Other Accessories for Machine Tools
Machinelist: Other Accessories for Machine Tools
Clamping Chuck
- Zuefle GmbH
- Levi-Strauss-Str. 121
- 97232 Giebelstadt
- Deutschland
-
+49 (0)9334-978608-0
+49 (0)9334-978608-2 -
info@zuefle.com
www.zuefle.com
#1139-00421 · Clamping Chuck
SMW / EMAG - KRS-NZ-250-3-A6 - - - konventionell
Technical details
SMW / EMAG shaft power chuck Fmax = 73kN n = 3500rpm KRS-NZ-250-3-A6 ID 60839 unused in original packaging weight 80kg You can come and inspect the article at our warehouse in Giebelstadt about 80min. from FRANKFURT AIRPORT.
Coolant Unit
- Zuefle GmbH
- Levi-Strauss-Str. 121
- 97232 Giebelstadt
- Deutschland
-
+49 (0)9334-978608-0
+49 (0)9334-978608-2 -
info@zuefle.com
www.zuefle.com
#1139-00260 · Coolant Unit
STEMKE - SK 7000 - - 2011 -
Technical details
We offer a temperature control solution for injection- and die-casting tools. This tool cooler is from German manufacturer STEMKE type SK 7000. It allows plastic molds of larger dimensions with up to 8900 W cooling capacity can be greatly cooled down and thus will reduce the cycle times will strongly. The offered facility in light blue color is from the year 2011 and in good condition. The control of the system is carried out via a touchscreen on separate stand. Before reusing this equipment, the seals of system must be changed by refrigeration technician. To the device can additional hose connections be included. A complete documentation and operating instructions etc. are available. As a refrigerant is used R404A. Come to a visit to Giebelstadt, about 80 min. from FRANKFURT airport.
Guarded
- Zuefle GmbH
- Levi-Strauss-Str. 121
- 97232 Giebelstadt
- Deutschland
-
+49 (0)9334-978608-0
+49 (0)9334-978608-2 -
info@zuefle.com
www.zuefle.com
#1139-00394 · Guarded
HITZESCHUTZTUCH - Glasfaser - - - konventionell
Technical details
HEAT PROTECTION CLOTH 1 roll glass fiber fiber 900mm x 1.25mm x approx.50m silicate 1250g/m² Currently there are 3 pieces in stock. You can come and inspect the article at our warehouse in Giebelstadt about 80min. from FRANKFURT AIRPORT.
High-frequency-spindle
- Zuefle GmbH
- Levi-Strauss-Str. 121
- 97232 Giebelstadt
- Deutschland
-
+49 (0)9334-978608-0
+49 (0)9334-978608-2 -
info@zuefle.com
www.zuefle.com
#1139-10060 · High-frequency-spindle
JUKOMET - 60606003 - - 2005 -
Technical details
High frequency workpiece spindle unit Junkomet 4-pin Type: mW10.6/12-4-28/58r0 speed up to 11,650 rev/min Spindle no. 060606003 Used, very good condition
Hydraulic Pumps Unit
- Zuefle GmbH
- Levi-Strauss-Str. 121
- 97232 Giebelstadt
- Deutschland
-
+49 (0)9334-978608-0
+49 (0)9334-978608-2 -
info@zuefle.com
www.zuefle.com
#1139-00306 · Hydraulic Pumps Unit
VAG - RIKO DN600 PN10 - - 2011 -
Technical details
We quote an unused and original packed Ring Piston Valve Plunger of brand VAG and type RIKO DN600 PN10 including AUMA drive motor. There are the following technial datas: Plunger Valve RIKO DN600 PN10 with AUMA gearbox of type GS100.3-F16-N Vers. LL i=208:1 Tein=57Nm Taus =4000Nm Fett F15 Temp -40…+80°C WA-Nr. 91160941/010.1 max. 50°C AKZ: VF 15 S 0001 AS5 weight ca. 1000kg YOP 2011 unused, in best condition Come for inspection to our storage nearby Würzburg/Germany, about 80min. from FFrankfurt airport.
Lynette
- Zuefle GmbH
- Levi-Strauss-Str. 121
- 97232 Giebelstadt
- Deutschland
-
+49 (0)9334-978608-0
+49 (0)9334-978608-2 -
info@zuefle.com
www.zuefle.com
#1139-00418 · Lynette
SMW AUTOBLOK - - - - konventionell
Technical details
SMW AUTOBLOK self-centering bezel clamping range approx. 8 - 90mm roller width 25mm rollers Ø 47mm serial number 381 with large mounting flange clamping distance approx. 550mm featuring holding device used weight 195kg without hydraulic hoses no nameplate visible possibly under the mounting flange You can come and inspect the article at our warehouse in Giebelstadt about 80min. from FRANKFURT AIRPORT.
Motor
- Zuefle GmbH
- Levi-Strauss-Str. 121
- 97232 Giebelstadt
- Deutschland
-
+49 (0)9334-978608-0
+49 (0)9334-978608-2 -
info@zuefle.com
www.zuefle.com
#1139-10055 · Motor
BOSCH - Servomotor SD B5. - - 2001 -
Technical details
BOSCH Brushless Servo Motor permanent-magnet LORENZ shaping machine used for D-and C-axis Manufacturer: BOSCH Industrial Equipment Erbach Made in Germany Stockno 104-913769 Type SD-01000 B5.250.020 MO 25NM IO 17.2 A J25, 4 10 kgm ² ³ n max 2000min-1 L 15 mH IP 54 Rmin 20k ? PN 5.25 kW R 0.752 ? RK 3.65 ? VDE 0530 I.CL.F 100K UT mV/min1 2.7 Condition: used not tested
- Zuefle GmbH
- Levi-Strauss-Str. 121
- 97232 Giebelstadt
- Deutschland
-
+49 (0)9334-978608-0
+49 (0)9334-978608-2 -
info@zuefle.com
www.zuefle.com
#1139-00388 · Motor
SIEMENS - Synchron-Servomotor 1FT7046-5A - - - konventionell
Technical details
SIEMENS SIMOTICS synchronous servo motor 1FT7046-5AH71-1FH1 nmax= 9000rpm nN= 4,500rpm M0=7Nm MN = 2.4Nm UiN= 257VWith encoder AM22DQ A45 IP65 BRAKE 24VDC 14.1W outer flange ring diameter 80mm Shaft diameter 19mm x 40mm length unused Weight 12kg You can come and inspect the article at our warehouse in Giebelstadt about 80min. from FRANKFURT AIRPORT.
Pumping Set
- Zuefle GmbH
- Levi-Strauss-Str. 121
- 97232 Giebelstadt
- Deutschland
-
+49 (0)9334-978608-0
+49 (0)9334-978608-2 -
info@zuefle.com
www.zuefle.com
#1139-00353 · Pumping Set
SETTIMA - GR90S-SMT16B-1500L - - 2018 - konventionell
Technical details
SETTIMA / REXROTH / SIEMENS 30kW screw pump GR90S-SMT16B-1500L nominal output 1200l/min discharge at 2,750rpm approx. 1424l/min at 1450rpm approx. 750l/min Mineral oil pump ran for 600 hours for test purposes Year of construction 2018 immaculate condition with stainless steel tub fixated with vibration damper applied on a mineral oil Shell Tellus 46 with SIEMENS motor 1CV1205B 1LE15922AB521JB4 380V 50Hz 60A 30kW 1500rpm 220V 50Hz 105A 30kW 1500rpm 440V 60Hz 58A 34.5kW 1800rpm 380V 88Hz 97A 48kW 26510rpm Nmax. = 4200rpm IP55 REXROTH type ABPSA-GR90S-SMT16B-1500L 200L 004D458A Intake Ø 120mm Discharge Ø 70mm Dimensions 200x90x85cm Used Weight 454kg Original price in 2018 approx. €45,000 Currently there are still three pumping sets available. You can come and inspect the article at our warehouse in Giebelstadt about 80min. from FRANKFURT AIRPORT.
- Zuefle GmbH
- Levi-Strauss-Str. 121
- 97232 Giebelstadt
- Deutschland
-
+49 (0)9334-978608-0
+49 (0)9334-978608-2 -
info@zuefle.com
www.zuefle.com
#1139-00453 · Pumping Set
HAMMELMANN - 55kW 09.14072.2089 - - 2015 -
Technical details
HAMMELMANN - 55kW high pressure pump - max. pressure 590bar - Flow rate 50l/min - Piston Ø 30mm - Speed 1500rpm - Permissible temperature max. 60°C - Machine no. B5.01072.2260 - Order no. 09.14072.2089 - Year of construction 2015 - used in good condition - Weight 227kg We currently have 2 of this type in stock. Come for a viewing.
- Zuefle GmbH
- Levi-Strauss-Str. 121
- 97232 Giebelstadt
- Deutschland
-
+49 (0)9334-978608-0
+49 (0)9334-978608-2 -
info@zuefle.com
www.zuefle.com
#1139-00376 · Pumping Set
HERMETIC - CNF 80-315 - - 1992 - konventionell
Technical details
HERMETIC PUMPS / LOHER Canned motor pump Stator with 70m³/h for fluid handled DEIONAT (desalinated water) Type CNF 80-315 Impeller diameter 275mm Engine type CKPX 85Y-2 380V 50Hz 172A 380V Nominal pressure 12bar IP64/67 2950rpm Design overpressure -1/12bar Final pump overpressure 9.8 bar Design temperature 200C liquid temp. max. 100°C Pump material 1.4552/1.4408 Dimensions LxWxH approx. 110x45x80cm Flange diameter left 460mm DN200 with 8 screw holes Flange diameter right 400mm DN200 with 16 screw holes IP64/67unused Weight approx. 550kg Year of construction 1992 unused You can come and inspect the article at our warehouse in Giebelstadt about 80min. from FRANKFURT AIRPORT.
- Zuefle GmbH
- Levi-Strauss-Str. 121
- 97232 Giebelstadt
- Deutschland
-
+49 (0)9334-978608-0
+49 (0)9334-978608-2 -
info@zuefle.com
www.zuefle.com
#1139-00427 · Pumping Set
ZIEHL-ABEGG - HYZT.160.29-2 - - - konventionell
Technical details
ZIEHL-ABEGG 40kW motor for screw pump HYZT.160.29-2 380V 50Hz design type IMB15 n=2800rpm In=95A IA=105A MN=137Nm MA=81Nm IP00 total length 50cm screw-on area 37x33cm hole spacing 32x25cm shaft Ø 32mm x 80mm length flange Ø 30cm with 26cm hole spacing hub Ø 30mm weight 92kg unused You can come and inspect the article at our warehouse in Giebelstadt about 80min. from FRANKFURT AIRPORT.
Rotary Table
- Zuefle GmbH
- Levi-Strauss-Str. 121
- 97232 Giebelstadt
- Deutschland
-
+49 (0)9334-978608-0
+49 (0)9334-978608-2 -
info@zuefle.com
www.zuefle.com
#1139-00444 · Rotary Table
MADER - RSE-K-6-4-R-P - - 2008 - konventionell
Technical details
MADER rotary indexing unit size 6 Item No. 246840 Serial no. 8V 216186 RSE-K-6-4-R-P table Ø 180mm height 65mm flange surface 180x180mm drill hole spacing 154mm connection R 1/8" control electro-pneumatic drive compressed air 5-8bar weight 8.5kg unused in original packaging You can come and inspect the article at our warehouse in Giebelstadt about 80min. from FRANKFURT AIRPORT.
- Zuefle GmbH
- Levi-Strauss-Str. 121
- 97232 Giebelstadt
- Deutschland
-
+49 (0)9334-978608-0
+49 (0)9334-978608-2 -
info@zuefle.com
www.zuefle.com
#1139-00383 · Rotary Table
FIBRO - NC 2.01.0160.0.1.04.02 - - 2001 - konventionell
Technical details
FIBRO NC rotary table 3-fold NC 2.01.0160.0.1.04.02 with 3x NC 2.01.0160.0.1.00.00 Weight 250kg Clamping surface 86x22cm Height 27cm drive shaft diameter 25mm dividing heads flange diameter 140mm spindle shafts diameter 24mm Year of construction 2001 used very good condition You can come and inspect the article at our warehouse in Giebelstadt about 80min. from FRANKFURT AIRPORT.
Spare Parts
- Zuefle GmbH
- Levi-Strauss-Str. 121
- 97232 Giebelstadt
- Deutschland
-
+49 (0)9334-978608-0
+49 (0)9334-978608-2 -
info@zuefle.com
www.zuefle.com
#1139-10057 · Spare Parts
INDEX - Z1 Achse / G300 - - 2007 -
Technical details
Precision Ball Screws for INDEX G300 Z1 Axis Typ: D40x10x1616 Nr. 1143013.20 Typ-Nr. W4011G-37PY-C5Z10 07M7-0014 M7-54
- Zuefle GmbH
- Levi-Strauss-Str. 121
- 97232 Giebelstadt
- Deutschland
-
+49 (0)9334-978608-0
+49 (0)9334-978608-2 -
info@zuefle.com
www.zuefle.com
#1139-10056 · Spare Parts
STEINMEYER - Kugelrollspindel INDEX G300 - - 2006 -
Technical details
New Precision Ball Screws for INDEX G300 Z2 axis NO. 114003.20 Type No. 141.260/10.40.852.1174 T3P D40x10x1174 Condition: NEW
- Zuefle GmbH
- Levi-Strauss-Str. 121
- 97232 Giebelstadt
- Deutschland
-
+49 (0)9334-978608-0
+49 (0)9334-978608-2 -
info@zuefle.com
www.zuefle.com
#1139-00417 · Spare Parts
KTR ROTEX - GR170 - - - konventionell
Technical details
KTR ROTEX elastic claw coupling with hub GR170 external Ø 170mm removable pilot hole with bore Ø 24mm without groove hub Ø125mm 3 piece steel coupling GGG total length 190mm weight 17.4kg unused Currently there are 3 pieces in stock. You can come and inspect the article at our warehouse in Giebelstadt about 80min. from FRANKFURT AIRPORT.
Trader Profile: Zuefle GmbH
Contact Trader
Levi-Strauss-Str. 121
97232 - Giebelstadt
Deutschland
+49 (0)9334-978608-0">+49 (0)9334-978608-0
+49 (0)9334-978608-2
info@zuefle.com
www.zuefle.com
Profile of Trader
Since 1995 we are mainly active in the domain of gear technique. As a representative for manufacturers of gear producing machines, gear testing machines and tooling, we have received intensive knowledge in all technologies and part dimensions.
Interested in customer specifications, we will search for the most economic solutions for producing gears. We like the unusual, the innovative and the vision.
Today the ZÜFLE GmbH is trading of modernized and second hand gear machines. Additional we supply also machine tools in good condition. On our shop you can find also much tooling.
We invite you to inspect machines and tooling in our stock in Würzburg, which is about 1h away from Frankfurt airport.
In this homepage you can find actual quotes, technical datas and pictures of all machine tools
Contact us for questions by email info@zuefle.com or by tel. +49-9334-9786080.
Please see for yourself, that beside best machines and tools, service is our most important product.
Dipl.-Ing. Dietmar Züfle
Office & Warehouse
Züfle GmbH
Levi-Strauss-Str. 121
D-97232 Giebelstadt
+49 (0) 9334-978608-0
+49 (0) 9334-978608-2
TOP Manufacturer:
UNBEKANNT - NN - - SIEMENS - AUFSPANNPLATTE - RÖHM - GERD WOLFF - SAP - SIEGMUND - WMT -
Levi-Strauss-Str. 121
Contact Trader
Levi-Strauss-Str. 121
97232 - Giebelstadt
Deutschland
+49 (0)9334-978608-0
+49 (0)9334-978608-2
info@zuefle.com
www.zuefle.com
Contact person: