European network of stockholding machinery dealers

Bitte einen Suchbegriff eingeben - Please enter a search term
Category:
    Manufacturer:
      Machines:
        Trader:

          Heinz Sanders GmbH Maschinen - Werkzeuge - Schweisstechnik - Stockist for used machines

          Machinelist:


          Machining centre

          used  Machining centre HWACHEON VESTA 1000


          • Heinz Sanders GmbH
          • Fresenburger Weg 4
          • 49779 Niederlangen
          • Deutschland

          • +49 (0) 5939 9406 40
            +49 (0) 5939 9406 50
          • maschinen@heinz-sanders.de
            www.heinz-sanders.de
          #1125-7194 · Machining centre

          HWACHEON - VESTA 1000 - - 2016 -

          Technical details
          x-travel 1000 mm︱y-travel 550 mm︱z-travel 500 mm︱control Siemens828D ︱rapid speed 36/36/30 m/min︱feed speeds 24000 mm/min︱table surface area 1100 x 502 mm︱turning speed range 12000 U/min︱no. of tools in the magazine 24 Stück︱tool taper BT 40 ︱weight of the machine ca. 6,5 t︱
          - Commissioning: January 2017! - with Siemens828D including Shopmill - Flat top chip conveyor - Spindle with 12,000 rpm, SK 40 - Internal coolant supply up to 30 bar - Tool magazine with 24 places
            x-travel 1000 mm
            y-travel 550 mm
            z-travel 500 mm
            control Siemens828D
            rapid speed 36/36/30 m/min
            feed speeds 24000 mm/min
            table surface area 1100 x 502 mm
            turning speed range 12000 U/min
            no. of tools in the magazine 24 Stück
            tool taper BT 40
            weight of the machine ca. 6,5 t
            Description :
            - Commissioning: January 2017!
            - with Siemens828D including Shopmill
            - Flat top chip conveyor
            - Spindle with 12,000 rpm, SK 40
            - Internal coolant supply up to 30 bar
            - Tool magazine with 24 places
          Datasheet
          Request / Contact
          used  Machining centre HEDELIUS - Vertikal CB 70


          • Heinz Sanders GmbH
          • Fresenburger Weg 4
          • 49779 Niederlangen
          • Deutschland

          • +49 (0) 5939 9406 40
            +49 (0) 5939 9406 50
          • maschinen@heinz-sanders.de
            www.heinz-sanders.de
          #1125-3140032 · Machining centre

          HEDELIUS - Vertikal - CB 70 - - 2001 -

          Technical details
          x-travel 2100 mm︱y-travel 720 mm︱z-travel 600 mm︱spindle taper SK 40 ︱turning speeds 30 - 8000 U/min︱no. of workpieces in the magazine 30 Stück︱table surface area 2800 x 650 mm︱table load 2500 kg︱table height over floor 900 mm︱rapid travel x/y/z 30 m/min︱feed speeds X/Y/Z 0 / 30000 mm/min︱total power requirement 25 kW︱weight of the machine ca. 12000 kg︱dimensions of the machine ca. 5500 x 3400 x 3100 mm︱
          CNC traveling column machining center Hedelius Furnishing: - HEIDENHAIN control TNC426 - chip conveyor - Coolant system 350 / 2.5 bar - Working area hood Machining values: - max. milling capacity: 600cm³/min - max. drilling Ø: 44 mm - max. thread Ø: M30 operating hours: - control on = 68283 hours - machine on = 67782 hours - program run = 20891 hours
            x-travel 2100 mm
            y-travel 720 mm
            z-travel 600 mm
            spindle taper SK 40
            turning speeds 30 - 8000 U/min
            no. of workpieces in the magazin. 30 Stück
            table surface area 2800 x 650 mm
            table load 2500 kg
            table height over floor 900 mm
            rapid travel x/y/z 30 m/min
            feed speeds X/Y/Z 0 / 30000 mm/min
            total power requirement 25 kW
            weight of the machine ca. 12000 kg
            dimensions of the machine ca. 5500 x 3400 x 3100 mm
            Description :
            CNC traveling column machining center Hedelius

            Furnishing:
            - HEIDENHAIN control TNC426
            - chip conveyor
            - Coolant system 350 / 2.5 bar
            - Working area hood

            Machining values:
            - max. milling capacity: 600cm³/min
            - max. drilling Ø: 44 mm
            - max. thread Ø: M30

            operating hours:
            - control on = 68283 hours
            - machine on = 67782 hours
            - program run = 20891 hours
          Datasheet
          Request / Contact
          used  Machining centre ELUMATEC Stabbearbeitung SBZ 130/01


          • Heinz Sanders GmbH
          • Fresenburger Weg 4
          • 49779 Niederlangen
          • Deutschland

          • +49 (0) 5939 9406 40
            +49 (0) 5939 9406 50
          • maschinen@heinz-sanders.de
            www.heinz-sanders.de
          #1125-3500061 · Machining centre

          ELUMATEC Stabbearbeitung - SBZ 130/01 - - 1999 -

          Technical details
          x-axis 6450 mm︱y-axis 400 mm︱z-axis 380 mm︱working lenght 6500 mm︱Number of tools 8 St.︱tool taper BT30 ︱tool changing time 1,2 sec︱diameter of tools max. 80 mm︱turning speeds 6000 U/min︱Feed speed X = 34 m/min.︱Feed speed Y+Z = 18 m/min.︱total power requirement 8,5 kW︱dimensions 9800 x 3000 x 2400/3300 mm︱weight 5400 kg︱
          *Bar machining center, 3-axis machining of aluminum, plastic, steel and stainless steel profiles*
            x-axis 6450 mm
            y-axis 400 mm
            z-axis 380 mm
            working lenght 6500 mm
            Number of tools 8 St.
            tool taper BT30
            tool changing time 1,2 sec
            diameter of tools max. 80 mm
            turning speeds 6000 U/min
            Feed speed X = 34 m/min.
            Feed speed Y+Z = 18 m/min.
            total power requirement 8,5 kW
            dimensions 9800 x 3000 x 2400/3300 mm
            weight 5400 kg
            Description :
            *Bar machining center, 3-axis machining of aluminum, plastic, steel
            and stainless steel profiles*
          Datasheet
          Request / Contact

          Universal Milling Machine

          used  Universal Milling Machine MIKRON WF3DP


          • Heinz Sanders GmbH
          • Fresenburger Weg 4
          • 49779 Niederlangen
          • Deutschland

          • +49 (0) 5939 9406 40
            +49 (0) 5939 9406 50
          • maschinen@heinz-sanders.de
            www.heinz-sanders.de
          #1125-3130017 · Universal Milling Machine

          MIKRON - WF3DP - - unbekannt -

          Technical details
          x-travel 540 mm︱y-travel 415 mm︱z-travel 540 mm︱speeds 30 - 2240 U/min︱table surface area 450 x 800 mm︱tool taper ISO 40 ︱total power requirement 7,8 kW︱weight of the machine ca. 1800 kg︱dimensions of the machine ca. 2100 x 1900 x 2000 mm︱
          - HEIDENHAIN TNC 121 control - 90° swiveling vertical milling head - Angle table 350 x 800 mm - Cooling device - Machine light - Machine vice - Tools/Accessories
            x-travel 540 mm
            y-travel 415 mm
            z-travel 540 mm
            speeds 30 - 2240 U/min
            table surface area 450 x 800 mm
            tool taper ISO 40
            total power requirement 7,8 kW
            weight of the machine ca. 1800 kg
            dimensions of the machine ca. 2100 x 1900 x 2000 mm
            Description :
            - HEIDENHAIN TNC 121 control
            - 90° swiveling vertical milling head
            - Angle table 350 x 800 mm
            - Cooling device
            - Machine light
            - Machine vice
            - Tools/Accessories
          Datasheet
          Request / Contact
          used  Universal Milling Machine OPTIMUM OPTImill F 310HSC


          • Heinz Sanders GmbH
          • Fresenburger Weg 4
          • 49779 Niederlangen
          • Deutschland

          • +49 (0) 5939 9406 40
            +49 (0) 5939 9406 50
          • maschinen@heinz-sanders.de
            www.heinz-sanders.de
          #1125-2140001 · Universal Milling Machine

          OPTIMUM - OPTImill F 310HSC - - 2021 (NEU) - Sinumerik Steuerung 828D

          Technical details
          x-travel 1050 mm︱y-travel 600 mm︱z-travel 600 mm︱table-size 1200 x 600 mm︱tool adaptor SK 40 ︱turning speed range 12000 U/min︱power requirement 40 kW︱Control Sinumerik Steuerung 828D ︱rapid traverse Z-axis 30000 mm/min︱rapid traverse X- and Y-axis 30000 mm/min︱workpiece weight 800 kg︱no. of tools in the magazine 30 Stück︱dimensions 4319 x 2286 x 2928 mm︱weight of the machine ca. 7000 kg︱
          ** immediately available from stock - Siemens Sinumerik control 828D with 15.6 inch touch display - Difficult execution - High productivity - High reliability - Heavily ribbed, torsion-free machine base - Profile rail with revolving rollers on all axes for high loads - High torque servo drives, direct to the ball screw in all three axes - Precision-ground, preloaded, heavy-duty ball screw (Ø 40 mm x P16 x C3) for high rapid traverse speeds in all axes - Telescopic guideway cover on all three axes - Main spindle SK40 up to 10,000 rpm with belt drive or up to 12,000 rpm with inline spindle - Massive, precise milling table with four T-slots, large dimensions and precision ground - The portable, electronic handwheel with enabling button and emergency stop The impact switch makes it much easier to run in programs - Tool changer double arm gripper with 30 tool places - Coolant system with 520 liter coolant tank with chip flushing system and cleaning gun - Belt-type chip conveyor ensures efficient chip evacuation - Chip trolley - RJ45 connector, USB and 230 V power supply - Closed control cabinet with integrated heat exchanger ensures optimal temperature and prevents the ingress of dirt particles - Oil separator - Machine light in the work area
            x-travel 1050 mm
            y-travel 600 mm
            z-travel 600 mm
            table-size 1200 x 600 mm
            tool adaptor SK 40
            turning speed range 12000 U/min
            power requirement 40 kW
            Control Sinumerik Steuerung 828D
            rapid traverse Z-axis 30000 mm/min
            rapid traverse X- and Y-axis 30000 mm/min
            workpiece weight 800 kg
            no. of tools in the magazine 30 Stück
            dimensions 4319 x 2286 x 2928 mm
            weight of the machine ca. 7000 kg
            Description :
            ** immediately available from stock

            - Siemens Sinumerik control 828D with 15.6 inch touch display
            - Difficult execution
            - High productivity
            - High reliability
            - Heavily ribbed, torsion-free machine base
            - Profile rail with revolving rollers on all axes for high loads
            - High torque servo drives, direct to the ball screw in all three axes
            - Precision-ground, preloaded, heavy-duty ball screw (Ø 40
            mm x P16 x C3) for high rapid traverse speeds in all axes
            - Telescopic guideway cover on all three axes
            - Main spindle SK40 up to 10,000 rpm with belt drive or up to 12,000 rpm
            with inline spindle
            - Massive, precise milling table with four T-slots, large dimensions and
            precision ground
            - The portable, electronic handwheel with enabling button and emergency stop
            The impact switch makes it much easier to run in programs
            - Tool changer double arm gripper with 30 tool places
            - Coolant system with 520 liter coolant tank with chip flushing system and
            cleaning gun
            - Belt-type chip conveyor ensures efficient chip evacuation
            - Chip trolley
            - RJ45 connector, USB and 230 V power supply
            - Closed control cabinet with integrated heat exchanger ensures optimal
            temperature and prevents the ingress of dirt particles
            - Oil separator
            - Machine light in the work area
          Datasheet
          Request / Contact
          used  Universal Milling Machine KLOPP-KORRADI FWUE 8/ TNC 124


          • Heinz Sanders GmbH
          • Fresenburger Weg 4
          • 49779 Niederlangen
          • Deutschland

          • +49 (0) 5939 9406 40
            +49 (0) 5939 9406 50
          • maschinen@heinz-sanders.de
            www.heinz-sanders.de
          #1125-3130026 · Universal Milling Machine

          KLOPP-KORRADI - FWUE 8/ TNC 124 - - 2007 - HEIDENHAIN TNC 124

          Technical details
          x-travel 480/500 mm︱y-travel 230/250 mm︱z-travel 380/400 mm︱speeds 45 - 2240 U/min︱table surface area 1000 x 250 mm︱tool taper SK 40 ︱control HEIDENHAIN TNC 124 ︱total power requirement 3 kW︱weight of the machine ca. 1550 kg︱dimensions of the machine ca. 2600 x 2200 x 1800 mm︱
          - horizontal + vertical milling spindle - Cooling device - swiveling table - Chip tray - Feed X/Y/Z - axis infinitely adjustable 8-1680 mm/min - Rapid traverse X/Y/Z - axis 4000 mm/min - Control HEIDENHAIN TNC 124 - Operating hours: 4764 hours - Machine light - Machine feet - Operation manual
            x-travel 480/500 mm
            y-travel 230/250 mm
            z-travel 380/400 mm
            speeds 45 - 2240 U/min
            table surface area 1000 x 250 mm
            tool taper SK 40
            control HEIDENHAIN TNC 124
            total power requirement 3 kW
            weight of the machine ca. 1550 kg
            dimensions of the machine ca. 2600 x 2200 x 1800 mm
            Description :
            - horizontal + vertical milling spindle
            - Cooling device
            - swiveling table
            - Chip tray
            - Feed X/Y/Z - axis infinitely adjustable 8-1680 mm/min
            - Rapid traverse X/Y/Z - axis 4000 mm/min
            - Control HEIDENHAIN TNC 124
            - Operating hours: 4764 hours
            - Machine light
            - Machine feet
            - Operation manual
          Datasheet
          Request / Contact
          used  Universal Milling Machine LAGUN GUM 152


          • Heinz Sanders GmbH
          • Fresenburger Weg 4
          • 49779 Niederlangen
          • Deutschland

          • +49 (0) 5939 9406 40
            +49 (0) 5939 9406 50
          • maschinen@heinz-sanders.de
            www.heinz-sanders.de
          #1125-3130025 · Universal Milling Machine

          LAGUN - GUM 152 - - 2002 -

          Technical details
          x-travel 1050 mm︱y-travel 330 mm︱z-travel 475 mm︱speeds 35 - 1800 U/min︱table surface area 1525 x 325 mm︱number of feeds 12 ︱feed - longitudinal/cross 20 - 920 mm/min︱feeds vertical 6 - 276 mm/min︱tool taper ISO 40 ︱total power requirement 5,5 kW︱weight of the machine ca. 2700 kg︱dimensions of the machine ca. 2,5 x 2,5 x 2,2 m︱
          - robust / conventional universal milling machine - Stable T-slot clamping table - Infinitely variable speed - Digital display
            x-travel 1050 mm
            y-travel 330 mm
            z-travel 475 mm
            speeds 35 - 1800 U/min
            table surface area 1525 x 325 mm
            number of feeds 12
            feed - longitudinal/cross 20 - 920 mm/min
            feeds vertical 6 - 276 mm/min
            tool taper ISO 40
            total power requirement 5,5 kW
            weight of the machine ca. 2700 kg
            dimensions of the machine ca. 2,5 x 2,5 x 2,2 m
            Description :
            - robust / conventional universal milling machine
            - Stable T-slot clamping table
            - Infinitely variable speed
            - Digital display
          Datasheet
          Request / Contact
          used  Universal Milling Machine EMCO FB 4


          • Heinz Sanders GmbH
          • Fresenburger Weg 4
          • 49779 Niederlangen
          • Deutschland

          • +49 (0) 5939 9406 40
            +49 (0) 5939 9406 50
          • maschinen@heinz-sanders.de
            www.heinz-sanders.de
          #1125-3130028 · Universal Milling Machine

          EMCO - FB 4 - - 2002 -

          Technical details
          x-travel 450 mm︱y-travel 300 mm︱z-travel 350 mm︱speeds 63 - 3150 U/min︱table surface area 800 x 400 mm︱tool taper SK 40 ︱number of feeds 18 ︱feed - longitudinal/cross 16 - 800 mm/min︱feeds vertical 8 - 400 mm/min︱rapid traverse Z = 1200 mM/min︱rapid traverse X / Y = 2400 mm/min︱total power requirement 3,2 kW︱weight of the machine ca. 1,6 kg︱dimensions of the machine ca. 1,5 x 1,5 x1,68 m︱
          - 3-axis digital display - Rigid angle table - Control panel - Coolant device - Automatic central lubrication - All-round protection, foldable - chip tray - Machine light
            x-travel 450 mm
            y-travel 300 mm
            z-travel 350 mm
            speeds 63 - 3150 U/min
            table surface area 800 x 400 mm
            tool taper SK 40
            number of feeds 18
            feed - longitudinal/cross 16 - 800 mm/min
            feeds vertical 8 - 400 mm/min
            rapid traverse Z = 1200 mM/min
            rapid traverse X / Y = 2400 mm/min
            total power requirement 3,2 kW
            weight of the machine ca. 1,6 kg
            dimensions of the machine ca. 1,5 x 1,5 x1,68 m
            Description :
            - 3-axis digital display
            - Rigid angle table
            - Control panel
            - Coolant device
            - Automatic central lubrication
            - All-round protection, foldable
            - chip tray
            - Machine light
          Datasheet
          Request / Contact
          used  Universal Milling Machine HAFFNER - Kopierfräse BF 365


          • Heinz Sanders GmbH
          • Fresenburger Weg 4
          • 49779 Niederlangen
          • Deutschland

          • +49 (0) 5939 9406 40
            +49 (0) 5939 9406 50
          • maschinen@heinz-sanders.de
            www.heinz-sanders.de
          #1125-3130019 · Universal Milling Machine

          HAFFNER - Kopierfräse - BF 365 - - 1995 -

          Technical details
          x-travel 300 mm︱y-travel 120 mm︱z-travel 120 mm︱clamping range 190 x 160 mm︱Required air-pressure 6 bar︱distance spindle /table 21,5 mm︱turning speeds 12000 U/min︱total power requirement 1,1 kW︱weight of the machine ca. 95 kg︱dimensions of the machine ca. 700x900x1600 mm︱
          Copy router BF 365 with automatic switching - Pneumatic clamping device - Automatic shifting - Centering device with scale - Milling area 300x120 mm - Stroke 120mm
            x-travel 300 mm
            y-travel 120 mm
            z-travel 120 mm
            clamping range 190 x 160 mm
            Required air-pressure 6 bar
            distance spindle /table 21,5 mm
            turning speeds 12000 U/min
            total power requirement 1,1 kW
            weight of the machine ca. 95 kg
            dimensions of the machine ca. 700x900x1600 mm
            Description :
            Copy router BF 365 with automatic switching
            - Pneumatic clamping device
            - Automatic shifting
            - Centering device with scale

            - Milling area 300x120 mm
            - Stroke 120mm
          Datasheet
          Request / Contact
          used  Universal Milling Machine HURON MU 6


          • Heinz Sanders GmbH
          • Fresenburger Weg 4
          • 49779 Niederlangen
          • Deutschland

          • +49 (0) 5939 9406 40
            +49 (0) 5939 9406 50
          • maschinen@heinz-sanders.de
            www.heinz-sanders.de
          #1125-3130029 · Universal Milling Machine

          HURON - MU 6 - - 1988 -

          Technical details
          x-travel 1500 mm︱y-travel 700 mm︱z-travel 550 mm︱table-size 2000 x 460 mm︱tool adaptor ISO 50 ︱speeds 27 U/min︱turning speed range 30 - 2066 U/min︱feed speeds X / Y 800 mm/min︱feed speeds Z 400 mm/min︱total power requirement 2,8 m/min︱feed - longitudinal/cross 11 kW︱feeds vertical 3900 kg︱rapid traverse longitudinal and cross 2500 x 2350 x 2150 mm︱
          Accesories: - Coolant device - Digital display - automatic Central lubrication - Heidenhain retraction control - automatic Tool clamping - Machine light - Operation manual
            x-travel 1500 mm
            y-travel 700 mm
            z-travel 550 mm
            table-size 2000 x 460 mm
            tool adaptor ISO 50
            speeds 27 U/min
            turning speed range 30 - 2066 U/min
            feed speeds X / Y 800 mm/min
            feed speeds Z 400 mm/min
            total power requirement 2,8 m/min
            feed - longitudinal/cross 11 kW
            feeds vertical 3900 kg
            rapid traverse longitudinal and . 2500 x 2350 x 2150 mm
            Description :
            Accesories:
            - Coolant device
            - Digital display
            - automatic Central lubrication
            - Heidenhain retraction control
            - automatic Tool clamping
            - Machine light
            - Operation manual
          Datasheet
          Request / Contact
          used  Universal Milling Machine HERMLE UWF 700


          • Heinz Sanders GmbH
          • Fresenburger Weg 4
          • 49779 Niederlangen
          • Deutschland

          • +49 (0) 5939 9406 40
            +49 (0) 5939 9406 50
          • maschinen@heinz-sanders.de
            www.heinz-sanders.de
          #1125-3151 · Universal Milling Machine

          HERMLE - UWF 700 - - 1984 -

          Technical details
          x-travel 410 mm︱y-travel 310 mm︱z-travel 400 mm︱tool taper ISO 40 ︱spindle turning speed range 40 - 2000 U/min︱table-size 700 x 280 mm︱surface area 830 x 224 mm︱total power requirement 2,2 kW︱dimensions of the machine ca. 1,4 x 2,1 x 2,0 m︱Control Heidenhain TNC 145
            x-travel 410 mm
            y-travel 310 mm
            z-travel 400 mm
            tool taper ISO 40
            spindle turning speed range 40 - 2000 U/min
            table-size 700 x 280 mm
            surface area 830 x 224 mm
            total power requirement 2,2 kW
            dimensions of the machine ca. 1,4 x 2,1 x 2,0 m
            Control Heidenhain TNC 145
            Description :

          Datasheet
          Request / Contact

          Belt Grinding Machine

          used  Belt Grinding Machine METALLKRAFT MBSM 150-240-2


          • Heinz Sanders GmbH
          • Fresenburger Weg 4
          • 49779 Niederlangen
          • Deutschland

          • +49 (0) 5939 9406 40
            +49 (0) 5939 9406 50
          • maschinen@heinz-sanders.de
            www.heinz-sanders.de
          #1125-3923315 · Belt Grinding Machine

          METALLKRAFT - MBSM 150-240-2 - - NEU -

          Technical details
          width of the strips 150 mm︱band length 2000 mm︱band speed 18 / 36 m/min︱total power requirement 3/4 kW︱weight of the machine ca. 0,1 t︱dimensions of the machine ca. 1,0 x 0,57 x 1,15 m︱
            width of the strips 150 mm
            band length 2000 mm
            band speed 18 / 36 m/min
            total power requirement 3/4 kW
            weight of the machine ca. 0,1 t
            dimensions of the machine ca. 1,0 x 0,57 x 1,15 m
          Datasheet
          Request / Contact
          used  Belt Grinding Machine BERNARDO MS 150 x 2000 S


          • Heinz Sanders GmbH
          • Fresenburger Weg 4
          • 49779 Niederlangen
          • Deutschland

          • +49 (0) 5939 9406 40
            +49 (0) 5939 9406 50
          • maschinen@heinz-sanders.de
            www.heinz-sanders.de
          #1125-2230004 · Belt Grinding Machine

          BERNARDO - MS 150 x 2000 S - - NEU -

          Technical details
          width of the strips 150 mm︱band length 2000 mm︱band speed 14,5 / 29 m/sek︱grinding width 460 x 150 Plantisch mm︱Dust suction hood 100 mm︱total power requirement 4,0 kW 100% ED︱weight of the machine ca. 84,0 kg︱
          Description : - Good sanding performance due to high belt speed - Quick adjustment for horizontal and inclined position - Continuous flat grinding surface for optimal grinding of long workpieces - Constant belt tension through spring-loaded tensioning device - Universally applicable for grinding edges, surfaces and for cylindrical grinding - Including quick-release system for quick strap changes - Simple adjustment of the parallel belt run by means of an adjusting screw - Graphite coating on the flat grinding surface increases the sliding properties of the sanding belt Scope of delivery : - Sanding belt K 80 - Hinged protective screen - Sanding and support table - workpiece stop - Dust extraction nozzle - Separate off button - underframe
            width of the strips 150 mm
            band length 2000 mm
            band speed 14,5 / 29 m/sek
            grinding width 460 x 150 Plantisch mm
            Dust suction hood 100 mm
            total power requirement 4,0 kW 100% ED
            weight of the machine ca. 84,0 kg
            Description :
            Description :
            - Good sanding performance due to high belt speed
            - Quick adjustment for horizontal and inclined position
            - Continuous flat grinding surface for optimal grinding of long workpieces
            - Constant belt tension through spring-loaded tensioning device
            - Universally applicable for grinding edges, surfaces and for cylindrical
            grinding
            - Including quick-release system for quick strap changes
            - Simple adjustment of the parallel belt run by means of an adjusting screw
            - Graphite coating on the flat grinding surface increases the sliding
            properties of the sanding belt

            Scope of delivery :
            - Sanding belt K 80
            - Hinged protective screen
            - Sanding and support table
            - workpiece stop
            - Dust extraction nozzle
            - Separate off button
            - underframe
          Datasheet
          Request / Contact
          used  Belt Grinding Machine FALKEN FALKEN R 1


          • Heinz Sanders GmbH
          • Fresenburger Weg 4
          • 49779 Niederlangen
          • Deutschland

          • +49 (0) 5939 9406 40
            +49 (0) 5939 9406 50
          • maschinen@heinz-sanders.de
            www.heinz-sanders.de
          #1125-7188 · Belt Grinding Machine

          FALKEN - FALKEN R 1 - - NEU -

          Technical details
          width of the strips 150 mm︱band length 2280 mm︱band speed 22 m/sec︱table-size 700 x 350 mm︱roll diameter 140 / 80 mm︱motor speeds: 2880 1/min︱range L-W-H 1300 x 800 x 1500 mm︱total power requirement 3,0 kW︱weight of the machine ca. 250 kg︱
          Horizontal belt grinder - Small, flexible all-rounder - Solid gray cast iron unit - long-lasting, good grinding results - Motorized tape oscillation approx. 10mm - Pneumatic belt tension - Small table on the pulley for grinding radii and shapes - The entire sanding belt can be used thanks to the height-adjustable work table - Including angle and miter fence Special equipment: - swiveling grinding unit 90 - 135 degrees - Support table on the pulley
            width of the strips 150 mm
            band length 2280 mm
            band speed 22 m/sec
            table-size 700 x 350 mm
            roll diameter 140 / 80 mm
            motor speeds: 2880 1/min
            range L-W-H 1300 x 800 x 1500 mm
            total power requirement 3,0 kW
            weight of the machine ca. 250 kg
            Description :
            Horizontal belt grinder

            - Small, flexible all-rounder
            - Solid gray cast iron unit - long-lasting, good grinding results
            - Motorized tape oscillation approx. 10mm
            - Pneumatic belt tension
            - Small table on the pulley for grinding radii and shapes
            - The entire sanding belt can be used thanks to the height-adjustable work table
            - Including angle and miter fence

            Special equipment:
            - swiveling grinding unit 90 - 135 degrees
            - Support table on the pulley
          Datasheet
          Request / Contact
          used  Belt Grinding Machine NKO PASOVEC 75/2


          • Heinz Sanders GmbH
          • Fresenburger Weg 4
          • 49779 Niederlangen
          • Deutschland

          • +49 (0) 5939 9406 40
            +49 (0) 5939 9406 50
          • maschinen@heinz-sanders.de
            www.heinz-sanders.de
          #1125-2230008 · Belt Grinding Machine

          NKO - PASOVEC 75/2 - - NEU -

          Technical details
          width of the strips 75 mm︱band length 2000 mm︱band speed 29 / 14,5 m/s︱total power requirement 3,0 kW︱weight of the machine ca. 72 kg︱dimensions of the machine ca. 533x967x1069 mm︱
          for efficient and at the same time economical sanding of surfaces and edges and rounding parts made of carbon, stainless steel, aluminum and others non-ferrous metals such as wood and plastic. Contact wheel diameter: 200 mm Nominal diameter of the extraction socket outside: 100 mm Sound pressure level: 87 dBA - Number of speeds: 2-speed - 1 pc sanding belt 75 x 2000 mm grit 80
            width of the strips 75 mm
            band length 2000 mm
            band speed 29 / 14,5 m/s
            total power requirement 3,0 kW
            weight of the machine ca. 72 kg
            dimensions of the machine ca. 533x967x1069 mm
            Description :
            for efficient and at the same time economical sanding of surfaces and edges
            and rounding parts made of carbon, stainless steel, aluminum and others
            non-ferrous metals such as wood and plastic.

            Contact wheel diameter: 200 mm
            Nominal diameter of the extraction socket outside: 100 mm
            Sound pressure level: 87 dBA

            - Number of speeds: 2-speed
            - 1 pc sanding belt 75 x 2000 mm grit 80
          Datasheet
          Request / Contact
          used  Belt Grinding Machine NKO PASOVEC 150/2


          • Heinz Sanders GmbH
          • Fresenburger Weg 4
          • 49779 Niederlangen
          • Deutschland

          • +49 (0) 5939 9406 40
            +49 (0) 5939 9406 50
          • maschinen@heinz-sanders.de
            www.heinz-sanders.de
          #1125-2230009 · Belt Grinding Machine

          NKO - PASOVEC 150/2 - - NEU -

          Technical details
          width of the strips 150 mm︱band length 2000 mm︱band speed 29 / 14,5 m/s︱total power requirement 3,0 kW︱weight of the machine ca. 90 kg︱dimensions of the machine ca. 421x967x1069 mm︱
          for efficient and at the same time economical sanding of surfaces and edges and rounding parts made of carbon, stainless steel, aluminum and others non-ferrous metals such as wood and plastic. Contact wheel diameter: 200 mm Nominal diameter of the extraction socket outside: 100 mm Sound pressure level: 87 dBA - Number of speeds: 2-speed - 1 pc sanding belt 150 x 2000 mm grit 80
            width of the strips 150 mm
            band length 2000 mm
            band speed 29 / 14,5 m/s
            total power requirement 3,0 kW
            weight of the machine ca. 90 kg
            dimensions of the machine ca. 421x967x1069 mm
            Description :
            for efficient and at the same time economical sanding of surfaces and edges
            and rounding parts made of carbon, stainless steel, aluminum and others
            non-ferrous metals such as wood and plastic.

            Contact wheel diameter: 200 mm
            Nominal diameter of the extraction socket outside: 100 mm
            Sound pressure level: 87 dBA

            - Number of speeds: 2-speed
            - 1 pc sanding belt 150 x 2000 mm grit 80
          Datasheet
          Request / Contact
          used  Belt Grinding Machine NKO PASOVEC 75 RUNNER


          • Heinz Sanders GmbH
          • Fresenburger Weg 4
          • 49779 Niederlangen
          • Deutschland

          • +49 (0) 5939 9406 40
            +49 (0) 5939 9406 50
          • maschinen@heinz-sanders.de
            www.heinz-sanders.de
          #1125-2230016 · Belt Grinding Machine

          NKO - PASOVEC 75 RUNNER - - NEU -

          Technical details
          width of the strips 75 mm︱band length 2000 mm︱band speed 30 m/s︱total power requirement 3,0 kW︱weight of the machine ca. 70 kg︱dimensions of the machine ca. 610 x 944 x 1419 mm︱
          Mobile belt sander PASOVEC 75 RUNNER Pasovec 75 RUNNER - the special belt grinder developed for Surface grinding applications, especially for grinding weld seams in the material surface. Pasovec 75 Runner removes unwanted layers that occur when Sheet metal rolling or after sheet metal cutting with plasma or oxygen arise. Innovative, multifunctional machine Stepless adjustment of the grinding depth Equipped with a dead man's switch Station for flat grinding small workpieces Low running costs
            width of the strips 75 mm
            band length 2000 mm
            band speed 30 m/s
            total power requirement 3,0 kW
            weight of the machine ca. 70 kg
            dimensions of the machine ca. 610 x 944 x 1419 mm
            Description :
            Mobile belt sander PASOVEC 75 RUNNER

            Pasovec 75 RUNNER - the special belt grinder developed for
            Surface grinding applications, especially for grinding weld seams in the
            material surface. Pasovec 75 Runner removes unwanted layers that occur when
            Sheet metal rolling or after sheet metal cutting with plasma or
            oxygen arise.

            Innovative, multifunctional machine
            Stepless adjustment of the grinding depth
            Equipped with a dead man's switch
            Station for flat grinding small workpieces
            Low running costs
          Datasheet
          Request / Contact

          Drill Grinding Machine

          used  Drill Grinding Machine SCHANBACHER S3-50


          • Heinz Sanders GmbH
          • Fresenburger Weg 4
          • 49779 Niederlangen
          • Deutschland

          • +49 (0) 5939 9406 40
            +49 (0) 5939 9406 50
          • maschinen@heinz-sanders.de
            www.heinz-sanders.de
          #1125-3230015 · Drill Grinding Machine

          SCHANBACHER - S3-50 - - unbekannt -

          Technical details
          drill diameter 3 - 50 mm︱drilling length 500 mm︱lip angle 90 - 140 °︱weight of the machine ca. 120 kg︱dimensions of the machine ca. 850 x 600 x 1300 mm︱
            drill diameter 3 - 50 mm
            drilling length 500 mm
            lip angle 90 - 140 °
            weight of the machine ca. 120 kg
            dimensions of the machine ca. 850 x 600 x 1300 mm
          Datasheet
          Request / Contact

          Band Saw

          used  Band Saw KASTO - Vollautomat PBA 320/460


          • Heinz Sanders GmbH
          • Fresenburger Weg 4
          • 49779 Niederlangen
          • Deutschland

          • +49 (0) 5939 9406 40
            +49 (0) 5939 9406 50
          • maschinen@heinz-sanders.de
            www.heinz-sanders.de
          #1125-6923 · Band Saw

          KASTO - Vollautomat - PBA 320/460 - - unbekannt -

          Technical details
          cutting diameter 100 - 320 mm︱saw band length 4670 mm︱cutting width 580 mm︱cutting speed 16-160 m/min︱dimensions of saw-band ca. 4670 x 38 mm︱ 100 x 320 / 100 x 460 mm︱total power requirement 7,4 kW︱weight of the machine ca. 3,0 t︱dimensions of the machine ca. 2,8 x 2,9 x 2,2 m︱
            cutting diameter 100 - 320 mm
            saw band length 4670 mm
            cutting width 580 mm
            cutting speed 16-160 m/min
            dimensions of saw-band ca. 4670 x 38 mm
            100 x 320 / 100 x 460 mm
            total power requirement 7,4 kW
            weight of the machine ca. 3,0 t
            dimensions of the machine ca. 2,8 x 2,9 x 2,2 m
            Description :

          Datasheet
          Request / Contact
          used  Band Saw MEP Shark 332-1 CCS


          • Heinz Sanders GmbH
          • Fresenburger Weg 4
          • 49779 Niederlangen
          • Deutschland

          • +49 (0) 5939 9406 40
            +49 (0) 5939 9406 50
          • maschinen@heinz-sanders.de
            www.heinz-sanders.de
          #1125-7075 · Band Saw

          MEP - Shark 332-1 CCS - - NEU -

          Technical details
          cutting diameter 300 mm︱saw band length 3650 mm︱cutting width 330 mm︱capacity 90 degrees: round 300 mm︱capacity 90 degrees: square 260 mm︱capacity 90 degrees: flat 330 x 260 mm︱capacity 45 degrees: round L 260 mm︱capacity 45 degrees: square L 250 mm︱capacity 90 degrees: flat L 270 x 200 mm︱capacity 60 degrees: round 180 mm︱capacity 60 degrees: square 170 mm︱capacity 60 degrees: flat 170 x 170 mm︱capacity 45 degrees: round R 200 mm︱capacity 45 degrees: square R 180 mm︱capacity 45 degrees: flat R 200 x 160 mm︱saw band length 3650 x 27 x 0,9 mm︱cutting speed 40 / 80 m/min︱total power requirement 1,5 / 1,8 kW︱weight of the machine ca. 0,640 t︱dimensions of the machine ca. 1,2 x 1,7 x 1,7 m︱
          Powerful miter band saw for cuts from 45 ° right to 60 ° Left CCS (CutControlSystem) for automatic cutting. (Stepless regulation of the Feed and shutdown at the end of the cut) New version: now with anti-vibration rollers and an even more powerful gear size 75 and considerably reinforced cast steel saw frame Description: CCS (CutControlSystem) for automatic cutting. (Stepless regulation of the Feed and shutdown at the end of the cut) Either automatic or manual cutting cycle Stable, torsion-resistant and low-vibration saw frame made of cast steel Carbide band guides for maximum cutting precision Large deflection discs, adjustable, made of cast steel Large, easily adjustable and mounted turntable, by means of central axis bolts centered turntable with indexing at 0 ° / 45 ° / 60 ° and internal Table clamp for intermediate angles. Interchangeable material supports made of steel Control panel on vertical post, swiveling, contains all control elements Saw band tension with band tension control and indication on the display by means of electronic converter Base with lockable door Large, laterally pull-out chip tray and coolant container with 2 powerful coolant pumps, flushing nozzle with volume control for Chip removal from the work area Coolant gun for cleaning the machine Vice with quick adjustment and interchangeable clamping and Stop jaws Chip removal brush for cleaning the saw band Machine is prepared for all options (see price list). (Electric wire, Software etc.) Standard equipment: Bi-metal saw band Adjustable length stop 600 mm with millimeter scale Tool kit Detailed operating instructions, maintenance manual, circuit diagrams and Exploded view Attachment adapter for supply roller conveyor including 1 support roller Entry possibility for forklifts / pallet trucks
            cutting diameter 300 mm
            saw band length 3650 mm
            cutting width 330 mm
            capacity 90 degrees: round 300 mm
            capacity 90 degrees: square 260 mm
            capacity 90 degrees: flat 330 x 260 mm
            capacity 45 degrees: round L 260 mm
            capacity 45 degrees: square L 250 mm
            capacity 90 degrees: flat L 270 x 200 mm
            capacity 60 degrees: round 180 mm
            capacity 60 degrees: square 170 mm
            capacity 60 degrees: flat 170 x 170 mm
            capacity 45 degrees: round R 200 mm
            capacity 45 degrees: square R 180 mm
            capacity 45 degrees: flat R 200 x 160 mm
            saw band length 3650 x 27 x 0,9 mm
            cutting speed 40 / 80 m/min
            total power requirement 1,5 / 1,8 kW
            weight of the machine ca. 0,640 t
            dimensions of the machine ca. 1,2 x 1,7 x 1,7 m
            Description :
            Powerful miter band saw for cuts from 45 ° right to 60 °
            Left
            CCS (CutControlSystem) for automatic cutting. (Stepless regulation of the
            Feed and shutdown at the end of the cut)
            New version: now with anti-vibration rollers and an even more powerful gear
            size 75 and considerably reinforced cast steel saw frame

            Description:
            CCS (CutControlSystem) for automatic cutting. (Stepless regulation of the
            Feed and shutdown at the end of the cut)
            Either automatic or manual cutting cycle
            Stable, torsion-resistant and low-vibration saw frame made of cast steel
            Carbide band guides for maximum cutting precision
            Large deflection discs, adjustable, made of cast steel
            Large, easily adjustable and mounted turntable, by means of central axis bolts
            centered turntable with indexing at 0 ° / 45 ° / 60 ° and internal
            Table clamp for intermediate angles. Interchangeable material supports made of
            steel
            Control panel on vertical post, swiveling, contains all control elements
            Saw band tension with band tension control and indication on the display by
            means of
            electronic converter
            Base with lockable door
            Large, laterally pull-out chip tray and coolant container with 2
            powerful coolant pumps, flushing nozzle with volume control for
            Chip removal from the work area
            Coolant gun for cleaning the machine
            Vice with quick adjustment and interchangeable clamping and
            Stop jaws
            Chip removal brush for cleaning the saw band
            Machine is prepared for all options (see price list). (Electric wire,
            Software etc.)

            Standard equipment:
            Bi-metal saw band
            Adjustable length stop 600 mm with millimeter scale
            Tool kit
            Detailed operating instructions, maintenance manual, circuit diagrams and
            Exploded view
            Attachment adapter for supply roller conveyor including 1 support roller
            Entry possibility for forklifts / pallet trucks
          Datasheet
          Request / Contact
          used  Band Saw MEBA - VOLLAUTOMAT MEBAeco 335 DGA 2300


          • Heinz Sanders GmbH
          • Fresenburger Weg 4
          • 49779 Niederlangen
          • Deutschland

          • +49 (0) 5939 9406 40
            +49 (0) 5939 9406 50
          • maschinen@heinz-sanders.de
            www.heinz-sanders.de
          #1125-2170005 · Band Saw

          MEBA - VOLLAUTOMAT - MEBAeco 335 DGA 2300 - - NEU -

          Technical details
          cutting diameter 335 mm︱saw band length 4400 x 34 x 1,1 mm︱table height 750 mm︱capacity 90 degrees: flat 500 x 335 mm︱capacity 45 degrees: round 330 mm︱capacity 45 degrees: flat 320 x 335 mm︱capacity 45 degrees: round links 305 mm︱capacity 45 degrees: flat links 305 x 335 mm︱capacity 30 degrees: round 180 ︱capacity 30 degrees: flat 170 x 33515 - 150 m/min︱workpiece weight max. 250 kg/m kg︱ 3,0 kW︱ 2600 kg︱ 4900 x 2200 x 1950 mm︱
          - The ergonomic panel control can be networked and offers various option packs * Teleservice for remote maintenance * Setting of sawing programs in the AV * Import of saw programs from CAD with DSTV interface and data export - Automatic material feed: - In a compact design for shorter sections or with flexible insertion tongs available in almost all lengths - Exact positioning of the material using servo positioning technology - Forward-looking electric saw feed with ball screw: highest Cutting performance and quality, while being gentle on the saw blade - Consistent use of the most modern recirculating ball guides: smooth-running, highly resilient, low-maintenance and backlash-free - Unique and patented double miter system: material is always stretched at right angles - Insertion tongs can be extended as required in 1000 mm increments Furnishing: - Automatic cutting pressure and feed monitoring - Frequency-controlled AC drive 15-150 m/min, 3 kW - Hydraulic material full stroke clamping - Automatic movement of the vice - Automatic saw frame height adjustment - Minimum speed and saw band monitoring - Electric miter swiveling via servo motor - Visualized program input with CNC control - Integrated MEBA tong insertion system from 5-2300 mm per stroke with integrated roller conveyor *Optional equipment: - Laser light for cutting line indication/scribing saws - Driven chip brush - Micro dosing system - Job menu - MEBA NC Server comfort package - Scraper belt conveyor for optimal chip disposal, 2000 mm length - Installation elements (4 pieces) - Adjustable deflector plate 335 DGA
            cutting diameter 335 mm
            saw band length 4400 x 34 x 1,1 mm
            table height 750 mm
            capacity 90 degrees: flat 500 x 335 mm
            capacity 45 degrees: round 330 mm
            capacity 45 degrees: flat 320 x 335 mm
            capacity 45 degrees: round links 305 mm
            capacity 45 degrees: flat links 305 x 335 mm
            capacity 30 degrees: round 180
            capacity 30 degrees: flat 170 x 335
            15 - 150 m/min
            workpiece weight max. 250 kg/m kg
            3,0 kW
            2600 kg
            4900 x 2200 x 1950 mm
            Description :
            - The ergonomic panel control can be networked and offers various
            option packs
            * Teleservice for remote maintenance
            * Setting of sawing programs in the AV
            * Import of saw programs from CAD with DSTV interface and data export
            - Automatic material feed:
            - In a compact design for shorter sections or with flexible insertion tongs
            available in almost all lengths
            - Exact positioning of the material using servo positioning technology
            - Forward-looking electric saw feed with ball screw: highest
            Cutting performance and quality, while being gentle on the saw blade
            - Consistent use of the most modern recirculating ball guides: smooth-running,
            highly resilient, low-maintenance and backlash-free
            - Unique and patented double miter system: material is always
            stretched at right angles
            - Insertion tongs can be extended as required in 1000 mm increments

            Furnishing:
            - Automatic cutting pressure and feed monitoring
            - Frequency-controlled AC drive 15-150 m/min, 3 kW
            - Hydraulic material full stroke clamping
            - Automatic movement of the vice
            - Automatic saw frame height adjustment
            - Minimum speed and saw band monitoring
            - Electric miter swiveling via servo motor
            - Visualized program input with CNC control
            - Integrated MEBA tong insertion system from 5-2300 mm per stroke with
            integrated
            roller conveyor

            *Optional equipment:
            - Laser light for cutting line indication/scribing saws
            - Driven chip brush
            - Micro dosing system
            - Job menu
            - MEBA NC Server comfort package
            - Scraper belt conveyor for optimal chip disposal, 2000 mm length
            - Installation elements (4 pieces)
            - Adjustable deflector plate 335 DGA
          Datasheet
          Request / Contact
          used  Band Saw MEP - Halbautomat Shark 281 SXI evo


          • Heinz Sanders GmbH
          • Fresenburger Weg 4
          • 49779 Niederlangen
          • Deutschland

          • +49 (0) 5939 9406 40
            +49 (0) 5939 9406 50
          • maschinen@heinz-sanders.de
            www.heinz-sanders.de
          #1125-5282 · Band Saw

          MEP - Halbautomat - Shark 281 SXI evo - - NEU -

          Technical details
          cutting diameter 250 mm︱saw band length 2950 mm︱table height -- mm︱ 280 mm︱ 2950 x 27 x 0,9 mm︱ 280 x 200 mm︱ 230 mm︱ 190 mm︱ 180 x 180 mm︱ 180 mm︱ 120 mm︱ 110 x 110 mm︱ 110 mm︱ 36 / 72 m/min︱ 1,5 / 1,8 kW︱
          powerful, electro-hydraulic, semi-automatic band saw machine for Miter cuts from 0 ° to 60 ° left. Control modes: Semi-automatic operation (start / stop position of the saw bow is controlled by the Keyboard programmed. Vice closes / opens automatically, saw bow is automatically returned to the beginning of the cut) -Stable, torsion-resistant and low-vibration saw frame made of cast steel - Carbide band guides for maximum cutting precision -Large dimensioned deflection discs, adjustable made of cast steel -Control panel on vertical post, swiveling, contains all operating elements -Control with soft-touch keyboard, backlit display for display all machine parameters and messages in plain text: Number of cuts (piece counter) + cutting time + power consumption of the Saw band motor + saw band tension in kg (minimum band tension = 900 kg) + Saw frame position (Y-axis) / alarms / faults (description and causes) + Diagnosis… -Saw band tension with band tension control and indication on the display by means of electronic converter -Underframe with lockable door and removable coolant tray, electric coolant pump. -Vise with quick adjustment -Schipping brush for cleaning the saw band -Machine is prepared for all options (see price list). (Electric wire, Software etc.)
            cutting diameter 250 mm
            saw band length 2950 mm
            table height -- mm
            280 mm
            2950 x 27 x 0,9 mm
            280 x 200 mm
            230 mm
            190 mm
            180 x 180 mm
            180 mm
            120 mm
            110 x 110 mm
            110 mm
            36 / 72 m/min
            1,5 / 1,8 kW
            Description :
            powerful, electro-hydraulic, semi-automatic band saw machine for
            Miter cuts from 0 ° to 60 ° left.

            Control modes:
            Semi-automatic operation (start / stop position of the saw bow is controlled by
            the Keyboard programmed. Vice closes / opens automatically, saw bow
            is automatically returned to the beginning of the cut)

            -Stable, torsion-resistant and low-vibration saw frame made of cast steel
            - Carbide band guides for maximum cutting precision
            -Large dimensioned deflection discs, adjustable made of cast steel
            -Control panel on vertical post, swiveling, contains all operating elements
            -Control with soft-touch keyboard, backlit display for display
            all machine parameters and messages in plain text:
            Number of cuts (piece counter) + cutting time + power consumption of the
            Saw band motor + saw band tension in kg (minimum band tension = 900 kg) +
            Saw frame position (Y-axis) / alarms / faults (description and causes) +
            Diagnosis…
            -Saw band tension with band tension control and indication on the display by
            means of electronic converter
            -Underframe with lockable door and removable coolant tray, electric coolant
            pump.
            -Vise with quick adjustment
            -Schipping brush for cleaning the saw band
            -Machine is prepared for all options (see price list). (Electric wire,
            Software etc.)
          Datasheet
          Request / Contact
          used  Band Saw MEP PH 261-1 HB


          • Heinz Sanders GmbH
          • Fresenburger Weg 4
          • 49779 Niederlangen
          • Deutschland

          • +49 (0) 5939 9406 40
            +49 (0) 5939 9406 50
          • maschinen@heinz-sanders.de
            www.heinz-sanders.de
          #1125-3916 · Band Saw

          MEP - PH 261-1 HB - - NEU -

          Technical details
          cutting diameter 225 mm︱saw band length 2450 mm︱table height mm︱cutting width 240 mm︱dimensions of saw-band 2450 x 27 x 0,9 mm︱area output 240 mm︱band speed 46/92 m/min︱capacity 90 degrees: round 225 mm︱capacity 90 degrees: square 200 mm︱capacity 90 degrees: flat 240 x 160 mm︱capacity 45 degrees: round 160 mm︱capacity 45 degrees: flat 155 x 115 mm︱capacity 45 degrees: square 140 mm︱capacity 60 degrees: round 90 mm︱capacity 60 degrees: flat 90 x 90 mm︱capacity 60 degrees: square 90 mm︱total power requirement 1,4 kW︱weight of the machine ca. 0,24 t︱dimensions of the machine ca. m︱
          Compact, powerful workshop miter band saw machine for cuts from 0 ° to 60 ° left AUTOMATIC CUT: (via selector switch) with stepless settings of the Lowering speed and adjustment of the cutting pressure via compensating spring Description: -Manual cutting cycle and automatic cutting -AUTOMATIC CUT: (via selector switch) with stepless settings of the Lowering speed and adjustment of the cutting pressure via compensating spring -Stable, torsion-resistant and low-vibration saw frame made of cast steel -Vice with quick release - Carbide band guides for maximum cutting precision -Large dimensioned deflection discs, adjustable made of cast steel -Saw band tension with limit switch to check the correct band tension -Clearly arranged control panel with all controls -Electric coolant pump for cooling and lubricating the saw band -Schipping brush for cleaning the saw band
            cutting diameter 225 mm
            saw band length 2450 mm
            cutting width 240 mm
            dimensions of saw-band 2450 x 27 x 0,9 mm
            area output 240 mm
            band speed 46/92 m/min
            capacity 90 degrees: round 225 mm
            capacity 90 degrees: square 200 mm
            capacity 90 degrees: flat 240 x 160 mm
            capacity 45 degrees: round 160 mm
            capacity 45 degrees: flat 155 x 115 mm
            capacity 45 degrees: square 140 mm
            capacity 60 degrees: round 90 mm
            capacity 60 degrees: flat 90 x 90 mm
            capacity 60 degrees: square 90 mm
            total power requirement 1,4 kW
            weight of the machine ca. 0,24 t
            Description :
            Compact, powerful workshop miter band saw machine for cuts from
            0 ° to 60 ° left

            AUTOMATIC CUT: (via selector switch) with stepless settings of the
            Lowering speed and adjustment of the cutting pressure via compensating spring

            Description:
            -Manual cutting cycle and automatic cutting
            -AUTOMATIC CUT: (via selector switch) with stepless settings of the
            Lowering speed and adjustment of the cutting pressure via compensating spring
            -Stable, torsion-resistant and low-vibration saw frame made of cast steel
            -Vice with quick release
            - Carbide band guides for maximum cutting precision
            -Large dimensioned deflection discs, adjustable made of cast steel
            -Saw band tension with limit switch to check the correct band tension
            -Clearly arranged control panel with all controls
            -Electric coolant pump for cooling and lubricating the saw band
            -Schipping brush for cleaning the saw band
          Datasheet
          Request / Contact
          used  Band Saw MEP - Halbautomat SHARK 512 SXI evo


          • Heinz Sanders GmbH
          • Fresenburger Weg 4
          • 49779 Niederlangen
          • Deutschland

          • +49 (0) 5939 9406 40
            +49 (0) 5939 9406 50
          • maschinen@heinz-sanders.de
            www.heinz-sanders.de
          #1125-6614 · Band Saw

          MEP - Halbautomat - SHARK 512 SXI evo - - NEU -

          Technical details
          cutting diameter 330 mm︱saw band length 4640 mm︱cutting width 510 mm︱capacity 90 degrees: flat 510 x 320 mm︱capacity 90 degrees: round 330 mm︱capacity 90 degrees: square 320 mm︱capacity 45 degrees: flat li. 350 x 320 / re. 380 x mm︱capacity 45 degrees: round li. 320 / re. 320 mm︱capacity 45 degrees: square li. 320 / re. 320 mm︱capacity 60 degrees: flat li. 230 x 310 / re. 250 x mm︱capacity 60 degrees: round li. 200 / re. 200 mm︱capacity 60 degrees: square li. 200 / re. 200 mm︱weight of the machine ca. 1,19 t︱total power requirement 4,0 kW︱
          Powerful miter band saw for cuts from 60 ° right to 60 ° Left With saw band 34 x 1.1 mm (5.5 kW frequency converter, 4 kW belt drive motor) Electro-hydraulic semi-automatic machine with microprocessor control Functionality: -Semi-automatic operation (start / stop position of the saw bow is controlled via the Keyboard programmed. Vice closes / opens automatically, saw bow is automatically returned to the beginning of the cut) Features: -Stable, torsion-resistant and low-vibration saw frame made of cast steel - Carbide band guides for maximum cutting precision. Front, adjustable Tape guide holder on linear guides for easy, fast and accurate Adjustment for the cutting area -Large dimensioned deflection discs, adjustable made of cast steel -Large, easily adjustable and mounted turntable, by means of central axis bolts centered turntable with precision stops at 0 ° / 45 ° / 60 ° and Table clamp for intermediate angles -Control panel, swiveling, contains all operating elements -Control with soft-touch keyboard, backlit display for display all machine parameters and messages in plain text, including: -Number of cuts (piece counter), cutting time, power consumption of the Saw band motor, saw band tension in kg (minimum band tension = 900 kg), Saw frame position (Y-axis), alarms / faults (description and causes), Diagnosis… -Saw band tension with band tension control and indication on the display by means of electronic converter -Frequency converter for stepless drive of the tool -Underframe with lockable door -Large, laterally pull-out chip tray and coolant container with 2 powerful coolant pumps, flushing nozzle with volume control for Removal of chips from the work area -Coolant gun to clean the machine -Vise with quick adjustment and exchangeable clamping and Stop jaws, lateral adjustment on linear guides - Chip removal brush, driven, for cleaning the saw band -Machine is prepared for all options (see price list). (Electric wire, Software etc.) Standard equipment: -Bi-metal saw band -Adjustable length stop 600 mm with millimeter scale Tool kit -Detailed operating instructions, maintenance manual, circuit diagrams and Exploded view -Adapter for supply roller conveyor incl. 1 support roller - Entry option for forklift / pallet truck transport
            cutting diameter 330 mm
            saw band length 4640 mm
            cutting width 510 mm
            capacity 90 degrees: flat 510 x 320 mm
            capacity 90 degrees: round 330 mm
            capacity 90 degrees: square 320 mm
            capacity 45 degrees: flat li. 350 x 320 / re. 380 x mm
            capacity 45 degrees: round li. 320 / re. 320 mm
            capacity 45 degrees: square li. 320 / re. 320 mm
            capacity 60 degrees: flat li. 230 x 310 / re. 250 x mm
            capacity 60 degrees: round li. 200 / re. 200 mm
            capacity 60 degrees: square li. 200 / re. 200 mm
            weight of the machine ca. 1,19 t
            total power requirement 4,0 kW
            Description :
            Powerful miter band saw for cuts from 60 ° right to 60 ° Left

            With saw band 34 x 1.1 mm (5.5 kW frequency converter, 4 kW belt drive motor)
            Electro-hydraulic semi-automatic machine with microprocessor control

            Functionality:
            -Semi-automatic operation (start / stop position of the saw bow is controlled
            via the
            Keyboard programmed. Vice closes / opens automatically, saw bow
            is automatically returned to the beginning of the cut)

            Features:
            -Stable, torsion-resistant and low-vibration saw frame made of cast steel
            - Carbide band guides for maximum cutting precision. Front, adjustable
            Tape guide holder on linear guides for easy, fast and accurate
            Adjustment for the cutting area
            -Large dimensioned deflection discs, adjustable made of cast steel
            -Large, easily adjustable and mounted turntable, by means of central axis bolts
            centered turntable with precision stops at 0 ° / 45 ° / 60 ° and
            Table clamp for intermediate angles
            -Control panel, swiveling, contains all operating elements
            -Control with soft-touch keyboard, backlit display for display
            all machine parameters and messages in plain text, including:
            -Number of cuts (piece counter), cutting time, power consumption of the
            Saw band motor, saw band tension in kg (minimum band tension = 900 kg),
            Saw frame position (Y-axis), alarms / faults (description and causes),
            Diagnosis…
            -Saw band tension with band tension control and indication on the display by
            means of
            electronic converter
            -Frequency converter for stepless drive of the tool
            -Underframe with lockable door
            -Large, laterally pull-out chip tray and coolant container with 2
            powerful coolant pumps, flushing nozzle with volume control for
            Removal of chips from the work area
            -Coolant gun to clean the machine
            -Vise with quick adjustment and exchangeable clamping and
            Stop jaws, lateral adjustment on linear guides
            - Chip removal brush, driven, for cleaning the saw band
            -Machine is prepared for all options (see price list). (Electric wire,
            Software etc.)

            Standard equipment:
            -Bi-metal saw band
            -Adjustable length stop 600 mm with millimeter scale
            Tool kit
            -Detailed operating instructions, maintenance manual, circuit diagrams and
            Exploded view
            -Adapter for supply roller conveyor incl. 1 support roller
            - Entry option for forklift / pallet truck transport
          Datasheet
          Request / Contact
          •   
          •   
          • 1  
          • 2  
          • 3  
          • 4  
          • 5  
          • 6  
          • 7  
          • 8  
          •   
          •   

          Heinz Sanders GmbH Maschinen - Werkzeuge - Schweisstechnik  49779 - Niederlangen Fresenburger Weg 4 Deutschland


          Contact Trader


            Heinz Sanders GmbH Maschinen - Werkzeuge - Schweisstechnik
           Fresenburger Weg 4
            49779 - Niederlangen
            Deutschland
            +49 (0) 5939 9406 40
            +49 (0) 5939 9406 50
            maschinen@heinz-sanders.de
            www.heinz-sanders.de
            Contact person:
          Frau Christine Fokken +49 (0) 5939 9406 40

           




          Machine category


          · Abkantpresse - hydraulisch · Absaugung · Airless- und Farbspritzgerät · Arbeitsbühne · Ausklinkmaschine · Bandschleifmaschine · Bandsäge · Bandsäge - Vertikal · Bearbeitungszentrum · Behälterdrehvorrichtung · Bettfräsmaschine - Universal · Bettfräsmaschine - Vertikal · Biegemaschine horizontal · Blechbiegemaschine - 3 Walzen · Blechrichtmaschinen · Bohrerschleifmaschine · Brennschneidemaschine · Bügelsäge · CNC Drehmaschine · Container · Doppelgehrungssäge · Doppelständerpresse - Hydraulisch · Dornrohrbiegemaschine · Drehmaschine-konventionell-elektronisch · Einständerpresse - Hydraulisch · Entgratmaschine · Fräsmaschine - Universal · Funiermaschine · Gabelhubwagen Hand · Gabelstapler · Gewindeschneidmaschine · Gleitschleifanlage · Handhebel-Schere · Handwerkzeuge · Hubwagen - Elektro · Kaltkreissäge · Kehrmaschine · Kettenzug - elektrisch · Kompressoren · Koordinatenbohrmaschine · Laserschneidmaschine · Lochstanze · Messplatte · Nutenfräsmaschine - Vertikal · Nutenziehmaschine · Papierpresse · Positionierer · Profilstahlschere - Kombiniert · Punktschweißmaschine · Radialbohrmaschine · Reinigungsanlage · Ring- Profil- Biegemaschine · Rohrbiegemaschine · Rollenbahnen / Anschlag-Systeme · Sandstrahlanlage · Scherenhubtisch · Schraubenkompressor · Schweißdrehtisch · Schweißdrehtisch - rund · Schweißroboter · Schweißtisch · Schwenkbiegemaschine · Schwerlastanhänger · Schwerlastregal · Sicken- und Bördelmaschine · Sonstige Lagertechnik · Spannfutter · Spritzgerät · Stromaggregat · Säge- und Bohranlage · Säulenbohrmaschine · Tafelschere - hydraulisch · Tafelschere - mechanisch · Tischbohrmaschine · Transportwagen · Unterstellbock · Vakuum-Lifter · Wasserstrahlschneidanlage · Werkbank · Werkstattpresse - hydraulisch · Werkzeugfräsmaschine - Universal · Werkzeugschrank ·