Lathes
Machinelist: Lathes
CNC Turning- and Milling Center
- Isabelle Knops
- Opladener Str. 126
- 40789 Monheim am Rhein
- Deutschland
-
+49 (0)2173-4999611
+49 (0)2173-8546560 -
isabelle.knops@isabelleknops.com
www.isabelleknops.com
#2013-0005 · CNC Turning- and Milling Center
WFL - M120 MILLTURN x 5000 - - 2008 - Siemens 840D pl
Technical details
Multifunctional Turning-Boring-Milling Centre / Brand: WFL Type: M120 MILLTURN x 5000 / Year of construction: 2008 The machine can be inspected by appointment under power. Very well-maintained used, functional condition. TECHNICAL DATA: - CNC Control: Siemens 840D Working area: - Nominal width/turning length: 5.000 mm - Swing diameter over top slide: 1.140 mm - Swing diameter via telescope left/right: 1.160 mm - Swing diameter over setting block slide: 1.150 mm - Height of turning centre over floor: 1.555 mm - Connected load: 145 kW/162 kVA - Machine weight: approx. 56 tons - Main machine dimensions (Length/Width/Height): approx. 15.497* x 5.342 x4.277 mm ACCESSORIES/EQUIPMENT: - Boring bar vibration-damped, brand: Sandvik - Electrostatic suction, brand: UAS - Steady rest, brand: SMW Autoblock - Turning-boring-milling unit - Tool magazine: 90 positions - Electronic hand wheel - Coolant device - Infrared measuring probe, brand: m&h - Chip conveyor (paper belt filter), brand: POLO - Documentation - CE marking There is no guarantee for correctness and completeness of the technical details and accessories. - Subject to prior sale - Detailed technical data sheet and information on equipment available on request.
Heavy Duty Lathe
- Isabelle Knops
- Opladener Str. 126
- 40789 Monheim am Rhein
- Deutschland
-
+49 (0)2173-4999611
+49 (0)2173-8546560 -
isabelle.knops@isabelleknops.com
www.isabelleknops.com
#2013-E0294 · Heavy Duty Lathe
GIANA - GFSC 12 CNC - - 2007 - Sinumerik 840D
Technical details
Heavy duty lathe with milling and grinding function / Brand: GIANA / Type: GFSC 12 CNC / Year of construction: 2007 The machine can be inspected by appointment under working condition. TECHNICAL SPECIFICATIONS: - Turning diameter over bed: 1.200 mm - Turning diameter over slide rest: 710 mm - Turning length: 7.000 mm - CNC Control: SIEMENS SINUMERIK 840D EQUIPMENT/ACCESSORIES: - Cooling lubricant system - Chip conveyor - Various accessories: Steady rests .... There is no guarantee for correctness and completeness of the technical details and accessories. Detailed technical data sheet and information on equipment available on request.
Vertical Turret Lathe - Double Column
- Isabelle Knops
- Opladener Str. 126
- 40789 Monheim am Rhein
- Deutschland
-
+49 (0)2173-4999611
+49 (0)2173-8546560 -
isabelle.knops@isabelleknops.com
www.isabelleknops.com
#2013-E0432 · Vertical Turret Lathe - Double Column
SCHIESS-FRORIEP - 32 DS 250 - - 1982/2005 - Sinumerik 840D
Technical details
Vertical Turret Lathe - Double Column / Brand: SCHIESS-FRORIEP / Type: 32 DS 250 Year of construction: 1982 / Modernization: 2005 The modernization included: - New CNC Control: Siemens Sinumerik 840D - New electrical cabinets The machine can be inspected by appointment. Condition: Functional / ready for use. TECHNICAL SPECIFICATIONS: Main dimensions and travels: - Faceplate diameter: 2.500 mm - Turning- and swing diameter max.: 3.200 mm - Turning height above faceplate max.: 2.000 mm - Faceplate load (permissible): 25 tons - Slots: 6 clamping slides - Special chuck with balancing system Right crossbeam support( Travel vertical): 900 mm Right crossbeam support ( Travel horizontal): 1.860 mm - Cross section of the turret head: 400 x 400 mm - Smallest immersion diameter: 710 mm - Tool system description: WSD 200 mm - Shank cross-section of the tools: 40 x 40 mm Left crossbeam support (Travel vertical): 1.000 mm Left crossbeam support (Travel horizontal): 1.770 mm* * of which 50 mm above faceplate centre. The tool changer range is 360 mm. This distance is measured from the reference point to the right. - Cross-section of the chisel slide: 250 x 210 mm - Smallest immersion diameter: 330 mm - Tool system description: WSD 200 mm - Shank cross-section of the tools: 40 x 40 mm Crossbeam, travel (min/max): 50 / 1.500 mm Speeds, feeds, adjustment speeds, cutting forces: Faceplate drive: - Number of gear steps: 2 - Number of speed steps per gear stage: 29 - Step jump: 1,12 - Speed range of I. gear stage: 1,25 - 10 - 31,5 rpm - Speed range of II. gear stage: 5 - 40 - 125 rpm - Nominal speed: 10 rpm Feed drive, right crossbeam support: - Feed rate: 0,1 - 1.000 mm/min - Feed rate: 0,01 - 50 U/mm - Step change: 1,12 - Adjustment speeds in the fixed steps (set up): 2; 20; 200; 6.000 mm/min - Cutting force at 300 mm extension: 50 kN Feed drive, left crossbeam support: - Feed rate: 0,1 - 1.000 mm/min - Feed rate: 0,01 - 50 U/mm - Step change: 1,12 - Adjustment speeds in the fixed steps (set up): 2; 20; 200; 6.000 mm/min Feed drive, side support: - Step change: 1,12 - Cutting force at 450 mm extension: 25 kN Crossbeam adjustment: - Crossbeam speed: approx. 500 mm/min Power, speeds, torques, connection values: Faceplate drive: - Motor power: 12,5 - 100 - 100 kW - Motor speed: 100 - 800 - 2.500 rpm - Torque at the faceplate: 80 kNm Feed drive (right crossbeam support): - Motor power: 5,8 kW - Motor speed: 0,03 / 1.875 rpm - Motor torque: 38 Nm Hydraulic and lubrication systems: - Power of the hydraulic pump motor (central unit): 4 kW - Output of the oil return pump (gearbox, base unit): 0,55 kW - Power of the hydrostatic supply pump: 0,75 kW - Hydrostatic pump power, X-axis: 0,37 kW - Hydrostatic pump power, Z-axis: 0,37 kW - Power of the crossbeam clamping unit (pump motor): 0,9 kW - Coolant pump capacity: 1,25 kW Connection values: - Connection voltage: 380; 50 Hz, Type of current: three-phase - Total connection value: 240 kVA, required back-up fuse: 400 A EQUIPMENT: - CNC Control: Siemens Sinumerik 840D - Turret head, number of tool holders: 9 (number of tools depending on their arrangement) - Chip conveyor - Documentation There is no guarantee for correctness and completeness of the technical details and accessories. - Subject to prior sale -
Trader Profile: Isabelle Knops
Vermittlung & Handel Von Wzm
Contact Trader
Vermittlung & Handel Von Wzm
Opladener Str. 126
40789 - Monheim am Rhein
Deutschland
+49 (0)2173-4999611">+49 (0)2173-4999611
+49 (0)2173-8546560
isabelle.knops@isabelleknops.com
www.isabelleknops.com
Profile of Trader
Welcome to Isabelle Knops -
Mediation & trade of machine tools.
Active in the mediation and trade of machine tools since 2008.
SELF-EMPLOYED SINCE AUGUST 2015.
RELIABLE IMAGINATIVE CUSTOMER-ORIENTED
Contact
Isabelle Knops
Vermittlung & Handel von Werkzeugmaschinen
Opladener Str. 126
40789 Monheim am Rhein
Germany
E-Mail: isabelle.knops@isabelleknops.com
Telephone number: +49 (0)2173-4999611
Mobile phone number: +49 (0)173-282 0007
Fax: +49 (0)2173-8546560
Lathes have stood the test of time as some of the most efficient and multi-functional tools. They can be used on a wide variety of material surfaces and can serve a huge number of functions. Whether you need a small lathe for home use or an industrial size lathe for large-scale production, you can find the perfect piece of used equipment to suit your needs at LagerMaschinen. Visit this easy-to-use forum to find the best used machinery for your needs.
LagerMaschinen - your home for used machinesLathes are critical pieces of equipment in a wide variety of sectors. A lathe is capable of grinding, cutting and finishing tiny parts for watch- and jewellery-making, as well as large-scale pieces for automobiles and airplanes. Whether you prefer the control offered by a manually operated lathe or the precision and efficiency of a computer numerical controlled (CNC) lathe, you can find a huge selection at LagerMaschinen, your best source for used machinery.
Buying used machines is a smart investmentSmart shoppers know that you dont have to sacrifice quality for affordability when buying machinery for your home or business. Buying used machines is a great way to get the quality you need without straining your budget. If youre in the market for lathes, saws, grinders or any other equipment, you can find a great selection of used machines at LagerMaschinen. Sort results by price, location or brand and find the best used machines around.
TOP Manufacturer:
ZMM - GILDEMEISTER - INDEX - WEILER - MORI SEIKI - HUVEMA - MAZAK - BERNARDO - COLCHESTER - POREBA -
Opladener Str. 126
Contact Trader
Opladener Str. 126
40789 - Monheim am Rhein
Deutschland
+49 (0)2173-4999611
+49 (0)2173-8546560
isabelle.knops@isabelleknops.com
www.isabelleknops.com
Contact person: