saw blade diameter 350 mm︱dimensions of saw-blade 350 x 3.4 x 32 mm︱turning speeds 1700 / 3400 U/min︱capacity 90 degrees: round 120 mm︱capacity 90 degrees: square 105 x 105 mm︱capacity 90 degrees: flat 180 x 70 mm︱capacity 45 degrees: round 110 mm︱capacity 45 degrees: square 95 x 95 mm︱capacity 45 degrees: flat 135 x 60 mm︱total power requirement 1.5 / 2.2 kW︱weight of the machine ca. 530 kg.︱range L-W-H 2000 x 1500 x 1700 mm︱

---

** Machine from a workshop for the disabled ** good condition (!!) Furnishing : - fully automatic aluminum circular sawing machine - with input of section length and number of pieces - swiveling control panel, right front - Miter adjustment 45° left/right - pneumatic material clamping (horizontal+vertical) - programmable feed carriage - Micro spray device (oiler) - Machine base, with forklift pockets - original instruction manual * Machine link: https://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9164095 * Machinevideo : https://www.youtube.com/watch?v=XQqvY6g9Y6U

cutting range 300 mm︱capacity 90 degrees: flat 330 x 260 mm︱capacity 90 degrees: square 260 x 260 mm︱capacity 45 degrees: round 260 mm︱capacity 45 degrees: flat 270 x 200 mm︱capacity 45 degrees: square 250 mm︱capacity 60 degrees: round 180 mm︱capacity 60 degrees: flat 170 x 170 mm︱capacity 60 degrees: square 180 mm︱automatic feeds 9999,9 mm︱feed minimum 2 mm︱cutting diameter minimum 5 mm︱band speed 15 - 100 m/min︱vice 340 mm Öffnung︱dimensions of saw-band 3650 x 27 x 0,9 mm︱total power requirement 2,2 kW︱weight 1240 kg︱range L-W-H 1800 x 1900 x 1750 mm︱

---

Furnishing: - Fully automatic electro-hydraulic band saw - with additional semi-automatic function, for cuts from 0° to 60° left - Windows “CE” based MEP 50 control and 7” touch screen display * Simple and quick setting of all machine parameters * with additional soft keys + backlit display * 10 programs each with a maximum of 9999 pieces and a maximum length of 9999 mm - Material feed with stepper motor via ball screw * Single stroke 600mm repeatable to saw any length * Accuracy of ±0.1/600mm - Feeder with protective cover and safety limit switch - Precise adjustment of the cutting feed in mm/min - Positioning of the saw head and movement of the feeder using a joystick - Automatic detection of the start of the cut - Large deflection pulleys, adjustable made of cast steel - Saw band tension with band tension control and display on the display - Carbide band guides for maximum cutting precision - Automatic monitoring of cutting load - Vice with quick adjustment * with replaceable clamping and stop jaws - Large chip tray and coolant container that can be pulled out to the side * Equipped with 2 electric pumps for lubrication and cooling of the saw band * Coolant gun for cleaning the machine - Chip clearing brush for cleaning the saw band - User manual EN Info from the manufacturer: When installing this saw in the network Residual current circuit breaker (FI) should this all-current sensitive and not under 300 mA.

cutting range 300 mm︱capacity 90 degrees: flat 330 x 260 mm︱capacity 90 degrees: square 260 x 260 mm︱capacity 45 degrees: round 260 mm︱capacity 45 degrees: flat 270 x 200 mm︱capacity 45 degrees: square 250 mm︱capacity 60 degrees: round 180 mm︱capacity 60 degrees: flat 170 x 170 mm︱capacity 60 degrees: square 180 mm︱automatic feeds 9999,9 mm︱feed minimum 2 mm︱cutting diameter minimum 5 mm︱band speed 15 - 100 m/min︱vice 340 mm Öffnung︱dimensions of saw-band 3650 x 27 x 0,9 mm︱total power requirement 2,2 kW︱weight 1240 kg︱range L-W-H 1800 x 1900 x 1750 mm︱

---

Furnishing: - Fully automatic electro-hydraulic band saw - with additional semi-automatic function, for cuts from 0 ° to 60 ° left - Windows “CE” based MEP 50 control and 7 ”touch screen display - Material feed with stepper motor via recirculating ball screw - 600 mm repeatable single stroke to cut any length - Feeder with protective cover and safety limit switch - Positioning of the saw head and movement of the feeder using the joystick - Automatic recognition of the start of the cut - Electronic strap tension control - Automatic monitoring of the cutting load - Removable coolant pan * (equipped with 2 electric pumps for lubrication and cooling of the saw band) - Instructions DE

cutting diameter 300 mm︱capacity 90 degrees: flat 330 x 260 mm︱capacity 90 degrees: square 260 x 260 mm︱capacity 45 degrees: round 260 mm︱capacity 45 degrees: flat 270 x 200 mm︱capacity 60 degrees: round 180 mm︱capacity 60 degrees: flat 170 x 170 mm︱height of material-table 600 mm︱Pitch min/max 50.000 mm︱vice 335 mm Öffnung︱band speed 15 - 100 m/min︱automatic feeds 600 mm︱dimensions of saw-band 3650 x 27 x 0,9 mm︱total power requirement 2,2 kW︱weight 1.105 kg︱range L-W-H 3,3 x 2,83 x 2,23 m︱

---

Electro-hydraulic fully automatic band saw, with additional: * semi-automatic * semi-automatic dynamic * manual operation Description : - Automatic cycle (cuts from 0 ° to 60 ° left) - Semi-automatic, semi-automatic-dynamic and manual cycle - Cuts from 45 ° right to 60 ° left - Manual or semi-automatic dynamic cycle - to make cuts without programming - Numerically controlled band saw machines - with the new, specially developed by MEP for automatic machines Windows “CE” based control - User interface with 7 ”touch screen display and mechanical buttons for the operational functions of the sawing machine, guarantees reliable peration, simple and intuitive, and real-time control of all cutting parameters. - Protective housing for the safety of the worker - The control console on a swivel arm allows a comfortable and safe operation from any position - Display and entry of alarm and error messages with the option of report the incidents that have occurred. - Stepless regulation of the cutting speed from 15 to 100 m / min Frequency converter (inverter). - The latest generation of hydraulic power packs, extremely powerful with little Power consumption. - Material feed with stepper motor via ball screw, which on opposite ball bearing is mounted; Single stroke 600 mm repeatable to saw any length. - Positioning of the saw head and movement of the feeder using the joystick. - Automatic detection of the cutting start position - Manually operated strap tension control with indication on the display by means of electronic converter - Automatic monitoring of the cutting load through a directly on the Cylinder mounted servo valve - The coolant pan (provided with 2 electric pumps for lubrication and Cooling of the saw band) is built into the underframe - The chip drawer can be replaced by a motorized chip conveyor - see special accessories - Preparation for the installation of the OPTIONAL minimum quantity lubrication system together with the conventional standard lubrication with emulsion oil. - Chip removal brush - Bimetal saw band for solid and profile material - Tools and instructions for use with a list of spare parts

cutting diameter 300 mm︱capacity 90 degrees: flat 330 x 260 mm︱capacity 90 degrees: square 260 x 260 mm︱capacity 45 degrees: round 260 mm︱capacity 45 degrees: flat 270 x 200 mm︱capacity 60 degrees: round 180 mm︱capacity 60 degrees: flat 170 x 170 mm︱height of material-table 600 mm︱Pitch min/max 50.000 mm︱vice 335 mm Öffnung︱band speed 15 - 100 m/min︱automatic feeds 600 mm︱dimensions of saw-band 3650 x 27 x 0,9 mm︱total power requirement 2,2 kW︱weight 1.105 kg︱range L-W-H 3,3 x 2,83 x 2,23 m︱

---

Electro-hydraulic fully automatic band saw, with additional: * semi-automatic * semi-automatic dynamic * manual operation Description : - Automatic cycle (cuts from 0 ° to 60 ° left) - Semi-automatic, semi-automatic-dynamic and manual cycle - Cuts from 45 ° right to 60 ° left - Manual or semi-automatic dynamic cycle - to make cuts without programming - Numerically controlled band saw machines - with the new, specially developed by MEP for automatic machines Windows “CE” based control - User interface with 7 ”touch screen display and mechanical buttons for the operational functions of the sawing machine, guarantees reliable peration, simple and intuitive, and real-time control of all cutting parameters. - Protective housing for the safety of the worker - The control console on a swivel arm allows a comfortable and safe operation from any position - Display and entry of alarm and error messages with the option of report the incidents that have occurred. - Stepless regulation of the cutting speed from 15 to 100 m / min Frequency converter (inverter). - The latest generation of hydraulic power packs, extremely powerful with little Power consumption. - Material feed with stepper motor via ball screw, which on opposite ball bearing is mounted; Single stroke 600 mm repeatable to saw any length. - Positioning of the saw head and movement of the feeder using the joystick. - Automatic detection of the cutting start position - Manually operated strap tension control with indication on the display by means of electronic converter - Automatic monitoring of the cutting load through a directly on the Cylinder mounted servo valve - The coolant pan (provided with 2 electric pumps for lubrication and Cooling of the saw band) is built into the underframe - The chip drawer can be replaced by a motorized chip conveyor - see special accessories - Preparation for the installation of the OPTIONAL minimum quantity lubrication system together with the conventional standard lubrication with emulsion oil. - Chip removal brush - Bimetal saw band for solid and profile material - Tools and instructions for use with a list of spare parts