European network of stockholding machinery dealers

Bitte einen Suchbegriff eingeben - Please enter a search term
Category:
    Manufacturer:
      Machines:
        Trader:

          VÖGTLE SERVICE GMBH - Stockist for used machines

          Machinelist:


          double-sided high speed press

          used  double-sided high speed press HAULICK RVD 40


          • VÖGTLE SERVICE GMBH
          • Friedhofstr. 115
          • 73054 Eislingen
          • Deutschland

          • +49 71 61 99 73- 0
            +49 71 61 99 73- 13
          • Thomas.Ruckh@voegtle.de
            www.voegtle.de
          #1050-083160 · double-sided high speed press

          HAULICK - RVD 40 - - 1978 - konventionell

          Technical details
          pressure 40 t︱stroke 8 - 50 mm︱no. of strokes 50 - 300 /min︱distance between columns 600 mm︱dayligth (stroke and adjustment up) 285 mm︱column travel -side 280 mm︱table surface area 590 x 500 mm︱hole in the table 590 x 40 - 100 mm︱table height over floor 860 mm︱ram surface 590 x 380 mm︱ram adjustment 80 mm︱material width 200 mm︱material thickness - 2,5 mm︱material cross-cut mm²︱feed length 160 mm︱power requirement 7,5 kW︱Weight t︱dimensions of the machine ca. 1,8 x 1,2 x 2,1 mxmxm︱height over floor m︱height under floor m︱
          permitted for automatic mode according to the German Safety Regulations (UVV) with infinitely variable drive, pneumatic clutch, motoric ram adjustment, pneumatic pincer feed (Haulick RZV 160 VA 2137) can be offered as follows: - without putting into operation (in need of overhaul) - with putting into operation and mechanical partly overhaul - with mechanical partly overhaul and new control Siemens S 7-1500 F
            pressure 40 t
            stroke 8 - 50 mm
            no. of strokes 50 - 300 /min
            distance between columns 600 mm
            dayligth (stroke and adjustment . 285 mm
            column travel -side 280 mm
            table surface area 590 x 500 mm
            hole in the table 590 x 40 - 100 mm
            table height over floor 860 mm
            ram surface 590 x 380 mm
            ram adjustment 80 mm
            material width 200 mm
            material thickness - 2,5 mm
            feed length 160 mm
            power requirement 7,5 kW
            dimensions of the machine ca. 1,8 x 1,2 x 2,1 mxmxm
            Description :
            permitted for automatic mode according to the German Safety Regulations (UVV)
            with infinitely variable drive, pneumatic clutch, motoric ram adjustment, pneumatic pincer feed (Haulick RZV 160 VA 2137)
            can be offered as follows:
            - without putting into operation (in need of overhaul)
            - with putting into operation and mechanical partly overhaul
            - with mechanical partly overhaul and new control Siemens S 7-1500 F
          Datasheet
          Request / Contact
          used  double-sided high speed press RASTER HR 150 NL/4S


          • VÖGTLE SERVICE GMBH
          • Friedhofstr. 115
          • 73054 Eislingen
          • Deutschland

          • +49 71 61 99 73- 0
            +49 71 61 99 73- 13
          • Thomas.Ruckh@voegtle.de
            www.voegtle.de
          #1050-153023 · double-sided high speed press

          RASTER - HR 150 NL/4S - - 1978 - konventionell

          Technical details
          pressure 150 t︱stroke fix 80 mm︱no. of strokes 30 - 150 /min︱distance between columns 930 mm︱dayligth (stroke and adjustment up) 400 mm︱column travel -side 650 mm︱table surface area 880x1300 / 1500x600 mm︱hole in the table 760 x 180 mm︱table height over floor 1270 mm︱ram surface 920x1000 / 1300x600 mm︱Weight 27,5 t︱dimensions of the machine ca. 3,1 x 1,8 x 4,3 mxmxm︱
          permitted for automatic mode according to the German Safety Regulations (UVV) with infinitely variable drive, pneumatic clutch/brake combination, fix stroke, motoric ram adjustment, pneumatic counterbalance in ram, centralized lubrication, WITHOUT feeder
            pressure 150 t
            stroke fix 80 mm
            no. of strokes 30 - 150 /min
            distance between columns 930 mm
            dayligth (stroke and adjustment . 400 mm
            column travel -side 650 mm
            table surface area 880x1300 / 1500x600 mm
            hole in the table 760 x 180 mm
            table height over floor 1270 mm
            ram surface 920x1000 / 1300x600 mm
            Weight 27,5 t
            dimensions of the machine ca. 3,1 x 1,8 x 4,3 mxmxm
            Description :
            permitted for automatic mode according to the German Safety Regulations (UVV)
            with infinitely variable drive, pneumatic clutch/brake combination, fix stroke, motoric ram adjustment, pneumatic counterbalance in ram, centralized lubrication, WITHOUT feeder
          Datasheet
          Request / Contact
          used  double-sided high speed press SCHULER SA 125


          • VÖGTLE SERVICE GMBH
          • Friedhofstr. 115
          • 73054 Eislingen
          • Deutschland

          • +49 71 61 99 73- 0
            +49 71 61 99 73- 13
          • Thomas.Ruckh@voegtle.de
            www.voegtle.de
          #1050-033097 · double-sided high speed press

          SCHULER - SA 125 - - 1977 - konventionell

          Technical details
          pressure 125 t︱distance between columns 1150 mm︱stroke fix 25 mm︱no. of strokes 70 - 700 Hub/min︱dayligth (stroke and adjustment up) 400 mm︱column travel -side 650 mm︱table surface area 1150 x 1000 mm︱hole in the table 900 x 220 mm︱table height over floor 1500 mm︱ram surface 990 x 850 mm︱ram adjustment 60 mm︱power requirement 46,5 kW︱Weight 29,5 t︱dimensions of the machine (WxDxH) 3,3 x 1,8 x 4,7 m︱
          permitted for automatic mode according to the German Safety Regulations (UVV) with infinitely variable drive, mechanical roll feed (make Schuler, Type WK 8-250) can be offered without putting into operation (partly dismantled) or alternatively with new control Siemens S 7-1500 F
            pressure 125 t
            distance between columns 1150 mm
            stroke fix 25 mm
            no. of strokes 70 - 700 Hub/min
            dayligth (stroke and adjustment . 400 mm
            column travel -side 650 mm
            table surface area 1150 x 1000 mm
            hole in the table 900 x 220 mm
            table height over floor 1500 mm
            ram surface 990 x 850 mm
            ram adjustment 60 mm
            power requirement 46,5 kW
            Weight 29,5 t
            dimensions of the machine (WxDxH. 3,3 x 1,8 x 4,7 m
            Description :
            permitted for automatic mode according to the German Safety Regulations (UVV)
            with infinitely variable drive, mechanical roll feed (make Schuler, Type WK 8-250)
            can be offered without putting into operation (partly dismantled) or alternatively with new control Siemens S 7-1500 F
          Datasheet
          Request / Contact
          used  double-sided high speed press WEINGARTEN DE 200.15


          • VÖGTLE SERVICE GMBH
          • Friedhofstr. 115
          • 73054 Eislingen
          • Deutschland

          • +49 71 61 99 73- 0
            +49 71 61 99 73- 13
          • Thomas.Ruckh@voegtle.de
            www.voegtle.de
          #1050-183053 · double-sided high speed press

          WEINGARTEN - DE 200.15 - - 1976 - konventionell

          Technical details
          pressure 200 t︱distance between columns 1550 mm︱stroke 30 - 160 mm︱no. of strokes 30 - 90 Hub/min︱dayligth (stroke and adjustment up) 745 mm︱column travel -side 800 mm︱table surface area 1500 x 1150 mm︱hole in the table 450 mm︱table height over floor 810 mm︱ram surface 1500 x 1000 mm︱power requirement 38,0 kW︱weight of the machine ca. 26,5 t︱required space 5,1 x 1,6 x 3,7 m︱ram adjustment 110 mm︱
          permitted for automatic mode according to the German Safety Regulations (UVV) with infinitely variable drive, pneumatic clutch/brake combination (Ortlinghaus), hydraulic overload protection in ram, pneumatic counterbalance in ram, motoric ram adjustment can be offered without putting into operation or alternatively with new control Siemens S 7-1500 F
            pressure 200 t
            distance between columns 1550 mm
            stroke 30 - 160 mm
            no. of strokes 30 - 90 Hub/min
            dayligth (stroke and adjustment . 745 mm
            column travel -side 800 mm
            table surface area 1500 x 1150 mm
            hole in the table 450 mm
            table height over floor 810 mm
            ram surface 1500 x 1000 mm
            power requirement 38,0 kW
            weight of the machine ca. 26,5 t
            required space 5,1 x 1,6 x 3,7 m
            ram adjustment 110 mm
            Description :
            permitted for automatic mode according to the German Safety Regulations (UVV)
            with infinitely variable drive, pneumatic clutch/brake combination (Ortlinghaus), hydraulic overload protection in ram, pneumatic counterbalance in ram, motoric ram adjustment
            can be offered without putting into operation or alternatively with new control Siemens S 7-1500 F
          Datasheet
          Request / Contact

          Drawing Press - 1-Col.Hydr.

          used  Drawing Press - 1-Col.Hydr. PME PHY 250 C


          • VÖGTLE SERVICE GMBH
          • Friedhofstr. 115
          • 73054 Eislingen
          • Deutschland

          • +49 71 61 99 73- 0
            +49 71 61 99 73- 13
          • Thomas.Ruckh@voegtle.de
            www.voegtle.de
          #1050-233023V · Drawing Press - 1-Col.Hydr.

          PME - PHY 250 C - - 2007 - Siemens S 7

          Technical details
          pressure 250 t︱stroke 600 mm︱throat 360 mm︱dayligth 800 mm︱table surface area 1400 x 700 mm︱table height over floor 1030 mm︱ram surface 1100 X 600 mm︱feed down 300 mm/s︱feed up 480 mm/s︱working feed 69 mm/s︱oil volume l︱power requirement 55,0 kW︱Weight 11,0 t︱dimensions of the machine ca. 2,2 x 3,2 x 3,4 m︱
          permitted for manual loading according to the CE-norm with oil-hydraulic drive, controllable dependent on way, light-guard (Sick) on front new, two-hand operation
            pressure 250 t
            stroke 600 mm
            throat 360 mm
            dayligth 800 mm
            table surface area 1400 x 700 mm
            table height over floor 1030 mm
            ram surface 1100 X 600 mm
            feed down 300 mm/s
            feed up 480 mm/s
            working feed 69 mm/s
            power requirement 55,0 kW
            Weight 11,0 t
            dimensions of the machine ca. 2,2 x 3,2 x 3,4 m
            Description :
            permitted for manual loading according to the CE-norm
            with oil-hydraulic drive, controllable dependent on way, light-guard (Sick) on front new, two-hand operation
          Datasheet
          Request / Contact
          used  Drawing Press - 1-Col.Hydr. MUELLER CEZ 63.5.10 (UVV)


          • VÖGTLE SERVICE GMBH
          • Friedhofstr. 115
          • 73054 Eislingen
          • Deutschland

          • +49 71 61 99 73- 0
            +49 71 61 99 73- 13
          • Thomas.Ruckh@voegtle.de
            www.voegtle.de
          #1050-133027 · Drawing Press - 1-Col.Hydr.

          MUELLER - CEZ 63.5.10 (UVV) - - 1991 - konventionell

          Technical details
          pressure 63 t︱throat 325 mm︱stroke 560 mm︱dayligth 700 mm︱table surface area 640 x 640 mm︱die cushion capacity 25 t︱die cushion stroke 200 mm︱die cushion area 450 x 450 mm︱table height over floor 800 mm︱ram surface 560 x 560 mm︱oil volume 450 l︱total power requirement 15,0 kW︱weight of the machine ca. 7,0 t︱required space 1,2 x 2,0 x 3,1 m︱
          year of manufacture 1971 overhaul 1991 permitted for manual loading according to the German Safety Regulations (UVV) with oil-hydraulic drive, hydraulic drawing cushion in table, two-hand operation press can be inspected in running condition in our warehouse
            pressure 63 t
            throat 325 mm
            stroke 560 mm
            dayligth 700 mm
            table surface area 640 x 640 mm
            die cushion capacity 25 t
            die cushion stroke 200 mm
            die cushion area 450 x 450 mm
            table height over floor 800 mm
            ram surface 560 x 560 mm
            oil volume 450 l
            total power requirement 15,0 kW
            weight of the machine ca. 7,0 t
            required space 1,2 x 2,0 x 3,1 m
            Description :
            year of manufacture 1971
            overhaul 1991
            permitted for manual loading according to the German Safety Regulations (UVV)
            with oil-hydraulic drive, hydraulic drawing cushion in table, two-hand operation
            press can be inspected in running condition in our warehouse
          Datasheet
          Request / Contact
          used  Drawing Press - 1-Col.Hydr. LAUFFER EZU 100 (UVV)


          • VÖGTLE SERVICE GMBH
          • Friedhofstr. 115
          • 73054 Eislingen
          • Deutschland

          • +49 71 61 99 73- 0
            +49 71 61 99 73- 13
          • Thomas.Ruckh@voegtle.de
            www.voegtle.de
          #1050-103057 · Drawing Press - 1-Col.Hydr.

          LAUFFER - EZU 100 (UVV) - - 1989 - konventionell

          Technical details
          pressure 100 t︱stroke 560 mm︱throat 540 mm︱dayligth 800 mm︱table surface area 1000 x 1000 mm︱die cushion capacity 50 t︱die cushion stroke 200 mm︱die cushion area 710 x 650 mm︱table height over floor 910 mm︱ram surface 1000 x 1000 mm︱feed down 400 mm/s︱feed up 300 mm/s︱working feed 57,7 mm/s︱oil volume 650 l︱power requirement 37,5 kW︱Weight 15,0 t︱dimensions of the machine ca. 1,5 x 2,5 x 4,45 mxmxm︱
          permitted for manual loading according to the German Safety Regulations (UVV) with oil-hydraulic drive, hydraulic drawing cushion / ejector in table, ejector in ram (2 t / 200 mm), cutting impact cushioning, mechanical depth stop, two-hand operation
            pressure 100 t
            stroke 560 mm
            throat 540 mm
            dayligth 800 mm
            table surface area 1000 x 1000 mm
            die cushion capacity 50 t
            die cushion stroke 200 mm
            die cushion area 710 x 650 mm
            table height over floor 910 mm
            ram surface 1000 x 1000 mm
            feed down 400 mm/s
            feed up 300 mm/s
            working feed 57,7 mm/s
            oil volume 650 l
            power requirement 37,5 kW
            Weight 15,0 t
            dimensions of the machine ca. 1,5 x 2,5 x 4,45 mxmxm
            Description :
            permitted for manual loading according to the German Safety Regulations (UVV)
            with oil-hydraulic drive, hydraulic drawing cushion / ejector in table, ejector in ram (2 t / 200 mm), cutting impact cushioning, mechanical depth stop, two-hand operation
          Datasheet
          Request / Contact
          used  Drawing Press - 1-Col.Hydr. SMG CSZ 63


          • VÖGTLE SERVICE GMBH
          • Friedhofstr. 115
          • 73054 Eislingen
          • Deutschland

          • +49 71 61 99 73- 0
            +49 71 61 99 73- 13
          • Thomas.Ruckh@voegtle.de
            www.voegtle.de
          #1050-113030 · Drawing Press - 1-Col.Hydr.

          SMG - CSZ 63 - - 1979 - konventionell

          Technical details
          pressure 63 t︱stroke 200 mm︱throat 320 mm︱dayligth 450 mm︱table surface area 750 x 600 mm︱die cushion capacity 6,5 t︱die cushion stroke 80 mm︱die cushion area 240 mm︱table height over floor 800 mm︱ram surface 500 x 450 mm︱feed down 300 mm/s︱feed up 300 mm/s︱working feed 50 mm/s︱oil volume 380 l︱power requirement 12,0 kW︱Weight 6,5 t︱dimensions of the machine ca. 1,3 x 2,0 x 2,75 mxmxm︱
          with oil-hydraulic drive, hydraulic drawing cushion in table, hydraulic ejector in ram (approx. 0,5 t / 70 mm), hydraulic cutting impact cushioning, mechanical depth stop
            pressure 63 t
            stroke 200 mm
            throat 320 mm
            dayligth 450 mm
            table surface area 750 x 600 mm
            die cushion capacity 6,5 t
            die cushion stroke 80 mm
            die cushion area 240 mm
            table height over floor 800 mm
            ram surface 500 x 450 mm
            feed down 300 mm/s
            feed up 300 mm/s
            working feed 50 mm/s
            oil volume 380 l
            power requirement 12,0 kW
            Weight 6,5 t
            dimensions of the machine ca. 1,3 x 2,0 x 2,75 mxmxm
            Description :
            with oil-hydraulic drive, hydraulic drawing cushion in table, hydraulic ejector in ram (approx. 0,5 t / 70 mm), hydraulic cutting impact cushioning, mechanical depth stop
          Datasheet
          Request / Contact
          used  Drawing Press - 1-Col.Hydr. SMG CS 100 (UVV)


          • VÖGTLE SERVICE GMBH
          • Friedhofstr. 115
          • 73054 Eislingen
          • Deutschland

          • +49 71 61 99 73- 0
            +49 71 61 99 73- 13
          • Thomas.Ruckh@voegtle.de
            www.voegtle.de
          #1050-183027 · Drawing Press - 1-Col.Hydr.

          SMG - CS 100 (UVV) - - 1978 - konventionell

          Technical details
          pressure 100 t︱stroke 150 mm︱throat 345 mm︱dayligth 400 mm︱table surface area 1200 x 600 mm︱table height over floor 850 mm︱ram surface 560 x 500 mm︱feed down 350 mm/s︱feed up 350 mm/s︱working feed 25 mm/s︱oil volume 560 l︱power requirement 22,0 kW︱Weight 8,3 t︱dimensions of the machine ca. 2,1 x 1,7 x 2,8 mxmxm︱
          permitted for manual loading according to the German Safety Regulations (UVV) with oil-hydraulic drive, mechanical depth stop
            pressure 100 t
            stroke 150 mm
            throat 345 mm
            dayligth 400 mm
            table surface area 1200 x 600 mm
            table height over floor 850 mm
            ram surface 560 x 500 mm
            feed down 350 mm/s
            feed up 350 mm/s
            working feed 25 mm/s
            oil volume 560 l
            power requirement 22,0 kW
            Weight 8,3 t
            dimensions of the machine ca. 2,1 x 1,7 x 2,8 mxmxm
            Description :
            permitted for manual loading according to the German Safety Regulations (UVV)
            with oil-hydraulic drive, mechanical depth stop
          Datasheet
          Request / Contact
          used  Drawing Press - 1-Col.Hydr. MUELLER CEZ 200.2.1


          • VÖGTLE SERVICE GMBH
          • Friedhofstr. 115
          • 73054 Eislingen
          • Deutschland

          • +49 71 61 99 73- 0
            +49 71 61 99 73- 13
          • Thomas.Ruckh@voegtle.de
            www.voegtle.de
          #1050-063212 · Drawing Press - 1-Col.Hydr.

          MUELLER - CEZ 200.2.1 - - 1977 - konventionell

          Technical details
          pressure 200 t︱stroke 560 mm︱throat 360 mm︱dayligth 780 mm︱table surface area 740 x 720 mm︱die cushion capacity 80 t︱die cushion stroke 200 mm︱die cushion area 530 x 530 mm︱table height over floor 920 mm︱ram surface 560 x 560 mm︱oil volume l︱power requirement 35,0 kW︱Weight 10,0 t︱dimensions of the machine ca. 1,3 x 2,0 x 3,4 mxmxm︱
          permitted for manual loading according to the German Safety Regulations (UVV) with oil-hydraulic drive, controllable dependent on pressure/time and way, hydraulic drawing cushion in table
            pressure 200 t
            stroke 560 mm
            throat 360 mm
            dayligth 780 mm
            table surface area 740 x 720 mm
            die cushion capacity 80 t
            die cushion stroke 200 mm
            die cushion area 530 x 530 mm
            table height over floor 920 mm
            ram surface 560 x 560 mm
            power requirement 35,0 kW
            Weight 10,0 t
            dimensions of the machine ca. 1,3 x 2,0 x 3,4 mxmxm
            Description :
            permitted for manual loading according to the German Safety Regulations (UVV)
            with oil-hydraulic drive, controllable dependent on pressure/time and way, hydraulic drawing cushion in table
          Datasheet
          Request / Contact

          Eccentric Press - Single Column

          used  Eccentric Press - Single Column SCHULER PDR 200/450


          • VÖGTLE SERVICE GMBH
          • Friedhofstr. 115
          • 73054 Eislingen
          • Deutschland

          • +49 71 61 99 73- 0
            +49 71 61 99 73- 13
          • Thomas.Ruckh@voegtle.de
            www.voegtle.de
          #1050-233008 · Eccentric Press - Single Column

          SCHULER - PDR 200/450 - - 2009 - Siemens S 7

          Technical details
          pressure 200 t︱stroke 30 - 140 mm︱no. of strokes 40 /min︱throat 450 mm︱passage to the back 425 mm︱dayligth 630 mm︱table surface area 1020 x 880 mm︱hole in the table 540 / 500 mm︱table height over floor 800 mm︱ram surface 800 x 500 mm︱ram adjustment 125 mm︱power requirement 15,0 kW︱Weight 13,8 t︱dimensions of the machine ca. 2,2 x 2,35 x 3,43 m x m x m︱
          year of manufacture 1970 2009: modernization of electrical control (Siemens S 7) and modification of clutch-brake combination Ortlinghaus permitted for manual loading according to the German Safety Regulations (UVV) with motor, pneumatic clutch/brake combination (Ortlinghaus), mechanical overload protection in ram, manual stroke adjustment, motoric ram adjustment, pneumatic counterbalance in ram, fix table, motoric centralized lubrication, two-hand operation
            pressure 200 t
            stroke 30 - 140 mm
            no. of strokes 40 /min
            throat 450 mm
            passage to the back 425 mm
            dayligth 630 mm
            table surface area 1020 x 880 mm
            hole in the table 540 / 500 mm
            table height over floor 800 mm
            ram surface 800 x 500 mm
            ram adjustment 125 mm
            power requirement 15,0 kW
            Weight 13,8 t
            dimensions of the machine ca. 2,2 x 2,35 x 3,43 m x m x m
            Description :
            year of manufacture 1970
            2009: modernization of electrical control (Siemens S 7) and modification of clutch-brake combination Ortlinghaus
            permitted for manual loading according to the German Safety Regulations (UVV)
            with motor, pneumatic clutch/brake combination (Ortlinghaus), mechanical overload protection in ram, manual stroke adjustment, motoric ram adjustment, pneumatic counterbalance in ram, fix table, motoric centralized lubrication, two-hand operation
          Datasheet
          Request / Contact
          used  Eccentric Press - Single Column BEUTLER NOVA CR 2500


          • VÖGTLE SERVICE GMBH
          • Friedhofstr. 115
          • 73054 Eislingen
          • Deutschland

          • +49 71 61 99 73- 0
            +49 71 61 99 73- 13
          • Thomas.Ruckh@voegtle.de
            www.voegtle.de
          #1050-233048 · Eccentric Press - Single Column

          BEUTLER - NOVA CR 2500 - - 2003 - Pilz PNOZ

          Technical details
          pressure 250 t︱stroke 20 - 190 mm︱no. of strokes 25 - 140 /min︱throat 460 mm︱passage to the back 590 mm︱dayligth 690 mm︱table surface area 1500 x 880 mm︱hole in the table 950 x 250 mm︱table height over floor 900 mm︱ram surface 870 x 725 mm︱ram adjustment 120 mm︱power requirement 30,0 kW︱Weight 32,0 t︱dimensions of the machine ca. 2,34 x 2,38 x 3,99 m x m x m︱
          permitted for manual loading and automatic mode according to the CE-norm with infinitely variable drive, light guard (make Sick), hydraulic clutch/brake combination, hydraulic overload protection in ram, automatic stroke adjustment, motoric ram adjustment, pneumatic counterbalance in ram, fix table, drawing cushion in table (20 t), motoric centralized lubrication, operator's console with two-hand operation Width between the tie rods in front 940 mm Side passage 900 mm
            pressure 250 t
            stroke 20 - 190 mm
            no. of strokes 25 - 140 /min
            throat 460 mm
            passage to the back 590 mm
            dayligth 690 mm
            table surface area 1500 x 880 mm
            hole in the table 950 x 250 mm
            table height over floor 900 mm
            ram surface 870 x 725 mm
            ram adjustment 120 mm
            power requirement 30,0 kW
            Weight 32,0 t
            dimensions of the machine ca. 2,34 x 2,38 x 3,99 m x m x m
            Description :
            permitted for manual loading and automatic mode according to the CE-norm
            with infinitely variable drive, light guard (make Sick), hydraulic clutch/brake combination, hydraulic overload protection in ram, automatic stroke adjustment, motoric ram adjustment, pneumatic counterbalance in ram, fix table, drawing cushion in table (20 t), motoric centralized lubrication, operator's console with two-hand operation
            Width between the tie rods in front 940 mm
            Side passage 900 mm
          Datasheet
          Request / Contact
          used  Eccentric Press - Single Column HENSEL EBU SKE 75 FU (UVV)


          • VÖGTLE SERVICE GMBH
          • Friedhofstr. 115
          • 73054 Eislingen
          • Deutschland

          • +49 71 61 99 73- 0
            +49 71 61 99 73- 13
          • Thomas.Ruckh@voegtle.de
            www.voegtle.de
          #1050-193029V · Eccentric Press - Single Column

          HENSEL - EBU SKE 75 FU (UVV) - - 2000 - konventionell

          Technical details
          pressure 075 t︱throat 295 mm︱stroke 16 - 140 mm︱Stroke rate 75 / min︱Distance table/ram, max. stroke up, adjustment up 450 mm︱Table surface area 800 x 595 mm︱Hole in the table 330 x 230 mm︱Table height above floor 745 mm︱Ram surface 470 x 180 mm︱Ram adjustment 80 mm︱Power capacity 5,5 kW︱Weight 5,0 t︱Dimensions (WxDxH) 1,5 x 2,5 x 2,5 m︱
          overhaul 2000 permitted for manual put-in according to the German Safety Regulations (UVV) with pneumatic clutch, mechanical overload protection in ram, two-hand operation press can be inspected in running condition in our warehouse
            pressure 075 t
            throat 295 mm
            stroke 16 - 140 mm
            Stroke rate 75 / min
            Distance table/ram, max. stroke . 450 mm
            Table surface area 800 x 595 mm
            Hole in the table 330 x 230 mm
            Table height above floor 745 mm
            Ram surface 470 x 180 mm
            Ram adjustment 80 mm
            Power capacity 5,5 kW
            Weight 5,0 t
            Dimensions (WxDxH) 1,5 x 2,5 x 2,5 m
            Description :
            overhaul 2000
            permitted for manual put-in according to the German Safety Regulations (UVV)
            with pneumatic clutch, mechanical overload protection in ram, two-hand operation
            press can be inspected in running condition in our warehouse
          Datasheet
          Request / Contact
          used  Eccentric Press - Single Column BEUTLER P 95 - C 630 (CE)


          • VÖGTLE SERVICE GMBH
          • Friedhofstr. 115
          • 73054 Eislingen
          • Deutschland

          • +49 71 61 99 73- 0
            +49 71 61 99 73- 13
          • Thomas.Ruckh@voegtle.de
            www.voegtle.de
          #1050-193050V · Eccentric Press - Single Column

          BEUTLER - P 95 - C 630 (CE) - - 1995 - konventionell

          Technical details
          pressure 063 t︱throat 260 mm︱stroke 12 - 120 mm︱Stroke rate 30 - 130 / min︱Distance table/ram, max. stroke up, adjustment up 495 mm︱Table surface area 800 x 560 mm︱Hole in the table 220 mm︱table height over floor 800 mm︱Passage to the back 270 mm︱Ram surface 450 x 360 mm︱Ram adjustment 120 mm︱Power capacity 5,5 kW︱Weight 5,0 t︱Dimensions (WxDxH) 1,8 x 1,5 x 2,7 m︱
          permitted for automatic mode according to the CE Regulations with infinitely variable drive, pneumatic clutch/brake combination, mechanical overload protection in ram, two-hand operation Option: roll feed Zehnder&Sommer (price on request) can be inspected in running condition in our warehouse
            pressure 063 t
            throat 260 mm
            stroke 12 - 120 mm
            Stroke rate 30 - 130 / min
            Distance table/ram, max. stroke . 495 mm
            Table surface area 800 x 560 mm
            Hole in the table 220 mm
            table height over floor 800 mm
            Passage to the back 270 mm
            Ram surface 450 x 360 mm
            Ram adjustment 120 mm
            Power capacity 5,5 kW
            Weight 5,0 t
            Dimensions (WxDxH) 1,8 x 1,5 x 2,7 m
            Description :
            permitted for automatic mode according to the CE Regulations
            with infinitely variable drive, pneumatic clutch/brake combination, mechanical overload protection in ram, two-hand operation
            Option: roll feed Zehnder&Sommer (price on request)
            can be inspected in running condition in our warehouse
          Datasheet
          Request / Contact
          used  Eccentric Press - Single Column DIRINLER CDCS 2500 P (CE)


          • VÖGTLE SERVICE GMBH
          • Friedhofstr. 115
          • 73054 Eislingen
          • Deutschland

          • +49 71 61 99 73- 0
            +49 71 61 99 73- 13
          • Thomas.Ruckh@voegtle.de
            www.voegtle.de
          #1050-073145 · Eccentric Press - Single Column

          DIRINLER - CDCS 2500 P (CE) - - 1995 - konventionell

          Technical details
          Pressure 250 t︱throat 450 mm︱stroke 8 - 135 mm︱no. of strokes 50 /min︱distance table/ram, max. stroke up, adjustment up 635 mm︱table surface area 1250 x 850 mm︱hole in the table 355 mm︱table height over floor 950 mm︱passage to the back 660 mm︱ram surface 790 x 610 mm︱ram adjustment 120 mm︱power requirement 18,5 kW︱weight 14,0 t︱Dimensions (WxDxH) 1,5 x 2,8 x 3,65 m︱
          permitted for manual put-in according to the CE Regulations with pneumatic clutch, mechanical overload protection in ram, pneumatic counterbalance in ram, two-hand operation machine is in operation in our warehouse; can be offered alternatively with new control
            Pressure 250 t
            throat 450 mm
            stroke 8 - 135 mm
            no. of strokes 50 /min
            distance table/ram, max. stroke . 635 mm
            table surface area 1250 x 850 mm
            hole in the table 355 mm
            table height over floor 950 mm
            passage to the back 660 mm
            ram surface 790 x 610 mm
            ram adjustment 120 mm
            power requirement 18,5 kW
            weight 14,0 t
            Dimensions (WxDxH) 1,5 x 2,8 x 3,65 m
            Description :
            permitted for manual put-in according to the CE Regulations
            with pneumatic clutch, mechanical overload protection in ram, pneumatic counterbalance in ram, two-hand operation
            machine is in operation in our warehouse; can be offered alternatively with new control
          Datasheet
          Request / Contact
          used  Eccentric Press - Single Column WEINGARTEN EXP 80 SV DK


          • VÖGTLE SERVICE GMBH
          • Friedhofstr. 115
          • 73054 Eislingen
          • Deutschland

          • +49 71 61 99 73- 0
            +49 71 61 99 73- 13
          • Thomas.Ruckh@voegtle.de
            www.voegtle.de
          #1050-223036 · Eccentric Press - Single Column

          WEINGARTEN - EXP 80 SV DK - - 1993 - konventionell

          Technical details
          pressure 80 t︱throat 280 mm︱stroke 10 - 140 mm︱Stroke rate 85 / min︱Distance table/ram, max. stroke up, adjustment up 380 mm︱Table surface area 850 x 560 mm︱Hole in the table 300 x 200 mm︱Table height above floor 790 - 950 mm︱Ram surface 420 x 210 mm︱Ram adjustment 60 mm︱Power capacity 4,0 kW︱Weight 4,5 t︱Dimensions (WxDxH) 1,3 x 1,4 x 2,45 m︱
          permitted only for safe tools or fixed screen according to the German Safety Regulations (UVV) with motor, rolling-key clutch, mechanical overload protection in ram, manual stroke adjustment, manual ram adjustment, adjustable table, manual centralized lubrication, foot operation can be inspected in running condition in our warehouse
            pressure 80 t
            throat 280 mm
            stroke 10 - 140 mm
            Stroke rate 85 / min
            Distance table/ram, max. stroke . 380 mm
            Table surface area 850 x 560 mm
            Hole in the table 300 x 200 mm
            Table height above floor 790 - 950 mm
            Ram surface 420 x 210 mm
            Ram adjustment 60 mm
            Power capacity 4,0 kW
            Weight 4,5 t
            Dimensions (WxDxH) 1,3 x 1,4 x 2,45 m
            Description :
            permitted only for safe tools or fixed screen according to the German Safety Regulations (UVV)
            with motor, rolling-key clutch, mechanical overload protection in ram, manual stroke adjustment, manual ram adjustment, adjustable table, manual centralized lubrication, foot operation
            can be inspected in running condition in our warehouse
          Datasheet
          Request / Contact
          used  Eccentric Press - Single Column SCHULER PDR 160/400 (UVV)


          • VÖGTLE SERVICE GMBH
          • Friedhofstr. 115
          • 73054 Eislingen
          • Deutschland

          • +49 71 61 99 73- 0
            +49 71 61 99 73- 13
          • Thomas.Ruckh@voegtle.de
            www.voegtle.de
          #1050-163073V · Eccentric Press - Single Column

          SCHULER - PDR 160/400 (UVV) - - 1993 - konventionell

          Technical details
          pressure 160 t︱throat 400 mm︱stroke 30 - 200 mm︱no. of strokes 50 /min︱distance table/ram, max. stroke up, adjustment up 600 mm︱table surface area 1000 x 770 mm︱table height over floor 810 mm︱hole in the table 360 mm︱Passage to the back 450 mm︱ram surface 710 x 450 mm︱ram adjustment 110 mm︱power requirement 15,0 kW︱weight 10,5 t︱Dimensions (WxDxH) 1,7 x 2,0 x 3,2 m︱
          year of manufacture 1969 overhaul 1993 permitted for manual put-in according to the German Safety Regulations (UVV) with hydraulic clutch, mechanical overload protection in ram, pneumatic counterbalance in ram, two-hand operation can be offered without putting into operation, with putting into operation in given condition or alternatively with new control Siemens S 7-1500 F
            pressure 160 t
            throat 400 mm
            stroke 30 - 200 mm
            no. of strokes 50 /min
            distance table/ram, max. stroke . 600 mm
            table surface area 1000 x 770 mm
            table height over floor 810 mm
            hole in the table 360 mm
            Passage to the back 450 mm
            ram surface 710 x 450 mm
            ram adjustment 110 mm
            power requirement 15,0 kW
            weight 10,5 t
            Dimensions (WxDxH) 1,7 x 2,0 x 3,2 m
            Description :
            year of manufacture 1969
            overhaul 1993
            permitted for manual put-in according to the German Safety Regulations (UVV)
            with hydraulic clutch, mechanical overload protection in ram, pneumatic counterbalance in ram, two-hand operation
            can be offered without putting into operation, with putting into operation in given condition or alternatively with new control Siemens S 7-1500 F
          Datasheet
          Request / Contact
          used  Eccentric Press - Single Column HEILBRONN REP 80 (UVV)


          • VÖGTLE SERVICE GMBH
          • Friedhofstr. 115
          • 73054 Eislingen
          • Deutschland

          • +49 71 61 99 73- 0
            +49 71 61 99 73- 13
          • Thomas.Ruckh@voegtle.de
            www.voegtle.de
          #1050-113134 · Eccentric Press - Single Column

          HEILBRONN - REP 80 (UVV) - - 1992 - konventionell

          Technical details
          Pressure 080 t︱throat 300 mm︱stroke 8 - 100 mm︱no. of strokes 60 /min︱distance table/ram, max. stroke up, adjustment up 440 mm︱table surface area 720 x 600 mm︱hole in the table 300 x 175 mm︱table height over floor 860 mm︱ram surface 400 x 270 mm︱ram adjustment 60 mm︱power requirement 7,5 kW︱weight 6,0 t︱dimensions (WxDxH) 1,3 x 2,2 x 3,05 m︱
          permitted for manual put-in according to the German Safety Regulations (UVV) with hydraulic clutch/brake combination (make Ortlinghaus), hydraulic overload protection in ram, pneumatic counterbalance in ram, motoric ram adjustment, two-hand and foot operation
            Pressure 080 t
            throat 300 mm
            stroke 8 - 100 mm
            no. of strokes 60 /min
            distance table/ram, max. stroke . 440 mm
            table surface area 720 x 600 mm
            hole in the table 300 x 175 mm
            table height over floor 860 mm
            ram surface 400 x 270 mm
            ram adjustment 60 mm
            power requirement 7,5 kW
            weight 6,0 t
            dimensions (WxDxH) 1,3 x 2,2 x 3,05 m
            Description :
            permitted for manual put-in according to the German Safety Regulations (UVV)
            with hydraulic clutch/brake combination (make Ortlinghaus), hydraulic overload protection in ram, pneumatic counterbalance in ram, motoric ram adjustment, two-hand and foot operation
          Datasheet
          Request / Contact
          used  Eccentric Press - Single Column WEINGARTEN ARP 315 Z (UVV)


          • VÖGTLE SERVICE GMBH
          • Friedhofstr. 115
          • 73054 Eislingen
          • Deutschland

          • +49 71 61 99 73- 0
            +49 71 61 99 73- 13
          • Thomas.Ruckh@voegtle.de
            www.voegtle.de
          #1050-133061 · Eccentric Press - Single Column

          WEINGARTEN - ARP 315 Z (UVV) - - 1990 - Siemens S 5

          Technical details
          pressure 315 t︱throat 480 mm︱stroke 20 - 190 mm︱no. of strokes 36 + 45 /min︱distance table/ram, max. stroke up, adjustment up 615 mm︱table surface area 1400 x 880 mm︱hole in the table 250 mm︱table height over floor 800 mm︱passage to the back 950 mm︱ram surface 850 x 630 mm︱ram adjustment 125 mm︱power requirement 33,0 kW︱weight 30,0 t︱dimensions (WxDxH) 2,0 x 3,0 x 4,4 m︱
          permitted for manual put-in according to the German Safety Regulations (UVV) with pneumatic hydraulic clutch/brake combination, hydraulic overload protection in ram, pneumatic counterbalance in ram, motoric ram adjustment, semi-automatic stroke adjustment, two-hand operation can be offered without additional work, with putting into operation or alternatively with new control Siemens S 7-1500 F
            pressure 315 t
            throat 480 mm
            stroke 20 - 190 mm
            no. of strokes 36 + 45 /min
            distance table/ram, max. stroke . 615 mm
            table surface area 1400 x 880 mm
            hole in the table 250 mm
            table height over floor 800 mm
            passage to the back 950 mm
            ram surface 850 x 630 mm
            ram adjustment 125 mm
            power requirement 33,0 kW
            weight 30,0 t
            dimensions (WxDxH) 2,0 x 3,0 x 4,4 m
            Description :
            permitted for manual put-in according to the German Safety Regulations (UVV)
            with pneumatic hydraulic clutch/brake combination, hydraulic overload protection in ram, pneumatic counterbalance in ram, motoric ram adjustment, semi-automatic stroke adjustment, two-hand operation
            can be offered without additional work, with putting into operation or alternatively with new control Siemens S 7-1500 F
          Datasheet
          Request / Contact
          used  Eccentric Press - Single Column HENSEL EBU HK 250 FRC (UVV)


          • VÖGTLE SERVICE GMBH
          • Friedhofstr. 115
          • 73054 Eislingen
          • Deutschland

          • +49 71 61 99 73- 0
            +49 71 61 99 73- 13
          • Thomas.Ruckh@voegtle.de
            www.voegtle.de
          #1050-203014V · Eccentric Press - Single Column

          HENSEL - EBU HK 250 FRC (UVV) - - 1990 - Siemens S7-1500 F (neu)

          Technical details
          Pressure 250 t︱stroke 16 - 160 mm︱no. of strokes 33 / 50 /min︱Throat 410 mm︱distance table/ram, max. stroke up, adjustment up 450 mm︱table surface area 1100 x 790 mm︱Hole in the table 660 x 320 mm︱table height over floor 720 mm︱Passage to the back 590 mm︱ram surface 800 x 500 mm︱ram adjustment 120 mm︱power requirement 16,0 / 23,0 kW︱weight 28,5 t︱dimensions (WxDxH) 2,1 x 3,2 x 3,4 m︱ polumschaltbar
          with modernization of the electrical control permitted for manual put-in according to the German Safety Regulations (UVV) with motor with 2 speeds, hydraulic clutch/brake combination, hydraulic overload protection in ram, pneumatic counterbalance in ram, motoric ram adjustment, automatic stroke adjustment, motoric centralized lubrication
            Pressure 250 t
            stroke 16 - 160 mm
            no. of strokes 33 / 50 /min
            Throat 410 mm
            distance table/ram, max. stroke . 450 mm
            table surface area 1100 x 790 mm
            Hole in the table 660 x 320 mm
            table height over floor 720 mm
            Passage to the back 590 mm
            ram surface 800 x 500 mm
            ram adjustment 120 mm
            power requirement 16,0 / 23,0 kW
            weight 28,5 t
            dimensions (WxDxH) 2,1 x 3,2 x 3,4 m
            polumschaltbar
            Description :
            with modernization of the electrical control
            permitted for manual put-in according to the German Safety Regulations (UVV)
            with motor with 2 speeds, hydraulic clutch/brake combination, hydraulic overload protection in ram, pneumatic counterbalance in ram, motoric ram adjustment, automatic stroke adjustment, motoric centralized lubrication
          Datasheet
          Request / Contact
          used  Eccentric Press - Single Column BETZ EZH 100 (UVV)


          • VÖGTLE SERVICE GMBH
          • Friedhofstr. 115
          • 73054 Eislingen
          • Deutschland

          • +49 71 61 99 73- 0
            +49 71 61 99 73- 13
          • Thomas.Ruckh@voegtle.de
            www.voegtle.de
          #1050-133048 · Eccentric Press - Single Column

          BETZ - EZH 100 (UVV) - - 1990 - konventionell

          Technical details
          pressure 100 t︱throat 300 mm︱stroke 20 - 120 mm︱no. of strokes 55 /min︱distance table/ram, max. stroke up, adjustment up 400 mm︱table surface area 800 x 560 mm︱hole in the table 310 x 180 mm︱table height over floor 745 mm︱ram surface 520 x 245 mm︱ram adjustment 75 mm︱power requirement 5,5 kW︱weight 5,5 t︱dimensions (WxDxH) 1,1 x 2,4 x 2,4 m︱
          permitted for manual put-in according to the German Safety Regulations (UVV) with hydraulic clutch/brake combination, mechanical overload protection in ram, two-hand and foot operation
            pressure 100 t
            throat 300 mm
            stroke 20 - 120 mm
            no. of strokes 55 /min
            distance table/ram, max. stroke . 400 mm
            table surface area 800 x 560 mm
            hole in the table 310 x 180 mm
            table height over floor 745 mm
            ram surface 520 x 245 mm
            ram adjustment 75 mm
            power requirement 5,5 kW
            weight 5,5 t
            dimensions (WxDxH) 1,1 x 2,4 x 2,4 m
            Description :
            permitted for manual put-in according to the German Safety Regulations (UVV)
            with hydraulic clutch/brake combination, mechanical overload protection in ram, two-hand and foot operation
          Datasheet
          Request / Contact
          used  Eccentric Press - Single Column WEINGARTEN ARP 160 S (UVV)


          • VÖGTLE SERVICE GMBH
          • Friedhofstr. 115
          • 73054 Eislingen
          • Deutschland

          • +49 71 61 99 73- 0
            +49 71 61 99 73- 13
          • Thomas.Ruckh@voegtle.de
            www.voegtle.de
          #1050-133041 · Eccentric Press - Single Column

          WEINGARTEN - ARP 160 S (UVV) - - 1989 - Siemens S 5

          Technical details
          pressure 160 t︱throat 480 mm︱stroke fix fix 180 mm︱no. of strokes 25 - 70 /min︱distance table/ram, max. stroke up, adjustment up 650 mm︱table surface area 1100 x 900 mm︱Hole in the table 450 mm︱table height over floor 900 mm︱passage to the back 700 mm︱ram surface 900 x 600 mm︱ram adjustment 144 mm︱power requirement 30,75 kW︱weight 15,3 t︱dimensions (WxDxH) 2,0 x 2,4 x 3,75 m︱
          permitted for manual put-in according to the German Safety Regulations (UVV) with infinitely variable drive, FIX stroke, pneumatic clutch/brake combination (make Desch), hydraulic overload protection in ram, pneumatic counterbalance in ram, two-hand operation can be offered without putting into operation or alternatively with new control Siemens S 7-1500 F
            pressure 160 t
            throat 480 mm
            stroke fix fix 180 mm
            no. of strokes 25 - 70 /min
            distance table/ram, max. stroke . 650 mm
            table surface area 1100 x 900 mm
            Hole in the table 450 mm
            table height over floor 900 mm
            passage to the back 700 mm
            ram surface 900 x 600 mm
            ram adjustment 144 mm
            power requirement 30,75 kW
            weight 15,3 t
            dimensions (WxDxH) 2,0 x 2,4 x 3,75 m
            Description :
            permitted for manual put-in according to the German Safety Regulations (UVV)
            with infinitely variable drive, FIX stroke, pneumatic clutch/brake combination (make Desch), hydraulic overload protection in ram, pneumatic counterbalance in ram, two-hand operation
            can be offered without putting into operation or alternatively with new control Siemens S 7-1500 F
          Datasheet
          Request / Contact
          used  Eccentric Press - Single Column WEINGARTEN ARP 250 (UVV)


          • VÖGTLE SERVICE GMBH
          • Friedhofstr. 115
          • 73054 Eislingen
          • Deutschland

          • +49 71 61 99 73- 0
            +49 71 61 99 73- 13
          • Thomas.Ruckh@voegtle.de
            www.voegtle.de
          #1050-223021 · Eccentric Press - Single Column

          WEINGARTEN - ARP 250 (UVV) - - 1989 - konventionell

          Technical details
          pressure 250 t︱stroke 20 - 190 mm︱no. of strokes 24 / 48 /min︱throat 500 mm︱passage to the back 1000 mm︱dayligth 615 mm︱table surface area 1400 x 880 mm︱hole in the table 450/500 mm︱table height over floor 800 mm︱table adjustable mm︱ram surface 1380 x 620 mm︱ram adjustment 125 mm︱power requirement 29,0 kW︱Weight 27,0 t︱dimensions of the machine ca. 2,0 x 2,6 x 4,1 m x m x m︱
          permitted for manual loading according to the German Safety Regulations (UVV) with motor with 2 speeds, pneumatic clutch/brake combination, hydraulic overload protection in ram, pneumatic counterbalance in ram, motoric ram adjustment, semi-automatic stroke adjustment, motoric centralized lubrication, two-hand operation can be inspected in running function in our warehouse
            pressure 250 t
            stroke 20 - 190 mm
            no. of strokes 24 / 48 /min
            throat 500 mm
            passage to the back 1000 mm
            dayligth 615 mm
            table surface area 1400 x 880 mm
            hole in the table 450/500 mm
            table height over floor 800 mm
            ram surface 1380 x 620 mm
            ram adjustment 125 mm
            power requirement 29,0 kW
            Weight 27,0 t
            dimensions of the machine ca. 2,0 x 2,6 x 4,1 m x m x m
            Description :
            permitted for manual loading according to the German Safety Regulations (UVV)
            with motor with 2 speeds, pneumatic clutch/brake combination, hydraulic overload protection in ram, pneumatic counterbalance in ram, motoric ram adjustment, semi-automatic stroke adjustment, motoric centralized lubrication, two-hand operation
            can be inspected in running function in our warehouse
          Datasheet
          Request / Contact
          used  Eccentric Press - Single Column WEINGARTEN AP 100


          • VÖGTLE SERVICE GMBH
          • Friedhofstr. 115
          • 73054 Eislingen
          • Deutschland

          • +49 71 61 99 73- 0
            +49 71 61 99 73- 13
          • Thomas.Ruckh@voegtle.de
            www.voegtle.de
          #1050-233046 · Eccentric Press - Single Column

          WEINGARTEN - AP 100 - - 1989 - konventionell

          Technical details
          pressure 100 t︱stroke 20 - 180 mm︱no. of strokes 110 /min︱throat 425 mm︱passage to the back 720 mm︱dayligth 570 mm︱table surface area 900 x 700 mm︱hole in the table 250 mm︱table height over floor 800 mm︱ram surface 700 x 450 mm︱ram adjustment 80 mm︱power requirement 13,0 kW︱Weight 8,0 t︱dimensions of the machine ca. 2,2 x 1,6 x 3,2 m x m x m︱
          permitted for manual loading according to the German Safety Regulations (UVV) with motor, pneumatic clutch/brake combination, hydraulic overload protection in ram, semi-automatic stroke adjustment, motoric ram adjustment, fix table, motoric centralized lubrication, two-hand operation
            pressure 100 t
            stroke 20 - 180 mm
            no. of strokes 110 /min
            throat 425 mm
            passage to the back 720 mm
            dayligth 570 mm
            table surface area 900 x 700 mm
            hole in the table 250 mm
            table height over floor 800 mm
            ram surface 700 x 450 mm
            ram adjustment 80 mm
            power requirement 13,0 kW
            Weight 8,0 t
            dimensions of the machine ca. 2,2 x 1,6 x 3,2 m x m x m
            Description :
            permitted for manual loading according to the German Safety Regulations (UVV)
            with motor, pneumatic clutch/brake combination, hydraulic overload protection in ram, semi-automatic stroke adjustment, motoric ram adjustment, fix table, motoric centralized lubrication, two-hand operation
          Datasheet
          Request / Contact
          •   
          •   
          • 1  
          • 2  
          • 3  
          • 4  
          • 5  
          • 6  
          • 7  
          • 8  
          • 9  
          • 10  
          •   
          •   

          Vögtle Service GmbH   73054 - Eislingen Friedhofstr. 115 Deutschland
          Vögtle Service GmbH

          Friedhofstr. 115



          Contact Trader


            Vögtle Service GmbH
           Friedhofstr. 115
            73054 - Eislingen
            Deutschland
            +49 71 61 99 73- 0
            +49 71 61 99 73- 13
            Thomas.Ruckh@voegtle.de
            www.voegtle.de
            Contact person:

            Haben Sie eine Presse abzugeben? Wir kaufen Ihre gute Gebrauchte. Bitte nehmen Sie Kontakt mit uns auf!




          Machine category


          Abfallschere · Abgratpresse · Abkantpresse - hydraulisch · Abrollmulde-Richtmaschine · Abwickelhaspel · Abwickelhaspel-Richtmaschine · Aufspannplatte · Auswerfer · Bandanlage · Bandbeöler · Differenzwegpresse · Doppeldruckpresse · Doppelständer - Kurbelpresse · Doppelständerpresse - Hydraulisch · Doppelständerziehpresse - Hydraulisch · Doppelständerziehpresse - Mechanisch · Einsenkpresse · Einständerpresse - Hydraulisch · Einständerziehpresse - Hydraulisch · Exzenterpresse - Einständer · Haspel · Hydroformpresse · Kniegelenkpresse - Einständer · Kniehebelpresse - Einständer · Luftkessel · Nutenstanze · Pneumatische Presse · Richtmaschine · Richtplatte · Richtpresse - Einständer · Schmiedepresse · Spindelpresse · Stanzautomat-Doppelständer · Taumel- und Nietmaschine · Tuschierpresse · Verschiebetisch · Vorschubrichtmaschine · Walzenvorschub · Werkzeugprobierpresse · Werkzeugwechselwagen · Zangenvorschub · Ziehkissen ·