European network of stockholding machinery dealers

Bitte einen Suchbegriff eingeben - Please enter a search term
Category:
    Manufacturer:
      Machines:
        Trader:

          HESSE+CO Maschinenfabrik GesmbH Industriezentrum NÖ-Süd - Stockist for used machines

          Machinelist:


          Center Lathe

          used  Center Lathe ZMM C 400 TM


          • HESSE+CO Maschinenfabrik GesmbH
          • Straße 4 Objekt 8
          • 2351 Wiener Neudorf
          • Österreich

          • +43/2236/638 70-0
            +43/2236/636 62
          • office@hesse-maschinen.com
            https://www.hesse-maschinen.com
          #1069-2028 · Center Lathe

          ZMM - C 400 TM - - 2020 -

          Technical details
          gebraucht20201658prompt, Zwischenverkauf vBulgarien26500 €︱ 1400 mm︱ 1000 mm︱ 200 mm︱ 52 mm︱ 235 mm︱ 320 mm︱ 66 M︱ 1250-2.240 1/min︱ 800.015 - 0.6 mm/U︱ 0.0075 - 0.3 mm/U︱
          driven by manual transmission 3-axes digital readout Fagor 40i quick change toolpostMultifix Type Bwith4 holders (3 square, 1 round) 3-jaw chuck Bison 3204/DIN6350, Ø 200 mm spindle noseNr. 6 DIN 55027 four way rapid traverse device spindle dead center coolant equipment 1 pce. flange plate for lathe chuckØ 200 mm 1 adapter sleeve full length rear splash guard leadscrew and shaft protection safety guard for the chuck toolholder guard levelling bolts and plates quick release tailstock low voltage machine lamp operating manual machine according to "CE"
            gebraucht
            2020
            1658
            prompt, Zwischenverkauf v
            Bulgarien
            26500 €
            1
            400 mm
            1000 mm
            200 mm
            52 mm
            235 mm
            320 mm
            6
            6 M
            12
            50-2.240 1/min
            80
            0.015 - 0.6 mm/U
            0.0075 - 0.3 mm/U
            Description :
            driven by manual transmission
            3-axes digital readout Fagor 40i
            quick change toolpostMultifix Type Bwith4 holders (3 square, 1 round)
            3-jaw chuck Bison 3204/DIN6350, Ø 200 mm
            spindle noseNr. 6 DIN 55027
            four way rapid traverse device
            spindle dead center
            coolant equipment
            1 pce. flange plate for lathe chuckØ 200 mm
            1 adapter sleeve
            full length rear splash guard
            leadscrew and shaft protection
            safety guard for the chuck
            toolholder guard
            levelling bolts and plates
            quick release tailstock
            low voltage machine lamp
            operating manual
            machine according to "CE"
          Datasheet
          Request / Contact
          used  Center Lathe ZMM CU / SU 582


          • HESSE+CO Maschinenfabrik GesmbH
          • Straße 4 Objekt 8
          • 2351 Wiener Neudorf
          • Österreich

          • +43/2236/638 70-0
            +43/2236/636 62
          • office@hesse-maschinen.com
            https://www.hesse-maschinen.com
          #1069-2157 · Center Lathe

          ZMM - CU / SU 582 - - 1991 -

          Technical details
          gebraucht19911681ca. 2 Wochen ab AuftragseBulgarien7900 €︱ 1580 mm︱ 2000 mm︱ 285 mm︱ 72 mm︱ 380 mm︱ 400 mm︱ DIN55022, Größe 880 M︱ 11,2 - 2000 1/min︱ 0.04 - 3 mm︱ 255 mm︱ 140 mm︱ 75 mm︱
          3-axes digital read out RSF 3-jaw chuck Forkardt Dm. 315 mm steady rest 4x steel holder gap bed type chuck protection machine lamp coolant equipment operating manual in German WITH FOLLOWING DEFECT: the clockwise rotation does not engage, so the hand lever must remain held
            gebraucht
            1991
            1681
            ca. 2 Wochen ab Auftragse
            Bulgarien
            7900 €
            1
            580 mm
            2000 mm
            285 mm
            72 mm
            380 mm
            400 mm
            DIN55022, Größe 8
            80 M
            11,2 - 2000 1/min
            0.04 - 3 mm
            255 mm
            140 mm
            75 mm
            Description :
            3-axes digital read out RSF
            3-jaw chuck Forkardt Dm. 315 mm
            steady rest
            4x steel holder
            gap bed type
            chuck protection
            machine lamp
            coolant equipment
            operating manual in German

            WITH FOLLOWING DEFECT:
            the clockwise rotation does not engage, so the hand lever must remain held
          Datasheet
          Request / Contact
          used  Center Lathe ZMM C 11 MCS


          • HESSE+CO Maschinenfabrik GesmbH
          • Straße 4 Objekt 8
          • 2351 Wiener Neudorf
          • Österreich

          • +43/2236/638 70-0
            +43/2236/636 62
          • office@hesse-maschinen.com
            https://www.hesse-maschinen.com
          #1069-949 · Center Lathe

          ZMM - C 11 MCS - - -

          Technical details
          neuBulgarien50600 €︱ 1017.06 €︱ 600 mm︱ 2000 mm︱ 300 mm︱ 80 mm︱ 400 mm︱ 400 mm︱ 890 M︱ 320 - 100; 80 - 400; 400 - U/Min︱ 120640.5 - 120 mm︱ 60 - 1/4 Gänge/"︱ 0.125 - 30315 mm︱
          In contrast to the universal lathes, here the adjustment of the revolutions is infinitely variable by means of a frequency inverter. It is possible to ensure a "constant cutting speed" (V-const), i.e. when changing the diameter to be machined, the speed remains unchanged and thus a higher accuracy and smoothness of the surface is achieved. At the customer's request, the machines can be manufactured with a reading of the linear displacement and positioning by mounting a digital display. driven by variable speed control (3 steps) 3-axes digital readout Fagor with CSS (constant surface speed) quick change toolpostAmestra type Multifix with 4 holders (3 square, 1 round) 3-jaw chuck Bison 3204/DIN6350, Ø 250 mm spindle dead center main motor with frequency invertor four way rapid traverse device longitudinal stop for 1 position coolant equipment full length rear splash guard leadscrew and shaft protection safety guard for the chuck toolholder guard levelling bolts and plates quick release tailstock low voltage machine lamp operating manual machine according to "CE" FURTHER TURNING LENGTHS: turning length1.000 mm € 47.850,- turning length1.500 mm € 48.890,- turning length3.000 mm € 55.090,- turning length4.000 mm € 60.340,- turning length5.000 mm € 74.360,-
            neu
            Bulgarien
            50600 €
            1017.06 €
            600 mm
            2000 mm
            300 mm
            80 mm
            400 mm
            400 mm
            8
            90 M
            3
            20 - 100; 80 - 400; 400 - U/Min
            120
            64
            0.5 - 120 mm
            60 - 1/4 Gänge/"
            0.125 - 30
            315 mm
            Description :
            In contrast to the universal lathes, here the adjustment of the revolutions is infinitely variable by means of a frequency inverter.

            It is possible to ensure a "constant cutting speed" (V-const), i.e. when changing the diameter to be machined, the speed remains unchanged and thus a higher accuracy and smoothness of the surface is achieved. At the customer's request, the machines can be manufactured with a reading of the linear displacement and positioning by mounting a digital display.

            driven by variable speed control (3 steps)
            3-axes digital readout Fagor with CSS (constant surface speed)
            quick change toolpostAmestra type Multifix with 4 holders (3 square, 1 round)
            3-jaw chuck Bison 3204/DIN6350, Ø 250 mm
            spindle dead center
            main motor with frequency invertor
            four way rapid traverse device
            longitudinal stop for 1 position
            coolant equipment
            full length rear splash guard
            leadscrew and shaft protection
            safety guard for the chuck
            toolholder guard
            levelling bolts and plates
            quick release tailstock
            low voltage machine lamp
            operating manual
            machine according to "CE"

            FURTHER TURNING LENGTHS:

            turning length1.000 mm
            € 47.850,-

            turning length1.500 mm
            € 48.890,-

            turning length3.000 mm
            € 55.090,-

            turning length4.000 mm
            € 60.340,-

            turning length5.000 mm
            € 74.360,-
          Datasheet
          Request / Contact
          used  Center Lathe ZMM CU 630 RD


          • HESSE+CO Maschinenfabrik GesmbH
          • Straße 4 Objekt 8
          • 2351 Wiener Neudorf
          • Österreich

          • +43/2236/638 70-0
            +43/2236/636 62
          • office@hesse-maschinen.com
            https://www.hesse-maschinen.com
          #1069-927 · Center Lathe

          ZMM - CU 630 RD - - -

          Technical details
          neuBulgarien55600 €︱ 1117.56 €︱ 630 mm︱ 2000 mm︱ 315 mm︱ 103 mm︱ 430 mm︱ 400 mm︱ 11120 M︱ 316 - 63; 63 - 250; 315 - U/Min︱ 1200.04 - 12 mm/U︱ 0.02 - 6 mm/U︱ 0.5 - 120 mm︱ 060 - 1/4 Gänge/"︱ 0.125 - 30
          driven by variable speed control (2 steps) 3-axes digital readout FAGOR with CSS (constant surface speed) quick change toolpostAmestra with 4 holders (3 square, 1 round) 3-jaw chuck Bison 3204/DIN6350, Ø 315 mm spindle dead center longitudinal stop for 1 position coolant equipment full length rear splash guard leadscrew and shaft protection safety guard for the chuck toolholder guard levelling bolts and plates quick release tailstock low voltage machine lamp operating manual machine according to "CE" FURTHER TURNING LENGTHS: turning length 1.000 mm € 52.850,- turning length1.500 mm € 53.890,- turning length3.000 mm € 60.190,- turning length4.000 mm € 65.540,- turning length5.000 mm € 79.660,-
            neu
            Bulgarien
            55600 €
            1117.56 €
            630 mm
            2000 mm
            315 mm
            103 mm
            430 mm
            400 mm
            11
            120 M
            3
            16 - 63; 63 - 250; 315 - U/Min
            120
            0.04 - 12 mm/U
            0.02 - 6 mm/U
            0.5 - 120 mm
            060 - 1/4 Gänge/"
            0.125 - 30
            Description :
            driven by variable speed control (2 steps)
            3-axes digital readout FAGOR with CSS (constant surface speed)
            quick change toolpostAmestra with 4 holders (3 square, 1 round)
            3-jaw chuck Bison 3204/DIN6350, Ø 315 mm
            spindle dead center
            longitudinal stop for 1 position
            coolant equipment
            full length rear splash guard
            leadscrew and shaft protection
            safety guard for the chuck
            toolholder guard
            levelling bolts and plates
            quick release tailstock
            low voltage machine lamp
            operating manual
            machine according to "CE"

            FURTHER TURNING LENGTHS:

            turning length 1.000 mm
            € 52.850,-

            turning length1.500 mm
            € 53.890,-

            turning length3.000 mm
            € 60.190,-

            turning length4.000 mm
            € 65.540,-

            turning length5.000 mm
            € 79.660,-
          Datasheet
          Request / Contact
          used  Center Lathe ZMM C 10 TH


          • HESSE+CO Maschinenfabrik GesmbH
          • Straße 4 Objekt 8
          • 2351 Wiener Neudorf
          • Österreich

          • +43/2236/638 70-0
            +43/2236/636 62
          • office@hesse-maschinen.com
            https://www.hesse-maschinen.com
          #1069-959 · Center Lathe

          ZMM - C 10 TH - - -

          Technical details
          neuBulgarien62950 €︱ 1265.3 €︱ 860 mm︱ 1500 mm︱ 430 mm︱ 132 mm︱ 620 mm︱ 560 mm︱ 11140 M︱ 177,5 - 1015 1/min︱ 1500.039 - 18 mm/U︱ 0.02 - 9 mm/U︱ 0.5 - 180 mm︱ 60 - 1/6 Gänge/"︱ 0.125 - 45
          driven by conventional transmission 3-axes digital readout quick change toolpostAmestra type Multifix with 4 holders (3 square, 1 round) 3-jaw chuck Bison3295/DIN6350, Ø 400 mm spindle dead center four way rapid traverse device foot pedal brake longitudinal stop for 1 position coolant equipment full length rear splash guard leadscrew and shaft protection safety guard for the chuck toolholder guard levelling bolts and plates quick release tailstock tailstock quill reducer mechanized movement of tailstock low voltage machine lamp operating manual machine according to "CE" FURTHER TURNING LENGTHS: turning length2.000 mm € 65.560,- turning length3.000 mm € 75.720,- turning length4.000 mm € 81.220,- turning length5.000 mm € 92.680,- turning length6.000 mm € 105.180,-
            neu
            Bulgarien
            62950 €
            1265.3 €
            860 mm
            1500 mm
            430 mm
            132 mm
            620 mm
            560 mm
            11
            140 M
            17
            7,5 - 1015 1/min
            150
            0.039 - 18 mm/U
            0.02 - 9 mm/U
            0.5 - 180 mm
            60 - 1/6 Gänge/"
            0.125 - 45
            Description :
            driven by conventional transmission
            3-axes digital readout
            quick change toolpostAmestra type Multifix with 4 holders (3 square, 1 round)
            3-jaw chuck Bison3295/DIN6350, Ø 400 mm
            spindle dead center
            four way rapid traverse device
            foot pedal brake
            longitudinal stop for 1 position
            coolant equipment
            full length rear splash guard
            leadscrew and shaft protection
            safety guard for the chuck
            toolholder guard
            levelling bolts and plates
            quick release tailstock
            tailstock quill reducer
            mechanized movement of tailstock
            low voltage machine lamp
            operating manual
            machine according to "CE"

            FURTHER TURNING LENGTHS:

            turning length2.000 mm
            € 65.560,-

            turning length3.000 mm
            € 75.720,-

            turning length4.000 mm
            € 81.220,-

            turning length5.000 mm
            € 92.680,-

            turning length6.000 mm
            € 105.180,-
          Datasheet
          Request / Contact
          used  Center Lathe ZMM C 10 TM


          • HESSE+CO Maschinenfabrik GesmbH
          • Straße 4 Objekt 8
          • 2351 Wiener Neudorf
          • Österreich

          • +43/2236/638 70-0
            +43/2236/636 62
          • office@hesse-maschinen.com
            https://www.hesse-maschinen.com
          #1069-953 · Center Lathe

          ZMM - C 10 TM - - -

          Technical details
          neuBulgarien71220 €︱ 1431.52 €︱ 760 mm︱ 3000 mm︱ 380 mm︱ 132 mm︱ 520 mm︱ 560 mm︱ 11140 M︱ 177,5 - 1015 1/min︱ 1500.039 - 18 mm/U︱ 0.02 - 9 mm/U︱ 0.5 - 180 mm︱ 60 - 1/6 Gänge/"︱ 0.125 - 45
          driven by conventional transmission 3-axes digital readout quick change toolpostAmestra type Multifix with 4 holders (3 square, 1 round) 3-jaw chuck Bison3295/DIN6350, Ø 400 mm spindle dead center four way rapid traverse device foot pedal brake longitudinal stop for 1 position coolant equipment full length rear splash guard leadscrew and shaft protection safety guard for the chuck toolholder guard levelling bolts and plates quick release tailstock tailstock quill reducer mechanized movement of tailstock low voltage machine lamp operating manual machine according to "CE" FURTHER TURNING LENGTHS: turning length1.500 mm € 58.450,- turning length2.000 mm € 61.160,- turning length4.000 mm € 76.720,- turning length5.000 mm € 88.280,- turning length6.000 mm € 100.680,-
            neu
            Bulgarien
            71220 €
            1431.52 €
            760 mm
            3000 mm
            380 mm
            132 mm
            520 mm
            560 mm
            11
            140 M
            17
            7,5 - 1015 1/min
            150
            0.039 - 18 mm/U
            0.02 - 9 mm/U
            0.5 - 180 mm
            60 - 1/6 Gänge/"
            0.125 - 45
            Description :
            driven by conventional transmission
            3-axes digital readout
            quick change toolpostAmestra type Multifix with 4 holders (3 square, 1 round)
            3-jaw chuck Bison3295/DIN6350, Ø 400 mm
            spindle dead center
            four way rapid traverse device
            foot pedal brake
            longitudinal stop for 1 position
            coolant equipment
            full length rear splash guard
            leadscrew and shaft protection
            safety guard for the chuck
            toolholder guard
            levelling bolts and plates
            quick release tailstock
            tailstock quill reducer
            mechanized movement of tailstock
            low voltage machine lamp
            operating manual
            machine according to "CE"

            FURTHER TURNING LENGTHS:

            turning length1.500 mm
            € 58.450,-

            turning length2.000 mm
            € 61.160,-

            turning length4.000 mm
            € 76.720,-

            turning length5.000 mm
            € 88.280,-

            turning length6.000 mm
            € 100.680,-
          Datasheet
          Request / Contact
          used  Center Lathe ZMM CU 500 M


          • HESSE+CO Maschinenfabrik GesmbH
          • Straße 4 Objekt 8
          • 2351 Wiener Neudorf
          • Österreich

          • +43/2236/638 70-0
            +43/2236/636 62
          • office@hesse-maschinen.com
            https://www.hesse-maschinen.com
          #1069-473 · Center Lathe

          ZMM - CU 500 M - - -

          Technical details
          neuBulgarien40800 €︱ 828.24 €︱ 500 mm︱ 1500 mm︱ 250 mm︱ 72 mm︱ 300 mm︱ 400 mm︱ 880 M︱ 2120-2000 1/min︱ 1200.04 - 12 mm/U︱ 0.02 - 6 mm/U︱ 640.5 - 120 mm︱ 0.125 - 30
          driven by manual transmission 3-axes digital readout quick change toolpostAmestra with 4 holders (3 square, 1 round) 3-jaw chuck Bison 3204/DIN6350, Ø 250 mm spindle dead center longitudinal stop for 1 position coolant equipment full length rear splash guard leadscrew and shaft protection safety guard for the chuck toolholder guard levelling bolts and plates quick release tailstock low voltage machine lamp operating manual machine according to "CE" FURTHER TURNING LENGTHS: turning length1.000 mm € 39.720,- turning length2.000 mm € 42.390,- turning length3.000 mm € 46.740,- turning length4.000 mm € 51.830,- turning length5.000 mm € 65.700,-
            neu
            Bulgarien
            40800 €
            828.24 €
            500 mm
            1500 mm
            250 mm
            72 mm
            300 mm
            400 mm
            8
            80 M
            21
            20-2000 1/min
            120
            0.04 - 12 mm/U
            0.02 - 6 mm/U
            64
            0.5 - 120 mm
            0.125 - 30
            Description :
            driven by manual transmission
            3-axes digital readout
            quick change toolpostAmestra with 4 holders (3 square, 1 round)
            3-jaw chuck Bison 3204/DIN6350, Ø 250 mm
            spindle dead center
            longitudinal stop for 1 position
            coolant equipment
            full length rear splash guard
            leadscrew and shaft protection
            safety guard for the chuck
            toolholder guard
            levelling bolts and plates
            quick release tailstock
            low voltage machine lamp
            operating manual
            machine according to "CE"

            FURTHER TURNING LENGTHS:

            turning length1.000 mm
            € 39.720,-

            turning length2.000 mm
            € 42.390,-

            turning length3.000 mm
            € 46.740,-

            turning length4.000 mm
            € 51.830,-

            turning length5.000 mm
            € 65.700,-
          Datasheet
          Request / Contact
          used  Center Lathe ZMM CU 500 MRD


          • HESSE+CO Maschinenfabrik GesmbH
          • Straße 4 Objekt 8
          • 2351 Wiener Neudorf
          • Österreich

          • +43/2236/638 70-0
            +43/2236/636 62
          • office@hesse-maschinen.com
            https://www.hesse-maschinen.com
          #1069-913 · Center Lathe

          ZMM - CU 500 MRD - - -

          Technical details
          neuBulgarien46190 €︱ 937.66 €︱ 500 mm︱ 1500 mm︱ 250 mm︱ 75 mm︱ 300 mm︱ 400 mm︱ 880 M︱ 325-100; 100-400; 500-2000 U/Min︱ 1200.04 - 12 mm/U︱ 0.02 - 6 mm/U︱ 0.5 - 120 mm︱ 0.125 - 301 - 240
          driven by variable speed control (3 steps) 3-axes digital readout FAGOR with CSS (constant surface speed) quick change toolpostAmestra with 4 holders (3 square, 1 round) 3-jaw chuck Bison 3204/DIN6350, Ø 250 mm spindle dead center longitudinal stop for 1 position coolant equipment full length rear splash guard leadscrew and shaft protection safety guard for the chuck toolholder guard levelling bolts and plates quick release tailstock low voltage machine lamp operating manual machine according to "CE" FURTHER TURNING LENGTHS: turning length 1.000 mm € 45.150,- turning length2.000 mm € 47.900,- turning length3.000 mm € 52.490,- turning length4.000 mm € 57.840,- turning length5.000 mm € 71.960,-
            neu
            Bulgarien
            46190 €
            937.66 €
            500 mm
            1500 mm
            250 mm
            75 mm
            300 mm
            400 mm
            8
            80 M
            3
            25-100; 100-400; 500-2000 U/Min
            120
            0.04 - 12 mm/U
            0.02 - 6 mm/U
            0.5 - 120 mm
            0.125 - 30
            1 - 240
            Description :
            driven by variable speed control (3 steps)
            3-axes digital readout FAGOR with CSS (constant surface speed)
            quick change toolpostAmestra with 4 holders (3 square, 1 round)
            3-jaw chuck Bison 3204/DIN6350, Ø 250 mm
            spindle dead center
            longitudinal stop for 1 position
            coolant equipment
            full length rear splash guard
            leadscrew and shaft protection
            safety guard for the chuck
            toolholder guard
            levelling bolts and plates
            quick release tailstock
            low voltage machine lamp
            operating manual
            machine according to "CE"

            FURTHER TURNING LENGTHS:

            turning length 1.000 mm
            € 45.150,-

            turning length2.000 mm
            € 47.900,-

            turning length3.000 mm
            € 52.490,-

            turning length4.000 mm
            € 57.840,-

            turning length5.000 mm
            € 71.960,-
          Datasheet
          Request / Contact
          used  Center Lathe ZMM C 10 THS


          • HESSE+CO Maschinenfabrik GesmbH
          • Straße 4 Objekt 8
          • 2351 Wiener Neudorf
          • Österreich

          • +43/2236/638 70-0
            +43/2236/636 62
          • office@hesse-maschinen.com
            https://www.hesse-maschinen.com
          #1069-961 · Center Lathe

          ZMM - C 10 THS - - -

          Technical details
          neuBulgarien70960 €︱ 1426.3 €︱ 860 mm︱ 1500 mm︱ 430 mm︱ 135 mm︱ 620 mm︱ 560 mm︱ 11140 M︱ 7 - 42; 28 - 170; 165 - 1 U/Min︱ 1500.039 - 18 mm/U︱ 0.02 - 9 mm/U︱ 0.5 - 180 mm︱ 60 - 1/6 Gänge/"︱ 0.125 - 45240
          driven by variable speed control (3 steps) 3-axes digital readout FAGOR with CSS (constant surface speed) quick change toolpostAmestra type Multifix with 4 holders (3 square, 1 round) 3-jaw chuck Bison3295/DIN6350, Ø 400 mm spindle dead center main motor with frequency invertor four way rapid traverse device foot pedal brake longitudinal stop for 1 position coolant equipment full length rear splash guard leadscrew and shaft protection safety guard for the chuck toolholder guard levelling bolts and plates quick release tailstock tailstock quill reducer mechanized movement of tailstock low voltage machine lamp operating manual machine according to "CE" FURTHER TURNING LENGTHS: turning length2.000 mm € 73.670,- turning length3.000 mm € 84.100,- turning length4.000 mm € 89.860,- turning length5.000 mm € 101.570,- turning length6.000 mm € 114.310,-
            neu
            Bulgarien
            70960 €
            1426.3 €
            860 mm
            1500 mm
            430 mm
            135 mm
            620 mm
            560 mm
            11
            140 M
            7 - 42; 28 - 170; 165 - 1 U/Min
            150
            0.039 - 18 mm/U
            0.02 - 9 mm/U
            0.5 - 180 mm
            60 - 1/6 Gänge/"
            0.125 - 45
            240
            Description :
            driven by variable speed control (3 steps)
            3-axes digital readout FAGOR with CSS (constant surface speed)
            quick change toolpostAmestra type Multifix with 4 holders (3 square, 1 round)
            3-jaw chuck Bison3295/DIN6350, Ø 400 mm
            spindle dead center
            main motor with frequency invertor
            four way rapid traverse device
            foot pedal brake
            longitudinal stop for 1 position
            coolant equipment
            full length rear splash guard
            leadscrew and shaft protection
            safety guard for the chuck
            toolholder guard
            levelling bolts and plates
            quick release tailstock
            tailstock quill reducer
            mechanized movement of tailstock
            low voltage machine lamp
            operating manual
            machine according to "CE"

            FURTHER TURNING LENGTHS:

            turning length2.000 mm
            € 73.670,-

            turning length3.000 mm
            € 84.100,-

            turning length4.000 mm
            € 89.860,-

            turning length5.000 mm
            € 101.570,-

            turning length6.000 mm
            € 114.310,-
          Datasheet
          Request / Contact
          used  Center Lathe ZMM C 10 TMS


          • HESSE+CO Maschinenfabrik GesmbH
          • Straße 4 Objekt 8
          • 2351 Wiener Neudorf
          • Österreich

          • +43/2236/638 70-0
            +43/2236/636 62
          • office@hesse-maschinen.com
            https://www.hesse-maschinen.com
          #1069-955 · Center Lathe

          ZMM - C 10 TMS - - -

          Technical details
          neuBulgarien78300 €︱ 1573.83 €︱ 760 mm︱ 3000 mm︱ 380 mm︱ 132 mm︱ 520 mm︱ 560 mm︱ 11140 M︱ 37 - 42; 28 - 170; 165 - 1 U/Min︱ 1500.039 - 18 mm/U︱ 0.02 - 9 mm/U︱ 0.5 - 180 mm︱ 60 - 1/6 Gänge/"︱ 0.125 - 45
          driven by variable speed control (3 steps) 3-axes digital readout FAGOR with CSS (constant surface speed) quick change toolpostAmestra type Multifix with 4 holders (3 square, 1 round) 3-jaw chuck Bison3295/DIN6350, Ø 400 mm spindle dead center main motor with frequency invertor four way rapid traverse device foot pedal brake longitudinal stop for 1 position coolant equipment full length rear splash guard leadscrew and shaft protection safety guard for the chuck toolholder guard levelling bolts and plates quick release tailstock tailstock quill reducer mechanized movement of tailstock low voltage machine lamp operating manual machine according to "CE" FURTHER TURNING LENGTHS: turning length 1.500 mm € 65.160,- turning length2.000 mm € 67.870,- turning length4.000 mm € 84.060,- turning length5.000 mm € 95.770,- turning length6.000 mm € 108.510,-
            neu
            Bulgarien
            78300 €
            1573.83 €
            760 mm
            3000 mm
            380 mm
            132 mm
            520 mm
            560 mm
            11
            140 M
            3
            7 - 42; 28 - 170; 165 - 1 U/Min
            150
            0.039 - 18 mm/U
            0.02 - 9 mm/U
            0.5 - 180 mm
            60 - 1/6 Gänge/"
            0.125 - 45
            Description :
            driven by variable speed control (3 steps)
            3-axes digital readout FAGOR with CSS (constant surface speed)
            quick change toolpostAmestra type Multifix with 4 holders (3 square, 1 round)
            3-jaw chuck Bison3295/DIN6350, Ø 400 mm
            spindle dead center
            main motor with frequency invertor
            four way rapid traverse device
            foot pedal brake
            longitudinal stop for 1 position
            coolant equipment
            full length rear splash guard
            leadscrew and shaft protection
            safety guard for the chuck
            toolholder guard
            levelling bolts and plates
            quick release tailstock
            tailstock quill reducer
            mechanized movement of tailstock
            low voltage machine lamp
            operating manual
            machine according to "CE"

            FURTHER TURNING LENGTHS:

            turning length 1.500 mm
            € 65.160,-

            turning length2.000 mm
            € 67.870,-

            turning length4.000 mm
            € 84.060,-

            turning length5.000 mm
            € 95.770,-

            turning length6.000 mm
            € 108.510,-
          Datasheet
          Request / Contact
          used  Center Lathe ZMM C 400 TS


          • HESSE+CO Maschinenfabrik GesmbH
          • Straße 4 Objekt 8
          • 2351 Wiener Neudorf
          • Österreich

          • +43/2236/638 70-0
            +43/2236/636 62
          • office@hesse-maschinen.com
            https://www.hesse-maschinen.com
          #1069-943 · Center Lathe

          ZMM - C 400 TS - - -

          Technical details
          neuBulgarien37580 €︱ 762.87 €︱ 400 mm︱ 750 mm︱ 200 mm︱ 52 mm︱ 235 mm︱ 320 mm︱ 66 M︱ 418-98; 48-265; 144-790; 3 U/Min︱ 800.015 - 0.6 mm/U︱ 0.0075 - 0.3 mm/U︱ 400.25 - 7.5 mm︱ 120 - 4 Gänge/"︱
          driven by variable speed control (4 steps) 3-axes digital readout FAGOR with CSS (constant surface speed) quick change toolpostAmestra with 4 holders (3 square, 1 round) 3-jaw chuck Bison 3204/DIN6350, Ø 200 mm spindle dead center coolant equipment full length rear splash guard leadscrew and shaft protection safety guard for the chuck toolholder guard levelling bolts and plates quick release tailstock low voltage machine lamp operating manual machine according to "CE" FURTHER TURNING LENGTHS: turning length 1.000 mm € 38.210,- turning length 1.500 mm € 39.140,-
            neu
            Bulgarien
            37580 €
            762.87 €
            400 mm
            750 mm
            200 mm
            52 mm
            235 mm
            320 mm
            6
            6 M
            4
            18-98; 48-265; 144-790; 3 U/Min
            80
            0.015 - 0.6 mm/U
            0.0075 - 0.3 mm/U
            40
            0.25 - 7.5 mm
            120 - 4 Gänge/"
            Description :
            driven by variable speed control (4 steps)
            3-axes digital readout FAGOR with CSS (constant surface speed)
            quick change toolpostAmestra with 4 holders (3 square, 1 round)
            3-jaw chuck Bison 3204/DIN6350, Ø 200 mm
            spindle dead center
            coolant equipment
            full length rear splash guard
            leadscrew and shaft protection
            safety guard for the chuck
            toolholder guard
            levelling bolts and plates
            quick release tailstock
            low voltage machine lamp
            operating manual
            machine according to "CE"

            FURTHER TURNING LENGTHS:

            turning length 1.000 mm
            € 38.210,-

            turning length 1.500 mm
            € 39.140,-
          Datasheet
          Request / Contact
          used  Center Lathe ZMM CU 1250 RD


          • HESSE+CO Maschinenfabrik GesmbH
          • Straße 4 Objekt 8
          • 2351 Wiener Neudorf
          • Österreich

          • +43/2236/638 70-0
            +43/2236/636 62
          • office@hesse-maschinen.com
            https://www.hesse-maschinen.com
          #1069-941 · Center Lathe

          ZMM - CU 1250 RD - - -

          Technical details
          neuBulgarien108130 €︱ 2151.79 €︱ 1320 mm︱ 1500 mm︱ 625 mm︱ 155 mm︱ 940 mm︱ 700 mm︱ 15160 M︱ 43,7 - 15,6; 14,7 - 62; 58 U/Min︱ 1600.032 - 38.9 mm/U︱ 0.016 - 19.45 mm/U︱ 0.5 - 480 mm︱ 1/16 - 60 Gänge/"︱ 0.125 - 120
          driven by variable speed control (4 steps) 3-axes digital readout FAGOR with CSS (constant surface speed) quick change toolpostAmestra with 4 holders (3 square, 1 round) 3-jaw chuck Bison 3204/DIN6350, Ø 500 mm spindle dead center coolant equipment full length rear splash guard leadscrew and shaft protection safety guard for the chuck toolholder guard levelling bolts and plates tailstock quill reducer electric motor movement of tailstock low voltage machine lamp operating manual machine according to "CE" FURTHER TURNING LENGTHS: turning length3.000 mm € 121.780,- turning length4.000 mm € 129.460,- turning lenght 5.000 mm € 139.900,- turning length6.000 mm € 155.300,-
            neu
            Bulgarien
            108130 €
            2151.79 €
            1320 mm
            1500 mm
            625 mm
            155 mm
            940 mm
            700 mm
            15
            160 M
            4
            3,7 - 15,6; 14,7 - 62; 58 U/Min
            160
            0.032 - 38.9 mm/U
            0.016 - 19.45 mm/U
            0.5 - 480 mm
            1/16 - 60 Gänge/"
            0.125 - 120
            Description :
            driven by variable speed control (4 steps)
            3-axes digital readout FAGOR with CSS (constant surface speed)
            quick change toolpostAmestra with 4 holders (3 square, 1 round)
            3-jaw chuck Bison 3204/DIN6350, Ø 500 mm
            spindle dead center
            coolant equipment
            full length rear splash guard
            leadscrew and shaft protection
            safety guard for the chuck
            toolholder guard
            levelling bolts and plates
            tailstock quill reducer
            electric motor movement of tailstock
            low voltage machine lamp
            operating manual
            machine according to "CE"

            FURTHER TURNING LENGTHS:

            turning length3.000 mm
            € 121.780,-

            turning length4.000 mm
            € 129.460,-

            turning lenght 5.000 mm
            € 139.900,-

            turning length6.000 mm
            € 155.300,-
          Datasheet
          Request / Contact
          used  Center Lathe ZMM CU 1250


          • HESSE+CO Maschinenfabrik GesmbH
          • Straße 4 Objekt 8
          • 2351 Wiener Neudorf
          • Österreich

          • +43/2236/638 70-0
            +43/2236/636 62
          • office@hesse-maschinen.com
            https://www.hesse-maschinen.com
          #1069-939 · Center Lathe

          ZMM - CU 1250 - - -

          Technical details
          neuBulgarien98230 €︱ 1974.42 €︱ 1320 mm︱ 1500 mm︱ 625 mm︱ 155 mm︱ 940 mm︱ 700 mm︱ 15160 M︱ 5 - 10001600.032 - 38.9 mm/U︱ 0.016 - 19.45 mm/U︱ 0.5 - 480 mm︱ 60 - 1/16 Gänge/"︱ 0.125 - 120685 mm︱
          driven by manual transmission 3-axes digital readout quick change toolpostAmestra with 4 holders (3 square, 1 round) 3-jaw chuck Bison 3204/DIN6350, Ø 500 mm spindle dead center coolant equipment full length rear splash guard leadscrew and shaft protection safety guard for the chuck toolholder guard levelling bolts and plates tailstock quill reducer electric motor movement of tailstock low voltage machine lamp operating manual machine according to "CE" FURTHER TURNING LENGTHS: turning length3.000 mm € 111.510,- turning length4.000 mm € 118.820,- turning length5.000 mm € 120.010,- turning length6.000 mm € 144.140,-
            neu
            Bulgarien
            98230 €
            1974.42 €
            1320 mm
            1500 mm
            625 mm
            155 mm
            940 mm
            700 mm
            15
            160 M
            5 - 1000
            160
            0.032 - 38.9 mm/U
            0.016 - 19.45 mm/U
            0.5 - 480 mm
            60 - 1/16 Gänge/"
            0.125 - 120
            685 mm
            Description :
            driven by manual transmission
            3-axes digital readout
            quick change toolpostAmestra with 4 holders (3 square, 1 round)
            3-jaw chuck Bison 3204/DIN6350, Ø 500 mm
            spindle dead center
            coolant equipment
            full length rear splash guard
            leadscrew and shaft protection
            safety guard for the chuck
            toolholder guard
            levelling bolts and plates
            tailstock quill reducer
            electric motor movement of tailstock
            low voltage machine lamp
            operating manual
            machine according to "CE"

            FURTHER TURNING LENGTHS:

            turning length3.000 mm
            € 111.510,-

            turning length4.000 mm
            € 118.820,-

            turning length5.000 mm
            € 120.010,-

            turning length6.000 mm
            € 144.140,-
          Datasheet
          Request / Contact
          used  Center Lathe ZMM CU 1000


          • HESSE+CO Maschinenfabrik GesmbH
          • Straße 4 Objekt 8
          • 2351 Wiener Neudorf
          • Österreich

          • +43/2236/638 70-0
            +43/2236/636 62
          • office@hesse-maschinen.com
            https://www.hesse-maschinen.com
          #1069-933 · Center Lathe

          ZMM - CU 1000 - - -

          Technical details
          neuBulgarien92180 €︱ 1852.82 €︱ 1090 mm︱ 1500 mm︱ 500 mm︱ 155 mm︱ 690 mm︱ 700 mm︱ 15160 M︱ 241600.032 - 38.9 mm/U︱ 0.016 - 19.45 mm/U︱ 0.5 - 480 mm︱ 60 - 1/16 Gänge/"︱ 0.125 - 120525 mm︱
          driven by manual transmission 3-axes digital readout quick change toolpostAmestra with 4 holders (3 square, 1 round) 3-jaw chuck Bison 3204/DIN6350, Ø 500 mm spindle dead center coolant equipment full length rear splash guard leadscrew and shaft protection safety guard for the chuck toolholder guard levelling bolts and plates tailstock quill reducer electric motor movement of tailstock low voltage machine lamp operating manual machine according to "CE" FURTHER TURNING LENGTHS turning length3.000 mm € 105.460,- turning length4.000 mm € 112.870,- turning length5.000 mm € 123.060,- turning length6.000 mm € 138.190,-
            neu
            Bulgarien
            92180 €
            1852.82 €
            1090 mm
            1500 mm
            500 mm
            155 mm
            690 mm
            700 mm
            15
            160 M
            24
            160
            0.032 - 38.9 mm/U
            0.016 - 19.45 mm/U
            0.5 - 480 mm
            60 - 1/16 Gänge/"
            0.125 - 120
            525 mm
            Description :
            driven by manual transmission
            3-axes digital readout
            quick change toolpostAmestra with 4 holders (3 square, 1 round)
            3-jaw chuck Bison 3204/DIN6350, Ø 500 mm
            spindle dead center
            coolant equipment
            full length rear splash guard
            leadscrew and shaft protection
            safety guard for the chuck
            toolholder guard
            levelling bolts and plates
            tailstock quill reducer
            electric motor movement of tailstock
            low voltage machine lamp
            operating manual
            machine according to "CE"

            FURTHER TURNING LENGTHS

            turning length3.000 mm
            € 105.460,-

            turning length4.000 mm
            € 112.870,-

            turning length5.000 mm
            € 123.060,-

            turning length6.000 mm
            € 138.190,-
          Datasheet
          Request / Contact
          used  Center Lathe ZMM CU 1000 RD


          • HESSE+CO Maschinenfabrik GesmbH
          • Straße 4 Objekt 8
          • 2351 Wiener Neudorf
          • Österreich

          • +43/2236/638 70-0
            +43/2236/636 62
          • office@hesse-maschinen.com
            https://www.hesse-maschinen.com
          #1069-935 · Center Lathe

          ZMM - CU 1000 RD - - -

          Technical details
          neuBulgarien102070 €︱ 2031.19 €︱ 1090 mm︱ 1500 mm︱ 500 mm︱ 155 mm︱ 690 mm︱ 700 mm︱ 15160 M︱ 43,7 - 15,6; 14,7 - 62; 58 U/Min︱ 1600.032 - 38.9 mm/U︱ 0.016 - 19.45 mm/U︱ 0.5 - 480 mm︱ 60 - 1/16 Gänge/"︱ 0.125 - 120
          driven by variable speed control (4 steps) 3-axes digital readout FAGOR with CSS (constant surface speed) quick change toolpostAmestra with 4 holders (3 square, 1 round) 3-jaw chuck Bison 3204/DIN6350, Ø 500 mm spindle dead center coolant equipment full length rear splash guard leadscrew and shaft protection safety guard for the chuck toolholder guard levelling bolts and plates tailstock quill reducer electric motor movement of tailstock low voltage machine lamp operating manual machine according to "CE" FURTHER TURNING LENGTHS: turning length3.000 mm € 115.920,- turning length4.000 mm € 123.600,- turning length5.000 mm € 133.940,- turning length6.000 mm € 149.440,-
            neu
            Bulgarien
            102070 €
            2031.19 €
            1090 mm
            1500 mm
            500 mm
            155 mm
            690 mm
            700 mm
            15
            160 M
            4
            3,7 - 15,6; 14,7 - 62; 58 U/Min
            160
            0.032 - 38.9 mm/U
            0.016 - 19.45 mm/U
            0.5 - 480 mm
            60 - 1/16 Gänge/"
            0.125 - 120
            Description :
            driven by variable speed control (4 steps)
            3-axes digital readout FAGOR with CSS (constant surface speed)
            quick change toolpostAmestra with 4 holders (3 square, 1 round)
            3-jaw chuck Bison 3204/DIN6350, Ø 500 mm
            spindle dead center
            coolant equipment
            full length rear splash guard
            leadscrew and shaft protection
            safety guard for the chuck
            toolholder guard
            levelling bolts and plates
            tailstock quill reducer
            electric motor movement of tailstock
            low voltage machine lamp
            operating manual
            machine according to "CE"

            FURTHER TURNING LENGTHS:

            turning length3.000 mm
            € 115.920,-

            turning length4.000 mm
            € 123.600,-

            turning length5.000 mm
            € 133.940,-

            turning length6.000 mm
            € 149.440,-
          Datasheet
          Request / Contact
          used  Center Lathe ZMM CU 800


          • HESSE+CO Maschinenfabrik GesmbH
          • Straße 4 Objekt 8
          • 2351 Wiener Neudorf
          • Österreich

          • +43/2236/638 70-0
            +43/2236/636 62
          • office@hesse-maschinen.com
            https://www.hesse-maschinen.com
          #1069-929 · Center Lathe

          ZMM - CU 800 - - -

          Technical details
          neuBulgarien86280 €︱ 1734.23 €︱ 890 mm︱ 1500 mm︱ 400 mm︱ 155 mm︱ 490 mm︱ 700 mm︱ 15160 M︱ 241600.032 - 38.9 mm/U︱ 0.016 - 19.45 mm/U︱ 0.5 - 480 mm︱ 60 - 1/16 Gänge/"︱ 0.125 - 120525 mm︱
          driven by manual transmission 3-axes digital readout quick change toolpostAmestra with 4 holders (3 square, 1 round) 3-jaw chuck Bison 3204/DIN6350, Ø 500 mm spindle dead center coolant equipment full length rear splash guard leadscrew and shaft protection safety guard for the chuck toolholder guard levelling bolts and plates tailstock quill reducer electric motor movement of tailstock low voltage machine lamp operating manual machine according to "CE" FURTHER TURNING LENGTHS: turning length2.000 mm € 89.420,- turning length3.000 mm € 99.400,- turning length4.000 mm € 106.810,- turning length5.000 mm € 116.900,- turning length6.000 mm € 132.130,-
            neu
            Bulgarien
            86280 €
            1734.23 €
            890 mm
            1500 mm
            400 mm
            155 mm
            490 mm
            700 mm
            15
            160 M
            24
            160
            0.032 - 38.9 mm/U
            0.016 - 19.45 mm/U
            0.5 - 480 mm
            60 - 1/16 Gänge/"
            0.125 - 120
            525 mm
            Description :
            driven by manual transmission
            3-axes digital readout
            quick change toolpostAmestra with 4 holders (3 square, 1 round)
            3-jaw chuck Bison 3204/DIN6350, Ø 500 mm
            spindle dead center
            coolant equipment
            full length rear splash guard
            leadscrew and shaft protection
            safety guard for the chuck
            toolholder guard
            levelling bolts and plates
            tailstock quill reducer
            electric motor movement of tailstock
            low voltage machine lamp
            operating manual
            machine according to "CE"

            FURTHER TURNING LENGTHS:

            turning length2.000 mm
            € 89.420,-

            turning length3.000 mm
            € 99.400,-

            turning length4.000 mm
            € 106.810,-

            turning length5.000 mm
            € 116.900,-

            turning length6.000 mm
            € 132.130,-
          Datasheet
          Request / Contact
          used  Center Lathe ZMM CU 630


          • HESSE+CO Maschinenfabrik GesmbH
          • Straße 4 Objekt 8
          • 2351 Wiener Neudorf
          • Österreich

          • +43/2236/638 70-0
            +43/2236/636 62
          • office@hesse-maschinen.com
            https://www.hesse-maschinen.com
          #1069-925 · Center Lathe

          ZMM - CU 630 - - -

          Technical details
          neuBulgarien49390 €︱ 1002.62 €︱ 630 mm︱ 2000 mm︱ 315 mm︱ 103 mm︱ 430 mm︱ 400 mm︱ 11120 M︱ 2112,5 - 1250 1/min︱ 1200.04 - 12 mm/U︱ 0.02 - 6 mm/U︱ 0.5 - 120 mm︱ 60 - 1/4 Gänge/"︱ 0.125 - 30
          driven by manual transmission 3-axes digital readout quick change toolpostAmestra with 4 holders (3 square, 1 round) 3-jaw chuck Bison 3204/DIN6350, Ø 315 mm spindle dead center longitudinal stop for 1 position coolant equipment full length rear splash guard leadscrew and shaft protection safety guard for the chuck toolholder guard levelling bolts and plates quick release tailstock low voltage machine lamp operating manual machine according to "CE" FURTHER TURNING LENGTHS: turning length1.000 mm € 46.620,- turning length1.500 mm € 47.600,- turning length3.000 mm € 53.540,- turning length4.000 mm € 58.630,- turning length5.000 mm € 72.500,-
            neu
            Bulgarien
            49390 €
            1002.62 €
            630 mm
            2000 mm
            315 mm
            103 mm
            430 mm
            400 mm
            11
            120 M
            21
            12,5 - 1250 1/min
            120
            0.04 - 12 mm/U
            0.02 - 6 mm/U
            0.5 - 120 mm
            60 - 1/4 Gänge/"
            0.125 - 30
            Description :
            driven by manual transmission
            3-axes digital readout
            quick change toolpostAmestra with 4 holders (3 square, 1 round)
            3-jaw chuck Bison 3204/DIN6350, Ø 315 mm
            spindle dead center
            longitudinal stop for 1 position
            coolant equipment
            full length rear splash guard
            leadscrew and shaft protection
            safety guard for the chuck
            toolholder guard
            levelling bolts and plates
            quick release tailstock
            low voltage machine lamp
            operating manual
            machine according to "CE"

            FURTHER TURNING LENGTHS:

            turning length1.000 mm
            € 46.620,-

            turning length1.500 mm
            € 47.600,-

            turning length3.000 mm
            € 53.540,-

            turning length4.000 mm
            € 58.630,-

            turning length5.000 mm
            € 72.500,-
          Datasheet
          Request / Contact
          used  Center Lathe ZMM CU 325 RD


          • HESSE+CO Maschinenfabrik GesmbH
          • Straße 4 Objekt 8
          • 2351 Wiener Neudorf
          • Österreich

          • +43/2236/638 70-0
            +43/2236/636 62
          • office@hesse-maschinen.com
            https://www.hesse-maschinen.com
          #1069-911 · Center Lathe

          ZMM - CU 325 RD - - -

          Technical details
          neuBulgarien23160 €︱ 474.78 €︱ 400 mm︱ 750 mm︱ 165 mm︱ 32 mm︱ 190 mm︱ 200 mm︱ 54,5 M︱ 285-405; 470-2200 U/Min︱ 480.006 - 1.77 mm/U︱ 0.003 - 0.885 mm/U︱ 0.1 - 28 mm︱ 0.1 - 1.754 - 70
          driven by variable speed control (2 steps) 3-axes digital readout FAGOR with CSS (constant surface speed) quick change toolpostAmestra with 4 holders (3 square, 1 round) 3-jaw chuck Bison 3204/DIN6350, Ø 160 mm spindle dead center coolant equipment full length rear splash guard leadscrew and shaft protection safety guard for the chuck toolholder guard levelling bolts and plates quick release tailstock low voltage machine lamp operating manual machine according to "CE" FURTHER TURNING LENGTHS: turning length1.000 mm € 23.480,-
            neu
            Bulgarien
            23160 €
            474.78 €
            400 mm
            750 mm
            165 mm
            32 mm
            190 mm
            200 mm
            5
            4,5 M
            2
            85-405; 470-2200 U/Min
            48
            0.006 - 1.77 mm/U
            0.003 - 0.885 mm/U
            0.1 - 28 mm
            0.1 - 1.75
            4 - 70
            Description :
            driven by variable speed control (2 steps)
            3-axes digital readout FAGOR with CSS (constant surface speed)
            quick change toolpostAmestra with 4 holders (3 square, 1 round)
            3-jaw chuck Bison 3204/DIN6350, Ø 160 mm
            spindle dead center
            coolant equipment
            full length rear splash guard
            leadscrew and shaft protection
            safety guard for the chuck
            toolholder guard
            levelling bolts and plates
            quick release tailstock
            low voltage machine lamp
            operating manual
            machine according to "CE"

            FURTHER TURNING LENGTHS:

            turning length1.000 mm
            € 23.480,-
          Datasheet
          Request / Contact
          used  Center Lathe ZMM CU 800 RD


          • HESSE+CO Maschinenfabrik GesmbH
          • Straße 4 Objekt 8
          • 2351 Wiener Neudorf
          • Österreich

          • +43/2236/638 70-0
            +43/2236/636 62
          • office@hesse-maschinen.com
            https://www.hesse-maschinen.com
          #1069-931 · Center Lathe

          ZMM - CU 800 RD - - -

          Technical details
          neuBulgarien96170 €︱ 1933.02 €︱ 890 mm︱ 1500 mm︱ 400 mm︱ 155 mm︱ 490 mm︱ 700 mm︱ 15160 M︱ 43,7 - 15,6; 14,7 - 62; 58 U/Min︱ 1600.032 - 38.9 mm/U︱ 0.016 - 19.45 mm/U︱ 0.5 - 480 mm︱ 60 - 1/16 Gänge/"︱ 0.125 - 120
          driven by variable speed control (4 steps) 3-axes digital readout FAGOR with CSS (constant surface speed) quick change toolpostAmestra with 4 holders (3 square, 1 round) 3-jaw chuck Bison 3204/DIN6350, Ø 500 mm spindle dead center coolant equipment full length rear splash guard leadscrew and shaft protection safety guard for the chuck toolholder guard levelling bolts and plates tailstock quill reducer electric motor movement of tailstock low voltage machine lamp operating manual machine according to "CE" FURTHER TURNING LENGTHS: turning length2.000 mm € 99.590,- turning length3.000 mm € 110.020,- turning length4.000 mm € 117.600,- turning length5.000 mm € 128.040,- turning length6.000 mm € 143.440,-
            neu
            Bulgarien
            96170 €
            1933.02 €
            890 mm
            1500 mm
            400 mm
            155 mm
            490 mm
            700 mm
            15
            160 M
            4
            3,7 - 15,6; 14,7 - 62; 58 U/Min
            160
            0.032 - 38.9 mm/U
            0.016 - 19.45 mm/U
            0.5 - 480 mm
            60 - 1/16 Gänge/"
            0.125 - 120
            Description :
            driven by variable speed control (4 steps)
            3-axes digital readout FAGOR with CSS (constant surface speed)
            quick change toolpostAmestra with 4 holders (3 square, 1 round)
            3-jaw chuck Bison 3204/DIN6350, Ø 500 mm
            spindle dead center
            coolant equipment
            full length rear splash guard
            leadscrew and shaft protection
            safety guard for the chuck
            toolholder guard
            levelling bolts and plates
            tailstock quill reducer
            electric motor movement of tailstock
            low voltage machine lamp
            operating manual
            machine according to "CE"

            FURTHER TURNING LENGTHS:

            turning length2.000 mm
            € 99.590,-

            turning length3.000 mm
            € 110.020,-

            turning length4.000 mm
            € 117.600,-

            turning length5.000 mm
            € 128.040,-

            turning length6.000 mm
            € 143.440,-
          Datasheet
          Request / Contact

          Lathe - cycle-controlled

          used  Lathe -  cycle-controlled ZMM LS 600 M


          • HESSE+CO Maschinenfabrik GesmbH
          • Straße 4 Objekt 8
          • 2351 Wiener Neudorf
          • Österreich

          • +43/2236/638 70-0
            +43/2236/636 62
          • office@hesse-maschinen.com
            https://www.hesse-maschinen.com
          #1069-2118 · Lathe - cycle-controlled

          ZMM - LS 600 M - - -

          Technical details
          neuca. 4 Monate ab AuftragseBulgarien68840 €︱ 1383.68 €︱ 600 mm︱ 1500 mm︱ 300 mm︱ 80 mm︱ 400 mm︱ 400 mm︱ 890 M︱ 320 - 100, 80 - 400, 400 - U/Min︱ max. 8 m/min︱ max. 8 m/min︱ 290 mm︱ 90 mm︱ 5 MK︱
          Fast and simple communication between the operator and the lathe. Simple workpieces are machined in the same way as on the universal lathe, but more efficient. Complicated workpieces are machined in the same way as on the universal lathe, but faster. Complicated workpieces are machined in the same way as on the CNC lathe, but easier. Based on the controller Schneider Magelis the intelligent, self-developed ZMM Sliven software leads the operator also without programming skills simple and fast to the finished workpiece. The interface is simple and with large icons, which is convenient in a specific work environment. The intuitive menu facilitates the transition to next screens and operations. Well visualized and structured cyclic operations,threads and steps. Possibility to set up the feeds, threads, etc. both mechanically and digitally (via the display). The manual, automatic and combined mode allows more precise operation compared to universal lathe. Easy transition from manual to automatic operation mode. ACCESSORIES: Siemens motor with Siemens Inverter (3 gear steps) CNC control Schneider Magelis Quick change tool post Amestra Multifix Typ C inkl. 4 Halter (3x Rechteck, 1 Rund) 3-jaw chuck Bison 3204/DIN6350, Ø 250 mm, max. 2500 r/min Spindle dead center Ball screw spindles for longitudinal and cross axes Coolant equipment Full length rear splash guard Spindle protection Splash guard for the chuck Levelling bols and shims Quick release tailstock Machine lamp Operating manual Machine according to "CE“ FURTHER TURNING LENGTHS: 1000 mm € 67.640,00 2000 mm € 70.240,00 3000 mm € 72.940,00 4000 mm € 75.840,00 5000 mm € 78.640,00
            neu
            ca. 4 Monate ab Auftragse
            Bulgarien
            68840 €
            1383.68 €
            600 mm
            1500 mm
            300 mm
            80 mm
            400 mm
            400 mm
            8
            90 M
            3
            20 - 100, 80 - 400, 400 - U/Min
            max. 8 m/min
            max. 8 m/min
            290 mm
            90 mm
            5 MK
            Description :
            Fast and simple communication between the operator and the lathe.
            Simple workpieces are machined in the same way as on the universal lathe, but more efficient.
            Complicated workpieces are machined in the same way as on the universal lathe, but faster.
            Complicated workpieces are machined in the same way as on the CNC lathe, but easier.
            Based on the controller Schneider Magelis the intelligent, self-developed ZMM Sliven software
            leads the operator also without programming skills simple and fast to the finished workpiece.
            The interface is simple and with large icons, which is convenient in a specific work environment.
            The intuitive menu facilitates the transition to next screens and operations.
            Well visualized and structured cyclic operations,threads and steps.
            Possibility to set up the feeds, threads, etc. both mechanically and digitally (via the display).
            The manual, automatic and combined mode allows more precise operation compared to universal lathe.
            Easy transition from manual to automatic operation mode.

            ACCESSORIES:
            Siemens motor with Siemens Inverter (3 gear steps)
            CNC control Schneider Magelis
            Quick change tool post Amestra Multifix Typ C inkl. 4 Halter (3x Rechteck, 1 Rund)
            3-jaw chuck Bison 3204/DIN6350, Ø 250 mm, max. 2500 r/min
            Spindle dead center
            Ball screw spindles for longitudinal and cross axes
            Coolant equipment
            Full length rear splash guard
            Spindle protection
            Splash guard for the chuck
            Levelling bols and shims
            Quick release tailstock
            Machine lamp
            Operating manual
            Machine according to "CE“

            FURTHER TURNING LENGTHS:

            1000 mm

            67.640,00

            2000 mm

            70.240,00

            3000 mm

            72.940,00

            4000 mm

            75.840,00

            5000 mm

            78.640,00
          Datasheet
          Request / Contact
          •   
          •   
          • 1  
          •   
          •   

          Hesse+co Maschinenfabrik Gesmbh Industriezentrum Nö-Süd  2351 - Wiener Neudorf Straße 4 Objekt 8  Österreich
          Hesse+co Maschinenfabrik Gesmbh Industriezentrum Nö-Süd

          Straße 4 Objekt 8



          Contact Trader


            Hesse+co Maschinenfabrik Gesmbh Industriezentrum Nö-Süd
           Straße 4 Objekt 8
            2351 - Wiener Neudorf
            Österreich
            +43/2236/638 70-0
            +43/2236/636 62
            office@hesse-maschinen.com
            https://www.hesse-maschinen.com
            Contact person:

           




          Machine category


          Abkantpresse - hydraulisch · Abwickelhaspel · Alu-Kreissäge · Ausklinkmaschine · Bandschleifmaschine · Bandsäge - horizontal · Blechentgratungsmaschine · Blechrundbiegemaschine - 3 Walzen · Blechrundbiegemaschine - 4 Walzen · Bohr- und Fräsmaschine · Bohrmaschine · Bügelsäge · Bördelmaschine · CNC Plasma-Schneidanlage · Doppelschleifbock · Doppelständerexzenterpresse · Doppelständerpresse - Hydraulisch · Dornrohrbiegemaschine · Drehmaschine - zyklengesteuert · Einständer - Richtpresse · Einständerpresse - Hydraulisch · Exzenterpressen - Einständer · Falzformer · Flachschleifmaschine · Horizontal - Bandsägeautomat · Hydraulische Lochstanze · Hydraulische Presse · Kaltkreissäge · Kreisschere · Laserschneidmaschine · Lochstanze · Längs- und Querteilanlage · Profilieranlage · Profilstahlschere · Radialbohrmaschine · Ring- Profil- Biegemaschine · Rohrausschleifer · Rohrbiegemaschine · Rollenbahnen / Anschlag-Systeme · Schweißtisch · Schwenkbiegemaschine · Sickenmaschine · Spitzendrehmaschine · Stanz- und Nibbelmaschine · Tafelschere - hydraulisch · Tafelschere - mechanisch · Tischbohrwerk · Topfschleifmaschine · Viersäulenpresse - Hydraulisch · Vorschubapparat · Wasserstrahlschneidanlage · Werkstattpresse - hydraulisch · Werkzeugfräsmaschine - Universal · Werkzeugschleifmaschine - Universal ·