European network of stockholding machinery dealers

Bitte einen Suchbegriff eingeben - Please enter a search term
Category:
    Manufacturer:
      Machines:
        Trader:

          Knops Werkzeugmaschinen GmbH & Co. KG - Stockist for used machines

          Machinelist:


          Planer-Type Milling M/C - Double Column

          used  Planer-Type Milling M/C - Double Column WALDRICH-COBURG 14-10 FP200NC/3,5m


          • Knops Werkzeugmaschinen
          • Konrad-Zuse-Straße 5
          • 40789 Monheim
          • Deutschland

          • 02173 - 39494-0
            02173 - 39494-29
          • maschinen@knops.de
            www.knops.de
          #1022-E05621 · Planer-Type Milling M/C - Double Column

          WALDRICH-COBURG - 14-10 FP200NC/3,5m - - 1986/2009 retrofit - Heidenhain iTNC 530

          Technical details
          x-travel 6200 mm︱y-travel 3200 mm︱z-travel 1000 mm︱Control Heidenhain iTNC 530 ︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. 12,7 x 11,0 x 6,0 m︱
          Retrofit: 2009 CNC control Heidenhain iTNC 530 The angle milling head is adjusted via the NC program automatically. In this case, the head is treated as a C axis and represents the angles accordingly (to the degree) fully automatically. X-axis (longitudinal adjustment of the table) Lubrication: Hydrostatic lubrication Travel distance: 6200 mm Maximum feed speed: 15 m / min Direct distance measuring system from Heidenhain Y-axis (transverse adjustment of the milling support) Lubrication: Hydrostatic lubrication Travel distance: 3200 mm Maximum feed speed: 15 m / min Direct distance measuring system from Heidenhain Z-axis (vertical adjustment of the milling spindle slide) Travel distance: 1000 mm Maximum feed rate: 17.5 m / min Direct distance measuring system from Heidenhain W-axis Drive via two ball screws (D = 100 mm / P = 20 mm) with one each Low-backlash planetary gearbox and hydraulic counterbalance. Travel distance: 1500 mm Maximum feed rate: 10 m / min Direct distance measuring system from Heidenhain Passage between columns without stand covers: 2500 mm with stand covers: 2350 mm Passage table to portal: 2000 mm (possibly 2250) mm Pallet size: 2000 x 3500 mm T-slots: Longitudinal: 28 mm / Cross: 28 mm Distance T-slots: Longitudinal: 125mm / Cross: 125mm Max. Workpiece weight: 20,000 kg Pallet carrier width (undercounter): 1750 mm Pallet carrier over corridor: approx. 20 mm Upper edge of pallet over corridor: 400 mm Main spindle drive Speed ??range: 5-2000 1 / min Tool holder: SK 50 Gear stage: 4 Motor power 78 kW (25% ED) additional units 4.1 High Speed ??- Front Mount 15 kW (SLVL 30 SZ / 1: 3) With oil circulation cooling and internal coolant supply * Tool holder: SK50 according to DIN69 871 part 1 Hydraulic tool clamp with tightening bolt according to DIN 69 872 form AD Gear ratio: i = 3: 1 Max. Drive speed: n1 = 1666 1 / min Max. Output speed: n2 = 5000 1 / min Max. Output torque: M = 300 Nm Max. Milling power: P = 15 kW Angle milling head 25 kW (WFMD 150 SZ) Automatically swiveling via main spindle Clamping via Hirth serration; gradual division Tool holder: SK50 according to DIN69 871 part 1 Hydraulic tool clamp with tightening bolt according to DIN 69 872 form AD Internal coolant supply * Gear ratio: i = 2: 1 Max. Drive speed: n1 = 600 1 / min Max. Output speed: n2 = 600 1 / min Max. Output torque: M = 1500 Nm Max. Milling power: P = 25 kW Angle milling head 18 kW (WFMD 70 SZ) With oil circulation cooling and internal coolant supply * Automatically swiveling via main spindle Clamping via Hirth serration; gradual division Tool holder: SK50 according to DIN69 871 part 1 Hydraulic tool clamp with tightening bolt according to DIN 69 872 form AD Gear ratio: i = 2 Max. Drive speed: n1 = 1800 1 / min Max. Output speed: n2 = 3600 1 / min Max. Output torque: M = 700 Nm Max. Milling power: P = 18 kW Pallet changing system Semi-automatic pallet changing system Tool changer Capacity of the tool magazine: 300 pieces SK50 Intermediate buffer with 4 tool slots Cutting and cooling equipment Volume of coolant tank: V = 3000 l Wastewater treatment via belt filter system Internal coolant supply (IKZ) with blown air through spindle center High pressure pump (screw pump) with adjustable pressure Pressure range: P = 5 - 60 bar Flow rate: Qmax = 60 l / min External coolant supply (AKZ) Submersible centrifugal pump (20l at 2bar) Protective and safety devices Probe Renishaw RMP60
            x-travel 6200 mm
            y-travel 3200 mm
            z-travel 1000 mm
            Control Heidenhain iTNC 530
            dimensions of the machine ca. 12,7 x 11,0 x 6,0 m
            Description :
            Retrofit: 2009
            CNC control Heidenhain iTNC 530
            The angle milling head is adjusted via the NC program
            automatically.
            In this case, the head is treated as a C axis and represents the angles
            accordingly (to the degree) fully automatically.

            X-axis (longitudinal adjustment of the table)
            Lubrication: Hydrostatic lubrication
            Travel distance: 6200 mm
            Maximum feed speed: 15 m / min
            Direct distance measuring system from Heidenhain

            Y-axis (transverse adjustment of the milling support)
            Lubrication: Hydrostatic lubrication
            Travel distance: 3200 mm
            Maximum feed speed: 15 m / min
            Direct distance measuring system from Heidenhain

            Z-axis (vertical adjustment of the milling spindle slide)
            Travel distance: 1000 mm
            Maximum feed rate: 17.5 m / min
            Direct distance measuring system from Heidenhain

            W-axis
            Drive via two ball screws (D = 100 mm / P = 20 mm) with one each
            Low-backlash planetary gearbox and hydraulic counterbalance.
            Travel distance: 1500 mm
            Maximum feed rate: 10 m / min
            Direct distance measuring system from Heidenhain

            Passage between columns
            without stand covers: 2500 mm
            with stand covers: 2350 mm
            Passage table to portal: 2000 mm (possibly 2250) mm

            Pallet size: 2000 x 3500 mm
            T-slots: Longitudinal: 28 mm / Cross: 28 mm
            Distance T-slots: Longitudinal: 125mm / Cross: 125mm
            Max. Workpiece weight: 20,000 kg
            Pallet carrier width (undercounter): 1750 mm
            Pallet carrier over corridor: approx. 20 mm
            Upper edge of pallet over corridor: 400 mm

            Main spindle drive
            Speed ??range: 5-2000 1 / min
            Tool holder: SK 50
            Gear stage: 4
            Motor power 78 kW (25% ED)

            additional units
            4.1 High Speed ??- Front Mount 15 kW (SLVL 30 SZ / 1: 3)
            With oil circulation cooling and internal coolant supply *
            Tool holder: SK50 according to DIN69 871 part 1
            Hydraulic tool clamp with tightening bolt according to DIN 69 872 form AD
            Gear ratio: i = 3: 1
            Max. Drive speed: n1 = 1666 1 / min
            Max. Output speed: n2 = 5000 1 / min
            Max. Output torque: M = 300 Nm
            Max. Milling power: P = 15 kW

            Angle milling head 25 kW (WFMD 150 SZ)
            Automatically swiveling via main spindle
            Clamping via Hirth serration; gradual division
            Tool holder: SK50 according to DIN69 871 part 1
            Hydraulic tool clamp with tightening bolt according to DIN 69 872 form AD
            Internal coolant supply *
            Gear ratio: i = 2: 1
            Max. Drive speed: n1 = 600 1 / min
            Max. Output speed: n2 = 600 1 / min
            Max. Output torque: M = 1500 Nm
            Max. Milling power: P = 25 kW

            Angle milling head 18 kW (WFMD 70 SZ)
            With oil circulation cooling and internal coolant supply *
            Automatically swiveling via main spindle
            Clamping via Hirth serration; gradual division
            Tool holder: SK50 according to DIN69 871 part 1
            Hydraulic tool clamp with tightening bolt according to DIN 69 872 form AD
            Gear ratio: i = 2
            Max. Drive speed: n1 = 1800 1 / min
            Max. Output speed: n2 = 3600 1 / min
            Max. Output torque: M = 700 Nm
            Max. Milling power: P = 18 kW

            Pallet changing system
            Semi-automatic pallet changing system

            Tool changer
            Capacity of the tool magazine: 300 pieces SK50
            Intermediate buffer with 4 tool slots

            Cutting and cooling equipment
            Volume of coolant tank: V = 3000 l
            Wastewater treatment via belt filter system

            Internal coolant supply (IKZ) with blown air through spindle center
            High pressure pump (screw pump) with adjustable pressure
            Pressure range: P = 5 - 60 bar
            Flow rate: Qmax = 60 l / min

            External coolant supply (AKZ)
            Submersible centrifugal pump (20l at 2bar)

            Protective and safety devices

            Probe
            Renishaw RMP60
          Datasheet
          Request / Contact
          used  Planer-Type Milling M/C - Double Column WALDRICH-COBURG 17-10 FP 225


          • Knops Werkzeugmaschinen
          • Konrad-Zuse-Straße 5
          • 40789 Monheim
          • Deutschland

          • 02173 - 39494-0
            02173 - 39494-29
          • maschinen@knops.de
            www.knops.de
          #1022-H07837 · Planer-Type Milling M/C - Double Column

          WALDRICH-COBURG - 17-10 FP 225 - - 1985/2003 - Siemens 840 D

          Technical details
          x-travel 6600 mm︱y-travel 3200 mm︱z-travel 1000 mm︱w-axis 1750 mm︱Control Siemens 840 D ︱column daylight 2650 mm︱distance spindle nose and table 2500 mm︱table surface area 6400 x 2250 mm︱table load 50 t︱tool taper ISO 60 ︱spindle turning speed range 5 - 2000 U/min︱table feed 10 - 15000 mm/min︱feeds crossrail-slide horizontal 10 - 10000 mm/min︱feed (W) 10 - 2000 mm/min︱spindle motor 55 kW︱total power requirement 85 kW︱weight of the machine ca. 125 t︱dimensions of the machine ca. 18 x 9,5 x 6,5 m︱
          Machine general overhauled and equipped with SIEMENS 840 D control in 2003 - new digital motors, drive controllers, measuring systems and switch cabinet - tool changer for 60 tools (45 ISO 50, 15 ISO 60) - 3 angular milling heads (HSD 175, WFD 800) with service device 4 x 90 deg. indexing - hydrostatic table guideways - adjustable crossrail - 2 tables coupled - chip conveyor - coolant device Machine can be inspected under power, subject to prior notice.
            x-travel 6600 mm
            y-travel 3200 mm
            z-travel 1000 mm
            w-axis 1750 mm
            Control Siemens 840 D
            column daylight 2650 mm
            distance spindle nose and table 2500 mm
            table surface area 6400 x 2250 mm
            table load 50 t
            tool taper ISO 60
            spindle turning speed range 5 - 2000 U/min
            table feed 10 - 15000 mm/min
            feeds crossrail-slide horizontal 10 - 10000 mm/min
            feed (W) 10 - 2000 mm/min
            spindle motor 55 kW
            total power requirement 85 kW
            weight of the machine ca. 125 t
            dimensions of the machine ca. 18 x 9,5 x 6,5 m
            Description :
            Machine general overhauled and equipped with SIEMENS 840 D control in 2003

            - new digital motors, drive controllers, measuring systems and switch cabinet
            - tool changer for 60 tools (45 ISO 50, 15 ISO 60)
            - 3 angular milling heads (HSD 175, WFD 800) with service device 4 x 90 deg.
            indexing
            - hydrostatic table guideways
            - adjustable crossrail
            - 2 tables coupled
            - chip conveyor
            - coolant device

            Machine can be inspected under power, subject to prior notice.
          Datasheet
          Request / Contact

          Tool Room Milling Machine - Universal

          used  Tool Room Milling Machine - Universal DECKEL FP 1


          • Knops Werkzeugmaschinen
          • Konrad-Zuse-Straße 5
          • 40789 Monheim
          • Deutschland

          • 02173 - 39494-0
            02173 - 39494-29
          • maschinen@knops.de
            www.knops.de
          #1022-2301 · Tool Room Milling Machine - Universal

          DECKEL - FP 1 - - 1988 -

          Technical details
          x-travel 290 mm︱y-travel 150 mm︱z-travel 330 mm︱table surface area 210 x 600 mm︱tool taper SK 40 ︱total power requirement 9,5 kVA︱weight of the machine ca. 730 kg︱dimensions of the machine ca. 2000 x 2200 x 1655 mm︱
          The machine is in very good condition and comes from a a training workshop. Equipment: Safety cover and LED lamp retrofitted in 2016 3-axis active digital readout from Heidenhain Fixed angle table Coolant equipment Technical data: Longitudinal table movement, motorised / manual 290/300 mm Headstock transverse movement, motorised / manual 150/160 mm Vertical support movement, motorised / manual 330 / 340 mm Work spindle drive 1.5/1.9 kW Number of milling spindle speeds 16 Speed range 40 - 2000 rpm. Horizontal milling spindle Tool holder Standard taper 40 Feed range infinitely variable 5 - 500 mm/min. Creep speed 4 mm/min. Rapid traverse 1200 mm/min.
            x-travel 290 mm
            y-travel 150 mm
            z-travel 330 mm
            table surface area 210 x 600 mm
            tool taper SK 40
            total power requirement 9,5 kVA
            weight of the machine ca. 730 kg
            dimensions of the machine ca. 2000 x 2200 x 1655 mm
            Description :
            The machine is in very good condition and comes from a
            a training workshop.

            Equipment:
            Safety cover and LED lamp retrofitted in 2016
            3-axis active digital readout from Heidenhain
            Fixed angle table
            Coolant equipment

            Technical data:
            Longitudinal table movement, motorised / manual 290/300 mm
            Headstock transverse movement, motorised / manual 150/160 mm
            Vertical support movement, motorised / manual 330 / 340 mm
            Work spindle drive 1.5/1.9 kW
            Number of milling spindle speeds 16
            Speed range 40 - 2000 rpm.
            Horizontal milling spindle Tool holder Standard taper 40
            Feed range infinitely variable 5 - 500 mm/min.
            Creep speed 4 mm/min.
            Rapid traverse 1200 mm/min.

          Datasheet
          Request / Contact
          used  Tool Room Milling Machine - Universal DECKEL FP 1


          • Knops Werkzeugmaschinen
          • Konrad-Zuse-Straße 5
          • 40789 Monheim
          • Deutschland

          • 02173 - 39494-0
            02173 - 39494-29
          • maschinen@knops.de
            www.knops.de
          #1022-2303 · Tool Room Milling Machine - Universal

          DECKEL - FP 1 - - 1988 -

          Technical details
          x-travel 290 mm︱y-travel 150 mm︱z-travel 330 mm︱table surface area 210 x 600 mm︱tool taper SK 40 ︱total power requirement 9,5 kVA︱weight of the machine ca. 730 kg︱dimensions of the machine ca. 2000 x 2200 x 1655 m︱
          The machine is in very good condition and comes from a from a training workshop. Equipment: Safety cover and LED lamp retrofitted in 2016 3-axis active digital readout made by Heidenhain Fixed angle table Coolant equipment Technical data: Longitudinal table movement, motorised / manual 290/300 mm Headstock transverse movement, motorised / manual 150/160 mm Vertical support movement, motorised / manual 330 / 340 mm Work spindle drive 1.5/1.9 kW Number of milling spindle speeds 16 Speed range 40 - 2000 rpm. Horizontal milling spindle Tool holder Standard taper 40 Feed range infinitely variable 5 - 500 mm/min. Creep speed 4 mm/min. Rapid traverse 1200 mm/min.
            x-travel 290 mm
            y-travel 150 mm
            z-travel 330 mm
            table surface area 210 x 600 mm
            tool taper SK 40
            total power requirement 9,5 kVA
            weight of the machine ca. 730 kg
            dimensions of the machine ca. 2000 x 2200 x 1655 m
            Description :
            The machine is in very good condition and comes from a
            from a training workshop.

            Equipment:
            Safety cover and LED lamp retrofitted in 2016
            3-axis active digital readout made by Heidenhain
            Fixed angle table
            Coolant equipment

            Technical data:
            Longitudinal table movement, motorised / manual 290/300 mm
            Headstock transverse movement, motorised / manual 150/160 mm
            Vertical support movement, motorised / manual 330 / 340 mm
            Work spindle drive 1.5/1.9 kW
            Number of milling spindle speeds 16
            Speed range 40 - 2000 rpm.
            Horizontal milling spindle Tool holder Standard taper 40
            Feed range infinitely variable 5 - 500 mm/min.
            Creep speed 4 mm/min.
            Rapid traverse 1200 mm/min.

          Datasheet
          Request / Contact

          Travelling column milling machine

          used  Travelling column milling machine SORALUCE FR 16000


          • Knops Werkzeugmaschinen
          • Konrad-Zuse-Straße 5
          • 40789 Monheim
          • Deutschland

          • 02173 - 39494-0
            02173 - 39494-29
          • maschinen@knops.de
            www.knops.de
          #1022-H08867 · Travelling column milling machine

          SORALUCE - FR 16000 - - 1993/2009 retrofit - Heidenhain iTNC 530

          Technical details
          x-travel 16000 mm︱y-travel 1250 mm︱z-travel 3200 mm︱Control Heidenhain iTNC 530 ︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱
          The machine was extensively overhauled in 2009. With a new CNC Control make Heidenhain iTNC 530. Guides in the X-axis completely renewed, engines, drives and valves also renewed. An inspection under power in the factory is possible. CNC control Heidenhain iTNC 530i Travels: X axis 16000mm Y axis 1250mm Z axis 3200mm Milling spindle speeds 2000 rpm Swivel-type angle head: 2.5 deg Drive power: 37 KW Note: The machine will be sold without floor plates, tables and chip conveyor.
            x-travel 16000 mm
            y-travel 1250 mm
            z-travel 3200 mm
            Control Heidenhain iTNC 530
            Description :
            The machine was extensively overhauled in 2009. With a new CNC
            Control make Heidenhain iTNC 530. Guides in the X-axis
            completely renewed, engines, drives and valves also renewed.
            An inspection under power in the factory is possible.

            CNC control Heidenhain iTNC 530i

            Travels:
            X axis 16000mm
            Y axis 1250mm
            Z axis 3200mm

            Milling spindle speeds 2000 rpm
            Swivel-type angle head: 2.5 deg
            Drive power: 37 KW

            Note:
            The machine will be sold without floor plates, tables and chip conveyor.
          Datasheet
          Request / Contact

          Gear Grinding Machine

          used  Gear Grinding Machine PFAUTER G 320 CNC


          • Knops Werkzeugmaschinen
          • Konrad-Zuse-Straße 5
          • 40789 Monheim
          • Deutschland

          • 02173 - 39494-0
            02173 - 39494-29
          • maschinen@knops.de
            www.knops.de
          #1022-E06153 · Gear Grinding Machine

          PFAUTER - G 320 CNC - - 1995 - Siemens 840 C

          Technical details
          max. wheel diameter 330 mm︱gear width - mm︱max. module 7 ︱min. module 0,5 ︱Control Siemens 840 C ︱total power requirement 72 kVA︱weight of the machine ca. 11,7 t︱dimensions of the machine ca. m︱
          We offer a Pfauter model G 320 gear grinding machine for sale numerical control on 8 axes for the machining of gears with straight and helical toothing, with rolled profile for enveloping cuts, the one Worm profile disc used. Technical specifications: CNC control Siemens 840 C Controlled axes: X Radial axis Y Tangential Shift Z Vertical axis A Workhead rotation B Worm rotation during processing C Table rotation U Radial axis dresser V Tangential axis dresser Module 0.5 – 7.0 Minimum workpiece diameter 10 mm Maximum workpiece diameter 330 mm Number of teeth 10 - 600 Vertical carriage thrust Z 200 mm Horizontal grinding wheel - carriage stroke X 230 mm Tangential slide stroke Y 135 mm Angle of rotation of clamping head A ± 45? Maximum equipment weight 600 N Tailstock center stroke 65 mm Grinding wheel speed 2700 rpm. Grinding wheel mass: Max / min diameter: 400 / 270 mm Width: 104mm Bore: 160mm Machine weight 11700 kg Built-in power (machine only) 72 KVA Voltage and frequency 400 volts x 50 Hz
            max. wheel diameter 330 mm
            gear width - mm
            max. module 7
            min. module 0,5
            Control Siemens 840 C
            total power requirement 72 kVA
            weight of the machine ca. 11,7 t
            Description :
            We offer a Pfauter model G 320 gear grinding machine for sale
            numerical control on 8 axes for the machining of gears with straight
            and helical toothing, with rolled profile for enveloping cuts, the one
            Worm profile disc used.

            Technical specifications:
            CNC control Siemens 840 C
            Controlled axes:
            X Radial axis
            Y Tangential Shift
            Z Vertical axis
            A Workhead rotation
            B Worm rotation during processing
            C Table rotation
            U Radial axis dresser
            V Tangential axis dresser

            Module 0.5 – 7.0
            Minimum workpiece diameter 10 mm
            Maximum workpiece diameter 330 mm
            Number of teeth 10 - 600
            Vertical carriage thrust Z 200 mm
            Horizontal grinding wheel - carriage stroke X 230 mm
            Tangential slide stroke Y 135 mm
            Angle of rotation of clamping head A ± 45?
            Maximum equipment weight 600 N
            Tailstock center stroke 65 mm
            Grinding wheel speed 2700 rpm.
            Grinding wheel mass:
            Max / min diameter: 400 / 270 mm
            Width: 104mm
            Bore: 160mm

            Machine weight 11700 kg
            Built-in power (machine only) 72 KVA
            Voltage and frequency 400 volts x 50 Hz
          Datasheet
          Request / Contact

          Gear Hobbing Machine - Vertical

          used  Gear Hobbing Machine - Vertical GLEASON PFAUTER P 2800


          • Knops Werkzeugmaschinen
          • Konrad-Zuse-Straße 5
          • 40789 Monheim
          • Deutschland

          • 02173 - 39494-0
            02173 - 39494-29
          • maschinen@knops.de
            www.knops.de
          #1022-E06195 · Gear Hobbing Machine - Vertical

          GLEASON PFAUTER - P 2800 - - 2007 - Siemens 840 D

          Technical details
          max. wheel diameter 2800 mm︱gear width - mm︱max. module 20/30 ︱min. module ︱Control Siemens 840 D ︱total power requirement 40 kW︱weight of the machine ca. 50 t︱dimensions of the machine ca. 7 x 4,5 x 4,75 m︱
          The machine has only a few working hours and is like new. - The price of the new machine of this caliber is €2.35 million - With minimal operating hours, the machine is essentially new. - It is one of Gleason's largest machines - It has the possibility of dry or wet milling; and internal and external gearing. - The machine underwent a comprehensive manufacturer's inspection in July 2023 and is in impeccable working order. - Machine is currently partially assembled to allow potential buyers to verify all functionalities. If you wish to see the machine in operation, we have two identical machines running in our production facility, and you are welcome. CNC control Siemens 840 D Nominal workpiece diameter: 2800 mm Table diameter: 2500 mm Pitch wheel diameter: 2,200 mm Table bore diameter: 800 mm Table bore depth: 875 mm Machine nominal module Hobbing aprrox. 20 mm gear Milling approx.: 30 mm Smallest/largest distance between milling cutter and workpiece axis: 600/1,735 mm Largest axial slide path – special design: 1,000 mm Largest champable hob diameter: 350 mm Largest champable hob length: 375 mm Swivel range of the milling head: + 30/- 45o cutter arbor cone: HSK-B160 (hollow shank taper according to DIN 69063) Largest milling cutter displacement path: 300 mm SIEMENS path control SINUMERIK 840 D with 5 axes and 1 spindle (basic configuration) as well as electronic gear (EG) and integrated safety functions. MOTOR MILLING HEADS - for INTERNAL gears: I1 Millable nominal module in steel with a strength of around 600 N/mm2 approx. 25mm+ Cutter speed range 25 - 150 min-1 Min./Max. Wheelbase 280/1,820 mm Min. workpiece inner diameter approx. 1,000 mm ++ Max. workpiece ring thickness 240mm ++) Max. workpiece width 470mm ++) - EXTERNAL gears M2 -with the smallest external Ø 950 mm -with the largest external Ø 2800 mm ADDITIONAL DATA Table load capacity max.: 40.000 kg Total power requirement: 40 kW Weight of the machine: approx. 50 t Dimensions of the machine: 7 x 4,5 x 4,75 m
            max. wheel diameter 2800 mm
            gear width - mm
            max. module 20/30
            Control Siemens 840 D
            total power requirement 40 kW
            weight of the machine ca. 50 t
            dimensions of the machine ca. 7 x 4,5 x 4,75 m
            Description :
            The machine has only a few working hours and is like new.

            - The price of the new machine of this caliber is €2.35 million
            - With minimal operating hours, the machine is essentially new.
            - It is one of Gleason's largest machines
            - It has the possibility of dry or wet milling; and internal and external
            gearing.
            - The machine underwent a comprehensive manufacturer's inspection in July
            2023 and is in impeccable working order.
            - Machine is currently partially assembled to allow potential buyers to
            verify all functionalities. If you wish to see the machine in operation, we
            have two identical machines running in our production facility, and you are
            welcome.


            CNC control Siemens 840 D
            Nominal workpiece diameter: 2800 mm
            Table diameter: 2500 mm
            Pitch wheel diameter: 2,200 mm
            Table bore diameter: 800 mm
            Table bore depth: 875 mm
            Machine nominal module
            Hobbing aprrox. 20 mm gear
            Milling approx.: 30 mm
            Smallest/largest distance between milling cutter and workpiece axis: 600/1,735
            mm
            Largest axial slide path – special design: 1,000 mm
            Largest champable hob diameter: 350 mm
            Largest champable hob length: 375 mm
            Swivel range of the milling head: + 30/- 45o
            cutter arbor cone: HSK-B160 (hollow shank taper according to DIN 69063)
            Largest milling cutter displacement path: 300 mm
            SIEMENS path control SINUMERIK 840 D with 5 axes and 1 spindle (basic
            configuration) as well
            as electronic gear (EG) and integrated safety functions.
            MOTOR MILLING HEADS
            - for INTERNAL gears: I1
            Millable nominal module in steel with a strength of around 600 N/mm2 approx.
            25mm+
            Cutter speed range 25 - 150 min-1
            Min./Max. Wheelbase 280/1,820 mm
            Min. workpiece inner diameter approx. 1,000 mm ++
            Max. workpiece ring thickness 240mm ++)
            Max. workpiece width 470mm ++)
            - EXTERNAL gears M2
            -with the smallest external Ø 950 mm
            -with the largest external Ø 2800 mm
            ADDITIONAL DATA
            Table load capacity max.: 40.000 kg
            Total power requirement: 40 kW
            Weight of the machine: approx. 50 t
            Dimensions of the machine: 7 x 4,5 x 4,75 m

          Datasheet
          Request / Contact
          used  Gear Hobbing Machine - Vertical LIEBHERR L 3002 CNC


          • Knops Werkzeugmaschinen
          • Konrad-Zuse-Straße 5
          • 40789 Monheim
          • Deutschland

          • 02173 - 39494-0
            02173 - 39494-29
          • maschinen@knops.de
            www.knops.de
          #1022-E06189 · Gear Hobbing Machine - Vertical

          LIEBHERR - L 3002 CNC - - 1982 / 2006 retrofit -

          Technical details
          max. wheel diameter 3000 mm︱gear width 1000 mm︱max. module ︱min. module ︱Control ︱total power requirement 40 kW︱weight of the machine ca. 50 t︱dimensions of the machine ca. 7 x 4,5 x 4,75 m︱
          The machine was overhauled and modernized in 2006. CNC control: Siemens Sinumerik 840 D Table diameter: 2000 mm Max. wheel diameter: 3000 mm Gear width: 1000 mm Max. module: 24/28 Z axis: 1400 mm Y axis: 450 mm X-axis: 970 mm Max. helix angle: 45 ° Table hole diameter: 600 mm Distance between cutter center and table center: 200 - 2200 mm Hob diameter: 390 mm Maximum length of the cutter: 600 mm Rotary speeds of the hobs: 25 - 150 rpm Table load capacity max. 25000 kg Total power requirement: 40 kW Weight of the machine: 50 t Machine dimensions: 7 x 4.5 x 4.75 m Internal aggregate with the smallest internal fi 980mm and the largest internal fi 2200 driven. With the external head we can have the smallest external fi 950 mm and the largest external fi 2800.
            max. wheel diameter 3000 mm
            gear width 1000 mm
            total power requirement 40 kW
            weight of the machine ca. 50 t
            dimensions of the machine ca. 7 x 4,5 x 4,75 m
            Description :
            The machine was overhauled and modernized in 2006.

            CNC control: Siemens Sinumerik 840 D

            Table diameter: 2000 mm
            Max. wheel diameter: 3000 mm
            Gear width: 1000 mm
            Max. module: 24/28
            Z axis: 1400 mm
            Y axis: 450 mm
            X-axis: 970 mm
            Max. helix angle: 45 °
            Table hole diameter: 600 mm
            Distance between cutter center and table center: 200 - 2200 mm
            Hob diameter: 390 mm
            Maximum length of the cutter: 600 mm
            Rotary speeds of the hobs: 25 - 150 rpm
            Table load capacity max. 25000 kg
            Total power requirement: 40 kW
            Weight of the machine: 50 t
            Machine dimensions: 7 x 4.5 x 4.75 m

            Internal aggregate with the smallest internal fi 980mm and the largest internal
            fi 2200 driven.
            With the external head we can have the smallest external fi 950 mm and the
            largest
            external fi 2800.

          Datasheet
          Request / Contact

          accessories for grinding machines

          used  accessories for grinding machines SCHLEIFSPINDEL 102540B


          • Knops Werkzeugmaschinen
          • Konrad-Zuse-Straße 5
          • 40789 Monheim
          • Deutschland

          • 02173 - 39494-0
            02173 - 39494-29
          • maschinen@knops.de
            www.knops.de
          #1022-0029 · accessories for grinding machines

          SCHLEIFSPINDEL - 102540B - - -

          Technical details
          spindle speed: 40000 U/min︱diameter 100 mm︱length in total 300 mm︱Weight kg︱
          Little used internal grinding spindle Was used on a universal cylindrical grinding machine Studer make, model S30-1 Diameter 100 mm
            spindle speed: 40000 U/min
            diameter 100 mm
            length in total 300 mm
            Description :
            Little used internal grinding spindle

            Was used on a universal cylindrical grinding machine
            Studer make, model S30-1
            Diameter 100 mm
          Datasheet
          Request / Contact

          Cylindrical Grinding Machine

          used  Cylindrical Grinding Machine KARSTENS / WEISS


          • Knops Werkzeugmaschinen
          • Konrad-Zuse-Straße 5
          • 40789 Monheim
          • Deutschland

          • 02173 - 39494-0
            02173 - 39494-29
          • maschinen@knops.de
            www.knops.de
          #1022-E06166 · Cylindrical Grinding Machine

          KARSTENS / WEISS - - - 2011 retrofit -

          Technical details
          grinding diameter 200 mm︱grinding length 500 mm︱centre height - mm︱Control ︱total power requirement 36 kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱
          Grinding length approx. 500 mm Grinding diameter > 200 mm Grinding wheel diameter approx. 700 mm 30° bevel The basis is a Karstens grinding machine Equipment: Diameter measurement control and positionar KSS system and suction Information from our supplier: In very good condition for its age, after retrofit in 2014 only as a backup MASCHINE used. Purchase price EUR 350.000,- Machine with no defects and ready to use.
            grinding diameter 200 mm
            grinding length 500 mm
            centre height - mm
            total power requirement 36 kW
            Description :
            Grinding length approx. 500 mm
            Grinding diameter > 200 mm
            Grinding wheel diameter approx. 700 mm
            30° bevel
            The basis is a Karstens grinding machine
            Equipment:
            Diameter measurement control and positionar
            KSS system and suction

            Information from our supplier:
            In very good condition for its age, after retrofit in 2014 only as a backup
            MASCHINE used.
            Purchase price EUR 350.000,-
            Machine with no defects and ready to use.
          Datasheet
          Request / Contact

          Internal Grinding Machine

          used  Internal Grinding Machine MORARA Micro I


          • Knops Werkzeugmaschinen
          • Konrad-Zuse-Straße 5
          • 40789 Monheim
          • Deutschland

          • 02173 - 39494-0
            02173 - 39494-29
          • maschinen@knops.de
            www.knops.de
          #1022-1867 · Internal Grinding Machine

          MORARA - Micro I - - 1986 -

          Technical details
          internal diameter 2 - 40 mm︱grinding depth 70 mm︱swing diameter 285 mm︱total power requirement 5,5 kW︱weight of the machine ca. 1,5 t︱dimensions of the machine ca. m︱
          Machine in good working condition, with new e-motor for the working spindle drive. Machine video: https://youtu.be/N95AzX9D_QY Max. Distance chuck flange - wheelhead 390 mm Accessories: Grinding spindle, make PRECISE 20.000 - 66.000 rpm, power 1.3 kW Grinding spindle, make PRECISE 60.000 - 120.000 rpm, power 0.23 kW Magazine Machine documentation.
            internal diameter 2 - 40 mm
            grinding depth 70 mm
            swing diameter 285 mm
            total power requirement 5,5 kW
            weight of the machine ca. 1,5 t
            Description :
            Machine in good working condition, with new e-motor for the working spindle
            drive.
            Machine video:
            https://youtu.be/N95AzX9D_QY

            Max. Distance chuck flange - wheelhead 390 mm

            Accessories:
            Grinding spindle, make PRECISE 20.000 - 66.000 rpm, power 1.3 kW
            Grinding spindle, make PRECISE 60.000 - 120.000 rpm, power 0.23 kW
            Magazine
            Machine documentation.
          Datasheet
          Request / Contact

          Rotary Table Grinding Machine - 2 Spdl.

          used  Rotary Table Grinding Machine - 2 Spdl. REFORM RB 900 CNC


          • Knops Werkzeugmaschinen
          • Konrad-Zuse-Straße 5
          • 40789 Monheim
          • Deutschland

          • 02173 - 39494-0
            02173 - 39494-29
          • maschinen@knops.de
            www.knops.de
          #1022-2322 · Rotary Table Grinding Machine - 2 Spdl.

          REFORM - RB 900 CNC - - 2007 - Siemens 840 D

          Technical details
          rotary table diameter 900 mm︱grinding height 650 mm︱grinding head - power requirement 11 kW︱Control Siemens 840 D ︱swing dia. 1100 mm︱table turning speeds 1 - 100 U/min︱table load 800 kg︱total power requirement 55 kW︱weight of the machine ca. 13 t︱dimensions of the machine ca. m︱
          Universal rotary table grinding machine with movable rotary table and 2 spindles for internal and external cylindrical grinding Very good condition, operating hours according to counter only 7141 ! - Control Siemens Sinumerik 840 D powerline - Axis drives Digital AC servo motors - electron. handwheel - Electro permanent magnet 900 mm with star pole pitch - Working height above rotary table max. 650 mm - Rotatable column by hand ± 180 deg. - Hydraulic weight compensation - Coolant device with paper band filter - Hydrostatic for rotary table with cooler Spindle no.: 1 - External grinding - Grinding wheel diameter 400 x 40 (70) x 127 mm - Motor 11 kW - Speed 1000 - 2250 rpm Spindle no.: 2 - Internal grinding - Spindle diameter 100 x 400 mm - Speed 10.000 rpm - Grinding wheel diameter 150 x 32 x 51 mm - Grinding motor 5.5 kW - Grinding motor speed 1375 - 6000 rpm. Table drive The rotary table is equipped with a large-diameter hydrostatic table bearing. This ensures maximum accuracy. Dressing: 1 permanently installed dresser with MK1 holder enables automatic operation up to a diameter of 1100 mm. The full enclosure of the machine consists of: Cover hood attached to the machine bed with two telescoping tunnel hoods to the left Swing diameter of the workpiece inside the hood 1300 mm
            rotary table diameter 900 mm
            grinding height 650 mm
            grinding head - power requiremen. 11 kW
            Control Siemens 840 D
            swing dia. 1100 mm
            table turning speeds 1 - 100 U/min
            table load 800 kg
            total power requirement 55 kW
            weight of the machine ca. 13 t
            Description :
            Universal rotary table grinding machine with movable rotary table and 2
            spindles for internal and external cylindrical grinding

            Very good condition, operating hours according to counter only 7141 !

            - Control Siemens Sinumerik 840 D powerline
            - Axis drives Digital AC servo motors
            - electron. handwheel
            - Electro permanent magnet 900 mm with star pole pitch
            - Working height above rotary table max. 650 mm
            - Rotatable column by hand ± 180 deg.
            - Hydraulic weight compensation
            - Coolant device with paper band filter
            - Hydrostatic for rotary table with cooler

            Spindle no.: 1 - External grinding
            - Grinding wheel diameter 400 x 40 (70) x 127 mm
            - Motor 11 kW
            - Speed 1000 - 2250 rpm

            Spindle no.: 2 - Internal grinding
            - Spindle diameter 100 x 400 mm
            - Speed 10.000 rpm
            - Grinding wheel diameter 150 x 32 x 51 mm
            - Grinding motor 5.5 kW
            - Grinding motor speed 1375 - 6000 rpm.

            Table drive
            The rotary table is equipped with a large-diameter hydrostatic table bearing.
            This ensures maximum accuracy.

            Dressing:
            1 permanently installed dresser with MK1 holder enables automatic operation
            up to a diameter of 1100 mm.

            The full enclosure of the machine consists of:
            Cover hood attached to the machine bed with two telescoping tunnel hoods
            to the left
            Swing diameter of the workpiece inside the hood 1300 mm
          Datasheet
          Request / Contact

          Surface Grinding Machine - Horizontal

          used  Surface Grinding Machine - Horizontal ABA / ZIERSCH & BALTRUSCH ECOLINE 1206 A


          • Knops Werkzeugmaschinen
          • Konrad-Zuse-Straße 5
          • 40789 Monheim
          • Deutschland

          • 02173 - 39494-0
            02173 - 39494-29
          • maschinen@knops.de
            www.knops.de
          #1022-2252 · Surface Grinding Machine - Horizontal

          ABA / ZIERSCH & BALTRUSCH - ECOLINE 1206 A - - 2008 - SIEMENS LC 200 / TP277

          Technical details
          grinding length 1250 mm︱grinding width 600 mm︱workpiece height mm︱Control SIEMENS LC 200 / TP277 ︱total power requirement kW︱weight of the machine ca. 7,7 t︱dimensions of the machine ca. m︱
          CNC precision, surface and profile grinding machine CNC control SIEMENS LC 200 / TP277 Table load maximum to the magnetic chuck 1200 kg Drives: X-axis drive hydraulic Y and Z-axis drive with servo drive and ball screw measuring system: X-axis rotary with rotary encoder Y and Z axis linear scale traverse paths X axis 1400mm Y axis 600mm Z axis 600mm Grinding length 1250 mm Grinding width 600 Distance between table and spindle center 700 mm Grinding wheel diameter 400 mm Grinding wheel width 100 mm Grinding wheel bore 127 mm
            grinding length 1250 mm
            grinding width 600 mm
            Control SIEMENS LC 200 / TP277
            weight of the machine ca. 7,7 t
            Description :
            CNC precision, surface and profile grinding machine

            CNC control SIEMENS LC 200 / TP277

            Table load maximum to the magnetic chuck 1200 kg
            Drives:
            X-axis drive hydraulic
            Y and Z-axis drive with servo drive and ball screw
            measuring system:
            X-axis rotary with rotary encoder
            Y and Z axis linear scale
            traverse paths
            X axis 1400mm
            Y axis 600mm
            Z axis 600mm
            Grinding length 1250 mm
            Grinding width 600
            Distance between table and spindle center 700 mm

            Grinding wheel diameter 400 mm
            Grinding wheel width 100 mm
            Grinding wheel bore 127 mm
          Datasheet
          Request / Contact
          used  Surface Grinding Machine - Horizontal DANOBAT PSG - 1000


          • Knops Werkzeugmaschinen
          • Konrad-Zuse-Straße 5
          • 40789 Monheim
          • Deutschland

          • 02173 - 39494-0
            02173 - 39494-29
          • maschinen@knops.de
            www.knops.de
          #1022-H08117 · Surface Grinding Machine - Horizontal

          DANOBAT - PSG - 1000 - - 2001 - Fanuc 210i - M

          Technical details
          grinding length 1000 mm︱grinding width 600 mm︱workpiece height 450 mm︱Control Fanuc 210i - M ︱total power requirement 20 kW︱weight of the machine ca. 5,5 t︱dimensions of the machine ca. 3950 x 3150 x 2550 mm︱
          CNC surface grinding machine Clamping area of the table 1000 x 500 mm Clamping surface for magnetic particle board 1000 x 500 mm Largest grinding surface: L x W x H 1000 x 600 x 450 mm Largest distance from table to spindle center 650 mm Table speed in the longitudinal direction 1 - 30 m / min Max. Table load 1500 kg Grinding wheel: diameter x width x bore 400 x 50 x Ø 127 mm Grinding spindle drive 7.5 kW Spindle speed 1500 rpm Connected load 20 kW Space required L x W x H 3950 x 3150 x 2550 mm Weight 5500 kg Equipment CNC control Fanuc 210i - M Electro magnetic plate 1000 x 500 mm Coolant device with paper filter Several Grinding wheels with flanges Digital display Condition machine is in good condition
            grinding length 1000 mm
            grinding width 600 mm
            workpiece height 450 mm
            Control Fanuc 210i - M
            total power requirement 20 kW
            weight of the machine ca. 5,5 t
            dimensions of the machine ca. 3950 x 3150 x 2550 mm
            Description :
            CNC surface grinding machine

            Clamping area of the table 1000 x 500 mm
            Clamping surface for magnetic particle board 1000 x 500 mm
            Largest grinding surface: L x W x H 1000 x 600 x 450 mm
            Largest distance from table to spindle center 650 mm
            Table speed in the longitudinal direction 1 - 30 m / min
            Max. Table load 1500 kg
            Grinding wheel: diameter x width x bore 400 x 50 x Ø 127 mm
            Grinding spindle drive 7.5 kW
            Spindle speed 1500 rpm
            Connected load 20 kW
            Space required L x W x H 3950 x 3150 x 2550 mm
            Weight 5500 kg

            Equipment
            CNC control Fanuc 210i - M
            Electro magnetic plate 1000 x 500 mm
            Coolant device with paper filter
            Several Grinding wheels with flanges
            Digital display

            Condition machine is in good condition
          Datasheet
          Request / Contact
          used  Surface Grinding Machine - Horizontal ROSA LINEA STEEL 13.7


          • Knops Werkzeugmaschinen
          • Konrad-Zuse-Straße 5
          • 40789 Monheim
          • Deutschland

          • 02173 - 39494-0
            02173 - 39494-29
          • maschinen@knops.de
            www.knops.de
          #1022-2254 · Surface Grinding Machine - Horizontal

          ROSA - LINEA STEEL 13.7 - - 2000 - E.C.S. CNC 2401

          Technical details
          grinding length 1500 mm︱grinding width 750 mm︱workpiece height 600 mm︱Control E.C.S. CNC 2401 ︱Table dimensions 1400 x 500 mm︱table load 1700 kg︱dimensions of grinding wheel 400 x 30 x 100 mm︱grinding wheel speed 1450 U/min.︱main drive 11 kW︱table speeds 1 - 40 m/min︱cross feeds: 0 - 4 m/min︱dimensions of machine 5350 x 3100 x 2415 mm︱total power requirement kW︱weight of the machine ca. 9,4 t︱dimensions of the machine ca. m︱
          CNC surface grinding machine in very good condition The machine can be demonstrated under power Equipment: - CNC control E.C.S. CNC 2401 System III - Magnetic plate 1400 x 500 mm - Coolant device with paper band filter Accesories: Machine shoes / fixators Machine documentation Various new spare parts, including coolant pump, grinding wheel with flange, guideway covers, electronics assembly, etc.
            grinding length 1500 mm
            grinding width 750 mm
            workpiece height 600 mm
            Control E.C.S. CNC 2401
            Table dimensions 1400 x 500 mm
            table load 1700 kg
            dimensions of grinding wheel 400 x 30 x 100 mm
            grinding wheel speed 1450 U/min.
            main drive 11 kW
            table speeds 1 - 40 m/min
            cross feeds: 0 - 4 m/min
            dimensions of machine 5350 x 3100 x 2415 mm
            weight of the machine ca. 9,4 t
            Description :
            CNC surface grinding machine in very good condition
            The machine can be demonstrated under power

            Equipment:
            - CNC control E.C.S. CNC 2401 System III
            - Magnetic plate 1400 x 500 mm
            - Coolant device with paper band filter

            Accesories:
            Machine shoes / fixators
            Machine documentation
            Various new spare parts, including coolant pump,
            grinding wheel with flange, guideway covers,
            electronics assembly, etc.
          Datasheet
          Request / Contact

          Surface Grinding Machine - Vertical

          used  Surface Grinding Machine - Vertical REFORM AR 52 Typ 19 CNC


          • Knops Werkzeugmaschinen
          • Konrad-Zuse-Straße 5
          • 40789 Monheim
          • Deutschland

          • 02173 - 39494-0
            02173 - 39494-29
          • maschinen@knops.de
            www.knops.de
          #1022-2278 · Surface Grinding Machine - Vertical

          REFORM - AR 52 Typ 19 CNC - - 2005 - Siemens 840 D

          Technical details
          grinding length 5200 mm︱grinding width 1300 mm︱workpiece height 320 mm︱Control Siemens 840 D ︱main drive 306 kW︱total power requirement 380 kW︱weight of the machine ca. t︱dimensions of the machine ca. 11,21 x 3,2 x 3,85 m︱
          CNC production surface grinding machine with segment head Grinding length 5200 mm Grinding width 1300 mm Workpiece height 320 mm Control Siemens 840 D Passage width 1300 mm Grinding height 320 mm Grinding motor 306 kW Grinding motor speeds up to 320 rpm Grinding motor feed, infinitely variable 0.5-35 m/min Grinding motor infeed in steps of 0.002-1 mm Grinding motor infeed continuously stepless upto 5 mm/min Space requirement approx. 11.21 x 3.2 x 3.85 m Including accessories. - Coolant system - Magnetic clamping device - Switch cabinet - Oil mist extraction - Documentation Dimensions (length x width x height): Bed: 11200 x 2400 x 1600 mm, weight 28000 kg Grinding head: 3000 x 2500 x 3100 mm, weight approx. 14000 kg 2 x oil mist extraction: 1200 x 800 x 2000 mm each Control panel: 1200 x 800 x 2400 mm Small control cabinet: 1400 x 1400 x 800 mm 2 x gears 1200 x 800 x 500 mm each 2 x Euro pallets with grinding segment Control cabinet: 1600 x 800 x 2000 mm Control cabinet: 3400 x 600 x 2400 mm
            grinding length 5200 mm
            grinding width 1300 mm
            workpiece height 320 mm
            Control Siemens 840 D
            main drive 306 kW
            total power requirement 380 kW
            dimensions of the machine ca. 11,21 x 3,2 x 3,85 m
            Description :
            CNC production surface grinding machine with segment head

            Grinding length 5200 mm
            Grinding width 1300 mm
            Workpiece height 320 mm
            Control Siemens 840 D
            Passage width 1300 mm
            Grinding height 320 mm
            Grinding motor 306 kW
            Grinding motor speeds up to 320 rpm
            Grinding motor feed, infinitely variable 0.5-35 m/min
            Grinding motor infeed in steps of 0.002-1 mm
            Grinding motor infeed continuously stepless upto 5 mm/min
            Space requirement approx. 11.21 x 3.2 x 3.85 m


            Including accessories.
            - Coolant system
            - Magnetic clamping device
            - Switch cabinet
            - Oil mist extraction
            - Documentation

            Dimensions (length x width x height):
            Bed: 11200 x 2400 x 1600 mm, weight 28000 kg
            Grinding head: 3000 x 2500 x 3100 mm, weight approx. 14000 kg
            2 x oil mist extraction: 1200 x 800 x 2000 mm each
            Control panel: 1200 x 800 x 2400 mm
            Small control cabinet: 1400 x 1400 x 800 mm
            2 x gears 1200 x 800 x 500 mm each
            2 x Euro pallets with grinding segment
            Control cabinet: 1600 x 800 x 2000 mm
            Control cabinet: 3400 x 600 x 2400 mm
          Datasheet
          Request / Contact
          used  Surface Grinding Machine - Vertical REFORM AR 42 Typ 19 CNC


          • Knops Werkzeugmaschinen
          • Konrad-Zuse-Straße 5
          • 40789 Monheim
          • Deutschland

          • 02173 - 39494-0
            02173 - 39494-29
          • maschinen@knops.de
            www.knops.de
          #1022-2276 · Surface Grinding Machine - Vertical

          REFORM - AR 42 Typ 19 CNC - - 2001 - SIEMENS 840 D

          Technical details
          grinding length 4200 mm︱grinding width 1300 mm︱workpiece height 550 mm︱Control SIEMENS 840 D ︱magnetic clamping plate 4200 x 1300 mm︱segment head diameter 1400 mm︱grinding motor turning speeds up to 320 U/min.︱grinding motor 306 kW︱weight of the machine ca. 50,0 t︱dimensions of the machine ca. m︱
          Segment dimensions: 120/106 x 41 x 250 mm Number of segments: 1 set = 26 pieces Grinding motor feed: 0.5 - 35 m/min, infinitely variable Grinding motor feed: - in steps: 0.002 - 1 mm continuous: up to 5 mm/min. infinitely variable Equipment: * CNC-control SIEMENS Sinumerik 840 D * Automatic hydr. swivelling of the grinding motor from hollow to cross grinding * NC-controlled adjustment of the Marposs measuring head by means of precision support. - new grinding dimensions can be entered into the control, whereby the the grinding head automatically adjusts to the corresponding height. * Dresser with adjustment axis in the machine bed * Coolant system * Electro-magnetic table * Switch cabinet * Oil mist extraction * Documentation Dimensions (length x width x height) Bed: 11800x2200x1400 mm, weight 27500 kg Grinding head: 3000 x 2500 x 3100 mm, estimated weight 14 t 2 x Oil mist extraction: 1200 x 800 x 2000 mm each Control panel: 1200 x 800 x 400 mm Small control cabinet: 1400 x 1400 x 800 mm 2 x gears each 1200 x 800 x 500 mm Control cabinet: 1600 x 800 x 2000 mm Control cabinet: 3400 x 600 x 2400 mm
            grinding length 4200 mm
            grinding width 1300 mm
            workpiece height 550 mm
            Control SIEMENS 840 D
            magnetic clamping plate 4200 x 1300 mm
            segment head diameter 1400 mm
            grinding motor turning speeds up. 320 U/min.
            grinding motor 306 kW
            weight of the machine ca. 50,0 t
            Description :
            Segment dimensions: 120/106 x 41 x 250 mm
            Number of segments: 1 set = 26 pieces
            Grinding motor feed: 0.5 - 35 m/min, infinitely variable
            Grinding motor feed:
            - in steps: 0.002 - 1 mm
            continuous: up to 5 mm/min. infinitely variable

            Equipment:
            * CNC-control SIEMENS Sinumerik 840 D
            * Automatic hydr. swivelling of the grinding motor from hollow to cross grinding
            * NC-controlled adjustment of the Marposs measuring head by means of precision
            support.
            - new grinding dimensions can be entered into the control, whereby the
            the grinding head automatically adjusts to the corresponding height.
            * Dresser with adjustment axis in the machine bed
            * Coolant system
            * Electro-magnetic table
            * Switch cabinet
            * Oil mist extraction
            * Documentation

            Dimensions (length x width x height)
            Bed: 11800x2200x1400 mm, weight 27500 kg
            Grinding head: 3000 x 2500 x 3100 mm, estimated weight 14 t
            2 x Oil mist extraction: 1200 x 800 x 2000 mm each
            Control panel: 1200 x 800 x 400 mm
            Small control cabinet: 1400 x 1400 x 800 mm
            2 x gears each 1200 x 800 x 500 mm
            Control cabinet: 1600 x 800 x 2000 mm
            Control cabinet: 3400 x 600 x 2400 mm
          Datasheet
          Request / Contact

          Tool Grinder - Universal

          used  Tool Grinder - Universal EWAG Ewamatic


          • Knops Werkzeugmaschinen
          • Konrad-Zuse-Straße 5
          • 40789 Monheim
          • Deutschland

          • 02173 - 39494-0
            02173 - 39494-29
          • maschinen@knops.de
            www.knops.de
          #1022-2205 · Tool Grinder - Universal

          EWAG - Ewamatic - - 1997 - NUM 1060

          Technical details
          max. grinding diameter - mm︱grinding length - mm︱workpiece length - mm︱Control NUM 1060 ︱weight of the machine ca. 4,2 t︱dimensions of the machine ca. 2850 x 2525 x 2867 mm︱
          6-axes CNC Tool Grinding Machine. CNC control NUM 1060 The machine has a standard software package (grinding software, oscillation, dressing software and measuring software) and is programmed in DIN/ISO code. Travels: Cross axis X 360 mm Height adjustment Y 150 mm Infeed axis Z 230 mm Swivelling axis B +/-120 deg. Tilt axis A: -15...+25 deg. Dividing attachment with cylindrical grinding mode W20 clamping variant (C-axis 1000 rpm) 6-station turret grinding head tiltable: Grinding spindle Ø 80 mm, number 6, arranged in a star shape Grinding wheels Ø max. 250 mm Grinding spindle drive 7.5 kW, speed 12000 rpm. Measuring station 3D - swiveling - without probe Dressing device for automatic dressing of diamond and CBN grinding wheels Coolant equipment Without oil-mist extractor, grinding wheels and without robot.
            max. grinding diameter - mm
            grinding length - mm
            workpiece length - mm
            Control NUM 1060
            weight of the machine ca. 4,2 t
            dimensions of the machine ca. 2850 x 2525 x 2867 mm
            Description :
            6-axes CNC Tool Grinding Machine.

            CNC control NUM 1060
            The machine has a standard software package (grinding software, oscillation,
            dressing software and measuring software) and is programmed in DIN/ISO code.

            Travels:
            Cross axis X 360 mm
            Height adjustment Y 150 mm
            Infeed axis Z 230 mm
            Swivelling axis B +/-120 deg.
            Tilt axis A: -15...+25 deg.
            Dividing attachment with cylindrical grinding mode W20 clamping variant (C-axis
            1000 rpm)
            6-station turret grinding head tiltable:
            Grinding spindle Ø 80 mm, number 6, arranged in a star shape
            Grinding wheels Ø max. 250 mm
            Grinding spindle drive 7.5 kW, speed 12000 rpm.
            Measuring station 3D - swiveling - without probe
            Dressing device for automatic dressing of diamond and CBN grinding wheels
            Coolant equipment

            Without oil-mist extractor, grinding wheels and without robot.
          Datasheet
          Request / Contact
          used  Tool Grinder - Universal EWAG Ewamatic


          • Knops Werkzeugmaschinen
          • Konrad-Zuse-Straße 5
          • 40789 Monheim
          • Deutschland

          • 02173 - 39494-0
            02173 - 39494-29
          • maschinen@knops.de
            www.knops.de
          #1022-2223 · Tool Grinder - Universal

          EWAG - Ewamatic - - 1996 - NUM 1060

          Technical details
          max. grinding diameter - mm︱grinding length - mm︱workpiece length - mm︱Control NUM 1060 ︱weight of the machine ca. 4,2 t︱dimensions of the machine ca. 2850 x 2525 x 2867 mm︱
          6-axes CNC Tool Grinding Machine. CNC control NUM 1060 The machine has a standard software package (grinding software, oscillation, dressing software and measuring software) and is programmed in DIN/ISO code. Travels: Cross axis X 360 mm Height adjustment Y 150 mm Infeed axis Z 230 mm Swivelling axis B +/-120 deg. Tilt axis A: -15...+25 deg. Dividing attachment with cylindrical grinding mode W20 clamping variant (C-axis 1000 rpm) 6-station turret grinding head tiltable: Grinding spindle Ø 80 mm, number 6, arranged in a star shape Grinding wheels Ø max. 250 mm Grinding spindle drive 7.5 kW, speed 12000 rpm. Measuring station 3D - swiveling - without probe Dressing device for automatic dressing of diamond and CBN grinding wheels Coolant equipment Without oil-mist extractor, grinding wheels and without robot.
            max. grinding diameter - mm
            grinding length - mm
            workpiece length - mm
            Control NUM 1060
            weight of the machine ca. 4,2 t
            dimensions of the machine ca. 2850 x 2525 x 2867 mm
            Description :
            6-axes CNC Tool Grinding Machine.

            CNC control NUM 1060
            The machine has a standard software package (grinding software, oscillation,
            dressing software and measuring software) and is programmed in DIN/ISO code.

            Travels:
            Cross axis X 360 mm
            Height adjustment Y 150 mm
            Infeed axis Z 230 mm
            Swivelling axis B +/-120 deg.
            Tilt axis A: -15...+25 deg.
            Dividing attachment with cylindrical grinding mode W20 clamping variant (C-axis
            1000 rpm)
            6-station turret grinding head tiltable:
            Grinding spindle Ø 80 mm, number 6, arranged in a star shape
            Grinding wheels Ø max. 250 mm
            Grinding spindle drive 7.5 kW, speed 12000 rpm.
            Measuring station 3D - swiveling - without probe
            Dressing device for automatic dressing of diamond and CBN grinding wheels
            Coolant equipment

            Without oil-mist extractor, grinding wheels and without robot.
          Datasheet
          Request / Contact
          used  Tool Grinder - Universal SCHÜTTE WU 50


          • Knops Werkzeugmaschinen
          • Konrad-Zuse-Straße 5
          • 40789 Monheim
          • Deutschland

          • 02173 - 39494-0
            02173 - 39494-29
          • maschinen@knops.de
            www.knops.de
          #1022-2299 · Tool Grinder - Universal

          SCHÜTTE - WU 50 - - 1980 -

          Technical details
          max. grinding diameter 260 mm︱grinding length 500 mm︱workpiece length 500 mm︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱
          Very well preserved universal tool grinding machine in particular suitable for all types of cutting tools. Workspace: Center height above table 115 mm Center width 720 mm Largest grinding diameter 260 mm Maximum grinding length 500 mm Largest clamping diameter 260 mm Maximum clamping length 500 mm Table: Clamping surface 1120 x 112 mm Largest longitudinal movement 520 mm Adjustability across 270 mm Adjustability vertically 300 mm Can be swiveled to 2 sides by 180° each Grinding spindle: The spindle head can be swiveled 360° Min./max. Distance from the center of the grinding spindle to the top edge of the table 70 / 370 mm Can be swiveled to a twist angle of 60°-0°-60° Can be swiveled to a clearance angle of 15°-0°-15° Grinding wheel: Largest diameter 175 mm Largest width 16 mm Bore 13+20 mm Recording diameter 20 mm Flange diameter 60 mm Please note the enclosed pictures with the extensive accessories, the suction device and the complete machine documentation.
            max. grinding diameter 260 mm
            grinding length 500 mm
            workpiece length 500 mm
            Description :
            Very well preserved universal tool grinding machine in particular
            suitable for all types of cutting tools.

            Workspace:
            Center height above table 115 mm
            Center width 720 mm
            Largest grinding diameter 260 mm
            Maximum grinding length 500 mm
            Largest clamping diameter 260 mm
            Maximum clamping length 500 mm

            Table:
            Clamping surface 1120 x 112 mm
            Largest longitudinal movement 520 mm
            Adjustability across 270 mm
            Adjustability vertically 300 mm
            Can be swiveled to 2 sides by 180° each

            Grinding spindle:
            The spindle head can be swiveled 360°
            Min./max. Distance from the center of the grinding spindle to the top edge of
            the table 70 / 370 mm
            Can be swiveled to a twist angle of 60°-0°-60°
            Can be swiveled to a clearance angle of 15°-0°-15°

            Grinding wheel:
            Largest diameter 175 mm
            Largest width 16 mm
            Bore 13+20 mm
            Recording diameter 20 mm
            Flange diameter 60 mm

            Please note the enclosed pictures with the extensive accessories,
            the suction device and the complete machine documentation.
          Datasheet
          Request / Contact

          Double-Column Presse

          used  Double-Column Presse EXNER EXSBR 200


          • Knops Werkzeugmaschinen
          • Konrad-Zuse-Straße 5
          • 40789 Monheim
          • Deutschland

          • 02173 - 39494-0
            02173 - 39494-29
          • maschinen@knops.de
            www.knops.de
          #1022-E06222 · Double-Column Presse

          EXNER - EXSBR 200 - - 1991 -

          Technical details
          pressure 200 t︱distance between columns - mm︱stroke - mm︱table surface area 2000 x 800 mm︱total power requirement kW︱weight of the machine ca. 31 t︱dimensions of the machine ca. m︱
          Drive power 55 / 4 kW Tracking travel 28 mm Safety distance 155 mm Tracking travel time 97 ms Oil filling 1200 liters
            pressure 200 t
            distance between columns - mm
            stroke - mm
            table surface area 2000 x 800 mm
            weight of the machine ca. 31 t
            Description :
            Drive power 55 / 4 kW
            Tracking travel 28 mm
            Safety distance 155 mm
            Tracking travel time 97 ms
            Oil filling 1200 liters
          Datasheet
          Request / Contact

          Four Column Press - Hydraulic

          used  Four Column Press - Hydraulic R+S Technik


          • Knops Werkzeugmaschinen
          • Konrad-Zuse-Straße 5
          • 40789 Monheim
          • Deutschland

          • 02173 - 39494-0
            02173 - 39494-29
          • maschinen@knops.de
            www.knops.de
          #1022-E06135 · Four Column Press - Hydraulic

          R+S Technik - - - 2013 -

          Technical details
          pressure 200 t︱table surface area 2100 x 1400 mm︱passage width 2122 mm︱total power requirement 60 kW︱weight of the machine ca. 35 t︱dimensions of the machine ca. m︱
          Press/punch with injection molding unit 200 ton punch upstroke press with injection molding machine (400to) Additional guard locking via 4 power strokes Manufacturer: R+S Technik Year of construction: 2013 / rebuild 2016 Mains voltage/frequency: 400V/50Hz 3~(N/PE Connected load: 60KW Weight about 35000kg
            pressure 200 t
            table surface area 2100 x 1400 mm
            passage width 2122 mm
            total power requirement 60 kW
            weight of the machine ca. 35 t
            Description :
            Press/punch with injection molding unit

            200 ton punch upstroke press with injection molding machine (400to)
            Additional guard locking via 4 power strokes
            Manufacturer: R+S Technik
            Year of construction: 2013 / rebuild 2016
            Mains voltage/frequency: 400V/50Hz 3~(N/PE
            Connected load: 60KW
            Weight about 35000kg
          Datasheet
          Request / Contact

          Hydr. pressbrake

          used  Hydr. pressbrake HÄMMERLE AP200-3100


          • Knops Werkzeugmaschinen
          • Konrad-Zuse-Straße 5
          • 40789 Monheim
          • Deutschland

          • 02173 - 39494-0
            02173 - 39494-29
          • maschinen@knops.de
            www.knops.de
          #1022-H08822 · Hydr. pressbrake

          HÄMMERLE - AP200-3100 - - 1986/2011 retrofit - Addcobend Infinitron

          Technical details
          pressure 200 t︱chamfer lenght 3100 mm︱distance between columns 2780 mm︱Control Addcobend Infinitron ︱total power requirement kW︱weight of the machine ca. 18 t︱dimensions of the machine ca. m︱
          CNC control: Addcobend Infinitron Press force: 2000 KN Bending length: 3100 mm Distance between columns 2780 mm Clear distance between columns 2780 mm Projection of the stands 300 mm Back gauge - adjustable 1600 mm Stroke max. 400 mm Space required length 4300 mm Space requirement width 2650 mm Total height 3800mm Total weight about 18000 kg Machine hours 2011: 21226 h Machine hours today: approx. 23000-25000h Retrofit: 2011: approx. CHF 86,000 • Basic remodeling • Exchange Axodyn controller units (X & M axis) • Replacement of control relays and Telemecanique PLCs with safety PLCs • Replacement of power relays and thermal overcurrent trips • Double foot switch with additional function • Angle adapter for hand station suspension • Grid connection 2013: CHF 27,000 • 3D bendview post processor • 3D Bendview retrofit package • Exchange 3.5» floppy drive for USB interface • Software and License • 3D bend viewer software Tools included: 1. 001-002 sword stamp 3 meters 2. 7 matrix almost 3 meters 3. 12 matrix 3 meters 4. 16 matrix 3 meters 5. Possibly an embossing tool 3 meters
            pressure 200 t
            chamfer lenght 3100 mm
            distance between columns 2780 mm
            Control Addcobend Infinitron
            weight of the machine ca. 18 t
            Description :
            CNC control: Addcobend Infinitron
            Press force: 2000 KN
            Bending length: 3100 mm
            Distance between columns 2780 mm
            Clear distance between columns 2780 mm
            Projection of the stands 300 mm
            Back gauge - adjustable 1600 mm
            Stroke max. 400 mm
            Space required length 4300 mm
            Space requirement width 2650 mm
            Total height 3800mm
            Total weight about 18000 kg

            Machine hours 2011: 21226 h
            Machine hours today: approx. 23000-25000h

            Retrofit:
            2011: approx. CHF 86,000
            • Basic remodeling
            • Exchange Axodyn controller units (X & M axis)
            • Replacement of control relays and Telemecanique PLCs with safety PLCs
            • Replacement of power relays and thermal overcurrent trips
            • Double foot switch with additional function
            • Angle adapter for hand station suspension
            • Grid connection

            2013: CHF 27,000
            • 3D bendview post processor
            • 3D Bendview retrofit package
            • Exchange 3.5» floppy drive for USB interface
            • Software and License
            • 3D bend viewer software

            Tools included:
            1. 001-002 sword stamp 3 meters
            2. 7 matrix almost 3 meters
            3. 12 matrix 3 meters
            4. 16 matrix 3 meters
            5. Possibly an embossing tool 3 meters
          Datasheet
          Request / Contact

          Plate Bending Machine - 3 Rolls

          used  Plate Bending Machine  - 3 Rolls SCHAEFER SRMVQ


          • Knops Werkzeugmaschinen
          • Konrad-Zuse-Straße 5
          • 40789 Monheim
          • Deutschland

          • 02173 - 39494-0
            02173 - 39494-29
          • maschinen@knops.de
            www.knops.de
          #1022-H06661 · Plate Bending Machine - 3 Rolls

          SCHAEFER - SRMVQ - - 1975 -

          Technical details
          sheet width 3000 mm︱plate thickness 40 mm︱pre-bending 30 ︱total power requirement kW︱weight of the machine ca. 45 t︱dimensions of the machine ca. 8,4 x 2,6 x 3,7 m︱
          Machine in good condition. PREBENDING DOUBLE . Maximum bending length 3.000 mm . Bending capacity 40 mm . Prebending capacity 30 mm . Top roll diameter 590 mm . Bending rolls diameter 490 mm . Main motor 45 kW . Bending motor 30 kW . Digital readout in all axis . Approximate weight 45 t . Approximate dimenssion.: . Length: 8.400 mm . Width: 2.600 mm . Height: 3.700 mm . Trench height: 1.780 mm
            sheet width 3000 mm
            plate thickness 40 mm
            pre-bending 30
            weight of the machine ca. 45 t
            dimensions of the machine ca. 8,4 x 2,6 x 3,7 m
            Description :
            Machine in good condition.

            PREBENDING DOUBLE

            . Maximum bending length 3.000 mm
            . Bending capacity 40 mm
            . Prebending capacity 30 mm
            . Top roll diameter 590 mm
            . Bending rolls diameter 490 mm
            . Main motor 45 kW
            . Bending motor 30 kW
            . Digital readout in all axis
            . Approximate weight 45 t
            . Approximate dimenssion.:
            . Length: 8.400 mm
            . Width: 2.600 mm
            . Height: 3.700 mm
            . Trench height: 1.780 mm
          Datasheet
          Request / Contact
          •   
          •   
          • 1  
          • 2  
          • 3  
          • 4  
          •   
          •   

          Knops Werkzeugmaschinen GmbH  &  Co. KG  40789 - Monheim Konrad-Zuse-Straße 5 Deutschland
          Knops Werkzeugmaschinen GmbH & Co. KG

          Konrad-Zuse-Straße 5



          Contact Trader


            Knops Werkzeugmaschinen GmbH & Co. KG
           Konrad-Zuse-Straße 5
            40789 - Monheim
            Deutschland
            02173 - 39494-0
            02173 - 39494-29
            maschinen@knops.de
            www.knops.de
            Contact person:

           




          Machine category


          4-Säulenpresse - Hydraulisch · Abkantpresse - hydraulisch · Aufspanntisch · Aufspannwinkel · Bearbeitungszentrum - Horizontal · Bearbeitungszentrum - Universal · Bearbeitungszentrum - Vertikal · Blechrundbiegemaschine - 3 Walzen · Blechrundbiegemaschine - 4 Walzen · Brennschneidemaschine · CNC Dreh- und Fräszentrum · Doppelständerpresse - Hydraulisch · Drehbarer Aufspanntisch · Drehmaschine - zyklengesteuert · Fahrständerfräsmaschine · Fixatoren · Flachschleifmaschine - Doppelständer · Flachschleifmaschine - Horizontal · Flachschleifmaschine - Vertikal · Fräseinrichtung · Innenschleifmaschine · Karusselldrehmaschine - Doppelständer · Koordinatenmessmaschine · Kühlmittelanlage · Lagertechnik · Leit- und Zugspindeldrehmaschine · Magnetspannplatte · Messmaschine · Plan- und Spitzendrehbank · Planscheibe · Plattenbohrwerk - Traghülse · Portal - Bearbeitungszentrum · Portalfräsmaschine · Roboter - Handling · Rundschleifmaschine - Außen · Rundtaktmaschine · Rundtisch · Rundtischflachschleifmaschine - 2 Spind. · Schleifmaschinenzubehör · Schweißdrehtisch - rund · Schwerdrehmaschine · Senkerodiermaschine · Tafelschere - hydraulisch · Tieflochbohrmaschine · Werkzeug Voreinstellgerät · Werkzeugfräsmaschine - Universal · Werkzeughalter · Werkzeugschleifmaschine - Universal · Zahnrad-Abwälzfräsmaschine - vertikal · Zahnradschleifmaschine · Zubehör · Ölnebel-Abscheider ·