European network of stockholding machinery dealers

Bitte einen Suchbegriff eingeben - Please enter a search term
Category:
    Manufacturer:
      Machines:
        Trader:

          Plate Bending Machine - 3 Rolls

          Machinelist: Plate Bending Machine - 3 Rolls


          Rolls bending machine - 3 Rolls

          used Sheet metal working / shaeres / bending Rolls bending machine - 3 Rolls ROLLMAK SME 140-20/4.5


          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland

          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-4040360 · Rolls bending machine - 3 Rolls

          ROLLMAK - SME 140-20/4.5 - - NEU -

          Technical details
          sheet width 2050 mm︱plate thickness 4.5 mm︱pre-bending 4.0 ︱volt 400 V︱frequency range 50 Hz︱min. dia. 210 mm︱0 140 mm︱total power requirement 2.2 kW︱weight of the machine ca. 1565 kg︱dimensions of the machine ca. 3240x1200x900 mm︱
            sheet width 2050 mm
            plate thickness 4.5 mm
            pre-bending 4.0
            volt 400 V
            frequency range 50 Hz
            min. dia. 210 mm
            0 140 mm
            total power requirement 2.2 kW
            weight of the machine ca. 1565 kg
            dimensions of the machine ca. 3240x1200x900 mm


        • Bästlein
        • Augsburger Str. 56
        • 89312 Günzburg
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Rolls bending machine - 3 Rolls AK-BEND AS 90-10/3,0


          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland

          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-4040077 · Rolls bending machine - 3 Rolls

          AK-BEND - AS 90-10/3,0 - - Neu -

          Technical details
          sheet width 1050 mm︱plate thickness 3,3 mm︱pre-bending 3,0 mm︱roll diameter 90 mm︱min. dia. 130 mm︱total power requirement 1,1 kw︱weight of the machine ca. 570 kg︱dimensions of the machine ca. 2100 x 800 x 1130 mm︱
          Domestic equipments: - Asymmetrical 3-roll round bending machine with motor drive - Upper roller swung out - Conical bending device - Main engine with brake device Additional equipment: - motorized rear roller adjustment - Digital display for back roller - induction hardened rolls
            sheet width 1050 mm
            plate thickness 3,3 mm
            pre-bending 3,0 mm
            roll diameter 90 mm
            min. dia. 130 mm
            total power requirement 1,1 kw
            weight of the machine ca. 570 kg
            dimensions of the machine ca. 2100 x 800 x 1130 mm
            Description :
            Domestic equipments:
            - Asymmetrical 3-roll round bending machine with motor drive
            - Upper roller swung out
            - Conical bending device
            - Main engine with brake device

            Additional equipment:
            - motorized rear roller adjustment
            - Digital display for back roller
            - induction hardened rolls


        • Bästlein
        • Augsburger Str. 56
        • 89312 Günzburg
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Rolls bending machine - 3 Rolls AK-BEND ASM 140-12/5,0


          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland

          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-4040081 · Rolls bending machine - 3 Rolls

          AK-BEND - ASM 140-12/5,0 - - Neu -

          Technical details
          sheet width 1250 mm︱plate thickness 5,5 mm︱pre-bending 5,0 mm︱roll length 1280 mm︱min. dia. 210 mm︱roll diam. toproll 140 mm︱weight 1365 kg︱range L-W-H 2.020 x 900 x 1.200 mm︱
          Standard features: - Central rollers via electric motor, planetary reduction gear and Gear drive driven - Swivel top roller - Main engine with brake device - Conical bending device - Mobile controller and foot pedal - CE mark / Declaration of Conformity Additional equipment: - motorized rear roller adjustment - Digital display for back roller - induction hardened rolls
            sheet width 1250 mm
            plate thickness 5,5 mm
            pre-bending 5,0 mm
            roll length 1280 mm
            min. dia. 210 mm
            roll diam. toproll 140 mm
            weight 1365 kg
            range L-W-H 2.020 x 900 x 1.200 mm
            Description :
            Standard features:
            - Central rollers via electric motor, planetary reduction gear and
            Gear drive driven
            - Swivel top roller
            - Main engine with brake device
            - Conical bending device
            - Mobile controller and foot pedal
            - CE mark / Declaration of Conformity

            Additional equipment:
            - motorized rear roller adjustment
            - Digital display for back roller
            - induction hardened rolls


        • Bästlein
        • Augsburger Str. 56
        • 89312 Günzburg
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Rolls bending machine - 3 Rolls AK-BEND ASM-S 170-20/5


          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland

          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-4040310 · Rolls bending machine - 3 Rolls

          AK-BEND - ASM-S 170-20/5 - - Neu -

          Technical details
          sheet width 3100 mm︱plate thickness 6 mm︱pre-bending 5 mm︱upper roll diameter 170 mm︱min. bending diameter Ø 255 mm︱bending speed 4,5 m/min︱total power requirement 4 kW︱weight of the machine ca. 2300 kg︱dimensions of the machine ca. 3800x1100x1130 mm︱
            sheet width 3100 mm
            plate thickness 6 mm
            pre-bending 5 mm
            upper roll diameter 170 mm
            min. bending diameter Ø 255 mm
            bending speed 4,5 m/min
            total power requirement 4 kW
            weight of the machine ca. 2300 kg
            dimensions of the machine ca. 3800x1100x1130 mm


        • Bästlein
        • Augsburger Str. 56
        • 89312 Günzburg
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Rolls bending machine - 3 Rolls AK-BEND ASM-S 200-30/5


          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland

          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-4040284 · Rolls bending machine - 3 Rolls

          AK-BEND - ASM-S 200-30/5 - - Neu -

          Technical details
          sheet width 3100 mm︱plate thickness 6 mm︱pre-bending 5 mm︱upper roll diameter 200 mm︱min. bending diameter Ø 300 mm︱bending speed 5 m/min︱total power requirement 5,5 kW︱weight of the machine ca. 4.000 kg︱dimensions of the machine ca. 4800x1300x1270 mm︱
            sheet width 3100 mm
            plate thickness 6 mm
            pre-bending 5 mm
            upper roll diameter 200 mm
            min. bending diameter Ø 300 mm
            bending speed 5 m/min
            total power requirement 5,5 kW
            weight of the machine ca. 4.000 kg
            dimensions of the machine ca. 4800x1300x1270 mm


        • Bästlein
        • Augsburger Str. 56
        • 89312 Günzburg
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Rolls bending machine - 3 Rolls AK-BEND AS 70-10/1,5


          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland

          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-4040307 · Rolls bending machine - 3 Rolls

          AK-BEND - AS 70-10/1,5 - - NEU -

          Technical details
          sheet width 1050 mm︱plate thickness 1,8 mm︱pre-bending 1,5 ︱upper roll diameter 70 mm︱min. dia. 105 mm︱total power requirement 1,1 kW︱weight of the machine ca. 320 kg︱dimensions of the machine ca. 1700x700x1100 mm︱
            sheet width 1050 mm
            plate thickness 1,8 mm
            pre-bending 1,5
            upper roll diameter 70 mm
            min. dia. 105 mm
            total power requirement 1,1 kW
            weight of the machine ca. 320 kg
            dimensions of the machine ca. 1700x700x1100 mm


        • Bästlein
        • Augsburger Str. 56
        • 89312 Günzburg
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Rolls bending machine - 3 Rolls AK-BEND ASM 130-15/4,0


          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland

          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-4040091 · Rolls bending machine - 3 Rolls

          AK-BEND - ASM 130-15/4,0 - - Neu -

          Technical details
          sheet width 1550 mm︱plate thickness 4,5 mm︱pre-bending 4,0 mm︱roll length 1550 mm︱min. dia. 190 mm︱roll diam. toproll 130 mm︱weight 1265 kg︱dimensions 2670x1110x1050 mm︱
          Domestic equipments: - Central rollers via electric motor, planetary reduction gear and Gear drive driven - Swivel top roller - Main engine with brake device - Conical bending device - Mobile controller and foot pedal - CE mark / Declaration of Conformity Additional equipment: - induction hardened rolls - motorized rear roller adjustment - Digital display for back roller
            sheet width 1550 mm
            plate thickness 4,5 mm
            pre-bending 4,0 mm
            roll length 1550 mm
            min. dia. 190 mm
            roll diam. toproll 130 mm
            weight 1265 kg
            dimensions 2670x1110x1050 mm
            Description :
            Domestic equipments:
            - Central rollers via electric motor, planetary reduction gear and
            Gear drive driven
            - Swivel top roller
            - Main engine with brake device
            - Conical bending device
            - Mobile controller and foot pedal
            - CE mark / Declaration of Conformity

            Additional equipment:
            - induction hardened rolls
            - motorized rear roller adjustment
            - Digital display for back roller


        • Bästlein
        • Augsburger Str. 56
        • 89312 Günzburg
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Rolls bending machine - 3 Rolls ROLLMAK SM 90-12/3.0


          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland

          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-4040359 · Rolls bending machine - 3 Rolls

          ROLLMAK - SM 90-12/3.0 - - NEU -

          Technical details
          sheet width 1256 mm︱plate thickness 3 mm︱pre-bending 2,5 ︱frequency 50 Hz︱volt 400 V︱0 90 mm︱min. dia. 130 mm︱total power requirement 1.1 kW︱weight of the machine ca. 545 kg︱dimensions of the machine ca. 1.1 m︱
            sheet width 1256 mm
            plate thickness 3 mm
            pre-bending 2,5
            frequency 50 Hz
            volt 400 V
            0 90 mm
            min. dia. 130 mm
            total power requirement 1.1 kW
            weight of the machine ca. 545 kg
            dimensions of the machine ca. 1.1 m


        • Bästlein
        • Augsburger Str. 56
        • 89312 Günzburg
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Rolls bending machine - 3 Rolls HBM HBM 1x610 mm


          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland

          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-4040336 · Rolls bending machine - 3 Rolls

          HBM - HBM 1x610 mm - - NEU -

          Technical details
          plate width 610 mm︱plate thickness 1 mm︱roll diameter 38 mm︱
            plate width 610 mm
            plate thickness 1 mm
            roll diameter 38 mm


        • Bästlein
        • Augsburger Str. 56
        • 89312 Günzburg
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Rolls bending machine - 3 Rolls AK-BEND ASM 140-20/4,0


          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland

          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-4040078 · Rolls bending machine - 3 Rolls

          AK-BEND - ASM 140-20/4,0 - - Neu -

          Technical details
          sheet width 2050 mm︱plate thickness 4,5 mm︱pre-bending 4,0 mm︱min. dia. 210 mm︱roll diameter 140 mm︱weight of the machine ca. 1530 kg︱dimensions of the machine ca. 3220x1200x900 mm︱
          Standard features: - Central rollers via electric motor, planetary reduction gear and Gear drive driven - Swivel top roller - Main engine with brake device - Conical bending device - Mobile controller and foot pedal - CE mark / Declaration of Conformity Additional equipment: - motorized rear roller adjustment - Digital display for back roller - induction hardened rolls
            sheet width 2050 mm
            plate thickness 4,5 mm
            pre-bending 4,0 mm
            min. dia. 210 mm
            roll diameter 140 mm
            weight of the machine ca. 1530 kg
            dimensions of the machine ca. 3220x1200x900 mm
            Description :
            Standard features:
            - Central rollers via electric motor, planetary reduction gear and
            Gear drive driven
            - Swivel top roller
            - Main engine with brake device
            - Conical bending device
            - Mobile controller and foot pedal
            - CE mark / Declaration of Conformity

            Additional equipment:
            - motorized rear roller adjustment
            - Digital display for back roller
            - induction hardened rolls


        • Bästlein
        • Augsburger Str. 56
        • 89312 Günzburg
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Rolls bending machine - 3 Rolls ROLLMAK SM 90-10/3.3


          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland

          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-4040358 · Rolls bending machine - 3 Rolls

          ROLLMAK - SM 90-10/3.3 - - NEU -

          Technical details
          sheet width 1050 mm︱plate thickness 3,3 mm︱pre-bending 3 ︱volt 400 V︱frequency 50 Hz︱0 90 mm︱min. dia. 130 mm︱total power requirement 1,1 kW︱weight of the machine ca. 490 kg︱dimensions of the machine ca. 1650x1200x700 m︱
            sheet width 1050 mm
            plate thickness 3,3 mm
            pre-bending 3
            volt 400 V
            frequency 50 Hz
            0 90 mm
            min. dia. 130 mm
            total power requirement 1,1 kW
            weight of the machine ca. 490 kg
            dimensions of the machine ca. 1650x1200x700 m


        • Bästlein
        • Augsburger Str. 56
        • 89312 Günzburg
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Rolls bending machine - 3 Rolls AK-BEND A 56-10/1,0


          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland

          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-4040209 · Rolls bending machine - 3 Rolls

          AK-BEND - A 56-10/1,0 - - NEU -

          Technical details
          sheet width 1050 mm︱plate thickness 1 mm︱roll diameter 56 mm︱dimensions of the machine ca. 1600 x 700 x 1050 mm︱
          Domestic equipments: - Upper roller can be swung out manually
            sheet width 1050 mm
            plate thickness 1 mm
            roll diameter 56 mm
            dimensions of the machine ca. 1600 x 700 x 1050 mm
            Description :
            Domestic equipments:
            - Upper roller can be swung out manually


        • Bästlein
        • Augsburger Str. 56
        • 89312 Günzburg
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Rolls bending machine - 3 Rolls BERNARDO MRB 2050x 4


          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland

          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-4040361 · Rolls bending machine - 3 Rolls

          BERNARDO - MRB 2050x 4 - - 2010 -

          Technical details
          sheet width 2050 mm︱plate thickness 4,5 mm︱pre-bending 4,0 mm︱roll diameter 140 mm︱engine output 2,2 kW︱machine weight ab. 1.530 kg︱dimensions 2820 x 900 x 1200 mm︱
            sheet width 2050 mm
            plate thickness 4,5 mm
            pre-bending 4,0 mm
            roll diameter 140 mm
            engine output 2,2 kW
            machine weight ab. 1.530 kg
            dimensions 2820 x 900 x 1200 mm


        • Bästlein
        • Augsburger Str. 56
        • 89312 Günzburg
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Rolls bending machine - 3 Rolls KNUTH KRM 20/1,5


          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland

          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-4040365 · Rolls bending machine - 3 Rolls

          KNUTH - KRM 20/1,5 - - 1999 -

          Technical details
          sheet width 2050 mm︱plate thickness 1,5 mm︱roll diameter 95 mm︱weight of the machine ca. 700 kg︱
            sheet width 2050 mm
            plate thickness 1,5 mm
            roll diameter 95 mm
            weight of the machine ca. 700 kg


        • Bästlein
        • Augsburger Str. 56
        • 89312 Günzburg
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Rolls bending machine - 3 Rolls FASTI 109-30-6


          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland

          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-4040364 · Rolls bending machine - 3 Rolls

          FASTI - 109-30-6 - - -

          Technical details
          sheet width 3040 mm︱plate thickness 6 mm︱voltage 380 V︱voltage 220 V︱frequency 50 Hz︱weight of the machine ca. 5200 kg︱
            sheet width 3040 mm
            plate thickness 6 mm
            voltage 380 V
            voltage 220 V
            frequency 50 Hz
            weight of the machine ca. 5200 kg


        • Bästlein
        • Augsburger Str. 56
        • 89312 Günzburg
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Rolls bending machine - 3 Rolls RAS


          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland

          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-4040367 · Rolls bending machine - 3 Rolls

          RAS - - - -

          Technical details
          sheet width 2500 mm︱plate thickness 2 mm︱
            sheet width 2500 mm
            plate thickness 2 mm


        • Bästlein
        • Augsburger Str. 56
        • 89312 Günzburg
        • Deutschland

        • Datasheet
          Request / Contact
          •   
          •   
          • 1  
          •   
          •   


          Find a 3-roll bending machine for your business needs
          Discover the versatility of a 3-roll bending machine

          Roll benders employ rollers situated on a jig to form curves and arcs in a variety of metals. The process is critical to metalworking for a wide variety of industries. A 3-roll bending machine is one of the most commonly used pieces of equipment for plate bending if you're looking for your next 3-roll bending machine check out the huge selection available at LagerMaschinen. You're sure to find just the used machine to suit both your business and your budget.

          A 3-roll bending machine is crucial to your metalworking business

          There are a wide variety of custom metalworking tools available on the market today. Even within a specific category industry professionals have a lot of choices available to them. For example a 3-roll bending machine can encompass a range of different sizes and speeds. It may operate vertically or horizontally and be manually or electronically controlled. No matter what your needs are when shopping for your next 3-roll bending machine you can find quality used machinery at LagerMaschinen.

          Buying used machinery gives you the most bang for you buck

          If you're looking to make the most of your time and money consider shopping for used machinery online. LagerMaschinen is your leading source for the best selection of machines like a 3-roll bending machine. The easy-to-use interface makes shopping for equipment for your business a breeze. Shop from the comfort of your home or office search by price or location and enjoy the hassle-free shopping experience that LagerMaschinen can provide!


          Your next 3-roll plate bending machine from LagerMaschinen
          Find the best 3-roll plate bending machine for your needs

          Roll bending is a process used in the manufacturing of ductile materials like sheet metal. This process creates rounded shapes by passing materials repeatedly through a series of rollers in order to create uniform curvature with minimal damage to the surface of the materials. A 3-roll plate bending machine is ideal for creating arched shapes in sheet metal and other materials. If you're shopping for a 3-roll plate bending machine check out the variety of used machines available at LagerMaschinen.

          The advantages of roll bending are numerous

          Roll bending is one of the favoured methods for the creation of curves in sheet metal. As the process is relatively simple it doesn't require a large amount of manpower or constant supervision to complete. When you invest in a 3-roll plate bending machine you can rest assured that the end product will be durable and the cost to you and your company will be minimal. Find your next 3-roll plate bending machine at LagerMaschinen.

          Convenience meets quality at LagerMaschinen

          Investing in industrial metalworking machinery such as a 3-roll plate bending machine can be a daunting and sometimes stressful process. LagerMaschinen aims to take all the hassle out of shopping for your business by offering you a user-friendly site that lets you browse used equipment by price model or location. You can quickly and easily find the perfect used machinery for your needs from the comfort of your home or office using LagerMaschinen.