Hoist Traverse
Machinelist: Hoist Traverse
Cleaning unit
- Heinz Sanders GmbH
- Fresenburger Weg 4
- 49779 Niederlangen
- Deutschland
-
+49 (0) 5939 9406 40
+49 (0) 5939 9406 50 -
maschinen@heinz-sanders.de
www.heinz-sanders.de
#1125-7233 · Cleaning unit
DIBO - CT80 BT 70 - - 2020 -
Technical details
- Exhibition machine and demonstration machine, like new- - Most compact ride-on scrubber-dryer from DiBO with 2 brushes - Possibility to dispense detergent: in ECO mode with constant Saving or automatic regulation of the machine depending on the speed of the machine Brush motors and suction: even less energy consumption, even more Smoothness - Display: large, multilingual, including hour counter, battery level and work programs - Memory card: allows the storage of battery charge cycles and Power consumption of the motor - CFS system: water distribution from the middle of the brush to avoid waste Avoid cleaning solution - SLS system: self-leveling electronic system to keep the brush always lies perfectly on the floor - EDD system: suction cup for the best results during drying and during Area performance was developed - Wheels: oil resistant - Extraction: 2 levels with fans and stainless steel shaft
- G. FOLMER Industriebedarf
- Mangenbergerstr. 347
- 42655 Solingen
- Deutschland
-
+49 21241071
+49 21241276 -
folmer.maschinen@t-online.de
#2010-592 · Cleaning unit
Vorwerk - Flaechenwaescher - - 2019 -
Technical details
Datasheet
Request / Contact
- Aleman Machines e.K.
- Am Mühlweg 1
- 73466 Lauchheim
- Deutschland
-
+49 (0)7363-6098 20
+49 (0)7363-6098 19 -
info@aleman-machines.com
www.aleman-machines.com
#1120-975 · Cleaning unit
HEIN HESO - Compo 1020 WST - - 2016 -
Technical details
- IMZ Maschinen Vertriebs GmbH
- Marie-Curie-Straße 19
- 73529 Schwäbisch Gmünd
- Deutschland
-
0049 (0) 7171 987130
0049 (0) 7171 9871329 -
info@imz.de
www.imz.de
#1075-6585 · Cleaning unit
DEBUS - DES 119 - - 2013 -
Technical details
swarf cleaner
Datasheet
Request / Contact
- ATMH Werkzeugmaschinenhandel GmbH
- Scharpenbergerstr.96-98
- 58256 Ennepetal
- Deutschland
-
+49 (0) 2333 / 403 43 70
+49 (0) 2333 / 403 43 75 -
info@atmh.de
www.atmh.de
#2065-S592 · Cleaning unit
HAKO - HAKOMAT B70 CLHM - - 2013 -
Technical details
Datasheet
Request / Contact
- Heinz Sanders GmbH
- Fresenburger Weg 4
- 49779 Niederlangen
- Deutschland
-
+49 (0) 5939 9406 40
+49 (0) 5939 9406 50 -
maschinen@heinz-sanders.de
www.heinz-sanders.de
#1125-6754 · Cleaning unit
TENNANT - Tennant 7100 - - 2009 (2021) -
Technical details
Sweeper - scrubber dryer Operating hours: approx. 400 hours incl. 4x brush + charger including new battery pack (consisting of 6x gel battery) !!
- Marcels Maschinen AG
- Anthoptstrasse 11
- 8222 Beringen (Schaffhausen)
- Schweiz
-
(0041) 44 872 3400
(0041) 44 872 3403 -
info@marcels-maschinen.ch
http://www.marcels-maschinen.ch
#1065-4963 · Cleaning unit
JETO - EUROCLEAN - - 2000 -
Technical details
Datasheet
Request / Contact
- Zuefle GmbH
- Levi-Strauss-Str. 121
- 97232 Giebelstadt
- Deutschland
-
+49 (0)9334-978608-0
+49 (0)9334-978608-2 -
info@zuefle.com
www.zuefle.com
#1139-LS7007 · Cleaning unit
Kohlhoff Hygienetechnik Sailer - SSR-1 - - 09/2014 -
Technical details
APRON CLEANER APRON CLEANER for thorough cleaning and disinfection of aprons in meat processing plants. Application: the apron is held by the person cleaning it in a plastic funnel and sprayed with water in a targeted manner via movements using an integrated high-pressure pump with a capacity of 100 bar/water pressure, even heavily soiled aprons are reliably cleaned in max. 15 seconds, meat residues and fibres are rinsed out of the butcher's apron, the high-pressure water jet is activated via a foot switch, cleaning or disinfecting agent is automatically added to the water via a dosing system to optimise the cleaning result. cleaning agent or disinfectant to the water via a dosing system, collection container with sliding lid for easy access for cleaning and maintenance work, including canister holder for cleaning agent for lateral mounting on the side of the housing. Electrical connection: 400 V/N/PE, 50/60 Hz, power consumption: 5.6 kW Water connection: 3/4" max. 40°C, min. 2.5 bar, water drain DN50, water connection min. 20 l/min, When connecting the machine to the drinking water system, an approved pipe isolator must be provided on site. Dimensions: (W x D x H): 800/1053 x 750 x 950/1480 mm The unit can be inspected under power near Ulm. Arrange an appointment. for thorough cleaning and disinfection of aprons in meat processing plants. Application: the apron is held by the person cleaning it in a plastic funnel and sprayed with water in a targeted manner via movements using an integrated high-pressure pump with a capacity of 100 bar/water pressure, Even heavily soiled aprons are reliably cleaned in max. 15 seconds, meat residues and fibres are rinsed out of the butcher's apron, the high-pressure water jet is activated via a foot switch, cleaning or disinfecting agent is automatically added to the water via a dosing system to optimise the cleaning result. cleaning agent or disinfectant to the water via a dosing system, collecting tank with sliding lid for easy access for cleaning and maintenance work, including canister holder for cleaning agent for lateral mounting on the side of the housing. Electrical connection: 400 V/N/PE, 50/60 Hz, power consumption: 5.6 kW Water connection: 3/4" max. 65°C, min. 2.5 bar, water drain DN50, water connection min. 20 l/min, When connecting the machine to the drinking water system, an approved pipe isolator must be provided on site. Dimensions: (W x D x H): 800/1053 x 750 x 950/1480 mm The unit can be inspected under power near Ulm. Arrange an appointment.
Hoist Traverse
- ATMH Werkzeugmaschinenhandel GmbH
- Scharpenbergerstr.96-98
- 58256 Ennepetal
- Deutschland
-
+49 (0) 2333 / 403 43 70
+49 (0) 2333 / 403 43 75 -
info@atmh.de
www.atmh.de
#2065-S1855 · Hoist Traverse
VETTER - ROTOMAX - Lastwendekran 80t - - unbekannt -
Technical details
Datasheet
Request / Contact
- ATMH Werkzeugmaschinenhandel GmbH
- Scharpenbergerstr.96-98
- 58256 Ennepetal
- Deutschland
-
+49 (0) 2333 / 403 43 70
+49 (0) 2333 / 403 43 75 -
info@atmh.de
www.atmh.de
#2065-AR1003 · Hoist Traverse
BÖNNHOFF - 28T - - unbekannt -
Technical details
Datasheet
Request / Contact
- Markus Hirsch GmbH
- Hüttenstrasse 1
- 46284 Dorsten
- Deutschland
-
+49 2362 95035 12
+49 2362 95035 10 -
liersch@hirsch-maschinen.de
www.hirsch-maschinen.de
#1077-01335 · Hoist Traverse
SOLID - 930S - - 6/1997 -
Technical details
- ATMH Werkzeugmaschinenhandel GmbH
- Scharpenbergerstr.96-98
- 58256 Ennepetal
- Deutschland
-
+49 (0) 2333 / 403 43 70
+49 (0) 2333 / 403 43 75 -
info@atmh.de
www.atmh.de
#2065-S1866 · Hoist Traverse
UNBEKANNT - 2013.01 - 56 tonnen Tragkraft - - 2013 -
Technical details
Datasheet
Request / Contact
- Isabelle Knops
- Opladener Str. 126
- 40789 Monheim am Rhein
- Deutschland
-
+49 (0)2173-4999611
+49 (0)2173-8546560 -
isabelle.knops@isabelleknops.com
www.isabelleknops.com
#2013-E0246 · Hoist Traverse
Konecranes - 300 t - - 2009 -
Technical details
Crane/lifting beam/-traverse - Konecranes - Year of construction: 2009 Very good used condition. The inspection can take place at the factory by appointment. Description: - Load capacity: 300 tons - Range / distance of the attachment points: 15.500 mm - Net weight: 23 tons - Load double hook no.63 The lifting process is carried out with 2 cranes, which have a lifting capacity of of 230 and 100 t. The total load of 322 t is achieved by lifting ratio 4.7/10.8 R1 = 322*4.7/15.5 = 98 tons and R2 = 322-98 = 224 tons to the cranes according to the load capacity. Construction drawings available. There is no guarantee for correctness and completeness of the technical details and accessories. - Subject to prior sale -
- ATMH Werkzeugmaschinenhandel GmbH
- Scharpenbergerstr.96-98
- 58256 Ennepetal
- Deutschland
-
+49 (0) 2333 / 403 43 70
+49 (0) 2333 / 403 43 75 -
info@atmh.de
www.atmh.de
#2065-S1902 · Hoist Traverse
MKF - - - 2006 -
Technical details
dimension Length: about 3600mm Width: approx. 2700mm Height: ca.1300mm incl.
Datasheet
Request / Contact
- Markus Hirsch GmbH
- Hüttenstrasse 1
- 46284 Dorsten
- Deutschland
-
+49 2362 95035 12
+49 2362 95035 10 -
liersch@hirsch-maschinen.de
www.hirsch-maschinen.de
#1077-01328 · Hoist Traverse
ROEWI - - - 1986 -
Technical details
- Kurt Steiger Werkzeugmaschinen GmbH
- Flachstr. 11
- 65197 Wiesbaden
- Deutschland
-
+49 (0) 611/421047
+49 (0) 611/421040 -
info@kurt-steiger.de
www.kurt-steiger.de
#2043-17528 · Hoist Traverse
EHP - KGW 20 - - 1986 -
Technical details
Weighing range: 0-20000 kg
Accuracy: +/-0.1% of full scale
smallest increment: 10 kg
Bzkc7t80
Digit height: 50 mm
Readability at a distance: 50 m
Height (distance a hanger hooks): 790 mm
Weight: 160 kg
Datasheet
Request / Contact
- Markus Hirsch GmbH
- Hüttenstrasse 1
- 46284 Dorsten
- Deutschland
-
+49 2362 95035 12
+49 2362 95035 10 -
liersch@hirsch-maschinen.de
www.hirsch-maschinen.de
#1077-Z00104 · Hoist Traverse
KLOECKNER - - - 1972 -
Technical details
- Kurt Steiger Werkzeugmaschinen GmbH
- Flachstr. 11
- 65197 Wiesbaden
- Deutschland
-
+49 (0) 611/421047
+49 (0) 611/421040 -
info@kurt-steiger.de
www.kurt-steiger.de
#2043-25218a · Hoist Traverse
DEMAG - DKK 5 10 AL - - -
Technical details
approx. 120 pieces = 480 running meters of safety conductor rails
Number of conductors / number of poles: 5
Nkwcb
in standard lengths of: 4 m
Busbar cross section: 10 mm²
for mains voltage up to: 500 V
Load capacity at 100% ED: 60 A
Weight per meter: 2.1 kg
Datasheet
Request / Contact
- Kurt Steiger Werkzeugmaschinen GmbH
- Flachstr. 11
- 65197 Wiesbaden
- Deutschland
-
+49 (0) 611/421047
+49 (0) 611/421040 -
info@kurt-steiger.de
www.kurt-steiger.de
#2043-27153 · Hoist Traverse
HYDROBULL - ITI500N - - -
Technical details
Max.load capacity at 540 mm distance in front of the wheels: 500 kg
at 830 mm distance in front of the wheels: 360 kg
at a distance of 1120 mm in front of the wheels: 265 kg
at 1410 mm distance in front of the wheels: 210 kg
at 1700 mm distance in front of the wheels: 175 kg
large lifting height with large projection: 1736 mm
max.width: 794 mm
max. length with drawbar: 2285 mm
R0gu3fzj
Dead weight: 600 kg
Datasheet
Request / Contact
- Kurt Steiger Werkzeugmaschinen GmbH
- Flachstr. 11
- 65197 Wiesbaden
- Deutschland
-
+49 (0) 611/421047
+49 (0) 611/421040 -
info@kurt-steiger.de
www.kurt-steiger.de
#2043-251218 · Hoist Traverse
DEMAG - DKK 4 10 AL - - -
Technical details
approx. 120 pieces = 480 running meters
Becb7sf7mi
Number of conductors / number of poles: 4
in standard lengths: 4000 mm
for mains voltage up to: 500 V
Busbar cross section: 10 mm²
Weight: 2 kg / m
Load capacity at 100% ED: 60 A
Datasheet
Request / Contact