European network of stockholding machinery dealers

Bitte einen Suchbegriff eingeben - Please enter a search term
Category:
    Manufacturer:
      Machines:
        Trader:

          Plate Bending Machine - 4 Rolls

          Machinelist: Plate Bending Machine - 4 Rolls


          Plate Bending Machine - 4 Rolls

          used Sheet metal working / shaeres / bending Plate Bending Machine - 4 Rolls MG AK 206 P


          • Frech GmbH
          • Werderstr. 82
          • 74889 Sinsheim
          • Deutschland

          • 0049-7261-1011
            0049-7261-63966
          • info@frech-maschinen.de
            www.frech-maschinen.de
          #1073-55667 · Plate Bending Machine - 4 Rolls

          MG - AK 206 P - - 2007 -

          Technical details
          sheet width 2050 mm︱plate thickness 6,00 mm︱pre-bending 4,00 mm︱diameter of upper rolls 160 mm︱diameter of lower rolls 140 mm︱total power requirement 2,2 kW︱weight of the machine ca. 3.000 kg︱dimensions of the machine ca. 3500 x 1500 x 1300 mm︱
          ** New price ~ 48.000 euros ** from a repair workshop - good condition (!) Furnishing: - hydraulic 4-roller bending machine - with conical bending device * Inclination of the bottom roller and the side rollers * Alignment in parallelism in each side roller position * Hardened stop roller * Workpiece limitation for a cone with a 45° pitch: * Working length max: 60% * Bending capacity max: 50% - pivoting operation - Digital displays (2 pieces) for the side roller position - Adjustable contact pressure of the bottom roller with manometer - hardened rollers SAE 1050 CK 45 - Conical bending device - Hydraulic folding store for removing closed pipes - Direct drive of the upper and lower roller (planetary gear) - Parallelism of the side rollers via torsion shafts - Permanent lubrication of all bearings - Security device - Bed. Instructions
            sheet width 2050 mm
            plate thickness 6,00 mm
            pre-bending 4,00 mm
            diameter of upper rolls 160 mm
            diameter of lower rolls 140 mm
            total power requirement 2,2 kW
            weight of the machine ca. 3.000 kg
            dimensions of the machine ca. 3500 x 1500 x 1300 mm
            Description :
            ** New price ~ 48.000 euros
            ** from a repair workshop - good condition (!)

            Furnishing:
            - hydraulic 4-roller bending machine
            - with conical bending device
            * Inclination of the bottom roller and the side rollers
            * Alignment in parallelism in each side roller position
            * Hardened stop roller
            * Workpiece limitation for a cone with a 45° pitch:
            * Working length max: 60%
            * Bending capacity max: 50%
            - pivoting operation
            - Digital displays (2 pieces) for the side roller position
            - Adjustable contact pressure of the bottom roller with manometer
            - hardened rollers SAE 1050 CK 45
            - Conical bending device
            - Hydraulic folding store for removing closed pipes
            - Direct drive of the upper and lower roller (planetary gear)
            - Parallelism of the side rollers via torsion shafts
            - Permanent lubrication of all bearings
            - Security device
            - Bed. Instructions
          Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Plate Bending Machine - 4 Rolls MG EH 123 P


          • Frech GmbH
          • Werderstr. 82
          • 74889 Sinsheim
          • Deutschland

          • 0049-7261-1011
            0049-7261-63966
          • info@frech-maschinen.de
            www.frech-maschinen.de
          #1073-55703 · Plate Bending Machine - 4 Rolls

          MG - EH 123 P - - 2001 - MG CNC

          Technical details
          sheet width 1230 mm︱plate thickness 3,00 mm︱pre-bending 1,50 mm︱upper roll diameter 80,0 mm︱lower roll diameter 120 mm︱side roll diameter 110 mm︱Control MG CNC ︱total power requirement 2,2 kW︱weight of the machine ca. 1160 kg.︱
          ** very good condition ** used very little (!!) Furnishing: - hydraulic four-roller round bending machine - mobile operation (CNC) - digital position displays of the rollers - Conical bending device - robust welded steel construction - hydraulic direct drive of the central rollers - hydraulic folding storage for removing pipes - Pressure gauge for hydraulic pressure display - Safety device - Machine documentation
            sheet width 1230 mm
            plate thickness 3,00 mm
            pre-bending 1,50 mm
            upper roll diameter 80,0 mm
            lower roll diameter 120 mm
            side roll diameter 110 mm
            Control MG CNC
            total power requirement 2,2 kW
            weight of the machine ca. 1160 kg.
            Description :
            ** very good condition
            ** used very little (!!)

            Furnishing:
            - hydraulic four-roller round bending machine
            - mobile operation (CNC)
            - digital position displays of the rollers
            - Conical bending device
            - robust welded steel construction
            - hydraulic direct drive of the central rollers
            - hydraulic folding storage for removing pipes
            - Pressure gauge for hydraulic pressure display
            - Safety device
            - Machine documentation

          Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Plate Bending Machine - 4 Rolls HÄUSLER VRM HY 4000x45


          • Frech GmbH
          • Werderstr. 82
          • 74889 Sinsheim
          • Deutschland

          • 0049-7261-1011
            0049-7261-63966
          • info@frech-maschinen.de
            www.frech-maschinen.de
          #1073-55697 · Plate Bending Machine - 4 Rolls

          HÄUSLER - VRM HY 4000x45 - - 2001 -

          Technical details
          sheet width 4000 mm︱plate thickness 40,00 mm︱pre-bending ︱total power requirement kW︱weight of the machine ca. 78 t︱dimensions of the machine ca. m︱
          Adjustable rollers 3 The rollers are adjusted hydraulically Top roller diameter 710 mm Bottom roller diameter 640 mm Side roller diameter 520 mm Working speed 2+4 m/min (up to 8m/min) Additional equipment Electronic synchronization Air-cooled oil cooler Upper support device Lateral cylinder support device (10t) Infeed table (20t) hydr. Bladder storage Cone bending device
            sheet width 4000 mm
            plate thickness 40,00 mm
            weight of the machine ca. 78 t
            Description :
            Adjustable rollers 3
            The rollers are adjusted hydraulically
            Top roller diameter 710 mm
            Bottom roller diameter 640 mm
            Side roller diameter 520 mm
            Working speed 2+4 m/min (up to 8m/min)

            Additional equipment
            Electronic synchronization
            Air-cooled oil cooler
            Upper support device
            Lateral cylinder support device (10t)
            Infeed table (20t)
            hydr. Bladder storage
            Cone bending device
          Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Plate Bending Machine - 4 Rolls OMCCA HDTS 2050.10.8


          • Frech GmbH
          • Werderstr. 82
          • 74889 Sinsheim
          • Deutschland

          • 0049-7261-1011
            0049-7261-63966
          • info@frech-maschinen.de
            www.frech-maschinen.de
          #1073-55685 · Plate Bending Machine - 4 Rolls

          OMCCA - HDTS 2050.10.8 - - 1993 -

          Technical details
          sheet width 2050 mm︱plate thickness 10,00 mm︱pre-bending capacity 8,00 mm︱upper roll diameter 220 mm︱side roll diameter 200 mm︱lower roll diameter 220 mm︱bending speed 5,0 m/min︱total power requirement 7,5 kW︱weight of the machine ca. 5400 kg.︱range L-W-H 4100 x 1600 x 1400 mm︱
          Furnishing: - Robust electro-hydraulic 4-roller bending machine - with conical bending device * Inclination of the bottom roller and the side rollers * Alignment in parallelism in each side roller position * Hardened stop roller * Workpiece limitation for a cone with a 45° gradient: * Working length max: 60% * Bending capacity max: 50% - mobile, freely movable operating unit - driven top and side rollers * driven by a central unit * Aggregate = hydraulic motor / epidermal gear / oscillating transmission joints * Rollers in good to very good condition (!!) - digital position indicators for the reels - Adjustable contact pressure of the bottom roller with manometer - hardened rollers SAE 1050 CK 45 - Hydraulic folding store for removing closed pipes - manual central lubrication - User manual (IT)
            sheet width 2050 mm
            plate thickness 10,00 mm
            pre-bending capacity 8,00 mm
            upper roll diameter 220 mm
            side roll diameter 200 mm
            lower roll diameter 220 mm
            bending speed 5,0 m/min
            total power requirement 7,5 kW
            weight of the machine ca. 5400 kg.
            range L-W-H 4100 x 1600 x 1400 mm
            Description :
            Furnishing:
            - Robust electro-hydraulic 4-roller bending machine
            - with conical bending device
            * Inclination of the bottom roller and the side rollers
            * Alignment in parallelism in each side roller position
            * Hardened stop roller
            * Workpiece limitation for a cone with a 45° gradient:
            * Working length max: 60%
            * Bending capacity max: 50%
            - mobile, freely movable operating unit
            - driven top and side rollers
            * driven by a central unit
            * Aggregate = hydraulic motor / epidermal gear / oscillating transmission joints
            * Rollers in good to very good condition (!!)
            - digital position indicators for the reels
            - Adjustable contact pressure of the bottom roller with manometer
            - hardened rollers SAE 1050 CK 45
            - Hydraulic folding store for removing closed pipes
            - manual central lubrication
            - User manual (IT)


          Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Plate Bending Machine - 4 Rolls FACCIN HCI - 2050x6/4 mm


          • Frech GmbH
          • Werderstr. 82
          • 74889 Sinsheim
          • Deutschland

          • 0049-7261-1011
            0049-7261-63966
          • info@frech-maschinen.de
            www.frech-maschinen.de
          #1073-55704 · Plate Bending Machine - 4 Rolls

          FACCIN - HCI - 2050x6/4 mm - - 1992 -

          Technical details
          sheet width 2050 mm︱plate thickness 6,00 mm︱pre-bending ︱band thickness stainless steel 4,00 mm︱total power requirement kW︱weight of the machine ca. 8,00 t︱dimensions of the machine ca. 3,85 x 1,10 x 1,25 m︱
          • Mobile control panel • Top roller 185 mm • Lower roller 170 mm • Conical bending device
            sheet width 2050 mm
            plate thickness 6,00 mm
            band thickness stainless steel 4,00 mm
            weight of the machine ca. 8,00 t
            dimensions of the machine ca. 3,85 x 1,10 x 1,25 m
            Description :
            • Mobile control panel
            • Top roller 185 mm
            • Lower roller 170 mm
            • Conical bending device
          Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Plate Bending Machine - 4 Rolls RAS 1520 x 3.5 mm


          • Frech GmbH
          • Werderstr. 82
          • 74889 Sinsheim
          • Deutschland

          • 0049-7261-1011
            0049-7261-63966
          • info@frech-maschinen.de
            www.frech-maschinen.de
          #1073-55702 · Plate Bending Machine - 4 Rolls

          RAS - 1520 x 3.5 mm - - -

          Technical details
          sheet width 1520 mm︱plate thickness 3,50 mm︱pre-bending 3.0 mm︱diameter of upper rolls 95.0 mm︱diameter of lower rolls 95.0 mm︱side roll diameter 95.0 mm︱adjustment UW 12.0 mm︱voltage 400 V︱total power requirement 0.8 / 1.1 kW︱weight of the machine ca. ca. 1250 kg︱range L-W-H 2130 x 1300 x 1400 mm︱
          Furnishing: - electric motor four-roller round bending machine - robust electric drive - asymmetrical roller arrangement - manual delivery of the 4x rollers - swing-out top roller, including folding bearing - Rollers including profile inlets - 2x bending speeds - Connection cable + plug
            sheet width 1520 mm
            plate thickness 3,50 mm
            pre-bending 3.0 mm
            diameter of upper rolls 95.0 mm
            diameter of lower rolls 95.0 mm
            side roll diameter 95.0 mm
            adjustment UW 12.0 mm
            voltage 400 V
            total power requirement 0.8 / 1.1 kW
            weight of the machine ca. ca. 1250 kg
            range L-W-H 2130 x 1300 x 1400 mm
            Description :
            Furnishing:
            - electric motor four-roller round bending machine
            - robust electric drive
            - asymmetrical roller arrangement
            - manual delivery of the 4x rollers
            - swing-out top roller, including folding bearing
            - Rollers including profile inlets
            - 2x bending speeds
            - Connection cable + plug


          Datasheet
          Request / Contact
          •   
          •   
          • 1  
          •   
          •   

            Trader Profile:   Frech GmbH

          Contact Trader



            Frech GmbH
           Werderstr. 82
            74889 - Sinsheim
            Deutschland
            0049-7261-1011">0049-7261-1011
            0049-7261-63966
            info@frech-maschinen.de
            www.frech-maschinen.de

          Profile of Trader

          Founded in 1945 by Karl Frech and having Mrs Nicole Frech as its 3rd generation manager, the company can look back on over 60 years of business tradition in the town of Sinsheim near Heidelberg in the German Baden region. 

          Sinsheim is located on the A6 motorway, at a distance of an one hour drive on the motorway from the airports Frankfurt/Main and Stuttgart. FRECH GmbH is specialised in dealing with used equipment (decoilers, recoilers, roller levellers, coil-lines, roll forming lines, slitting lines, cut-to-length lines, cold rolling mills and roll grinders). 

          Furthermore the FRECH-Team is acting as an agent in the following fields of used machinery: coil-cars, folding machines, grinding machines, press brakes, presses, scrap-metal-coilers and shears. Contact us please !!! - we will help you also in other areas. In an area of about 1000 square metres of halls and retail floorspace we display a range of constantly varying second-hand machinery which are in proper working condition and, for the most part, fit for demonstration. 

          Why second-hand machinery? 

          Second-hand machines are most of the time immediately available and are ready for operation. Frech is your first address when you want to reduce your capital costs and increase your machinery’s economic efficiency. 

          Buying and selling second-hand machinery is a matter of trust – Frech is your best contact

          OUR CONTACTS




          Frech GmbH   74889 - Sinsheim Werderstr. 82 Deutschland
          Frech GmbH

          Werderstr. 82



          Contact Trader


            Frech GmbH
           Werderstr. 82
            74889 - Sinsheim
            Deutschland
            0049-7261-1011
            0049-7261-63966
            info@frech-maschinen.de
            www.frech-maschinen.de
            Contact person:

           




          Machine category


          Abkantpresse - hydraulisch · Abwickelhaspel · Abwickelhaspel - Doppel · Blechbiegemaschine - 3 Walzen · Blechbiegemaschine - 4 Walzen · Coilanlage · Lochstanze · Längsteilanlage · Profilstahlschere · Querteilanlage · Richtmaschine · Schwenkbiegemaschine · Tafelschere - hydraulisch · Tafelschere - mechanisch ·