Reboring Machine
Machinelist: Reboring Machine
Reboring Machine
- Feyen Maschinen GmbH
- Gelleperstr. 10
- 47809 Krefeld
- Deutschland
-
0049 (0)2151/5267-0
0049 (0)2151/5267-39 -
info@feyen.de
www.feyen.de
#1053-003066 · Reboring Machine
ASDORF - TLB 130 - - 1987 -
Technical details
transportable drilling out work, completely ready for connection gear of drill spindle runs over LENZE planetary drive advanced feed with LENZE direct current motor, output: 160 watt clockwise and counterclockwise with tool holder for Ø 420 x 620 mm, tool holder for tooling equipment fabri. LENZ LPAS 3, diverse turning steel
- Feyen Maschinen GmbH
- Gelleperstr. 10
- 47809 Krefeld
- Deutschland
-
0049 (0)2151/5267-0
0049 (0)2151/5267-39 -
info@feyen.de
www.feyen.de
#1053-003065 · Reboring Machine
ASDORF - TLB 100 - - 1987 -
Technical details
Transportable boring mill, completely ready for connection, Drilling spindle drive via LENZE planetary gear, feed drive with LENZE DC motor, power 100 watts, left and right rotation, with tool holder for Ø 420 and Ø 550 mm, tool holder for facing tool, make LENZ LPAS 3, various turning steels,
Table Type Boring and Milling Machine
- Harry Vraets Machinery B.V.
- Gezellenstraat 2
- 3861RD Nijkerk
- Niederlande
-
+31 (0)332452145
-
info@vraetsmachinery.com
www.vraetsmachinery.com
#2039-12669A · Table Type Boring and Milling Machine
TOSHIBA - BTD-110R16 - - unbekannt - TOSNUC 7-3
Technical details
- Markus Hirsch GmbH
- Hüttenstrasse 1
- 46284 Dorsten
- Deutschland
-
+49 2362 95035 12
+49 2362 95035 10 -
liersch@hirsch-maschinen.de
www.hirsch-maschinen.de
#1077-V00154 · Table Type Boring and Milling Machine
TOS - WH 10 NC - - unbekannt - Heidenhain TNC 135
Technical details
- Kraft Werkzeugmaschinen GmbH
- Wilhelmstraße 20
- 64589 Stockstadt
- Deutschland
-
+49 (0) 6158/9999975
-
nr@kraft-werkzeugmaschinen.de
www.kraft-werkzeugmaschinen.de
#4019-100319 · Table Type Boring and Milling Machine
KRAFT (SMTCL) - K-IMI - - Fabrikneu - Siemens/Fanuc/Heidenhain
Technical details
Datasheet
Request / Contact
- Kraft Werkzeugmaschinen GmbH
- Wilhelmstraße 20
- 64589 Stockstadt
- Deutschland
-
+49 (0) 6158/9999975
-
nr@kraft-werkzeugmaschinen.de
www.kraft-werkzeugmaschinen.de
#4019-94300 · Table Type Boring and Milling Machine
KRAFT - HBM-110 | HBM-110L | HBM-110XL - - Fabrikneu - oder CNC
Technical details
Datasheet
Request / Contact
- Kraft Werkzeugmaschinen GmbH
- Wilhelmstraße 20
- 64589 Stockstadt
- Deutschland
-
+49 (0) 6158/9999975
-
nr@kraft-werkzeugmaschinen.de
www.kraft-werkzeugmaschinen.de
#4019-91280 · Table Type Boring and Milling Machine
KRAFT - WHM-110 - - Fabrikneu -
Technical details
Datasheet
Request / Contact
- Kraft Werkzeugmaschinen GmbH
- Wilhelmstraße 20
- 64589 Stockstadt
- Deutschland
-
+49 (0) 6158/9999975
-
nr@kraft-werkzeugmaschinen.de
www.kraft-werkzeugmaschinen.de
#4019-94305 · Table Type Boring and Milling Machine
KRAFT - HBM-130 | HBM-130L | HBM-130XL - - Fabrikneu - oder CNC
Technical details
Technical Offer of HBM-130 ? Powerful servo spindle motor and four spindle speed rang, stepless in each range. much lower maintenance and 80% failure rate reduced ? High rigidity spindle could insure the strong machining ? Worktable 4x90° position by the collimator ? X,Y, Z, B axes DRO are available ? Spindle could choose ISO50, with automatic clamping 1. Introduce The horizontal boring and milling machine series HBM-130 of our company is suitable for such operation as drilling, counter-boring, boring, reaming, spot-facing, tapping and milling etc. Also the horizontal boring and milling machine type is equipped with fixed facing head on which radial facing slide can be radically feed consequently to enable the machine to undertake boring of large-diameter hole, external cutting ,end face turning and recessing, etc. The machine is composed of bed, front column, headstock, cross and longitudinal saddle, worktable, back column and balance weight pulley etc. The vertical movement of headstock goes along the column's guideway, the worktable can move transversely and longitudinally on the bed, and the worktable can be rotated. The characteristics of HBM-130 2.1 The big servo spindle 22KW motor supply continuously speed change and high torque output of headstock. Four speed range can be changed by the selector on the control panel. The infinit speed change in each range can be effected continuously and smoothly. It’s very simple and convenient for machine operation. Compare with old headstock structure, 24 steps speed changing by hydraulic, the failure rate will be reduced 80%. 2.2 The vertical coordinate ( headstock lifting direction ) and cross coordinate ( worktable transverse movement ) and longitudinal coordinate ( worktable longitudinal movement--option ) are provided with new type digital read out unit with memory function, which makes the machine with complete function and high accuracy. 2.3 Main parts of the machine such as bed, front column and guideways of longitudinal saddle are all hardened and ground, which bring high stiffness of the guideways and extend the using life of the machine. 2.4 The horizontal guideway surface of the machine is provided with all pull-board type dust-proof. 2.5 Electric-hydraulic interlocking device will be fixed between the moving units and when a moving unit is working, the other moving units will be clamped automatically (except spindle, radial facing slide). 2.6 In the rapid traverse gearbox, safety clutches are installed to prevent the machine from overload. 3. Transmission systems of the machine 3.1 Headstock transmission The rotation movement of boring spindle are driven by CTB servo spindle motor directly. Insteady of old design, 24 steps spindle speed, the spindle servo motor supply two range speed. Low spindle speed with big torque output and high spindle speed with stable and continuously cutting forece. 3.2 Feed motion The feed motion of all moving units of this machine is feeding per spindle revolution (e.g. traverse rate of spindle, headstock, table per spindle revolution).The power of various moving units comes from shaft driven by main driven motor. It can be transmitted through gears of speed-change device to shaft (the feed safety mechanism). After that the motion will be transmitted further through the forward and reverse mechanism, to the feed shaft, then to the lead-screw or gear racks of various moving units, enable the headstock, cross & longitudinal saddles to obtain each 18 steps feed rates at low and high gear respectively. The feed motion of the radial slide on the facing head comes from headstock, enable it to obtain various feed rates. 3.3 Rapid transmission system The rapid moving of the headstock,cross & longitudinal saddles of the machine and the rapid rotation of the rotary worktable are driven by AC motor mounted at the right side of the bed. Power from the motor is transmitted from shafts coupling and friction clutch to each moving units respectively, enable the spindle, headstock and cross & longitudinal saddles to obtain the rapid moving speed 2500mm/min, the rapid rotation of the worktable is 1r/min. 4. Hydraulic system of the machine The hydraulic system is located inside of longitudinal saddle of the machine, which is used for the transverse of headstock, longitudinal & cross movement, rotation of worktable, feed speed change and internal lubrication of headstock
Datasheet
Request / Contact
- Kraft Werkzeugmaschinen GmbH
- Wilhelmstraße 20
- 64589 Stockstadt
- Deutschland
-
+49 (0) 6158/9999975
-
nr@kraft-werkzeugmaschinen.de
www.kraft-werkzeugmaschinen.de
#4019-100417 · Table Type Boring and Milling Machine
KRAFT - HBM-130 XL - - 2022 - konventionell
Technical details
Technical Offer of HBM-130 ? Powerful servo spindle motor and four spindle speed rang, stepless in each range. much lower maintenance and 80% failure rate reduced ? High rigidity spindle could insure the strong machining ? Worktable 4x90° position by the collimator ? X,Y, Z, B axes DRO are available ? Spindle could choose ISO50, with automatic clamping 1. Introduce The horizontal boring and milling machine series HBM-130 of our company is suitable for such operation as drilling, counter-boring, boring, reaming, spot-facing, tapping and milling etc. Also the horizontal boring and milling machine type is equipped with fixed facing head on which radial facing slide can be radically feed consequently to enable the machine to undertake boring of large-diameter hole, external cutting ,end face turning and recessing, etc. The machine is composed of bed, front column, headstock, cross and longitudinal saddle, worktable, back column and balance weight pulley etc. The vertical movement of headstock goes along the column's guideway, the worktable can move transversely and longitudinally on the bed, and the worktable can be rotated. The characteristics of HBM-130 2.1 The big servo spindle 22KW motor supply continuously speed change and high torque output of headstock. Four speed range can be changed by the selector on the control panel. The infinit speed change in each range can be effected continuously and smoothly. It’s very simple and convenient for machine operation. Compare with old headstock structure, 24 steps speed changing by hydraulic, the failure rate will be reduced 80%. 2.2 The vertical coordinate ( headstock lifting direction ) and cross coordinate ( worktable transverse movement ) and longitudinal coordinate ( worktable longitudinal movement--option ) are provided with new type digital read out unit with memory function, which makes the machine with complete function and high accuracy. 2.3 Main parts of the machine such as bed, front column and guideways of longitudinal saddle are all hardened and ground, which bring high stiffness of the guideways and extend the using life of the machine. 2.4 The horizontal guideway surface of the machine is provided with all pull-board type dust-proof. 2.5 Electric-hydraulic interlocking device will be fixed between the moving units and when a moving unit is working, the other moving units will be clamped automatically (except spindle, radial facing slide). 2.6 In the rapid traverse gearbox, safety clutches are installed to prevent the machine from overload. 3. Transmission systems of the machine 3.1 Headstock transmission The rotation movement of boring spindle are driven by CTB servo spindle motor directly. Insteady of old design, 24 steps spindle speed, the spindle servo motor supply two range speed. Low spindle speed with big torque output and high spindle speed with stable and continuously cutting forece. 3.2 Feed motion The feed motion of all moving units of this machine is feeding per spindle revolution (e.g. traverse rate of spindle, headstock, table per spindle revolution).The power of various moving units comes from shaft driven by main driven motor. It can be transmitted through gears of speed-change device to shaft (the feed safety mechanism). After that the motion will be transmitted further through the forward and reverse mechanism, to the feed shaft, then to the lead-screw or gear racks of various moving units, enable the headstock, cross & longitudinal saddles to obtain each 18 steps feed rates at low and high gear respectively. The feed motion of the radial slide on the facing head comes from headstock, enable it to obtain various feed rates. 3.3 Rapid transmission system The rapid moving of the headstock,cross & longitudinal saddles of the machine and the rapid rotation of the rotary worktable are driven by AC motor mounted at the right side of the bed. Power from the motor is transmitted from shafts coupling and friction clutch to each moving units respectively, enable the spindle, headstock and cross & longitudinal saddles to obtain the rapid moving speed 2500mm/min, the rapid rotation of the worktable is 1r/min. 4. Hydraulic system of the machine The hydraulic system is located inside of longitudinal saddle of the machine, which is used for the transverse of headstock, longitudinal & cross movement, rotation of worktable, feed speed change and internal lubrication of headstock
Datasheet
Request / Contact
- Kraft Werkzeugmaschinen GmbH
- Wilhelmstraße 20
- 64589 Stockstadt
- Deutschland
-
+49 (0) 6158/9999975
-
nr@kraft-werkzeugmaschinen.de
www.kraft-werkzeugmaschinen.de
#4019-100416 · Table Type Boring and Milling Machine
KRAFT - HBM-110 - - 2020 - konventionell
Technical details
Datasheet
Request / Contact
- Leyendecker & Hollmann GmbH
- Giesenheide 18
- 40724 Hilden
- Deutschland
-
+49 (2103) 28097-0
+49 (2103) 28097-99 -
info@LHmachine.com
www.LHmachine.com
#1083-03282 · Table Type Boring and Milling Machine
PAMA - Speedmat 2 160 - - 2012 - Siemens 840 D
Technical details
Machine bed Z axis: Travel 3200 mm Feed rapid traverse 30,000 mm/min Feed rate 0.5/10000 mm/min Stand Y-axis: Travel 2500 mm Feed rapid traverse 30,000 mm/min Feed rate 0.5/10000 mm/min Head: -Work spindle diameter 160 mm -Tool holder A100 HSK W axis: -Feed rapid traverse 30,000 mm/min -Feed rate 0.5/10000 mm/min -Nominal torque of the drive 27 Nm Spindle: -Max. spindle speed 3500 rpm -Axial travel of the work spindle 800 mm -Nominal torque of the spindle drive 2396 Nm -Power spindle drive 52 kW Table X axis: -travel distance 3000 mm -Feed rapid traverse 30,000 mm/min -Feed rate 0.5/10000 mm/min Table B axis: -Table rotation 360° -Speed 5 rpm -Feed rate 0.005/5 mm/min Palette: -table size 1600x1600 mm -Load capacity 12000 kg Rack type tool magazine: -Maximum capacity tool magazine 306 -Distance between tool places 110 mm -Maximum tool diameter 105 mm Automatic head magazine - 2 positions Automatic universal head TS 20 360 S164: -Tool holder A 100 HSK -Spindle diameter 128.57 mm -Maximum spindle speed 2500 rpm -Indexing 360 positions/ 1° - Spindle support - Documentation
- Matthias Ehlers Werkzeugmaschinen
- Nikolaus-Otto-Straße 19 + 21
- 22946 Trittau
- Deutschland
-
+49 (0)4154 - 986 99 12
+49 (0)4154 - 986 99 14 -
anfrage@ehlers-wzm.de
www.ehlers-wzm.de
#2033-2024019 · Table Type Boring and Milling Machine
HYUNDAI - WIA KBN-135 - - 2011 - Fanuc 31i Model A
Technical details
In our opinion, the machine is in very good condition Used condition and can be viewed under power by appointment become. Accesories: - Special angle milling head, built in 2015 - IKZ, 15 bar - Tool breakage control, Renishaw TS 27 R - Transformer - chip conveyor ***Accessories, tools and clamping devices shown are only included in the scope of delivery if this is noted in the additional information.*** ***Changes and errors in the technical data and information as well Subject to prior sale!***
Datasheet
Request / Contact
- Kemmerich Werkzeugmaschinen
- Im Rottfeld 1a
- 40789 Monheim am Rhein
- Deutschland
-
+49 2173 207474
+49 2173 207473 -
info@kemmerich.biz
www.kemmerich.biz
#1020-20176 · Table Type Boring and Milling Machine
HNK MACHINE TOOL CO - HB 130 - - 2009 - Fanuc 18 LMB
Technical details
equipped with - CNC control Fanuc 18 LMB - ATC 60-fold - external coolant system - rotary table 1600 x 1800mm - telescopic covers - chip conveyor
Datasheet
Request / Contact
- Markus Hirsch GmbH
- Hüttenstrasse 1
- 46284 Dorsten
- Deutschland
-
+49 2362 95035 12
+49 2362 95035 10 -
liersch@hirsch-maschinen.de
www.hirsch-maschinen.de
#1077-03752 · Table Type Boring and Milling Machine
WM WORKS - WMG BMT 105 PTP - - 2001 -
Technical details
The techn. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively.About usMore than 400 of our own machines in the warehouseMore than 12,000 m² of storage space, crane capacity 70 tMore than 1000 items Accessories for your workshopYou want to sell machines, production lines or your company,then contact us.
- AS Maschinenhandel
- Welserstr. 10e
- 51149 Köln
- Deutschland
-
+49 (0)22031864856
+49 (0)22031864857 -
mail@asmaschinenhandel.de
www.asmaschinenhandel.de
#2044-100121 · Table Type Boring and Milling Machine
TOS - WHQ - - 2000 - TNC 430 Heidenhain
Technical details
- HESSE+CO Maschinenfabrik GesmbH
- Straße 4 Objekt 8
- 2351 Wiener Neudorf
- Österreich
-
+43/2236/638 70-0
+43/2236/636 62 -
office@hesse-maschinen.com
https://www.hesse-maschinen.com
#1069-2229 · Table Type Boring and Milling Machine
SPIRAL - SPIRAL UNI-32 (4537-025) - - 2000 -
Technical details
With stand Height adjustable table Operating manual in German with EC conformity declaration Does not comply with the german UVV and austrian AMVO
Datasheet
Request / Contact
- AS Maschinenhandel
- Welserstr. 10e
- 51149 Köln
- Deutschland
-
+49 (0)22031864856
+49 (0)22031864857 -
mail@asmaschinenhandel.de
www.asmaschinenhandel.de
#2044-10018 · Table Type Boring and Milling Machine
TOS - W75 - - 1998 -
Technical details
- FLECKENSTEIN Werkzeugmaschinen GmbH
- Sommerweg 15
- 63831 Wiesen
- Deutschland
-
+49 (0) 6096 9706 0
+49 (0) 6096 9706 20 -
fleckenstein@fleckenstein-machine.com
www.fleckenstein-machine.com
#1118-16220 · Table Type Boring and Milling Machine
Castel - GREEN 1T4 - - 1997 - HEIDENHAIN TNC 430
Technical details
Equipment. • CNC-control HEIDENHAIN 430 • support bearing • manual milling head • coolant tank with pump
Datasheet
Request / Contact
- Jansen Machinehandel BV
- Bredaseweg 210
- 4873 LA Etten-leur
- Nederland
-
+31 (0) 76 5015750
-
info@jansenmachinehandel.nl
www.jansenmachinehandel.nl
#2049-KOT180 · Table Type Boring and Milling Machine
Femco - WBT-100SR2 - - 1995 -
Technical details
- Intermach BV
- lange voor 71
- 8316BC Marknesse
- Niederlande
-
+31 (0)653235637
-
info@intermach.nl
www.intermach.nl
#2050-kot180 · Table Type Boring and Milling Machine
FEMCO1200 - WBT-100SR2 - - 1995 -
Technical details
Brand: Femco Type: WBT-100SR2 CNC brand: Mitsubishi CNC model: Meldas C3 Year of make: 1995-05 Facing support Table length: 1.440 mm Table width: 1.600 mm Spindle diameter: 100 mm ø Machine dimensions (lxwxh): 5.680 x 3.400 x 3.700 mm incl. right-angle milling head type Huron
- Markus Hirsch GmbH
- Hüttenstrasse 1
- 46284 Dorsten
- Deutschland
-
+49 2362 95035 12
+49 2362 95035 10 -
liersch@hirsch-maschinen.de
www.hirsch-maschinen.de
#1077-03004 · Table Type Boring and Milling Machine
TOS - WH 10 NC - - 1993 - Heidenhain
Technical details
- Harry Vraets Machinery B.V.
- Gezellenstraat 2
- 3861RD Nijkerk
- Niederlande
-
+31 (0)332452145
-
info@vraetsmachinery.com
www.vraetsmachinery.com
#2039-11152A · Table Type Boring and Milling Machine
TOS - WH 10 NC - - 1993 - Heidenhain TNC 135
Technical details
- Markus Hirsch GmbH
- Hüttenstrasse 1
- 46284 Dorsten
- Deutschland
-
+49 2362 95035 12
+49 2362 95035 10 -
liersch@hirsch-maschinen.de
www.hirsch-maschinen.de
#1077-02773 · Table Type Boring and Milling Machine
UNION - BFT 90/5 - - 1993 - Heidenhain
Technical details
- Markus Hirsch GmbH
- Hüttenstrasse 1
- 46284 Dorsten
- Deutschland
-
+49 2362 95035 12
+49 2362 95035 10 -
liersch@hirsch-maschinen.de
www.hirsch-maschinen.de
#1077-03461 · Table Type Boring and Milling Machine
TOS - W100A - - 1992 -
Technical details
TOP Manufacturer:
ASDORF -