper VDI 30
            Description :
            CNC - Lathe with sub spindle. Control Siemens 840 D. Machine has Y- axe and
            live tooling. We supply an IEMCA Kid 70 bar loader along with the machine.
          Datasheet
          Request / Contact
          used CNC Lathe DAEWOO/DOOSAN Puma TT 1800 SY

          • Karl Günter Wirths GmbH
          • Scharpenberger Strasse 96-98
          • 58256 Ennepetal
          • Deutschland
          • 02333-79050
            02333-790555
          • sales@wirths.net
            www.wirths.net
          #1041-203445 · CNC Lathe

          DAEWOO/DOOSAN - Puma TT 1800 SY - - 2005 - 18 i Fanuc

          Technical details
          turning diameter over bed 0520 mm︱turning length 770 mm︱control 18 i Fanuc︱turning diameter over bed slide 230 mm︱spindle turning speed - stepless 45- 5000 U/min- rpm︱spindle bore 65 mm︱feeds 0-30 m/min︱rapid power traverse in X-and Z direction 30 m/min︱voltage 400 V︱connected load 30 KVA︱face slide travel 190 mm︱longitudinal travel 720 mm︱dimensions of the machine ca. 3,2 x 2 x 2,3 m︱toolpiece turning speed range 0- 5000 U/min︱work piece power 5,5 kW︱main drive motor 15/22 kW︱weight of the machine ca. 5,6 t︱y-axis 100 (+/- 50) mm︱c-axis 360 x 0,001 °︱
          Has two 12 position turret heads with live tooling (C- axe), one with Y axe, sub spindle, power chuck, cooling arrangement and chip conveyor. Control: Fanuc 18 i. With many accessories.
            turning diameter over bed 0520 mm
            turning length 770 mm
            control 18 i Fanuc
            turning diameter over bed slide 230 mm
            spindle turning speed - stepless 45- 5000 U/min- rpm
            spindle bore 65 mm
            feeds 0-30 m/min
            rapid power traverse in X-and Z . 30 m/min
            voltage 400 V
            connected load 30 KVA
            face slide travel 190 mm
            longitudinal travel 720 mm
            dimensions of the machine ca. 3,2 x 2 x 2,3 m
            toolpiece turning speed range 0- 5000 U/min
            work piece power 5,5 kW
            main drive motor 15/22 kW
            weight of the machine ca. 5,6 t
            y-axis 100 (+/- 50) mm
            c-axis 360 x 0,001 °
            Description :
            Has two 12 position turret heads with live tooling (C- axe), one with Y axe,
            sub spindle, power chuck, cooling arrangement and chip conveyor.
            Control: Fanuc 18 i. With many accessories.
          Datasheet
          Request / Contact
          used CNC Lathe SPINNER TC 42-MC

          • Karl Günter Wirths GmbH
          • Scharpenberger Strasse 96-98
          • 58256 Ennepetal
          • Deutschland
          • 02333-79050
            02333-790555
          • sales@wirths.net
            www.wirths.net
          #1041-203450 · CNC Lathe

          SPINNER - TC 42-MC - - 2005 - 810D Siemens

          Technical details
          turning diameter over bed 0280 mm︱turning length 515 mm︱control 810D Siemens︱turning diameter over bed slide 240 mm︱spindle turning speed - stepless 0- 6000 U/min- rpm︱spindle bore 80 mm︱feeds 0- 15/24 m/min︱voltage 400 V︱connected load 32 KW︱face slide travel 200 mm︱longitudinal travel 530 mm︱dimensions of the machine ca. m︱taper diameter VDI 20 mm︱main drive motor 24 kW︱
          Machine has 16 position turret with 8 pos. live tooling. Machine is without tailstock ! We will supply holder also for live tooling and a chuck along with the machine.
            turning diameter over bed 0280 mm
            turning length 515 mm
            control 810D Siemens
            turning diameter over bed slide 240 mm
            spindle turning speed - stepless 0- 6000 U/min- rpm
            spindle bore 80 mm
            feeds 0- 15/24 m/min
            voltage 400 V
            connected load 32 KW
            face slide travel 200 mm
            longitudinal travel 530 mm
            taper diameter VDI 20 mm
            main drive motor 24 kW
            Description :
            Machine has 16 position turret with 8 pos. live tooling. Machine is without
            tailstock ! We will supply holder also for live tooling and a chuck along with
            the machine.
          Datasheet
          Request / Contact

          Lathe - cycle-controlled

          used Lathe - cycle-controlled WAGNER WDE 500

          • Karl Günter Wirths GmbH
          • Scharpenberger Strasse 96-98
          • 58256 Ennepetal
          • Deutschland
          • 02333-79050
            02333-790555
          • sales@wirths.net
            www.wirths.net
          #1041-203436 · Lathe - cycle-controlled

          WAGNER - WDE 500 - - 2007 - 802 C

          Technical details
          turning diameter 0500 mm︱turning length 1500 mm︱control 802 C ︱turning dia. over face-slide 280 mm︱spindle bore 82 mm︱spindle turning speed range 20- 3000 U/min︱feeds - longitudinal 0- 5000 mm/min︱feeds - cross 0- 5000 min︱rapid traverse longitudinal 5 m/min︱rapid traverse cross 5 m/min︱main drive 7,5 kW︱travel -z axis 1435 mm︱travel -x axis 295 mm︱quill stroke 150 mm︱bed width 350 mm︱weight of the machine ca. 3 t︱dimensions of the machine ca. 3,23 x 1,47 x 1,73 m︱
          Cycle control Siemens 802 C
            turning diameter 0500 mm
            turning length 1500 mm
            control 802 C
            turning dia. over face-slide 280 mm
            spindle bore 82 mm
            spindle turning speed range 20- 3000 U/min
            feeds - longitudinal 0- 5000 mm/min
            feeds - cross 0- 5000 min
            rapid traverse longitudinal 5 m/min
            rapid traverse cross 5 m/min
            main drive 7,5 kW
            travel -z axis 1435 mm
            travel -x axis 295 mm
            quill stroke 150 mm
            bed width 350 mm
            weight of the machine ca. 3 t
            dimensions of the machine ca. 3,23 x 1,47 x 1,73 m
            Description :
            Cycle control Siemens 802 C
          Datasheet
          Request / Contact

          Roll Lathe

          used Roll Lathe WMW DXW 560

          • Karl Günter Wirths GmbH
          • Scharpenberger Strasse 96-98
          • 58256 Ennepetal
          • Deutschland
          • 02333-79050
            02333-790555
          • sales@wirths.net
            www.wirths.net
          #1041-20202 · Roll Lathe

          WMW - DXW 560 - - 1963 -

          Technical details
          turning diameter over bed 0630 mm︱turning diameter over slide rest 560 mm︱turning length 4100 mm︱centre distance 4500 mm︱workpiece weight 8 t︱spindle turning speed range 4,5- 56 U/min︱feed - longitudinal/cross 0,31-6,54/0,074-2,65 mm/min︱rapid traverse 1250 mm/min︱min./max workpiece dia. 140- 440 mm︱dimensions of the machine ca. 9 x 1,9 x 1,5 m︱connected load 27 kW︱weight of the machine ca. 17,3 t︱
          Machine was reconditioned and modernized in 2009 !
            turning diameter over bed 0630 mm
            turning diameter over slide rest 560 mm
            turning length 4100 mm
            centre distance 4500 mm
            workpiece weight 8 t
            spindle turning speed range 4,5- 56 U/min
            feed - longitudinal/cross 0,31-6,54/0,074-2,65 mm/min
            rapid traverse 1250 mm/min
            min./max workpiece dia. 140- 440 mm
            dimensions of the machine ca. 9 x 1,9 x 1,5 m
            connected load 27 kW
            weight of the machine ca. 17,3 t
            Description :
            Machine was reconditioned and modernized in 2009 !
          Datasheet
          Request / Contact

          Drilling Machine

          used Drilling Machine ERLO TCA 70

          • Karl Günter Wirths GmbH
          • Scharpenberger Strasse 96-98
          • 58256 Ennepetal
          • Deutschland
          • 02333-79050
            02333-790555
          • sales@wirths.net
            www.wirths.net
          #1041-50072 · Drilling Machine

          ERLO - TCA 70 - - 2005 -

          Technical details
          bore capacity in steel (diameter) 70 mm︱throat 400 mm︱bore stroke 260 mm︱spindle taper MT 5 ︱table-size 730 x 470 mm︱feed per revolution 0,05 - 0,5 (6) mm/r︱spindle turning speed range 35- 1238 U/min︱total power requirement 3 kW︱weight of the machine ca. 1,1 t︱dimensions of the machine ca. 1x1x2 m︱
          Pillar type drilling machine with automatic feed.
            bore capacity in steel (diameter. 70 mm
            throat 400 mm
            bore stroke 260 mm
            spindle taper MT 5
            table-size 730 x 470 mm
            feed per revolution 0,05 - 0,5 (6) mm/r
            spindle turning speed range 35- 1238 U/min
            total power requirement 3 kW
            weight of the machine ca. 1,1 t
            dimensions of the machine ca. 1x1x2 m
            Description :
            Pillar type drilling machine with automatic feed.
          Datasheet
          Request / Contact
          used Drilling Machine GILLARDON GB 40 VE

          • Karl Günter Wirths GmbH
          • Scharpenberger Strasse 96-98
          • 58256 Ennepetal
          • Deutschland
          • 02333-79050
            02333-790555
          • sales@wirths.net
            www.wirths.net
          #1041-50073 · Drilling Machine

          GILLARDON - GB 40 VE - - 1985 -

          Technical details
          bore capacity in steel (diameter) 40 mm︱throat 350 mm︱bore stroke 200 mm︱spindle taper MT 4 ︱table-size 500 dia. mm︱feed per revolution 0,1 - 1 mm/r︱spindle turning speed range 80- 1000 U/min︱total power requirement 2,8 kW︱weight of the machine ca. 0,7 t︱dimensions of the machine ca. 1x1x2 m︱
          Pillar type drilling machine with automatic feed threat cutting device.
            bore capacity in steel (diameter. 40 mm
            throat 350 mm
            bore stroke 200 mm
            spindle taper MT 4
            table-size 500 dia. mm
            feed per revolution 0,1 - 1 mm/r
            spindle turning speed range 80- 1000 U/min
            total power requirement 2,8 kW
            weight of the machine ca. 0,7 t
            dimensions of the machine ca. 1x1x2 m
            Description :
            Pillar type drilling machine with automatic feed threat cutting device.
          Datasheet
          Request / Contact

          Bed Type Milling Machine - Universal

          used Bed Type Milling Machine - Universal AUSTEN AX607

          • Karl Günter Wirths GmbH
          • Scharpenberger Strasse 96-98
          • 58256 Ennepetal
          • Deutschland
          • 02333-79050
            02333-790555
          • sales@wirths.net
            www.wirths.net
          #1041-10198 · Bed Type Milling Machine - Universal

          AUSTEN - AX607 - - 2018 - Basis HH

          Technical details
          x-travel 7000 mm︱y-travel 600 mm︱z-travel 600 mm︱Control Basis HH ︱spindle turning speed - stepless 20- 20.000 U/min︱spindle drive 11 kW︱feed in x - axis 0- 90 m/min︱feed in y - axis 0- 50 m/min︱feed range Z-direction 0- 40 mm/min︱tool change unit 15 Pos.︱spindle taper 63 HSK-E︱total power requirement 50 KVA︱weight of the machine ca. 12 t︱dimensions of the machine ca. 9 x 2 x 2,7 m︱
          5 axes high speed bed milling machine for working on long beams. It was especially designed for Aluminium window industries but could also be used for light work on steel. Spindle could be turned and swiveled automatically. Machine moves on linear guides and has direct measuring systems (HH).
            x-travel 7000 mm
            y-travel 600 mm
            z-travel 600 mm
            Control Basis HH
            spindle turning speed - stepless 20- 20.000 U/min
            spindle drive 11 kW
            feed in x - axis 0- 90 m/min
            feed in y - axis 0- 50 m/min
            feed range Z-direction 0- 40 mm/min
            tool change unit 15 Pos.
            spindle taper 63 HSK-E
            total power requirement 50 KVA
            weight of the machine ca. 12 t
            dimensions of the machine ca. 9 x 2 x 2,7 m
            Description :
            5 axes high speed bed milling machine for working on long beams. It was
            especially designed for Aluminium window industries but could also be used for
            light work on steel. Spindle could be turned and swiveled automatically.
            Machine moves on linear guides and has direct measuring systems (HH).
          Datasheet
          Request / Contact
          used Bed Type Milling Machine - Universal KIHEUNG TRAX 1200 LT

          • Karl Günter Wirths GmbH
          • Scharpenberger Strasse 96-98
          • 58256 Ennepetal
          • Deutschland
          • 02333-79050
            02333-790555
          • sales@wirths.net
            www.wirths.net
          #1041-11371 · Bed Type Milling Machine - Universal

          KIHEUNG - TRAX 1200 LT - - 2015 - 530 iTNC Heidenhain

          Technical details
          x-travel 6000 mm︱y-travel 1200 mm︱z-travel 1600 mm︱table-size 6000 x 2000 mm︱feed: 10 m/min︱rapid traverse 25 m/min︱spindle turning speed range 0- 4000 U/min︱tool taper SK 50 ︱Control 530 iTNC Heidenhain︱spindle drive 29/38 kW︱total power requirement 80 KVA︱weight of the machine ca. 36 t︱dimensions of the machine ca. 11,65 x 5,8 x 3,8 m︱
          CNC bed milling moving column machine with fixed table and linear guideways. Machine has a CNC controled universal milling head, ATC and chip conveyor.
            x-travel 6000 mm
            y-travel 1200 mm
            z-travel 1600 mm
            table-size 6000 x 2000 mm
            feed: 10 m/min
            rapid traverse 25 m/min
            spindle turning speed range 0- 4000 U/min
            tool taper SK 50
            Control 530 iTNC Heidenhain
            spindle drive 29/38 kW
            total power requirement 80 KVA
            weight of the machine ca. 36 t
            dimensions of the machine ca. 11,65 x 5,8 x 3,8 m
            Description :
            CNC bed milling moving column machine with fixed table and linear guideways.
            Machine has a CNC controled universal milling head, ATC and chip conveyor.
          Datasheet
          Request / Contact

          milling machining centers - universal

          used milling machining centers - universal DECKEL MAHO DMC 60 T

          • Karl Günter Wirths GmbH
          • Scharpenberger Strasse 96-98
          • 58256 Ennepetal
          • Deutschland
          • 02333-79050
            02333-790555
          • sales@wirths.net
            www.wirths.net
          #1041-10200 · milling machining centers - universal

          DECKEL MAHO - DMC 60 T - - 2006 - 840 D Powerline Siemens

          Technical details
          x-travel 760 mm︱y-travel 560 mm︱z-travel 560 mm︱control 840 D Powerline Siemens︱tool taper SK 40 ︱numbers of tools in magazin 60 ︱spindle turning speed - stepless 0- 12000 U/min︱size of pallet 630 x 500 mm︱total connected load 64,2 KVA︱feed stepless 20- 15.000 mm/min︱rapid traverse 50 m/min︱total power requirement 26 kW︱weight of the machine ca. 12 t︱dimensions of the machine ca. 5,2 x 4,5 x 2,45 m︱
          5 axes machining center with rotating table (C) and swiveling head (B). Machine has a pallet changing system with 2 pallets and an ATC with 60 positions. Machine has worked 20.000 spindle hours and was always well maintained.
            x-travel 760 mm
            y-travel 560 mm
            z-travel 560 mm
            control 840 D Powerline Siemens
            tool taper SK 40
            numbers of tools in magazin 60
            spindle turning speed - stepless 0- 12000 U/min
            size of pallet 630 x 500 mm
            total connected load 64,2 KVA
            feed stepless 20- 15.000 mm/min
            rapid traverse 50 m/min
            total power requirement 26 kW
            weight of the machine ca. 12 t
            dimensions of the machine ca. 5,2 x 4,5 x 2,45 m
            Description :
            5 axes machining center with rotating table (C) and swiveling head (B). Machine
            has a pallet changing system with 2 pallets and an ATC with 60 positions.
            Machine has worked 20.000 spindle hours and was always well maintained.
          Datasheet
          Request / Contact

          milling machining centers - vertical

          used milling machining centers - vertical BROTHER TC-R2A

          • Karl Günter Wirths GmbH
          • Scharpenberger Strasse 96-98
          • 58256 Ennepetal
          • Deutschland
          • 02333-79050
            02333-790555
          • sales@wirths.net
            www.wirths.net
          #1041-10204 · milling machining centers - vertical

          BROTHER - TC-R2A - - 2008 -

          Technical details
          x-travel 0480 mm︱y-travel 360 mm︱z-travel 270 mm︱table-size (2x) 600 x 300 mm︱spindle diameter 50 mm︱tool taper BT30 ︱spindle turning speed - stepless 10- 10.000 U/min︱feeds 1- 40000 mm/min︱rapid traverse 40 m/min︱spindle drive 7 kW︱connected load 15 kVA︱weight of the machine ca. 2 t︱dimensions of the machine ca. 1,8 x 1,7 x 2,3 m︱
          Control: Brother. Machine has 14 Position ATC and two tables in alternation.
            x-travel 0480 mm
            y-travel 360 mm
            z-travel 270 mm
            table-size (2x) 600 x 300 mm
            spindle diameter 50 mm
            tool taper BT30
            spindle turning speed - stepless 10- 10.000 U/min
            feeds 1- 40000 mm/min
            rapid traverse 40 m/min
            spindle drive 7 kW
            connected load 15 kVA
            weight of the machine ca. 2 t
            dimensions of the machine ca. 1,8 x 1,7 x 2,3 m
            Description :
            Control: Brother. Machine has 14 Position ATC and two tables in
            alternation.
          Datasheet
          Request / Contact
          used milling machining centers - vertical MAZAK Nexus 510C-II HS

          • Karl Günter Wirths GmbH
          • Scharpenberger Strasse 96-98
          • 58256 Ennepetal
          • Deutschland
          • 02333-79050
            02333-790555
          • sales@wirths.net
            www.wirths.net
          #1041-10199 · milling machining centers - vertical

          MAZAK - Nexus 510C-II HS - - 2007 - MAZATROL Matrix

          Technical details
          x-travel 1.050 mm︱y-travel 510 mm︱z-travel 510 mm︱table: 1.300 x 660 mm︱ 1.000 Kg︱control MAZATROL Matrix ︱ 0- 15000 U/min/rpm︱spindle motor 15 kW︱ 30 pos.︱operating hours 55350 h︱ 20560 h︱chip conveyor Inkl. ︱total wight 7,5 t︱total power requirement 30 kW︱weight of the machine ca. 7,5 t︱dimensions of the machine ca. 4 x 3,4 x 3 m︱
          Machining center with lots of tool holders.
            x-travel 1.050 mm
            y-travel 510 mm
            z-travel 510 mm
            table: 1.300 x 660 mm
            1.000 Kg
            control MAZATROL Matrix
            0- 15000 U/min/rpm
            spindle motor 15 kW
            30 pos.
            operating hours 55350 h
            20560 h
            chip conveyor Inkl.
            total wight 7,5 t
            total power requirement 30 kW
            weight of the machine ca. 7,5 t
            dimensions of the machine ca. 4 x 3,4 x 3 m
            Description :
            Machining center with lots of tool holders.
          Datasheet
          Request / Contact
          used milling machining centers - vertical CHIRON FZ 15 W Highspeed

          • Karl Günter Wirths GmbH
          • Scharpenberger Strasse 96-98
          • 58256 Ennepetal
          • Deutschland
          • 02333-79050
            02333-790555
          • sales@wirths.net
            www.wirths.net
          #1041-10187 · milling machining centers - vertical

          CHIRON - FZ 15 W Highspeed - - 2004 -

          Technical details
          x-travel 0550 mm︱y-travel 400 mm︱z-travel 425 mm︱table-size (2x) 660 x 400 mm︱spindle diameter 70 mm︱tool taper HSK 63 ︱spindle turning speed - stepless 20 - 12000 U/min︱feeds 1- 60000 mm/min︱rapid traverse 60000 mm/min︱spindle drive 14 kW︱connected load 32 kVA︱weight of the machine ca. 7,4 t︱dimensions of the machine ca. 4,5 x2,3 x 2,5 m︱
          Control: Siemens 840 D. Machine has 20 Position ATC and two tables in alternation. Main working spindle was renewed in 2022.
            x-travel 0550 mm
            y-travel 400 mm
            z-travel 425 mm
            table-size (2x) 660 x 400 mm
            spindle diameter 70 mm
            tool taper HSK 63
            spindle turning speed - stepless 20 - 12000 U/min
            feeds 1- 60000 mm/min
            rapid traverse 60000 mm/min
            spindle drive 14 kW
            connected load 32 kVA
            weight of the machine ca. 7,4 t
            dimensions of the machine ca. 4,5 x2,3 x 2,5 m
            Description :
            Control: Siemens 840 D. Machine has 20 Position ATC and two tables in
            alternation. Main working spindle was renewed in 2022.
          Datasheet
          Request / Contact

          Universal Milling Machine

          used Universal Milling Machine OPTIMUM UF100

          • Karl Günter Wirths GmbH
          • Scharpenberger Strasse 96-98
          • 58256 Ennepetal
          • Deutschland
          • 02333-79050
            02333-790555
          • sales@wirths.net
            www.wirths.net
          #1041-1111192 · Universal Milling Machine

          OPTIMUM - UF100 - - 2009 -

          Technical details
          x-travel 0600 mm︱y-travel 270 mm︱z-travel 430 mm︱table-size 1120 x 260 mm︱spindle turning speed range 40 - 1600 U/min︱spindle taper SK 40 ︱feed in x - axis 50 - 1000 mm/min︱feed range Z-direction 24- 402 mm/min︱rapid traverse x + z axis 1 m/min︱rapid motion - y-axis 1 m/min︱drive capacity - spindle motor 2,2 kW︱total power requirement 3,5 kW︱weight of the machine ca. 1,4 t︱dimensions of the machine ca. 1,7 x 1,4 x 1,75 m︱
          Machine has a universal milling head, horizontal milling arrangement and DRO.
            x-travel 0600 mm
            y-travel 270 mm
            z-travel 430 mm
            table-size 1120 x 260 mm
            spindle turning speed range 40 - 1600 U/min
            spindle taper SK 40
            feed in x - axis 50 - 1000 mm/min
            feed range Z-direction 24- 402 mm/min
            rapid traverse x + z axis 1 m/min
            rapid motion - y-axis 1 m/min
            drive capacity - spindle motor 2,2 kW
            total power requirement 3,5 kW
            weight of the machine ca. 1,4 t
            dimensions of the machine ca. 1,7 x 1,4 x 1,75 m
            Description :
            Machine has a universal milling head, horizontal milling arrangement and DRO.
          Datasheet
          Request / Contact
          used Universal Milling Machine DECKEL FP4A CNC

          • Karl Günter Wirths GmbH
          • Scharpenberger Strasse 96-98
          • 58256 Ennepetal
          • Deutschland
          • 02333-79050
            02333-790555
          • sales@wirths.net
            www.wirths.net
          #1041-1111194 · Universal Milling Machine

          DECKEL - FP4A CNC - - 1991 -

          Technical details
          x-travel 0600 mm︱y-travel 500 mm︱z-travel 500 mm︱table-size 900 x 530 mm︱CNC control Dialog 11 ︱feed range 0- 10.000 mm/min︱rapid traverse 10 m/min︱Tool bore ISO 40 ︱turning speed range 20 - 4000 U/min︱main drive DC 8 kW︱total power requirement 15 kW︱weight of the machine ca. 5500 kg︱dimensions of the machine ca. 3,0x2,5x2,0 m︱
          CNC milling machine with Dialog 11 control, housing arround working area and tool change with 26 pos.
            x-travel 0600 mm
            y-travel 500 mm
            z-travel 500 mm
            table-size 900 x 530 mm
            CNC control Dialog 11
            feed range 0- 10.000 mm/min
            rapid traverse 10 m/min
            Tool bore ISO 40
            turning speed range 20 - 4000 U/min
            main drive DC 8 kW
            total power requirement 15 kW
            weight of the machine ca. 5500 kg
            dimensions of the machine ca. 3,0x2,5x2,0 m
            Description :
            CNC milling machine with Dialog 11 control, housing arround working area and
            tool change with 26 pos.
          Datasheet
          Request / Contact
          used Universal Milling Machine DECKEL FP4A

          • Karl Günter Wirths GmbH
          • Scharpenberger Strasse 96-98
          • 58256 Ennepetal
          • Deutschland
          • 02333-79050
            02333-790555
          • sales@wirths.net
            www.wirths.net
          #1041-1111195 · Universal Milling Machine

          DECKEL - FP4A - - 1990 -

          Technical details
          x-travel 0600 mm︱y-travel 500 mm︱z-travel 500 mm︱table-size 900 x 530 mm︱CNC control TNC 355 Heidenhain︱feed range 0- 10.000 mm/min︱rapid traverse 10 m/min︱Tool bore ISO 40 ︱turning speed range 20 - 4000 U/min︱main drive DC 8 kW︱total power requirement 15 kW︱weight of the machine ca. 5500 kg︱dimensions of the machine ca. 3,0x2,5x2,0 m︱
          CNC milling machine with Heidenhain TNC 355 control and housing arround working table.
            x-travel 0600 mm
            y-travel 500 mm
            z-travel 500 mm
            table-size 900 x 530 mm
            CNC control TNC 355 Heidenhain
            feed range 0- 10.000 mm/min
            rapid traverse 10 m/min
            Tool bore ISO 40
            turning speed range 20 - 4000 U/min
            main drive DC 8 kW
            total power requirement 15 kW
            weight of the machine ca. 5500 kg
            dimensions of the machine ca. 3,0x2,5x2,0 m
            Description :
            CNC milling machine with Heidenhain TNC 355 control and housing arround working
            table.
          Datasheet
          Request / Contact
          used Universal Milling Machine MAHO MH 700 C (CNC)

          • Karl Günter Wirths GmbH
          • Scharpenberger Strasse 96-98
          • 58256 Ennepetal
          • Deutschland
          • 02333-79050
            02333-790555
          • sales@wirths.net
            www.wirths.net
          #1041-1111184 · Universal Milling Machine

          MAHO - MH 700 C (CNC) - - 1989 -

          Technical details
          x-travel 0700 mm︱y-travel 450 mm︱z-travel 500 mm︱table-size 680 x 380 mm︱CNC control 432 PHILIPS ︱feed range 1-3000 mm/min︱rapid traverse 6 m/min︱Tool bore ISO 40 ︱turning speed range 20 - 3150 U/min︱main drive DC 8 kW︱milling head -swivable +/- 90 °︱total power requirement 23 kW︱weight of the machine ca. 3200 kg︱dimensions of the machine ca. 3,0x2,5x2,0 m︱
          CNC milling machine with 432 Control and universal table.
            x-travel 0700 mm
            y-travel 450 mm
            z-travel 500 mm
            table-size 680 x 380 mm
            CNC control 432 PHILIPS
            feed range 1-3000 mm/min
            rapid traverse 6 m/min
            Tool bore ISO 40
            turning speed range 20 - 3150 U/min
            main drive DC 8 kW
            milling head -swivable +/- 90 °
            total power requirement 23 kW
            weight of the machine ca. 3200 kg
            dimensions of the machine ca. 3,0x2,5x2,0 m
            Description :
            CNC milling machine with 432 Control and universal table.
          Datasheet
          Request / Contact

          Cylindrical Grinding Machine

          used Cylindrical Grinding Machine STUDER S 40

          • Karl Günter Wirths GmbH
          • Scharpenberger Strasse 96-98
          • 58256 Ennepetal
          • Deutschland
          • 02333-79050
            02333-790555
          • sales@wirths.net
            www.wirths.net
          #1041-12074 · Cylindrical Grinding Machine

          STUDER - S 40 - - 1996 - FANUC 16T

          Technical details
          grinding diameter 10- 200 mm︱grinding length 1050 mm︱centre height 175 mm︱Control FANUC 16T ︱max. workpiece weight between centers 120 kg︱x-axis 285 mm︱z-axis 1050 mm︱peripheral speed 1-50 m/sec︱grinding wheel size 400 x 80 x 175 mm︱turning speed range - workpiece spindle 1- 1500 U/min︱total power requirement 20 kVA︱weight of the machine ca. 5 t︱dimensions of the machine ca. 3,5 x 2,4 x 2 m︱
          Machine has Fanuc CNC control 16T.
            grinding diameter 10- 200 mm
            grinding length 1050 mm
            centre height 175 mm
            Control FANUC 16T
            max. workpiece weight between ce. 120 kg
            x-axis 285 mm
            z-axis 1050 mm
            peripheral speed 1-50 m/sec
            grinding wheel size 400 x 80 x 175 mm
            turning speed range - workpiece . 1- 1500 U/min
            total power requirement 20 kVA
            weight of the machine ca. 5 t
            dimensions of the machine ca. 3,5 x 2,4 x 2 m
            Description :
            Machine has Fanuc CNC control 16T.

          Datasheet
          Request / Contact
          used Cylindrical Grinding Machine MSO FM

          • Karl Günter Wirths GmbH
          • Scharpenberger Strasse 96-98
          • 58256 Ennepetal
          • Deutschland
          • 02333-79050
            02333-790555
          • sales@wirths.net
            www.wirths.net
          #1041-12072 · Cylindrical Grinding Machine

          MSO - FM - - 1966 -

          Technical details
          grinding diameter 280 mm︱grinding length 750 mm︱centre height 150 mm︱total power requirement 3,5 kW︱weight of the machine ca. 1,3 t︱dimensions of the machine ca. 1,8 x 1,4 x 1,5 m︱angle of table min./max. 0- 8 Grad︱grinding slide stroke 150 mm︱grinding slide swivable +/- 90 °︱workpiece swivable +/- 90 °︱grinding wheel size 320 mm︱max. workpiece weight -without tailstock 50 kg︱voltage 400 V︱
          With internal grinding arrangement and tail stock.
            grinding diameter 280 mm
            grinding length 750 mm
            centre height 150 mm
            total power requirement 3,5 kW
            weight of the machine ca. 1,3 t
            dimensions of the machine ca. 1,8 x 1,4 x 1,5 m
            angle of table min./max. 0- 8 Grad
            grinding slide stroke 150 mm
            grinding slide swivable +/- 90 °
            workpiece swivable +/- 90 °
            grinding wheel size 320 mm
            max. workpiece weight -without t. 50 kg
            voltage 400 V
            Description :
            With internal grinding arrangement and tail stock.
          Datasheet
          Request / Contact

          Surface Grinding Machine - Horizontal

          used Surface Grinding Machine - Horizontal JACOBSEN SJ 30

          • Karl Günter Wirths GmbH
          • Scharpenberger Strasse 96-98
          • 58256 Ennepetal
          • Deutschland
          • 02333-79050
            02333-790555
          • sales@wirths.net
            www.wirths.net
          #1041-124108 · Surface Grinding Machine - Horizontal

          JACOBSEN - SJ 30 - - 1988 -

          Technical details
          grinding length 600 mm︱grinding width 200 mm︱workpiece height 250 mm︱magnetic plate size 600 x 200 mm︱total power requirement 4,5 kW︱weight of the machine ca. 2,5 t︱dimensions of the machine ca. 2000 x 1200 x 1650 mm︱
          With magnetic plate 600 x 200 mm and automatic dressing arrangement.
            grinding length 600 mm
            grinding width 200 mm
            workpiece height 250 mm
            magnetic plate size 600 x 200 mm
            total power requirement 4,5 kW
            weight of the machine ca. 2,5 t
            dimensions of the machine ca. 2000 x 1200 x 1650 mm
            Description :
            With magnetic plate 600 x 200 mm and automatic dressing arrangement.
          Datasheet
          Request / Contact
          used Surface Grinding Machine - Horizontal JACOBSEN SJ 30

          • Karl Günter Wirths GmbH
          • Scharpenberger Strasse 96-98
          • 58256 Ennepetal
          • Deutschland
          • 02333-79050
            02333-790555
          • sales@wirths.net
            www.wirths.net
          #1041-124109 · Surface Grinding Machine - Horizontal

          JACOBSEN - SJ 30 - - 1982 -

          Technical details
          grinding length 600 mm︱grinding width 200 mm︱workpiece height 250 mm︱magnetic plate size 600 x 200 mm︱total power requirement 4,5 kW︱weight of the machine ca. 2,5 t︱dimensions of the machine ca. 2000 x 1200 x 1650 mm︱
          With magnetic plate 600 x 200 mm and automatic dressing arrangement.
            grinding length 600 mm
            grinding width 200 mm
            workpiece height 250 mm
            magnetic plate size 600 x 200 mm
            total power requirement 4,5 kW
            weight of the machine ca. 2,5 t
            dimensions of the machine ca. 2000 x 1200 x 1650 mm
            Description :
            With magnetic plate 600 x 200 mm and automatic dressing arrangement.
          Datasheet
          Request / Contact

          Band Saw - Automatic - Horizontal

          used Band Saw - Automatic - Horizontal BIANCO Mod. 350

          • Karl Günter Wirths GmbH
          • Scharpenberger Strasse 96-98
          • 58256 Ennepetal
          • Deutschland
          • 02333-79050
            02333-790555
          • sales@wirths.net
            www.wirths.net
          #1041-16159 · Band Saw - Automatic - Horizontal

          BIANCO - Mod. 350 - - 2000 -

          Technical details
          capacity 90 degrees: round 350 mm︱capacity 90 degrees: square 350 mm︱ 350 x 300 ︱saw band length mm︱table height 835 mm︱band speed 15 - 110 m/min︱Control ︱total power requirement 1,5/1,8 kW︱weight of the machine ca. 0,8 t︱dimensions of the machine ca. 1,7 x 1,7 x 1,8 m︱
          Automatic band saw with roller table.
            capacity 90 degrees: round 350 mm
            capacity 90 degrees: square 350 mm
            350 x 300
            table height 835 mm
            band speed 15 - 110 m/min
            total power requirement 1,5/1,8 kW
            weight of the machine ca. 0,8 t
            dimensions of the machine ca. 1,7 x 1,7 x 1,8 m
            Description :
            Automatic band saw with roller table.
          Datasheet
          Request / Contact

          Bandsaw - Horizontal

          used Bandsaw - Horizontal BEHRINGER HBP 500

          • Karl Günter Wirths GmbH
          • Scharpenberger Strasse 96-98
          • 58256 Ennepetal
          • Deutschland
          • 02333-79050
            02333-790555
          • sales@wirths.net
            www.wirths.net
          #1041-16155 · Bandsaw - Horizontal

          BEHRINGER - HBP 500 - - 1987 -

          Technical details
          cutting diameter 500 mm︱saw band length 6900 mm︱cutting width 1,3 mm︱height of blade 38 ︱voltage 400 V︱mitre joint cuts -/+ degrees nein ︱total power requirement 11 kW︱weight of the machine ca. 4,2 t︱dimensions of the machine ca. 2,9 x 3,5 x 2,4 m︱
          Machine has a driven loading infeed.
            cutting diameter 500 mm
            saw band length 6900 mm
            cutting width 1,3 mm
            height of blade 38
            voltage 400 V
            mitre joint cuts -/+ degrees nein
            total power requirement 11 kW
            weight of the machine ca. 4,2 t
            dimensions of the machine ca. 2,9 x 3,5 x 2,4 m
            Description :
            Machine has a driven loading infeed.
          Datasheet
          Request / Contact
          •   
          •   
          • 1  
          • 2  
          • 3  
          •   
          •   
            •

            Trader Profile:   Karl Günter Wirths GmbH

          Contact Trader



            Karl Günter Wirths GmbH
           Scharpenberger Strasse 96-98
            58256 - Ennepetal
            Deutschland
            02333-79050">02333-79050
            02333-790555
            sales@wirths.net
            www.wirths.net

          Profile of Trader

          About us - Wirths GmbH in Ennepetal

          wirths gmbh.Karl G. Wirths founded the company in 1956 as a mechanical workshop. 1961 he developed a die shop for pressing and forming dies. In that time 30 employees were working as die makers in the work shop.
           
          Parallel Karl G. Wirths started a shop for refurbishment of machine tools. That was also the start for the machine tool business.

          The die shop was closed 1972 but the machine tool business was developed.

          In 1972 the first stock was erected. Up to now buildings with up to 50 t crane capacity.

          In that stock we always keep approx. 250 machines.

          We are not focused on a one time business but on a long term business relative with our domestic customers and customers from all places around the world.

          Contact us

          Wirths GmbHKarl Günter Wirths GmbH
          Scharpenberger Str. 96-98
          D-58256 Ennepetal / Germany



          Karl Günter Wirths GmbH 58256 - Ennepetal Scharpenberger Strasse 96-98 Deutschland
          Karl Günter Wirths GmbH

          Scharpenberger Strasse 96-98



          Contact Trader


            Karl Günter Wirths GmbH
           Scharpenberger Strasse 96-98
            58256 - Ennepetal
            Deutschland
            02333-79050
            02333-790555
            sales@wirths.net
            www.wirths.net
            Contact person:
           
          ACHTUNG: NEUE FAX Nr. 02333 790555

          Trader Profile



          Machine category


          Abkantpresse - hydraulisch · Anreißplatte · Aufspannplatte · Bandsäge - horizontal · Bandsägeautomat - Horizontal · Bearbeitungszentrum - Universal · Bearbeitungszentrum - Vertikal · Bettfräsmaschine - Universal · Bohrmaschine · CNC Drehmaschine · Doppelständerziehpresse - Hydraulisch · Drehmaschine - zyklengesteuert · Flachschleifmaschine - Horizontal · Fräskopf · Fräsmaschine - Universal · Fräswerkzeuge · Handhebel-Schere · Karusselldrehmaschine - Doppelständer · Karusselldrehmaschine - Einständer · Messmaschine · Plattenfeld · Richtplatte · Rundschleifmaschine · Rundteiltisch - Automatisch · Rundtisch - Universal · Spitzendrehmaschine · Stanzautomat-Doppelständer · Tafelschere - hydraulisch · Tafelschere - mechanisch · Teilapparat · Walzendrehmaschine · Werkstattpresse - hydraulisch ·
          Compendium
          Software
          Used machines content
          Privacy
          Follow us
          ©2000 - 2024, Logotech oHG · Software- and Internet Services - All rights reserved