European network of stockholding machinery dealers

Bitte einen Suchbegriff eingeben - Please enter a search term
Category:
    Manufacturer:
      Machines:
        Trader:

          2 side planer

          Machinelist: 2 side planer


          2 side planer

          used Window production: wood 2 side planer WEINIG Uniplan


          • Engelfried Maschinentechnik GmbH
          • Elisabethenstr. 41
          • 73432 Aalen
          • Deutschland

          • (0049)07361-98660
            (0049)07361-986640
          • info@engelfried.com
            www.engelfried.com
          #1305-2234 · 2 side planer

          WEINIG - Uniplan - - -

          Technical details

          used Window production: wood 2 side planer WEINIG Uniplan 23


          • Engelfried Maschinentechnik GmbH
          • Elisabethenstr. 41
          • 73432 Aalen
          • Deutschland

          • (0049)07361-98660
            (0049)07361-986640
          • info@engelfried.com
            www.engelfried.com
          #1305-6744 · 2 side planer

          WEINIG - Uniplan 23 - - gebraucht -

          Technical details

          Weinig hydraulic planer type Uniplan 23 -------------------------------------------------- ------------------ For double-sided horizontal woodworking with 2 working shafts. Spindle arrangement: horizontal below and above. The two horizontal spindles have hydraulically tensioned counter bearings provided, without axial adjustment. Built-in straight jointers on both spindles with automatic block delivery, can be remotely controlled when the hood is closed. Machine with continuous, chainless feed, equipped with rubber rollers. Electrical high-low adjustment of the spindles according to mechanical digital readout (SIKO). On switch to limit the high-low adjustment. feed roller pressure pneumatic. Stops and table tops not adjustable. machine with steel table tops. Machine with full paneling and integrated noise and dust protection incl. interior lighting. Electrical design according to DIN VDE 0113, electrical equipment from industrial machines EN 60204, IEC-204-1. Other electrical regulations are not taken into account. Machine including operating tools, but without processing tools. The spindles of the Weinig Uniplan work with a speed of 7200 Revolutions per minute. Before using the available tools, please check whether these are suitable for the speed. Please also note this Ordering new tools. Technical specifications Working width max.: 230 mm Working height min.: 15 mm, max.: 120 mm Feed: 3 kW (4HP) Horizontal spindles each: 5.5 kW (7.5 HP) Feed speed, stepless: 6 - 36 m/min. Spindle speed: 7,200 rpm Spindle diameter: 50mm Tool clamping length: 240 mm Tool flight circle max.: 163 mm Fixed instep reduction below: 0.5 mm Special equipment: Braking system for feed up to 5.5 KW (7.5 HP) Spindle brakes, mechanical up to 7.5 kW 1. Infeed roller clocked with photo cell. (technical data according to the manufacturer - without guarantee!)
            Description :
            Weinig hydraulic planer type Uniplan 23
            -------------------------------------------------- ------------------

            For double-sided horizontal woodworking with 2 working shafts.
            Spindle arrangement: horizontal below and above.

            The two horizontal spindles have hydraulically tensioned counter bearings
            provided, without axial adjustment. Built-in straight jointers on both spindles
            with automatic block delivery, can be remotely controlled when the hood is
            closed.

            Machine with continuous, chainless feed, equipped with rubber rollers.
            Electrical high-low adjustment of the spindles according to mechanical digital
            readout
            (SIKO).
            On switch to limit the high-low adjustment. feed roller pressure
            pneumatic. Stops and table tops not adjustable. machine with
            steel table tops.

            Machine with full paneling and integrated noise and dust protection incl.
            interior lighting.

            Electrical design according to DIN VDE 0113, electrical equipment from
            industrial machines
            EN 60204, IEC-204-1.

            Other electrical regulations are not taken into account.

            Machine including operating tools, but without processing tools.

            The spindles of the Weinig Uniplan work with a speed of 7200
            Revolutions per minute. Before using the available tools, please check
            whether these are suitable for the speed. Please also note this
            Ordering new tools.

            Technical specifications

            Working width max.: 230 mm
            Working height min.: 15 mm, max.: 120 mm
            Feed: 3 kW (4HP)
            Horizontal spindles each: 5.5 kW (7.5 HP)
            Feed speed, stepless: 6 - 36 m/min.
            Spindle speed: 7,200 rpm
            Spindle diameter: 50mm
            Tool clamping length: 240 mm
            Tool flight circle max.: 163 mm
            Fixed instep reduction below: 0.5 mm

            Special equipment:

            Braking system for feed up to 5.5 KW (7.5 HP)
            Spindle brakes, mechanical up to 7.5 kW
            1. Infeed roller clocked with photo cell.

            (technical data according to the manufacturer - without guarantee!)
          used Window production: wood 2 side planer WEINIG Uniplan 23


          • Engelfried Maschinentechnik GmbH
          • Elisabethenstr. 41
          • 73432 Aalen
          • Deutschland

          • (0049)07361-98660
            (0049)07361-986640
          • info@engelfried.com
            www.engelfried.com
          #1305-2680 · 2 side planer

          WEINIG - Uniplan 23 - - gebraucht -

          Technical details

          Weinig hydraulic planer type Uniplan 23 -------------------------------------------------- Machne in checking process at the moment For double-sided horizontal woodworking with 2 working shafts. Spindle arrangement: horizontal below and above. The two horizontal spindles have hydraulically tensioned counter bearings provided, without axial adjustment. Built-in straight jointers on both spindles with automatic block delivery, can be remotely controlled when the hood is closed. Machine with continuous, chainless feed, equipped with rubber rollers. Electrical high-low adjustment of the spindles according to mechanical digital readout (SIKO). On switch to limit the high-low adjustment. feed roller pressure pneumatic. Stops and table tops not adjustable. machine with steel table tops. Machine with full paneling and integrated noise and dust protection incl. interior lighting. Electrical design according to DIN VDE 0113, electrical equipment from industrial machines EN 60204, IEC-204-1. Other electrical regulations are not taken into account. Machine including operating tools, but without processing tools. The spindles of the Weinig Uniplan work with a speed of 7200 Revolutions per minute. Before using the available tools, please check whether these are suitable for the speed. Please also note this Ordering new tools. Technical specifications Working width max.: 230 mm Working height min.: 15 mm, max.: 120 mm Feed: 3 kW (4HP) Horizontal spindles each: 5.5 kW (7.5 HP) Feed speed, stepless: 6 - 36 m/min. Spindle speed: 7,200 rpm Spindle diameter: 50mm Tool clamping length: 240 mm Tool flight circle max.: 163 mm Fixed instep reduction below: 0.5 mm Special equipment: Braking system for feed up to 5.5 KW (7.5 HP) Spindle brakes, mechanical up to 7.5 kW 1. Infeed roller clocked with photo cell. (technical data according to the manufacturer - without guarantee!)
            Description :
            Weinig hydraulic planer type Uniplan 23
            --------------------------------------------------
            Machne in checking process at the moment

            For double-sided horizontal woodworking with 2 working shafts.
            Spindle arrangement: horizontal below and above.

            The two horizontal spindles have hydraulically tensioned counter bearings
            provided, without axial adjustment. Built-in straight jointers on both spindles
            with automatic block delivery, can be remotely controlled when the hood is
            closed.

            Machine with continuous, chainless feed, equipped with rubber rollers.
            Electrical high-low adjustment of the spindles according to mechanical digital
            readout
            (SIKO).
            On switch to limit the high-low adjustment. feed roller pressure
            pneumatic. Stops and table tops not adjustable. machine with
            steel table tops.

            Machine with full paneling and integrated noise and dust protection incl.
            interior lighting.

            Electrical design according to DIN VDE 0113, electrical equipment from
            industrial machines
            EN 60204, IEC-204-1.

            Other electrical regulations are not taken into account.

            Machine including operating tools, but without processing tools.

            The spindles of the Weinig Uniplan work with a speed of 7200
            Revolutions per minute. Before using the available tools, please check
            whether these are suitable for the speed. Please also note this
            Ordering new tools.

            Technical specifications

            Working width max.: 230 mm
            Working height min.: 15 mm, max.: 120 mm
            Feed: 3 kW (4HP)
            Horizontal spindles each: 5.5 kW (7.5 HP)
            Feed speed, stepless: 6 - 36 m/min.
            Spindle speed: 7,200 rpm
            Spindle diameter: 50mm
            Tool clamping length: 240 mm
            Tool flight circle max.: 163 mm
            Fixed instep reduction below: 0.5 mm

            Special equipment:

            Braking system for feed up to 5.5 KW (7.5 HP)
            Spindle brakes, mechanical up to 7.5 kW
            1. Infeed roller clocked with photo cell.

            (technical data according to the manufacturer - without guarantee!)
          •   
          •   
          • 1  

            Trader Profile:   Engelfried Maschinentechnik GmbH

          Contact Trader



            Engelfried Maschinentechnik GmbH
           Elisabethenstr. 41
            73432 - Aalen
            Deutschland
            (0049)07361-98660">(0049)07361-98660
            (0049)07361-986640
            info@engelfried.com
            www.engelfried.com

          Profile of Trader

          Company Gebrüder Engelfried oHG
          Elisabethenstrasse 41
          73432 Aalen-Unterkochen
          Germany
           Tel. +49 (7361) 9866-0 Werner and Florian Engelfried
           Tel. +49 (7361) 9866-0 Florian Engelfried
           kom. 0602392773 Marian Grzeszkiewicz
           Teл.: +49 (7361) 9866-19 Кирилл Суппес

          Fax.: +49 (7361) 8431 
          info(at)engelfried.com

          Exhibition and warehouse: 
          Gewerbegebiet 
          Kapellenweg 25 
          73447 Oberkochen
          Germany 
          Tel. +49 (7364) 919323




          TOP Manufacturer:

          Engelfried Maschinentechnik GmbH   73432 - Aalen Elisabethenstr. 41 Deutschland
          Engelfried Maschinentechnik GmbH

          Elisabethenstr. 41



          Contact Trader


            Engelfried Maschinentechnik GmbH
           Elisabethenstr. 41
            73432 - Aalen
            Deutschland
            (0049)07361-98660
            (0049)07361-986640
            info@engelfried.com
            www.engelfried.com
            Contact person:

           





          Machine category


          Abrichthobelmaschine · Band- und Profilschleifmaschine · Bandsäge · Beschlagcenter · Bohr- und Dübeleintreibmaschine · Breitbandschleifmaschine · Clipsetzer fuer Holz-Alufenster · CNC-Bearbeitungszentrum · CNC-Bearbeitungszentrum Fenster u. Türen · Dickenhobelmaschine · Doppelgehrungssäge · Dreh- und Kipptisch · Ecklager- und Olivenbohrmaschine · Entstauber · Fensteranlage · Fensterlackieranlage · Fensterwerkzeuge · Formatkreissäge · Fräsmaschine · Furnierklebegerät · Furnierpresse · Füge- und Feinschnittmaschine · Glasleistensäge · Kantenschleifmaschine · Kapp- und Gehrungssäge · Keilzinkenanlage · Klammergeräte · Kombinierte Abricht- und Dickenhobelmasc · Kommissionswagen · Kompressor · Kreuzsprossenfräse · Lamellierpresse · Leimauftragsmaschine · Leimgerät · Längskreissäge · Längsschnittkreissäge · Minizinkenpresse · Montagestation · Olivenbohrmaschine · Optimierungskappsäge · Plattensägen vertikal · Profilwagen · Rahmen- und Langlochbohrmaschine · Rahmenpresse · Rollenbahn · Rundbogenfräsgeräte · Schleifmaschine · Schwenkfräsmaschine · Transportanlage · Transportwagen · Umfälzautomat · Universal-Dübellochbohrmaschine · Untertischkappsäge · Verglasungs- und Kontrollpresse · Verleimstern · Vierseitenhobelmaschine · Werkstückrückführung · Werkzeug-Reinigungsgeräte · Zapfenschneid- und Schlitzmaschine · Zerspanen ·