European network of stockholding machinery dealers

Bitte einen Suchbegriff eingeben - Please enter a search term
Category:
    Manufacturer:
      Machines:
        Trader:

          Facing Lathe

          Machinelist: Facing Lathe


          Facing Lathe

          used Lathes Facing Lathe TADU FS 1250 CNC


          • Intermach BV
          • lange voor 71
          • 8316BC Marknesse
          • Niederlande

          • +31 (0)653235637
          • info@intermach.nl
            www.intermach.nl
          #2050-1010063 · Facing Lathe

          TADU - FS 1250 CNC - - NB - FAGOR 8050 T

          Technical details
          faceplate diameter 1800 mm︱turning diameter over slide rest 2500 mm︱turning length mm︱Control FAGOR 8050 T ︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱
          Stocknumber 1010063 Type of machine CNC Facelathe Make TADU Type FS 1250 Build in nb Type of control FAGOR, 8050T Turnung diameter over bed 2500 mm Additional information 4-jaws chuck 1800 mm
            faceplate diameter 1800 mm
            turning diameter over slide rest 2500 mm
            Control FAGOR 8050 T
            Description :
            Stocknumber 1010063
            Type of machine CNC Facelathe
            Make TADU
            Type FS 1250
            Build in nb
            Type of control FAGOR, 8050T
            Turnung diameter over bed 2500 mm


            Additional information
            4-jaws chuck 1800 mm



        • Intermach BV
        • lange voor 71
        • 8316BC Marknesse
        • Niederlande

        • Datasheet
          Request / Contact
          used Lathes Facing Lathe SEIGER SPL-CG1400


          • Amann Werkzeugmaschinen GmbH
          • Landshuter Straße 1
          • 85716 Unterschleißheim
          • Deutschland

          • (0049) 89 317754 0
            (0049) 89 3174262
          • info@amann-wzm.de
            www.amann-wzm.de
          #1006-17807 · Facing Lathe

          SEIGER - SPL-CG1400 - - 2018 - ManualPlus 620

          Technical details
          turning diameter over slide rest 1.400 mm︱faceplate diameter 1.000 mm︱x-travel 740 mm︱z-travel 402 mm︱Control ManualPlus 620 ︱Turning Speed - Range 1 1 - 250 U/min.︱Turning Speed - Range 2 1 - 710 U/min.︱power capacity at 60% / 100 % load 46 / 38 KW︱torque max. 6.000 Nm︱feed capacity X/Z 14 / 18 kN︱feed x/z-axis 1 - 8.000 mm/min︱max. workpiece weight -without tailstock 19.000 kg︱spindle taper DIN55027 Gr. 15 ︱spindle bore 130 mm︱spindle diameter in front bearing 220 mm︱total power requirement 60,00 kW︱weight of the machine ca. 7,50 t︱dimensions of the machine ca. 4,00 x 2,50 x H2,50 m︱
          HEIDENHAIN ManualPlus 620 Hydraulic power clamping device 3-jaw chuck SMW Autobloc Ø 1000 mm 4-fold steel holder PARAT "manual"
            turning diameter over slide rest 1.400 mm
            faceplate diameter 1.000 mm
            x-travel 740 mm
            z-travel 402 mm
            Control ManualPlus 620
            Turning Speed - Range 1 1 - 250 U/min.
            Turning Speed - Range 2 1 - 710 U/min.
            power capacity at 60% / 100 % lo. 46 / 38 KW
            torque max. 6.000 Nm
            feed capacity X/Z 14 / 18 kN
            feed x/z-axis 1 - 8.000 mm/min
            max. workpiece weight -without t. 19.000 kg
            spindle taper DIN55027 Gr. 15
            spindle bore 130 mm
            spindle diameter in front bearin. 220 mm
            total power requirement 60,00 kW
            weight of the machine ca. 7,50 t
            dimensions of the machine ca. 4,00 x 2,50 x H2,50 m
            Description :
            HEIDENHAIN ManualPlus 620
            Hydraulic power clamping device
            3-jaw chuck SMW Autobloc Ø 1000 mm
            4-fold steel holder PARAT "manual"


        • Amann Werkzeugmaschinen GmbH
        • Landshuter Straße 1
        • 85716 Unterschleißheim
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes Facing Lathe SEIGER REKORD CG1400


          • Amann Werkzeugmaschinen GmbH
          • Landshuter Straße 1
          • 85716 Unterschleißheim
          • Deutschland

          • (0049) 89 317754 0
            (0049) 89 3174262
          • info@amann-wzm.de
            www.amann-wzm.de
          #1006-17806 · Facing Lathe

          SEIGER - REKORD CG1400 - - 2009 - ManualPlus 620

          Technical details
          turning diameter over slide rest 1400 mm︱faceplate diameter 1.000 mm︱x-travel 725 mm︱z-travel 400 mm︱Control ManualPlus 620 ︱Turning Speed - Range 1 5 - 250 U/min.︱Turning Speed - Range 2 5 - 710 U/min.︱total power requirement 55 kW︱weight of the machine ca. 6,5 t︱dimensions of the machine ca. 4,8 x 2,5 x 2,1 m︱
          4-fold steel holder PARAT "manual" Manually operated faceplate ROEHM 4 jaws Ø 1000 mm
            turning diameter over slide rest 1400 mm
            faceplate diameter 1.000 mm
            x-travel 725 mm
            z-travel 400 mm
            Control ManualPlus 620
            Turning Speed - Range 1 5 - 250 U/min.
            Turning Speed - Range 2 5 - 710 U/min.
            total power requirement 55 kW
            weight of the machine ca. 6,5 t
            dimensions of the machine ca. 4,8 x 2,5 x 2,1 m
            Description :
            4-fold steel holder PARAT "manual"
            Manually operated faceplate ROEHM 4 jaws Ø 1000 mm


        • Amann Werkzeugmaschinen GmbH
        • Landshuter Straße 1
        • 85716 Unterschleißheim
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes Facing Lathe POREBA TZG 250 A


          • Kemmerich Werkzeugmaschinen
          • Im Rottfeld 1a
          • 40789 Monheim am Rhein
          • Deutschland

          • +49 2173 207474
            +49 2173 207473
          • info@kemmerich.biz
            www.kemmerich.biz
          #1020-19718 · Facing Lathe

          POREBA - TZG 250 A - - 1992 -

          Technical details
          faceplate diameter 2000 mm︱turning diameter over plate 2500 mm︱workpiece width - max. 300 mm︱turning diameter in the pit 3200 mm︱turning speed range - faceplate 0,5 - 100 U/min︱feed range 800 mm/min︱steel cross cut max. 70 x 70 mm²︱spindle bore 105 mm︱spindle diameter in front bearing 320 mm︱headstock travel cross 1000 mm︱max. workpiece weight between centers 25000 kg︱max. workpiece weight -without tailstock 6000 kg︱cross slide - travel 450 mm︱upper slide-adjustment 700 mm︱total power requirement 35 kW︱weight of the machine ca. 20 t︱
          - Digital Read Out - Chip Conveyor - Hydr. Copy Attachment
            faceplate diameter 2000 mm
            turning diameter over plate 2500 mm
            workpiece width - max. 300 mm
            turning diameter in the pit 3200 mm
            turning speed range - faceplate 0,5 - 100 U/min
            feed range 800 mm/min
            steel cross cut max. 70 x 70 mm²
            spindle bore 105 mm
            spindle diameter in front bearin. 320 mm
            headstock travel cross 1000 mm
            max. workpiece weight between ce. 25000 kg
            max. workpiece weight -without t. 6000 kg
            cross slide - travel 450 mm
            upper slide-adjustment 700 mm
            total power requirement 35 kW
            weight of the machine ca. 20 t
            Description :

            - Digital Read Out
            - Chip Conveyor
            - Hydr. Copy Attachment


        • Kemmerich Werkzeugmaschinen
        • Im Rottfeld 1a
        • 40789 Monheim am Rhein
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes Facing Lathe WMW-NILES DP1


          • Valk Machines BV
          • Kadijk 6
          • 8531XD Lemmer
          • Niederlande

          • +31 514562904
          • sales@valkmachines.com
            www.valkmachines.com
          #2079-011 · Facing Lathe

          WMW-NILES - DP1 - - 1986 -

          Technical details
          faceplate diameter 1250 mm︱turning diameter over slide rest 2500 mm︱turning length 4000 mm︱total power requirement 45 kW︱weight of the machine ca. 18 t︱required space 8 x 4 x 2,1 m︱
          Facing lathe WMW Niles with tailstock Centre height 1.250 mm Swing 2.500 mm over bed Centre distance 4.000 mm Travel of carriage 750 mm Longitudinal 630 mm crosslide 4-Jaw Chuck ø 1.250 mm Spindle speed 5,6 - 280 Rpm Spindle bore 100 mm Weight of workpiece 10.000 kg Featured with - Floorplates 4.500 x 2.200 mm - Powered tailstock - Documentation Country of origin Germany Motor power 45 kW Machine weight 18.000 kg Machine LxWxH 8.000 x 4.000 x 2.100 mm
            faceplate diameter 1250 mm
            turning diameter over slide rest 2500 mm
            turning length 4000 mm
            total power requirement 45 kW
            weight of the machine ca. 18 t
            required space 8 x 4 x 2,1 m
            Description :
            Facing lathe WMW Niles with tailstock
            Centre height 1.250 mm
            Swing 2.500 mm over bed
            Centre distance 4.000 mm
            Travel of carriage 750 mm
            Longitudinal 630 mm crosslide
            4-Jaw Chuck ø 1.250 mm
            Spindle speed 5,6 - 280 Rpm
            Spindle bore 100 mm
            Weight of workpiece 10.000 kg
            Featured with
            - Floorplates 4.500 x 2.200 mm
            - Powered tailstock
            - Documentation
            Country of origin Germany
            Motor power 45 kW
            Machine weight 18.000 kg
            Machine LxWxH 8.000 x 4.000 x 2.100 mm


        • Valk Machines BV
        • Kadijk 6
        • 8531XD Lemmer
        • Niederlande

        • Datasheet
          Request / Contact
          used Lathes Facing Lathe ZERBST DP05/W08


          • STEINHAND GmbH
          • Am Stahlwerk 15
          • 45527 Hattingen
          • Deutschland

          • +49 (0) 2324 / 977 26 - 01
            +49 (0) 2324 / 977 26 - 99
          • info@steinhand.de
            www.steinhand.de
          #2026-1376 · Facing Lathe

          ZERBST - DP05/W08 - - 1985 - 2010 - Siemens Sinumerik 840D-sl

          Technical details
          faceplate diameter 4.000 mm︱travel -x axis 4.500 mm︱travel -z axis 600 mm︱control Siemens Sinumerik 840D-sl ︱feed range 0 - 8.000 mm/min︱turning speeds 1) 0,7 - 5,6 U/min︱turning speeds 2) 2,8 - 22,4 U/min︱turning speeds 2,1 - 56 U/min︱tool taper Sauter
          Facing Lathe | ZERBST - DP05/W08 Scope of delivery: - Chip conveyor - Hydraulic unit The ZERBST - DP05/W08 has been retrofitted in 2010. The machine is in a well-maintained condition. Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: DP05W08 | DP05 W08 | DP05-W08
            faceplate diameter 4.000 mm
            travel -x axis 4.500 mm
            travel -z axis 600 mm
            control Siemens Sinumerik 840D-sl
            feed range 0 - 8.000 mm/min
            turning speeds 1) 0,7 - 5,6 U/min
            turning speeds 2) 2,8 - 22,4 U/min
            turning speeds 2,1 - 56 U/min
            tool taper Sauter
            Description :
            Facing Lathe | ZERBST - DP05/W08

            Scope of delivery:

            - Chip conveyor
            - Hydraulic unit

            The ZERBST - DP05/W08 has been retrofitted in 2010.

            The machine is in a well-maintained condition.

            Please refer to further technical details in the attachement of the offer.

            - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
            #Tags: DP05W08 | DP05 W08 | DP05-W08


        • STEINHAND GmbH
        • Am Stahlwerk 15
        • 45527 Hattingen
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes Facing Lathe RAVENSBURG K 900 KH


          • HANS - JÜRGEN GEIGER
          • James-Watt-Str. 12
          • 72555 Metzingen
          • Deutschland

          • (0049)-7123-18040
            (0049)-7123-18384
          • geiger@geiger-germany.com
            www.geiger-germany.com
          #1049-18011 · Facing Lathe

          RAVENSBURG - K 900 KH - - 1966 -

          Technical details
          faceplate diameter 0 mm︱turning diameter over slide rest 900 mm︱turning length 1.000 mm︱total power requirement 25 kW︱weight of the machine ca. 8 t︱dimensions of the machine ca. m︱
          Height of centres 550 mm Max. turning Æ 1200 mm Max. turning Æ over slides, approx. 900 mm Max. turning length, approx. 1000 mm Spindle bore, approx. 90 mm 24 spindle speeds 4.3 - 587 rpm Feeds, infinitely variable 1 - 170 mm/min Total load, approx. 25 kW - 380 V - 50 Hz Weight, approx. 8000 kg Accessories/specialities Two separate slides, each equipped with 2-coordinate copying equipment, program controlled by plugboard, strengthened bearings and spindle, hardened and ground guideways, FORKHARDT 3-jaw chuck/ face plate, separate switch cabinet and cooling equipment. This machine is suitable for complicated, high precision copying of heavy workpieces.
            turning diameter over slide rest 900 mm
            turning length 1.000 mm
            total power requirement 25 kW
            weight of the machine ca. 8 t
            Description :
            Height of centres 550 mm
            Max. turning Æ 1200 mm
            Max. turning Æ over slides, approx. 900 mm
            Max. turning length, approx. 1000 mm
            Spindle bore, approx. 90 mm
            24 spindle speeds 4.3 - 587 rpm
            Feeds, infinitely variable 1 - 170 mm/min
            Total load, approx. 25 kW - 380 V - 50 Hz
            Weight, approx. 8000 kg

            Accessories/specialities
            Two separate slides, each equipped with 2-coordinate copying
            equipment, program controlled by plugboard, strengthened bearings
            and spindle, hardened and ground guideways, FORKHARDT 3-jaw chuck/
            face plate, separate switch cabinet and cooling equipment.
            This machine is suitable for complicated, high precision copying
            of heavy workpieces.


        • HANS - JÜRGEN GEIGER
        • James-Watt-Str. 12
        • 72555 Metzingen
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes Facing Lathe WMW  ZERBST DP 4000


          • Markus Hirsch GmbH
          • Hüttenstrasse 1
          • 46284 Dorsten
          • Deutschland

          • +49 2362 95035 12
            +49 2362 95035 10
          • liersch@hirsch-maschinen.de
            www.hirsch-maschinen.de
          #1077-03798 · Facing Lathe

          WMW ZERBST - DP 4000 - - 1961 -

          Technical details
          faceplate diameter 3500 mm︱turning diameter 4000 mm︱centre distance 16000 mm︱turning speeds 0,71-33,5 U/min︱Rest 2 ︱tailstock quill taper MT ︱max. workpiece weight -without tailstock 6300 kg︱max. workpiece weight between centres 18000 kg︱Plate area mm︱total power requirement 31 kW︱weight of the machine ca. 50 t︱dimensions of the machine ca. m︱
            faceplate diameter 3500 mm
            turning diameter 4000 mm
            centre distance 16000 mm
            turning speeds 0,71-33,5 U/min
            Rest 2
            max. workpiece weight -without t. 6300 kg
            max. workpiece weight between ce. 18000 kg
            total power requirement 31 kW
            weight of the machine ca. 50 t


        • Markus Hirsch GmbH
        • Hüttenstrasse 1
        • 46284 Dorsten
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes Facing Lathe HEYLIGENSTAEDT 6P


          • ATMH Werkzeugmaschinenhandel GmbH
          • Scharpenbergerstr.96-98
          • 58256 Ennepetal
          • Deutschland

          • +49 (0) 2333 / 403 43 70
            +49 (0) 2333 / 403 43 75
          • info@atmh.de
            www.atmh.de
          #2065-S1897 · Facing Lathe

          HEYLIGENSTAEDT - 6P - - 1953 -

          Technical details
          turning length / mm︱turning diameter over plate // mm︱faceplate diameter / mm︱
          Faceplate diameter: 3500mm Center height over plate: 1320mm Turning diameter over plate: 2600mm Turning diameter in the pit: 3600mm Turning diameter over bed: 1300mm Turning length: about 2400mm Max. workpiece weight: 22000kg Max. torque on the faceplate: 5000 mkg Faceplate ring gear pitch circle diameter: 1900mm Main spindle bore: 120mm range of speeds normal: 0.71-35.5 rpm increased: 1-50 rpm increased: 1.4-71 rpm Drive power: 38kW
            turning length / mm
            turning diameter over plate // mm
            faceplate diameter / mm
            Description :
            Faceplate diameter: 3500mm
            Center height over plate: 1320mm
            Turning diameter over plate: 2600mm
            Turning diameter in the pit: 3600mm
            Turning diameter over bed: 1300mm
            Turning length: about 2400mm
            Max. workpiece weight: 22000kg
            Max. torque on the faceplate: 5000 mkg
            Faceplate ring gear pitch circle diameter: 1900mm
            Main spindle bore: 120mm
            range of speeds
            normal: 0.71-35.5 rpm
            increased: 1-50 rpm
            increased: 1.4-71 rpm
            Drive power: 38kW


        • ATMH Werkzeugmaschinenhandel GmbH
        • Scharpenbergerstr.96-98
        • 58256 Ennepetal
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes Facing Lathe LIEBER 823681


          • Markus Hirsch GmbH
          • Hüttenstrasse 1
          • 46284 Dorsten
          • Deutschland

          • +49 2362 95035 12
            +49 2362 95035 10
          • liersch@hirsch-maschinen.de
            www.hirsch-maschinen.de
          #1077-03153 · Facing Lathe

          LIEBER - 823681 - - -

          Technical details
          faceplate diameter 3200 mm︱slide adjustment 800 mm︱turning speeds 1,5-78 U/min︱stepless reg. with elect. turning speeds ︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱
            faceplate diameter 3200 mm
            slide adjustment 800 mm
            turning speeds 1,5-78 U/min


        • Markus Hirsch GmbH
        • Hüttenstrasse 1
        • 46284 Dorsten
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes Facing Lathe NILES DP630/3at


          • Markus Hirsch GmbH
          • Hüttenstrasse 1
          • 46284 Dorsten
          • Deutschland

          • +49 2362 95035 12
            +49 2362 95035 10
          • liersch@hirsch-maschinen.de
            www.hirsch-maschinen.de
          #1077-02845 · Facing Lathe

          NILES - DP630/3at - - -

          Technical details
          3-jaw-chuck diameter 630 mm︱turning diameter over slide rest 650 mm︱turning length 500 mm︱turning dia. in gap 1420 mm︱digital readout Mitutoyo ︱turning speeds 3,55-710 U/min︱total power requirement 24 kW︱weight of the machine ca. 9 t︱dimensions of the machine ca. m︱
            3-jaw-chuck diameter 630 mm
            turning diameter over slide rest 650 mm
            turning length 500 mm
            turning dia. in gap 1420 mm
            digital readout Mitutoyo
            turning speeds 3,55-710 U/min
            total power requirement 24 kW
            weight of the machine ca. 9 t


        • Markus Hirsch GmbH
        • Hüttenstrasse 1
        • 46284 Dorsten
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes Facing Lathe RAVENSBURG


          • Markus Hirsch GmbH
          • Hüttenstrasse 1
          • 46284 Dorsten
          • Deutschland

          • +49 2362 95035 12
            +49 2362 95035 10
          • liersch@hirsch-maschinen.de
            www.hirsch-maschinen.de
          #1077-03540 · Facing Lathe

          RAVENSBURG - - - -

          Technical details
          faceplate diameter 1300 mm︱turning diameter over slide rest 850 mm︱centre distance 1800 mm︱turning diameter 2150 mm︱turning speeds 3,15-160 U/min︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱
            faceplate diameter 1300 mm
            turning diameter over slide rest 850 mm
            centre distance 1800 mm
            turning diameter 2150 mm
            turning speeds 3,15-160 U/min


        • Markus Hirsch GmbH
        • Hüttenstrasse 1
        • 46284 Dorsten
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes Facing Lathe MEUSER 1500/1400


          • AS Maschinenhandel
          • Welserstr. 10e
          • 51149 Köln
          • Deutschland

          • +49 (0)22031864856
            +49 (0)22031864857
          • mail@asmaschinenhandel.de
            www.asmaschinenhandel.de
          #2044-100111 · Facing Lathe

          MEUSER - 1500/1400 - - -

          Technical details
          faceplate diameter 1400 mm︱turning diameter over slide rest 1400 mm︱centre distance 1500 mm︱turning length mm︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱
            faceplate diameter 1400 mm
            turning diameter over slide rest 1400 mm
            centre distance 1500 mm


        • AS Maschinenhandel
        • Welserstr. 10e
        • 51149 Köln
        • Deutschland

        • Datasheet
          Request / Contact

          Lathe - cycle-controlled

          used Lathes Lathe -  cycle-controlled UNITECH UT 560


          • WeMa Antonius Pigge GmbH
          • Barnstorfer Str. 3
          • 49424 Goldenstedt
          • Deutschland

          • +49 (0)444496700
            +49 (0)4444967010
          • info@wema-pigge.de
            www.wema-pigge.de
          #2031-3666 · Lathe - cycle-controlled

          UNITECH - UT 560 - - 2014 - Siemens Sinumerik 828 D

          Technical details
          greates pass round over bed 560 mm︱turning length 1500 mm︱control Siemens Sinumerik 828 D ︱swing diameter over slide rest 390 mm︱spindle speed: 2400 Upm︱bed width 345 mm︱spindle bore 80 mm︱diameter of quill 75 mm︱quill stroke 200 mm︱tailstock quill taper MT 5 ︱3-jaw chuck Schunk Rota S 315 ︱3-jaw-chuck diameter 315 mm︱main drive 14 kW︱weight of the machine ca. 2900 kg︱dimensions of the machine ca. m︱
          removeable bed bridge user interface control: Shopturn hydraulical tailstock quill adjustment key bar chuck Schunk Rota S+ 2.0 315-92 quick change tool holder Choromant Capto
            greates pass round over bed 560 mm
            turning length 1500 mm
            control Siemens Sinumerik 828 D
            swing diameter over slide rest 390 mm
            spindle speed: 2400 Upm
            bed width 345 mm
            spindle bore 80 mm
            diameter of quill 75 mm
            quill stroke 200 mm
            tailstock quill taper MT 5
            3-jaw chuck Schunk Rota S 315
            3-jaw-chuck diameter 315 mm
            main drive 14 kW
            weight of the machine ca. 2900 kg
            Description :
            removeable bed bridge

            user interface control: Shopturn

            hydraulical tailstock quill adjustment

            key bar chuck Schunk Rota S+ 2.0 315-92

            quick change tool holder Choromant Capto






        • WeMa Antonius Pigge GmbH
        • Barnstorfer Str. 3
        • 49424 Goldenstedt
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes Lathe -  cycle-controlled PINACHO Smart turn 8 225


          • FIMOTEC
          • 20 RUE AMPERE
          • 67500 HAGUENAU
          • Frankreich

          • +33 (0)388720247
            +33 (0)388936066
          • FIMOTEC@WANADOO.FR
            WWW.FIMOTEC.FR
          #1105-03977 · Lathe - cycle-controlled

          PINACHO - Smart turn 8 225 - - 2013 - FAGOR TC 8055

          Technical details
          turning diameter 450 mm︱turning length 1500 mm︱control FAGOR TC 8055︱total power requirement 15 kW︱weight of the machine ca. 3 t︱dimensions of the machine ca. 2.29X1 X 1.2 m︱
          TEACH IN CNC LATHE Pinacho offers the CNC flat bed lathe ST-225. This is a fast and accurate machine up to 450 mm in swing over bed, 1500 mm in distance between centers and 65 mm in spindle bore. 2 or 3 axis parallel lathes combined with Fagor controL. The available power up to 15 kW in addition to the high rotary speed and low vibrations provided by the servomotor and headstock design make the ST-225 an authentic leader in its category.
            turning diameter 450 mm
            turning length 1500 mm
            control FAGOR TC 8055
            total power requirement 15 kW
            weight of the machine ca. 3 t
            dimensions of the machine ca. 2.29X1 X 1.2 m
            Description :
            TEACH IN CNC LATHE
            Pinacho offers the CNC flat bed lathe ST-225. This is a fast and accurate
            machine up to 450 mm in swing over bed, 1500 mm in distance between centers and
            65 mm in spindle bore. 2 or 3 axis parallel lathes combined with Fagor controL.
            The available power up to 15 kW in addition to the high rotary speed and low
            vibrations provided by the servomotor and headstock design make the ST-225 an
            authentic leader in its category.


        • FIMOTEC
        • 20 RUE AMPERE
        • 67500 HAGUENAU
        • Frankreich

        • Datasheet
          Request / Contact
          used Lathes Lathe -  cycle-controlled CAZENEUVE OPTIMAX 360


          • Marcels Maschinen AG
          • Anthoptstrasse 11
          • 8222 Beringen (Schaffhausen)
          • Schweiz

          • (0041) 44 872 3400
            (0041) 44 872 3403
          • info@marcels-maschinen.ch
            http://www.marcels-maschinen.ch
          #1065-4829 · Lathe - cycle-controlled

          CAZENEUVE - OPTIMAX 360 - - 2013 - SIEMENS

          Technical details
          turning diameter 380 mm︱turning length 700 mm︱control SIEMENS ︱spindle turning speed - stepless 2500 U/min︱tailstock quill taper MT 4 ︱weight 1.5 t︱dimensions of the machine ca. 2000x1400x1820 mmxmmxmm︱
            turning diameter 380 mm
            turning length 700 mm
            control SIEMENS
            spindle turning speed - stepless 2500 U/min
            tailstock quill taper MT 4
            weight 1.5 t
            dimensions of the machine ca. 2000x1400x1820 mmxmmxmm


        • Marcels Maschinen AG
        • Anthoptstrasse 11
        • 8222 Beringen (Schaffhausen)
        • Schweiz

        • Datasheet
          Request / Contact
          used Lathes Lathe -  cycle-controlled WAGNER WDE 500


          • Kirchgeorg Werkzeugmaschinen
          • Frankfurter Straße 141
          • 63303 Dreieich-Sprendlingen
          • Deutschland

          • 0049-(0)-6103-9909-0
            0049-(0)-6103-9909-50
          • info@kirchgeorg.de
            www.kirchgeorg.de
          #1072-20401 · Lathe - cycle-controlled

          WAGNER - WDE 500 - - 2010 - Sinumerik

          Technical details
          centre height 250 mm︱centre distance 1500 mm︱turning diameter over bed 500 mm︱turning diameter over slide 280 mm︱turning length 1500 mm︱spindle taper D8 ︱control Sinumerik ︱bed width 390 mm︱spindle bore 82 mm︱turning speed range 45-2000 U/min︱rapid travel - longitudinal/face 8/4 m/min︱3-jaw-chuck diameter 250 mm︱quick change toolholder System Multifix ︱drive capacity - spindle motor 6,5 kW︱taper in tailstock-quill MK 5 ︱dia. of quill 75 mm︱quill stroke 150 mm︱coolant 3,0 ︱voltage 400 V︱total power requirement 24 kVA︱
          - Serial-No. G01262 - Control: Sinumerik 802 C
            centre height 250 mm
            centre distance 1500 mm
            turning diameter over bed 500 mm
            turning diameter over slide 280 mm
            turning length 1500 mm
            spindle taper D8
            control Sinumerik
            bed width 390 mm
            spindle bore 82 mm
            turning speed range 45-2000 U/min
            rapid travel - longitudinal/face 8/4 m/min
            3-jaw-chuck diameter 250 mm
            quick change toolholder System Multifix
            drive capacity - spindle motor 6,5 kW
            taper in tailstock-quill MK 5
            dia. of quill 75 mm
            quill stroke 150 mm
            coolant 3,0
            voltage 400 V
            total power requirement 24 kVA
            Description :
            - Serial-No. G01262
            - Control: Sinumerik 802 C


        • Kirchgeorg Werkzeugmaschinen
        • Frankfurter Straße 141
        • 63303 Dreieich-Sprendlingen
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes Lathe -  cycle-controlled SEIGER SLZ 620E


          • Gustav Schönberger GmbH
          • Hünderstr. 14
          • 74080 Heilbronn
          • Deutschland

          • (0049)7131 46060
            (0049)7131 460620
          • schoenberger@gsh-maschinen.de
            www.gsh-maschinen.de
          #1036-032992 · Lathe - cycle-controlled

          SEIGER - SLZ 620E - - 2010 - Sinumerik 840D SL

          Technical details
          turning diameter 660 mm︱centre distance 3000 mm︱control Sinumerik 840D SL ︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱turning length mm︱
          Sinumerik 840D SL control 3-jaw chuck diameter 315mm 4-fold Parat tool holder device steady rest 12mm – 150mm steady rest 120mm – 270mm tail stock chip conveyor coolant device Technische Daten / technical details: Spitzenweite / center to center 3000 mm Umlufdurchmesser über Bett / rotary diameter over bed 660 mm Umlaufdurchmesser über Schlitten / rotary diameter over sledge 435 mm Spindelbohrung / spindle hole 93 mm Drehzahlbereich (2-stufig) / spindle speed (2-steps) 1-2500 UpM /rpm Eilgang X, Z / rapid feed X, Z 8/10 m/min Reitstockaufnahme / tail stock taper MK6 Antriebsleistung Spindel 100/60%ED / drive capacity spindle 100/60%ED 22/30 kW Gewicht der Maschine ca. / weight ca. 6300 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding.
            turning diameter 660 mm
            centre distance 3000 mm
            control Sinumerik 840D SL
            Description :
            Sinumerik 840D SL control
            3-jaw chuck diameter 315mm
            4-fold Parat tool holder device
            steady rest 12mm – 150mm
            steady rest 120mm – 270mm
            tail stock
            chip conveyor
            coolant device

            Technische Daten / technical details:
            Spitzenweite / center to center 3000 mm
            Umlufdurchmesser über Bett / rotary diameter over bed 660 mm
            Umlaufdurchmesser über Schlitten / rotary diameter over sledge 435 mm
            Spindelbohrung / spindle hole 93 mm
            Drehzahlbereich (2-stufig) / spindle speed (2-steps) 1-2500 UpM /rpm
            Eilgang X, Z / rapid feed X, Z 8/10 m/min
            Reitstockaufnahme / tail stock taper MK6
            Antriebsleistung Spindel 100/60%ED / drive capacity spindle 100/60%ED 22/30
            kW
            Gewicht der Maschine ca. / weight ca. 6300 kg
            Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich -
            Technical data, accessories and description of the machine are not binding.





        • Gustav Schönberger GmbH
        • Hünderstr. 14
        • 74080 Heilbronn
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes Lathe -  cycle-controlled SEIGER SLZ 1200 x 6000


          • EMUK GmbH Werkzeugmaschinen
          • Siemensstrasse 24 a
          • 76316 Malsch
          • Deutschland

          • +49 (0) 7246 1392
            +49 (0) 7246 1394
          • info@emuk.de
            www.emuk.de
          #1058-23228 · Lathe - cycle-controlled

          SEIGER - SLZ 1200 x 6000 - - 2009 - Heidenhain

          Technical details
          turning diameter 1250 mm︱turning length 6000 mm︱control Heidenhain ︱spindle bore 130 mm︱0 5-710 U/min︱transmission ratio 2 ︱workpiece weight 7000 kg︱total power requirement 37/52 kW︱weight of the machine ca. 16 t︱dimensions of the machine ca. 12x4x2 m︱
          2 Technical data 2.1 Mechanics Working range centre distance: 6000 mm Circulation diameter over bed track: 1250 mm Circulation diameter over facing slide: 850 mm Displacement of the facing slide: 680 mm Bed width: 750 mm Turning tool cross-section (height x width) 40x40 mm Turning spindle Spindle head according to DIN 55027 - size 11 Spindle diameter in front bearing: 190 mm Spindle bore: 130 mm Main drive AC drive power 100% / 60% ED - KW 37 / 52 Max. torque at the spindle approx. 9000 Nm Speed range: 5 - 710 min(-1) Feed drive AC X-feed force 100% ED - 30000 N Z feed force 100% ED - 20000 N X rapid traverse m/min 6 Y rapid traverse m/min 3 Tailstock Quill diameter: 160 mm Quill stroke: 315 mm Quill holder (inner taper) MK 6 Fixed steady rest Clearance (max.) (option): 450 mm Impulse lubrication Flow rate: |/min 0.1 Pump pressure: 30 bar Tank capacity: 2 dm³ Recirculating lubrication Flow rate: |/min 5 Pump pressure: 0.4 bar Tank capacity: 40 dm³
            turning diameter 1250 mm
            turning length 6000 mm
            control Heidenhain
            spindle bore 130 mm
            0 5-710 U/min
            transmission ratio 2
            workpiece weight 7000 kg
            total power requirement 37/52 kW
            weight of the machine ca. 16 t
            dimensions of the machine ca. 12x4x2 m
            Description :
            2 Technical data
            2.1 Mechanics

            Working range centre distance: 6000 mm
            Circulation diameter over bed track: 1250 mm
            Circulation diameter over facing slide: 850 mm
            Displacement of the facing slide: 680 mm
            Bed width: 750 mm

            Turning tool cross-section (height x width) 40x40 mm

            Turning spindle Spindle head according to DIN 55027 - size 11
            Spindle diameter in front bearing: 190 mm
            Spindle bore: 130 mm

            Main drive AC drive power 100% / 60% ED - KW 37 / 52
            Max. torque at the spindle approx. 9000 Nm
            Speed range: 5 - 710 min(-1)

            Feed drive AC

            X-feed force 100% ED - 30000 N
            Z feed force 100% ED - 20000 N
            X rapid traverse m/min 6
            Y rapid traverse m/min 3

            Tailstock

            Quill diameter: 160 mm
            Quill stroke: 315 mm
            Quill holder (inner taper) MK 6

            Fixed steady rest Clearance (max.) (option): 450 mm

            Impulse lubrication
            Flow rate: |/min 0.1
            Pump pressure: 30 bar
            Tank capacity: 2 dm³

            Recirculating lubrication
            Flow rate: |/min 5
            Pump pressure: 0.4 bar
            Tank capacity: 40 dm³


        • EMUK GmbH Werkzeugmaschinen
        • Siemensstrasse 24 a
        • 76316 Malsch
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes Lathe -  cycle-controlled VDF BOEHRINGER DUS 630 TI


          • FIMOTEC
          • 20 RUE AMPERE
          • 67500 HAGUENAU
          • Frankreich

          • +33 (0)388720247
            +33 (0)388936066
          • FIMOTEC@WANADOO.FR
            WWW.FIMOTEC.FR
          #1105-03777 · Lathe - cycle-controlled

          VDF BOEHRINGER - DUS 630 TI - - 2007 - HEINDENHAIN MANUEL PLUS 411

          Technical details
          swing diameter max. 640 mm︱turning length max. 3.000 mm︱control HEINDENHAIN MANUEL PLUS 411︱swing diameter over face slide 435 mm︱radial face slide travel 345 mm︱centre height 280 mm︱bed width 360 mm︱Main spindle: ︱turning speed range - main spindle 3 - 2.500 min/-1︱power capacity - main spindel 19 / 15 kW︱max. Torque 2500 Nm︱transmission ratio 2 ︱spindle nose DIN 55027 / 8 ︱spindle bearing diameter 100 mm︱max. bar capacity 95 mm︱usable bar diameter 80 mm︱chucking diameter 415 mm︱turret: ︱number of toolpositions PARRAT 4 FACH pos.4︱tool taper DIN 69880 / 32 X 25
          Lathe - cycle controled VDF BOEHRINGER - DUS 630 TI X 3000 YEAR 2007 CNC HEIDENHAIN MANUEL PLUS 411
            swing diameter max. 640 mm
            turning length max. 3.000 mm
            control HEINDENHAIN MANUEL PLUS 411
            swing diameter over face slide 435 mm
            radial face slide travel 345 mm
            centre height 280 mm
            bed width 360 mm
            turning speed range - main spind. 3 - 2.500 min/-1
            power capacity - main spindel 19 / 15 kW
            max. Torque 2500 Nm
            transmission ratio 2
            spindle nose DIN 55027 / 8
            spindle bearing diameter 100 mm
            max. bar capacity 95 mm
            usable bar diameter 80 mm
            chucking diameter 415 mm
            number of toolpositions PARRAT 4 FACH pos.4
            tool taper DIN 69880 / 32 X 25
            Description :
            Lathe - cycle controled
            VDF BOEHRINGER - DUS 630 TI X 3000 YEAR 2007
            CNC HEIDENHAIN MANUEL PLUS 411


        • FIMOTEC
        • 20 RUE AMPERE
        • 67500 HAGUENAU
        • Frankreich

        • Datasheet
          Request / Contact
          used Lathes Lathe -  cycle-controlled KERN-DMT CD 402


          • Marcels Maschinen AG
          • Anthoptstrasse 11
          • 8222 Beringen (Schaffhausen)
          • Schweiz

          • (0041) 44 872 3400
            (0041) 44 872 3403
          • info@marcels-maschinen.ch
            http://www.marcels-maschinen.ch
          #1065-J668 · Lathe - cycle-controlled

          KERN-DMT - CD 402 - - 2007 - SIEMENS 840D SL Shopturn

          Technical details
          control SIEMENS 840D SL Shopturn ︱turning dia. over bed 400 mm︱centre height 200 mm︱centre distance 1000 mm︱turning dia. over face-slide 230 mm︱spindle bore 64 mm︱bar capacity 52 mm︱weight of the machine ca. 2,5 t︱dimensions of the machine ca. 2800x1650x1750 mm︱
            control SIEMENS 840D SL Shopturn
            turning dia. over bed 400 mm
            centre height 200 mm
            centre distance 1000 mm
            turning dia. over face-slide 230 mm
            spindle bore 64 mm
            bar capacity 52 mm
            weight of the machine ca. 2,5 t
            dimensions of the machine ca. 2800x1650x1750 mm


        • Marcels Maschinen AG
        • Anthoptstrasse 11
        • 8222 Beringen (Schaffhausen)
        • Schweiz

        • Datasheet
          Request / Contact
          used Lathes Lathe -  cycle-controlled SEIGER SLZ800 / 1500


          • SK Maschinen-Service GmbH
          • Tackweg 4
          • 47918 Tönisvorst
          • Deutschland

          • 02151 79350
            02151 793535
          • info@sk-maschinen.de
            www.sk-maschinen.de
          #1038-20957 · Lathe - cycle-controlled

          SEIGER - SLZ800 / 1500 - - 2006 - SIEMENS SINUMERIK 810 Dpl

          Technical details
          turning diameter 800 mm︱turning length 1500 mm︱control SIEMENS SINUMERIK 810 Dpl ︱workpiece weight flying clamped 750 ︱workpiece weight with one steady 2200 kg︱swing diameter over face slide 540 mm︱power capacity 20/28 kW︱spindle bore 83 mm︱weight of the machine ca. 6 t︱dimensions of the machine ca. 3,5x2,8x2 m︱
          gearbox must be checked!! machine without tailstock! -without tools -without jaws
            turning diameter 800 mm
            turning length 1500 mm
            control SIEMENS SINUMERIK 810 Dpl
            workpiece weight flying clamped 750
            workpiece weight with one steady 2200 kg
            swing diameter over face slide 540 mm
            power capacity 20/28 kW
            spindle bore 83 mm
            weight of the machine ca. 6 t
            dimensions of the machine ca. 3,5x2,8x2 m
            Description :
            gearbox must be checked!!
            machine without tailstock!
            -without tools
            -without jaws


        • SK Maschinen-Service GmbH
        • Tackweg 4
        • 47918 Tönisvorst
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes Lathe -  cycle-controlled WEILER E 70 x 2000


          • Matthias Ehlers Werkzeugmaschinen
          • Nikolaus-Otto-Straße 19 + 21
          • 22946 Trittau
          • Deutschland

          • +49 (0)4154 - 986 99 12
            +49 (0)4154 - 986 99 14
          • anfrage@ehlers-wzm.de
            www.ehlers-wzm.de
          #2033-2024038 · Lathe - cycle-controlled

          WEILER - E 70 x 2000 - - 2006 -

          Technical details
          greates pass round over bed 720 mm︱swing over plan sled 430 mm︱centre height 360 mm︱turning length 2.000 mm︱bed width 480 mm︱adjustment of the upper slide 140 mm︱main spindle: ︱turning speeds 1.800 U/min︱Drive power 60/100% ED 37,5 / 30 kW︱spindle bore 106 mm︱
          In our opinion, the machine is in good used condition Condition and can be viewed under power by appointment. The machine will be available from July 2024. Technical features: - Three-jaw chuck - Ready steel holder - DFX data import - Coolant device ***Accessories, tools and clamping devices shown are only included in the scope of delivery if this is noted in the additional information.*** ***Changes and errors in the technical data and information as well Subject to prior sale!***
            greates pass round over bed 720 mm
            swing over plan sled 430 mm
            centre height 360 mm
            turning length 2.000 mm
            bed width 480 mm
            adjustment of the upper slide 140 mm
            turning speeds 1.800 U/min
            Drive power 60/100% ED 37,5 / 30 kW
            spindle bore 106 mm
            Description :
            In our opinion, the machine is in good used condition
            Condition and can be viewed under power by appointment.

            The machine will be available from July 2024.

            Technical features:
            - Three-jaw chuck
            - Ready steel holder
            - DFX data import
            - Coolant device

            ***Accessories, tools and clamping devices shown are only included in the scope
            of delivery
            if this is noted in the additional information.***

            ***Changes and errors in the technical data and information as well
            Subject to prior sale!***


        • Matthias Ehlers Werkzeugmaschinen
        • Nikolaus-Otto-Straße 19 + 21
        • 22946 Trittau
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes Lathe -  cycle-controlled SOMAB OPTIMAB 450


          • FIMOTEC
          • 20 RUE AMPERE
          • 67500 HAGUENAU
          • Frankreich

          • +33 (0)388720247
            +33 (0)388936066
          • FIMOTEC@WANADOO.FR
            WWW.FIMOTEC.FR
          #1105-03940 · Lathe - cycle-controlled

          SOMAB - OPTIMAB 450 - - 2005 - SOMAB PL + S NUM 1060

          Technical details
          turning diameter 400 mm︱turning length 1100 mm︱control SOMAB PL + S NUM 1060︱turning dia. over face-slide 350 mm︱turning diameter over cross slideways 320 mm︱main drive motor 12 kW︱spindle turning speed range 4500 U/min︱spindle passage 73 mm︱chucking diameter 250 mm︱taper in tailstock MT 4 ︱total power requirement 23 kW︱weight of the machine ca. 5 t︱
          Machine in inclined bed execution with NUM-SOMAB PL+S3 cycle control with 12 POSTES TURRET
            turning diameter 400 mm
            turning length 1100 mm
            control SOMAB PL + S NUM 1060
            turning dia. over face-slide 350 mm
            turning diameter over cross slid. 320 mm
            main drive motor 12 kW
            spindle turning speed range 4500 U/min
            spindle passage 73 mm
            chucking diameter 250 mm
            taper in tailstock MT 4
            total power requirement 23 kW
            weight of the machine ca. 5 t
            Description :
            Machine in inclined bed execution
            with NUM-SOMAB PL+S3 cycle control
            with 12 POSTES TURRET


        • FIMOTEC
        • 20 RUE AMPERE
        • 67500 HAGUENAU
        • Frankreich

        • Datasheet
          Request / Contact
          •   
          •   
          • 1  
          • 2  
          • 3  
          • 4  
          •   
          •   

          TOP Manufacturer:

          RAVENSBURG -