European network of stockholding machinery dealers

Bitte einen Suchbegriff eingeben - Please enter a search term
Category:
    Manufacturer:
      Machines:
        Trader:

          Bed Type Milling Machine - Vertical

          Machinelist: Bed Type Milling Machine - Vertical


          Bed Type Milling Machine - Vertical

          used Milling machines Bed Type Milling Machine - Vertical WAGNER WBE1300R


          • Heinz Sanders GmbH
          • Fresenburger Weg 4
          • 49779 Niederlangen
          • Deutschland

          • +49 (0) 5939 9406 40
            +49 (0) 5939 9406 50
          • maschinen@heinz-sanders.de
            www.heinz-sanders.de
          #1125-3140034 · Bed Type Milling Machine - Vertical

          WAGNER - WBE1300R - - 2014 -

          Technical details
          x-travel 1300 mm︱y-travel 500 mm︱z-travel 570 mm︱spindle taper SK40 ︱spindle turning speed - stepless 60 - 6000 U/min︱rapid traverse x/y/z 7,5 m/min︱Number of tools 16 St.︱table surface area 1500 x 400 mm︱workpiece weight 700 kg︱total power requirement 12 kW︱weight of the machine ca. 4100 kg︱dimensions of the machine ca. 3800 x 3800 x 2800 mm︱
          - SIEMENS control SINUMERIK 828D - automatic tool clamping - Cooling device - automatic central lubrication - Chip tray - Full enclosure - Operation manual
            x-travel 1300 mm
            y-travel 500 mm
            z-travel 570 mm
            spindle taper SK40
            spindle turning speed - stepless 60 - 6000 U/min
            rapid traverse x/y/z 7,5 m/min
            Number of tools 16 St.
            table surface area 1500 x 400 mm
            workpiece weight 700 kg
            total power requirement 12 kW
            weight of the machine ca. 4100 kg
            dimensions of the machine ca. 3800 x 3800 x 2800 mm
            Description :
            - SIEMENS control SINUMERIK 828D
            - automatic tool clamping
            - Cooling device
            - automatic central lubrication
            - Chip tray
            - Full enclosure
            - Operation manual


        • Heinz Sanders GmbH
        • Fresenburger Weg 4
        • 49779 Niederlangen
        • Deutschland

        • Datasheet
          Request / Contact
          used Milling machines Bed Type Milling Machine - Vertical KIHEUNG Point U6


          • WMT GmbH & Co.KG
          • Siemensstraße 1
          • 46342 Velen-Ramsdorf
          • Deutschland

          • +49 2863 92477-47
            +49 2863 92477-50
          • info@w-m-t.de
            www.w-m-t.de
          #1108-33116 · Bed Type Milling Machine - Vertical

          KIHEUNG - Point U6 - - 2012 - Heidenhain TNC 124

          Technical details
          x-travel 1600 mm︱y-travel 710 mm︱z-travel 710 mm︱Control Heidenhain TNC 124 ︱turning speed range - main spindle 12 - 1600 min/-1︱tool taper SK50 ︱table surface area 2200 x 550 mm︱max. table load 3000 kg︱number of T-slots 5 ︱T-slot - width 20 mm︱T-slot - distance 9 mm︱rapid travel x/y/z 5 / 5 / 2,5 mm/min︱weight of the machine ca. 9 t︱dimensions of the machine ca. 3,5 x 2,80 x 2,75 m︱
          Universal bed milling machine - Huron head manual - automatic Tool clamping - Handwheel - Central lubrication - Machine light - Table enclosure - Footswitch - Documentation
            x-travel 1600 mm
            y-travel 710 mm
            z-travel 710 mm
            Control Heidenhain TNC 124
            turning speed range - main spind. 12 - 1600 min/-1
            tool taper SK50
            table surface area 2200 x 550 mm
            max. table load 3000 kg
            number of T-slots 5
            T-slot - width 20 mm
            T-slot - distance 9 mm
            rapid travel x/y/z 5 / 5 / 2,5 mm/min
            weight of the machine ca. 9 t
            dimensions of the machine ca. 3,5 x 2,80 x 2,75 m
            Description :
            Universal bed milling machine
            - Huron head manual
            - automatic Tool clamping
            - Handwheel
            - Central lubrication
            - Machine light
            - Table enclosure
            - Footswitch
            - Documentation


        • WMT GmbH & Co.KG
        • Siemensstraße 1
        • 46342 Velen-Ramsdorf
        • Deutschland

        • Datasheet
          Request / Contact
          used Milling machines Bed Type Milling Machine - Vertical KIHEUNG Point U6


          • Matthias Ehlers Werkzeugmaschinen
          • Nikolaus-Otto-Straße 19 + 21
          • 22946 Trittau
          • Deutschland

          • +49 (0)4154 - 986 99 12
            +49 (0)4154 - 986 99 14
          • anfrage@ehlers-wzm.de
            www.ehlers-wzm.de
          #2033-2023067 · Bed Type Milling Machine - Vertical

          KIHEUNG - Point U6 - - 2012 - Heidenhain TNC 124

          Technical details
          x-travel 1600 mm︱y-travel 720 mm︱z-travel 760 mm︱Control Heidenhain TNC 124 ︱main spindle: ︱turning speed range - main spindle 12 - 1600 min/-1︱tool taper SK50 ︱work table: ︱table surface area 2200 x 550 mm︱max. table load 3000 kg︱number of T-slots 5 ︱T-slot - width 20 mm︱T-slot - distance 80 mm︱feeds: ︱rapid travel x/y/z 5 / 5 / 2,5 mm/min︱weight of the machine ca. 8 t︱dimensions of the machine ca. 4,76 x 2,85 x 3,05 m︱
          In our opinion, the machine is in good condition and can be inspected under power by appointment. Technical features: - The machine has a universal milling head ***Accessories, tools and clamping devices shown are only part of the scope of delivery if this is noted in the additional information.*** ***Changes and errors in the technical data and information as well as Subject to prior sale!***
            x-travel 1600 mm
            y-travel 720 mm
            z-travel 760 mm
            Control Heidenhain TNC 124
            turning speed range - main spind. 12 - 1600 min/-1
            tool taper SK50
            table surface area 2200 x 550 mm
            max. table load 3000 kg
            number of T-slots 5
            T-slot - width 20 mm
            T-slot - distance 80 mm
            rapid travel x/y/z 5 / 5 / 2,5 mm/min
            weight of the machine ca. 8 t
            dimensions of the machine ca. 4,76 x 2,85 x 3,05 m
            Description :
            In our opinion, the machine is in good condition and
            can be inspected under power by appointment.

            Technical features:
            - The machine has a universal milling head

            ***Accessories, tools and clamping devices shown are only part of the scope of
            delivery if this is noted in the additional information.***

            ***Changes and errors in the technical data and information as well as
            Subject to prior sale!***


        • Matthias Ehlers Werkzeugmaschinen
        • Nikolaus-Otto-Straße 19 + 21
        • 22946 Trittau
        • Deutschland

        • Datasheet
          Request / Contact
          used Milling machines Bed Type Milling Machine - Vertical Kao Ming 332M Multi Face


          • Jansen Machinehandel BV
          • Bredaseweg 210
          • 4873 LA Etten-leur
          • Nederland

          • +31 (0) 76 5015750
          • info@jansenmachinehandel.nl
            www.jansenmachinehandel.nl
          #2049-F435 · Bed Type Milling Machine - Vertical

          Kao Ming - 332M Multi Face - - 2009 -

          Technical details
          CNC brand Fanuc ︱CNC model 18i-MB ︱Table length 3000 mm︱Table width 2600 mm︱Maximum table load 12 T︱X 3230 mm︱Y 3850 mm︱Z 1100 mm︱Spindle taper ISO 50 ︱Number of pallets 1 ︱Rapid traverse 10 m/min︱Speed 8000 RPM︱Tool changer 30 ︱Distance between columns 3200 mm︱Distance between spindle and table 1425 mm︱Along feed 5 mm/min︱Motor 22/26 kW︱Machine dimensions (lxwxh) 8130 x 7493 x 5080 mm︱Machine weight 44000 kg︱
          With chipconveyor and chip bucket Max. Table load: 12.000 kg Motor spil: 22/26 kW Tools vertical: - Length max. 350 mm - Diam. max. 130 mm ø - Max. diam with 3 places next to it occupied 200 mm ø - Max. weight 20 kg
            CNC brand Fanuc
            CNC model 18i-MB
            Table length 3000 mm
            Table width 2600 mm
            Maximum table load 12 T
            X 3230 mm
            Y 3850 mm
            Z 1100 mm
            Spindle taper ISO 50
            Number of pallets 1
            Rapid traverse 10 m/min
            Speed 8000 RPM
            Tool changer 30
            Distance between columns 3200 mm
            Distance between spindle and tab. 1425 mm
            Along feed 5 mm/min
            Motor 22/26 kW
            Machine dimensions (lxwxh) 8130 x 7493 x 5080 mm
            Machine weight 44000 kg
            Description :
            With chipconveyor and chip bucket
            Max. Table load: 12.000 kg
            Motor spil: 22/26 kW
            Tools vertical:
            - Length max. 350 mm
            - Diam. max. 130 mm ø
            - Max. diam with 3 places next to it occupied 200 mm ø
            - Max. weight 20 kg


        • Jansen Machinehandel BV
        • Bredaseweg 210
        • 4873 LA Etten-leur
        • Nederland

        • Datasheet
          Request / Contact
          used Milling machines Bed Type Milling Machine - Vertical Soraluce Soramill SL 5.000


          • Jansen Machinehandel BV
          • Bredaseweg 210
          • 4873 LA Etten-leur
          • Nederland

          • +31 (0) 76 5015750
          • info@jansenmachinehandel.nl
            www.jansenmachinehandel.nl
          #2049-F336 · Bed Type Milling Machine - Vertical

          Soraluce - Soramill SL 5.000 - - 1995 -

          Technical details
          CNC brand Heidenhain ︱CNC model TNC 415 B ︱Table length 5000 mm︱Table width 800 mm︱Maximum table load 12,5 T︱X 3500 mm︱Y 900 mm︱Z 1000 mm︱Spindle taper ISO 50 ︱Number of pallets 1 ︱Rapid traverse 12 m/min︱Speed 2000 RPM︱Indexing per 2,5 °︱Motor 22 kW︱Power 22 kVA︱Machine dimensions (lxwxh) 7250 x 3900 x 3200 mm︱Machine weight 16500 kg︱
          Portal bed milling machine Color display Coolant treatment CNC controlled milling head Chip conveyor Milling head is 100% overhauled
            CNC brand Heidenhain
            CNC model TNC 415 B
            Table length 5000 mm
            Table width 800 mm
            Maximum table load 12,5 T
            X 3500 mm
            Y 900 mm
            Z 1000 mm
            Spindle taper ISO 50
            Number of pallets 1
            Rapid traverse 12 m/min
            Speed 2000 RPM
            Indexing per 2,5 °
            Motor 22 kW
            Power 22 kVA
            Machine dimensions (lxwxh) 7250 x 3900 x 3200 mm
            Machine weight 16500 kg
            Description :
            Portal bed milling machine
            Color display
            Coolant treatment
            CNC controlled milling head
            Chip conveyor
            Milling head is 100% overhauled


        • Jansen Machinehandel BV
        • Bredaseweg 210
        • 4873 LA Etten-leur
        • Nederland

        • Datasheet
          Request / Contact
          used Milling machines Bed Type Milling Machine - Vertical RAMBAUDI Rammatic 804


          • EnTeHa GmbH & Co.KG
          • Im Wollenklingen 6
          • 69517 Gorxheimertal
          • Deutschland

          • +49 6201 2630 545
          • info@enteha.de
            www.enteha.de
          #2081-4378 · Bed Type Milling Machine - Vertical

          RAMBAUDI - Rammatic 804 - - 1992 - Heidenhain iTNC 530

          Technical details
          x-travel 1500 mm︱y-travel 815 mm︱z-travel 815 mm︱Control Heidenhain iTNC 530 ︱total power requirement 4 x 11 kW︱weight of the machine ca. 20 t︱dimensions of the machine ca. 8 x 4 x 4,5 m︱
          bed milling machine retrofit 2010 - good general conditionSpace requirement approx. 8 x 4 x 4.5 mWeight approx. 20 toMovie:https://www.youtube.com/watch?v=_NESVeaukAQ&t=15s Transport dimensions Basic machine approx. 6 LM x 3 x 3.50 mSwitch cabinet approx. 2.6 x 0.6 x 2.6 mHydraulics, various sheet metal parts and accessories approx. 4 LMPreis EXW 4 - milling heads / alternatively 1/2/3/4-fold applicablequill stroke 150 mmClamping table 3250 x 815 mm table load 5000 kgSpindle SK 50Speed range 40-3600 min-1 Workspace: 1500 x 815 x 815 Drive: 4 x 11 Control: Heidenhain iTNC 530
            x-travel 1500 mm
            y-travel 815 mm
            z-travel 815 mm
            Control Heidenhain iTNC 530
            total power requirement 4 x 11 kW
            weight of the machine ca. 20 t
            dimensions of the machine ca. 8 x 4 x 4,5 m
            Description :
            bed milling machine

            retrofit 2010 - good general conditionSpace requirement approx. 8 x 4 x 4.5 mWeight approx. 20 toMovie:https://www.youtube.com/watch?v=_NESVeaukAQ&t=15s Transport dimensions Basic machine approx. 6 LM x 3 x 3.50 mSwitch cabinet approx. 2.6 x 0.6 x 2.6 mHydraulics, various sheet metal parts and accessories approx. 4 LMPreis EXW
            4 - milling heads / alternatively 1/2/3/4-fold applicablequill stroke 150 mmClamping table 3250 x 815 mm table load 5000 kgSpindle SK 50Speed range 40-3600 min-1
            Workspace: 1500 x 815 x 815
            Drive: 4 x 11
            Control: Heidenhain iTNC 530


        • EnTeHa GmbH & Co.KG
        • Im Wollenklingen 6
        • 69517 Gorxheimertal
        • Deutschland

        • Datasheet
          Request / Contact
          used Milling machines Bed Type Milling Machine - Vertical RECKERMANN Beta 10 Kombi


          • desba TRADING
          • Im Hofgarten 6
          • 61130 Nidderau
          • Deutschland

          • +49 (0)6187 20 30 749
          • info@desba-trading.de
            www.desba-trading.de
          #2072-2134 · Bed Type Milling Machine - Vertical

          RECKERMANN - Beta 10 Kombi - - 1987 - Heidenhain TNC 155

          Technical details
          x-travel 1500 mm︱y-travel 600 mm︱z-travel 450 mm︱Control Heidenhain TNC 155 ︱total power requirement 28,4 kW︱weight of the machine ca. 5,5 t︱dimensions of the machine ca. m︱
            x-travel 1500 mm
            y-travel 600 mm
            z-travel 450 mm
            Control Heidenhain TNC 155
            total power requirement 28,4 kW
            weight of the machine ca. 5,5 t


        • desba TRADING
        • Im Hofgarten 6
        • 61130 Nidderau
        • Deutschland

        • Datasheet
          Request / Contact
          used Milling machines Bed Type Milling Machine - Vertical DROOP & REIN LFAS2000L30ke


          • Markus Hirsch GmbH
          • Hüttenstrasse 1
          • 46284 Dorsten
          • Deutschland

          • +49 2362 95035 12
            +49 2362 95035 10
          • liersch@hirsch-maschinen.de
            www.hirsch-maschinen.de
          #1077-03431 · Bed Type Milling Machine - Vertical

          DROOP & REIN - LFAS2000L30ke - - 1986 - Fidia

          Technical details
          x-travel 3300 mm︱y-travel 2200 mm︱z-travel 1300 mm︱w-axis 350 mm︱workpiece height 1700 mm︱milling spindle diameter 140 mm︱diameter of quill 230 mm︱milling head speed 40-2000 U/min︱transmission ratio 4 ︱table surface area 4260x2000 mm︱T-slot - distance 175 mm︱T-slot - width 28 mm︱number of T-slots 11 ︱workpiece weight 300000 kg︱milling spindle motor 30 kW︱Feed 5-3000 mm/min︱control Fidia ︱total power requirement kW︱weight of the machine ca. 80 t︱dimensions of the machine ca. m︱
            x-travel 3300 mm
            y-travel 2200 mm
            z-travel 1300 mm
            w-axis 350 mm
            workpiece height 1700 mm
            milling spindle diameter 140 mm
            diameter of quill 230 mm
            milling head speed 40-2000 U/min
            transmission ratio 4
            table surface area 4260x2000 mm
            T-slot - distance 175 mm
            T-slot - width 28 mm
            number of T-slots 11
            workpiece weight 300000 kg
            milling spindle motor 30 kW
            Feed 5-3000 mm/min
            control Fidia
            weight of the machine ca. 80 t


        • Markus Hirsch GmbH
        • Hüttenstrasse 1
        • 46284 Dorsten
        • Deutschland

        • Datasheet
          Request / Contact
          used Milling machines Bed Type Milling Machine - Vertical DROOP & REIN LFAS2000Kc


          • Markus Hirsch GmbH
          • Hüttenstrasse 1
          • 46284 Dorsten
          • Deutschland

          • +49 2362 95035 12
            +49 2362 95035 10
          • liersch@hirsch-maschinen.de
            www.hirsch-maschinen.de
          #1077-03247 · Bed Type Milling Machine - Vertical

          DROOP & REIN - LFAS2000Kc - - 1983 - Heindenhain

          Technical details
          x-travel 4000 mm︱y-travel 2000 mm︱z-travel 1300 mm︱Control Heindenhain ︱type TNC530i ︱table surface area 5200x2000 mm︱Table load 30000 kg︱pinole diameter 230 mm︱number of T-slots 11 ︱T-slot - width 28 mm︱T-slot - distance 175 mm︱spindle taper ISO 50 ︱turning speeds 40-2000 U/min︱spindle motor 30 kW︱transmission ratio 4 ︱total power requirement kW︱weight of the machine ca. 70 t︱dimensions of the machine ca. 10x5,5x5,8 m︱
          Maschine wurde überholt machine is retofit
            x-travel 4000 mm
            y-travel 2000 mm
            z-travel 1300 mm
            Control Heindenhain
            type TNC530i
            table surface area 5200x2000 mm
            Table load 30000 kg
            pinole diameter 230 mm
            number of T-slots 11
            T-slot - width 28 mm
            T-slot - distance 175 mm
            spindle taper ISO 50
            turning speeds 40-2000 U/min
            spindle motor 30 kW
            transmission ratio 4
            weight of the machine ca. 70 t
            dimensions of the machine ca. 10x5,5x5,8 m
            Description :
            Maschine wurde überholt
            machine is retofit


        • Markus Hirsch GmbH
        • Hüttenstrasse 1
        • 46284 Dorsten
        • Deutschland

        • Datasheet
          Request / Contact
          used Milling machines Bed Type Milling Machine - Vertical DROOP & REIN FS 130 gke


          • Markus Hirsch GmbH
          • Hüttenstrasse 1
          • 46284 Dorsten
          • Deutschland

          • +49 2362 95035 12
            +49 2362 95035 10
          • liersch@hirsch-maschinen.de
            www.hirsch-maschinen.de
          #1077-03244 · Bed Type Milling Machine - Vertical

          DROOP & REIN - FS 130 gke - - 1971 - Heidenhain

          Technical details
          x-travel 2000 mm︱y-travel 1000 mm︱z-travel 1000 mm︱Control Heidenhain ︱type TNC 430 ︱spindle turning speed range 15-1450 U/min︱Table area 2300x1200 mm︱Spindle 200 mm︱spindle stroke 200 mm︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱
          Nr 3762 Maschine wurde überholt machine is retofit
            x-travel 2000 mm
            y-travel 1000 mm
            z-travel 1000 mm
            Control Heidenhain
            type TNC 430
            spindle turning speed range 15-1450 U/min
            Table area 2300x1200 mm
            Spindle 200 mm
            spindle stroke 200 mm
            Description :
            Nr 3762
            Maschine wurde überholt
            machine is retofit


        • Markus Hirsch GmbH
        • Hüttenstrasse 1
        • 46284 Dorsten
        • Deutschland

        • Datasheet
          Request / Contact

          Milling Machine - Horizontal

          used Milling machines Milling Machine - Horizontal MIKRON HAAS VCE500


          • Hop Machines
          • Wethouder Lindersstraat 145
          • 5455 GK Wilbertoord
          • Niederlande

          • +31 (0)485478107
          • info@hopmachines.nl
            www.hopmachines.nl
          #2018-5615 · Milling Machine - Horizontal

          MIKRON HAAS - VCE500 - - 2000 -

          Technical details
          x-travel 500 mm︱y-travel 400 mm︱z-travel 400 mm︱working length X mm︱working length Y mm︱working depth Z mm︱Workpiece dimensions mm︱Workingpiece thickness from to mm︱Motor output kW︱Number of axles St.︱Number of milling agregates St.︱Number of heads vertical St.︱Number of heads horizontal St.︱Overall size mm︱Weight kg︱Year ︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱
            x-travel 500 mm
            y-travel 400 mm
            z-travel 400 mm


        • Hop Machines
        • Wethouder Lindersstraat 145
        • 5455 GK Wilbertoord
        • Niederlande

        • Datasheet
          Request / Contact
          used Milling machines Milling Machine - Horizontal MIKRON WF 21 D


          • Christoph Busch GmbH
          • Dieselstr. 22
          • 41352 Korschenbroich
          • Deutschland

          • +49 (0) 2182 570 5930
            +49 (0) 2182 5785202
          • mail@busch-gruppe.de
            www.busch-gruppe.de
          #2052-06409 · Milling Machine - Horizontal

          MIKRON - WF 21 D - - 1990 - Heidenhain 355

          Technical details
          x-travel 450 mm︱y-travel 400 mm︱z-travel 400 mm︱ ︱control Heidenhain 355 ︱cooling ︱total power requirement 4 kW︱weight of the machine ca. 2,4 t︱dimensions of the machine ca. m︱
            x-travel 450 mm
            y-travel 400 mm
            z-travel 400 mm
            control Heidenhain 355
            total power requirement 4 kW
            weight of the machine ca. 2,4 t


        • Christoph Busch GmbH
        • Dieselstr. 22
        • 41352 Korschenbroich
        • Deutschland

        • Datasheet
          Request / Contact
          used Milling machines Milling Machine - Horizontal DECKEL DC40-2


          • MW-MACHINES
          • Dorf 9
          • 4133 Hofkirchen
          • Österreich

          • +43 (0)66718068977
            -
          • info@machines-mw.at
            machines-mw.at
          #2077-30002 · Milling Machine - Horizontal

          DECKEL - DC40-2 - - 1988 -

          Technical details
          x-travel 635 mm︱y-travel 500 mm︱z-travel 630 mm︱b-axis 360 °︱rapid traverse 15 m/min︱spindle turning speed - stepless bis 4000 U/min︱spindle drive 18,7 kW︱toolpiece magazine: chain magazine 108 Stück︱tool diameter 125 mm︱wotkpiece diameter with 2 vacant positions 175 mm︱workpiece length 400 mm︱weight of tools max. 10 (15) kg︱table-size 500 x 630 mm︱weight of the machine ca. 9,5 t︱dimensions of the machine ca. m︱
            x-travel 635 mm
            y-travel 500 mm
            z-travel 630 mm
            b-axis 360 °
            rapid traverse 15 m/min
            spindle turning speed - stepless bis 4000 U/min
            spindle drive 18,7 kW
            toolpiece magazine: chain magazi. 108 Stück
            tool diameter 125 mm
            wotkpiece diameter with 2 vacant. 175 mm
            workpiece length 400 mm
            weight of tools max. 10 (15) kg
            table-size 500 x 630 mm
            weight of the machine ca. 9,5 t


        • MW-MACHINES
        • Dorf 9
        • 4133 Hofkirchen
        • Österreich

        • Datasheet
          Request / Contact
          used Milling machines Milling Machine - Horizontal Deckel FP5NC


          • Jansen Machinehandel BV
          • Bredaseweg 210
          • 4873 LA Etten-leur
          • Nederland

          • +31 (0) 76 5015750
          • info@jansenmachinehandel.nl
            www.jansenmachinehandel.nl
          #2049-F414 · Milling Machine - Horizontal

          Deckel - FP5NC - - 1986 -

          Technical details
          Control Dialog 4 ︱Table length 1000 mm︱Table width 500 mm︱Spindle taper ISO 40
            Control Dialog 4
            Table length 1000 mm
            Table width 500 mm
            Spindle taper ISO 40
            Description :



        • Jansen Machinehandel BV
        • Bredaseweg 210
        • 4873 LA Etten-leur
        • Nederland

        • Datasheet
          Request / Contact
          used Milling machines Milling Machine - Horizontal WEILER FHP 750


          • MW-MACHINES
          • Dorf 9
          • 4133 Hofkirchen
          • Österreich

          • +43 (0)66718068977
            -
          • info@machines-mw.at
            machines-mw.at
          #2077-30009 · Milling Machine - Horizontal

          WEILER - FHP 750 - - 1983 -

          Technical details
          x-travel 550 mm︱y-travel 180 mm︱z-travel 400 mm︱table-size 750 x 200 mm︱feed range - horizontal 15 - 750 mm/min︱feed range - vertical 5 - 250 mm/min︱rapid traverse 5,5 m/min︱arbor support 350 mm︱total power requirement kW︱weight of the machine ca. 1,35 t︱dimensions of the machine ca. 2 x 1,45 x 1,9 m︱
            x-travel 550 mm
            y-travel 180 mm
            z-travel 400 mm
            table-size 750 x 200 mm
            feed range - horizontal 15 - 750 mm/min
            feed range - vertical 5 - 250 mm/min
            rapid traverse 5,5 m/min
            arbor support 350 mm
            weight of the machine ca. 1,35 t
            dimensions of the machine ca. 2 x 1,45 x 1,9 m


        • MW-MACHINES
        • Dorf 9
        • 4133 Hofkirchen
        • Österreich

        • Datasheet
          Request / Contact
          used Milling machines Milling Machine - Horizontal SUNDSTRAND RIGIDE MILL N°33


          • FIMOTEC
          • 20 RUE AMPERE
          • 67500 HAGUENAU
          • Frankreich

          • +33 (0)388720247
            +33 (0)388936066
          • FIMOTEC@WANADOO.FR
            WWW.FIMOTEC.FR
          #1105-01103 · Milling Machine - Horizontal

          SUNDSTRAND - RIGIDE MILL N°33 - - 1970 -

          Technical details
          x-travel 1250 mm︱y-travel 500 mm︱z-travel 500 mm︱table-size 1800x320 mm︱total power requirement kW︱weight of the machine ca. 5 t︱dimensions of the machine ca. m︱
          horizontal for platt milling
            x-travel 1250 mm
            y-travel 500 mm
            z-travel 500 mm
            table-size 1800x320 mm
            weight of the machine ca. 5 t
            Description :
            horizontal for platt milling


        • FIMOTEC
        • 20 RUE AMPERE
        • 67500 HAGUENAU
        • Frankreich

        • Datasheet
          Request / Contact
          used Milling machines Milling Machine - Horizontal STEINEL SH5


          • MW-MACHINES
          • Dorf 9
          • 4133 Hofkirchen
          • Österreich

          • +43 (0)66718068977
            -
          • info@machines-mw.at
            machines-mw.at
          #2077-30003 · Milling Machine - Horizontal

          STEINEL - SH5 - - -

          Technical details
          x-travel / mm︱y-travel / mm︱z-travel / mm︱table surface area 700 x 200 mm︱total power requirement kW︱weight of the machine ca. 0,7 t︱dimensions of the machine ca. m︱
            x-travel / mm
            y-travel / mm
            z-travel / mm
            table surface area 700 x 200 mm
            weight of the machine ca. 0,7 t


        • MW-MACHINES
        • Dorf 9
        • 4133 Hofkirchen
        • Österreich

        • Datasheet
          Request / Contact

          milling machining centers - horizontal

          used Milling machines milling machining centers - horizontal GROB 520 G


          • IVW GMBH
          • Niederrheinstr.298
          • 40489 Düsseldorf
          • Deutschland

          • (0049)211-4184428
            (0049)211-4184430
          • cd@ivwgmbh.com
            www.ivwgmbh.com
          #1088-E00983 · milling machining centers - horizontal

          GROB - 520 G - - 2014 - 840 D

          Technical details
          x-travel 750 mm︱y-travel 1000 mm︱z-travel 870 mm︱Control 840 D ︱total power requirement 29 kW︱weight of the machine ca. 22,5 t︱dimensions of the machine ca. B 3,2 x L 6 x H 3.3 m︱
            x-travel 750 mm
            y-travel 1000 mm
            z-travel 870 mm
            Control 840 D
            total power requirement 29 kW
            weight of the machine ca. 22,5 t
            dimensions of the machine ca. B 3,2 x L 6 x H 3.3 m


        • IVW GMBH
        • Niederrheinstr.298
        • 40489 Düsseldorf
        • Deutschland

        • Datasheet
          Request / Contact
          used Milling machines milling machining centers - horizontal DMG Mori Seiki DMU 50 Ecoline


          • Jansen Machinehandel BV
          • Bredaseweg 210
          • 4873 LA Etten-leur
          • Nederland

          • +31 (0) 76 5015750
          • info@jansenmachinehandel.nl
            www.jansenmachinehandel.nl
          #2049-F652 · milling machining centers - horizontal

          DMG Mori Seiki - DMU 50 Ecoline - - 2012 -

          Technical details
          CNC brand Siemens ︱CNC model 840D ︱Table width 500 mm︱X 500 mm︱Y 450 mm︱Z 400 mm︱Maximum speed 10.000 RPM︱table load 200 kg︱spindle taper SK40
          Brand DMG Mori Seiki Machine no F652 Type DMU 50 Ecoline Control Siemens 840D Year of make 2012 Table width 500 mm Table diameter 630 mm ø Table adjustable in degrees X 500 mm Y 450 mm Z 400 mm Spindle taper SK40 Speed minimum 20 RPM Speed maximum 10.000 RPM Maximum table load 200 kg Chip transport Machine size 3.400 x 2.500 x 2.200 mm Machine weight 4.700 kg Tool magazine positions: 30 B-as: -5/+110 ° C-as: 360 ° Engine power: 13/9 Kw
            CNC brand Siemens
            CNC model 840D
            Table width 500 mm
            X 500 mm
            Y 450 mm
            Z 400 mm
            Maximum speed 10.000 RPM
            table load 200 kg
            spindle taper SK40
            Description :
            Brand DMG Mori Seiki
            Machine no F652
            Type DMU 50 Ecoline
            Control Siemens 840D
            Year of make 2012
            Table width 500 mm
            Table diameter 630 mm ø
            Table adjustable in degrees
            X 500 mm
            Y 450 mm
            Z 400 mm
            Spindle taper SK40
            Speed minimum 20 RPM
            Speed maximum 10.000 RPM
            Maximum table load 200 kg
            Chip transport
            Machine size 3.400 x 2.500 x 2.200 mm
            Machine weight 4.700 kg

            Tool magazine positions: 30
            B-as: -5/+110 °
            C-as: 360 °
            Engine power: 13/9 Kw


        • Jansen Machinehandel BV
        • Bredaseweg 210
        • 4873 LA Etten-leur
        • Nederland

        • Datasheet
          Request / Contact
          used Milling machines milling machining centers - horizontal Tos SPEEDtec


          • Jansen Machinehandel BV
          • Bredaseweg 210
          • 4873 LA Etten-leur
          • Nederland

          • +31 (0) 76 5015750
          • info@jansenmachinehandel.nl
            www.jansenmachinehandel.nl
          #2049-F641 · milling machining centers - horizontal

          Tos - SPEEDtec - - 2009 -

          Technical details
          CNC brand Siemens ︱CNC model Sinumerik 840D ︱Table length 4x 1.000 mm︱Table width 3x 1.000 / 1x 1.250 mm︱X 1.250 mm︱Y 1.000 mm︱Z 600 mm︱Maximum speed 12.000 RPM︱table load 4.000 kg︱spindle taper HSK 100
          Brand Tos Machine no F641 Type SPEEDtec CNC Brand Siemens CNC Type Sinumerik 840D Year of make 2009 X 1.250 mm Y 1.000 mm Z 600 mm Intake HSK 100 Engine power 25 kW Speed 12000 RPM Tool changer Number of pallets 4 Outgoing ram Including manuals Speed maximum 12.000 RPM Maximum pallet load 4.000 kg Chip transport Tool magazine positions: 2x 40 , HSK 100 4 tables, 1x 1.000 x 1.250mm / 3x 1.000 x 1.000mm
            CNC brand Siemens
            CNC model Sinumerik 840D
            Table length 4x 1.000 mm
            Table width 3x 1.000 / 1x 1.250 mm
            X 1.250 mm
            Y 1.000 mm
            Z 600 mm
            Maximum speed 12.000 RPM
            table load 4.000 kg
            spindle taper HSK 100
            Description :
            Brand Tos
            Machine no F641
            Type SPEEDtec
            CNC Brand Siemens
            CNC Type Sinumerik 840D
            Year of make 2009
            X 1.250 mm
            Y 1.000 mm
            Z 600 mm
            Intake HSK 100
            Engine power 25 kW
            Speed 12000 RPM
            Tool changer
            Number of pallets 4
            Outgoing ram
            Including manuals
            Speed maximum 12.000 RPM
            Maximum pallet load 4.000 kg
            Chip transport

            Tool magazine positions: 2x 40 , HSK 100
            4 tables, 1x 1.000 x 1.250mm / 3x 1.000 x 1.000mm


        • Jansen Machinehandel BV
        • Bredaseweg 210
        • 4873 LA Etten-leur
        • Nederland

        • Datasheet
          Request / Contact
          used Milling machines milling machining centers - horizontal MORI SEIKI NH8000 DCG


          • STEINHAND GmbH
          • Am Stahlwerk 15
          • 45527 Hattingen
          • Deutschland

          • +49 (0) 2324 / 977 26 - 01
            +49 (0) 2324 / 977 26 - 99
          • info@steinhand.de
            www.steinhand.de
          #2026-1634 · milling machining centers - horizontal

          MORI SEIKI - NH8000 DCG - - 2008 - FANUC - MSX-701III

          Technical details
          travel -x axis 1.400 mm︱travel -y axis 1.200 mm︱travel -z axis 1.350 mm︱control FANUC - MSX-701III ︱numbers of positions in the tool changer 60 ︱tool taper HSK 100 ︱max. Spindle speed 8.000 U/min.︱max. tool length 800 mm︱max. tool weight 30 kg︱
          Milling machining centers - horizontal | MORI SEIKI - NH8000 DCG equipped with additional 4th axis. Equipment: - B-axis (rotary table): 360,000 X 0.0001, - 2-fold pallet changing system, - Pallet dimensions 800 mm x 800 mm, The machine is in a well-maintained condition with approx. 30.000 (h) Power-On hours. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: MORI-SEIKI | NH 8000 | NH8000DCG | NH-8000
            travel -x axis 1.400 mm
            travel -y axis 1.200 mm
            travel -z axis 1.350 mm
            control FANUC - MSX-701III
            numbers of positions in the tool. 60
            tool taper HSK 100
            max. Spindle speed 8.000 U/min.
            max. tool length 800 mm
            max. tool weight 30 kg
            Description :
            Milling machining centers - horizontal | MORI SEIKI - NH8000 DCG
            equipped with additional 4th axis.


            Equipment:
            - B-axis (rotary table): 360,000 X 0.0001,
            - 2-fold pallet changing system,
            - Pallet dimensions 800 mm x 800 mm,


            The machine is in a well-maintained condition
            with approx. 30.000 (h) Power-On hours.

            - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
            #Tags: MORI-SEIKI | NH 8000 | NH8000DCG | NH-8000


        • STEINHAND GmbH
        • Am Stahlwerk 15
        • 45527 Hattingen
        • Deutschland

        • Datasheet
          Request / Contact
          used Milling machines milling machining centers - horizontal HECKERT HEC 500D XXL


          • Gustav Schönberger GmbH
          • Hünderstr. 14
          • 74080 Heilbronn
          • Deutschland

          • (0049)7131 46060
            (0049)7131 460620
          • schoenberger@gsh-maschinen.de
            www.gsh-maschinen.de
          #1036-053742 · milling machining centers - horizontal

          HECKERT - HEC 500D XXL - - 2007 -

          Technical details
          x-travel 750 mm︱y-travel 750 mm︱z-travel 725 mm︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱
          CNC control Sinumerik 840D NC-rotary table B-axis automatic tool changer for 320 tools pallet changing device, 2 pallets 500 mm x 500mm coolant through spindle device IKZ (80 bar) chip conveyor coolant device Technische Daten / technical details: X-Weg längs / X-travel longitudinal 750 mm Y-Weg senkrecht / Y-travel vertical 750 mm Z-Weg quer / Z-travel cross 725 mm B-Achse / B-axis 360 ° Spindelaufnahme / spindle taper HSK 63A Drehzahlbereich Spindel / spindle speed 50-10000 Upm /rpm Werkzeugplätze / tool places in changer 320 Vorschub / infeed 60000 mm/min Eilgang / rapid feed 60 m/min Antriebsleistung Spindel 40/100% ED / drive capacity spindle 40/100%ED 37/24 kW Gewicht der Maschine ca. / weight ca. 15000 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding.
            x-travel 750 mm
            y-travel 750 mm
            z-travel 725 mm
            Description :
            CNC control Sinumerik 840D
            NC-rotary table B-axis
            automatic tool changer for 320 tools
            pallet changing device, 2 pallets 500 mm x 500mm
            coolant through spindle device IKZ (80 bar)
            chip conveyor
            coolant device

            Technische Daten / technical details:
            X-Weg längs / X-travel longitudinal 750 mm
            Y-Weg senkrecht / Y-travel vertical 750 mm
            Z-Weg quer / Z-travel cross 725 mm
            B-Achse / B-axis 360 °
            Spindelaufnahme / spindle taper HSK 63A
            Drehzahlbereich Spindel / spindle speed 50-10000 Upm /rpm
            Werkzeugplätze / tool places in changer 320
            Vorschub / infeed 60000 mm/min
            Eilgang / rapid feed 60 m/min
            Antriebsleistung Spindel 40/100% ED / drive capacity spindle 40/100%ED 37/24
            kW
            Gewicht der Maschine ca. / weight ca. 15000 kg
            Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich -
            Technical data, accessories and description of the machine are not binding.



        • Gustav Schönberger GmbH
        • Hünderstr. 14
        • 74080 Heilbronn
        • Deutschland

        • Datasheet
          Request / Contact
          used Milling machines milling machining centers - horizontal TOYODA FH630SX


          • STEINHAND GmbH
          • Am Stahlwerk 15
          • 45527 Hattingen
          • Deutschland

          • +49 (0) 2324 / 977 26 - 01
            +49 (0) 2324 / 977 26 - 99
          • info@steinhand.de
            www.steinhand.de
          #2026-1659 · milling machining centers - horizontal

          TOYODA - FH630SX - - 2007 - FANUC31iMA

          Technical details
          number of spindle speeds 6.000 U/min︱tool taper BT50 ︱numbers of positions in the tool changer 121 ︱control FANUC31iMA
          Milling machining centers - horizontal | TOYODA - FH630SX equipped with ITC and chip conveyor. Additional equipment: + Full NC table 360.000 * 0,001 deg The machine is in a well-maintained condition and can be inspected at any time under power. Technical data of the machine will follow soon. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: FH 630SX | FH630 | FH-630 | FH 630 SX
            number of spindle speeds 6.000 U/min
            tool taper BT50
            numbers of positions in the tool. 121
            control FANUC31iMA
            Description :
            Milling machining centers - horizontal | TOYODA - FH630SX
            equipped with ITC and chip conveyor.


            Additional equipment:
            + Full NC table 360.000 * 0,001 deg


            The machine is in a well-maintained condition and
            can be inspected at any time under power.

            Technical data of the machine will follow soon.

            - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
            #Tags: FH 630SX | FH630 | FH-630 | FH 630 SX


        • STEINHAND GmbH
        • Am Stahlwerk 15
        • 45527 Hattingen
        • Deutschland

        • Datasheet
          Request / Contact
          used Milling machines milling machining centers - horizontal DECKEL-MAHO (DMG) DMC 80 H Linear - RS 4


          • Knops Werkzeugmaschinen
          • Konrad-Zuse-Straße 5
          • 40789 Monheim
          • Deutschland

          • 02173 - 39494-0
            02173 - 39494-29
          • maschinen@knops.de
            www.knops.de
          #1022-E05939 · milling machining centers - horizontal

          DECKEL-MAHO (DMG) - DMC 80 H Linear - RS 4 - - 2006 - SIEMENS 840 D

          Technical details
          x-travel 800 mm︱y-travel 800 mm︱z-travel 1050 mm︱Control SIEMENS 840 D ︱size of pallet 630 x 630 mm︱tool taper HSK 63 A ︱spindle turning speed range 24000 U/min︱main drive motor 35/25 (40/100% ED) kW︱total power requirement kW︱weight of the machine ca. 29,4 t︱dimensions of the machine ca. m︱
            x-travel 800 mm
            y-travel 800 mm
            z-travel 1050 mm
            Control SIEMENS 840 D
            size of pallet 630 x 630 mm
            tool taper HSK 63 A
            spindle turning speed range 24000 U/min
            main drive motor 35/25 (40/100% ED) kW
            weight of the machine ca. 29,4 t


        • Knops Werkzeugmaschinen
        • Konrad-Zuse-Straße 5
        • 40789 Monheim
        • Deutschland

        • Datasheet
          Request / Contact
          •   
          •   
          • 1  
          • 2  
          •   
          •