European network of stockholding machinery dealers

Bitte einen Suchbegriff eingeben - Please enter a search term
Category:
    Manufacturer:
      Machines:
        Trader:

          Flanging and Seam Rolling Machine

          Machinelist: Flanging and Seam Rolling Machine


          Flanging and Seam Rolling Machine

          used Sheet metal working / shaeres / bending Flanging and Seam Rolling Machine BENDMAK SW 125 man.


          • SKM Industriemaschinen
          • Röntgenstr. 3
          • 89264 Weißenhorn
          • Deutschland

          • +49 (0) 7309 954 986 0
            +49 (0) 7309 954 986 1
          • info@skm-maschinen.de
            www.skm-maschinen.de
          #2032-1044 · Flanging and Seam Rolling Machine

          BENDMAK - SW 125 man. - - 2018 -

          Technical details
          plate thickness 1,25 mm︱Shank diameter 26 mm︱weight of the machine ca. 50 kg︱
          Sheet thickness: 1.25 mm Roller shaft color: 62 mm Roller center distance: 250 mm Shaft-Ø: 26 Throat Depth: 260 mm Dimensions of the Machine: Length: 600 mm Height: 550 mm Width: 350 mm Weight: about 50 kg incl. standard rolls
            plate thickness 1,25 mm
            Shank diameter 26 mm
            weight of the machine ca. 50 kg
            Description :
            Sheet thickness: 1.25 mm
            Roller shaft color: 62 mm
            Roller center distance: 250 mm
            Shaft-Ø: 26
            Throat Depth: 260 mm

            Dimensions of the Machine:
            Length: 600 mm
            Height: 550 mm
            Width: 350 mm

            Weight: about 50 kg

            incl. standard rolls


        • SKM Industriemaschinen
        • Röntgenstr. 3
        • 89264 Weißenhorn
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Flanging and Seam Rolling Machine SAHINLER IK 0,8 man.


          • SKM Industriemaschinen
          • Röntgenstr. 3
          • 89264 Weißenhorn
          • Deutschland

          • +49 (0) 7309 954 986 0
            +49 (0) 7309 954 986 1
          • info@skm-maschinen.de
            www.skm-maschinen.de
          #2032-1041 · Flanging and Seam Rolling Machine

          SAHINLER - IK 0,8 man. - - 2017 -

          Technical details
          plate thickness 0,8 mm︱0 52 mm︱weight of the machine ca. 30 kg︱
          Producer: Sahinler Type: IK 0,8 YOM: new Shaft Length: 110 mm Bordering Capacity: 0,8 mm Roll-Ø: 52 mm Throat Depth: 80 mm Dimensions of the Machine (LxWxH): 380 x 180 x 380 mm Weight: 30 kg Additional information: • Cast iron heavy duty main frame • Forward-backward adjustable sheet support • Easy to carry for workshops • Forward-backward adjustable bottom shaft • Rolls shafts are special steel material • 7 set of rolls standard
            plate thickness 0,8 mm
            0 52 mm
            weight of the machine ca. 30 kg
            Description :
            Producer: Sahinler
            Type: IK 0,8
            YOM: new
            Shaft Length: 110 mm
            Bordering Capacity: 0,8 mm
            Roll-Ø: 52 mm
            Throat Depth: 80 mm
            Dimensions of the Machine (LxWxH): 380 x 180 x 380 mm
            Weight: 30 kg


            Additional information:

            • Cast iron heavy duty main frame

            • Forward-backward adjustable sheet support

            • Easy to carry for workshops

            • Forward-backward adjustable bottom shaft

            • Rolls shafts are special steel material

            • 7 set of rolls standard


        • SKM Industriemaschinen
        • Röntgenstr. 3
        • 89264 Weißenhorn
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Flanging and Seam Rolling Machine SAHINLER IK 1,2 man.


          • SKM Industriemaschinen
          • Röntgenstr. 3
          • 89264 Weißenhorn
          • Deutschland

          • +49 (0) 7309 954 986 0
            +49 (0) 7309 954 986 1
          • info@skm-maschinen.de
            www.skm-maschinen.de
          #2032-1042 · Flanging and Seam Rolling Machine

          SAHINLER - IK 1,2 man. - - 2017 -

          Technical details
          plate thickness 1,2 mm︱0 62 mm︱weight of the machine ca. 50 kg︱
          Producer: Sahinler Type: IK 1,2 YOM: new Shaft Length: 140 mm Bordering Capacity: 1,2 mm Roll-Ø: 62 mm Throat Depth: 100 mm Dimensions of the Machine (LxWxH): 560 x 220 x 500 mm Weight: 50 kg Additional information: • Cast iron heavy duty main frame • Forward-backward adjustable sheet support • Easy to carry for workshops • Forward-backward adjustable bottom shaft • Rolls shafts are special steel material • 7 set of rolls standard
            plate thickness 1,2 mm
            0 62 mm
            weight of the machine ca. 50 kg
            Description :
            Producer: Sahinler
            Type: IK 1,2
            YOM: new
            Shaft Length: 140 mm
            Bordering Capacity: 1,2 mm
            Roll-Ø: 62 mm
            Throat Depth: 100 mm

            Dimensions of the Machine (LxWxH): 560 x 220 x 500 mm
            Weight: 50 kg


            Additional information:

            • Cast iron heavy duty main frame

            • Forward-backward adjustable sheet support

            • Easy to carry for workshops

            • Forward-backward adjustable bottom shaft

            • Rolls shafts are special steel material

            • 7 set of rolls standard


        • SKM Industriemaschinen
        • Röntgenstr. 3
        • 89264 Weißenhorn
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Flanging and Seam Rolling Machine STUeCKMANN & HILLEN UBS 63


          • Kurt Steiger Werkzeugmaschinen GmbH
          • Flachstr. 11
          • 65197 Wiesbaden
          • Deutschland

          • +49 (0) 611/421047
            +49 (0) 611/421040
          • info@kurt-steiger.de
            www.kurt-steiger.de
          #2043-26555 · Flanging and Seam Rolling Machine

          STUeCKMANN & HILLEN - UBS 63 - - 1988 -

          Technical details
          plate thickness mm︱roll diameter mm︱total power requirement kW︱weight of the machine ca. t︱required space m︱
          metal sheet thickness: 1,6 mm
          spindle distance: 63 mm
          working speed: 3,2 - 16 m/min
          engine: 380 V, 0,75 kW
          space needed: 645 x 250 x 1350 mm
          D2f982f
          weight: 220 kg
            Description :
            metal sheet thickness: 1,6 mm

            spindle distance: 63 mm

            working speed: 3,2 - 16 m/min

            engine: 380 V, 0,75 kW

            space needed: 645 x 250 x 1350 mm

            D2f982f

            weight: 220 kg


        • Kurt Steiger Werkzeugmaschinen GmbH
        • Flachstr. 11
        • 65197 Wiesbaden
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Flanging and Seam Rolling Machine OSTAS KMRP 2,5 man.


          • WMT GmbH & Co.KG
          • Siemensstraße 1
          • 46342 Velen-Ramsdorf
          • Deutschland

          • +49 2863 92477-47
            +49 2863 92477-50
          • info@w-m-t.de
            www.w-m-t.de
          #1108-75303 · Flanging and Seam Rolling Machine

          OSTAS - KMRP 2,5 man. - - -Neu- -

          Technical details
          plate thickness 2,5 mm︱roll diameter 98 mm︱throat 160 mm︱total power requirement 1,5 kW︱weight of the machine ca. 0,35 t︱dimensions of the machine ca. 550x1400x1500 m︱
          Delivered with: • manual version • 4 set of wheels • Foot control • Brake motor • Emergency stop
            plate thickness 2,5 mm
            roll diameter 98 mm
            throat 160 mm
            total power requirement 1,5 kW
            weight of the machine ca. 0,35 t
            dimensions of the machine ca. 550x1400x1500 m
            Description :
            Delivered with:
            • manual version
            • 4 set of wheels
            • Foot control
            • Brake motor
            • Emergency stop


        • WMT GmbH & Co.KG
        • Siemensstraße 1
        • 46342 Velen-Ramsdorf
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Flanging and Seam Rolling Machine OSTAS KMRP 2,5 hydr.


          • WMT GmbH & Co.KG
          • Siemensstraße 1
          • 46342 Velen-Ramsdorf
          • Deutschland

          • +49 2863 92477-47
            +49 2863 92477-50
          • info@w-m-t.de
            www.w-m-t.de
          #1108-75305 · Flanging and Seam Rolling Machine

          OSTAS - KMRP 2,5 hydr. - - -Neu- -

          Technical details
          plate thickness 2,5 mm︱roll diameter 98 mm︱throat 160 mm︱total power requirement 1,5 kW︱weight of the machine ca. 0,35 t︱dimensions of the machine ca. 550x1400x1500 m︱
          Delivered with: • hydraulic version • 4 set of wheels • Foot control • Brake motor • Emergency stop
            plate thickness 2,5 mm
            roll diameter 98 mm
            throat 160 mm
            total power requirement 1,5 kW
            weight of the machine ca. 0,35 t
            dimensions of the machine ca. 550x1400x1500 m
            Description :
            Delivered with:
            • hydraulic version
            • 4 set of wheels
            • Foot control
            • Brake motor
            • Emergency stop


        • WMT GmbH & Co.KG
        • Siemensstraße 1
        • 46342 Velen-Ramsdorf
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Flanging and Seam Rolling Machine WMT RM 8


          • WMT GmbH & Co.KG
          • Siemensstraße 1
          • 46342 Velen-Ramsdorf
          • Deutschland

          • +49 2863 92477-47
            +49 2863 92477-50
          • info@w-m-t.de
            www.w-m-t.de
          #1108-75300 · Flanging and Seam Rolling Machine

          WMT - RM 8 - - - Neu - -

          Technical details
          plate thickness 0,8 mm︱throat 180 mm︱roll diameter mm︱weight of the machine ca. 22 Kg︱dimensions of the machine ca. 500 x 450 x 160 mm︱
          Flanging machine is equipped with: - Emergency switch - Footswitch - 7 pcs. Roll sets
            plate thickness 0,8 mm
            throat 180 mm
            weight of the machine ca. 22 Kg
            dimensions of the machine ca. 500 x 450 x 160 mm
            Description :
            Flanging machine is equipped with:
            - Emergency switch
            - Footswitch
            - 7 pcs. Roll sets


        • WMT GmbH & Co.KG
        • Siemensstraße 1
        • 46342 Velen-Ramsdorf
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Flanging and Seam Rolling Machine OSTAS KMRH-4.0


          • WMT GmbH & Co.KG
          • Siemensstraße 1
          • 46342 Velen-Ramsdorf
          • Deutschland

          • +49 2863 92477-47
            +49 2863 92477-50
          • info@w-m-t.de
            www.w-m-t.de
          #1108-75304 · Flanging and Seam Rolling Machine

          OSTAS - KMRH-4.0 - - - Neu - -

          Technical details
          plate thickness 4 mm︱roll diameter 125 mm︱throat 200 mm︱total power requirement 2,2 kW︱weight of the machine ca. 0,48 t︱dimensions of the machine ca. 1,6 x 0,6 x 1,2 mm︱
          • 5 speeds • With foot control • With brake motor • With emergency stop • With hydraulic roller adjustment • With 4 roller sets
            plate thickness 4 mm
            roll diameter 125 mm
            throat 200 mm
            total power requirement 2,2 kW
            weight of the machine ca. 0,48 t
            dimensions of the machine ca. 1,6 x 0,6 x 1,2 mm
            Description :
            • 5 speeds
            • With foot control
            • With brake motor
            • With emergency stop
            • With hydraulic roller adjustment
            • With 4 roller sets


        • WMT GmbH & Co.KG
        • Siemensstraße 1
        • 46342 Velen-Ramsdorf
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Flanging and Seam Rolling Machine OSTAS KMRP-1,2


          • WMT GmbH & Co.KG
          • Siemensstraße 1
          • 46342 Velen-Ramsdorf
          • Deutschland

          • +49 2863 92477-47
            +49 2863 92477-50
          • info@w-m-t.de
            www.w-m-t.de
          #1108-75302 · Flanging and Seam Rolling Machine

          OSTAS - KMRP-1,2 - - - Neu - -

          Technical details
          plate thickness 1,2 mm︱roll diameter 62 mm︱throat 100 mm︱total power requirement 0,75 kW︱weight of the machine ca. 130 kg︱dimensions of the machine ca. 1,1 x 0,5 x 1,3 m︱
          Flanging machine is equipped with: - Emergency switch - Footswitch - 7 pcs. Roll sets
            plate thickness 1,2 mm
            roll diameter 62 mm
            throat 100 mm
            total power requirement 0,75 kW
            weight of the machine ca. 130 kg
            dimensions of the machine ca. 1,1 x 0,5 x 1,3 m
            Description :
            Flanging machine is equipped with:
            - Emergency switch
            - Footswitch
            - 7 pcs. Roll sets


        • WMT GmbH & Co.KG
        • Siemensstraße 1
        • 46342 Velen-Ramsdorf
        • Deutschland

        • Datasheet
          Request / Contact

          Plate Bending Machine - 4 Rolls

          used Sheet metal working / shaeres / bending Plate Bending Machine -  4 Rolls AKYAPAK AHS 30/86


          • Knops Werkzeugmaschinen
          • Konrad-Zuse-Straße 5
          • 40789 Monheim
          • Deutschland

          • 02173 - 39494-0
            02173 - 39494-29
          • maschinen@knops.de
            www.knops.de
          #1022-E05155 · Plate Bending Machine - 4 Rolls

          AKYAPAK - AHS 30/86 - - Neu / New -

          Technical details
          sheet width 3100 mm︱plate thickness 100 mm︱pre-bending 86 ︱diameter of upper rolls 750 mm︱diameter of lower rolls 700 mm︱side roll diameter 600 mm︱power capacity 132 kW︱min. bending diameter 825 / 2750 mm︱weight of the machine ca. 80 t︱dimensions of the machine ca. 8,0 x 3,1 x 4,1 m︱
          4 Rolls Hydraulic Bending Machine Standard Features: - hardened and polished rolls - complete body made of ST-52 steel - hydraulic powered cover for easy material extracting - 2-axis digital readout for side rolls - top and bottom rolls are driven by hydraulic and gearbox. Bottom rolls vertical movements are hydraulic powered - separate control panel - oil cooler - conic bending - in accordance to CE-norm Optional Accessories: - variable speed of rotation (10.187 Euro) - material feeding table 1000 x 2000 (5.600 Euro) - center support (33.250 Euro) - 2 x side supports (29.000 Euro)
            sheet width 3100 mm
            plate thickness 100 mm
            pre-bending 86
            diameter of upper rolls 750 mm
            diameter of lower rolls 700 mm
            side roll diameter 600 mm
            power capacity 132 kW
            min. bending diameter 825 / 2750 mm
            weight of the machine ca. 80 t
            dimensions of the machine ca. 8,0 x 3,1 x 4,1 m
            Description :
            4 Rolls Hydraulic Bending Machine

            Standard Features:
            - hardened and polished rolls
            - complete body made of ST-52 steel
            - hydraulic powered cover for easy material extracting
            - 2-axis digital readout for side rolls
            - top and bottom rolls are driven by hydraulic and gearbox. Bottom rolls
            vertical movements are hydraulic powered
            - separate control panel
            - oil cooler
            - conic bending
            - in accordance to CE-norm

            Optional Accessories:
            - variable speed of rotation (10.187 Euro)
            - material feeding table 1000 x 2000 (5.600 Euro)
            - center support (33.250 Euro)
            - 2 x side supports (29.000 Euro)



        • Knops Werkzeugmaschinen
        • Konrad-Zuse-Straße 5
        • 40789 Monheim
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Plate Bending Machine -  4 Rolls AKYAPAK AHS 30/32


          • Knops Werkzeugmaschinen
          • Konrad-Zuse-Straße 5
          • 40789 Monheim
          • Deutschland

          • 02173 - 39494-0
            02173 - 39494-29
          • maschinen@knops.de
            www.knops.de
          #1022-E05862 · Plate Bending Machine - 4 Rolls

          AKYAPAK - AHS 30/32 - - Neu / New -

          Technical details
          sheet width 3100 mm︱plate thickness 40 mm︱pre-bending 32 ︱diameter of upper rolls 460 mm︱diameter of lower rolls 420 mm︱side roll diameter 360 mm︱power capacity 30 kW︱min. bending diameter 1380 mm︱weight of the machine ca. 30,1 t︱dimensions of the machine ca. 6,3 x 2,3 x 2,6 m︱
          4 Rolls Hydraulic Bending Machine Standard Features: - hardened and polished rolls - complete body made of ST-52 steel - hydraulically opened/closed drop end controlled from control panel - digital readout for side rolls - top and bottom rolls are driven by hydraulic and gearbox. Bottom rolls vertical movements are hydraulic powered - separate control panel - oil cooler - conic bending - in accordance to CE-norm - Warranty 12 months Optional Accessories: - variable speed of rotation (5.858,00 Euro) - material feeding table (5.100,00 Euro) - center support (18.750,00 Euro) - 2 x side supports (15.000,00 Euro)
            sheet width 3100 mm
            plate thickness 40 mm
            pre-bending 32
            diameter of upper rolls 460 mm
            diameter of lower rolls 420 mm
            side roll diameter 360 mm
            power capacity 30 kW
            min. bending diameter 1380 mm
            weight of the machine ca. 30,1 t
            dimensions of the machine ca. 6,3 x 2,3 x 2,6 m
            Description :
            4 Rolls Hydraulic Bending Machine

            Standard Features:
            - hardened and polished rolls
            - complete body made of ST-52 steel
            - hydraulically opened/closed drop end controlled from control panel
            - digital readout for side rolls
            - top and bottom rolls are driven by hydraulic and gearbox. Bottom rolls
            vertical movements are hydraulic powered
            - separate control panel
            - oil cooler
            - conic bending
            - in accordance to CE-norm
            - Warranty 12 months

            Optional Accessories:
            - variable speed of rotation (5.858,00 Euro)
            - material feeding table (5.100,00 Euro)
            - center support (18.750,00 Euro)
            - 2 x side supports (15.000,00 Euro)



        • Knops Werkzeugmaschinen
        • Konrad-Zuse-Straße 5
        • 40789 Monheim
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Plate Bending Machine -  4 Rolls HESSE by ISITAN 4RH 10x90


          • HESSE+CO Maschinenfabrik GesmbH
          • Straße 4 Objekt 8
          • 2351 Wiener Neudorf
          • Österreich

          • +43/2236/638 70-0
            +43/2236/636 62
          • office@hesse-maschinen.com
            https://www.hesse-maschinen.com
          #1069-2163 · Plate Bending Machine - 4 Rolls

          HESSE by ISITAN - 4RH 10x90 - - -

          Technical details
          neuca. 12 Wochen ab AuftragsTürkei27000 €︱ 548.1 €︱ 1050 mm︱ 2.5 mm︱ 2.5 mm︱ 2 mm︱ 90 mm︱ 4,5 m/min︱ 2.2 kW︱ 2250 mm︱ 1000 mm︱ 1500 mm︱ 900 kg︱
          FOR ROUND AND ELEPTIC SHAPES FOR MASS PRODUCTION (CYCLE UP TO ONLY 20 SEC POSSIBLE) 4 rolls NC control with touchscreen Top roll driven by hydromotor and plantary gearbox Hydraulic drop end Mobile control panel Hardened rolls Operating manual in English or German OPTION: Feeding table price on request
            neu
            ca. 12 Wochen ab Auftrags
            Türkei
            27000 €
            548.1 €
            1050 mm
            2.5 mm
            2.5 mm
            2 mm
            90 mm
            4,5 m/min
            2.2 kW
            2250 mm
            1000 mm
            1500 mm
            900 kg
            Description :
            FOR ROUND AND ELEPTIC SHAPES FOR MASS PRODUCTION (CYCLE UP TO ONLY 20 SEC POSSIBLE)
            4 rolls
            NC control with touchscreen
            Top roll driven by hydromotor and plantary gearbox
            Hydraulic drop end
            Mobile control panel
            Hardened rolls
            Operating manual in English or German

            OPTION:
            Feeding table price on request


        • HESSE+CO Maschinenfabrik GesmbH
        • Straße 4 Objekt 8
        • 2351 Wiener Neudorf
        • Österreich

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Plate Bending Machine -  4 Rolls HESSE by ISITAN 4R HMS 1550x130


          • HESSE+CO Maschinenfabrik GesmbH
          • Straße 4 Objekt 8
          • 2351 Wiener Neudorf
          • Österreich

          • +43/2236/638 70-0
            +43/2236/636 62
          • office@hesse-maschinen.com
            https://www.hesse-maschinen.com
          #1069-1540 · Plate Bending Machine - 4 Rolls

          HESSE by ISITAN - 4R HMS 1550x130 - - -

          Technical details
          neuca. 12 Wochen ab AuftragsTürkei23000 €︱ 471.5 €︱ 1550 mm︱ 4.5 mm︱ 4.5 mm︱ 3.5 mm︱ 4.5 mm︱ 3.5 mm︱ 3.5 mm︱ 2.5 mm︱ 130 mm︱ 130 mm︱ 130 mm︱ 5 m/min︱ 2,2 + 1,1 kW︱ 3300 mm︱ 1150 mm︱
          motorized roller drive upper and lower roller driven hydraulic side roll feed 3 digital displays hydraulic folding bearings hardened rollers conical bending device user manual in GERMAN or ENGLISH
            neu
            ca. 12 Wochen ab Auftrags
            Türkei
            23000 €
            471.5 €
            1550 mm
            4.5 mm
            4.5 mm
            3.5 mm
            4.5 mm
            3.5 mm
            3.5 mm
            2.5 mm
            130 mm
            130 mm
            130 mm
            5 m/min
            2,2 + 1,1 kW
            3300 mm
            1150 mm
            Description :
            motorized roller drive
            upper and lower roller driven
            hydraulic side roll feed
            3 digital displays
            hydraulic folding bearings
            hardened rollers
            conical bending device
            user manual in GERMAN or ENGLISH


        • HESSE+CO Maschinenfabrik GesmbH
        • Straße 4 Objekt 8
        • 2351 Wiener Neudorf
        • Österreich

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Plate Bending Machine -  4 Rolls HESSE by SAHINLER 4R HS 20-150


          • HESSE+CO Maschinenfabrik GesmbH
          • Straße 4 Objekt 8
          • 2351 Wiener Neudorf
          • Österreich

          • +43/2236/638 70-0
            +43/2236/636 62
          • office@hesse-maschinen.com
            https://www.hesse-maschinen.com
          #1069-250 · Plate Bending Machine - 4 Rolls

          HESSE by SAHINLER - 4R HS 20-150 - - -

          Technical details
          neuca. 10 Wochen ab AuftragsTürkei35000 €︱ 710.5 €︱ 2050 mm︱ 6 mm︱ 6 mm︱ 4 mm︱ 4 mm︱ 3 mm︱ 150 mm︱ 150 mm︱ 130 mm︱ 1,5 / 6 m/min︱ 4 kW︱ 4250 mm︱ 960 mm︱ 1100 mm︱ 2800 kg︱
          4 rolls Top rolll driven by hydromotor and planetary gearbox, bottom roll driven by gear and cardan system Pinch roll and latereal rolls move with hydraulic cylinders Digital read-out for lower and side rolls position Hardened rolls Conical bending device Hydraulic load relieving of upper roll Hydraulic drop-end bearing 2 working speeds Protectionagainst overload Moveable control pane According to CE rules OPTIONAL EQUIPMENT: Infinitely adustable speed of rolls Hydraulic side support Hydraulic top support IMPORTANT ISSUES AT CONICAL BENDING: The max. sheet metal thickness isequivalent to 50 % of nominal capacity The cone length can be max. 30 % oremust be more than 60 % of roll length Hardened rolls are recommended
            neu
            ca. 10 Wochen ab Auftrags
            Türkei
            35000 €
            710.5 €
            2050 mm
            6 mm
            6 mm
            4 mm
            4 mm
            3 mm
            150 mm
            150 mm
            130 mm
            1,5 / 6 m/min
            4 kW
            4250 mm
            960 mm
            1100 mm
            2800 kg
            Description :
            4 rolls
            Top rolll driven by hydromotor and planetary gearbox, bottom roll driven by gear and cardan system
            Pinch roll and latereal rolls move with hydraulic cylinders
            Digital read-out for lower and side rolls position
            Hardened rolls
            Conical bending device
            Hydraulic load relieving of upper roll
            Hydraulic drop-end bearing
            2 working speeds
            Protectionagainst overload
            Moveable control pane
            According to CE rules

            OPTIONAL EQUIPMENT:
            Infinitely adustable speed of rolls
            Hydraulic side support
            Hydraulic top support

            IMPORTANT ISSUES AT CONICAL BENDING:
            The max. sheet metal thickness isequivalent to 50 % of nominal capacity
            The cone length can be max. 30 % oremust be more than 60 % of roll length
            Hardened rolls are recommended


        • HESSE+CO Maschinenfabrik GesmbH
        • Straße 4 Objekt 8
        • 2351 Wiener Neudorf
        • Österreich

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Plate Bending Machine -  4 Rolls HESSE by SAHINLER 4R HS 25-220


          • HESSE+CO Maschinenfabrik GesmbH
          • Straße 4 Objekt 8
          • 2351 Wiener Neudorf
          • Österreich

          • +43/2236/638 70-0
            +43/2236/636 62
          • office@hesse-maschinen.com
            https://www.hesse-maschinen.com
          #1069-260 · Plate Bending Machine - 4 Rolls

          HESSE by SAHINLER - 4R HS 25-220 - - -

          Technical details
          neuca. 10 Wochen ab AuftragsTürkei53700 €︱ 1079.37 €︱ 2550 mm︱ 9 mm︱ 9 mm︱ 7 mm︱ 7 mm︱ 5 mm︱ 220 mm︱ 220 mm︱ 160 mm︱ 1,5 / 6 m/min︱ 5.5 kW︱ 4900 mm︱ 1150 mm︱ 1250 mm︱ 4600 kg︱
          4 rolls Top rolll driven by hydromotor and planetary gearbox, bottom roll driven by gear and cardan system Pinch roll and latereal rolls move with hydraulic cylinders Digital read-out for lower and side rolls position Hardened rolls Conical bending device Hydraulic load relieving of upper roll Hydraulic drop-end bearing 2 working speeds Protectionagainst overload Moveable control pane According to CE rules OPTIONAL EQUIPMENT: Infinitely adustable speed of rolls Hydraulic side support Hydraulic top support IMPORTANT ISSUES AT CONICAL BENDING: The max. sheet metal thickness isequivalent to 50 % of nominal capacity The cone length can be max. 30 % oremust be more than 60 % of roll length Hardened rolls are recommended
            neu
            ca. 10 Wochen ab Auftrags
            Türkei
            53700 €
            1079.37 €
            2550 mm
            9 mm
            9 mm
            7 mm
            7 mm
            5 mm
            220 mm
            220 mm
            160 mm
            1,5 / 6 m/min
            5.5 kW
            4900 mm
            1150 mm
            1250 mm
            4600 kg
            Description :
            4 rolls
            Top rolll driven by hydromotor and planetary gearbox, bottom roll driven by gear and cardan system
            Pinch roll and latereal rolls move with hydraulic cylinders
            Digital read-out for lower and side rolls position
            Hardened rolls
            Conical bending device
            Hydraulic load relieving of upper roll
            Hydraulic drop-end bearing
            2 working speeds
            Protectionagainst overload
            Moveable control pane
            According to CE rules

            OPTIONAL EQUIPMENT:
            Infinitely adustable speed of rolls
            Hydraulic side support
            Hydraulic top support

            IMPORTANT ISSUES AT CONICAL BENDING:
            The max. sheet metal thickness isequivalent to 50 % of nominal capacity
            The cone length can be max. 30 % oremust be more than 60 % of roll length
            Hardened rolls are recommended


        • HESSE+CO Maschinenfabrik GesmbH
        • Straße 4 Objekt 8
        • 2351 Wiener Neudorf
        • Österreich

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Plate Bending Machine -  4 Rolls HESSE by SAHINLER 4R HS 30-245


          • HESSE+CO Maschinenfabrik GesmbH
          • Straße 4 Objekt 8
          • 2351 Wiener Neudorf
          • Österreich

          • +43/2236/638 70-0
            +43/2236/636 62
          • office@hesse-maschinen.com
            https://www.hesse-maschinen.com
          #1069-262 · Plate Bending Machine - 4 Rolls

          HESSE by SAHINLER - 4R HS 30-245 - - -

          Technical details
          neuca. 10 Wochen ab AuftragsTürkei62200 €︱ 1250.22 €︱ 3100 mm︱ 9 mm︱ 8 mm︱ 7 mm︱ 7 mm︱ 5 mm︱ 245 mm︱ 245 mm︱ 180 mm︱ 1,5 / 6 m/min︱ 7.5 kW︱ 5350 mm︱ 1600 mm︱ 1470 mm︱ 6850 kg︱
          4 rolls Top rolll driven by hydromotor and planetary gearbox, bottom roll driven by gear and cardan system Pinch roll and latereal rolls move with hydraulic cylinders Digital read-out for lower and side rolls position Hardened rolls Conical bending device Hydraulic load relieving of upper roll Hydraulic drop-end bearing 2 working speeds Protectionagainst overload Moveable control pane According to CE rules OPTIONAL EQUIPMENT: Infinitely adustable speed of rolls Hydraulic side support Hydraulic top support IMPORTANT ISSUES AT CONICAL BENDING: The max. sheet metal thickness isequivalent to 50 % of nominal capacity The cone length can be max. 30 % oremust be more than 60 % of roll length Hardened rolls are recommended
            neu
            ca. 10 Wochen ab Auftrags
            Türkei
            62200 €
            1250.22 €
            3100 mm
            9 mm
            8 mm
            7 mm
            7 mm
            5 mm
            245 mm
            245 mm
            180 mm
            1,5 / 6 m/min
            7.5 kW
            5350 mm
            1600 mm
            1470 mm
            6850 kg
            Description :
            4 rolls
            Top rolll driven by hydromotor and planetary gearbox, bottom roll driven by gear and cardan system
            Pinch roll and latereal rolls move with hydraulic cylinders
            Digital read-out for lower and side rolls position
            Hardened rolls
            Conical bending device
            Hydraulic load relieving of upper roll
            Hydraulic drop-end bearing
            2 working speeds
            Protectionagainst overload
            Moveable control pane
            According to CE rules

            OPTIONAL EQUIPMENT:
            Infinitely adustable speed of rolls
            Hydraulic side support
            Hydraulic top support

            IMPORTANT ISSUES AT CONICAL BENDING:
            The max. sheet metal thickness isequivalent to 50 % of nominal capacity
            The cone length can be max. 30 % oremust be more than 60 % of roll length
            Hardened rolls are recommended


        • HESSE+CO Maschinenfabrik GesmbH
        • Straße 4 Objekt 8
        • 2351 Wiener Neudorf
        • Österreich

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Plate Bending Machine -  4 Rolls HESSE by SAHINLER 4R HS 20-220


          • HESSE+CO Maschinenfabrik GesmbH
          • Straße 4 Objekt 8
          • 2351 Wiener Neudorf
          • Österreich

          • +43/2236/638 70-0
            +43/2236/636 62
          • office@hesse-maschinen.com
            https://www.hesse-maschinen.com
          #1069-268 · Plate Bending Machine - 4 Rolls

          HESSE by SAHINLER - 4R HS 20-220 - - -

          Technical details
          neuca. 10 Wochen ab AuftragsTürkei52100 €︱ 1047.21 €︱ 2050 mm︱ 11 mm︱ 11 mm︱ 9 mm︱ 9 mm︱ 7 mm︱ 220 mm︱ 220 mm︱ 160 mm︱ 1,5 / 6 m/min︱ 5.5 kW︱ 4400 mm︱ 1150 mm︱ 1250 mm︱ 4080 kg︱
          4 rolls Top rolll driven by hydromotor and planetary gearbox, bottom roll driven by gear and cardan system Pinch roll and latereal rolls move with hydraulic cylinders Digital read-out for lower and side rolls position Hardened rolls Conical bending device Hydraulic load relieving of upper roll Hydraulic drop-end bearing 2 working speeds Protectionagainst overload Moveable control pane According to CE rules OPTIONAL EQUIPMENT: Infinitely adustable speed of rolls Hydraulic side support Hydraulic top support IMPORTANT ISSUES AT CONICAL BENDING: The max. sheet metal thickness isequivalent to 50 % of nominal capacity The cone length can be max. 30 % oremust be more than 60 % of roll length Hardened rolls are recommended
            neu
            ca. 10 Wochen ab Auftrags
            Türkei
            52100 €
            1047.21 €
            2050 mm
            11 mm
            11 mm
            9 mm
            9 mm
            7 mm
            220 mm
            220 mm
            160 mm
            1,5 / 6 m/min
            5.5 kW
            4400 mm
            1150 mm
            1250 mm
            4080 kg
            Description :
            4 rolls
            Top rolll driven by hydromotor and planetary gearbox, bottom roll driven by gear and cardan system
            Pinch roll and latereal rolls move with hydraulic cylinders
            Digital read-out for lower and side rolls position
            Hardened rolls
            Conical bending device
            Hydraulic load relieving of upper roll
            Hydraulic drop-end bearing
            2 working speeds
            Protectionagainst overload
            Moveable control pane
            According to CE rules

            OPTIONAL EQUIPMENT:
            Infinitely adustable speed of rolls
            Hydraulic side support
            Hydraulic top support

            IMPORTANT ISSUES AT CONICAL BENDING:
            The max. sheet metal thickness isequivalent to 50 % of nominal capacity
            The cone length can be max. 30 % oremust be more than 60 % of roll length
            Hardened rolls are recommended


        • HESSE+CO Maschinenfabrik GesmbH
        • Straße 4 Objekt 8
        • 2351 Wiener Neudorf
        • Österreich

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Plate Bending Machine -  4 Rolls HESSE by SAHINLER 4R HS 25-245


          • HESSE+CO Maschinenfabrik GesmbH
          • Straße 4 Objekt 8
          • 2351 Wiener Neudorf
          • Österreich

          • +43/2236/638 70-0
            +43/2236/636 62
          • office@hesse-maschinen.com
            https://www.hesse-maschinen.com
          #1069-270 · Plate Bending Machine - 4 Rolls

          HESSE by SAHINLER - 4R HS 25-245 - - -

          Technical details
          neuca. 10 Wochen ab AuftragsTürkei59000 €︱ 1185.9 €︱ 2550 mm︱ 10 mm︱ 10 mm︱ 8 mm︱ 8 mm︱ 6 mm︱ 245 mm︱ 245 mm︱ 180 mm︱ 1,5 / 6 m/min︱ 7.5 kW︱ 4800 mm︱ 1600 mm︱ 1470 mm︱ 6170 kg︱
          4 rolls Top rolll driven by hydromotor and planetary gearbox, bottom roll driven by gear and cardan system Pinch roll and latereal rolls move with hydraulic cylinders Digital read-out for lower and side rolls position Hardened rolls Conical bending device Hydraulic load relieving of upper roll Hydraulic drop-end bearing 2 working speeds Protectionagainst overload Moveable control pane According to CE rules OPTIONAL EQUIPMENT: Infinitely adustable speed of rolls Hydraulic side support Hydraulic top support IMPORTANT ISSUES AT CONICAL BENDING: The max. sheet metal thickness isequivalent to 50 % of nominal capacity The cone length can be max. 30 % oremust be more than 60 % of roll length Hardened rolls are recommended
            neu
            ca. 10 Wochen ab Auftrags
            Türkei
            59000 €
            1185.9 €
            2550 mm
            10 mm
            10 mm
            8 mm
            8 mm
            6 mm
            245 mm
            245 mm
            180 mm
            1,5 / 6 m/min
            7.5 kW
            4800 mm
            1600 mm
            1470 mm
            6170 kg
            Description :
            4 rolls
            Top rolll driven by hydromotor and planetary gearbox, bottom roll driven by gear and cardan system
            Pinch roll and latereal rolls move with hydraulic cylinders
            Digital read-out for lower and side rolls position
            Hardened rolls
            Conical bending device
            Hydraulic load relieving of upper roll
            Hydraulic drop-end bearing
            2 working speeds
            Protectionagainst overload
            Moveable control pane
            According to CE rules

            OPTIONAL EQUIPMENT:
            Infinitely adustable speed of rolls
            Hydraulic side support
            Hydraulic top support

            IMPORTANT ISSUES AT CONICAL BENDING:
            The max. sheet metal thickness isequivalent to 50 % of nominal capacity
            The cone length can be max. 30 % oremust be more than 60 % of roll length
            Hardened rolls are recommended


        • HESSE+CO Maschinenfabrik GesmbH
        • Straße 4 Objekt 8
        • 2351 Wiener Neudorf
        • Österreich

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Plate Bending Machine -  4 Rolls HESSE by SAHINLER 4R HS 30-260


          • HESSE+CO Maschinenfabrik GesmbH
          • Straße 4 Objekt 8
          • 2351 Wiener Neudorf
          • Österreich

          • +43/2236/638 70-0
            +43/2236/636 62
          • office@hesse-maschinen.com
            https://www.hesse-maschinen.com
          #1069-272 · Plate Bending Machine - 4 Rolls

          HESSE by SAHINLER - 4R HS 30-260 - - -

          Technical details
          neuca. 10 Wochen ab AuftragsTürkei67700 €︱ 1360.77 €︱ 3100 mm︱ 10 mm︱ 10 mm︱ 8 mm︱ 8 mm︱ 6 mm︱ 260 mm︱ 260 mm︱ 200 mm︱ 1,5 / 6 m/min︱ 7.5 kW︱ 5350 mm︱ 1600 mm︱ 1550 mm︱ 7685 kg︱
          4 rolls Top rolll driven by hydromotor and planetary gearbox, bottom roll driven by gear and cardan system Pinch roll and latereal rolls move with hydraulic cylinders Digital read-out for lower and side rolls position Hardened rolls Conical bending device Hydraulic load relieving of upper roll Hydraulic drop-end bearing 2 working speeds Protectionagainst overload Moveable control pane According to CE rules OPTIONAL EQUIPMENT: Infinitely adustable speed of rolls Hydraulic side support Hydraulic top support IMPORTANT ISSUES AT CONICAL BENDING: The max. sheet metal thickness isequivalent to 50 % of nominal capacity The cone length can be max. 30 % oremust be more than 60 % of roll length Hardened rolls are recommended
            neu
            ca. 10 Wochen ab Auftrags
            Türkei
            67700 €
            1360.77 €
            3100 mm
            10 mm
            10 mm
            8 mm
            8 mm
            6 mm
            260 mm
            260 mm
            200 mm
            1,5 / 6 m/min
            7.5 kW
            5350 mm
            1600 mm
            1550 mm
            7685 kg
            Description :
            4 rolls
            Top rolll driven by hydromotor and planetary gearbox, bottom roll driven by gear and cardan system
            Pinch roll and latereal rolls move with hydraulic cylinders
            Digital read-out for lower and side rolls position
            Hardened rolls
            Conical bending device
            Hydraulic load relieving of upper roll
            Hydraulic drop-end bearing
            2 working speeds
            Protectionagainst overload
            Moveable control pane
            According to CE rules

            OPTIONAL EQUIPMENT:
            Infinitely adustable speed of rolls
            Hydraulic side support
            Hydraulic top support

            IMPORTANT ISSUES AT CONICAL BENDING:
            The max. sheet metal thickness isequivalent to 50 % of nominal capacity
            The cone length can be max. 30 % oremust be more than 60 % of roll length
            Hardened rolls are recommended


        • HESSE+CO Maschinenfabrik GesmbH
        • Straße 4 Objekt 8
        • 2351 Wiener Neudorf
        • Österreich

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Plate Bending Machine -  4 Rolls HESSE by SAHINLER 4R HS 20-245


          • HESSE+CO Maschinenfabrik GesmbH
          • Straße 4 Objekt 8
          • 2351 Wiener Neudorf
          • Österreich

          • +43/2236/638 70-0
            +43/2236/636 62
          • office@hesse-maschinen.com
            https://www.hesse-maschinen.com
          #1069-274 · Plate Bending Machine - 4 Rolls

          HESSE by SAHINLER - 4R HS 20-245 - - -

          Technical details
          neuca. 10 Wochen ab AuftragsTürkei56100 €︱ 1127.61 €︱ 2050 mm︱ 13 mm︱ 13 mm︱ 10 mm︱ 10 mm︱ 8 mm︱ 245 mm︱ 245 mm︱ 180 mm︱ 1,5 / 6 m/min︱ 7.5 kW︱ 4300 mm︱ 1600 mm︱ 1470 mm︱ 5450 kg︱
          4 rolls Top rolll driven by hydromotor and planetary gearbox, bottom roll driven by gear and cardan system Pinch roll and latereal rolls move with hydraulic cylinders Digital read-out for lower and side rolls position Hardened rolls Conical bending device Hydraulic load relieving of upper roll Hydraulic drop-end bearing 2 working speeds Protectionagainst overload Moveable control pane According to CE rules OPTIONAL EQUIPMENT: Infinitely adustable speed of rolls Hydraulic side support Hydraulic top support IMPORTANT ISSUES AT CONICAL BENDING: The max. sheet metal thickness isequivalent to 50 % of nominal capacity The cone length can be max. 30 % oremust be more than 60 % of roll length Hardened rolls are recommended
            neu
            ca. 10 Wochen ab Auftrags
            Türkei
            56100 €
            1127.61 €
            2050 mm
            13 mm
            13 mm
            10 mm
            10 mm
            8 mm
            245 mm
            245 mm
            180 mm
            1,5 / 6 m/min
            7.5 kW
            4300 mm
            1600 mm
            1470 mm
            5450 kg
            Description :
            4 rolls
            Top rolll driven by hydromotor and planetary gearbox, bottom roll driven by gear and cardan system
            Pinch roll and latereal rolls move with hydraulic cylinders
            Digital read-out for lower and side rolls position
            Hardened rolls
            Conical bending device
            Hydraulic load relieving of upper roll
            Hydraulic drop-end bearing
            2 working speeds
            Protectionagainst overload
            Moveable control pane
            According to CE rules

            OPTIONAL EQUIPMENT:
            Infinitely adustable speed of rolls
            Hydraulic side support
            Hydraulic top support

            IMPORTANT ISSUES AT CONICAL BENDING:
            The max. sheet metal thickness isequivalent to 50 % of nominal capacity
            The cone length can be max. 30 % oremust be more than 60 % of roll length
            Hardened rolls are recommended


        • HESSE+CO Maschinenfabrik GesmbH
        • Straße 4 Objekt 8
        • 2351 Wiener Neudorf
        • Österreich

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Plate Bending Machine -  4 Rolls HESSE by SAHINLER 4R HS 20-200


          • HESSE+CO Maschinenfabrik GesmbH
          • Straße 4 Objekt 8
          • 2351 Wiener Neudorf
          • Österreich

          • +43/2236/638 70-0
            +43/2236/636 62
          • office@hesse-maschinen.com
            https://www.hesse-maschinen.com
          #1069-2215 · Plate Bending Machine - 4 Rolls

          HESSE by SAHINLER - 4R HS 20-200 - - -

          Technical details
          neuca. 10 Wochen ab AuftragsTürkei45900 €︱ 931.77 €︱ 2050 mm︱ 10 mm︱ 10 mm︱ 8 mm︱ 8 mm︱ 6 mm︱ 200 - 220 mm︱ 200 - 220 mm︱ 160 mm︱ 1,5 / 6 m/min︱ 5.5 kW︱ 4400 mm︱ 1150 mm︱ 1250 mm︱ 3950 kg︱
          4 rolls Top rolll driven by hydromotor and planetary gearbox, bottom roll driven by gear and cardan system Pinch roll and latereal rolls move with hydraulic cylinders Digital read-out for lower and side rolls position Hardened rolls Conical bending device Hydraulic load relieving of upper roll Hydraulic drop-end bearing 2 working speeds Protectionagainst overload Moveable control pane According to CE rules OPTIONAL EQUIPMENT: Infinitely adustable speed of rolls Hydraulic side support Hydraulic top support IMPORTANT ISSUES AT CONICAL BENDING: The max. sheet metal thickness isequivalent to 50 % of nominal capacity The cone length can be max. 30 % oremust be more than 60 % of roll length Hardened rolls are recommended
            neu
            ca. 10 Wochen ab Auftrags
            Türkei
            45900 €
            931.77 €
            2050 mm
            10 mm
            10 mm
            8 mm
            8 mm
            6 mm
            200 - 220 mm
            200 - 220 mm
            160 mm
            1,5 / 6 m/min
            5.5 kW
            4400 mm
            1150 mm
            1250 mm
            3950 kg
            Description :
            4 rolls
            Top rolll driven by hydromotor and planetary gearbox, bottom roll driven by gear and cardan system
            Pinch roll and latereal rolls move with hydraulic cylinders
            Digital read-out for lower and side rolls position
            Hardened rolls
            Conical bending device
            Hydraulic load relieving of upper roll
            Hydraulic drop-end bearing
            2 working speeds
            Protectionagainst overload
            Moveable control pane
            According to CE rules

            OPTIONAL EQUIPMENT:
            Infinitely adustable speed of rolls
            Hydraulic side support
            Hydraulic top support

            IMPORTANT ISSUES AT CONICAL BENDING:
            The max. sheet metal thickness isequivalent to 50 % of nominal capacity
            The cone length can be max. 30 % oremust be more than 60 % of roll length
            Hardened rolls are recommended


        • HESSE+CO Maschinenfabrik GesmbH
        • Straße 4 Objekt 8
        • 2351 Wiener Neudorf
        • Österreich

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Plate Bending Machine -  4 Rolls HESSE by DURMA HRB-4 20240


          • HESSE+CO Maschinenfabrik GesmbH
          • Straße 4 Objekt 8
          • 2351 Wiener Neudorf
          • Österreich

          • +43/2236/638 70-0
            +43/2236/636 62
          • office@hesse-maschinen.com
            https://www.hesse-maschinen.com
          #1069-1135 · Plate Bending Machine - 4 Rolls

          HESSE by DURMA - HRB-4 20240 - - -

          Technical details
          neuca. 12 - 14 Wochen ab AufTürkei53800 €︱ 1081.38 €︱ 2050 mm︱ 13 mm︱ 10 mm︱ 13 mm︱ 10 mm︱ 10 mm︱ 8 mm︱ 240 mm︱ 240 mm︱ 190 mm︱ 820 mm︱ 11 kW︱ 3830 mm︱ 1160 mm︱ 1200 mm︱
          4 rolls fully hydraulic drive of upper and lower roll (from 30 mm bending capacity all four rolls) by planetary gear box hydr. side rolls positioning with electronical synchronisation hydr. lower roll feed with mechanical synchronisation adjustable pinching pressure variable rolling speed hardened rolls conical bending device hydraulic drop-end bearing moveable control panel overload protection user manual in GERMAN or ENGLISH according to CE rules OPTIONAL: NC control upper and lateral supports IMPORTANT ISSUES AT CONICAL BENDING: the max. sheet metal thickness isequivalent to 50 % of nominal capacity
            neu
            ca. 12 - 14 Wochen ab Auf
            Türkei
            53800 €
            1081.38 €
            2050 mm
            13 mm
            10 mm
            13 mm
            10 mm
            10 mm
            8 mm
            240 mm
            240 mm
            190 mm
            820 mm
            11 kW
            3830 mm
            1160 mm
            1200 mm
            Description :
            4 rolls
            fully hydraulic drive of upper and lower roll (from 30 mm bending capacity all four rolls) by planetary gear box
            hydr. side rolls positioning with electronical synchronisation
            hydr. lower roll feed with mechanical synchronisation
            adjustable pinching pressure
            variable rolling speed
            hardened rolls
            conical bending device
            hydraulic drop-end bearing
            moveable control panel
            overload protection
            user manual in GERMAN or ENGLISH
            according to CE rules

            OPTIONAL:
            NC control
            upper and lateral supports

            IMPORTANT ISSUES AT CONICAL BENDING:
            the max. sheet metal thickness isequivalent to 50 % of nominal capacity


        • HESSE+CO Maschinenfabrik GesmbH
        • Straße 4 Objekt 8
        • 2351 Wiener Neudorf
        • Österreich

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Plate Bending Machine -  4 Rolls HESSE by SAHINLER 4R HS 20-180


          • HESSE+CO Maschinenfabrik GesmbH
          • Straße 4 Objekt 8
          • 2351 Wiener Neudorf
          • Österreich

          • +43/2236/638 70-0
            +43/2236/636 62
          • office@hesse-maschinen.com
            https://www.hesse-maschinen.com
          #1069-2213 · Plate Bending Machine - 4 Rolls

          HESSE by SAHINLER - 4R HS 20-180 - - -

          Technical details
          neuca. 10 Wochen ab AuftragsTürkei40500 €︱ 822.15 €︱ 2050 mm︱ 8 mm︱ 8 mm︱ 6 mm︱ 6 mm︱ 4 mm︱ 180 mm︱ 180 mm︱ 150 mm︱ 1,5 / 6 m/min︱ 5.5 kW︱ 4400 mm︱ 1150 mm︱ 1250 mm︱ 3790 kg︱
          4 rolls Top rolll driven by hydromotor and planetary gearbox, bottom roll driven by gear and cardan system Pinch roll and latereal rolls move with hydraulic cylinders Digital read-out for lower and side rolls position Hardened rolls Conical bending device Hydraulic load relieving of upper roll Hydraulic drop-end bearing 2 working speeds Protectionagainst overload Moveable control pane According to CE rules OPTIONAL EQUIPMENT: Infinitely adustable speed of rolls Hydraulic side support Hydraulic top support IMPORTANT ISSUES AT CONICAL BENDING: The max. sheet metal thickness isequivalent to 50 % of nominal capacity The cone length can be max. 30 % oremust be more than 60 % of roll length Hardened rolls are recommended
            neu
            ca. 10 Wochen ab Auftrags
            Türkei
            40500 €
            822.15 €
            2050 mm
            8 mm
            8 mm
            6 mm
            6 mm
            4 mm
            180 mm
            180 mm
            150 mm
            1,5 / 6 m/min
            5.5 kW
            4400 mm
            1150 mm
            1250 mm
            3790 kg
            Description :
            4 rolls
            Top rolll driven by hydromotor and planetary gearbox, bottom roll driven by gear and cardan system
            Pinch roll and latereal rolls move with hydraulic cylinders
            Digital read-out for lower and side rolls position
            Hardened rolls
            Conical bending device
            Hydraulic load relieving of upper roll
            Hydraulic drop-end bearing
            2 working speeds
            Protectionagainst overload
            Moveable control pane
            According to CE rules

            OPTIONAL EQUIPMENT:
            Infinitely adustable speed of rolls
            Hydraulic side support
            Hydraulic top support

            IMPORTANT ISSUES AT CONICAL BENDING:
            The max. sheet metal thickness isequivalent to 50 % of nominal capacity
            The cone length can be max. 30 % oremust be more than 60 % of roll length
            Hardened rolls are recommended


        • HESSE+CO Maschinenfabrik GesmbH
        • Straße 4 Objekt 8
        • 2351 Wiener Neudorf
        • Österreich

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Plate Bending Machine -  4 Rolls HESSE by SAHINLER 4R HS 25-260


          • HESSE+CO Maschinenfabrik GesmbH
          • Straße 4 Objekt 8
          • 2351 Wiener Neudorf
          • Österreich

          • +43/2236/638 70-0
            +43/2236/636 62
          • office@hesse-maschinen.com
            https://www.hesse-maschinen.com
          #1069-1483 · Plate Bending Machine - 4 Rolls

          HESSE by SAHINLER - 4R HS 25-260 - - -

          Technical details
          neuca. 10 Wochen ab AuftragsTürkei64100 €︱ 1288.41 €︱ 2550 mm︱ 13 mm︱ 13 mm︱ 10 mm︱ 10 mm︱ 8 mm︱ 260 mm︱ 260 mm︱ 200 mm︱ 1,5 / 6 m/min︱ 7.5 kW︱ 4800 mm︱ 1600 mm︱ 1550 mm︱ 6800 kg︱
          4 rolls Top rolll driven by hydromotor and planetary gearbox, bottom roll driven by gear and cardan system Pinch roll and latereal rolls move with hydraulic cylinders Digital read-out for lower and side rolls position Hardened rolls Conical bending device Hydraulic load relieving of upper roll Hydraulic drop-end bearing 2 working speeds Protectionagainst overload Moveable control pane According to CE rules OPTIONAL EQUIPMENT: Infinitely adustable speed of rolls Hydraulic side support Hydraulic top support IMPORTANT ISSUES AT CONICAL BENDING: The max. sheet metal thickness isequivalent to 50 % of nominal capacity The cone length can be max. 30 % oremust be more than 60 % of roll length Hardened rolls are recommended
            neu
            ca. 10 Wochen ab Auftrags
            Türkei
            64100 €
            1288.41 €
            2550 mm
            13 mm
            13 mm
            10 mm
            10 mm
            8 mm
            260 mm
            260 mm
            200 mm
            1,5 / 6 m/min
            7.5 kW
            4800 mm
            1600 mm
            1550 mm
            6800 kg
            Description :
            4 rolls
            Top rolll driven by hydromotor and planetary gearbox, bottom roll driven by gear and cardan system
            Pinch roll and latereal rolls move with hydraulic cylinders
            Digital read-out for lower and side rolls position
            Hardened rolls
            Conical bending device
            Hydraulic load relieving of upper roll
            Hydraulic drop-end bearing
            2 working speeds
            Protectionagainst overload
            Moveable control pane
            According to CE rules

            OPTIONAL EQUIPMENT:
            Infinitely adustable speed of rolls
            Hydraulic side support
            Hydraulic top support

            IMPORTANT ISSUES AT CONICAL BENDING:
            The max. sheet metal thickness isequivalent to 50 % of nominal capacity
            The cone length can be max. 30 % oremust be more than 60 % of roll length
            Hardened rolls are recommended


        • HESSE+CO Maschinenfabrik GesmbH
        • Straße 4 Objekt 8
        • 2351 Wiener Neudorf
        • Österreich

        • Datasheet
          Request / Contact
          •   
          •   
          • 1  
          • 2  
          • 3  
          • 4  
          • 5  
          •   
          •