Sheet metal working - shaeres - bending

pressure 28 t︱stroke 180 mm︱table-size 300 x 550 mm︱diameter of piston 130 mm︱work speed min. 2 m/sec︱work speed max. 9,8 m/sec︱return speed 20 mm/sec︱Max. pressure 200 bar︱weight of the machine ca. 0,65 t︱total power requirement 4 kW︱dimensions of the machine ca. 1,15 x 0,75 x 1,1 m︱

---

• The horizontal bending and straightening press from Profi Press is a universal one Hydraulic press specially designed for performing bending, profiling and Straightening work is designed. The applications of the machine are different and depend on the accessories that are on the work table, the Tool holder and are installed in the holes and pin holes. • The HB-28 model is used for light bending measurements on the work table equipped with an angle scale, and the press can also be equipped with tools are supplied (for example block punching) that are placed on the tool holder Can be assembled, as well as tools that are in the holes and pin holes can be installed to carry out various types of work. • The hydraulic system can be adjusted with the help of the pressure and flow adjustment valves can be regulated, which is the pressing force and the speed of the press influence. The press is equipped with a built-in manometer. • The control panel is used to operate and display the piston stroke and for Choice between manual or automatic operation, and the HB-28 model is also with a built-in memory for up to 4 different programs fitted. • Operation is via electric foot pedals. • The Profi Press HB-28 model can be equipped with various optional accessories hearing parts and tools for installation on the workbench and the Tool holder to be delivered.

pressure 28 t︱piston stroke 180 mm︱diameter of piston 130 mm︱table-size 300 x 550 mm︱working feed 2 - 9,8 mm/sek︱return speed 20 mm/sec︱Max. pressure 200 bar︱bending capacity - flat iron 200 x 10 mm︱weight of the machine ca. 800 kg︱dimensions ca. 1150 x 1103 x 750 mm︱

---

The horizontal hydraulic press (28 ton) can be used for many different metal working jobs. The press has a piston stroke of 192 mm and can be equipped with all kinds of tooling for specific bending or straightening jobs. We supply a standard toolingset with this press including a stampholder and backgauge. However, we also produce custom-made tooling for your specific request. Thanks to the NC-control you can easily set the cylinder stroke and save up to 100 working cycles. With this horizontal hydraulic press you are able to bend, straighten, notch, cut and form. A universal hydraulic press that serves all your needs in cold metal working processes.

angle steel/side length 40 x 40 x 5 mm︱U-iron on the x-axis 80 x 45 x 5 mm︱roll diameter - bore 40 mm︱roll diameter -toolpieces 150 mm︱turning speeds 10 U/min︱voltage 400 V / 50 Hz︱total power requirement 1,5 kW︱weight of the machine ca. 0,3 t︱dimensions of the machine ca. 0,8 x 0,92 x 1,4 m︱

---

Machine has standard roller set for profile: Flat (upright) 60 x 10, manual infeed of the upper roller, feed path 72 mm, operation with foot pedal, working position horizontal or vertical, Other roller sets optionally available,

50 mm︱roll diameter 150 mm︱revolutions per minute 10 U/min︱voltage 400 V / 50 V︱adjustment movement hydraulic up to 120 mm︱motor speed 1400 U/min︱total power requirement 1,5 kW︱weight of the machine ca. 430 kg︱dimensions of the machine ca. 1200 x 800 x 1750 mm︱

---

Horizontal and vertical position, optionally two or three driven rollers, standard roller set included, lateral guide rollers, foot pedal with safety button, according to CE, operating instructions, all roller sets for round profiles can be ordered additionally

angular steel - leg outwards -- mm︱double T-iron on the x-axis -- mm︱U-iron on the x-axis -- mm︱ 50 mm︱ 150 mm︱throat 120 mm︱total power requirement 1,5 kW︱weight of the machine ca. 0,36 t︱dimensions of the machine ca. 1,1 x 0,8 x 1,4 m︱

---

Exhibition machine **NEW, year of construction: 2021** The PB 50-3 is a profile bending machine with manual adjustment of thetoprollervia a handwheel. The profile bending machine can be used in vertical and horizontal working position and are equipped with three driven rollers. The change between two or three driven rollers is done simply by the side handle of the machine. - Manual adjustment of the top roller with a handwheel - Vertical and horizontal work possibility - 3 driven rollers - Supplied with a standard roller set - Foot pedal

pressure 100 t︱stroke 380 mm︱table surface area 1100 x 300 mm︱pressure 981 kN︱Pressure power 258 bar︱working width 1100 mm︱pressing speed 2,47 mm/sec︱feed speeds 7,54 mm/min︱return speed 9,06 mm/sec︱speeds 3000 U/min︱oil volume l︱IP protection class ︱total power requirement 2,2 kW︱weight of the machine ca. 1000 kg︱dimensions 1700 x 900 x 2200 mm︱

---

Movable cylinder (left-right) Integrated pressure manometer Pressure regulation Hydraulic unit with two speeds In height adjustable working table Joystick for the control of the piston Hand pump for precise press work