European network of stockholding machinery dealers

Bitte einen Suchbegriff eingeben - Please enter a search term
Category:
    Manufacturer:
      Machines:
        Trader:

          Band Saw - Automatic

          Machinelist: Band Saw - Automatic


          Band Saw - Automatic

          used Saws Band Saw - Automatic MEP SHARK 332-1 NC 5.0


          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland

          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-5010716 · Band Saw - Automatic

          MEP - SHARK 332-1 NC 5.0 - - Neu -

          Technical details
          dimensions of saw-band 3650x27x0,9 mm︱speed 15-100 m/min︱vice 335 mm︱capacity 90 degrees: round 300 mm︱capacity 90 degrees: square 260 mm︱capacity 90 degrees: flat 330x260 mm︱capacity 45 degrees: round 260/200 mm︱capacity 45 degrees: square 250/180 mm︱capacity 45 degrees: flat 270x200/200x160 mm︱capacity 60 degrees: round 180 mm︱capacity 60 degrees: square 170 mm︱capacity 60 degrees: flat 170x170 mm︱total power requirement 2,2 kW︱weight 1.105 kg︱dimensions 2700x2300x1800 mm︱
          Fully automatic electro-hydraulic band saw with multi-micro processors and additionally semi-automatic, semi-automatic-dynamic and manual Function. - Automatic cycle (cuts from 0 ° to 60 ° link). CNC machine with two controlled axes that allow for the same material thickness 1000 various editing programs, each with a different cutting length and quantity, too program. - Semi-automatic, semi-automatic-dynamic and manual cycle (cuts from 45 ° right to 60 ° left) - Semiautomatic dynamic system (manual lowering of the saw band bow up to the desired position and cycle start via the push button.) - Manual or semi-automatic-dynamic cycle to cut directly without Programming. Some features: - New fieldbus communication system (Modbus protocol) - Display with 20 characters x 4 lines to display the technical parameters such as: - Saw blade speed - Number of programmed and executed cuts - saw blade thickness - feed length - cutting time - ammeter - belt tension - Display of (about 100) diagnostic messages and warnings, everything in the respective user language. - Display and entry of the alarm and error messages with the possibility of display incidents that have occurred. - automatic parameter setting via control, if a new driver or Inverter is mounted. - Electronic inverter for continuous regulation of the belt speed of 15 up to 100 m / min. - New hydraulic control unit of the latest generation, highly efficient and with low energy consumption. - New material supply of 600 mm with stepper motor and ball screw mounted on opposite ball bearings. - Hublauf the saw blade directly from the control panel programmable, for Adaptation to the cutting material. - Electronic band tension control. - Automatic monitoring of the cutting load by a direct on the Cylinder mounted servo valve. - The coolant sump (equipped with 2 electric pumps for lubrication and Cooling of the saw blade) is installed in the base. - Swarf drawer (can be replaced by a chip conveyor - see Optional) - Preparation for the installation of the minimum lubrication set of the saw blade (Optional), in addition to conventional standard lubrication with emulsion oil. Chip removal brush. - Machine is intended for lifting truck transport. - Bi-metal saw band for solid and profile material.
            dimensions of saw-band 3650x27x0,9 mm
            speed 15-100 m/min
            vice 335 mm
            capacity 90 degrees: round 300 mm
            capacity 90 degrees: square 260 mm
            capacity 90 degrees: flat 330x260 mm
            capacity 45 degrees: round 260/200 mm
            capacity 45 degrees: square 250/180 mm
            capacity 45 degrees: flat 270x200/200x160 mm
            capacity 60 degrees: round 180 mm
            capacity 60 degrees: square 170 mm
            capacity 60 degrees: flat 170x170 mm
            total power requirement 2,2 kW
            weight 1.105 kg
            dimensions 2700x2300x1800 mm
            Description :
            Fully automatic electro-hydraulic band saw with multi-micro processors and
            additionally semi-automatic, semi-automatic-dynamic and manual
            Function.

            - Automatic cycle (cuts from 0 ° to 60 ° link). CNC machine with two
            controlled axes that allow for the same material thickness 1000
            various editing programs, each with a different cutting length and quantity, too
            program.
            - Semi-automatic, semi-automatic-dynamic and manual cycle (cuts
            from 45 ° right to 60 ° left)
            - Semiautomatic dynamic system (manual lowering of the saw band bow up to the
            desired position and cycle start via the push button.)
            - Manual or semi-automatic-dynamic cycle to cut directly without
            Programming.

            Some features:

            - New fieldbus communication system (Modbus protocol)
            - Display with 20 characters x 4 lines to display the technical parameters such as:
            - Saw blade speed - Number of programmed and executed cuts
            - saw blade thickness - feed length - cutting time - ammeter - belt tension -
            Display of (about 100) diagnostic messages and warnings, everything in the
            respective user language.
            - Display and entry of the alarm and error messages with the possibility of
            display incidents that have occurred.
            - automatic parameter setting via control, if a new driver or
            Inverter is mounted.
            - Electronic inverter for continuous regulation of the belt speed of 15
            up to 100 m / min.
            - New hydraulic control unit of the latest generation, highly efficient
            and with low energy consumption.
            - New material supply of 600 mm with stepper motor and ball screw
            mounted on opposite ball bearings.
            - Hublauf the saw blade directly from the control panel programmable, for
            Adaptation to the cutting material.
            - Electronic band tension control.
            - Automatic monitoring of the cutting load by a direct on the
            Cylinder mounted servo valve.
            - The coolant sump (equipped with 2 electric pumps for lubrication and
            Cooling of the saw blade) is installed in the base.
            - Swarf drawer (can be replaced by a chip conveyor - see
            Optional)
            - Preparation for the installation of the minimum lubrication set of the saw blade
            (Optional), in addition to conventional standard lubrication with emulsion oil.
            Chip removal brush.
            - Machine is intended for lifting truck transport.
            - Bi-metal saw band for solid and profile material.


        • Bästlein
        • Augsburger Str. 56
        • 89312 Günzburg
        • Deutschland

        • Datasheet
          Request / Contact
          used Saws Band Saw - Automatic MEP SHARK 331-1 NC SPIDER 5.0


          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland

          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-5010819 · Band Saw - Automatic

          MEP - SHARK 331-1 NC SPIDER 5.0 - - Neu -

          Technical details
          dimensions of saw-band 3650x27x0,9 mm︱speed 15/100 m/min︱capacity 90 degrees: round 280 mm︱capacity 90 degrees: square 260 mm︱capacity 90 degrees: flat 330x260 mm︱capacity 45 degrees: round 260 mm︱capacity 45 degrees: square 250 mm︱capacity 45 degrees: flat 270x200 mm︱capacity 60 degrees: round 180 mm︱capacity 60 degrees: square 170 mm︱capacity 60 degrees: flat 170x170 mm︱total power requirement 2,2 kW︱weight 1240 kg︱vice 340 mm︱dimensions 2020x2040x1740 mm︱
          Electro-hydraulic fully automatic band saw with additional, semi-automatic Function, for cuts from 0 ° to 60 ° left. Compact machine with the new Windows "CE" based MEP-50 controller and 7 "touch-screen display for managing all machine parameters. Easy operation and control of all cutting parameters in real time. Material feed with stepper motor via ball screw, which are mounted on opposite ball bearings; Single stroke 600 mm - repeatable to saw any length. Simple programming - Enter cutting length and quantity and press "START". - Electronic band tension control - Automatic monitoring of the cutting load by a servo-valve mounted directly on the cylinder - Rotation control of the belt with immediate stop in case of a blocked saw band Späneräumbürste and emulsion coolant pump as standard.
            dimensions of saw-band 3650x27x0,9 mm
            speed 15/100 m/min
            capacity 90 degrees: round 280 mm
            capacity 90 degrees: square 260 mm
            capacity 90 degrees: flat 330x260 mm
            capacity 45 degrees: round 260 mm
            capacity 45 degrees: square 250 mm
            capacity 45 degrees: flat 270x200 mm
            capacity 60 degrees: round 180 mm
            capacity 60 degrees: square 170 mm
            capacity 60 degrees: flat 170x170 mm
            total power requirement 2,2 kW
            weight 1240 kg
            vice 340 mm
            dimensions 2020x2040x1740 mm
            Description :
            Electro-hydraulic fully automatic band saw with additional, semi-automatic
            Function, for cuts from 0 ° to 60 ° left.
            Compact machine with the new Windows "CE" based MEP-50 controller
            and 7 "touch-screen display for managing all machine parameters.
            Easy operation and control of all cutting parameters in real time.
            Material feed with stepper motor via ball screw, which are mounted on opposite ball bearings;
            Single stroke 600 mm - repeatable to saw any length. Simple programming - Enter cutting length and quantity and press "START".
            - Electronic band tension control
            - Automatic monitoring of the cutting load by a servo-valve mounted directly on the cylinder
            - Rotation control of the belt with immediate stop in case of a blocked saw band

            Späneräumbürste and emulsion coolant pump as standard.


        • Bästlein
        • Augsburger Str. 56
        • 89312 Günzburg
        • Deutschland

        • Datasheet
          Request / Contact
          •   
          •   
          • 1  
          •   
          •   


          LagerMaschinen: the best source for an automatic band saw
          Find your next automatic band saw at LagerMaschinen

          An automatic band saw has a wide variety of functions for both amateur craftsmen and industrial experts alike. This versatile tool can be used to cut both wood and metal. They are also a great choice for environmentally conscious consumers as they can be powered by steam wind or water in addition to electricity or gas. If you're looking for an automatic band saw for home or business use try LagerMaschinen's user-friendly search engine to find the best used machines for your needs.

          Optimize your time and money with an automatic band saw

          An automatic band saw is ideal for cutting irregular shapes and curves with a high level of accuracy and efficiency due to the regular tooth distribution on the blade. Depending on the size and material makeup of the blade a band saw can be used to cut a wide variety of materials from wood to heavy metal. An automatic band saw offers the additional benefit of increased speed and precision by using Computer Numerical Control (CNC).

          Used machines are a practical for your home or business

          If you're looking for a way to make the most of both your time and money why not shop for you next automatic band saw--or any other used machines--at LagerMaschinen? The user-friendly layout enables users to search by location price or brand making it easy to find the perfect automatic band saw for your unique business or personal needs. Shopping online is a great way to enjoy a hassle-free experience and get the most for your time and money.