MEB Maschinenhandel GmbH - Stockist for used machines

machine measurements -- mm︱machine weight -- kg︱power capacity -- kW︱

---

machine measurements ca. 1.300 x 1.200 x 1.850 mm︱machine weight ca. 600 kg︱power capacity -- kW︱

---

machine measurements ca. 300 x 300 x 3.000 mm︱machine weight -- kg︱power capacity -- kW︱

---

Condition: used Specification: cooling bath - overhauled - modified - bath length: 3.000 mm - dimensions of basin: 300 x 300 x 3.000 mm - material for the basin: stainless - modified guide over the whole cooling section - Production height: 1,100 mm (+/- 100 mm) - NUES stable base frame made of aluminium profile 40 x 40 mm - incl. 1 piece NEW conversion kit designed for one profile 40 x 8 mm Two identical units are available.

machine measurements -- mm︱machine weight 240 kg︱power capacity 1,1 kW︱

---

machine measurements -- mm︱machine weight 1825 kg︱power capacity -- kW︱

---

Condition: used, unused Specification: Coating machine for adhesion promoter The automatic coating machine is suitable to coat metal and plastic parts parts with bonding agent or similar and to dry or warm up these parts to dry or heat up these parts for the following process. - intermittent conveyor chain - automatic coating - with subsequent drying - exchangeable adapters to hold the parts on the chain Technical data: - Year of manufacture: 2019 as new, no production, only test run - heating temperature max.: 150°C - Mains voltage: 3x 400V, 50Hz - Supply voltage: 230V, 50Hz - Control voltage: 24V - Compressed air: 6 bar - Weight: 1,850 kg

machine measurements 940 x 630 x 1.422 mm︱machine weight 682 kg︱power capacity -- kW︱

---

Condition: used, Specification: drum blast machine - dimensions W/D/H: 940 x 630 x 1.422 mm - working area: 2.400 x 3.000 mm - weight approx.: 682 kg - Media Plastic cryogenic: 0.38, 0.5; 0.76; 1.14; 1.52 mm - Compressed air: 5.5 - 6.9 bar 80 - 100 PSI - Working range up to approx.: -130°C - Operating voltage: 3x 460V, 60Hz, 60A 3x 380V, 60Hz, 60A - Control voltage: Siemens PLC with programme memory,

machine measurements 3200x1700x2100 mm︱machine weight -- kg︱power capacity -- kW︱

---

Condition: used Specification: Ultrasonic cleaning system type: Fisa 3VSD 150D - ultrasonic cleaning system consisting of: (see description) 1. tub 1 - cleaning agent 2. tub 2 - tap water 3. tub 3 - preservative 4. cleaning area 5. control - Cleaning cycle in tub 1 approx. 10-20 minutes - Operating temperature between 70-75°C - Extraction ON during cleaning process (Extraction fans are not are not included in the scope of delivery. - Cleaning with water in tub 2 - Cycle time in tub 2 approx. 10-20 minutes - Preservation in tub 3 - Preservation cycle time in tub 3 approx. 10 minutes - Blowing off the parts in the cleaning area under suction - incl. two cleaning baskets - The motors for the suction system in tub 1 and in the cleaning area are not included in the scope of delivery.

machine measurements 1.300 x 1.600 x 440 mm︱machine weight - kg︱power capacity ca. 2 kW︱

---

machine measurements 1.300 x 1.600 x 440 mm︱machine weight - kg︱power capacity ca. 2 kW︱

---

machine measurements -- mm︱machine weight -- kg︱power capacity 1,1 kW︱

---

machine measurements 2.900 x 700 x 1.700 mm︱machine weight 400 kg︱power capacity 2,5 kW︱

---

machine measurements 1800 x 2300 x 2300 mm︱machine weight 1800 kg︱power capacity -- kW︱

---

Condition: used, Specification: drum blasting unit - filling capacity: approx. 90 litres, approx. 1/3 filling with components possible. - dimensions W/D/H: 1.800 x 2.300 x 2.300 mm - Weight approx.: 1,800 kg - Granulate filling: approx. 30 kg - Compressed air: 4-6 bar - Working range down to approx.: -60°C - Operating voltage: 400V, 50Hz, 25A - Control voltage: 24 VDC,

machine measurements 2.900 x 6.300 x 3.300 mm︱machine weight 3.500 kg︱power capacity 9,7 kW︱

---

Condition: used, very good condition Specification: Cryogenic drum deburring - Operating hours: 11,499 hours - welded stainless steel cell - insulation: 120 mm PU foam insulation - batch volume up to: 300 litres - drum volume: 540 litres - Drum speed: 5 - 60 rpm - Temperature control: PID controller down to -150°C - Feeding: swivelling conveyor belt - Dedusting: integrated, insulated cyclone deduster with maintenance flap - Control: Siemens S7-1500 with KP900 Comfort key panel incl. barcode reader - Process documentation: Data management via LAN and/or USB - Article memory: 4.000 pieces - Dimensions W/D/H: 2,900 x 6,300 x 3,300 mm - Weight approx.: 3,500 kg - Heating capacity: 9.7 kW - Electrical connection: 3x400/230/24V, 50Hz/N/PE, 50A - Nitrogen connection: 1/2", 4.5 bar,

machine measurements 2.000 x 1.300 x 1.800 mm︱machine weight 1.500 kg︱power capacity ca. 2,2 kW︱

---

machine measurements H/B/T 630x418x325 mm︱machine weight 30,3 kg︱power capacity 240V, 50/60 Hz, 0,1 kW︱

---

machine measurements 3.000 x 700 x 2.000 mm︱machine weight 250 kg︱power capacity 0,37 kW︱

---

condition: used, very good condition Specification: pneumatic discharge conveyor used - discharge length approx. max.: 2.000 mm - strip width approx.: 150 mm - material direction: from right to left - Drop in running direction: left - Sump tray: 3,000 x 250 mm - bundling stations: 3 pieces - 17 air nozzles, individually adjustable - Compressed air reservoir under the installation - Measuring rail: 2.000 mm - Working height adjustable: 1,250 +/- mm - mobile version - Infeed speed: adjustable - Motor power: 0,37 kW - voltage: 1x 230 V, 50 Hz - Control: Epis - compressed air: 6 bar - Operating instructions and CE conformity available - Dimensions W/L/H: approx. 700 x 3000 x 2000 mm - Weight approx.: 250 kg

machine measurements -- mm︱machine weight -- kg︱power capacity -- kW︱

---

Condition: used Specification: dosing unit type SiloStar 922 A - second-hand - for dosing liquid silicone LS - container: 20 litre hobbocks and 200 litre drums - Power connection: 400V, 50Hz Equipment of the plant with: - Fardoser SPS P1 - Mixer / material pressure regulator cooled with outlet valve - roll-in device - Pressure and material shortage protection - Machine connection outlet valve and pressure regulator - Pressure vessel Colour

machine measurements -- mm︱machine weight -- kg︱power capacity 189 kW︱

---

Condition: used Specification: convection oven - Air circulation oven type ELIOG Kelvitherm / KUV 250/25-25-25, technical data: - inner dimensions: 2.500 x 2.500 x 2.500 mm - Temperature: max. 250°C - Temperature adjustable via programme controller - Door: single-leaf door - Electrical heating: 189 KW - Control system: EUROTHERM - with CE - Weight approx.: 3000 kg

machine measurements 2400x1900x2400 mm︱machine weight 1600 kg︱power capacity -- kW︱

---

Condition: used Specification: Heating furnace - Heating furnace type RV 32/S, Technical data: - Interior dimensions: 1.250 x 1.500 x 1.900 mm - room volume approx.: 3,23 m³ - Temperature max.: 50 - 200°C - Temperature adjustable via programme controller - Door: single-leaf door - Electrical heating: 24 kW - Motors: 0,74 kW - Voltage: 3x 400V, 50 Hz - Dimensions L/W/H approx.: 2,400 x 1,900 x 2,400 mm - Weight approx.: 1600 kg Three identical units are available.

machine measurements 1500 x 2400 x 1150 mm︱machine weight -- kg︱power capacity 12 kW︱

---

machine measurements -- mm︱machine weight -- kg︱power capacity -- kW︱

---

Condition: used Specification: dosing unit - second-hand - container: 20 litre hobbocks - pneumatic connection: R 1/4" - approx. 8 bar - max. operating pressure: 300 bar - power connection: 400V, 50Hz, 16A - Max. material volume flow: 2.14 l/min - max. material temperature: 60°C - mobile

machine measurements -- mm︱machine weight -- kg︱power capacity -- kW︱

---

Condition: used, Specification: drum-type blast deburring machine type: MEWO Rotor TS 60 - batch volume approx.: 1-100 litres, - working temperature: - 150°C - drum speed: 5 - 30 rpm - Blast wheel speed: 1,000 - 9,500 rpm - Control: Siemens S7 Simatic

machine measurements -- mm︱machine weight 1.500 kg︱power capacity 30 kW︱

---

Condition: used, Specification: shredder/Shredding plant with two shredders type: WLK 6 S / 30 V-rotor Weima low and slow speed rotor, and second shredder make: AMIS complete plant ready for operation, incl. hopper with lid and platform. Special accessories: - automatic star-delta start-up - gear motor with transport screw - lid with limit switch - quick-change sieve - Hopper can be lifted manually - Equipment for underfloor installation consisting of hopper elevation, guard rail, external emergency stop WLK version with sound insulation, sound-insulated lid and front door Technical data: - Hopper volume: 0.9 m³ - Operating voltage: 3x 400 V - Motor power main drive: 30 kW, 1,500 rpm - Motor power hydraulics: 1.5 / 2.0 kW, 1,500/3,000 rpm - Weight approx.: 1,500 kg - Number of tools: 42 pieces (2 cutter shafts) - Rotor speed approx.: 90 rpm - Rotor diameter: 368 mm - Hydraulic oil approx.: 20 litres - Fuse protection: 80 A - Power consumption: 70 A - Inlet cross-section: Length: 1,000 mm Width: 800 mm Suction nozzle: 200 mm Documentation in German, consisting of: - entire folder with documentation available - circuit diagram: Electrical and hydraulic diagram Platform with ladder and handrail Second small shredder Make: AMIS - Installation: under the stage, under the large shredder WLK 6S, for the possibility to further reduce the to further reduce the size of the granulate in a second processing step. - Type: SMS 30/50-H5- - Year of manufacture: 1999 - Engine power: 22 kW

machine measurements 850 x 1.800 x 1.450 mm︱machine weight 360 kg︱power capacity 0,7 kW︱

---

Condition: new Specification: Powder coating machine, type: EPC-30/2E The machine is designed for the powder coating of cables, hoses and profiles. - Product diameter max.: 30 mm - Product speed max.: 1,500 m/min - Powder throughput min.: 30 g/min with fine dosage - Powder throughput max.: 400 g/min per powder injector - Electrostatic: available as option - Connected load: 0.7 kW - Dimensions LxHxW: 850 x 1,800 x 1,450 mm - Weight approx.: 360 kg