European network of stockholding machinery dealers

Bitte einen Suchbegriff eingeben - Please enter a search term
Category:
    Manufacturer:
      Machines:
        Trader:

          Walter Kames GmbH - Stockist for used machines

          Machinelist:


          Center Lathe

          used  Center Lathe LEINEN LB


          • Walter Kames GmbH
          • Dillenburger Weg 34
          • 40229 Düsseldorf
          • Deutschland

          • +49 211 215066 0
            +49 211 215067
          • info@kames.de
            www.kames.de
          #1004-10009 · Center Lathe

          LEINEN - LB - - 1975 -

          Technical details
          turning diameter over bed 130 mm︱turning diameter over slide rest 100 mm︱turning length 420 mm︱total power requirement 1 kW︱weight of the machine ca. 0,5 t︱dimensions of the machine ca. 1,4 x 0,9 x 1,2 m︱
          - push out collet - tailstock - 3-jaw chuck - MULTIFIX toolholder with various holders
            turning diameter over bed 130 mm
            turning diameter over slide rest 100 mm
            turning length 420 mm
            total power requirement 1 kW
            weight of the machine ca. 0,5 t
            dimensions of the machine ca. 1,4 x 0,9 x 1,2 m
            Description :
            - push out collet
            - tailstock
            - 3-jaw chuck
            - MULTIFIX toolholder with various holders

          Datasheet
          Request / Contact

          CNC Lathe

          used  CNC Lathe MAX MUELLER MDW 20


          • Walter Kames GmbH
          • Dillenburger Weg 34
          • 40229 Düsseldorf
          • Deutschland

          • +49 211 215066 0
            +49 211 215067
          • info@kames.de
            www.kames.de
          #1004-09960 · CNC Lathe

          MAX MUELLER - MDW 20 - - 1970/2001 - SIEMENS 840D

          Technical details
          turning diameter 800 mm︱turning length 630 mm︱control SIEMENS 840D ︱swing diameter over slide rest 410 mm︱z-axis 630 mm︱x-axis 500 mm︱spindle head 11 ︱spindle diameter in front bearing 130 mm︱spindle bore 73 mm︱spindle motor 37 kW︱spindle turning speed range 10 - 1000 U/min︱max. torque on the spindle 3700 Nm︱total power requirement 78 kW︱weight of the machine ca. 10 t︱dimensions of the machine ca. 6,5 x 3,5 x 2,8 m︱
          - Machine general overhould and retrofit with SIEMENS 840 D control in 2002 - power chuck 600 mm FORKHARDT - 12-fold drum type tool magazine - chip conveyor and coolant device - various tolholders
            turning diameter 800 mm
            turning length 630 mm
            control SIEMENS 840D
            swing diameter over slide rest 410 mm
            z-axis 630 mm
            x-axis 500 mm
            spindle head 11
            spindle diameter in front bearin. 130 mm
            spindle bore 73 mm
            spindle motor 37 kW
            spindle turning speed range 10 - 1000 U/min
            max. torque on the spindle 3700 Nm
            total power requirement 78 kW
            weight of the machine ca. 10 t
            dimensions of the machine ca. 6,5 x 3,5 x 2,8 m
            Description :
            - Machine general overhould and retrofit with SIEMENS 840 D control in 2002
            - power chuck 600 mm FORKHARDT
            - 12-fold drum type tool magazine
            - chip conveyor and coolant device
            - various tolholders
          Datasheet
          Request / Contact

          Machining Center - Vertical

          used  Machining Center - Vertical NORTE VS 500 Speed


          • Walter Kames GmbH
          • Dillenburger Weg 34
          • 40229 Düsseldorf
          • Deutschland

          • +49 211 215066 0
            +49 211 215067
          • info@kames.de
            www.kames.de
          #1004-09449 · Machining Center - Vertical

          NORTE - VS 500 Speed - - 1997/2005 - SIEMENS 840D

          Technical details
          x-travel 2000 mm︱y-travel 500 mm︱z-travel 600 mm︱table-size 2120 x 550 mm︱table load capacity 2000 kp︱feed 1 - 8000 mm/min︱rapid traverse X-axis 40 m/min︱rapid traverse Z-axis 20 m/min︱tool taper HSK 63 A ︱spindle turning speed - stepless 0 - 16000 U/min︱spindle motor 20 kW︱spindle diameter in front bearing 70 mm︱control SIEMENS 840D ︱tool diameter 63 / 126 mm︱toolpiece magazine: chain magazine 40 Stück︱tool length - max. 250 mm︱weight of tools max. 8 kg︱total power requirement 55 kVA︱weight of the machine ca. 12 t︱dimensions of the machine ca. 5,33 x 3,1 x 3,1 m︱
          - digital drive and control components SIEMENS 840 D - motor-spindle - 1,3 second spindle accelaration to 16000 rpm - pendulum machining - coolant plant for 70 bar - internal coolant supply - table with hydraulic workpiece clamping (T-sloted table retrofitable) - exhauster, chip convejor, levelling elements
            x-travel 2000 mm
            y-travel 500 mm
            z-travel 600 mm
            table-size 2120 x 550 mm
            table load capacity 2000 kp
            feed 1 - 8000 mm/min
            rapid traverse X-axis 40 m/min
            rapid traverse Z-axis 20 m/min
            tool taper HSK 63 A
            spindle turning speed - stepless 0 - 16000 U/min
            spindle motor 20 kW
            spindle diameter in front bearin. 70 mm
            control SIEMENS 840D
            tool diameter 63 / 126 mm
            toolpiece magazine: chain magazi. 40 Stück
            tool length - max. 250 mm
            weight of tools max. 8 kg
            total power requirement 55 kVA
            weight of the machine ca. 12 t
            dimensions of the machine ca. 5,33 x 3,1 x 3,1 m
            Description :
            - digital drive and control components SIEMENS 840 D
            - motor-spindle - 1,3 second spindle accelaration to 16000 rpm
            - pendulum machining
            - coolant plant for 70 bar
            - internal coolant supply
            - table with hydraulic workpiece clamping (T-sloted table retrofitable)
            - exhauster, chip convejor, levelling elements
          Datasheet
          Request / Contact

          Pillar Drilling Machine

          used  Pillar Drilling Machine ERFI REKORD


          • Walter Kames GmbH
          • Dillenburger Weg 34
          • 40229 Düsseldorf
          • Deutschland

          • +49 211 215066 0
            +49 211 215067
          • info@kames.de
            www.kames.de
          #1004-00442 · Pillar Drilling Machine

          ERFI REKORD - - - 1972 -

          Technical details
          bore capacity in steel (diameter) 20 mm︱throat 300 mm︱bore stroke 80 mm︱spindle turning speed range 116 - 3650 U/min︱total power requirement 1,2 kW︱weight of the machine ca. 0,3 t︱dimensions of the machine ca. 0,5 x 0,4 x 2,1 m︱
            bore capacity in steel (diameter. 20 mm
            throat 300 mm
            bore stroke 80 mm
            spindle turning speed range 116 - 3650 U/min
            total power requirement 1,2 kW
            weight of the machine ca. 0,3 t
            dimensions of the machine ca. 0,5 x 0,4 x 2,1 m
          Datasheet
          Request / Contact

          Ram-Type Floor Boring and Milling M/C

          used  Ram-Type Floor Boring and Milling M/C WOTAN Rapid 4 P


          • Walter Kames GmbH
          • Dillenburger Weg 34
          • 40229 Düsseldorf
          • Deutschland

          • +49 211 215066 0
            +49 211 215067
          • info@kames.de
            www.kames.de
          #1004-09717 · Ram-Type Floor Boring and Milling M/C

          WOTAN - Rapid 4 P - - 1992 -

          Technical details
          spindle diameter 140 mm︱x-travel 5000 mm︱y-travel 3000 mm︱spindle stroke 700 mm︱ram: horizontal adjustment 500 mm︱dimension of the ram 310 x 310 mm︱spindle taper ISO 50 ︱spindle turning speed range 2 - 2000 U/min︱feed 5000 mm/min︱rapid traverse 10 m/min︱spindle motor 40 kW︱semi-automatic operated SIEMENS 850 ︱total power requirement 100 kW︱weight of the machine ca. 42 t︱dimensions of the machine ca. 9,5 x 3,8 x 5,95 m︱
          - control SIEMENS 850 CNC - floor plate approx. 5 x 2 m - aero-static guideways - hydrostatic spindlebearings - device for coolant through spindle - HEIDENHAIN scales - leveling elements, hand-held pendant, misc. arbors and spare parts
            spindle diameter 140 mm
            x-travel 5000 mm
            y-travel 3000 mm
            spindle stroke 700 mm
            ram: horizontal adjustment 500 mm
            dimension of the ram 310 x 310 mm
            spindle taper ISO 50
            spindle turning speed range 2 - 2000 U/min
            feed 5000 mm/min
            rapid traverse 10 m/min
            spindle motor 40 kW
            semi-automatic operated SIEMENS 850
            total power requirement 100 kW
            weight of the machine ca. 42 t
            dimensions of the machine ca. 9,5 x 3,8 x 5,95 m
            Description :
            - control SIEMENS 850 CNC
            - floor plate approx. 5 x 2 m
            - aero-static guideways
            - hydrostatic spindlebearings
            - device for coolant through spindle
            - HEIDENHAIN scales
            - leveling elements, hand-held pendant, misc. arbors and spare parts

          Datasheet
          Request / Contact

          Double Column Milling M/C - Gantry Type

          used  Double Column Milling M/C - Gantry Type INGERSOLL


          • Walter Kames GmbH
          • Dillenburger Weg 34
          • 40229 Düsseldorf
          • Deutschland

          • +49 211 215066 0
            +49 211 215067
          • info@kames.de
            www.kames.de
          #1004-09556 · Double Column Milling M/C - Gantry Type

          INGERSOLL - - - 1975/1995 - SIEMENS 840C

          Technical details
          x-travel 16500 mm︱y-travel 6000 mm︱z-travel 600 mm︱w-axis 2915 mm︱surface area 16460 x 4875 mm︱table load 200 t︱distance between columns 5590 mm︱distance table - lower edge spindle 45 - 3580 mm︱spindle diameter 152 mm︱spindle motor 30 kW︱spindle taper ISO 50 ︱spindle turning speed range 25 - 600 U/min︱feed in x - axis 6,3 m/min︱feed in y - axis 3 m/min︱control SIEMENS 840C ︱total power requirement kW︱weight of the machine ca. 300 t︱dimensions of the machine ca. 30 x 10 x 9 m︱
          - 1995 retrofitted with CNC control SIEMENS 840 C - universal milling heads - 2 milling heads on crossrail with ram-section 420 x 420 mm - crossrail movement by ac motor and with hydr. clamping - measuring system for x- and y-axis via rack/shaft - column movement by double rack/pinion - floor plate
            x-travel 16500 mm
            y-travel 6000 mm
            z-travel 600 mm
            w-axis 2915 mm
            surface area 16460 x 4875 mm
            table load 200 t
            distance between columns 5590 mm
            distance table - lower edge spin. 45 - 3580 mm
            spindle diameter 152 mm
            spindle motor 30 kW
            spindle taper ISO 50
            spindle turning speed range 25 - 600 U/min
            feed in x - axis 6,3 m/min
            feed in y - axis 3 m/min
            control SIEMENS 840C
            weight of the machine ca. 300 t
            dimensions of the machine ca. 30 x 10 x 9 m
            Description :
            - 1995 retrofitted with CNC control SIEMENS 840 C
            - universal milling heads
            - 2 milling heads on crossrail with ram-section 420 x 420 mm
            - crossrail movement by ac motor and with hydr. clamping
            - measuring system for x- and y-axis via rack/shaft
            - column movement by double rack/pinion
            - floor plate


          Datasheet
          Request / Contact

          Planer-Type Milling M/C - Double Column

          used  Planer-Type Milling M/C - Double Column WALDRICH COBURG 17-10 FP 225


          • Walter Kames GmbH
          • Dillenburger Weg 34
          • 40229 Düsseldorf
          • Deutschland

          • +49 211 215066 0
            +49 211 215067
          • info@kames.de
            www.kames.de
          #1004-09949 · Planer-Type Milling M/C - Double Column

          WALDRICH COBURG - 17-10 FP 225 - - 85/2003 - SIEMENS 840D

          Technical details
          x-travel 6600 mm︱y-travel 3200 mm︱z-travel 1000 mm︱w-axis 1750 mm︱spindle motor 55 kW︱spindle turning speed range 5 - 2000 U/min︱spindle taper ISO 60 ︱spindle diameter in front bearing 170 mm︱table lenght 1 + 2 6400 mm︱table width 2250 mm︱daylight between the side columns 2650 mm︱table load 50 t︱no. of tools in the magazine 60 Stück︱distance spindle nose and table 2500 mm︱control SIEMENS 840D ︱feed range - table 10 - 15000 mm/min︱feeds crossrail-slide horizontal 10 - 10000 mm/min︱feed in w - axe 10 - 2000 mm/min︱total power requirement 85 kW︱weight of the machine ca. 125 t︱
          Machine general overhauled and equipped with SIEMENS 840 D control in 2003 - new digital motors, drive controllers, measuring systems and switch cabinet - tool changer for 60 tools (45 ISO 50, 15 ISO 60) - 3 angular milling heads (HSD 175, WFD 800) with service device 4 x 90° indexing - hydrostatic table guideways - adjustable crossrail - 2 tables coupled - chip conveyor - coolant device
            x-travel 6600 mm
            y-travel 3200 mm
            z-travel 1000 mm
            w-axis 1750 mm
            spindle motor 55 kW
            spindle turning speed range 5 - 2000 U/min
            spindle taper ISO 60
            spindle diameter in front bearin. 170 mm
            table lenght 1 + 2 6400 mm
            table width 2250 mm
            daylight between the side column. 2650 mm
            table load 50 t
            no. of tools in the magazine 60 Stück
            distance spindle nose and table 2500 mm
            control SIEMENS 840D
            feed range - table 10 - 15000 mm/min
            feeds crossrail-slide horizontal 10 - 10000 mm/min
            feed in w - axe 10 - 2000 mm/min
            total power requirement 85 kW
            weight of the machine ca. 125 t
            Description :
            Machine general overhauled and equipped with SIEMENS 840 D control in 2003

            - new digital motors, drive controllers, measuring systems and switch cabinet
            - tool changer for 60 tools (45 ISO 50, 15 ISO 60)
            - 3 angular milling heads (HSD 175, WFD 800) with service device 4 x 90°
            indexing
            - hydrostatic table guideways
            - adjustable crossrail
            - 2 tables coupled
            - chip conveyor
            - coolant device
          Datasheet
          Request / Contact

          Cylindrical Grinding Machine - Universal

          used  Cylindrical Grinding Machine - Universal STUDER S140


          • Walter Kames GmbH
          • Dillenburger Weg 34
          • 40229 Düsseldorf
          • Deutschland

          • +49 211 215066 0
            +49 211 215067
          • info@kames.de
            www.kames.de
          #1004-10047 · Cylindrical Grinding Machine - Universal

          STUDER - S140 - - 2002 - Siemens 840 D

          Technical details
          grinding diameter 120 mm︱grinding length 110 mm︱centre height 60 mm︱x-axis 300 mm︱internal diameter 100 mm︱grinding depth max 300 mm︱swing diameter 120 mm︱rapid traverse 15 m/min︱z-axis 300 mm︱solution in X-, Y- und Z-axis 0,0001 mm︱spindle turning speed range 0-1000 U/min︱tailstock taper MT 5 ︱control Siemens 840 D ︱grinding diameter max. 120 mm︱grinding wheel diameter 400 mm︱grinding wheel width 32 mm︱grinding wheel hole diameter 127 mm︱grinding wheel speeds 3150 U/min︱total power requirement 56 kW︱weight of the machine ca. 6,3 t︱
          two 120mm internal grinding spindels 60.000 and 90.000 rpm installed DIETTEL M5000 balancing dresser CO2 fire extinguishing cooling with oil granite machine bed OD grinding dia 120 mm OD grinding legth 100 mm simultanious ID - OD operation X2 = OD travel X1 = IDtravel
            grinding diameter 120 mm
            grinding length 110 mm
            centre height 60 mm
            x-axis 300 mm
            internal diameter 100 mm
            grinding depth max 300 mm
            swing diameter 120 mm
            rapid traverse 15 m/min
            z-axis 300 mm
            solution in X-, Y- und Z-axis 0,0001 mm
            spindle turning speed range 0-1000 U/min
            tailstock taper MT 5
            control Siemens 840 D
            grinding diameter max. 120 mm
            grinding wheel diameter 400 mm
            grinding wheel width 32 mm
            grinding wheel hole diameter 127 mm
            grinding wheel speeds 3150 U/min
            total power requirement 56 kW
            weight of the machine ca. 6,3 t
            Description :
            two 120mm internal grinding spindels 60.000 and 90.000 rpm installed
            DIETTEL M5000 balancing
            dresser
            CO2 fire extinguishing
            cooling with oil
            granite machine bed
            OD grinding dia 120 mm
            OD grinding legth 100 mm
            simultanious ID - OD operation
            X2 = OD travel
            X1 = IDtravel
          Datasheet
          Request / Contact

          Internal Grinding Machine

          used  Internal Grinding Machine STUDER S140


          • Walter Kames GmbH
          • Dillenburger Weg 34
          • 40229 Düsseldorf
          • Deutschland

          • +49 211 215066 0
            +49 211 215067
          • info@kames.de
            www.kames.de
          #1004-10045 · Internal Grinding Machine

          STUDER - S140 - - 2002 - Siemens 840 D

          Technical details
          internal diameter 100 mm︱grinding depth 100 mm︱swing diameter 120 mm︱x-axis 300 mm︱rapid traverse 15 m/min︱z-axis 300 mm︱solution in X-, Y- und Z-axis 0,0001 mm︱spindle turning speed range 0-1000 U/min︱tailstock taper MT 5 ︱control Siemens 840 D ︱total power requirement 56 kW︱weight of the machine ca. 6,3 t︱dimensions of the machine ca. 3,8 x 2,6 x 2,2 m︱
          two 120mm grinding spindels installed 90.000 rpm and 45.000 rpm DIETTEL M5000 balancing dresser CO2 fire extinguishing cooling with oil granite machine bed
            internal diameter 100 mm
            grinding depth 100 mm
            swing diameter 120 mm
            x-axis 300 mm
            rapid traverse 15 m/min
            z-axis 300 mm
            solution in X-, Y- und Z-axis 0,0001 mm
            spindle turning speed range 0-1000 U/min
            tailstock taper MT 5
            control Siemens 840 D
            total power requirement 56 kW
            weight of the machine ca. 6,3 t
            dimensions of the machine ca. 3,8 x 2,6 x 2,2 m
            Description :
            two 120mm grinding spindels installed 90.000 rpm and 45.000 rpm
            DIETTEL M5000 balancing
            dresser
            CO2 fire extinguishing
            cooling with oil
            granite machine bed
          Datasheet
          Request / Contact

          Hand-Operated Press

          used  Hand-Operated Press WMW VST 3-10,5


          • Walter Kames GmbH
          • Dillenburger Weg 34
          • 40229 Düsseldorf
          • Deutschland

          • +49 211 215066 0
            +49 211 215067
          • info@kames.de
            www.kames.de
          #1004-00389 · Hand-Operated Press

          WMW - VST 3-10,5 - - 1990 -

          Technical details
          pressure 1 t︱table-size 150 mm︱throat 200 mm︱total power requirement kW︱weight of the machine ca. 70 kg︱dimensions of the machine ca. m︱
          Lever press with 12-fold indexing table. Press designed for table mounting. 3 pieces available, price per piece. Presses are unused.
            pressure 1 t
            table-size 150 mm
            throat 200 mm
            weight of the machine ca. 70 kg
            Description :
            Lever press with 12-fold indexing table. Press designed for table mounting.
            3 pieces available, price per piece.
            Presses are unused.
          Datasheet
          Request / Contact

          Protective Gas Welding Machine

          used  Protective Gas Welding Machine CASTOLIN + EUTECTIC CASTOWIG 200 GW


          • Walter Kames GmbH
          • Dillenburger Weg 34
          • 40229 Düsseldorf
          • Deutschland

          • +49 211 215066 0
            +49 211 215067
          • info@kames.de
            www.kames.de
          #1004-00473 · Protective Gas Welding Machine

          CASTOLIN + EUTECTIC - CASTOWIG 200 GW - - -

          Technical details
          current intensivity 200 A︱total power requirement 16 kVA︱weight of the machine ca. 0,2 t︱dimensions of the machine ca. 1,0 x 0,6 x 0,8 m︱
          Schutzgasschweissanlage mit Armatur, Schlauchset und Wasserkühlung - 100% 200 A, 20 V - 60% 250 A, 18 V
            current intensivity 200 A
            total power requirement 16 kVA
            weight of the machine ca. 0,2 t
            dimensions of the machine ca. 1,0 x 0,6 x 0,8 m
            Description :
            Schutzgasschweissanlage mit Armatur, Schlauchset und Wasserkühlung

            - 100% 200 A, 20 V
            - 60% 250 A, 18 V
          Datasheet
          Request / Contact

          Welding Table

          used  Welding Table


          • Walter Kames GmbH
          • Dillenburger Weg 34
          • 40229 Düsseldorf
          • Deutschland

          • +49 211 215066 0
            +49 211 215067
          • info@kames.de
            www.kames.de
          #1004-00432 · Welding Table

          - - - 1980 -

          Technical details
          table length 1200 mm︱table width 750 mm︱table height 870 mm︱Plate thickness 60 mm︱total power requirement kW︱weight of the machine ca. 0,4 t︱dimensions of the machine ca. 1,2 x 0,8 x 0,9 m︱
          table with 2 rolls movable
            table length 1200 mm
            table width 750 mm
            table height 870 mm
            Plate thickness 60 mm
            weight of the machine ca. 0,4 t
            dimensions of the machine ca. 1,2 x 0,8 x 0,9 m
            Description :
            table with 2 rolls movable
          Datasheet
          Request / Contact

          Adjusting Instrument

          used  Adjusting Instrument KELCH Trabant 200 P


          • Walter Kames GmbH
          • Dillenburger Weg 34
          • 40229 Düsseldorf
          • Deutschland

          • +49 211 215066 0
            +49 211 215067
          • info@kames.de
            www.kames.de
          #1004-00271 · Adjusting Instrument

          KELCH - Trabant 200 P - - 1983 -

          Technical details
          longitudinal travel 200 mm︱cross travel 100 mm︱table length mm︱table width mm︱screen dia. 95 mm︱enlargement 20 x ︱reading precision 0,01 mm︱voltage 380 V︱total power requirement kW︱weight of the machine ca. 0,1 t︱dimensions of the machine ca. 1 x 1 x 2 m︱
            longitudinal travel 200 mm
            cross travel 100 mm
            screen dia. 95 mm
            enlargement 20 x
            reading precision 0,01 mm
            voltage 380 V
            weight of the machine ca. 0,1 t
            dimensions of the machine ca. 1 x 1 x 2 m
          Datasheet
          Request / Contact

          Angular Clamping Device

          used  Angular Clamping Device UNBEKANNT


          • Walter Kames GmbH
          • Dillenburger Weg 34
          • 40229 Düsseldorf
          • Deutschland

          • +49 211 215066 0
            +49 211 215067
          • info@kames.de
            www.kames.de
          #1004-00359 · Angular Clamping Device

          UNBEKANNT - - - -

          Technical details
          length 800 mm︱width 450 mm︱height 800 mm︱total power requirement kW︱weight of the machine ca. 0,5 t︱dimensions of the machine ca. m︱
            length 800 mm
            width 450 mm
            height 800 mm
            weight of the machine ca. 0,5 t
          Datasheet
          Request / Contact

          Angular Head

          used  Angular Head WALDRICH WFD 100


          • Walter Kames GmbH
          • Dillenburger Weg 34
          • 40229 Düsseldorf
          • Deutschland

          • +49 211 215066 0
            +49 211 215067
          • info@kames.de
            www.kames.de
          #1004-00355 · Angular Head

          WALDRICH - WFD 100 - - 1970 -

          Technical details
          throat 450 mm︱tool adaptor 60 ISO︱power requirement 100 kW︱spindle distance 720 mm︱speeds 12 - 450 U/min︱total power requirement kW︱weight of the machine ca. 2 t︱dimensions of the machine ca. m︱
            throat 450 mm
            tool adaptor 60 ISO
            power requirement 100 kW
            spindle distance 720 mm
            speeds 12 - 450 U/min
            weight of the machine ca. 2 t
          Datasheet
          Request / Contact

          Bar Stock Carrier

          used  Bar Stock Carrier TRAUB 45/26


          • Walter Kames GmbH
          • Dillenburger Weg 34
          • 40229 Düsseldorf
          • Deutschland

          • +49 211 215066 0
            +49 211 215067
          • info@kames.de
            www.kames.de
          #1004-00388 · Bar Stock Carrier

          TRAUB - 45/26 - - 1984/96 -

          Technical details
          diameter 45 mm︱length 4400 mm︱total power requirement 1,0 kW︱weight of the machine ca. 1,2 t︱dimensions of the machine ca. 5 x 0,4 x 1,2 m︱
            diameter 45 mm
            length 4400 mm
            total power requirement 1,0 kW
            weight of the machine ca. 1,2 t
            dimensions of the machine ca. 5 x 0,4 x 1,2 m
          Datasheet
          Request / Contact

          Drill bench

          used  Drill bench


          • Walter Kames GmbH
          • Dillenburger Weg 34
          • 40229 Düsseldorf
          • Deutschland

          • +49 211 215066 0
            +49 211 215067
          • info@kames.de
            www.kames.de
          #1004-00262 · Drill bench

          - - - -

          Technical details
          table length 800 mm︱table width 700 mm︱table height 600 mm︱no. of flutes 8 ︱groove width 19 x 28 mm︱total power requirement kW︱weight of the machine ca. 0,4 t︱dimensions of the machine ca. m︱
          size oif t-slotted surface 7000 x 800 mm
            table length 800 mm
            table width 700 mm
            table height 600 mm
            no. of flutes 8
            groove width 19 x 28 mm
            weight of the machine ca. 0,4 t
            Description :
            size oif t-slotted surface 7000 x 800 mm
          Datasheet
          Request / Contact

          Fixatoren

          used  Fixatoren BWF S V - se / c / p


          • Walter Kames GmbH
          • Dillenburger Weg 34
          • 40229 Düsseldorf
          • Deutschland

          • +49 211 215066 0
            +49 211 215067
          • info@kames.de
            www.kames.de
          #1004-00396 · Fixatoren

          BWF - S V - se / c / p - - 0 -

          Technical details
          max. load 60 to︱dimensions 330 x 225 x 166 mm︱weight 28 kg︱
          42 pcs. of levelling elements for floor-plates - with ball-adjusting disc for non-angular surfaces - with fixation and height-adjustmet bolt - with possibility of fixation to the foundation by means of 2 lateral foundation bolts (not included) - height of adjustment bolt 380 mm, M 36 x 1,5, SW 30
            max. load 60 to
            dimensions 330 x 225 x 166 mm
            weight 28 kg
            Description :
            42 pcs. of levelling elements for floor-plates
            - with ball-adjusting disc for non-angular surfaces
            - with fixation and height-adjustmet bolt
            - with possibility of fixation to the foundation by means
            of 2 lateral foundation bolts (not included)
            - height of adjustment bolt 380 mm, M 36 x 1,5, SW 30
          Datasheet
          Request / Contact

          High-frequency-spindle

          used  High-frequency-spindle HAUSER KM 012


          • Walter Kames GmbH
          • Dillenburger Weg 34
          • 40229 Düsseldorf
          • Deutschland

          • +49 211 215066 0
            +49 211 215067
          • info@kames.de
            www.kames.de
          #1004-00348 · High-frequency-spindle

          HAUSER - KM 012 - - 1993 -

          Technical details
          turning speeds 30000 U/min︱frequency 1000 Hz︱output 3,5 kw︱frequency range 166 - 1000 Hz︱voltage 380 V︱current 7,5 A︱spindle taper ISO 50
          Spindle with coolant by water with extra lquid cooler and lubrication system spindle speeds 5000 - 30000 r/min
            turning speeds 30000 U/min
            frequency 1000 Hz
            output 3,5 kw
            frequency range 166 - 1000 Hz
            voltage 380 V
            current 7,5 A
            spindle taper ISO 50
            Description :
            Spindle with coolant by water with extra lquid cooler and lubrication system
            spindle speeds 5000 - 30000 r/min
          Datasheet
          Request / Contact

          Rotary Indexing Table

          used  Rotary Indexing Table EIMELDINGEN S 500 ST


          • Walter Kames GmbH
          • Dillenburger Weg 34
          • 40229 Düsseldorf
          • Deutschland

          • +49 211 215066 0
            +49 211 215067
          • info@kames.de
            www.kames.de
          #1004-00285 · Rotary Indexing Table

          EIMELDINGEN - S 500 ST - - 1981 -

          Technical details
          table diameter 500 mm︱load of tilting table 0,4/0,2 t︱no. of flutes 6 ︱bore 40 mm︱table height over floor 425 mm︱swivelling range 90 Grad︱rotation movement 360 Grad︱weight 450 kg︱
          sviwable 90° optical readout
            table diameter 500 mm
            load of tilting table 0,4/0,2 t
            no. of flutes 6
            bore 40 mm
            table height over floor 425 mm
            swivelling range 90 Grad
            rotation movement 360 Grad
            weight 450 kg
            Description :
            sviwable 90°
            optical readout
          Datasheet
          Request / Contact

          Spare Parts

          used  Spare Parts REXROTH


          • Walter Kames GmbH
          • Dillenburger Weg 34
          • 40229 Düsseldorf
          • Deutschland

          • +49 211 215066 0
            +49 211 215067
          • info@kames.de
            www.kames.de
          #1004-00373 · Spare Parts

          REXROTH - - - NEW -

          Technical details
          diameter of piston 50 mm︱stroke length max. 800 mm︱
          2 hydraulic lifting cylinder - Unused - , appr. 800 mm stroke, bar diameter 50 mm
            diameter of piston 50 mm
            stroke length max. 800 mm
            Description :
            2 hydraulic lifting cylinder - Unused - , appr. 800 mm stroke, bar diameter 50 mm
          Datasheet
          Request / Contact

          mixer and kneader

          used  mixer and kneader BLASER JETMIX


          • Walter Kames GmbH
          • Dillenburger Weg 34
          • 40229 Düsseldorf
          • Deutschland

          • +49 211 215066 0
            +49 211 215067
          • info@kames.de
            www.kames.de
          #1004-00471 · mixer and kneader

          BLASER - JETMIX - - -

          Technical details
          Drive 0,0 kW︱Capacity 0 kg/h︱material 0 ︱volume L︱
            Drive 0,0 kW
          Datasheet
          Request / Contact

          Chain Hoist - Manual

          used  Chain Hoist - Manual YALE VS Plus


          • Walter Kames GmbH
          • Dillenburger Weg 34
          • 40229 Düsseldorf
          • Deutschland

          • +49 211 215066 0
            +49 211 215067
          • info@kames.de
            www.kames.de
          #1004-00462 · Chain Hoist - Manual

          YALE - VS Plus - - 2008 -

          Technical details
          weight max. 2 t︱stroke 3000 mm︱total power requirement kW︱weight of the machine ca. 0,025 t︱dimensions of the machine ca. 0,3 x 0,4 x 0,2 m︱
            weight max. 2 t
            stroke 3000 mm
            weight of the machine ca. 0,025 t
            dimensions of the machine ca. 0,3 x 0,4 x 0,2 m
          Datasheet
          Request / Contact

          Toolcupboard

          used  Toolcupboard


          • Walter Kames GmbH
          • Dillenburger Weg 34
          • 40229 Düsseldorf
          • Deutschland

          • +49 211 215066 0
            +49 211 215067
          • info@kames.de
            www.kames.de
          #1004-00477 · Toolcupboard

          - - - -

          Technical details
          length 800 mm︱width 800 mm︱height 1200 mm︱
            length 800 mm
            width 800 mm
            height 1200 mm
          Datasheet
          Request / Contact
          •   
          •   
          • 1  
          • 2  
          •   
          •   

            Trader Profile:   Walter Kames GmbH

          Contact Trader



            Walter Kames GmbH
           Dillenburger Weg 34
            40229 - Düsseldorf
            Deutschland
            +49 211 215066 0">+49 211 215066 0
            +49 211 215067
            info@kames.de
            www.kames.de

          Profile of Trader

          The company Walter Kames
          is known worldwide for the trade with high-quality secondhand machinetools.

          The company is buying and selling individual machines, production lines and complete factory inventory for the metalcutting and metalforming industry.
          On an area of more than 10000 sqm with crane capacity upto 70 tons customers from all over the world are finding one of the biggest warehouses for used machines in Europe. From the simple lathe to the biggest CNC plano milling machine we are able to demonstrate the majority of our machines to the interested customer under power. The modification, overhauling and control retrofits are part of the services offered.

          Latest communication means and access to specific online records enable our highly qualified team of employees to react flexible and quickly to the requirements of our customers. Only in the year 2005 we have supplied different machinetools with a total weight of more than 3500 tons to customers in 25 countries on all continents.


          A look at the history:

          1922 .......... Company Kames was founded by Josef Kames.
          1957 .......... Walter Kames takes over ownership and management.
          1985 .......... The company was renamed WALTER KAMES LTD.
          2010 .......... Mr. Alexander Kames gets appointed as managing director.

          Walter Kames GmbH
          Dillenburger Weg 34
          40229 Düsseldorf

          Tel.: 0211-215066-0
          Fax: 0211-215067
          eMail: info@kames.de

          Geschäftsführer: Alexander Kames




          Walter Kames GmbH   40229 - Düsseldorf Dillenburger Weg 34 Deutschland
          Walter Kames GmbH

          Dillenburger Weg 34



          Contact Trader


            Walter Kames GmbH
           Dillenburger Weg 34
            40229 - Düsseldorf
            Deutschland
            +49 211 215066 0
            +49 211 215067
            info@kames.de
            www.kames.de
            Contact person:
          Herrn Thomas Nieting +49 211 215066 12
          Herrn Alexander Kames +49 211 215066 13

           




          Machine category


          Aufspannplatte · Aufspanntisch · Aufspannwinkel · Bearbeitungszentrum - Horizontal · Bearbeitungszentrum - Universal · Bearbeitungszentrum - Vertikal · Bohrwürfeltisch · Breitband-Schleifmaschine · CNC Drehmaschine · Dreh-,Schwenk-, und Kipptisch · Einstellgerät · Ersatzteile · Fahrständerfräsmaschine · Fixatoren · Flachschleifmaschine · Fräsmaschine - Vertikal · Futter · Handhebelpresse · Hochfrequenzspindel · Hydraulische Presse · Innenschleifmaschine · Kaltwalzmaschine · Karusselldreh- und Schleifma.-Doppelst. · Karusselldrehmaschine - Doppelständer · Kettenzug - von Hand · Kreisteiltisch · Leit- und Zugspindeldrehmaschine · LuZ · Messerköpfe · Mischer und Kneter · Portal - Bearbeitungszentrum · Portalfräsmaschine · Portalfräsmaschine verfahrbar · Radialbohrmaschine · Rundschleifmaschine · Rundschleifmaschine - Außen · Rundschleifmaschine - Universal · Schutzgasschweißanlage · Schweißtisch · Schwerdrehbank · Schwerdrehmaschine · Spiralkegelradschneidmaschine · Spitzendrehbank · Spitzenlose - Rundschleifmaschine · Stangenautomat - Einspindel · Stangenzuführung · Säulenbohrmaschine · Tischbohrwerk · Traghülsenplattenbohrwerk · Transformator · Vertikal - Bandsäge · Vertikaldrehmaschine · Werkzeugschrank · Winkelkopf · Würfeltisch - schwenkbar · Wälzfräserschärfmaschine · Zahnflankenschleifmaschine · Zubehör ·