Plum & Partner Werkzeugmaschinen GmbH - Stockist for used machines

pressure 10 t︱distance between columns 425 mm︱dayligth 380 mm︱spindle diameter 50 mm︱weight of the machine ca. 200 kg︱dimensions of the machine ca. 1,3 x 0,8 x 2 m︱

---

Machine dealer with own stock of 1600 m².

pressure 25 t︱throat 300 mm︱stroke 400 mm︱Number of working hours 1235 h︱table-size 650 x 500 mm︱ram surface 550 x 450 mm︱dayligth 700 mm︱rapid traverse - down 500 mm/sec︱work speed 27 - 72 mm/sec︱rapid traverse - up 410 mm/sec︱quantity of oil 230 l︱die cushion capacity 125 kN︱die cushion stroke 200 mm︱capacity of ejector 8 kN︱ejector stroke 150 mm︱total power requirement 7,5 kW︱weight of the machine ca. 3,3 t︱dimensions of the machine ca. 1,3 x 1,6 x 2,8 m︱Electric 400 Volt ︱Light barrier in front ︱

---

Little used (only 1235 hours!) hydraulic single column press, power 25 t with Pilz safety control, ejector, light barrier and 2-manual operation. Upgrade with a current Pilz safety controller Mod. PNOZMulti m2pin in 2017. There is a small one in the piston rod of the cylinder Ejector cylinder integrated, which is controlled single-acting. The return stroke of the ejector takes place without force due to thesubsequent stroke of the Press cylinder. Machine intended for optionally retrofittable die cushion. Machine free due to production change. It comes from a large company and has been constantly maintained and kept up to date. Machine dealer with own stock of 1600 m²

pressure 10 t︱throat 235 mm︱stroke ca. 400 mm︱stroke speed - idle stroke downwards 4,5 m/min︱stroke speed - idle stroke upwards 10 m/min︱dayligth ca. 500/600 mm︱table-size ca. 450 x 400 mm︱ram hole 32 mm︱total power requirement 2,2 kW︱weight of the machine ca. 1,5 t︱dimensions of the machine ca. 0,95 x 0,45 x 2,1 m︱Electric 380 Volt ︱With elect. two-hand control through ︱separate console ︱Condition: ready for operation ︱Condition: geometric overhauled ︱Video available on our website. ︱

---

Hydraulic single-column press - from a training workshop, no guarantee on UVV, with two-hand control via separate control panel. Work only with safe tools or solid shields! Machine only works in full stroke, the stroke limiter of the ram cannot be regulated because the adjustment chain needs to be repaired, so it is sold at a special price. Machine dealer with own stock of 1600 m².

pressure - t︱punching cross-cut in cmm - ︱stroke 20 mm︱hole punching perforates max. 30 in 3 mm︱plate thickness 4 mm︱blade length 205 mm︱table-size 700 x 825 mm︱cutting capacity stainless steel 3 mm︱throat 300 mm︱strokes 50 p. min.︱oil tank 35 l︱total power requirement 3 kW︱weight of the machine ca. 720 t︱dimensions of the machine ca. 0,7 x 0,83 x 1,1 m︱Electric 380 Volt ︱Hole punching device ︱Foot switch ︱Support arms ︱Squaring arm withh mm-scale ︱Puch tools ( diverse ) ︱

---

Fixed angle hydraulic punching/nothing machine, more automatic cutting gap regulation and HOLE PUNCHING HEAD. The cutting head is guided stably in guide columns over the entire stroke length, so that an exact cut is always made. The cutting angle is negative, i.e. the knives cut from front to back. This means the sheet metal cannot bend move forward. The automatic cutting gap adjustment (patented) works over the lower blades (therefore no tipping of the cutting head and abrasion of the knife tips) and burr-free cuts are achieved with optimal protection the knife. When using the punching head, the cutting head is raised, the punching head mounted and it can be punched with a projection of up to 300 mm and a maximum of 30 x 3 mm. The machine is practically maintenance-free and the cutting area is with shatterproof, transparent plastic. The cutting performance relates has a strength of 420 N/mm². The machine was used in a well-kept small business for the production of stainless steel special parts are used for kitchens, laboratories and clinics and were only used by owner served. The machine is sold because the owners have reached retirement age. Machine dealer with own stock of 1600 m².

pressure 100 t︱punching cross-cut in cmm -- ︱stroke 100 mm︱throat 510 mm︱work height max. 1100 mm︱Twist power 31 Durchm. in 25 mm︱channels - flange 100-400 mm︱Number of ventilators 80-400 mm︱ 100-400 mm︱ 100-550 mm︱punch stroke bei 20 mm Hub: 60 p.Min︱sheet thickness max. bei Luftbiegung: 10 mm︱total power requirement 7,5 kW︱weight of the machine ca. 2,4 t︱dimensions of the machine ca. 1,7 x 0,9 x 2,3 m︱Electric 380 Volt ︱Diverse punches and dies ︱Foot pedal ︱Machinefeets ︱Video available on our website. ︱

---

Machine dealer with own stock of 1600 m².

stamp capacity 2 - 63 mm︱throat 110 / 200 mm︱

---

Various Destaco punching iron, some with accessories: No. 1 & 2: Type 101-200, accessories: one punch + one die, technical data: see picture, price per piece: 150,- No. 3: Type 102-200, accessories: approx. 12 sets of punches and dies, technical data: see picture, price per piece incl. accessories: 350,- No. 6 & 7: Type 103-200, accessories: approx. 12 sets of punches and dies, technical data: see picture, price per piece incl. accessories 500,- 1 Raskin punching iron type 10 JL 200, throat 210 mm, install height 238 mm, material thickness 3 mm in max. 40 kg/mm². pice 175,-- EUR 1 Raskin punching iron type 15 BL 100, throat 110 mm, install height 149 mm, material thickness 3 mm in max. 40 kg/mm². pice 120,-- EUR Diverse punching dies. We can also sell each of them. Machine dealer with own stock of 1600 m².

sheet thickness - max. 1 mm︱Minimum duct dimensions 100 x 100 mm︱bending speed ca. 15 m/min︱duct size min. bei 1 mm = 100 x 100 mm︱total power requirement 2,2 kW︱weight of the machine ca. 0,5 t︱dimensions of the machine ca. 5,5 x 0,65 x 1,1 m︱Electric 380 Volt ︱Foot switch ︱Machine still in the delivery factory ︱

---

Machine for the production of longitudinal folds on the edges of square and rectangular channels. The year of construction is estimated. Machine dealer with own stock of 1600 m²

sheet thickness - max. 1 mm︱Minimum duct dimensions 100 x 100 mm︱bending speed ca. 15 m/min︱duct size min. bei 1 mm = 100 x 100 mm︱total power requirement 2,2 kW︱weight of the machine ca. 0,5 t︱dimensions of the machine ca. 5,5 x 0,65 x 1,1 m︱Electric 380 Volt ︱Foot switch ︱Video available on our website. ︱Machine still in the delivery factory ︱

---

Machine for the production of longitudinal folds on the edges of square and rectangular channels. The year of construction is estimated. Machine dealer with own stock of 1600 m².

plate thickness 1,5 mm︱roll diameter 76 mm︱bending speed 4,7/9,4 m/min︱total power requirement 0,37/0,55 kW︱weight of the machine ca. 160 kg︱dimensions of the machine ca. 0,6 x 0,6 m︱Electric 380 Volt ︱

---

Universal flanging machine for raising rectangular shelves on straight, round and rectangular sheet metal parts. It has two flaring rollers, which in stand at a small angle of inclination to each other. The drive takes place via a flange geared motor that regulates two speeds in a pole-reversible manner. As a special accessory is an additional device for pressing in the cams for the cam standing seam available. The bending performance refers to 400 N/mm² strength. Machine dealer with own stock of 1600 m².

sheet width 3100 mm︱plate thickness 6 mm︱thickness at "Niro-steel" 4,5 mm︱daylight upper clamping 100 mm︱Bending angle 0 - 135 °︱total power requirement 7,4 kW︱weight of the machine ca. 7,6 t︱dimensions of the machine ca. 4,5 x 1,72 x 2 m︱Electric 380 Volt ︱manuel back gauge adjustable from the front 70 - 600 mm︱Foot switch with emergency stop ︱Segmented upper tool ︱Oil filling exklusive ︱Video available on our website. ︱

---

Machine dealer with own stock of 1600 m².

sheet width 2020 mm︱plate thickness 2 mm︱daylight upper clamping 122 mm︱bending angle max. 135 °︱range L-W-H 2,56 x 0,6 x 1,26 m︱weight of the machine ca. 1020 kg︱

---

Segmented top rail for bending box profiles, upper beam clamping hand-operated, manual bending beam actuation with weight compensation, degreescale, adjustable bend stop. Warranty = 12 months for single-shift operation. The bending performance refers to 380 N/mm² strength. Warranty = 12 months for single-layer operation. Warranty = 12 months for single-shift operation, this only covers spare parts the defective parts must be returned. The working time costs for The replacement is not covered, nor are the downtimes Machine. Machine dealer with own stock of 1600 m².

sheet width 1020 mm︱plate thickness 2,5 mm︱distance between columns 1045 mm︱daylight opening max. 47 mm︱bending angle max. 135 °︱weight of the machine ca. 290 kg︱dimensions of the machine ca. 1,35 x 0,86 x 1,17 m︱

---

Sengmentable upper rail, upper clamping foot-operated, manual bending clamping operate. The bending performance refers to 380 N/mm² strength. Machine dealer with own stock of 1600 m².

sheet width 2020 mm︱plate thickness 2 mm︱control Beijer ︱daylight upper clamping 100 mm︱Bending angle 0 - 135 °︱upper clamping drive 0,375 kW︱bend clamping drive 1,125 kW︱weight of the machine ca. 2,6 t︱dimensions of the machine ca. 3 x 1,1 x 1,75 m︱Foot switch with emergency stop ︱Segmented upper tool ︱Oil filling exklusive ︱Light barrier control ︱

---

Machine dealer with own stock of 1600 m².

sheet width 2040 mm︱plate thickness 3 mm︱daylight upper clamping 350 mm︱bending angle max. 0-135 °︱adjustment of lower and bend clamping 80 mm︱control Fastimatic M200 ︱power requirement 2,2/1,5 kW︱weight of the machine ca. 2460 kg︱dimensions of the machine ca. 3,2 x 2,8 x 2,1 m︱Electric 400 Volt ︱CNC-control with screen ︱Mot. back gauge 1000 mm︱Foot switch ︱Condition: ready for operation ︱Condition: very good ︱CE signed ︱Video available on our website. ︱

---

Motorized machine with motorized bending beam adjustment for setting the sheet thickness, screen control Fastimatic M200 (DELEM FM 200 B) for controlling the top cheek stroke, the bending angle and the back gauge with max. 30 working steps, emergency stop switch with magnetic holder, back gauge with ball screw spindles, CE mark. The bending performance refers to sheets of strength of 400 N / mm². Little used machine, very good condition - original colour! Please notice that the price of a new CNC-machine in this dimension with back gauge is about 65000,--. Machine dealer with own stock of 1600 m².

material thickness - mm︱material width 730 mm︱table-size 2800 x 730 mm︱turning speeds max 12000 U/min︱speeds 1000 - 13500 U/min︱range L-W-H 3 x 0,85 x 0,57 m︱weight of the machine ca. 140 kg︱Electric 380 Volt ︱Machinefeets höhenverstellbar ︱

---

In-house construction of a universal grinding station consisting of a flexible shaft from Suhner with various attachments, a separate belt sanding unit for sanding edges with the same sanding direction (lying and standing - see photos 4+5) and the large sanding table made of aluminum profiles. This table is equipped with a manually movable and height-adjustable side stand that runs in a guide over the entire length. There is a horizontal support bar attached to it, to which the sanding brush is attached and which can be moved manually from front to back. The recording bar can also be tilted if necessary. With this system, larger areas with the same appearance can be sanded precisely without any effort. Here, stainless steel fronts, table tops, laboratory tables, etc. were provided with the typical surface brushing pattern. This system was used in a well-kept small business to produce special stainless steel parts for kitchens, laboratories and clinics and was only operated by the owner. The machine is sold because the owners have reached retirement age. Machine dealer with own stock of 1600 m.

sheet width - max. 300 mm︱plate thickness 8 mm︱flat steel 80 x 10 mm︱blade length 300 mm︱machine length 860 mm︱machine height 565 mm︱weight of the machine ca. 172 kg︱

---

Long measuring shear Machine dealer with own stock of 1600 m².

sheet width - max. 170 mm︱plate thickness 3,4 mm︱angle steel/side length 50 mm︱weight of the machine ca. 70 kg︱dimensions of the machine ca. 0,7 x 0,16 x 2,1 m︱

---

Is cutting flat steel, L-beam, Scorper, round and square material. Machine dealer with own stock of 1600 m².

sheet width - max. 1020 mm︱plate thickness 1,5 mm︱cutting length 1020 mm︱weight ca. 300 kg︱dimensions of the machine ca. 1,3 x 0,8 m︱Side stop 600 mm︱Material place of deposit ausziehbar ︱

---

Hand lever shears with counterweight, length stop, blank holder with Quick clamping, mm scale on the table, pull-out sheet metal support. Demonstration machine at a special price. Machine dealer with own stock of 1600 m².

pressure 100 t︱chamfer lenght 2550 mm︱distance between columns 2050 mm︱Control Delem DA-66T ︱throat 255 mm︱ram stroke 215 mm︱dayligth 530 mm︱rapid traverse - down 150 mm/sec︱press speed 1 - 9,8 mm/sec︱return speed 80 mm/sec︱power capacity 7,5 kW︱tank contens 228 l︱sound - pressure - turn off level ca. max. >70 dB︱connected load 12 kW︱weight of the machine ca. 7 t︱dimensions of the machine ca. 2,9 x 1,6 x 2,8 m︱Electric 400 Volt ︱Foot switch ︱Light barrier in front ︱Matrize im Stück ︱

---

Hydraulic press brake with updated CNC control Delem DA-66T, controlled backgauge in the axes X and R as well as Z manually with 4 stop fingers, hydr. Modufix tool clamping, Lasersafe, Wila crowning. Continuous, cranked upper tool and die single V as you see in the video. X-axis back gauge 580 mm, max. 300 mm/sec, accuracy +/-0.05 mm. R-axis stop vertical 200 mm, 150 mm/sec, accuracy +/-0.05 mm. Z-axis stop button transverse, manual 1620 mm. Machine is being sold due to production change. The last test took place in 02/ 23 and was free of defects. Machine dealer with own stock of 1600 m²

pressure 50 t︱chamfer lenght 3075 mm︱distance between columns 2600 mm︱Control Sintesi ︱throat 250 mm︱upper clamping stroke 140 mm︱dayligth 295 mm︱pre-running speed 90 mm/sec︱press speed 1-7 mm/sec︱return speed 62 mm/sec︱total power requirement 4 kW︱weight of the machine ca. 4,4 t︱dimensions of the machine ca. 3,7 x 2,2 x 2,2 m︱Electric 380 Volt ︱Foot switch ︱2-hand-control panel ︱Upper tool divided 3000 mm︱Upper tool spitz/gekröpft ︱Matrize 1 V / geteilt, 3000 mm︱Matrize 4 V 3000 mm︱

---

Hydraulic press brake with Sintesi microprocessor control for the axes Y1 + Y2 immersion depth and x back gauge. The control calculates and controls the immersion depth by specifying the bending angle and the position of the back gauge. There are many split upper tools in the shape of a doe's foot and a pointed design, as well as a heavily cranked upper tool in 1000 mm. The machine was used in a well-kept small business to produce special stainless steel parts for kitchens, laboratories and clinics and was only operated by the owner. The machine is sold because the owners have reached retirement age. Machine dealer with own stock of 1600 m².

table length 3000 mm︱table width 1500 mm︱burner heads 1 ︱ 5000 W︱workpiece weight 900 kg︱max. feed 200 / simultan x+y 300 m/min︱accuracy +/- 0,10 mm︱ 25 mm︱sheet thickness for stainless steel 20 mm︱Sheet thickness aluminum 12 mm︱control Trumpf-Sinumerik 840D ︱Power connection 105 kVA︱Required air-pressure 7-10 bar︱rated capacity 33-72 kVA︱machine weight ab. 12000 kg︱dimensions of the machine ca. 11,2 x 4,6 x 2,4 m︱transport dimension 2,98 x 2,4 B X H m︱Electric 400 Volt ︱Light barrier behind ︱Light barrier in front ︱

---

Little-used high-speed laser cutting system (flatbed / CO2) made by TRUMPF, Mod.TruLaser 5030 Classic with TruFlow 5000 with pallet changer. Design: The workpiece is stationary, the cutting head moves. X-axis as a gantry drive using servo motors and Y + Z axes with linear direct drives. Commissioned in 2007, operating hours approx.: Beam ON: 8200 h, Laser ON: 28,000 h. CNC control based on SINUMERIK 840D with color monitor 12", 64 MB, USB interface, hard disk space 500MB. Standard equipment: • Laser TLF 5000 • HI-LAS high pressure cutting • Cutting head quick change device • autom. Sheet metal outer edge detection • APC height control and process control • PCS Process Control System • Position laser diode • progr. Cutting gas selection / pressure setting • progr. Performance cycles • Microweld • PMS plasma sensors • SprintLas in all sheet thicknesses • ContourLas • AutoLas Plus • Laser power control • Spray device • Laser logbook function • autom. Pallet changer • autom. Nozzle cleaning • Work area lighting • Small parts/waste conveyor • Multi-chamber suction • Compact dust extractor • TFT color screen • Automatic switch-off • Safety devices • ToPs 100 lite • RJ 45 network connection • Network connection • 3.5" floppy drive Machine was regularly serviced by Trumpf. NEW Power Tube Basic (Send tube) installed in 04/2023 for € 7000 with 12 month warranty! The license of the TruTops Classic software for programming the machine on the PC can be purchased at an additional cost. Machine dealer with own stock of 1600 m².

tube diameter 6 - 28 mm︱wall strength 2 mm︱bending radius min. 2 x D ︱Control IPU 20 ︱bending radius max. 5,0 x D mm︱bending angle max. 190 °︱arbor length 3000 mm︱operating pressure 180 bar︱hydraulic motor 4 kW︱weight of the machine ca. 900 kg︱dimensions of the machine ca. 3,8 x 1,1 x 1,3 m︱Electric 400 Volt ︱Bending segments 15-20-26-28 mm︱Bending mandrels 4 ︱Operation panel 0,5 x 0,6 x 1,03 m︱Double Foot pedal ︱Machine manual ︱Condition: ready for operation ︱Video available on our website. ︱

---

Semi-automatic electro-hydr. mandrel tube bending machine with PLC control for 20 angles and display in the control panel for bending angle specification, angle detection and angle measurement via absolute value encoder, autom. tool plate reset, Turning device with digital display, hydr. quick chuck, aut. Mandrel lubrication, adjustable length stops. Operating modes: MANUAL and semi-automatic. Control buttons: hydraulics on / off, operating mode selection, clamp to / on, clamp forward / backward, mandrel forward / backward, bending forward / backward /, locking forward / backward, mandrel lubrication, turning device forward / backward, plate reset, length stop forward, emergency stop. The machine comes from a prototype construction and was only used a little until 2000. After that, the machines of this department were sold. However, the purchaser did not use the pipe bending machine and therefore it has only stood in the warehouse and has not worked since then. Please notice that the price of a new machine today is over € 60.000,--. Machine dealer with own stock of 1600 m².

plate thickness 4 mm︱blade length 205 mm︱table-size 700 x 825 mm︱cutting capacity stainless steel 3 mm︱throat 300 mm︱strokes 50 p. min.︱oil tank 35 l︱total power requirement 3 kW︱weight of the machine ca. 720 kg︱dimensions of the machine ca. 0,7 x 0,83 x 1,1 m︱Electric 380 Volt ︱Hole punching device ︱Foot switch ︱Support arms ︱Squaring arm withh mm-scale ︱Puch tools ( diverse ) ︱CE signed ︱Video(s) available on our website. ︱Condition: ready for operation ︱

---

Fixed angle hydraulic nothing machine, more automatic cutting gap regulation and HOLE PUNCHING HEAD. The cutting head is guided stably in guide columns over the entire stroke length, so that an exact cut is always made. The cutting angle is negative, i.e. the knives cut from front to back. This means the sheet metal cannot bend move forward. The automatic cutting gap adjustment (patented) works over the lower blades (therefore no tipping of the cutting head and abrasion of the knife tips) and burr-free cuts are achieved with optimal protection the knife. When using the punching head, the cutting head is raised, the punching head mounted and it can be punched with a projection of up to 300 mm and a maximum of 30 x 3 mm. The machine is practically maintenance-free and the cutting area is with shatterproof, transparent plastic. The cutting performance relates has a strength of 420 N/mm². The machine was used in a well-kept small business for the production of stainless steel special parts are used for kitchens, laboratories and clinics and were only used by owner served. The machine is sold because the owners have reached retirement age. Machine dealer with own stock of 1600 m².

plate thickness 4 mm︱blade length 200 mm︱table surface area 1000 x 780 mm︱angle adjustable from - to 30 - 140 Grad︱work height max. 910 mm︱thickness at "Niro-steel" 3 mm︱total power requirement 4 kW︱weight of the machine ca. 970 kg︱dimensions of the machine ca. 1 x 1,66 x 1,47 m︱Electric 380 Volt ︱Foot switch ︱Squaring arm 2 Stck.︱Machinelight ︱

---

Hydraulic notching machine with adjustable angle from 30° to 140°, aut. cutting gap adjustment, hydr. clamping of the knives. As a rare special accessory, the machine has a lifting height and cutting length adjustment Digital display. The height adjustment works, but in the cutting length range it always cuts the full length of 200 mm. Since the "length reduction" option is almost never ordered when purchasing these machines, except for a specific special application, we did not have the electronic device repaired. You can see the function of the machine in the video. The knife holder at the top has various chips from notching, but this has no effect on the attachment of the knives. The cutting performance refers to sheets with a strength of 400 N/mm². New set of blades at the top is installed and a set of blades at the bottom is available as a replacement! Machinedealer with own stock of 1600 m².