Shear - Manual
Machinelist: Shear - Manual
Plate Shear - Mechanical
- Plum & Partner Werkzeugmaschinen GmbH
- Winkelstraße 32
- 32257 Bünde
- Deutschland
-
+49 05223 574444
+49 5223188330 -
info@plum-maschinen.de
www.plum-maschinen.de
#1082-08037 · Plate Shear - Mechanical
KAPEMA - SMP 20-20 - - Fabrikneu / new -
Technical details
The new motor guillotine type SMP is a well dimensioned machine with all-welded link guides. The drive takes place with a Standard geared brake motor via a chain connection to the main axle. the Knives are of the highest quality. The optimal cutting angle secures the Together with the rubber-covered blank holder perfect cuts. Bearings and guides are maintenance and lubrication-free. Standard equipment: • Back gauge 665 with mm scale. • cutting edge lighting. • Section counter. • Table extensions 600 mm. • Right angle stop, left. • Movable 24 V foot switch with emergency stop. • Motor protection switch and emergency stop. • 2 cutting edges per knife. • Rear protective grille, warranty = 12 months for single-shift operation. Other models: 1275 x 3mm, 1250 x 4mm, 2050 x 2mm Machine dealer with own stock of 1600 m².
Datasheet
Request / Contact
- Plum & Partner Werkzeugmaschinen GmbH
- Winkelstraße 32
- 32257 Bünde
- Deutschland
-
+49 05223 574444
+49 5223188330 -
info@plum-maschinen.de
www.plum-maschinen.de
#1082-08408 · Plate Shear - Mechanical
KAPEMA - SMP 12-30 - - Fabrikneu / new -
Technical details
The guillotine shears type SMP is a well-dimensioned machine with all-welded gate guides. The drive takes place with a standard geared brake motor via a chain connection to the main axis. The knives are of the highest quality. The optimal cutting angle ensures together with the rubber-coated sheet metal holder, perfect cuts. Bearings and guides are maintenance-free and lubrication-free. Standard equipment: • Back gauge 635 with mm scale. • Cutting line lighting. • Section counter. • Table extensions 600 mm. • Right-angled stop, left. • Movable 24 V foot switch with emergency stop. • Motor protection switch and emergency stop. • 2 cutting edges per knife. • rear photocell. Pre-freight to our stock + packaging 270, -. Machine dealer with own stock of 1600 m².
Datasheet
Request / Contact
- Plum & Partner Werkzeugmaschinen GmbH
- Winkelstraße 32
- 32257 Bünde
- Deutschland
-
+49 05223 574444
+49 5223188330 -
info@plum-maschinen.de
www.plum-maschinen.de
#1082-08417 · Plate Shear - Mechanical
KAPEMA - SMP 20-30 - - Fabrikneu / new -
Technical details
The new motor guillotine type SMP is a well dimensioned machine with all-welded link guides. The drive takes place with a Standard geared brake motor via a chain connection to the main axle. the Knives are of the highest quality. The optimal cutting angle secures the Together with the rubber-covered blank holder perfect cuts. Bearings and guides are maintenance and lubrication-free. Standard equipment: • Back gauge 665 with mm scale. • cutting edge lighting. • Section counter. • Table extensions 600 mm. • Right angle stop, left. • Movable 24 V foot switch with emergency stop. • Motor protection switch and emergency stop. • 2 cutting edges per knife. • Rear protective grille, warranty = 12 months for single-shift operation. Other models: 1275 x 3mm, 1250 x 4mm, 2050 x 2mm Machine dealer with own stock of 1600 m².
Datasheet
Request / Contact
- Markus Hirsch GmbH
- Hüttenstrasse 1
- 46284 Dorsten
- Deutschland
-
+49 2362 95035 12
+49 2362 95035 10 -
liersch@hirsch-maschinen.de
www.hirsch-maschinen.de
#1077-01210 · Plate Shear - Mechanical
RFR - MS/24 - - ca. 1960 -
Technical details
- EMUK GmbH Werkzeugmaschinen
- Siemensstrasse 24 a
- 76316 Malsch
- Deutschland
-
+49 (0) 7246 1392
+49 (0) 7246 1394 -
info@emuk.de
www.emuk.de
#1058-22062 · Plate Shear - Mechanical
RAS - 53.60 - - 380/6 -
Technical details
Datasheet
Request / Contact
- WMT GmbH & Co.KG
- Siemensstraße 1
- 46342 Velen-Ramsdorf
- Deutschland
-
+49 2863 92477-47
+49 2863 92477-50 -
info@w-m-t.de
www.w-m-t.de
#1108-75103 · Plate Shear - Mechanical
OSTAS - RGM 1550 x 3 - - 2022 -
Technical details
Demonstration machine with small paint damage. The machine works quietly and is powered by its geared motor Braking system energy-saving. Our machine is welded as a monobloc body from ST42 quality material. The knives of the machine are of 2379 quality and the brand name is BOHLER. These high-quality knives guarantee precise cutting. Emergency stop button, foot switch and finger guard are included standard equipment. (Documentation in English only)
- HESSE+CO Maschinenfabrik GesmbH
- Straße 4 Objekt 8
- 2351 Wiener Neudorf
- Österreich
-
+43/2236/638 70-0
+43/2236/636 62 -
office@hesse-maschinen.com
https://www.hesse-maschinen.com
#1069-439 · Plate Shear - Mechanical
HESSE by DURMA - KGM 1015 - - 2022 -
Technical details
DEMO MACHINE, MINT CONDITION welded steel construction with manual hold down unit back gauge adjustable by handwheel users manual in ENGLISH
Datasheet
Request / Contact
- HESSE+CO Maschinenfabrik GesmbH
- Straße 4 Objekt 8
- 2351 Wiener Neudorf
- Österreich
-
+43/2236/638 70-0
+43/2236/636 62 -
office@hesse-maschinen.com
https://www.hesse-maschinen.com
#1069-441 · Plate Shear - Mechanical
HESSE by DURMA - KGM 1215 - - 2022 -
Technical details
DEMO MACHINE - MINT CONDITION welded steel construction with manual hold down unit back gauge adjustable by handwheel users manual in ENGLISH
Datasheet
Request / Contact
- SKM Industriemaschinen
- Röntgenstr. 3
- 89264 Weißenhorn
- Deutschland
-
+49 (0) 7309 954 986 0
+49 (0) 7309 954 986 1 -
info@skm-maschinen.de
www.skm-maschinen.de
#2032-1144 · Plate Shear - Mechanical
OSTAS - RGM 1550 x 3 - - 2019 -
Technical details
Producer: OSTAS Type: RGM 1050 x 3 YOM: new Max. Shearing Length: 1.050 mm Shearing Capacity: 3 mm Shearing Angle: 2°30' Strokes Per Minute: 35 d/d Motor Power: 3 kW Table Width: 510 mm Table Height: 820 mm Rear Gauge Distance: 500 mm Dimensions of the machine (LxWxH): 1.640 x 2.060 x 1.210 mm Weight: ca. 1.100 kg Additional information: • Manual backgauge with 500 mm stroke • Squaring arm with T-slot, stopper and ruler • Foot pedal • Front sheet holding arms • Cutting line lighting • Protection Cages optional: • Cutting unit counter • Motorised backgauge with 500 mm stroke • Backgauge with NC control • Pneumatic Sheet Support System • Optical security bar • 0-180° angle cutting
- Heinz Sanders GmbH
- Fresenburger Weg 4
- 49779 Niederlangen
- Deutschland
-
+49 (0) 5939 9406 40
+49 (0) 5939 9406 50 -
maschinen@heinz-sanders.de
www.heinz-sanders.de
#1125-3320042 · Plate Shear - Mechanical
METALLKRAFT - FTBS 1050-10 - - 2017 -
Technical details
- Frech GmbH
- Werderstr. 82
- 74889 Sinsheim
- Deutschland
-
0049-7261-1011
0049-7261-63966 -
info@frech-maschinen.de
www.frech-maschinen.de
#1073-94086 · Plate Shear - Mechanical
DURMA - MS 2504 - - 2012 -
Technical details
** Current new price with special accessories ~ 33.000 euros ** from a maintenance workshop / good condition (!!) Furnishing: - robust / powerful mechanical guillotine shears - electric backgauge, with ball screws - with DURMA NC control - model D-Touch 7 * Control unit with touchscreen function * 128 MB internal memory (programming possible) * Multilingual (English, Turkish, German) * INCH/metric conversion - manual cutting gap adjustment, from the front * analogue display of the material thickness - 1x extra long side stop 2.000 mm, with support foot & T-slot - 2x support arms - Ball casters in the support table - free-moving footswitch - rear protective device (light barrier) - original operating instructions (machine + control) Special accessories included : - Pneumatic sheet metal holding device, for thin sheet metal blanks - 1x extra long side stop, with support foot - 1x box with spare knife
- A + B Werkzeuge Maschinen Handels GmbH
- Rottweg 17
- 48683 Ahaus
- Deutschland
-
(0049)-2561-9384-71
(0049)-2561-9384-36 -
info@ab-maschinen.de
www.ab-maschinen.de
#1008-9325259 · Plate Shear - Mechanical
DURMA - MS 2504 - - 2012 -
Technical details
** Current new price with special accessories ~ 33.000 euros ** from a maintenance workshop / good condition (!!) Furnishing: - robust / powerful mechanical guillotine shears - electric backgauge, with ball screws - with DURMA NC control - model D-Touch 7 * Control unit with touchscreen function * 128 MB internal memory (programming possible) * Multilingual (English, Turkish, German) * INCH/metric conversion - manual cutting gap adjustment, from the front * analogue display of the material thickness - 1x extra long side stop 2.000 mm, with support foot & T-slot - 2x support arms - Ball casters in the support table - free-moving footswitch - rear protective device (light barrier) - original operating instructions (machine + control) Special accessories included : - Pneumatic sheet metal holding device, for thin sheet metal blanks - 1x extra long side stop, with support foot - 1x box with spare knife
Datasheet
Request / Contact
- A + B Werkzeuge Maschinen Handels GmbH
- Rottweg 17
- 48683 Ahaus
- Deutschland
-
(0049)-2561-9384-71
(0049)-2561-9384-36 -
info@ab-maschinen.de
www.ab-maschinen.de
#1008-9325336 · Plate Shear - Mechanical
HM - NWKS 2000/3 - - 2010 - DIGI
Technical details
** Machine from a maintenance workshop ** maintained condition (!!) Furnishing: - robust electro-mechanical sheet metal shears - Machine body in a closed design as an all-steel welded construction - heavy / robust drive motor (5.5 KW) - electro-motorized backgauge, including digital control unit * Adjustment range max. 1.000 mm * Input of target / actual value possible - manual cutting gap adjustment, adjustable from the front - 1x table side stop - Ball rollers in the support table - 1x freely movable foot switch, including EMERGENCY stop button - front finger protection - original instruction manual * Machine link: http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9325336
Datasheet
Request / Contact
- Frech GmbH
- Werderstr. 82
- 74889 Sinsheim
- Deutschland
-
0049-7261-1011
0049-7261-63966 -
info@frech-maschinen.de
www.frech-maschinen.de
#1073-94181 · Plate Shear - Mechanical
HM - NWKS 2000/3 - - 2010 - DIGI
Technical details
** Machine from a maintenance workshop ** maintained condition (!!) Furnishing: - robust electro-mechanical sheet metal shears - Machine body in a closed design as an all-steel welded construction - heavy / robust drive motor (5.5 KW) - electro-motorized backgauge, including digital control unit * Adjustment range max. 1.000 mm * Input of target / actual value possible - manual cutting gap adjustment, adjustable from the front - 1x table side stop - Ball rollers in the support table - 1x freely movable foot switch, including EMERGENCY stop button - front finger protection - original instruction manual
- Frech GmbH
- Werderstr. 82
- 74889 Sinsheim
- Deutschland
-
0049-7261-1011
0049-7261-63966 -
info@frech-maschinen.de
www.frech-maschinen.de
#1073-94167 · Plate Shear - Mechanical
SCHRÖDER - MHSU 1500/2,0 - - 2009 -
Technical details
- manual back gauge 500mm - Hold-down device with hard rubber strip - Sheet metal holding device mechanically controlled to the rear including sheet metal slide - Rear area protection via light barrier
- Frech GmbH
- Werderstr. 82
- 74889 Sinsheim
- Deutschland
-
0049-7261-1011
0049-7261-63966 -
info@frech-maschinen.de
www.frech-maschinen.de
#1073-94125 · Plate Shear - Mechanical
SCHROEDER - MHSUV 2000/4,0 - - 2008 - POS 100
Technical details
** Machine from a maintenance workshop ** very well maintained condition - hardly used (!!) Furnishing: - robust / motorized swing-cut guillotine shears - Shatterproof, torsion-free steel welded construction - compact and clear mechanical design - Electric back gauge, with SCHRÖDER POS 100 NC control * Digital position display from the backgauge * adjustable from the front right * with target/actual value input * Continuous adjustment over the entire travel range * Protection of limit values with limit switches * 9-fold programming possible - "Duo-Cut" drive with two dynamic, powerful geared motors - Support table with recessed grips - Hold-down bar with hard rubber strip - All-steel knife, double-edged - 1x side stop, with T-slot and mm scale - 2x extended sheet metal support arms, with T-slot and mm scale - Selector switch for single and continuous stroke - freely movable foot switch - Rear safety device - original operating instructions + CD Rom **Special accessories included: - pneumatically controlled sheet metal holding device for thin sheet metal cuts * Sheet metal removal / sheet metal slide to the front (operator side) - 1x wooden box with replacement scissor blades
- A + B Werkzeuge Maschinen Handels GmbH
- Rottweg 17
- 48683 Ahaus
- Deutschland
-
(0049)-2561-9384-71
(0049)-2561-9384-36 -
info@ab-maschinen.de
www.ab-maschinen.de
#1008-9325303 · Plate Shear - Mechanical
SCHROEDER - MHSUV 2000/4,0 - - 2008 - POS 100
Technical details
** Machine from a maintenance workshop ** very well maintained condition - hardly used (!!) Furnishing: - robust / motorized swing-cut guillotine shears - Shatterproof, torsion-free steel welded construction - compact and clear mechanical design - Electric back gauge, with SCHRÖDER POS 100 NC control * Digital position display from the backgauge * adjustable from the front right * with target/actual value input * Continuous adjustment over the entire travel range * Protection of limit values with limit switches * 9-fold programming possible - "Duo-Cut" drive with two dynamic, powerful geared motors - Support table with recessed grips - Hold-down bar with hard rubber strip - All-steel knife, double-edged - 1x side stop, with T-slot and mm scale - 2x extended sheet metal support arms, with T-slot and mm scale - Selector switch for single and continuous stroke - freely movable foot switch - Rear safety device - original operating instructions + CD Rom **Special accessories included: - pneumatically controlled sheet metal holding device for thin sheet metal cuts * Sheet metal removal / sheet metal slide to the front (operator side) - 1x wooden box with replacement scissor blades * Machine link: http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9325303 * Machinevideo : https://www.youtube.com/watch?v=5w-LdgCg6J8
Datasheet
Request / Contact
- WeMa Antonius Pigge GmbH
- Barnstorfer Str. 3
- 49424 Goldenstedt
- Deutschland
-
+49 (0)444496700
+49 (0)4444967010 -
info@wema-pigge.de
www.wema-pigge.de
#2031-3794 · Plate Shear - Mechanical
SCHRÖDER FASTI - MSS DUO-CUT - - 1999 -
Technical details
3 support arms 1 angle stop pneumatic hold-down device Backgauge to be operated by hand
Datasheet
Request / Contact
- Frech GmbH
- Werderstr. 82
- 74889 Sinsheim
- Deutschland
-
0049-7261-1011
0049-7261-63966 -
info@frech-maschinen.de
www.frech-maschinen.de
#1073-94042 · Plate Shear - Mechanical
FORMAT - TS2-1000-50 - - 1997 -
Technical details
** from a maintenance workshop (!!) Furnishing: - Motorized / electric guillotine shears - manual backgauge, adjustment by hand crank * Travel range max. 700 mm * with analogue position display (scale) * manual adjustment from behind - rear protection - rear sheet metal slide - free-moving footswitch
- A + B Werkzeuge Maschinen Handels GmbH
- Rottweg 17
- 48683 Ahaus
- Deutschland
-
(0049)-2561-9384-71
(0049)-2561-9384-36 -
info@ab-maschinen.de
www.ab-maschinen.de
#1008-9325255 · Plate Shear - Mechanical
FORMAT - TS2-1000-50 - - 1997 -
Technical details
** from a maintenance workshop (!!) Furnishing: - Motorized / electric guillotine shears - manual backgauge, adjustment by hand crank * Travel range max. 700 mm * with analogue position display (scale) * manual adjustment from behind - rear protection - rear sheet metal slide - free-moving footswitch
Datasheet
Request / Contact
- Karl Günter Wirths GmbH
- Scharpenberger Strasse 96-98
- 58256 Ennepetal
- Deutschland
-
02333-79050
02333-790555 -
sales@wirths.net
www.wirths.net
#1041-18192 · Plate Shear - Mechanical
FASTI - 527 - - 1997 -
Technical details
It has an electronic back gauge with digital readout. It has 1 side guiding arm, 2 support arm, foot switch etc. It has a sheet holding device at the back side.
Datasheet
Request / Contact
- RS Sperling
- von-Braun-Str. 20
- 46244 Bottrop
- Deutschland
-
+49 (0) 2045 / 41 43 22-0
+49 (0) 2045 / 41 43 22-9 -
info@rs-sperling.de
www.rs-sperling.de
#1100-092052 · Plate Shear - Mechanical
DURMAZLAR - RGM 2550 x 2,5 - - 1996 -
Technical details
- B&R Service GmbH
- Esslingerstr.8
- 73776 Altbach
- Deutschland
-
+49 (0)7153 99 46 565
+49 (0)7153 99 46 568 -
info@b-r-service.de
www.b-r-service.de
#2025-0223351 · Plate Shear - Mechanical
CIDAN - MS-X2050/4,0 - - 1995 - Elgo P71
Technical details
- Frech GmbH
- Werderstr. 82
- 74889 Sinsheim
- Deutschland
-
0049-7261-1011
0049-7261-63966 -
info@frech-maschinen.de
www.frech-maschinen.de
#1073-94168 · Plate Shear - Mechanical
FASTI - 506-10-2,5 - - 1991 -
Technical details
Manually adjustable back gauge up to 530 mm Cutting angle adjustment Side stop and table extension Knife sharpened